Physical properties of liposomes and proteoliposomes prepared from Escherichia coli polar lipids

Expression and functional analysis of a recombinant aquaporin Z from Antarctic Pseudomonas sp. AMS3

Aquaporin (AQP) is a water channel protein from the family of transmembrane proteins which facilitates the movement of water across the cell membrane. It is ubiquitous in nature, however the understanding of the water transport mechanism, especially for AQPs in microbes adapted to low temperatures, remains limited. AQP also has been recognized for its ability to be used for water filtration, but knowledge of the biochemical features necessary for its potential applications in industrial processes has been lacking. Therefore, this research was conducted to express, extract, solubilize, purify, and study the functional adaptations of the aquaporin Z family from Pseudomonas sp. AMS3 via molecular approaches. In this study, AqpZ1 AMS3 was successfully subcloned and expressed in E. coli BL21 (DE3) as a recombinant protein. The AqpZ1 AMS3 gene was expressed under optimized conditions and the best optimized condition for the AQP was in 0.5 mM IPTG incubated at 25°C for 20 h induction time. A zwitterionic mild detergent [(3-cholamidopropyl) dimethylammonio]-1-propanesulfonate was the suitable surfactant for the protein solubilization. The protein was then purified via affinity chromatography. Liposome and proteoliposome was reconstituted to determine the particle size using dynamic light scattering. This information obtained from this psychrophilic AQP identified provides new insights into the structural adaptation of this protein at low temperatures and could be useful for low temperature application and molecular engineering purposes in the future.

A thermodynamic analysis of CLC transporter dimerization in lipid bilayers

The CLC-ec1 chloride/proton antiporter is a membrane-embedded homodimer with subunits that can dissociate and associate, but the thermodynamic driving forces favor the assembled dimer at biological densities. Yet, the physical reasons for this stability are confounding as dimerization occurs via the burial of hydrophobic interfaces away from the lipid solvent. For binding of nonpolar surfaces in aqueous solution, the driving force is often attributed to the hydrophobic effect, but this should not apply in the membrane since there is very little water. To investigate this further, we quantified the thermodynamic changes associated with CLC dimerization in membranes by carrying out a van 't Hoff analysis of the temperature dependency of the free energy of dimerization, ΔG°. To ensure that the reaction reached equilibrium at different temperatures, we utilized a Förster resonance energy transfer assay to report on relaxation kinetics of subunit exchange as a function of temperature. Equilibration times were then applied to measure CLC-ec1 dimerization isotherms at different temperatures using the single-molecule subunit-capture photobleaching analysis approach. The results demonstrate that the dimerization free energy of CLC in Escherichia coli-like membranes exhibits a nonlinear temperature dependency corresponding to a large, negative change in heat capacity, a signature of solvent ordering effects such as the hydrophobic effect. Consolidating this with our previous molecular analyses suggests that the nonbilayer defect required to solvate the monomeric state is one source of the observed change in heat capacity and indicates the existence of a generalizable driving force for protein association in membranes.

Enzymatic Janus Liposome Micromotors

A liposome-based micromotor system that utilizes regional enzymatic conversion and gas generation to achieve directional motion in water is presented. Constituted mainly of a low-melting lipid and a high-melting lipid together with cholesterol, these liposomes maintain stable Janus configuration at room temperature as a result of lipid liquid-liquid phase separation. Local placement of enzymes such as horseradish peroxidase is realized via affinity binding between avidin and biotin, the latter as a lipid conjugate sorted specifically into one domain of these Janus liposomes as a minor component. In the presence of the substrate, hydrogen peroxide, these enzyme-decorated Janus liposomes undergo directional motion, yielding velocities exceeding thermal diffusion by three folds in some cases. Experimental details on liposome size control, motor assembly, and substrate distribution are presented; effects of key experimental factors on liposome motion, such as substrate concentration and liposome Janus ratio, are also examined. This work thus provides a viable approach to building asymmetrical lipid-assembled, enzyme-attached colloids and, in addition, stresses the importance of asymmetry in achieving particle directional motion.

A thermodynamic analysis of CLC transporter dimerization in lipid bilayers

The CLC-ec1 chloride/proton antiporter is a membrane embedded homodimer where subunits can dissociate and associate, but the thermodynamic driving forces favor the assembled form at biological densities. Yet, the physical reasons for this stability are confounding since binding occurs via the burial of hydrophobic protein interfaces yet the hydrophobic effect should not apply since there is little water within the membrane. To investigate this further, we quantified the thermodynamic changes associated with CLC dimerization in membranes by carrying out a van 't Hoff analysis of the temperature dependency of the free energy of dimerization, ΔG° . To ensure that the reaction reached equilibrium under changing conditions, we utilized a Förster Resonance Energy Transfer based assay to report on the relaxation kinetics of subunit exchange as a function of temperature. These equilibration times were then applied to measure CLC-ec1 dimerization isotherms as a function of temperature using the single-molecule subunit-capture photobleaching analysis approach. The results demonstrate that the dimerization free energy of CLC in E. coli membranes exhibits a non-linear temperature dependency corresponding to a large, negative change in heat capacity, a signature of solvent ordering effects including the hydrophobic effect. Consolidating this with our previous molecular analyses suggests that the non-bilayer defect required to solvate the monomeric state is the molecular source of this large change in heat capacity and is a major and generalizable driving force for protein association in membranes.

Ultrafast energy transfer between lipid-linked chromophores and plant light-harvesting complex II

Light-Harvesting Complex II (LHCII) is a membrane protein found in plant chloroplasts that has the crucial role of absorbing solar energy and subsequently performing excitation energy transfer to the reaction centre subunits of Photosystem II. LHCII provides strong absorption of blue and red light, however, it has minimal absorption in the green spectral region where solar irradiance is maximal. In a recent proof-of-principle study, we enhanced the absorption in this spectral range by developing a biohybrid system where LHCII proteins together with lipid-linked Texas Red (TR) chromophores were assembled into lipid membrane vesicles. The utility of these systems was limited by significant LHCII quenching due to protein-protein interactions and heterogeneous lipid structures. Here, we organise TR and LHCII into a lipid nanodisc, which provides a homogeneous, well-controlled platform to study the interactions between TR molecules and single LHCII complexes. Fluorescence spectroscopy determined that TR-to-LHCII energy transfer has an efficiency of at least 60%, resulting in a 262% enhancement of LHCII fluorescence in the 525-625 nm range, two-fold greater than in the previous system. Ultrafast transient absorption spectroscopy revealed two time constants of 3.7 and 128 ps for TR-to-LHCII energy transfer. Structural modelling and theoretical calculations indicate that these timescales correspond to TR-lipids that are loosely- or tightly-associated with the protein, respectively, with estimated TR-to-LHCII separations of ∼3.5 nm and ∼1 nm. Overall, we demonstrate that a nanodisc-based biohybrid system provides an idealised platform to explore the photophysical interactions between extrinsic chromophores and membrane proteins with potential applications in understanding more complex natural or artificial photosynthetic systems.

Bacteria and Archaea: A new era of cancer therapy

Cancer is one of the most important mortality in the world. The major drawbacks of chemotherapy are the poor absorption of drugs into tumor tissues and development of resistance against anti-cancer agents. To overcome these limitations, the use of microorganisms has been extensively considered in the treatment of cancer. Microorganisms (bacteria/Archaea) secrete different bioactive compounds that can efficiently inhibit cancer cells growth. Biological nanocarriers derived from microorganisms including outer membrane vesicles (OMVs), bacterial ghosts (BGs) and archaeosomes have also been considered as drug delivery systems. Conjugation of drug loaded nanocarriers to bacteria strongly kills the cancer cells after internalization through the bacteria. Merging of microbiology and nanotechnology may provide versatile microbial nano-hybrids for promising treatment of cancer. This strategy causes more amount of drug to enter into cancer cells. In this review, we present evidence that microorganism, their derivatives as well as their intervention with nanotechnology can be a powerful vehicle for eradication cancer.

Native-like membrane models of E. coli polar lipid extract shed light on the importance of lipid composition complexity

BACKGROUND

Lipid-protein interactions stabilize protein oligomers, shape their structure, and modulate their function. Whereas in vitro experiments already account for the functional importance of lipids by using natural lipid extracts, in silico methods lack behind by embedding proteins in single component lipid bilayers. However, to accurately complement in vitro experiments with molecular details at very high spatio-temporal resolution, molecular dynamics simulations have to be performed in natural(-like) lipid environments.

RESULTS

To enable more accurate MD simulations, we have prepared four membrane models of E. coli polar lipid extract, a typical model organism, each at all-atom (CHARMM36) and coarse-grained (Martini3) representations. These models contain all main lipid headgroup types of the E. coli inner membrane, i.e., phosphatidylethanolamines, phosphatidylglycerols, and cardiolipins, symmetrically distributed between the membrane leaflets. The lipid tail (un)saturation and propanylation stereochemistry represent the bacterial lipid tail composition of E. coli grown at 37∘C until 3/4 of the log growth phase. The comparison of the Simple three lipid component models to the complex 14-lipid component model Avanti over a broad range of physiologically relevant temperatures revealed that the balance of lipid tail unsaturation and propanylation in different positions and inclusion of lipid tails of various length maintain realistic values for lipid mobility, membrane area compressibility, lipid ordering, lipid volume and area, and the bilayer thickness. The only Simple model that was able to satisfactory reproduce most of the structural properties of the complex Avanti model showed worse agreement of the activation energy of basal water permeation with the here performed measurements. The Martini3 models reflect extremely well both experimental and atomistic behavior of the E. coli polar lipid extract membranes. Aquaporin-1 embedded in our native(-like) membranes causes partial lipid ordering and membrane thinning in its vicinity. Moreover, aquaporin-1 attracts and temporarily binds negatively charged lipids, mainly cardiolipins, with a distinct cardiolipin binding site in the crevice at the contact site between two monomers, most probably stabilizing the tetrameric protein assembly.

CONCLUSIONS

The here prepared and validated membrane models of E. coli polar lipids extract revealed that lipid tail complexity, in terms of double bond and cyclopropane location and varying lipid tail length, is key to stabilize membrane properties over a broad temperature range. In addition, they build a solid basis for manifold future simulation studies on more realistic lipid membranes bridging the gap between simulations and experiments.

Electroformation of liposomes and phytosomes using copper electrode

A novel method for electroformation of liposomes and phytosomes using copper electrode is described. Liposomes made at 2 V and 10 Hz AC field from L-α-egg-phosphatidylcholine (egg-PC), K. pneumoniae phosphatidylethanolamine, K. pneumoniae polar lipids and E. coli polar lipids on copper electrode were (777.9 ± 118.4), (370.2 ± 100.5), (825.3 ± 21.54), and (281.3 ± 42.3) nm in diameter, respectively. Giant vesicles were formed at 30 V and 10 Hz AC field from polar lipids of K. pneumoniae and E. coli were (106 ± 29.7) and (86 ± 24.3) µm in diameter, respectively. All liposomes were unilamellar as indicated by their unilamellar indices of 50 ± 2, had surface charge comparable to vesicles made from lipid(s) with similar composition and exhibited only 1-2 mol% of oxidized lipids. Cu concentration in the liposomal samples was <1.5 ppm for large unilamellar vesicles (LUVs) and ˂5 ppm for giant unilamellar vesicles (GUVs). The vesicles were stable for >15 d without loss of their size, charge, or unilamellarity. The method was successfully applied to prepare phytosomes from egg-PC and a phytochemical fraction of Dimorphocalyx glabellus, a medicinal plant with anti-diuretic properties. Phytosomes formed were 1000-1500 nm in diameter and exhibited altered fluorescence and absorbance properties compared to the unencapsulated phytochemical. Phytosomes with phytochemical: egg-PC ratio from 0.15 to 1.5 had encapsulation efficiency ranging 90-30%, respectively, and was stable for 1 month. Our method is easy, inexpensive and convenient that will prove to be useful for preparation of liposomes and phytosomes.

Biophysical Characterization of Membrane Phase Transition Profiles for the Discrimination of Outer Membrane Vesicles (OMVs) From Escherichia coli Grown at Different Temperatures

Dynamic Light Scattering (DLS), Small Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) are physical techniques widely employed to characterize the morphology and the structure of vesicles such as liposomes or human extracellular vesicles (exosomes). Bacterial extracellular vesicles are similar in size to human exosomes, although their function and membrane properties have not been elucidated in such detail as in the case of exosomes. Here, we applied the above cited techniques, in synergy with the thermotropic characterization of the vesicles lipid membrane using a turbidimetric technique to the study of vesicles produced by Gram-negative bacteria (Outer Membrane Vesicles, OMVs) grown at different temperatures. This study demonstrated that our combined approach is useful to discriminate vesicles of different origin or coming from bacteria cultured under different experimental conditions. We envisage that in a near future the techniques employed in our work will be further implemented to discriminate complex mixtures of bacterial vesicles, thus showing great promises for biomedical or diagnostic applications.

Cultivation at high osmotic pressure confers ubiquinone 8-independent protection of respiration on Escherichia coli

Ubiquinone 8 (coenzyme Q8 or Q8) mediates electron transfer within the aerobic respiratory chain, mitigates oxidative stress, and contributes to gene expression in Escherichia coli In addition, Q8 was proposed to confer bacterial osmotolerance by accumulating during growth at high osmotic pressure and altering membrane stability. The osmolyte trehalose and membrane lipid cardiolipin accumulate in E. coli cells cultivated at high osmotic pressure. Here, Q8 deficiency impaired E. coli growth at low osmotic pressure and rendered growth osmotically sensitive. The Q8 deficiency impeded cellular O₂ uptake and also inhibited the activities of two proton symporters, the osmosensing transporter ProP and the lactose transporter LacY. Q8 supplementation decreased membrane fluidity in liposomes, but did not affect ProP activity in proteoliposomes, which is respiration-independent. Liposomes and proteoliposomes prepared with E. coli lipids were used for these experiments. Similar oxygen uptake rates were observed for bacteria cultivated at low and high osmotic pressures. In contrast, respiration was dramatically inhibited when bacteria grown at the same low osmotic pressure were shifted to high osmotic pressure. Thus, respiration was restored during prolonged growth of E. coli at high osmotic pressure. Of note, bacteria cultivated at low and high osmotic pressures had similar Q8 concentrations. The protection of respiration was neither diminished by cardiolipin deficiency nor conferred by trehalose overproduction during growth at low osmotic pressure, but rather might be achieved by Q8-independent respiratory chain remodeling. We conclude that osmotolerance is conferred through Q8-independent protection of respiration, not by altering physical properties of the membrane.

Assessing Interactions Between a Polytopic Membrane Protein and Lipid Bilayers Using Differential Scanning Calorimetry and Solid-State NMR

It is known that the lipid composition within a cellular membrane can influence membrane protein structure and function. In this Article, we investigated how structural changes to a membrane protein upon substrate binding can impact the lipid bilayer. To carry out this study, we reconstituted the secondary active drug transporter EmrE into a variety of phospholipid bilayers varying in headgroup and chain length and carried out differential scanning calorimetry (DSC) and solid-state NMR experiments. The DSC results revealed a difference in cooperativity of the lipid phase transition for drug-free EmrE protonated at glutamic acid 14 (i.e., proton-loaded form) and the tetraphenylphosphonium (TPP⁺) bound form of the protein (i.e., drug-loaded form). To complement these findings, we acquired magic-angle-spinning (MAS) spectra in the presence and absence of TPP⁺ by directly probing the phospholipid headgroup using ³¹P NMR. These spectra showed a reduction in lipid line widths around the main phase transition for samples where EmrE was bound to TPP⁺ compared to the drug free form. Finally, we collected oriented solid-state NMR spectra on isotopically enriched EmrE that displayed chemical shift perturbations to both transmembrane and loop residues upon TPP⁺ binding. All of these results prompt us to propose a mechanism whereby substrate-induced changes to the structural dynamics of EmrE alters the surrounding lipids within the bilayer.

Bacterial Cell Mechanics

Cellular mechanical properties play an integral role in bacterial survival and adaptation. Historically, the bacterial cell wall and, in particular, the layer of polymeric material called the peptidoglycan were the elements to which cell mechanics could be primarily attributed. Disrupting the biochemical machinery that assembles the peptidoglycan (e.g., using the β-lactam family of antibiotics) alters the structure of this material, leads to mechanical defects, and results in cell lysis. Decades after the discovery of peptidoglycan-synthesizing enzymes, the mechanisms that underlie their positioning and regulation are still not entirely understood. In addition, recent evidence suggests a diverse group of other biochemical elements influence bacterial cell mechanics, may be regulated by new cellular mechanisms, and may be triggered in different environmental contexts to enable cell adaptation and survival. This review summarizes the contributions that different biomolecular components of the cell wall (e.g., lipopolysaccharides, wall and lipoteichoic acids, lipid bilayers, peptidoglycan, and proteins) make to Gram-negative and Gram-positive bacterial cell mechanics. We discuss the contribution of individual proteins and macromolecular complexes in cell mechanics and the tools that make it possible to quantitatively decipher the biochemical machinery that contributes to bacterial cell mechanics. Advances in this area may provide insight into new biology and influence the development of antibacterial chemotherapies.

Tuning the photoexcitation response of cyanobacterial Photosystem I via reconstitution into Proteoliposomes

The role of natural thylakoid membrane housing of Photosystem I (PSI), the transmembrane photosynthetic protein, in its robust photoactivated charge separation with near unity quantum efficiency is not fundamentally understood. To this end, incorporation of suitable protein scaffolds for PSI incorporation is of great scientific and device manufacturing interest. Areas of interest include solid state bioelectronics, and photoelectrochemical devices that require bio-abio interfaces that do not compromise the photoactivity and photostability of PSI. Therefore, the surfactant-induced membrane solubilization of a negatively charged phospholipid (DPhPG) with the motivation of creating biomimetic reconstructs of PSI reconstitution in DPhPG liposomes is studied. Specifically, a simple yet elegant method for incorporation of PSI trimeric complexes into DPhPG bilayer membranes that mimic the natural thylakoid membrane housing of PSI is introduced. The efficacy of this method is demonstrated via absorption and fluorescence spectroscopy measurements as well as direct visualization using atomic force microscopy. This study provides direct evidence that PSI confinements in synthetic lipid scaffolds can be used for tuning the photoexcitation characteristics of PSI. Hence, it paves the way for development of fundamental understanding of microenvironment alterations on photochemical response of light activated membrane proteins.

Physicochemical characterizations of functional hybrid liposomal nanocarriers formed using photo-sensitive lipids

With recent advances in the field of diagnostics and theranostics, liposomal technology has secured a fortified position as a potential nanocarrier. Specifically, radiation/photo-sensitive liposomes containing photo-polymerizable cross-linking lipids are intriguing as they can impart the vesicles with highly interesting properties such as response to stimulus and improved shell stability. In this work, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphoethanolamine (DTPE) is used as a photo-polymerizable lipid to form functional hybrid-liposomes as it can form intermolecular cross-linking through the diacetylenic groups. Hybrid-liposomes were formulated using mixtures of DTPE and saturated lipids of different chain lengths (dipalmitoylphosphatidylcholine (DPPC) and dimirystoilphosphatidylcholine (DMPC)) at different molar ratios. The physico-chemical characteristics of the liposomes has been studied before and after UV irradiation using a combination of techniques: DSC, QCM-D and solid-state NMR. The results signify the importance of a subtle modification in alkyl chain length on the phase behavior of the hybrid-liposomes and on the degree of crosslinking in the shell.

Osmotic Stress

Escherichia coli and Salmonella encounter osmotic pressure variations in natural environments that include host tissues, food, soil, and water. Osmotic stress causes water to flow into or out of cells, changing their structure, physics, and chemistry in ways that perturb cell functions. E. coli and Salmonella limit osmotically induced water fluxes by accumulating and releasing electrolytes and small organic solutes, some denoted compatible solutes because they accumulate to high levels without disturbing cell functions. Osmotic upshifts inhibit membrane-based energy transduction and macromolecule synthesis while activating existing osmoregulatory systems and specifically inducing osmoregulatory genes. The osmoregulatory response depends on the availability of osmoprotectants (exogenous organic compounds that can be taken up to become compatible solutes). Without osmoprotectants, K+ accumulates with counterion glutamate, and compatible solute trehalose is synthesized. Available osmoprotectants are taken up via transporters ProP, ProU, BetT, and BetU. The resulting compatible solute accumulation attenuates the K+ glutamate response and more effectively restores cell hydration and growth. Osmotic downshifts abruptly increase turgor pressure and strain the cytoplasmic membrane. Mechanosensitive channels like MscS and MscL open to allow nonspecific solute efflux and forestall cell lysis. Research frontiers include (i) the osmoadaptive remodeling of cell structure, (ii) the mechanisms by which osmotic stress alters gene expression, (iii) the mechanisms by which transporters and channels detect and respond to osmotic pressure changes, (iv) the coordination of osmoregulatory programs and selection of available osmoprotectants, and (v) the roles played by osmoregulatory mechanisms as E. coli and Salmonella survive or thrive in their natural environments.

Beyond the hydrophobic effect: Critical function of water at biological phase boundaries--A hypothesis

Many life-sustaining processes in living cells occur at the membrane-water interface. The pertinent questions that need to be asked are what is the evolutionary reason for biology to choose the membrane-water interface as the site for performing and/or controlling crucial biological reactions and what is the key physical principle that is singular to the membrane-water interface that biology exploits for regulating metabolic processes in cells? In this review, a hypothesis is developed, which espouses that cells control activities of membrane-bound enzymes and receptor activated processes via manipulating the thermodynamic activity of water at the membrane-water interfacial region. In support of this hypothesis, first we establish that the surface pressure of a lipid monolayer is a direct measure of a reduction in the thermodynamic activity of interfacial water. Second, we show that the surface pressure-dependent activation/inactivation of interfacial enzymes is fundamentally related to their dependence on interfacial water activity. We extend this argument to infer that cells might manipulate activities of membrane-associated biological processes via manipulating the activity of interfacial water via localized compression or expansion of the interface. In this paper, we critically analyze literature data on mechano-activation of large pore ion channels in Escherichia coli spheroplasts and G-proteins in reconstituted lipid vesicles, and show that these pressure-induced activation processes are fundamentally and quantitatively related to changes in the thermodynamic state of interfacial water, caused by mechanical stretching of the bilayer.

Solid-state NMR studies of full-length BamA in lipid bilayers suggest limited overall POTRA mobility

The outer membrane protein BamA is the key player in β-barrel assembly in Gram-negative bacteria. Despite the availability of high-resolution crystal structures, the dynamic behavior of the transmembrane domain and the large periplasmic extension consisting of five POTRA (POlypeptide-TRansport-Associated) domains remains unclear. We demonstrate reconstitution of full-length BamA in proteoliposomes at low lipid-to-protein ratio, leading to high sensitivity and resolution in solid-state NMR (ssNMR) experiments. We detect POTRA domains in ssNMR experiments probing rigid protein segments in our preparations. These results suggest that the periplasmic region of BamA is firmly attached to the β-barrel and does not experience fast global motion around the angle between POTRA 2 and 3. We show that this behavior holds at lower protein concentrations and elevated temperatures. Chemical shift variations observed after reconstitution in lipids with different chain lengths and saturation levels are compatible with conformational plasticity of BamA's transmembrane domain. Electron microscopy of the ssNMR samples shows that BamA can cause local disruptions of the lipid bilayer in proteoliposomes. The observed interplay between protein-protein and protein-lipid interactions may be critical for BamA-mediated insertion of substrates into the outer membrane.

Challenges in the Development of Functional Assays of Membrane Proteins

Lipid bilayers are natural barriers of biological cells and cellular compartments. Membrane proteins integrated in biological membranes enable vital cell functions such as signal transduction and the transport of ions or small molecules. In order to determine the activity of a protein of interest at defined conditions, the membrane protein has to be integrated into artificial lipid bilayers immobilized on a surface. For the fabrication of such biosensors expertise is required in material science, surface and analytical chemistry, molecular biology and biotechnology. Specifically, techniques are needed for structuring surfaces in the micro- and nanometer scale, chemical modification and analysis, lipid bilayer formation, protein expression, purification and solubilization, and most importantly, protein integration into engineered lipid bilayers. Electrochemical and optical methods are suitable to detect membrane activity-related signals. The importance of structural knowledge to understand membrane protein function is obvious. Presently only a few structures of membrane proteins are solved at atomic resolution. Functional assays together with known structures of individual membrane proteins will contribute to a better understanding of vital biological processes occurring at biological membranes. Such assays will be utilized in the discovery of drugs, since membrane proteins are major drug targets.

Impacts of the osmolality and the lumenal ionic strength on osmosensory transporter ProP in proteoliposomes

H(+) symporter ProP serves as a paradigm for the study of osmosensing. ProP attains the same activity at the same osmolality when the medium outside cells or proteoliposomes is supplemented with diverse, membrane-impermeant solutes. The osmosensory mechanism of ProP has been probed by varying the solvent within membrane vesicles and proteoliposomes. ProP activation was not ion specific, did not require K(+), and could be elicited by large, uncharged solutes polyethylene glycols (PEGS). We hypothesized that ProP is an ionic strength sensor and lumenal macromolecules activate ProP by altering ion activities. The attainable range of lumenal ionic strength was expanded by lowering the phosphate concentration within proteoliposomes. ProP activity at high osmolality, but not the osmolality, yielding half-maximal activity (Π(1/2)/RT), decreased with the lumenal phosphate concentration. This was attributed to acidification of the proteoliposome lumen due to H(+)-proline symport. The ionic strength yielding half-maximal ProP activity was more anion-dependent than Π(1/2)/RT for proteoliposomes loaded with citrate, sulfate, phosphate, chloride, or iodide. The anion effects followed the Hofmeister series. Lumenal bovine serum albumin (BSA) lowered the lumenal ionic strength at which ProP became active. Osmolality measurements documented the non-idealities of solutions including potassium phosphate and other solutes. The impacts of PEGS and BSA on ion activities did not account for their impacts on ProP activity. The effects of the tested solutes on ProP appear to be non-coulombic in nature. They may arise from effects of preferential interactions and macromolecular crowding on the membrane or on ProP.

Bacterial osmoregulation: a paradigm for the study of cellular homeostasis

To thrive, cells must control their own physical and chemical properties. This process is known as cellular homeostasis. The dilute solutions traditionally favored by experimenters do not simulate the cytoplasm, where macromolecular crowding and preferential interactions among constituents may dominate critical processes. Solutions that do simulate cytoplasmic conditions are now being characterized. Corresponding cytoplasmic properties can be varied systematically by imposing osmotic stress. This osmotic stress approach is revealing how cytoplasmic properties modulate protein folding and protein?nucleic acid interactions. Results suggest that cytoplasmic homeostasis may require adjustments to multiple, interwoven cytoplasmic properties. Osmosensory transporters with diverse structures and bioenergetic mechanisms activate in response to osmotic stress as other proteins inactivate. These transporters are serving as paradigms for the study of in vivo protein-solvent interactions. Experimenters have proposed three different osmosensory mechanisms. Distinct mechanisms may exist, or these proposals may reflect different perceptions of a single, unifying mechanism.

Cardiolipin, a key component to mimic the E. coli bacterial membrane in model systems revealed by dynamic light scattering and steady-state fluorescence anisotropy

The phase transition temperatures of several lipidic systems were determined using two different techniques: dynamic light scattering (DLS) and steady-state fluorescence anisotropy, using two fluorescent probes that report different membrane regions (TMA-DPH and DPH). Atomic force microscopy (AFM) was used as a complementary technique to characterize different lipid model systems under study. The systems were chosen due to the increased interest in bacterial membrane studies due to the problem of antibiotic drug resistance. The simpler models studied comprised of mixtures of POPE and POPG lipids, which form a commonly used model system for Escherichia coli membranes. Given the important role of cardiolipin (CL) in natural membranes, a ternary model system, POPE/POPG/CL, was then considered. The results obtained in these mimetic systems were compared with those obtained for the natural systems E. coli polar and total lipid extract. DLS and fluorescence anisotropy are not commonly used to study lipid phase transitions, but it was shown that they can give useful information about the thermotropic behaviors of model systems for bacterial membranes. These two techniques provided very similar results, validating their use as methods to measure phase transitions in lipid model systems. The temperature transitions obtained from these two very different techniques and the AFM results clearly show that cardiolipin is a fundamental component to mimic bacteria membranes. The results suggest that the less commonly used ternary system is a considerably better mimic for natural E. coli membranes than binary lipid mixture.

The nanodisc: a novel tool for membrane protein studies

A major challenge in the research on membrane-anchored and integral membrane protein complexes is to obtain these in a functionally active, water-soluble, and monodisperse form. This requires the incorporation of the membrane proteins into a native-like membrane or detergent micelle that mimics the properties of the original biological membrane. However, solubilization in detergents or reconstitution in liposomes or supported monolayers sometimes suffers from loss of activity and problematic analyses due to heterogeneity and aggregation. A developing technology termed nanodiscs exploits discoidal phospholipid bilayers encircled by a stabilizing amphipatic helical membrane scaffold protein to reconstitute membranes with integral proteins. After reconstitution, the membrane nanodisc is soluble, stable, and monodisperse. In the present review, we outline the biological inspiration for nanodiscs as discoidal high-density lipoproteins, the assembly and handling of nanodiscs, and finally their diverse biochemical applications. In our view, major advantages of nanodisc technology for integral membrane proteins is homogeneity, control of oligomerization state, access to both sides of the membrane, and control of lipids in the local membrane environment of the integral protein.

High fluidity and soft elasticity of the inner membrane of Escherichia coli revealed by the surface rheology of model Langmuir monolayers

We have studied the equilibrium and linear mechanical properties of model membranes of Escherichia coli built up as Langmuir monolayers of a native lipid extract using surface thermodynamics, fluorescence microscopy, and surface rheology measurements. The experimental study has been carried out at different temperatures across the physiological operative range 15-37 degrees C. Lipid phase coexistence has been revealed over a broad pressure range by fluorescence microscopy. The presence of ordered domains has been invoked to explain the emergence of shear elasticity accompanying the hydrostatic compression elasticity typical of fluid monolayers. The surface rheology measurements point out the soft character of E. coli membranes; i.e., upon deformation they react as a near-ideal compliant body with minimal energy dissipation, thus optimizing the effectiveness of external stresses in producing membrane deformations. These mechanical features appear to be independent of temperature, suggesting the existence of a passive thermoregulation mechanism.

Changes in Listeria monocytogenes membrane fluidity in response to temperature stress

Listeria monocytogenes is a food-borne pathogen that has been implicated in many outbreaks associated with ready-to-eat products. Listeria adjusts to various stresses by adjusting its membrane fluidity, increasing the uptake of osmoprotectants and cryoprotectants, and activating the sigma(B) stress factor. The present work examines the regulation of membrane fluidity through direct measurement based on fluorescent anisotropy. The membrane fluidities of L. monocytogenes Scott A, NR30, wt10403S, and cld1 cells cultured at 15 and 30 degrees C were measured at 15 and 30 degrees C. The membrane of the cold-sensitive mutant (cld1) was more rigid than the membranes of the other strains when grown at 30 degrees C, but when grown at 15 degrees C, it was able to adjust its membrane to approach the rigidity of the other strains. The difference in rigidities, as determined at 15 and 30 degrees C, was greater in liposomes than in whole cells. The rates of fluidity adjustment and times required for whole cells to adjust to a different temperature were similar among strains but different from those of liposomes. This suggests that the cells had a mechanism for homeoviscous adaptation that was absent in liposomes.

Projection structure of the membrane domain of Escherichia coli respiratory complex I at 8 A resolution

Respiratory complex I (NADH:ubiquinone oxidoreductase) is an L-shaped multisubunit protein assembly consisting of a hydrophobic membrane arm and a hydrophilic peripheral arm. It catalyses the transfer of two electrons from NADH to quinone coupled to the translocation of four protons across the membrane. Although we have solved recently the crystal structure of the peripheral arm, the structure of the complete enzyme and the coupling mechanism are not yet known. The membrane domain of Escherichia coli complex I consists of seven different subunits with total molecular mass of 258 kDa. It is significantly more stable than the whole enzyme, which allowed us to obtain well-ordered two-dimensional crystals of the domain, belonging to the space group p22(1)2(1). Comparison of the projection map of negatively stained crystals with previously published low-resolution structures indicated that the characteristic curved shape of the membrane domain is remarkably well conserved between bacterial and mitochondrial enzymes, helping us to interpret projection maps in the context of the intact complex. Two pronounced stain-excluding densities at the distal end of the membrane domain are likely to represent the two large antiporter-like subunits NuoL and NuoM. Cryo-electron microscopy on frozen-hydrated crystals allowed us to calculate a projection map at 8 A resolution. About 60 transmembrane alpha-helices, both perpendicular to the membrane plane and tilted, are present within one membrane domain, which is consistent with secondary structure predictions. A possible binding site and access channel for quinone are found at the interface with the peripheral arm. Tentative assignment of individual subunits to the features of the map has been made. The location of subunits NuoL and NuoM at substantial distance from the peripheral arm, which contains all the redox centres of the complex, indicates that conformational changes are likely to play a role in the mechanism of coupling between electron transfer and proton pumping.

Interfacial membrane effects of fluoroquinolones as revealed by a combination of fluorescence binding experiments and atomic force microscopy observations

6-Fluoroquinolones are useful antimicrobial agents against gram-positive and gram-negative bacteria and some mycobacterial species as well. Although the diffusion through porins in gram-negative bacteria is well established, other mechanisms such as the hydrophobic pathway through the apolar regions of the bilayer and the self-promoted pathway appear to be relevant or concomitant with the hydrophilic pathway in many cases. This article discusses the interaction of ciprofloxacin (CPX) and two new synthesized compounds (M3CPX and M4CPX)-with a methyl group attached at the N3 and N4 positions of the piperazynil ring of the CPX-with liposomes and supported planar bilayers (SPBs) of Escherichia coli. Binding experiments using ANS revealed that the three compounds interact electrostatically with the bilayer. The variations in the electrostatic surface potential, which is always positive, were higher for M3CPX than for CPX or M4CPX. Related to that, the SPBs of E. coli were more affected by M3CPX than by the other two compounds, as judged by the analysis of the atomic force microcopy (AFM) images. The in situ injection of the three 6-fluoroquinolones (6-FQs) induced different changes in height, roughness (Ra), and area covered by the SPBs.

Supported planar bilayers from hexagonal phases

In this work the presence of inverted hexagonal phases H(II) of 1-palmitoy-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and cardiolipin (CL) (0.8:0.2, mol/mol) in the presence of Ca(2+) were observed via (31)P-NMR spectroscopy. When suspensions of the same composition were extended onto mica, H(II) phases transformed into structures which features are those of supported planar bilayers (SPBs). When characterized by atomic force microscopy (AFM), the SPBs revealed the existence of two laterally segregated domains (the interdomain height being approximately 1 nm). Cytochrome c (cyt c), which binds preferentially to acidic phospholipids like CL, was used to demonstrate the nature of the domains. We used 1-anilinonaphtalen-8-sulfonate (ANS) to demonstrate that in the presence of cyt c, the fluorescence of ANS decreased significantly in lamellar phases. Conversely, the ANS binding to H(II) phases was negligible. When cyt c was injected into AFM fluid imaging cells, where SPBs of POPE:CL had previously formed poorly defined structures, protein aggregates ( approximately 100 nm diameter) were ostensibly observed only on the upper domains, which suggests not only that they are mainly formed by CL, but also provides evidence of bilayer formation from H(II) phases. Furthermore, a model for the nanostructure of the SPBs is herein proposed.

Influence of membrane composition on osmosensing by the betaine carrier BetP from Corynebacterium glutamicum

The glycine betaine carrier BetP from Corynebacterium glutamicum was recently shown to function as both an osmosensor and osmoregulator in proteoliposomes made from Escherichia coli phospholipids by sensing changes in the internal K+ concentration as a measure of hyperosmotic stress (Rübenhagen, R., Morbach, S., and Krämer, R. (2001) EMBO J. 20, 5412-5420). Furthermore, evidence was provided that a stretch of 25 amino acids of the C-terminal domain of BetP is critically involved in K+ sensing. This K+-sensitive region has been further characterized. Glu572 turned out to be important for osmosensing in E. coli cells and in proteoliposomes made from E. coli phospholipids. BetP mutants E572K, E572P, and E572A/H573A/R574A were unable to detect an increase in the internal K+ concentration in this membrane environment. However, these BetP variants regained their ability to detect osmotic stress in membranes with increased phosphatidylglycerol content, i.e. in intact C. glutamicum cells or in proteoliposomes mimicking the composition of the C. glutamicum membrane. Mutants E572P and Y550P were still insensitive to osmotic stress also in this membrane background. These results led to the following conclusions. (i) The K+ sensor in mutants E572Q, E572D, and E572K is only partially impaired. (ii) Restoration of activity regulation is not possible if the correct conformation or orientation of the C-terminal domain is compromised by a proline residue at position 572 or 550. (iii) Phosphatidylglycerol in the membrane of C. glutamicum seems to stabilize the inactive conformation of BetP C252T and other mutants.

Determination of liposome size: A tool for protein reconstitution

Reconstitution of proteins into liposomes is a widespread approach to analyzing their biological function. Many protocols exist for this procedure and for the subsequent analysis of proteins. Here, we establish a procedure for preparation and analysis of liposomes with a lipid composition reflecting the outer envelope of chloroplasts. First, the stability of the liposomes in different buffer systems was investigated to provide information for the storage of the reconstituted system. Then, the size of the liposomes created by filtration through a polycarbonate filter dependent on the lipid composition was analyzed. Subsequently, solubilization of the liposomes composed of lipids with the outer envelope composition by dodecylmaltoside and octylglucoside as a preceding step of reconstitution was studied. Finally, we developed a straightforward method to determine the size of liposomes by absorption spectroscopy. The described setup allows the construction of reconstitution protocols, including the final determination of the liposome size.

Kinetic and thermodynamic analysis of Bradyrhizobium japonicum PutA-membrane associations

In Escherichia coli, proline induces tight membrane binding of the PutA flavoenzyme and transforms PutA from a transcriptional repressor to a membrane-associated proline catabolic enzyme. In other gram-negative bacteria such as Bradyrhizobium japonicum, PutA lacks DNA binding activity and functions only as a proline catabolic enzyme. Here, we characterize the membrane binding properties of PutA from B. japonicum (BjPutA) to address whether proline regulates BjPutA-lipid binding similar to Escherichia coli PutA (EcPutA). Surface plasmon resonance (SPR) kinetic measurements of BjPutA-lipid binding show BjPutA forms a complex with lipids in the absence and presence of proline with similar dissociation constant (K(D)) values of 2.5 and 1.7nM, respectively. SPR experiments using differently charged lipid bilayers indicate BjPutA selectively binds negatively charged lipids, which contrasts with the charge independent membrane binding of EcPutA. Analysis of BjPutA-lipid binding by isothermal titration calorimetry at 25 degrees C revealed an endothermic binding reaction that is entropically driven. This work shows that BjPutA-membrane associations vary significantly from EcPutA.

The evolutionarily related beta-barrel polypeptide transporters from Pisum sativum and Nostoc PCC7120 contain two distinct functional domains

Several beta-barrel-type channels are involved in the translocation or assembly of outer membrane proteins of bacteria or endosymbiotically derived organelles. Here we analyzed the functional units of the beta-barrel polypeptide transporter Toc75 (translocon in outer envelope of chloroplasts) of the outer envelope of chloroplasts and of a protein, alr2269, from Nostoc PCC7120 with homology to Toc75, both proteins having a similar domain organization. We demonstrated that the N-terminal region functions as a recognition and complex assembly unit, whereas the C terminus forms the beta-barrel-type pore. The pore region is, in turn, modulated by the N terminus of the proteins. The protein from Nostoc PCC7120, which shares a common ancestor with Toc75, is able to recognize precursor proteins destined for chloroplasts. In contrast, the recognition of peripheral translocon subunits by Toc75 is a novel feature acquired through evolution.

Osmotically induced shape changes of large unilamellar vesicles measured by dynamic light scattering

Static and dynamic light scattering measurements have been used to characterize the size, size distribution, and shape of extruded vesicles under isotonic conditions. Dynamic light scattering was then used to characterize osmotically induced shape changes by monitoring changes in the hydrodynamic radius (R(h)) of large unilamellar vesicles (LUVs). These changes are compared to those predicted for several shapes that appear in trajectories through the phase diagram of the area difference elasticity (ADE) model (. Phys. Rev. E. 52:6623-6634). Measurements were performed on dioleoylphosphatidylcholine (DOPC) vesicles using two membrane-impermeant osmolytes (NaCl and sucrose) and a membrane-permeant osmolyte (urea). For all conditions, we were able to produce low-polydispersity, nearly spherical vesicles, which are essential for resolving well-defined volume changes and consequent shape changes. Hyper-osmotic dilutions of DOPC vesicles in urea produced no change in R(h), whereas similar dilutions in NaCl or sucrose caused reductions in vesicle volume resulting in observable changes to R(h). Under conditions similar to those of this study, the ADE model predicts an evolution from spherical to prolate then oblate shapes on increasing volume reduction of LUVs. However, we found that DOPC vesicles became oblate at all applied volume reductions.

The osmoreactive betaine carrier BetP from Corynebacterium glutamicum is a sensor for cytoplasmic K+

The isolated glycine betaine uptake carrier BetP from Corynebacterium glutamicum was reconstituted in Escherichia coli phospholipid liposomes and its response to osmotic stress studied. The transport activity of BetP, which was previously shown to comprise both osmosensory and osmoregulatory functions, was used to identify the nature of the physicochemical stimulus related to hyperosmotic stress. Putative factors modulating transport activity in response to osmotic stress were dissected. These include type, osmolality and concentration of solutes in the internal and/or external compartment (cationic, anionic, zwitterionic, neutral), as well as membrane strain as a response to increased osmolality. Osmoresponsive activation of BetP was independent of any external factor and of physical alterations of the membrane, but was triggered by a change in the internal K+ concentration. Activation did not depend on the type of anion present and was K+ (or Cs+ and Rb+) specific, as choline and NH(4)+ did not trigger BetP activity. The half-maximal activation of BetP in E.coli phospholipid liposomes was correlated to an internal concentration of 221 +/- 23 mM K+.

Determination of the partition coefficients of a homologous series of ciprofloxacin: influence of the N-4 piperazinyl alkylation on the antimicrobial activity

Partitioning of a fluoroquinolone antibiotic, ciprofloxacin, and its N-piperazinyl alkyl derivatives, between octanol or Escherichia coli lipid membrane extract and aqueous buffer pH 7.4, was studied. The experimental partition coefficients (Pexp) were corrected at this pH using an expression that includes the microconstant values of each compound. The relationship between the corrected partition coefficients expressed as logP (thermodynamic partition coefficient) and the diffusion through the lipid bilayers ('hydrophobic pathway') of entry has been considered here. In this work, we have explored the possibility of using our model to provide physicochemical evidences to support such a via. The correlation between logP values and antibacterial activities (expressed as minimal inhibitory concentration (MIC) values) of the homologous series of antibiotics against different bacteria were studied. A parabolic behaviour was observed which evidenced that the only increase in lipophilicity does not result in an enhanced antimicrobial activity for the homologous family studied.