Bacteria-based chemiluminescence sensing system using β-galactosidase under the control of the ArsR regulatory protein of the ars operon

Imparting As(III) Responsiveness to the Choline Response Transcriptional Regulator BetI

The development of a low-cost and user-friendly sensor using microorganisms to monitor the presence of As(III) on earth has garnered significant attention. In conventional research on microbial As(III) sensors, the focus has been on transcription factor ArsR, which plays a role in As(III) metabolism. However, we recently discovered that LuxR, a quorum-sensing control factor in Vibrio fischeri that contains multiple cysteine residues, acted as an As(III) sensor despite having no role in As(III) metabolism. This finding suggested that any protein could be an As(III) sensor if cysteine residues were incorporated. In this study, we aimed to confer As(III) responsiveness to BetI, a transcriptional repressor of the TetR family involved in osmotic regulation of the choline response, unrelated to As(III) metabolism. Based on the BetI structure constructed using molecular dynamics calculations, we generated a series of mutants in which each of the three amino acids not critical for function was substituted with cysteine. Subsequent examination of their response to As(III) revealed that the cysteine-substituted mutant, incorporating all three substitutions, demonstrated As(III) responsiveness. This was evidenced by the fluorescence intensity of the downstream reporter superfolder green fluorescent protein expression regulated by the operator region. Intriguingly, the BetI cysteine mutant maintained its binding responsiveness to the natural ligand choline. We successfully engineered an OR logic gate capable of responding to two orthogonal ligands using a single protein.

Microbial whole-cell biosensors: Current applications, challenges, and future perspectives

Microbial Whole-Cell Biosensors (MWCBs) have seen rapid development with the arrival of 21st century biological and technological capabilities. They consist of microbial species which produce, or limit the production of, a reporter protein in the presence of a target analyte. The quantifiable signal from the reporter protein can be used to determine the bioavailable levels of the target analyte in a variety of sample types at a significantly lower cost than most widely used and well-established analytical instrumentation. Furthermore, the versatile and robust nature of MWCBs shows great potential for their use in otherwise unavailable settings and environments. While MWCBs have been developed for use in biomedical, environmental, and agricultural monitoring, they still face various challenges before they can transition from the laboratory into industrialized settings like their enzyme-based counterparts. In this comprehensive and critical review, we describe the underlying working principles of MWCBs, highlight developments for their use in a variety of fields, detail challenges and current efforts to address them, and discuss exciting implementations of MWCBs helping redefine what is thought to be possible with this expeditiously evolving technology.

Engineering genetically encoded FRET-based nanosensors for real time display of arsenic (As3+) dynamics in living cells

Arsenic poisoning has been a major concern that causes severe toxicological damages. Therefore, intricate and inclusive understanding of arsenic flux rates is required to ascertain the cellular concentration and establish the carcinogenetic mechanism of this toxicant at real time. The lack of sufficiently sensitive sensing systems has hampered research in this area. In this study, we constructed a fluorescent resonance energy transfer (FRET)-based nanosensor, named SenALiB (Sensor for Arsenic Linked Blackfoot disease) which contains a metalloregulatory arsenic-binding protein (ArsR) as the As³⁺ sensing element inserted between the FRET pair enhanced cyan fluorescent protein (ECFP) and Venus. SenALiB takes advantage of the ratiometic FRET readout which measures arsenic with high specificity and selectivity. SenALiB offers rapid detection response, is stable to pH changes and provides highly accurate, real-time optical readout in cell-based assays. SenALiB-676n with a binding constant (K_d) of 0.676 × 10⁻⁶ M is the most efficient affinity mutant and can be a versatile tool for dynamic measurement of arsenic concentration in both prokaryotes and eukaryotes in vivo in a non-invasive manner.

Transcriptional regulatory proteins as biosensing tools

We have developed sensing systems employing different classes of transcriptional regulatory proteins genetically and chemically modified to incorporate a fluorescent reporter molecule for detection of arsenic, hydroxylated polychlorinated biphenyls (OH-PCBs), and cyclic AMP (cAMP). These are the first examples of optical sensing systems based on transcriptional regulatory proteins.

An electrochemical immunosensor for efficient detection of uropathogenic E. coli based on thionine dye immobilized chitosan/functionalized-MWCNT modified electrode

Uropathogenic Escherichia coli (UPEC) is the major cause of 150 million Urinary Tract Infections (UTI) reported annually world-wide. High prevalence of multi-drug-resistance makes it dangerous and difficult to cure. Therefore simple, quick and early diagnostic tools are essential for effective treatment and control. We report an electrochemical immunosensor based on thionine dye (Th) immobilized on functionalized-multiwalled carbon nanotube+chitosan composite coated on glassy carbon electrode (GCE/f-MWCNT-Chit@Th) for quick and sensitive detection of UPEC in aqueous solution. This immunosensor was constructed by sequential immobilization of UPEC, bovine serum albumin, primary antibody and Horse Radish Peroxidase (HRP) tagged secondary antibody on the surface of GCE/f-MWCNT-Chit@Th. When analyzed using 2.5mM of hydrogen peroxide reduction reaction using cyclic voltammetry in phosphate buffer, pH 7.0, the immunosensor showed excellent linearity in a range of 10(2)-10(9)cfu of UPEC mL(-1) with a current sensitivity of 7.162μA {log(cfumL(-1))}(-1). The specificity of this immunosensor was tested using other UTI and non-UTI bacteria, Staphylococcus, Klebsiella, Proteus and Shigella. The clinical applicability of the immunosensor was also successfully tested directly in UPEC spiked urine samples (simulated sample).

Evolved bacterial biosensor for arsenite detection in environmental water

Arsenic, a ubiquitous presence in the biosphere, often occurs from both natural and anthropogenic sources. Bacterial biosensors based on genetically engineered bacteria have promising applications in detecting the chemical compound and its toxicity. However, most of the bacteria biosensors take advantage of the existing wild-type substrate-induced promoters, which are often low in specificity, affinity and sensitivity, and thus limiting their applications in commercial or field use. In this study, we developed an in vivo evolution procedure with a bidirectional selection scheme for improving the sensitivity of an arsenite-responsive bacterial biosensor through optimization of the inducible operon. As a proof of concept, we evolved the arsenite-induced arsR operon for both low background and high expression through three successive rounds of fluorescence activated cell sorting (FACS) with bidirectional strategy. An arsR operon variant with 12-fold higher activity over the control was isolated, confirming multiple rounds of construction and screening of mutation library, as described here, can be efficiently applied to bacterial biosensor optimization. The evolved arsenite-responsive biosensor demonstrated an excellent performance in the detection of low trace arsenite in environmental water. These results indicate that the technologies of directed evolution could be used to improve the performance of bacterial biosensors, which will be helpful in promoting the practical application of bacterial biosensors.

Fiber-optic based cell sensors

Different whole cell fiber optic based biosensors have been developed to detect the total effect of a wide range of environmental pollutants, providing results within a very short period. These biosensors are usually built from three major components, the biorecognition element (whole-cells) intimately attached to a transducer (optic fiber) using a variety of techniques (adsorption, covalent binding, polymer trapping, etc). Even with a great progress in the field of biosensors, there is still a serious lack of commercial applications, capable of competing with traditional analytical tools.

Internal arsenite bioassay calibration using multiple bioreporter cell lines

Bioassays with bioreporter bacteria are usually calibrated with analyte solutions of known concentrations that are analysed along with the samples of interest. This is done as bioreporter output (the intensity of light, fluorescence or colour) does not only depend on the target concentration, but also on the incubation time and physiological activity of the cells in the assay. Comparing the bioreporter output with standardized colour tables in the field seems rather difficult and error‐prone. A new approach to control assay variations and improve application ease could be an internal calibration based on the use of multiple bioreporter cell lines with drastically different reporter protein outputs at a given analyte concentration. To test this concept, different Escherichia coli‐based bioreporter strains expressing either cytochrome c peroxidase (CCP, or CCP mutants) or β‐galactosidase upon induction with arsenite were constructed. The reporter strains differed either in the catalytic activity of the reporter protein (for CCP) or in the rates of reporter protein synthesis (for β‐galactosidase), which, indeed, resulted in output signals with different intensities at the same arsenite concentration. Hence, it was possible to use combinations of these cell lines to define arsenite concentration ranges at which none, one or more cell lines gave qualitative (yes/no) visible signals that were relatively independent of incubation time or bioreporter activity. The discriminated concentration ranges would fit very well with the current permissive (e.g. World Health Organization) levels of arsenite in drinking water (10 µg l⁻¹).

Microbial reporters of metal bioavailability

When attempting to assess the extent and the implications of environmental pollution, it is often essential to quantify not only the total concentration of the studied contaminant but also its bioavailable fraction: higher bioavailability, often correlated with increased mobility, signifies enhanced risk but may also facilitate bioremediation. Genetically engineered microorganisms, tailored to respond by a quantifiable signal to the presence of the target chemical(s), may serve as powerful tools for bioavailability assessment. This review summarizes the current knowledge on such microbial bioreporters designed to assay metal bioavailability. Numerous bacterial metal‐sensor strains have been developed over the past 15 years, displaying very high detection sensitivities for a broad spectrum of environmentally significant metal targets. These constructs are based on the use of a relatively small number of gene promoters as the sensing elements, and an even smaller selection of molecular reporter systems; they comprise a potentially useful panel of tools for simple and cost‐effective determination of the bioavailability of heavy metals in the environment, and for the quantification of the non‐bioavailable fraction of the pollutant. In spite of their inherent advantages, however, these tools have not yet been put to actual use in the evaluation of metal bioavailability in a real environmental remediation scheme. For this to happen, acceptance by regulatory authorities is essential, as is a standardization of assay conditions.

Nucleic acid aptamers for biosensors and bio-analytical applications

Oligonucleotides were once considered only functional as molecules for the storage of genetic information. However, the discovery of RNAzymes, and later, DNAzymes, unravelled the innate potential of oligonucleotides in many other biological applications. In the last two decades, these applications have been further expanded through the introduction of Systematic Evolution of Ligands by EXponential enrichment (SELEX) which has generated, by repeated rounds of in vitro selection, a type of molecular probe termed aptamers. Aptamers are oligonucleic acid (or peptide) molecules that can bind to various molecular targets and are viewed as complements to antibodies. Aptamers have found applications in many areas, such as bio-technology, medicine, pharmacology, microbiology, and analytical chemistry, including chromatographic separation and biosensors. In this review, we focus on the use of aptamers in the development of biosensors. Coupled with their ability to bind a variety of targets, the robust nature of oligonucleotides, in terms of synthesis, storage, and wide range of temperature stability and chemical manipulation, makes them highly suitable for biosensor design and engineering. Among the many design strategies, we discuss three general paradigms that have appeared most frequently in the literature: structure-switching, enzyme-based, and aptazyme-based designs.

A whole-cell assay for the high throughput screening of calmodulin antagonists

Cell-based screening systems for pharmaceuticals are desired over molecular biosensing systems because of the information they provide on toxicity and bioavailability. However, the majority of sensing systems developed are molecular biosensing type screening systems and cannot be easily adapted to cell-based screening. In this study, we demonstrate that protein-based molecular sensing systems that employ a fluorescent protein as a signal transducer are amenable to cell-based sensing by expressing the protein molecular sensing system in the cell and employing these cells for screening of desired molecules. To achieve this, we expressed a molecular sensing system based on the fusion protein of calmodulin (CaM) and enhanced green fluorescent protein (EGFP) in bacterial cells, and utilized these cells for the screening of CaM antagonists. In the presence of Ca(2+), CaM undergoes a conformational change exposing a hydrophobic pocket that interacts with CaM-binding proteins, peptides, and drugs. This conformational change induced in CaM leads to a change in the microenvironment of EGFP, resulting in a change in its fluorescence intensity. The observed change in fluorescence intensity of EGFP can be correlated to the concentration of the analyte present in the sample. Dose-response curves for various tricyclic antidepressants were generated using cells containing CaM-EGFP fusion protein. Additionally, we demonstrate the versatility of our system for studying protein-protein interactions by using cells to study the binding of a peptide to CaM. The study showed that the CaM-EGFP fusion protein within the intact cells responds similarly to that of the isolated fusion protein, hence eliminating the need for any isolation and purification steps. We have demonstrated that this system can be used for the rapid screening of various CaM antagonists that are potential antipsychotic drugs.

Novel biofiltration methods for the treatment of heavy metals from industrial wastewater

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into the wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. In the present review paper, the sources have discussed the industrial source of heavy metals contamination in water, their toxic effects on the fauna and flora and the regulatory threshold limits of these heavy metals. The various parameters of the biofiltration processes, their mechanism for heavy metals removal along with the kinetics of biofilters and its modeling aspects have been discussed. The comparison of various physico-chemical treatment and the advantages of biofiltration over other conventional processes for treatment of heavy metals contaminated wastewater have also been discussed. The applications of genetic engineering in the modification of the microorganisms for increasing the efficiency of the biofiltration process for heavy metals removal have been critically analyzed. The results show that the efficiency of the process can be increased three to six folds with the application of recombinant microbial treatment.

Development of RNR3- and RAD54-GUS reporters for testing genotoxicity in Saccharomyces cerevisiae

S. cerevisiae RNR3 and RAD54 gene transcription becomes strongly activated upon DNA damage. This property was used to construct yeast strains in which DNA damage can be monitored by a very sensitive fluorogenic assay in a convenient 96-well microtiter plate format. These strains carried stably integrated fusions of RNR3 or RAD54 promoters to the E. coli beta-glucuronidase GUS gene. GUS activity was measured by fluorogenic detection, a method that greatly increases the precision and sensitivity of the assay. Detection levels were similar to those of real-time quantitative PCR methods and close to the limits of biological response. The two reporters differed in terms of fold-induction, activation kinetics, sensitivity and specificity upon exposure to a variety of genotoxic compounds. While RNR3-GUS showed the fastest response, RAD54-GUS showed the highest sensitivity: similar to previous reported sensitivities for bacterial and eukaryotic genotoxic detection systems. These reporter strains may complement current genotoxicity tests, but they also have the advantages of higher flexibility, requirement for shorter incubation times, and the capability of being fully automated. In addition, the intrinsic features of the system facilitate its easy improvement by genetic manipulating the yeast strain or by introducing mammalian metabolizing enzymes.

Novel reporter gene in a fluorescent-based whole cell sensing system

A common problem encountered when using fluorescence detection in real samples analysis is that the matrix may contain compounds that autofluorescence or that can be excited at the wavelengths of commonly employed fluorescent reporter molecules. This causes an increase in background fluorescence, which in turn tends to compromise the detection limits of the system. To address this issue, we investigated the use of a reporter enzyme that produces fluorescent compounds, which can be excited at wavelengths that are not commonly encountered in compounds present in real samples. For that, a whole cell-based sensing system for arsenite that employs cobA as the reporter gene was developed. The system utilizes genetically engineered bacteria that incorporate the specificity of the ars operon with the sensitivity of the cobA gene. The cobA gene codes for uroporphyrinogen III methyltransferase that converts the substrate uroporphyrinogen (urogen) III into two fluorescent compounds sirohydrochlorin and trimethylpyrrocorphin. Urogen III is ubiquitous within the cell, however, because the cells use it for vitamin B12 and siroheme biosynthesis, this sensing system is limited by substrate availability. By supplementing the media with ALA, a precursor of urogen III, a more stable and reproducible response was obtained. We observed three excitation maxima at 357, 378, and 498 nm, with a single emission maximum at 605 nm. Excitation at 498 nm was selected because it results in less background interference as most endogenous substances are not active at this wavelength. Advantages and limitations of using the cobA gene in whole-cell sensing applications are presented.

Bioluminescent bacterial biosensors for the assessment of metal toxicity and bioavailability in soils

A major factor governing the toxicity of heavy metals in soils is their bioavailability. Traditionally, sequential extraction procedures using different extractants followed by chemical analysis have been used for determining the biologically available fraction of metals in soils. Yet, the transfer of results obtained on non-biological systems to biological ones is certainly questionable. Therefore, bioluminescence-based bacterial biosensors have been developed using genetically engineered microorganisms, constructed by fusing transcriptionally active components of metal resistance mechanisms to lux genes from naturally bioluminescent bacteria like Vibrio fischeri for the assessment of metal toxicity and bioavailability in polluted soils. As compared to chemical methods, bacterial biosensors present certain advantages, such as selectivity, sensitivity, simplicity, and low cost. Despite certain inherent limitations, bacterial bioluminescent systems have proven their usefulness in soils under laboratory and field conditions. Finally, green fluorescent protein-based bacterial biosensors are also applicable for determining with high sensitivity the bioavailability of heavy metals in soil samples.

Fluorescence-based sensing system for copper using genetically engineered living yeast cells

A whole cell-based optical sensing system for copper was developed based on Saccharomyces cerevisiae cells harboring plasmid pYEX-GFPuv. The basis of this system was the ability of the transcriptional activator protein Ace1 present in S. cerevisiae to control the expression of the reporter protein, GFPuv. When copper ions are present in the sample, the Ace1 protein activates the cup1 promoter located upstream from the gfpuv gene in plasmid pYEX-GFPuv, thus inducing the production of GFPuv. The concentration of copper ions in the sample can then be related to the GFPuv expressed in the yeast. The amount of GFPuv produced in the system was determined by monitoring the fluorescence emitted at 507 nm after excitation at 397 nm. This system can detect copper at concentrations as low as 5 x 10(-7) M, and is selective for copper over a variety of metal ions, with the exception of silver. The applicability of this sensing system to different analytical platforms and in real samples is demonstrated.

Whole-cell-reporter-gene-based biosensing systems on a compact disk microfluidics platform

Biosensing systems such as reporter-gene-based whole-cell assays are increasingly finding applications in biological and environmental screening. A whole-cell approach to such analyses can provide valuable information about the bioavailable level of a compound of interest. These biosensing systems rely on the molecular recognition of a specific analyte by a regulatory protein and, therefore, can detect low levels of the target analyte. In this study, Escherichia coli cells containing plasmid pSD10 were engineered to sense the model target analytes arsenite and antimonite, the target analytes in this study. The biosensing system takes advantage of the recognition of the regulatory protein, ArsR, for arsenite and antimonite to produce the reporter protein, which in this case is GFPuv. The fluorescence emitted by the GFPuv in the cells can be directly related to the concentration of the analyte in the cell, making this biosensing system useful in the detection of arsenite and/or antimonite in a variety of samples. Miniaturization of biosensing systems can further enhance their utility by decreasing reagent consumption and analysis time and by allowing for the high-throughput screening of samples. To that end, we employed a microcentrifugal microfluidics platform that has low power, space, and reagent requirements, increased speed of detection, and the potential for portability. Herein, we demonstrate for the first time the adaptation of a whole-cell sensing system to a microcentrifugal microfluidics platform. Moreover, we were able to detect our target analytes in a rapid and sensitive manner compared to conventional sensing methods.

Stress responsive bacteria: biosensors as environmental monitors

The delicate and dynamic balance of the physiological steady state and its maintenance is well characterized by studies of bacterial stress response. Through the use of genetic analysis, numerous stress regulons, their physiological regulators and their biochemical processes have been delineated. In particular, transcriptionally activated stress regulons are subjects of study and application. These regulons include those that respond to macromolecular damage and toxicity as well as to nutrient starvation. The convenience of reporter gene fusions has allowed the creation of biosensor strains, resulting from the fusion of stress-responsive promoters with a variety of reporter genes. Such cellular biosensors are being used for monitoring dynamic systems and can report the presence of environmental stressors in real time. They provide a greater range of sensitivity, e.g. to sub-lethal concentrations of toxicants, than the simple assessment of cell viability. The underlying physiological context of the reporter strains results in the detection of bioavailable concentrations of both toxicants and nutrients. Culture conditions and host strain genotypes can be customized so as to maximize the sensitivity of the strain for a particular application. Collections of specific strains that are grouped in panels are used to diagnose targets or mode of action for unknown toxicants. Further application in massive by parallel DNA and gene fusion arrays greatly extends the information available for diagnosis of modes of action and may lead to development of novel high-throughput screens. Future studies will include more panels, arrays, as well as single reporter cell detection for a better understanding of the population heterogeneity during stress response. New knowledge of physiology gained from further studies of novel systems, or using innovative methods of analysis, will undoubtedly yield still more useful and informative environmental biosensors.

Issues underlying use of biosensors to measure metal bioavailability

Heavy metal-mediated toxicity in the environment is dependent on bioavailable metal concentrations both internal and external to microbial cells. Both internal and external metal bioavailability are influenced by multiple factors in the soil environment. External factors include pH, redox potential, ionic strength, organic matter and clay content. The internal bioavailable metal concentration is dependent on both the aforementioned external factors, as well as metal uptake and efflux activities that are specific for each microorganism. The metal-specific biosensors discussed in this article can be used to measure internal metal bioavailability.

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.

Luminescence-based whole-cell-sensing systems for cadmium and lead using genetically engineered bacteria

Whole-cell-based sensing systems that respond to cadmium and lead ions have been designed and developed using genetically engineered bacteria. These systems take advantage of the ability of certain bacteria to survive in environments polluted with cadmium and lead ions. The bacteria used in this investigation have been genetically engineered to produce reporter proteins in response to the toxic ions. This was achieved by modifying a strain of Escherichia colito harbor plasmids pYSC1 and pYS2/pYSG1. In these dual-plasmid-based sensing systems, the expression of the reporters beta-galactosidase and red-shifted green fluorescent protein (rs-GFP) was controlled by CadC, the regulatory protein of the cad operon. Regulation of the expression of the reporter proteins is related to the amount of cadmium and lead ions employed to induce the bacteria. The bacterial sensing systems were found to respond to cadmium, lead, and zinc ions, and had no significant response to nickel, copper, manganese, and cobalt.

Antimony bioavailability in mine soils

Five British former mining and smelting sites were investigated and found to have levels of total Sb of up to 700 mg kg(-1), indicating high levels of contamination which could be potentially harmful. However, this level of Sb was found to be biologically unavailable over a wide range of pH values, indicating that Sb is relatively unreactive and immobile in the surface layers of the soil, remaining where it is deposited rather than leaching into lower horizons and contaminating ground water. Sb, sparingly soluble in water, was unavailable to the bacterial biosensors tested. The bioluminescence responses were correlated to levels of co-contaminants such as arsenic and copper, rather than to Sb concentrations. This suggests that soil contamination by Sb due to mining and smelting operations is not a severe risk to the environment or human health provided that it is present as immobile species and contaminated sites are not used for purposes which increase the threat of exposure to identified receptors. Co-contaminants such as arsenic and copper are more bioavailable and may therefore be seen as a more significant risk.

Determination of prostacyclin in plasma through a bioluminescent immunoassay for 6-keto-prostaglandin F1alpha: implication of dosage in patients with primary pulmonary hypertension

This work describes a solid-phase immunoassay for 6-keto-prostaglandin F1alpha, the stable hydrolysis product of prostacyclin (prostaglandin I2). Prostacyclin, a potent vasodilator with antiplatelet and antiproliferative properties is an effective treatment for primary pulmonary hypertension and pulmonary arterial hypertension associated with scleroderma and scleroderma-like syndrome. Levels of 6-keto-prostaglandin F1alpha can be directly correlated with levels of prostacyclin. Therefore, 6-keto-prostaglandin F1alpha, has become the indicator of choice to measure prostacyclin levels. The single-step immunoassay for 6-keto-prostaglandin F1alpha reported here was developed using the bioluminescent protein aequorin as a label. Analyte-label conjugates were constructed by linking the carboxyl group of 6-keto-prostaglandin F1alpha and lysine residues of aequorin by chemical conjugation methods. The binding properties of 6-keto-prostaglandin F1alpha toward its antibody and the bioluminescent properties of aequorin were retained in the conjugate, which was then used to generate a dose-response curve for the analyte in a convenient microtiter plate format. The concentration of 6-keto-prostaglandin F1alpha after extraction from plasma showed good correlation with the concentration of 6-ketoprostaglandin F1alpha obtained without prior extraction of the same plasma sample. This measurement demonstrated that the assay allows the measurement of 6-keto-prostaglandin F1alpha directly in plasma without any pretreatment of the samples, which results in a much simpler method with a faster assay time.

Assessment of bioavailable arsenic and copper in soils and sediments from the Antofagasta region of northern Chile

Copper levels of nearly 500 mg l(-1) were measured in aqueous extracts of soil and sediment samples from the lowlands of Antofagasta. Arsenic levels of up to 183 mg l(-1) were found in river sediments, and 27.5 mg l(-1) arsenic was found at the location of a dam where potable water is extracted. This indicates that the arsenic contamination of water supplies reported recently for the pre-Andes may be a widespread problem throughout the region. Copper contamination from smelting activities also provides cause for concern as elevated levels were found in aqueous extracts of soil up to 20 km away from a smelter. This study went beyond traditional chemical analysis by assessing the potential benefits of using microbial biosensors as an alternative to determination of chemical speciation, to provide an environmentally relevant interpretation of soil/sediment residue levels. This approach is simple to use and enables a rapid, low cost assessment of pollutant bioavailability. It may, therefore, be of use for further investigations in the region and beyond.

An immunoassay for Leu-enkephalin based on a C-terminal aequorin-peptide fusion

Recently we demonstrated that the fusion of an octapeptide to the C-terminus of a cysteine-free mutant of aequorin showed no inhibitory effect on the luminescence activity of the photoprotein. This observation is of particular importance when the use of aequorin as a label in the development of immunoassays for peptides whose activity lies in their C-terminal region or the epitope for antibody recognition is at their C-terminus is desired. In the case of opioid peptides, antibodies are directed toward their C-terminus as they differ from each other at this terminus. The goal of this study was to develop an immunoassay for Leu-enkephalin, a mammalian opioid peptide, using a C-terminal aequorin-peptide fusion protein. For that, the N-terminus of Leu-enkephalin was genetically fused to the C-terminus of a cysteine-free mutant of aequorin. It was observed that the C-terminal conjugated aequorin maintained its luminescence activity. An immunoassay for Leu-enkephalin was then developed using the aequorin-Leu-enkephalin fusion protein as a labeled analyte in a competitive as well as in a sequential binding mode. It was demonstrated that aequorin can be used as a label in peptide assays in which it is critical that the peptide's C-terminus be free for activity and/or for antibody recognition.

Factors influencing expression of luxCDABE and nah genes in Pseudomonas putida RB1353(NAH7, pUTK9) in dynamic systems

Bioluminescent reporter organisms have been successfully exploited as analytical tools for in situ determination of bioavailable levels of contaminants in static environmental samples. Continued characterization and development of such reporter systems is needed to extend the application of these bioreporters to in situ monitoring of degradation in dynamic environmental systems. In this study, the naphthalene-degrading, lux bioreporter bacterium Pseudomonas putida RB1353 was used to evaluate the relative influences of cell growth stage, cell density, substrate concentration, oxygen tension, and background carbon substrates on both the magnitude of the light response and the rate of salicylate disappearance. The effect of these variables on the lag time required to obtain maximum luminescence and degradation was also monitored. Strong correlations were observed between the first three factors and both the magnitude and induction time of luminescence and degradation rate. The maximum luminescence response to nonspecific background carbon substrates (soil extract broth or Luria broth) was 50% lower than that generated in response to 1 mg of sodium salicylate liter(-1). Oxygen tension was evaluated over the range of 0.5 to 40 mg liter(-1), with parallel inhibition to luminescence and degradation rate (20 mg of sodium salicylate liter(-1)) observed at 1.5 mg liter(-1) and below and no effect observed above 5 mg liter(-1). Oxygen tensions from 2 to 4 mg liter(-1) influenced the magnitude of luminescence but not the salicylate degradation rate. The results suggest that factors causing parallel shifts in the magnitude of both luminescence and degradation rate were influencing regulation of the nah operon promoters. For factors that cause nonparallel shifts, other regulatory mechanisms are explored. This study demonstrates that lux reporter bacteria can be used to monitor both substrate concentration and metabolic response in dynamic systems. However, each lux reporter system and application will require characterization and calibration.