Cholesterol monohydrate nucleation in ultrathin films on water

Interactions of Brominated Flame Retardants with Membrane Models of Dehalogenating Bacteria: Langmuir Monolayer and Grazing Incidence X-ray Diffraction Studies

Brominated flame retardants (BFRs) are small organic molecules containing several bromine substituents added to plastics to limit their flammability. BFRs can constitute up to 30% of the weight of some plastics, which is why they are produced in large quantities. Along with plastic waste and microplastic particles, BFRs end up in the soil and can easily leach causing contamination. As polyhalogenated molecules, multiple BFRs were classified as persistent organic pollutants (POPs), meaning that their biodegradation in the soils is especially challenging. However, some anaerobic bacteria as Dehaloccocoides can dehalogenate BFRs, which is important in the bioremediation of contaminated soils. BFRs are hydrophobic, can accumulate in plasma membranes, and disturb their function. On the other hand, limited membrane accumulation is necessary for BFR dehalogenation. To study the BFR-membrane interaction, we created membrane models of soil dehalogenating bacteria and tested their interactions with seven legacy and novel BFRs most common in soils. Phospholipid Langmuir monolayers with appropriate composition were used as membrane models. These membranes were doped in the selected BFRs, and the incorporation of BFR molecules into the phospholipid matrix and also the effects of BFR presence on membrane physical properties and morphology were studied. It turned out that the seven BFRs differed significantly in their membrane affinity. For some, the incorporation was very limited, and others incorporated effectively and could affect membrane properties, while one of the tested molecules induced the formation of bilayer domains in the membranes. Thus, Langmuir monolayers can be effectively used for pretesting BFR membrane activity.

Statin Action Targets Lipid Rafts of Cell Membranes: GIXD/PM-IRRAS Investigation of Langmuir Monolayers

Lipid rafts are condensed regions of cell membranes rich in cholesterol and sphingomyelin, which constitute the target for anticholesterolemic drugs - statins. In this work, we use for the first time a combined grazing-incidence X-ray diffraction (GIXD)/polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS)/Brewster angle microscopy (BAM) approach to show the statin effect on model lipid rafts and its components assembled in Langmuir monolayers at the air-water interface. Two representatives of these drugs, fluvastatin (FLU) and cerivastatin (CER), of different hydrophobicity were chosen, while cholesterol (Chol) and sphingomyelin (SM), and their 1:1 mixture were selected to form condensed monolayers of lipid rafts. The effect of statins on the single components of lipid rafts indicated that both the hydrophobicity of the drugs and the organization of the layer determined the drug-lipid interaction. For cholesterol monolayers, only the most hydrophobic CER was effectively changing the film structure, while for the less organized sphingomyelin, the biggest effect was observed for FLU. This drug affected both the polar headgroup region as shown by PM-IRRAS results and the 2D crystalline structure of the SM monolayer as evidenced by GIXD. Measurements performed for Chol/SM 1:1 models proved also that the statin effect depends on the presence of Chol-SM complexes. In this case, the less hydrophobic FLU was not able to penetrate the binary layer at all, while exposure to the hydrophobic CER resulted in the phase separation and formation of ordered assemblies. The changes in the membrane properties were visualized by BAM images and GIXD patterns and confirmed by thermodynamic parameters of hysteresis in the Langmuir monolayer compression-decompression experiments.

Revealing cholesterol effects on PEGylated HSPC liposomes using AF4-MALS and simultaneous small- and wide-angle X-ray scattering

Liposome development is of great interest owing to increasing requirements for efficient drug carriers. The structural features and thermal stability of such liposomes are crucial in drug transport and delivery. Reported here are the results of the structural characterization of PEGylated liposomes via small- and wide-angle X-ray scattering and an asymmetric flow field-flow fractionation (AF4) system coupled with differential refractive-index detection, multi-angle light scattering (MALS) and dynamic light scattering. This integrated analysis of the exemplar PEGylated liposome formed from hydrogenated soy phosphatid-yl-choline (HSPC) with the addition of cholesterol reveals an average hydro-dynamic radius (R h) of 52 nm with 10% polydispersity, a comparable radius of gyration (R g) and a major liposome particle mass of 118 kDa. The local bilayer structure of the liposome is found to have asymmetric electronic density profiles in the inner and outer leaflets, sandwiched by two PEGylated outer layers ca 5 nm thick. Cholesterol was found to effectively intervene in lipid chain packing, resulting in the thickening of the liposome bilayer, an increase in the area per lipid and an increase in liposome size, especially in the fluid phase of the liposome. These cholesterol effects show signs of saturation at cholesterol concentrations above ca 1:5 cholesterol:lipid molar ratio.

Towards understanding the binding affinity of lipid drug carriers to serum albumin

In the past several years there has been a rapid rise in the use of lipid-based drug formulations. In the case of intravenous drug administration the interaction of lipid carrier with serum albumin is crucial for the distribution of the bioactive molecules in the bloodstream and reaching the target tissue. In this work, we have explored the interaction of serum albumin with three-component lipid monolayer build of palmitoyloleoylphosphatidylcholine (POPC), sphingomyelin (SM), and cholesterol (Chol). Using wide range of lipid compositions and various concentrations of serum albumin we identified the factors governing the lipid-protein binding. Our study revealed that albumin can penetrate selectively the monolayers of POPC/SM/Chol depending on the lipid composition in the mixture. Moreover, the interaction of albumin with monolayer can be controlled by the molecular density of the film and the concentration of protein. The adsorbed albumin exists in the film on the top of lipid monolayer. This behavior may lead to the increase of the size and charge of the lipid carrier and affect the drug transport throughout the bloodstream. The results of this work provide essential physicochemical data that can be used for predicting the pharmacokinetic profile of lipid-based formulations.

The role of structural order in heterogeneous ice nucleation

The freezing of water into ice is a key process that is still not fully understood. It generally requires an impurity of some description to initiate the heterogeneous nucleation of the ice crystals. The molecular structure, as well as the extent of structural order within the impurity in question, both play an essential role in determining its effectiveness. However, disentangling these two contributions is a challenge for both experiments and simulations. In this work, we have systematically investigated the ice-nucleating ability of the very same compound, cholesterol, from the crystalline (and thus ordered) form to disordered self-assembled monolayers. Leveraging a combination of experiments and simulations, we identify a “sweet spot” in terms of the surface coverage of the monolayers, whereby cholesterol maximises its ability to nucleate ice (which remains inferior to that of crystalline cholesterol) by enhancing the structural order of the interfacial water molecules. These findings have practical implications for the rational design of synthetic ice-nucleating agents.

The freezing of water into ice is still not fully understood. Here, we investigate the role of structural disorder within the biologically relevant impurities that facilitate this fundamental phase transition.

Polymorphism, Structure, and Nucleation of Cholesterol·H2O at Aqueous Interfaces and in Pathological Media: Revisited from a Computational Perspective

We revisit the important issues of polymorphism, structure, and nucleation of cholesterol·H₂O using first-principles calculations based on dispersion-augmented density functional theory. For the lesser known monoclinic polymorph, we obtain a fully extended H-bonded network in a structure akin to that of hexagonal ice. We show that the energy of the monoclinic and triclinic polymorphs is similar, strongly suggesting that kinetic and environmental effects play a significant role in determining polymorph nucleation. Furthermore, we find evidence in support of various O–H···O bonding motifs in both polymorphs that may result in hydroxyl disorder. We have been able to explain, via computation, why a single cholesterol bilayer in hydrated membranes always crystallizes in the monoclinic polymorph. We rationalize what we believe is a single-crystal to single-crystal transformation of the monoclinic form on increased interlayer growth beyond that of a single cholesterol bilayer, interleaved by a water bilayer. We show that the ice-like structure is also relevant to the related cholestanol·2H₂O and stigmasterol·H₂O crystals. The structure of stigmasterol hydrate both as a trilayer film at the air–water interface and as a macroscopic crystal further assists us in understanding the polymorphic and thermal behavior of cholesterol·H₂O. Finally, we posit a possible role for one of the sterol esters in the crystallization of cholesterol·H₂O in pathological environments, based on a composite of a crystalline bilayer of cholesteryl palmitate bound epitaxially as a nucleating agent to the monoclinic cholesterol·H₂O form.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Microfluidic Formulation of DNA-Loaded Multicomponent Lipid Nanoparticles for Gene Delivery

In recent years, lipid nanoparticles (LNPs) have gained considerable attention in numerous research fields ranging from gene therapy to cancer immunotherapy and DNA vaccination. While some RNA-encapsulating LNP formulations passed clinical trials, DNA-loaded LNPs have been only marginally explored so far. To fulfil this gap, herein we investigated the effect of several factors influencing the microfluidic formulation and transfection behavior of DNA-loaded LNPs such as PEGylation, total flow rate (TFR), concentration and particle density at the cell surface. We show that PEGylation and post-synthesis sample concentration facilitated formulation of homogeneous and small size LNPs with high transfection efficiency and minor, if any, cytotoxicity on human Embryonic Kidney293 (HEK-293), spontaneously immortalized human keratinocytes (HaCaT), immortalized keratinocytes (N/TERT) generated from the transduction of human primary keratinocytes, and epidermoid cervical cancer (CaSki) cell lines. On the other side, increasing TFR had a detrimental effect both on the physicochemical properties and transfection properties of LNPs. Lastly, the effect of particle concentration at the cell surface on the transfection efficiency (TE) and cell viability was largely dependent on the cell line, suggesting that its case-by-case optimization would be necessary. Overall, we demonstrate that fine tuning formulation and microfluidic parameters is a vital step for the generation of highly efficient DNA-loaded LNPs.

Apolipoprotein E Binding Drives Structural and Compositional Rearrangement of mRNA-Containing Lipid Nanoparticles

Emerging therapeutic treatments based on the production of proteins by delivering mRNA have become increasingly important in recent times. While lipid nanoparticles (LNPs) are approved vehicles for small interfering RNA delivery, there are still challenges to use this formulation for mRNA delivery. LNPs are typically a mixture of a cationic lipid, distearoylphosphatidylcholine (DSPC), cholesterol, and a PEG-lipid. The structural characterization of mRNA-containing LNPs (mRNA-LNPs) is crucial for a full understanding of the way in which they function, but this information alone is not enough to predict their fate upon entering the bloodstream. The biodistribution and cellular uptake of LNPs are affected by their surface composition as well as by the extracellular proteins present at the site of LNP administration, e.g., apolipoproteinE (ApoE). ApoE, being responsible for fat transport in the body, plays a key role in the LNP's plasma circulation time. In this work, we use small-angle neutron scattering, together with selective lipid, cholesterol, and solvent deuteration, to elucidate the structure of the LNP and the distribution of the lipid components in the absence and the presence of ApoE. While DSPC and cholesterol are found to be enriched at the surface of the LNPs in buffer, binding of ApoE induces a redistribution of the lipids at the shell and the core, which also impacts the LNP internal structure, causing release of mRNA. The rearrangement of LNP components upon ApoE incubation is discussed in terms of potential relevance to LNP endosomal escape.

Unusual Behavior of the Bipolar Molecule 25-Hydroxycholesterol at the Air/Water Interface-Langmuir Monolayer Approach Complemented with Theoretical Calculations

In this study, 25-hydroxycholesterol (25-OH), a biamphiphilic compound with a wide range of biological activities, has been investigated at the air/water interface. We were interested in how two hydroxyl groups attached at distal positions of the 25-OH molecule (namely, at C(3) in the sterane system and at C(25) in the side chain) influence its surface behavior. Apart from traditional Langmuir monolayers, other complementary surface-sensitive techniques, such as electric surface potential measurements, Brewster angle microscopy (BAM, enabling texture visualization and film thickness measurements), and polarization modulation-infrared reflection-absorption spectroscopy (PM-IRRAS), were applied. Experimental data have been interpreted with the aid of theoretical study. Our results show that 25-OH molecules in the monomolecular layer are anchored to the water surface alternatively with C(3) or C(25) hydroxyl groups. Theoretical calculations revealed that the populations of these alternative orientations were not equal and molecules anchored with C(3) hydroxyl groups were found to be in excess. As a consequence of such an arrangement, surface films of 25-OH are of lower stability as compared to cholesterol (considered as a non-oxidized analogue of 25-OH). Moreover, it was found that, upon compression, the transition from mono- to bilayer occurred. The molecular mechanism and interactions stabilizing bilayer structure were proposed. The explanation of the observed unusual surface behavior of 25-OH may contribute to an understanding of differences in biological activity between chain- and ring-oxidized sterols.

The role of phospholipid composition and ergosterol presence in the adaptation of fungal membranes to harsh environmental conditions-membrane modeling study

Soil fungi play an important role in the environment decomposing dead organic matter and degrading persistent organic pollutants (POP). The presence of hydrophobic POP in the soil and membrane-lytic substances excreted by competing microorganism to the soil solution is the constant threat to these organisms. To survive in the harsh environment and counteract these hazards the fungal cells have to strictly control the composition of the lipids in their cellular membranes. However, in the case of fungal membranes the correlation between their composition and physical properties is not fully understood. In our studies we applied Langmuir monolayers formed by phospholipids typical to fungal membranes and ergosterol as versatile model membranes. These membranes were characterized by the Langmuir technique, Brewster Angle Microscopy and Grazing Incidence X-ray Diffraction, as well as were exposed to the action of phospholipase A2 treated as a model membrane-lytic protein. We started our studies from the equimolar mixture of phosphatidylethanolamine with phosphatidylcholine and doped this matrix with phosphatidylserine (PS) or phosphatidylinositol (PI). It turned out that the membranes with PS were much more condensed at the mesoscale and periodically organized at the molecular level. Starting from these models we derived two families of model fungal membranes adding to these phospholipid matrices ergosterol. It turned out that the level of ergosterol content is of crucial importance for the model membrane structure and its durability. Changing the ergosterol mole ratio from 0 to 0.5 we defined and described in detail four different 2D crystalline phases.

Relationship between structure and molecular interactions in monolayers of specially designed aminolipids

Artificial cationic lipids are already recognized as highly efficient gene therapy tools. Here, we focus on another potential use of aminolipids, in their electrically-uncharged state, for the formation of covalently cross-linked, one-molecule-thin films at interfaces. Such films are envisioned for future (bio-)materials applications. To this end, Langmuir monolayers of structurally different aminolipids are comprehensively characterized with the help of highly sensitive surface characterization techniques. Pressure-area isotherms, Brewster angle microscopy, grazing-incidence X-ray diffraction and infrared reflection-absorption spectrometry experiments provide a detailed, comparative molecular picture of the formed monolayers. This physico-chemical study highlights the relationship between chemical structures and intermolecular interactions, which can serve as a basis for the rational design of cross-linked thin films with precisely controlled properties.

Hopanoids Like Sterols Form Compact but Fluid Films

Hopanoids are pentacyclic molecules present in membranes from some bacteria, recently proposed as sterol surrogates in these organisms. Diplopterol is an abundant hopanoid that, similar to sterols, does not self-aggregate in lamellar structures when pure, but forms monolayers at the air-water interface. Here, we analyze the interfacial behavior of pure diplopterol and compare it with sterols from different organisms: cholesterol from mammals, ergosterol from fungi, and stigmasterol from plants. We prepared Langmuir monolayers of the compounds and studied their surface properties using different experimental approaches and molecular dynamics simulations. Our results indicate that the films formed by diplopterol, despite being compact with low mean molecular areas, high surface potentials, and high refractive index, depict shear viscosity values similar to that for fluid films. Altogether, our results reveal that hopanoids have similar interfacial behavior than that of sterols, and thus they may have the capacity of modulating bacterial membrane properties in a similar way sterols do in eukaryotes.

Headgroup-Ordered Monolayers of Uncharged Glycolipids Exhibit Selective Interactions with Ions

Selective interactions of ions with charge-neutral saccharides can have far-reaching consequences in biological and wet-technological contexts but have so far been observed only indirectly. Here, we directly quantify by total-reflection X-ray fluorescence the preferential accumulation of ions near uncharged saccharide surfaces in the form of glycolipid Langmuir monolayers at air/water interfaces exhibiting different levels of structural ordering. Selective interactions with ions from the aqueous subphase are observed for monolayers featuring crystalline ordering of the saccharide headgroups, as determined by grazing-incidence X-ray diffraction. The attracted ion species depend on the structural motifs displayed by the ordered saccharide layer. Our results may constitute a basis to understand the salt-specific swelling of wood materials and various phenomena in membrane biophysics.

The influence of terpinen-4-ol and eucalyptol - The essential oil components - on fungi and plant sterol monolayers

Antifungal and herbicidal activity of terpenes, being the components of the essential oils, is directly related to the incorporation of these compounds into cellular membranes. Thus, the differences in the lipid composition of various pathogenic membranes may be the factor determining the activity of these molecules. One of the class of lipids, which form the membrane environment are sterols. The aim of this work was to compare the effect of two terpenes: terpinen-4-ol and eucalyptol on the monolayers formed by ergosterol and β - sitosterol, which are the components of fungi and plant membranes, respectively. The modifications in the sterol monolayer properties were investigated in the surface pressure-area measurements and penetration studies as well as in a micrometer scale (Brewster angle microscopy experiments) and in nanoscale (GIXD technique). It was evidenced that although at higher surface pressure the terpene molecules are in part removed from the interface, they are able to substantially modify the condensation, morphology and molecular organization of the sterol film. It was also found that the incorporation of terpenes into sterol films is comparable for both sterols, however, β - sitosterol monolayers properties are affected more strongly than ergosterol films. Finally, the analysis of the results of the studies performed on model membrane systems and the results of antimicrobial studies reported in literature, enabled us to suggest that the activity of terpenes depends on the membrane composition and that the sterol concentration may be important from the point of view of antifungal effect of terpinen-4-ol and eucalyptol.

Unravelling the origins of ice nucleation on organic crystals

Organic molecules such as steroids or amino acids form crystals that can facilitate the formation of ice - arguably the most important phase transition on earth. However, the origin of the ice nucleating ability of organic crystals is still largely unknown. Here, we combine experiments and simulations to unravel the microscopic details of ice formation on cholesterol, a prototypical organic crystal widely used in cryopreservation. We find that cholesterol - which is also a substantial component of cell membranes - is an ice nucleating agent more potent than many inorganic substrates, including the mineral feldspar (one of the most active ice nucleating materials in the atmosphere). Scanning electron microscopy measurements reveal a variety of morphological features on the surfaces of cholesterol crystals: this suggests that the topography of the surface is key to the broad range of ice nucleating activity observed (from -4 to -20 °C). In addition, we show via molecular simulations that cholesterol crystals aid the formation of ice nuclei in a unconventional fashion. Rather than providing a template for a flat ice-like contact layer (as found in the case of many inorganic substrates), the flexibility of the cholesterol surface and its low density of hydrophilic functional groups leads to the formation of molecular cages involving both water molecules and terminal hydroxyl groups of the cholesterol surface. These cages are made of 6- and, surprisingly, 5-membered hydrogen bonded rings of water and hydroxyl groups that favour the nucleation of hexagonal as well as cubic ice (a rare occurrence). We argue that the phenomenal ice nucleating activity of steroids such as cholesterol (and potentially of many other organic crystals) is due to (i) the ability of flexible hydrophilic surfaces to form unconventional ice-templating structures and (ii) the different nucleation sites offered by the diverse topography of the crystalline surfaces. These findings clarify how exactly organic crystals promote the formation of ice, thus paving the way toward deeper understanding of ice formation in soft and biological matter - with obvious reverberations on atmospheric science and cryobiology.

Mechanical and Crystallographic Analysis of Cholesterol Crystals Puncturing Biological Membranes

Ischemic heart disease often leads to myocardial infarction and remains the most common cause for death in humans. Although the exact impetus for the infarction remains elusive, a mechanism has been proposed that relates the disease to the observed high cholesterol levels in the body. The mechanism claims that cholesterol crystallizes inside the arterial plaque into needle-shaped crystals. The crystals puncture the fibrous cap of the plaque, whereby the necrotic contents of the plaque are spilled, subsequently clotting the blood vessels. This hypothesis has not been given sufficient attention partly due to the purported softness of the organic crystals and the common platy habit of the known crystal forms of cholesterol. In this work it is shown that, from hydrophobic solutions that attempt to emulate the plaque contents, a new solid form of cholesterol crystallizes as prisms with mucronate tips, and they are sufficiently strong to puncture a lamb pericardium, which mimics the plaque cap. The properties of the crystals were assessed by mechanical, structural, and crystallographic analyses. The results support the hypothesis that the cholesterol crystals can be considered, at least within the framework of the proposed mechanism, a possible cause of myocardial infarction.

Two polymorphic cholesterol monohydrate crystal structures form in macrophage culture models of atherosclerosis

The formation of atherosclerotic plaques in the blood vessel walls is the result of LDL particle uptake, and consequently of cholesterol accumulation in macrophage cells. Excess cholesterol accumulation eventually results in cholesterol crystal deposition, the hallmark of mature atheromas. We followed the formation of cholesterol crystals in J774A.1 macrophage cells with time, during accumulation of LDL particles, using a previously developed correlative cryosoft X-ray tomography (cryo-SXT) and stochastic optical reconstruction microscopy (STORM) technique. We show, in the initial accumulation stages, formation of small quadrilateral crystal plates associated with the cell plasma membrane, which may subsequently assemble into large aggregates. These plates match crystals of the commonly observed cholesterol monohydrate triclinic structure. Large rod-like cholesterol crystals form at a later stage in intracellular locations. Using cryotransmission electron microscopy (cryo-TEM) and cryoelectron diffraction (cryo-ED), we show that the structure of the large elongated rods corresponds to that of monoclinic cholesterol monohydrate, a recently determined polymorph of the triclinic crystal structure. These monoclinic crystals form with an unusual hollow cylinder or helical architecture, which is preserved in the mature rod-like crystals. The rod-like morphology is akin to that observed in crystals isolated from atheromas. We suggest that the crystals in the atherosclerotic plaques preserve in their morphology the memory of the structure in which they were formed. The identification of the polymorph structure, besides explaining the different crystal morphologies, may serve to elucidate mechanisms of cholesterol segregation and precipitation in atherosclerotic plaques.

Phytohormone Behavior in the Model Environment of Plant and Human Lipid Membranes

Interactions between three auxins (indole-3-acetic acid (IAA), 2-naphthoxyacetic acid (BNOA), and 2,4-dichlorophenoxyacetic acid (2,4-D)) and model two-dimensional lipid systems mimicking plant and human cell membranes were investigated in monolayers formed at the air/water solution interface. The analysis was based on the recorded π-A isotherm characteristics complemented with Brewster angle microscopy. The influence of auxins on model membranes was discussed on the basis of condensation changes, modification of mutual lipid-lipid interactions in the mixed films, and morphological alteration of the surface domains on the microscopic scale. It was demonstrated that the lipid composition and mutual proportion of the artificial membranes together with sterol to main the phospholipid ratio play a crucial role in the context of auxin behavior in the membrane-mimicking environment. Apart from specific molecular interactions between studied phytohormones represented by auxins and lipids, the condensation of the investigated monolayers was found to be a regulative factor of model systems' susceptibility toward auxin action. Two effects were recognized: fluidizing of monolayers being in the liquid state (model membranes) and initialization of the three-dimensional structure formation in ordered sterol films at high surface pressure. The influence of auxin molecules on lipid interactions in the monolayer and diminishing of the film condensation was the largest for BNOA, due to the presence of the most bulky nonpolar, aromatic fragment in the molecule. It was also demonstrated that auxins interact with model plant membranes more selectively, stronger, and at markedly lower concentration than with the human membrane models.

Membrane Cholesterol Modulates Superwarfarin Toxicity

Superwarfarins are modified analogs of warfarin with additional lipophilic aromatic rings, up to 100-fold greater potency, and longer biological half-lives. We hypothesized that increased hydrophobicity allowed interactions with amphiphilic membranes and modulation of biological responses. We find that superwarfarins brodifacoum and difenacoum increase lactate production and cell death in neuroblastoma cells. In contrast, neither causes changes in glioma cells that have higher cholesterol content. After choleterol depletion, lactate production was increased and cell viability was reduced. Drug-membrane interactions were examined by surface X-ray scattering using Langmuir monolayers of dipalmitoylphosphatidylcholine and/or cholesterol. Specular X-ray reflectivity data revealed that superwarfarins, but not warfarin, intercalate between dipalmitoylphosphatidylcholine molecules, whereas grazing incidence X-ray diffraction demonstrated changes in lateral crystalline order of the film. Neither agent showed significant interactions with monolayers containing >20% cholesterol. These findings demonstrate an affinity of superwarfarins to biomembranes and suggest that cellular responses to these agents are regulated by cholesterol content.

Reduced Condensing and Ordering Effects by 7-Ketocholesterol and 5β,6β-Epoxycholesterol on DPPC Monolayers

The exposure of organic-coated marine aerosols containing cholesterol (Chol) to radiation and/or an oxidizing atmosphere results in the formation of oxidized derivatives or oxysterols and will likely change aerosol surface properties. However, the intermolecular interactions between oxysterols and other lipid components and their influence on the surface properties of marine aerosols are not well-known. To address this question, the interfacial behavior and domain morphology of model Langmuir monolayers of two ring-substituted oxysterols, 7-ketocholesterol (7-KChol) and 5β,6β-epoxycholesterol (5,6β-EChol), mixed with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were investigated by means of compression isotherms and Brewster angle microscopy (BAM) over a broad range of surface pressures and sterol molar ratios. Mixed DPPC/cholesterol (Chol) monolayers were also measured for comparison. The results of compression experiments showed that the condensing effect induced on mixed DPPC/sterol monolayers at low surface pressures and for intermediate molar ratios (0.3 ≤ X(sterol) ≤ 0.7) was weaker for oxysterols than for Chol. Additionally, mixed DPPC/oxysterol monolayers exhibited markedly smaller (∼2-3-fold) interfacial rigidity. Examination of the excess free energy of mixing further revealed that DPPC monolayers containing 7-KChol and Chol were thermodynamically more stable at high surface pressures than those with 5,6β-EChol, indicating that the strength of interactions between DPPC and 5,6β-EChol was the smallest. Finally, BAM images in the LE-LC phase of DPPC revealed that in comparison to Chol the addition of small amounts of oxysterols results in larger and less numerous domains, showing that oxysterols are not as effective in fluidizing the condensed phase of DPPC. Taken together, these results suggest that the strength of van der Waals interactions of DPPC alkyl chains with sterols follows the sterol hydrophobicity, with Chol being the most hydrophobic and oxysterols more hydrophilic due to their ketone and epoxy moieties. The difference in the condensing ability and stability of 7-KChol and 5,6β-EChol on DPPC likely originates from the distinct molecular structure and position of oxidation on the steroid nucleus. As suggested by recent MD simulations, depending on the oxidation position, ring-substituted oxysterols have a broader angular distribution of orientation than Chol in bilayers, which could be responsible for the observed reduction in condensing ability.

Crucial Role of the Double Bond Isomerism in the Steroid B-Ring on the Membrane Properties of Sterols. Grazing Incidence X-Ray Diffraction and Brewster Angle Microscopy Studies

Three cholesterol precursors-desmosterol, zymosterol, and lanosterol-were comprehensively characterized in monolayers formed at the air/water interface. The studies were based on registration of the surface pressure (π)-area (A) isotherms complemented with in situ analysis performed with application of modern physicochemical techniques: grazing incidence X-ray diffraction (GIXD) and Brewster angle microscopy (BAM). In this approach we were interested in the correlation between molecular structures of the studied sterols found in the cholesterol biosynthetic pathway and their membrane properties. Our results revealed that only desmosterol behaves in Langmuir monolayers comparably to cholesterol, the molecules of which arrange in the monolayers into a hexagonal lattice, while the two remaining sterols possess extremely different properties. We found that molecules of both zymosterol and lanosterol are organized on the water surface in the two-dimensional oblique unit cells despite the fact that they are oriented perpendicular to the monolayer plane. The comparison of chemical structures of the investigated sterols leads to the conclusion that the only structural motive that can be responsible for such unusual behavior is the double bond in the B sterol ring, which is located in desmosterol in a different position from in the other two sterols. This issue, which was neglected in the scientific literature, seems to have crucial importance for sterol activity in biomembranes. We showed that this structural modification in sterol molecules is directly responsible for their adaptation to proper functioning in biomembranes.

Rigid urea and self-healing thiourea ethanolamine monolayers

A series of long-tail alkyl ethanolamine analogs containing amide-, urea-, and thiourea moieties was synthesized and the behavior of the corresponding monolayers was assessed on the Langmuir-Pockels trough combined with grazing incidence X-ray diffraction experiments and complemented by computer simulations. All compounds form stable monolayers at the soft air/water interface. The phase behavior is dominated by strong intermolecular headgroup hydrogen bond networks. While the amide analog forms well-defined monolayer structures, the stronger hydrogen bonds in the urea analogs lead to the formation of small three-dimensional crystallites already during spreading due to concentration fluctuations. The hydrogen bonds in the thiourea case form a two-dimensional network, which ruptures temporarily during compression and is recovered in a self-healing process, while in the urea clusters the hydrogen bonds form a more planar framework with gliding planes keeping the structure intact during compression. Because the thiourea analogs are able to self-heal after rupture, such compounds could have interesting properties as tight, ordered, and self-healing monolayers.

Structure of Cholesterol in Lipid Rafts

Rafts, or functional domains, are transient nano-or mesoscopic structures in the plasma membrane and are thought to be essential for many cellular processes such as signal transduction, adhesion, trafficking, and lipid or protein sorting. Observations of these membrane heterogeneities have proven challenging, as they are thought to be both small and short lived. With a combination of coarse-grained molecular dynamics simulations and neutron diffraction using deuterium labeled cholesterol molecules, we observe raftlike structures and determine the ordering of the cholesterol molecules in binary cholesterol-containing lipid membranes. From coarse-grained computer simulations, heterogenous membranes structures were observed and characterized as small, ordered domains. Neutron diffraction was used to study the lateral structure of the cholesterol molecules. We find pairs of strongly bound cholesterol molecules in the liquid-disordered phase, in accordance with the umbrella model. Bragg peaks corresponding to ordering of the cholesterol molecules in the raftlike structures were observed and indexed by two different structures: a monoclinic structure of ordered cholesterol pairs of alternating direction in equilibrium with cholesterol plaques, i.e., triclinic cholesterol bilayers.

Acetylsalicylic acid (ASA) increases the solubility of cholesterol when incorporated in lipid membranes

Cholesterol has been well established as a mediator of cell membrane fluidity. By interacting with lipid tails, cholesterol causes the membrane tails to be constrained thereby reducing membrane fluidity, well known as the condensation effect. Acetylsalicylic acid (ASA), the main ingredient in aspirin, has recently been shown to increase fluidity in lipid bilayers by primarily interacting with lipid head groups. We used high-resolution X-ray diffraction to study both ASA and cholesterol coexisting in model membranes of dimyristoylphosphatidylcholine (DMPC). While a high cholesterol concentration of 40 mol% cholesterol leads to the formation of immiscible cholesterol bilayers, as was reported previously, increasing the amount of ASA in the membranes between 0 to 12.5 mol% was found to significantly increase the fluidity of the bilayers and dissolve the cholesterol plaques. We, therefore, present experimental evidence for an interaction between cholesterol and ASA on the level of the cell membrane at elevated levels of cholesterol and ASA.

The interaction between amyloid-β peptides and anionic lipid membranes containing cholesterol and melatonin

One of the hallmarks of Alzheimer's disease is the formation of senile plaques, primarily consisting of amyloid- (A) peptides. Peptide-membrane and peptide-lipid interactions are thought to be crucial in this process. We studied the interaction of A and A peptides with anionic lipid membranes made of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphoserine (DMPS) using X-ray diffraction. We compare the experimentally determined electron densities in the gel state of the membranes with density calculations from peptide structures reported in the Protein Data Bank in order to determine the position of the peptide in the bilayers. The full length peptide A was found to embed in the hydrocarbon core of the anionic lipid bilayers. Two populations were found for the A peptide: (1) membrane-bound states in the hydrophilic head group region of the bilayers, where the peptides align parallel to the membranes, and (2) an embedded state in the bilayer center. Aging plays an important role in the development of Alzheimer's, in particular with respect to changes in cholesterol and melatonin levels in the brain tissue. Immiscible cholesterol plaques were created by addition of 30 mol% cholesterol to the anionic membranes. The A peptides were found to strongly interact with the lipid bilayers, displacing further cholesterol molecules into the plaques, effectively lowering the cholesterol concentration in the membranes and increasing the total fraction of cholesterol plaques. Addition of 30 mol% melatonin molecules to the anionic membranes drastically reduced the population of the membrane-embedded A state. These results present experimental evidence for an interaction between A peptides, melatonin and cholesterol in lipid membranes.

Behavior of platelet activating factor in membrane-mimicking environment. Langmuir monolayer study complemented with grazing incidence X-ray diffraction and Brewster angle microscopy

1-O-octadecyl-2-acetyl-sn-glycero-3-phosphocholine (PAF) belonging to the class of single-chained ether phospholipids is widely known from its essential biological activities. There is a growing body of evidence that some significant aspects of PAF actions are connected with its capability to direct intercalation into biomembranes' environment. Although this mechanism is of great importance in the perspective of understanding PAF implications in various physiological processes, in the literature, there is a lack of studies devoted to this subject. It is still unknown which is the exact influence of membrane composition, molecular organization, and its other properties on the PAF impact on cells and tissues. Unfortunately, the biological studies carried out on cell cultures do not provide satisfactory results, mainly because of the complexity of natural systems. In order to obtain insight into the behavior of PAF in a lipid environment at the molecular level, the application of appropriate model systems is required. Among them, Langmuir monolayers are very often applied as a simple but very efficient platform for studies of the interactions between membrane lipids. In the present paper, special attention is focused on the issue concerning the interactions between PAF and two representatives of membrane components occurring mainly in the outer leaflet of natural bilayers, namely, cholesterol and DPPC. The application of Langmuir monolayers enabled us to construct the effective model mimicking the exogenous incorporation of PAF into membrane environment. On the basis of the obtained results, a thorough discussion was carried out and the conclusions derived from the traditional thermodynamic analysis were confronted with microscopic analysis of surface domains and the GIXD results. The selection of experimental techniques enables us to obtain information regarding the miscibility and interactions in the binary mixed films as well as the molecular organization of film-forming molecules on water surface. The experiments revealed that the addition of the investigated single-chained ether phospholipid into both cholesterol and DPPC monolayers causes a considerable decrease of monolayer condensation. On the basis of thermodynamic analysis, it was found that PAF mixes and consequently interacts strongly with cholesterol, whereas its interactions with DPPC are thermodynamically unfavorable. Differences between the PAF influence on cholesterol and DPPC monolayer found its corroboration in the results obtained with the GIXD technique. Namely, the monolayer of DPPC can incorporate more PAF than the model membrane containing cholesterol. The obtained results indicate that short chained sn-2 ether phospholipid is able to modify model membrane properties in a concentration-dependent way.

Spontaneous formation of two-dimensional and three-dimensional cholesterol crystals in single hydrated lipid bilayers

Grazing incidence x-ray diffraction measurements were performed on single hydrated bilayers and monolayers of Ceramide/Cholesterol/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocyholine at varying concentrations. There are substantial differences in the phase and structure behavior of the crystalline domains formed within the bilayers relative to the corresponding monolayers, due to interactions between the opposing lipid leaflets. Depending on the lipid composition, these interactions lead to phase separation and formation of cholesterol crystals. The cholesterol and ceramide/cholesterol mixed phases were further characterized at 37°C by immunolabeling with specific antibodies recognizing ordered molecular arrays of cholesterol. Previous studies have shown that cholesterol may nucleate in artificial membranes to form thick two-dimensional bilayer crystals. The study herein demonstrates further growth of cholesterol into three-dimensional crystals. We believe that these results may provide further insight into the formation of cholesterol crystals in early stages of atherosclerosis inflammation.

Studying interfacial reactions of cholesterol sulfate in an unsaturated phosphatidylglycerol layer with ozone using field induced droplet ionization mass spectrometry

Field-induced droplet ionization (FIDI) is a recently developed ionization technique that can transfer ions from the surface of microliter droplets to the gas phase intact. The air-liquid interfacial reactions of cholesterol sulfate (CholSO(4)) in a 1-palmitoyl-2-oleoyl-sn-phosphatidylglycerol (POPG) surfactant layer with ozone (O(3)) are investigated using field-induced droplet ionization mass spectrometry (FIDI-MS). Time-resolved studies of interfacial ozonolysis of CholSO(4) reveal that water plays an important role in forming oxygenated products. An epoxide derivative is observed as a major product of CholSO(4) oxidation in the FIDI-MS spectrum after exposure of the droplet to O(3) for 5 s. The abundance of the epoxide product then decreases with continued O(3) exposure as the finite number of water molecules at the air-liquid interface becomes exhausted. Competitive oxidation of CholSO(4) and POPG is observed when they are present together in a lipid surfactant layer at the air-liquid interface. Competitive reactions of CholSO(4) and POPG with O(3) suggest that CholSO(4) is present with POPG as a well-mixed interfacial layer. Compared with CholSO(4) and POPG alone, the overall ozonolysis rates of both CholSO(4) and POPG are reduced in a mixed layer, suggesting the double bonds of both molecules are shielded by additional hydrocarbons from one another. Molecular dynamics simulations of a monolayer comprising POPG and CholSO(4) correlate well with experimental observations and provide a detailed picture of the interactions between CholSO(4), lipids, and water molecules in the interfacial region.

Langmuir and Langmuir-Blodgett films of multifunctional, amphiphilic polyethers with cholesterol moieties

Langmuir films of multifunctional, hydrophilic polyethers containing a hydrophobic cholesterol group (Ch) were studied by surface pressure-mean molecular area (π-mmA) measurements and Brewster angle microscopy (BAM). The polyethers were either homopolymers or diblock copolymers of linear poly(glycerol) (lPG), linear poly(glyceryl glycidyl ether) (lPGG), linear poly(ethylene glycol) (lPEG), or hyperbranched poly(glycerol) (hbPG). Surface pressure measurements revealed that the homopolymers lPG and hbPG did not stay at the water surface after spreading and solvent evaporation, in contrast to lPEG. Because of the incorporation of the Ch group in the polymer structure, stable Langmuir films were formed by Ch-lPG(n), Ch-lPGG(n), and Ch-hbPG(n). The Ch-hbPG(n), Ch-lPEG(n), Ch-lPEG(n)-b-lPG(m), Ch-lPEG(n)-b-lPGG(m), and Ch-lPEG(n)-b-hbPG(m) systems showed an extended plateau region assigned to a phase transition involving the Ch groups. Typical hierarchically ordered morphologies of the LB films on hydrophilic substrates were observed for all Ch-initiated polymers. All LB films showed that Ch of the Ch-initiated homopolymers is able to crystallize. This strong tendency of self-aggregation then triggers further dewetting effects of the respective polyether entities. Fingerlike morphologies are observed for Ch-lPEG(69), since the lPEG(69) entity is able to undergo crystallization after transfer onto the silicon substrate.

Crystalline lipid domains: characterization by X-ray diffraction and their relation to biology

Biological membranes comprise thousands of different lipids, differing in their alkyl chains, headgroups, and degree of saturation. It is estimated that 5% of the genes in the human genome are responsible for regulating the lipid composition of cell membranes. Conceivably, the functional explanation for this diversity is found, at least in part, in the propensity of lipids to segregate into distinct domains, which are important for cell function. X-ray diffraction has been used increasingly to characterize the packing and phase behavior of lipids in membranes. Crystalline domains have been studied in synthetic membranes using wide- and small-angle X-ray scattering, and grazing incidence X-ray diffraction. Herein we summarize recent results obtained using the various X-ray methods, discuss the correlation between crystalline domains and liquid ordered domains studied with other techniques, and the relevance of crystalline domains to functional lipid domains in biological membranes.

Crystalline domain structure and cholesterol crystal nucleation in single hydrated DPPC:cholesterol:POPC bilayers

Grazing incidence X-ray diffraction measurements were performed on single hydrated bilayers and monolayers of DPPC:Cholesterol:POPC at varying concentrations. There are substantial differences in the phase and structure behavior of the crystalline domains formed within the bilayers relative to the corresponding monolayers, due to interactions between the opposing leaflets. Depending on the lipid composition, these interactions led to phase separation, changes in molecular tilt angle, or formation of cholesterol crystals. In monolayers, DPPC and cholesterol form a single crystalline phase at all compositions studied. In bilayers, a second crystalline phase appears when cholesterol levels are increased: domains of cholesterol and DPPC form monolayer thick crystals where each of the lipid leaflets diffracts independently, whereas excess cholesterol forms cholesterol bilayer thick crystals at a DPPC:Chol ratio < 46:54 +/- 2 mol %. The nucleation of the cholesterol crystals occurs at concentrations relevant to the actual cell plasma membrane composition.

Cholesterol-phospholipid interactions: new insights from surface x-ray scattering data

We report a structural study of cholesterol-DPPC (1,2-dipalmitoyl-sn-glycero-3-phophocholine) monolayers using x-ray reflectivity and grazing incidence x-ray diffraction. Reflectivity reveals that the vertical position of cholesterol relative to phospholipids strongly depends on its mole fraction (chi(CHOL)). Moreover, we find that at a broad range of chi(CHOL) cholesterol and DPPC form alloylike mixed domains of short-range order and the same stoichiometry as that of the film. Based on the data presented, we propose a new model of cholesterol-phospholipid organization in mixed monolayers.

Lipid-modulated pharmacophore nanorods assembled at the air/water interface

Biomimetic pharmacophores deposited at the air/water interface self-assemble into distinct crystalline nanostructures. The shapes and dimensions of the nanostructures are significantly modulated by the lipid environments in mixed lipid/DAG-lactone monolayers.

Hydrated cholesterol: phospholipid domains probed by synchrotron radiation

X-ray scattering experiments on mixed films of cholesterol and phospholipids at air-water and Si solid-water interfaces were undertaken to glean information on pathological crystallization of cholesterol bilayers. Grazing-incidence X-ray diffraction patterns at the air-water interface of various cholesterol:dipalmitoyl-phosphatidylcholine (Ch:DPPC) monolayer mixtures compressed beyond monolayer collapse yielded the established 10 x 7.5 Ų Ch bilayer motif, for Ch:DPPC molar ratios higher than 2.5:1. Attempts to obtain a diffraction signal from various Ch:phospholipid film mixtures at the Si solid-water interface, indicative of the presence of the Ch bilayer motif, were unsuccessful. Only after removal of sufficient water from the cell was a weak diffraction signal obtained suggestive of a cholesterol film two bilayers thick. Off-specular X-ray reflectivity measurements made on a 1.75:1 mixture of Ch and bovine cardiac phosphatidylcholine (BCPC) deposited as a bilayer on a Si wafer and placed in a cell filled with water yielded positive results. The derived electron density profile showed the presence of a bilayer mixture consistent with a phase separation of cholesterol and BCPC, and possible formation of a crystalline cholesterol bilayer within the hydrated mixed bilayer, but not a proof thereof.