Phase behavior and aggregate structure in mixtures of dioleoylphosphatidylethanolamine and poly(ethylene glycol)-lipids

Phase Behavior of Pure PSPC and PEGylated Multicomponent Lipid and Their Interaction with Paclitaxel: An All-Atom MD Study

Exploring structural behavior of pure 1-palmitoyl-2-stearoyl-sn-glycero-3-phosphocholine (PSPC) and multicomponent PSPC and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N[amino(poly(ethylene glycol))-2000] (DSPE-PEG₂₀₀₀) membranes and their interaction with pharmaceutically important drugs carry huge importance in drug delivery. Using all-atom molecular dynamics (MD) simulations, we investigated the phase behavior of pure and PEGylated membranes at the temperature range of 280-360 K. We observe a gel-to-liquid crystalline phase transition for pure PSPC between 320 and 330 K, and in the case of multicomponent membranes, at 320 K, a coexistence of order-disorder phases is observed, which gradually transform to a complete liquid crystalline to gel phase between 320 and 310 K. We further studied the interaction of Paclitaxel with pure PSPC and PEGylated bilayers and elucidated the interaction behavior of Paclitaxel at the bilayer interfaces. Understanding of structural and interaction behaviors of the PEGylated bilayers with Paclitaxel will help to explore Paclitaxel-based drug applications in the future.

Cationic Liposomes as Vectors for Nucleic Acid and Hydrophobic Drug Therapeutics

Cationic liposomes (CLs) are effective carriers of a variety of therapeutics. Their applications as vectors of nucleic acids (NAs), from long DNA and mRNA to short interfering RNA (siRNA), have been pursued for decades to realize the promise of gene therapy, with approvals of the siRNA therapeutic patisiran and two mRNA vaccines against COVID-19 as recent milestones. The long-term goal of developing optimized CL-based NA carriers for a broad range of medical applications requires a comprehensive understanding of the structure of these vectors and their interactions with cell membranes and components that lead to the release and activity of the NAs within the cell. Structure-activity relationships of lipids for CL-based NA and drug delivery must take into account that these lipids act not individually but as components of an assembly of many molecules. This review summarizes our current understanding of how the choice of the constituting lipids governs the structure of their CL-NA self-assemblies, which constitute distinct liquid crystalline phases, and the relation of these structures to their efficacy for delivery. In addition, we review progress toward CL-NA nanoparticles for targeted NA delivery in vivo and close with an outlook on CL-based carriers of hydrophobic drugs, which may eventually lead to combination therapies with NAs and drugs for cancer and other diseases.

Pegylated liquisomes: A novel combined passive targeting nanoplatform of L-carnosine for breast cancer

PEGylated Liquisomes (P-Liquisomes), a novel drug delivery system was designed for the first time by incorporating phospholipid complex in PEGylated liquid crystalline nanoparticles (P-LCNPs). L-carnosine (CN), a challenging dipeptide, has proven to be a promising anti-cancer drug. However, it exhibits high water solubility and extensive in-vivo degradation that halts its use. The objective of this work was to investigate the ability of our novel system to improve the CN anticancer activity by prolonging it's release and protecting it in-vivo. In-vitro appraisal revealed spherical light-colored vesicles encapsulated in the liquid crystals, confirming the successful formation of the combined system. P-Liquisomes were nano-sized (149.3 ± 1.4 nm), with high ZP (-40.2 ± 1.5 mV), complexation efficiency (97.5 ± 0.9%) and outstanding sustained release of only 75.4% released after 24 h, compared to P-LCNPs and Phytosomes. The results obtained with P-Liquisomes are considered as a break through compared to P-LCNPs or Phytosomes alone, especially when dealing with the hydrophilic CN. In-vitro cytotoxicity evaluation, revealed superior cytotoxic effect of P-Liquisomes (IC₅₀ = 25.9) after 24 h incubation. Besides, P-Liquisomes proved to be non-toxic in-vivo and succeeded to show superior chemopreventive activity manifested by reduction of; % tumor growth (7.1%), VEGF levels (14.3 pg/g tissue), cyclin D1 levels 15.5 ng/g tissue and elevation in caspase-3 level (36.4 ng/g tissue), compared to Phytosomes and CN solution. Conclusively, P-Liquisomes succeded to achieve the maximum therapeutic outcome of CN without altering its activity and might be used as a sustained delivery system for other promising hydrophilic compounds.

Coarse-grained simulation of the self-assembly of lipid vesicles concomitantly with novel block copolymers with multiple tails

We carried out a series of coarse-grained molecular dynamics liposome-copolymer simulations with varying extent of copolymer concentration in an attempt to understand the effect of copolymer structure and concentration on vesicle self-assembly and stability. For one particular case molecular dynamics simulation data was successfully verified against experimental NMR results enhancing the credulity in the simulation methodology. The study focused on a new class of promising copolymers based on ethylene oxide (EO) chains and short blocks of aliphatic double chains that mimic lipid tails. The lipid mimetic units are based on 1,3-didodecyloxy-2-glycidylglycerol (DDGG) and 1,3-didodecyloxy-propane-2-ol (DDP). The conducted simulations indicate that multiple lipid anchor-bearing copolymers lead to stable hybrid liposome formations. Single lipid bearing might incur liposome-stabilizing potential for relatively small ethylene oxide chains but fails dramatically in combination with a longer EO-based moiety. The consistency of the theoretical evidence with experimental NMR observation for certain cases provides confidence for the relevance of the methodology in eliciting the factors governing liposome-polymer stability which is of fundamental and practical significance.

Oxidation-Triggerable Liposome Incorporating Poly(Hydroxyethyl Acrylate-co-Allyl methyl sulfide) as an Anticancer Carrier of Doxorubicin

Since cancer cells are oxidative in nature, anti-cancer agents can be delivered to cancer cells specifically without causing severe normal cell toxicity if the drug carriers are designed to be sensitive to the intrinsic characteristic. Oxidation-sensitive liposomes were developed by stabilizing dioleoylphosphatidyl ethanolamine (DOPE) bilayers with folate-conjugated poly(hydroxyethyl acrylate-co-allyl methyl sulfide) (F-P(HEA-AMS)). The copolymer, synthesized by a free radical polymerization, was surface-active but lost its surface activity after AMS unit was oxidized by H₂O₂ treatment. The liposomes with F-P(HEA-AMS) were sensitive to H₂O₂ concentration (0%, 0.5%, 1.0%, and 2.0%) in terms of release, possibly because the copolymer lost its surface activity and its bilayer-stabilizing ability upon oxidation. Fluorescence-activated cell sorting (FACS) and confocal laser scanning microscopy (CLSM) revealed that doxorubicin (DOX)-loaded liposomes stabilized with folate-conjugated copolymers markedly promoted the transport of the anti-cancer drug to cancer cells. This was possible because the liposomes were readily translocated into the cancer cells via receptor-mediated endocytosis. This liposome would be applicable to the delivery carrier of anticancer drugs.

Preparation of nanoliposomes linked to HER2/neu-derived (P5) peptide containing MPL adjuvant as vaccine against breast cancer

The study was aimed at evaluating antitumor and immunomodulatory effects of liposomal vaccine composed of P5 human epidermal growth factor receptor 2 (HER2)/neu-derived peptide coupled to the surface of high-temperature nanoliposomes containing distearoylphosphocholine:distearoylphosphoglycerol:Chol:dioleoylphosphatidylethanolamine (DOPE) comprising monophosphoryl lipid A (MPL) adjuvant in HER2/neu overexpressing the breast cancer model. BALB/c mice bearing TUBO carcinoma were subcutaneously immunized with formulations containing 10 µg P5 peptide and 25 µg MPL three times with 2-week intervals. To determine immuno responses in immunized mice, the amount of released interferon-γ and IL-4 were measured by the enzyme-linked immunospot method and the flow cytometric analysis on the isolated splenocytes. The results demonstrated that tumor-bearing mice immunized with Lip/DOPE/MPL/P5 formulation had the most released interferon-γ and the highest cytotoxic T lymphocyte responses that led to the lowest tumor size and the longest survival time than those of other formulations. The results achieved by Lip/DOPE/MPL/P5 formulation could make it a suitable candidate to induce effective antigen-specific tumor immunity against breast cancer.

Developing a novel cholesterol-based nanocarrier with high transfection efficiency and serum compatibility for gene therapy

BACKGROUND/PURPOSE

Primary cells are sensitive to culture conditions, which can be more difficult to get efficient transfection. The purpose of this study is to develop a serum-compatible cholesterol-based nanocarrier for delivering therapeutic nucleic acids into cells efficiently for future clinical gene therapy.

METHODS

A novel cationic 3-β-[N-(2-guanidinoethyl)carbamoyl]-cholesterol (GEC-Chol) was mixed with cholesterol and superparamagnetic iron oxide (SPIO) nanoparticles to form GCC-Fe₃O₄ nanocarrier. Transfection efficiency and cytotoxicity in serum and non-serum conditions were evaluated. Florescent-labeled oligonucleotides (ODNs) were transfected as indicators. Fluorescent microscopy, confocal microscopy, and flow cytometry analysis were used for evaluations. Besides, we also delivered functional antisense c-myc ODNs as surrogates for specific gene manipulation in vitro.

RESULTS

Results indicated that GCC-Fe₃O₄ nanocarrier could have size down to less than 135 nm, which structure was highly stable and consistent over time. It also showed great transfection efficiency and low cytotoxicity in both serum and non-serum conditions. Our results demonstrated that GCC-Fe₃O₄ nanocarrier had exceeded 90% transfection efficiency, which was much better than common commercialized transfection reagents under same conditions. Such nanocarrier not only worked well in cell lines, but also ideal for gene delivery in primary cells.

CONCLUSION

With high transfection efficiency and serum compatibility, this novel biocompatible cholesterol-based nanocarrier provides an ideal platform especially for RNAi-based gene manipulation. It also opens a wide range of biomedical applications for in vivo cell tracking and gene therapeutics for clinical usage.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Diminishing the side effect of mitomycin C by using pH-sensitive liposomes: in vitro characterization and in vivo pharmacokinetics

Introduction

Mitomycin C is an anticancer antibiotic agent that has the potential for broad-spectrum use against several cancers, including mammary cancers. Because its half-life is 17 min after a 30 mg intravenous bolus administration, the suitability of mitomycin C for wide use in the clinical setting is limited. Based on tumor pathophysiology, pH-sensitive liposomes could provide better tumor-targeted effects. The aim of this study was to investigate the possibility of diminishing the side effect of mitomycin C by using pH-sensitive liposomes.

Materials and methods

pH-sensitive liposomes was employed to deliver mitomycin C and evaluate the characterization, release behaviors, cytotoxicity, in vivo pharmacokinetics and biochemical assay.

Results

The results demonstrated that mitomycin C-loaded pH-sensitive liposomes had a particle diameter of 144.5±2.8 nm and an entrapment efficiency of 66.5%. The in vitro release study showed that the pH-sensitive liposome release percentages at pH 7.4 and pH 5.5 were approximately 47% and 93%, respectively. The cell viability of MCF-7 cells showed that both the solution and liposome group exhibited a concentration-dependent effect on cell viability. The MCF-7 cell uptake of pH-sensitive liposomes with a folate modification was higher which was indicated by an increased fluorescence intensity compared to that without a folate modification. The area under the concentration-time curve of mitomycin C-loaded pH-sensitive liposomes (18.82±0.51 µg·h/L) was significantly higher than that of the mitomycin C solution group (10.07±0.31 µg·h/L). The mean residence times of the mitomycin C-loaded and mitomycin C solution groups were 1.53±0.16 and 0.05 h, respectively. In addition, there was no significant difference in terms of V_ss (p>0.05). Moreover, the half-life of pH-sensitive liposomes and the mitomycin C solution was 1.35±0.15 and 1.60±0.04 h, respectively. In terms of safety, mitomycin C-loaded pH-sensitive liposomes did not affect the platelet count and the levels of blood urea nitrogen and aspartate aminotransferase.

Conclusion

The positive results of pH-sensitive liposomes demonstrated maintained the cytotoxicity and decrease the side effect.

Direct monitoring of lipid transfer on exposure of citrem nanoparticles to an ethanol solution containing soybean phospholipids by combining synchrotron SAXS with microfluidics

Lipid exchange among citrem nanoparticles and an ethanol micellar solution containing soy phosphatidylcholine was investigated in situ by coupling small angle X-ray scattering with a microfluidic device. The produced soy phosphatidylcholine/citrem nanoparticles have great potential in the development of hemocompatible nanocarriers for drug delivery.

Tunable Surface Properties of Temperature-Responsive Polymer-Modified Liposomes Induce Faster Cellular Uptake

Drug delivery by nanoparticle carriers has been limited by inefficient intracellular drug delivery. Temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-modified liposomes can release their content following heating. In this study, we synthesized the temperature-responsive polymer poly(N-isopropylacrylamide)-co-N,N'-dimethylaminopropylacrylamide (P(NIPAAm-co-DMAPAAm)) and investigated the properties of liposomes modified with P(NIPAAm-co-DMAPAAm) for intracellular drug carriers. The copolymer displayed a thermosensitive transition at a lower critical solution temperature (LCST) that is higher than body temperature. Above the LCST, the temperature-responsive liposomes started to aggregate and release. The liposomes showed a fixed aqueous layer thickness (FALT) at the surface below the LCST, and the FALT decreased with increasing temperature. Above 37 °C, cytosolic release from the temperature-responsive liposomes was higher than that from the PEGylated liposomes, indicating intracellular uptake. Here, we showed that the tunable surface properties of the temperature-responsive polymer-modified liposomes possibly enabled their dehydration by heating, which likely induced a faster cellular uptake and release. Therefore, the liposomes could be highly applicable for improving intracellular drug-delivery carriers.

Long-Circulating, pH-Sensitive Liposomes

A major limiting factor for the wide application of pH-sensitive liposomes is their recognition and sequestration by the phagocytes of the reticuloendothelial system, which conditions a very short circulation half-life. Typically prolonged circulation of liposomes is achieved by grafting their membranes with pegylated phospholipids (PEG-lipids), which have been shown, however, to deteriorate membrane integrity on one hand and to hamper the pH-responsiveness on the other. Hence, the need for novel alternative surface modifying agents to ensure effective half-life prolongation of pH-sensitive liposomes is a subject of intensive research. A series of copolymers having short blocks of lipid-mimetic units has been shown to sterically stabilize conventional liposomes based on different phospholipids. This has prompted us to broaden their utilization to pH-sensitive liposomes, too. The present contribution gives a thorough account on the chemical synthesis of these copolymers their incorporation in DOPE:CHEMs pH-sensitive liposomes and detailed explanation on the battery of techniques for the biopharmaceutical characterization of the prepared formulations in terms of pH-responsiveness, cellular internalization, in vivo pharmacokinetics and biodistribution.

Bridging small interfering RNA with giant therapeutic outcomes using nanometric liposomes

The scope of RNAi based therapeutics is unquestionable. However, if we dissect the current trend of clinical trials for afore mentioned drug class, some stark trends appear: 1) naked siRNA only exerts influence in topical mode whilst systemic delivery requires a carrier and 2) even after two decades of extensive efforts, not even a single siRNA containing product is commercially available. It was therefore felt that a perspective simplifying the unique intricacies of working with a merger of siRNA and liposomes from a pharmaceutical viewpoint could draw the attention of a wider array of interested researchers. We begin from the beginning and attempt to conduit the gap between theoretical logic and experimental/actual constraints. This, in turn could stimulate the next generation of investigators, gearing them to tackle the conundrum, which is siRNA delivery.

PEGylation of phytantriol-based lyotropic liquid crystalline particles--the effect of lipid composition, PEG chain length, and temperature on the internal nanostructure

Poly(ethylene glycol)-grafted 1,2-distearoyl-sn-glycero-3-phosphoethanolamines (DSPE-mPEGs) are a family of amphiphilic lipopolymers attractive in formulating injectable long-circulating nanoparticulate drug formulations. In addition to long circulating liposomes, there is an interest in developing injectable long-circulating drug nanocarriers based on cubosomes and hexosomes by shielding and coating the dispersed particles enveloping well-defined internal nonlamellar liquid crystalline nanostructures with hydrophilic PEG segments. The present study attempts to shed light on the possible PEGylation of these lipidic nonlamellar liquid crystalline particles by using DSPE-mPEGs with three different block lengths of the hydrophilic PEG segment. The effects of lipid composition, PEG chain length, and temperature on the morphology and internal nanostructure of these self-assembled lipidic aqueous dispersions based on phytantriol (PHYT) were investigated by means of synchrotron small-angle X-ray scattering and Transmission Electron Cryo-Microscopy. The results suggest that the used lipopolymers are incorporated into the water-PHYT interfacial area and induce a significant effect on the internal nanostructures of the dispersed submicrometer-sized particles. The hydrophilic domains of the internal liquid crystalline nanostructures of these aqueous dispersions are functionalized, i.e., the hydrophilic nanochannels of the internal cubic Pn3m and Im3m phases are significantly enlarged in the presence of relatively small amounts of the used DSPE-mPEGs. It is evident that the partial replacement of PHYT by these PEGylated lipids could be an attractive approach for the surface modification of cubosomal and hexosomal particles. These PEGylated nanocarriers are particularly attractive in designing injectable cubosomal and hexosomal nanocarriers for loading drugs and/or imaging probes.

pH-responsive biodegradable assemblies containing tunable phenyl-substituted vinyl ethers for use as efficient gene delivery vehicles

Novel pH-responsive assemblies (PEG-lipid:DOPE liposomes) containing tunable and bifunctional phenyl-substituted vinyl ether (PIVE) cross-linkers were prepared. The assemblies consisted of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), acid-cleavable poly(ethylene glycol) (PEG)-conjugated lipids, pDNA, and protamine sulfate (PS). The PIVE linkage was designed to hydrolyze under acidic conditions, and the hydrolysis studies of PEG-lipid compounds containing PIVE at pH 4.2, 5.4, and 7.4 indicated that the hydrolysis rates of PIVE linker were influenced by the substitution of electron withdrawing or electron donating groups on the phenyl ring. Acid-catalyzed hydrolysis of PIVE leads to destabilization of the acid labile PEG-PIVE-lipid:DOPE liposomes via dePEGylation, thereby triggering content release. Content release assays showed that dePEGylation was highly pH-dependent and correlated with the PIVE proton affinity of the phenyl group. These results indicated that the dePEGylative triggering based on a new pH-sensitive PIVE linkage can be controlled. In vitro transfection studies on the pH-responsive assemblies containing mPEG-(MeO-PIVE)-conjugated 1,3-dioctadecyl-rac-glycerol lipids (mPEG-(MeO-PIVE])-DOG) showed higher transfection efficiency compared to that of polyethylenimine (PEI), a positive control, on HEK 293 and COS-7 cells. In addition, lower cytotoxicity of PEG-PIVE-lipid:DOPE liposomes/PS/DNA was observed in comparison to PEI. These results suggest that PEG-PIVE-lipid:DOPE liposomes can be considered as nonviral vehicles for drug and gene delivery applications.

Lipid nature and their influence on opening of redox-active liposomes

The pathway for content release from reduction-sensitive liposomes based on a quinone-dioleoylphosphatidylethanolamine lipid conjugate (Q-DOPE) is outlined using results from fluorescent dye content release assays as well as single- and multiple-angle light scattering. Experimental observations are consistent with a shape/size change of the reduced liposomes prior to their aggregation, with subsequent near-quantitative content release achieved only when the lipid membrane experiences conditions favorable to a lamellar to an inverted hexagonal phase transition. Addition of poly(ethyleneglycol)-modified DOPE (PEG-DOPE) to the Q-DOPE liposomal formulation results in stabilization of the lipid bilayer, whereas incorporation of DOPE yields faster content release. At high DOPE concentrations, DOPE/PEG-DOPE/Q-DOPE liposomes exhibit larger content release, indicating a change in pathway for content release. The outcomes here provide a better understanding of the underlying principles of triggered liposomal content release and the potential utility of specific lipid properties for the rational design of drug delivery systems based on the novel Q-DOPE lipid.

The impact of vaporized nanoemulsions on ultrasound-mediated ablation

Background

The clinical feasibility of using high-intensity focused ultrasound (HIFU) for ablation of solid tumors is limited by the high acoustic pressures and long treatment times required. The presence of microbubbles during sonication can increase the absorption of acoustic energy and accelerate heating. However, formation of microbubbles within the tumor tissue remains a challenge. Phase-shift nanoemulsions (PSNE) have been developed as a means for producing microbubbles within tumors. PSNE are emulsions of submicron-sized, lipid-coated, and liquid perfluorocarbon droplets that can be vaporized into microbubbles using short (<1 ms), high-amplitude (>5 MPa) acoustic pulses. In this study, the impact of vaporized phase-shift nanoemulsions on the time and acoustic power required for HIFU-mediated thermal lesion formation was investigated in vitro.

Methods

PSNE containing dodecafluoropentane were produced with narrow size distributions and mean diameters below 200 nm using a combination of sonication and extrusion. PSNE was dispersed in albumin-containing polyacrylamide gel phantoms for experimental tests. Albumin denatures and becomes opaque at temperatures above 58°C, enabling visual detection of lesions formed from denatured albumin. PSNE were vaporized using a 30-cycle, 3.2-MHz, at an acoustic power of 6.4 W (free-field intensity of 4,586 W/cm²) pulse from a single-element, focused high-power transducer. The vaporization pulse was immediately followed by a 15-s continuous wave, 3.2-MHz signal to induce ultrasound-mediated heating. Control experiments were conducted using an identical procedure without the vaporization pulse. Lesion formation was detected by acquiring video frames during sonication and post-processing the images for analysis. Broadband emissions from inertial cavitation (IC) were passively detected with a focused, 2-MHz transducer. Temperature measurements were acquired using a needle thermocouple.

Results

Bubbles formed at the HIFU focus via PSNE vaporization enhanced HIFU-mediated heating. Broadband emissions detected during HIFU exposure coincided in time with measured accelerated heating, which suggested that IC played an important role in bubble-enhanced heating. In the presence of bubbles, the acoustic power required for the formation of a 9-mm³ lesion was reduced by 72% and the exposure time required for the onset of albumin denaturation was significantly reduced (by 4 s), provided that the PSNE volume fraction in the polyacrylamide gel was at least 0.008%.

Conclusions

The time or acoustic power required for lesion formation in gel phantoms was dramatically reduced by vaporizing PSNE into bubbles. These results suggest that PSNE may improve the efficiency of HIFU-mediated thermal ablation of solid tumors; thus, further investigation is warranted to determine whether bubble-enhanced HIFU may potentially become a viable option for cancer therapy.

Effective targeted gene delivery to dendritic cells via synergetic interaction of mannosylated lipid with DOPE and BCAT

The efficient delivery of plasmids encoding antigenic determinants into dendritic cells (DCs) that control immune response is a promising strategy for rapid development of new vaccines. In this study, we prepared a series of targeted cationic lipoplex based on two synthetic lipid components, mannose-poly(ethylene glycol, MW3000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (Mannose-PEG3000-DSPE) and O-(2R-1,2-di-O-(1'Z-octadecenyl)-glycerol)-3-N-(bis-2-aminoethyl)-carbamate (BCAT), that were formulated with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) for evaluation as nonviral vectors for transgene expression in DCs. First, we optimized the N/P ratio for maximum transfection and then screened the effects of mannose targeting for further enhancement of transfection levels. Our results indicate that efficient delivery of gWIZ GFP plasmid into DCs was observed for mannose compositions of ∼10%, whereas low transfection efficiencies were observed with nontargeted formulations. Mannose-targeted lipofectamine complexes also showed high GFP expression levels in DCs relative to nontargeted lipofectamine controls. The best transfection performance was observed using 10 mol % Mannose-PEG3000-DSPE, 60 mol % BCAT, and 30 mol % DOPE, indicating that the most efficient delivery into DCs occurs via synergistic interaction between mannose targeting and acid-labile, fusogenic BCAT/DOPE formulations. Our data suggest that mannose-PEG3000-DSPE/BCAT/DOPE formulations may be effective gene delivery vehicles for the development of DC-based vaccines.

Ultrasound-mediated destabilization and drug release from liposomes comprising dioleoylphosphatidylethanolamine

Novel sonosensitive doxorubicin-containing liposomes comprising dioleoylphosphatidylethanolamine (DOPE) as the main lipid constituent were developed and characterized in terms of ultrasound-mediated drug release in vitro. The liposome formulation showed high sonosensitivity; where approximately 95% doxorubicin was released from liposomes after 6min of 40kHz US exposure in buffered sucrose solution. This represented a 30% increase in release extent in absolute terms compared to liposomes comprising the saturated lipid analogue distearoylphosphatidylethanolamine (DSPE), and a 9-fold improvement in release extent when compared to standard pegylated liposomal doxorubicin, respectively. Ultrasound release experiments in the presence of serum showed a significantly reduction in sonosensitivity of DSPE-based liposomes, whilst the release properties of DOPE-based liposomes were essentially maintained. Dynamic light scattering measurements and cryo-transmission electron microscopy of DOPE-based liposomes after ultrasound treatment indicated liposome disruption and formation of various lipid structures, corroborating the high release extent. The results point to the potential of DOPE-based liposomes as a new class of drug carriers for ultrasound-mediated drug delivery.

Long-circulating, pH-sensitive liposomes

A major limiting factor for the wide application of pH-sensitive liposomes is their recognition and sequestration by the phagocytes of the reticulo-endothelial system, which conditions a very short circulation half-life. Typically prolonged circulation of liposomes is achieved by grafting their membranes with pegylated phospholipids (PEG-lipids), which have been shown, however, to deteriorate membrane integrity on one hand and to hamper the pH-responsiveness on the other. Hence, the need for novel alternative surface modifying agents to ensure effective half-life prolongation of pH-sensitive liposomes is a subject of intensive research. A series of copolymers having short blocks of lipid-mimetic units has been shown to sterically stabilize conventional liposomes based on different phospholipids. This has prompted us to broaden their utilization to pH-sensitive liposomes, too. The present contribution gives thorough account on the chemical synthesis of these copolymers their incorporation in DOPE:CHEMs pH-sensitive liposomes and detailed explanation on the battery of techniques for the biopharmaceutical characterization of the prepared formulations in terms of pH-responsiveness, cellular internalization, in vivo pharmacokinetics and biodistribution.

Observing self-assembled lipid nanoparticles building order and complexity through low-energy transformation processes

Future nanoscale soft matter design will be driven by the biological paradigms of hierarchical self-assembly and long-lived nonequilibrium states. To reproducibly control the low-energy self-assembly of nanomaterials for the future, we must first learn the lessons of biology. Many cellular organelles exhibit highly ordered cubic membrane structures. Determining the mechanistic origins of such lipid organelle complexity has been elusive. We report the first observation of the complete sequence of major transformations in the conversion from a 1D lamellar membrane to 3D inverse bicontinuous cubic nanostructure. Characterization was enabled by adding a steric stabilizer to dispersions of lipid nanoparticles which increased the lifetime of very short-lived nonequilibrium intermediate structures. By using synchrotron small-angle X-ray scattering and cryo-transmission electron microscopy we observed and characterized initial lipid bilayer contacts and stalk formation, followed by membrane pore development, pore evolution into 2D hexagonally packed lattices, and finally creation of 3D bicontinuous cubic structures.

Magnesium-induced lipid bilayer microdomain reorganizations: implications for membrane fusion

Interactions between dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylserine (DPPS), combined both as binary lipid bilayer assemblies and separately, under the influence of divalent Mg2+, a membrane bilayer fusogenic agent, are reported. Infrared vibrational spectroscopic analyses of the lipid acyl chain methylene symmetric stretching modes indicate that aggregates of the two phospholipid components exist as domains heterogeneously distributed throughout the binary bilayer system. In the presence of Mg2+, DPPS maintains an ordered orthorhombic subcell gel phase structure through the phase transition temperature, while the DPPC component is only minimally perturbed with respect to the gel to liquid crystalline phase change. The addition of Mg2+ induces a reorganization of the lipid domains in which the gel phase acyl chain planes rearrange from a hexagonal configuration toward a triclinic, parallel chain subcell. Examination of the acyl chain methylene deformation modes at low temperatures allows a determination of DPPS microdomain sizes, which decrease upon the addition of DPPC-d62 in the absence of Mg2+. On adding Mg2+, a uniform DPPS domain size is observed in the binary mixtures. In either the presence or absence of Mg2+, DPPC-d62 aggregates remain in a configuration for which microdomain sizes are not spectroscopically measurable. Analysis of the acyl chain methylene deformation modes for DPPC-d62 in the binary system suggests that clusters of the deuterated lipids are distributed throughout the DPPS matrix. Light scattering and fluorescence measurements indicate that Mg2+ induces both the aggregation and the fusion of the lipid assemblies as a function of the ratio of DPPS to DPPC. The structural reorganizations of the lipid microdomains within the DPPS-DPPC bilayer are interpreted in the context of current concepts regarding lipid bilayer fusion.

Solubilization of hydrophobic guest molecules in the monoolein discontinuous QL cubic mesophase and its soft nanoparticles

Hydrophobic bioactive guest molecules were solubilized in the discontinuous cubic mesophase (QL) of monoolein. Their effects on the mesophase structure and thermal behavior, and on the formation of soft nanoparticles upon dispersion of the bulk mesophase were studied. Four additives were analyzed. They were classified into two types based on their presumed location within the lipid bilayer and their influence on the phase behavior and structure. Differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), polarized light microscopy, cryogenic-transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS) were used for the analysis. We found that carbamazepine and cholesterol (type I molecules) likely localize in the hydrophobic domains, but close to the hydrophobic-hydrophilic region. They induce strong perturbation to the mesophase packing by influencing both the order of the lipid acyl chains and interactions between lipid headgroups. This results in significant reduction of the phase transition enthalpy, and phase separation into lamellar and cubic mesophases above the maximum loading capacity. The inclusion of type I molecules in the mesophase also prevents the formation of soft nanoparticles with long-range internal order upon dispersion. In their presence, only vesicles or sponge-like nanoparticles form. Phytosterols and coenzyme Q10 (type II molecules) present only moderate effects. These molecules reside in the hydrophobic domains, where they cannot alter the lipid curvature or transform the QL mesophase into another phase. Therefore, above maximum loading, excess solubilizate precipitates in crystal forms. Moreover, when type II-loaded QL is dispersed, nanoparticles with long-range order and cubic symmetry (i.e., cubosomes) do form. A model for the growth of the ordered nanoparticles was developed from a series of intermediate structures identified by cryo-TEM. It proposes the development of the internal structure by fusion events between bilayer segments.

Polyelectrolyte-coated liposomes: stabilization of the interfacial complexes

Anionic liposomes, composed of egg lecithin (EL) or dipalmitoylphosphatidylcholine (DPPC) with 20 mol% of cardiolipin (CL(2-)), were mixed with cationic polymers, poly(4-vinylpyridine) fully quaternized with ethyl bromide (P2) or poly-L-lysine (PL). Polymer/liposome binding studies were carried out using electrophoretic mobility (EPM), fluorescence, and conductometry as the main analytical tools. Binding was also examined in the presence of added salt and polyacrylic acid (PAA). The following generalizations arose from the experiments: (a) Binding of P2 and PL to small EL/CL(2-) liposomes (60-80 nm in diameter) is electrostatic in nature and completely reversed by addition of salt or PAA. (b) Binding can be enhanced by hydrophobization of the polymer with cetyl groups. (c) Binding can also be enhanced by changing the phase state of the lipid bilayer from liquid to solid (i.e. going from EL to DPPC) or by increasing the size of the liposomes (i.e. going from 60-80 to 300 nm). By far the most promising systems, from the point of view of constructing polyelectrolyte multilayers on liposome cores without disruption of liposome integrity, involve small, liquid, anionic liposomes coated initially with polycations carrying pendant alkyl groups.

Metal cation induced cubic phase in poly(ethylene glycol)-functionalized dioleoylphosphatidylethanolamine aqueous dispersions

Metal cations (Mn(2+) or Ca(2+)) in aqueous dispersions of mixtures of dioleoylphosphatidylethanolamine (DOPE) and poly(ethylene glycol)-functionalized DOPE (DOPE-PEG(350)) induce, above a certain amount of the PEG lipid component, a phase transition from the inverted hexagonal phase H(II) to the bicontinuous inverted cubic phase Q(224) with space group Pn3m. The process is driven by the decrease of free elastic energy due to the Gaussian curvature of the cubic phase. The structural characterization of the phase behavior over the whole explored range of DOPE-PEG/DOPE weight ratio (3-25%) is reported, focusing on the role of the metal cation in the formation of the 3D cubic lattice. This result may represent a significant progress toward a design-based approach to drug delivery.

On the formation of discoidal versus threadlike micelles in dilute aqueous surfactant/lipid systems

In a recent study, we showed that the surfactant 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000 (DSPE-PEG2000) induced mixed micelles of either threadlike or discoidal shape when mixed with different types of lipids. In this study, we have exchanged the PEG-lipid for the more conventional surfactants octaethylene glycol monododecyl ether (C12E8), hexadecyltrimethylammonium bromide (CTAB), and sodium dodecyl sulfate (SDS). Cryo-TEM investigations show that also these surfactants are able to induce the formation of long-lived discoidal micelles. Generally, the preference for either discoidal or threadlike micelles can be tuned by the choice of lipids and environmental conditions in much the same way as observed for the lipid/PEG-lipid system. Our investigation showed, furthermore, that the choice of surfactant may influence the type of mixed micelles formed. It is argued that the formation of discoidal rather than threadlike micelles may be rationalized as an effect of increasing bending rigidity. Our detailed theoretical model calculations show that the bending rigidity becomes significantly raised for aggregates formed by an ionic rather than a nonionic surfactant.

Long-circulating, pH-sensitive liposomes sterically stabilized by copolymers bearing short blocks of lipid-mimetic units

A major hurdle towards in vivo utilization of pH-sensitive liposomes is their prompt sequestration by reticuloendothelial system and hence short circulation time. Prolonged circulation of liposomes is usually achieved by incorporation of pegylated lipids, which have been frequently reported to deteriorate the acid-triggered release. In this study we evaluate the ability of four novel nonionic copolymers, bearing short blocks of lipid-mimetic units to provide steric stabilization of DOPE:CHEMs liposomes. The vesicles were prepared using the lipid film hydration method and extrusion, yielding liposomes of 120-160 nm in size. Their pH-sensitivity was monitored via the release of encapsulated calcein. The incorporation of the block copolymers at concentration up to 10 mol% did not deteriorate the pH-sensitivity of the liposomes. A selected formulation was tested for stability in presence of 25% human plasma and proved to significantly outclass the plain DOPE:CHEMs liposomes. The ability of calcein-loaded liposomes to deliver their cargo inside EJ cells was investigated using fluorescent microscopy and the results show that the surface-modified vesicles are as effective to ensure intracellular delivery as plain liposomes. The pharmacokinetics and organ distribution of a selected formulation, containing a copolymer bearing four lipid anchors was investigated in comparison to plain liposomes and PEG (2000)-DSPE stabilized liposomes. The juxtaposition of the blood clearance curves and the calculated pharmacokinetic parameters show that the block copolymer confers superior longevity in vivo. The block copolymers utilized in this study can be consider as promising sterically stabilizing agents for pH-sensitive liposomes.

Effects of poly (ethylene glycol) chains conformational transition on the properties of mixed DMPC/DMPE-PEG thin liquid films and monolayers

Foam thin liquid films (TLF) and monolayers at the air-water interface formed by DMPC mixed with DMPE-bonded poly (ethylene glycol)s (DMPE-PEG(550), DMPE-PEG(2000) and DMPE-PEG(5000)) were obtained. The influence of both (i) PEG chain size (evaluated in terms of Mw) and mushroom-to-brush conformational transition and (ii) of the liposome/micelle ratio in the film-forming dispersions, on the interfacial properties of mixed DMPC/DMPE-PEG films was compared. Foam film studies demonstrated that DMPE-PEG addition to foam TLFs caused (i) delayed kinetics of film thinning and black spot expansion and (ii) film stabilization. At the mushroom-to-brush transition, due to steric repulsion increased DMPE-PEG films thickness reached 25 nm while pure DMPC films were only 8 nm thick Newton black films. It was possible to differentiate DMPE-PEG(2000/5000) from DMPE-PEG(550) by the ability to change foam TLF formation mechanism, which could be of great importance for "stealth" liposome design. Monolayer studies showed improved formation kinetics and equilibrium surface tension decrease for DMPE-PEG monolayers compared with DMPC pure films. SEM observations revealed "smoothing" and "sealing" of the defects in the solid-supported layer surface by DMPE-PEGs adsorption, which could explain DMPE-PEGs ability to stabilize TLFs and to decrease monolayer surface tension. All effects in monolayers, foam TLFs and solid-supported layers increased with the increase of PEG Mw and DMPE-PEG concentration. However, at the critical DMPE-PEG concentration (where mushroom-to-brush conformational transition occurred) maximal magnitude of the effects was reached, which only slightly changed at further DMPE-PEG content and micelle/liposome ratio increase.

Structure of mixed micelles formed in PEG-lipid/lipid dispersions

Polyethylene glycol (PEG)-conjugated lipids are commonly employed for steric stabilization of liposomes. When added in high concentrations PEG-lipids induce formation of mixed micelles, and depending on the lipid composition of the sample, these may adapt either a discoidal or a long threadlike shape. The factors governing the type of micellar aggregate formed have so far not been investigated in detail. In this study we have systematically varied the lipid composition in lipid/PEG-lipid mixtures and characterized the aggregate structure by means of cryo-transmission electron microscopy (cryo-TEM). The effects caused by adding sterols, phosphatidylethanolamines, and phospholipids with saturated acyl chains to egg phosphatidylcholine/1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000 (EPC/DSPE-PEG2000) mixtures with a fixed amount (25 mol %) of DSPE-PEG2000 was studied. Further, the aggregate structure in 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine/1,2-dimyristoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000] (DMPC/DMPE-PEG2000) samples above and below the gel to liquid crystalline phase transition temperature (TC) was investigated. Our results revealed that lipid components, as well as environmental conditions, that reduce the lipid spontaneous curvature and increase the monolayer bending modulus tend to promote formation of discoidal micelles. At temperatures below the gel-to-liquid crystalline phase transition temperature reduced lipid/PEG-lipid miscibility, furthermore, likely contribute to the observed formation of discoidal rather than threadlike micelles.

Thermal phase behavior of DMPG: the exclusion of continuous network and dense aggregates

1,2-Dimyristoyl-sn-glycero-3-phospho-rac-glycerol has been suggested to form at intermediate temperatures and at high concentrations in low-salt solutions as a continuous sponge phase (Heimburg, T.; Biltonen, R. L. Biochemistry 1994, 33, 9477-9488). In the present study, the changes in signals seen for a range of fluorescent probes during phase transformations of this phospholipid indicate continuous melting and a change in lipid packing, in accordance with previous reports. However, in accordance with Lamy-Freund and Riske (Lamy-Freund, M. T.; Riske, K. A. Chem. Phys. Lipids 2003, 122, 19-32), no enhancement of lipid mixing within the putative sponge phase region was seen, suggesting a lack of a connected lipid surface. Accordingly, a typical sponge phase cannot account for the properties of the intermediate phase. The low scattering intensities of the latter have also been taken as evidence for disaggregation. While dynamic light scattering and data for membranes containing poly(ethylene glycol)-ylated lipids could lend credence to disaggregation, the most likely explanation for the scattering data would appear to be a shape transition without significant changes in neither vesicle aggregation nor bilayer connectivity. An abrupt change in light scattering and signals from some of the fluorescent probes used reveals a new transition at Tt approximately 43 degrees C, with the formation of a more ordered interface.

Applications of phospholipid bilayer nanodiscs in the study of membranes and membrane proteins

Phospholipid bilayer Nanodiscs are novel model membranes derived from high-density lipoprotein particles and have proven to be useful in studies of membrane proteins. Membrane protein enzymology has been hampered by the inherent insolubility of membrane proteins in aqueous environments and has necessitated the use of model membranes such as liposomes and detergent-stabilized micelles. Current model membranes display a polydisperse particle size distribution and can suffer from problems of inconsistency and instability. It is also unclear how well they mimic biological lipid bilayers. In contrast, Nanodiscs, the particle size of which is constrained by a coat of scaffold proteins, are relatively monodisperse, stable model membranes with a "nativelike" lipid bilayer. Nanodiscs have already been used to study a variety of membrane proteins, including cytochrome P450s, seven-transmembrane proteins, and bacterial chemoreceptors. These proteins are simultaneously monomerized, solubilized, and incorporated into the well-defined membrane environment provided by Nanodiscs. Nanodiscs may also provide useful insights into the thermodynamics and biophysics of biological membranes and binding of small molecules to membranes.

Gene delivery by cationic lipid vectors: overcoming cellular barriers

Non-viral vectors such as cationic lipids are capable of delivering nucleic acids, including genes, siRNA or antisense RNA into cells, thus potentially resulting in their functional expression. These vectors are considered as an attractive alternative for virus-based delivery systems, which may suffer from immunological and mutational hazards. However, the efficiency of cationic-mediated gene delivery, although often sufficient for cell biological purposes, runs seriously short from a therapeutics point of view, as realizing this objective requires a higher level of transfection than attained thus far. To develop strategies for improvement, there is not so much a need for novel delivery systems. Rather, better insight is needed into the mechanism of delivery, including lipoplex-cell surface interaction, route of internalization and concomitant escape of DNA/RNA into the cytosol, and transport into the nucleus. Current work indicates that a major obstacle involves the relative inefficient destabilization of membrane-bounded compartments in which lipoplexes reside after their internalization by the cell. Such an activity requires the capacity of lipoplexes of undergoing polymorphic transitions such as a membrane destabilizing hexagonal phase, while cellular components may aid in this process. A consequence of the latter notion is that for development of a novel generation of delivery devices, entry pathways have to be triggered by specific targeting to select delivery into intracellular compartments which are most susceptible to lipoplex-induced destabilization, thereby allowing the most efficient release of DNA, a minimal requirement for optimizing non-viral vector-mediated transfection.

Membrane-protein stability in a phospholipid-based crystallization medium

Protein stability is a crucial factor to consider when attempting to crystallize integral membrane proteins. Cubic phase, or in meso, lipid-bilayer crystallization media are thought to provide native-like environments that should facilitate membrane protein crystallization by helping to stabilize the native protein conformation for the duration of the crystallization process. While excellent crystals of bacteriorhodopsin (bR) and other Halobacterial rhodopsins have been obtained in lipid-bilayer gels formed with monoglycerides, success remains elusive in the general application of such media to other membrane proteins. Additionally, we have noted that some mutants of bR are highly unstable in gels formed with monoolein. Phosphatidylethanolamines (PE) and derivatives of PE represent another class of lipids that can form connected-bilayer gels. When wildtype bR and a labile bR mutant were reconstituted into this phospholipid gel, spectroscopy showed that the protein is both more stable and has improved conformational homogeneity as compared to gels formed using monoolein. In addition, we demonstrate that well-diffracting crystals of bR can be grown from a PE-based crystallization medium. Since most proteins lack a stability-indicating chromophore and other structure-based analytical techniques are poorly compatible with the lipid gel, we developed a generally-applicable spectroscopic technique based on the intrinsic fluorescence of tryptophan residues. This fluorescence assay makes possible the rapid evaluation of lipid gels as media for the crystallization of membrane proteins.

Cryo-TEM investigation of phase behaviour and aggregate structure in dilute dispersions of monoolein and oleic acid

Cryo-transmission electron microscopy (cryo-TEM) was used to image the microstructure in dilute sonicated dispersions of monoolein and oleic acid. The aim of the study was to explore how different experimental parameters, such as sample composition, total lipid concentration, pH, and ageing affect the phase behaviour and aggregate structure. Our investigations show that a rich variety of lamellar and non-lamellar structures, including liposomes and particles of cubic and inverted hexagonal phase, may form depending on the experimental conditions. The results are analyzed and discussed in relation to existing phase diagrams and earlier investigations concerning phase- and structural behaviour in monoolein/oleic acid/water systems.

Thin liquid films and monolayers of DMPC mixed with PEG and phospholipid linked PEG

In this work thin liquid films (TLFs) and monolayers at the air/water interface formed by dimyristoylphosphatidylcholine (DMPC) and by DMPC mixed with poly ethylene glycols (PEGs) and dimyristoylphosphatidylethanolamine (DMPE) linked PEGs were studied. Film forming dispersions were composed of two types of particles: liposomes and micelles. TLFs stability, threshold concentration C(t) (i.e., the minimum one for stable film formation), and hydrodynamic behavior were measured. At equivalent conditions, DMPC films were Newton black films (real bilayers), while DMPE-PEGs films were much thicker with free water between the monolayers. DMPE-PEG addition to DMPC films caused both C(t) decrease (depending on PEG moiety length and Mw) and change of TLF formation mechanism. TLFs' hydrodynamic behavior also strongly depended on DMPE-PEG content and Mw. It was observed that thinning of the DMPC and DMPE-PEGs films continued to different film types and thickness, being much thicker for the latter films. Addition of free PEGs (PEG-200/6000) did not alter TLF type or stability, but changed TLF thinning time, confirming that free PEGs with Mw<8000 could not penetrate in the membrane and alter "near-membrane" water layer viscosity. Monolayer studies showed improved formation kinetics of both adsorbed and spread films, decrease of surface tension (equilibrium and dynamic), and of film compression/decompression histeresis area in DMPE-PEGs monolayers compared with DMPC pure films. Our study shows that combining the models of phospholipid TLFs and monolayers provide the opportunity to investigate the properties of membrane surface and to clarify some mechanisms of its interactions with membrane-active agents.

Influence of the long-chain/short-chain amphiphile ratio on lateral diffusion of PEG-lipid in magnetically aligned lipid bilayers as measured via pulsed-field-gradient NMR

Lateral diffusion measurements of polyethylene glycol(PEG)-lipid incorporated into magnetically aligned lipid bilayers, composed of dimyristoyl phosphatidylcholine (DMPC) plus dihexanoyl phosphatidylcholine (DHPC) plus 1 mol % (relative to DMPC) dimyristoyl phosphatidylethanolamine-n-[methoxy(polyethylene glycol)-2000] (DMPE-PEG 2000), were performed using stimulated-echo pulsed-field-gradient proton ((1)H) nuclear magnetic resonance spectroscopy. The DMPE-PEG 2000 (1 mol %, 35 degrees C) lateral diffusion coefficient D varied directly with the mole fraction of DMPC, X(DMPC) = q/(1+q) where q = DMPC/DHPC molar ratio, decreasing progressively from D = 1.65 x 10(-11) m(2) s(-1) at q approximately 4.7 to D = 0.65 x 10(-11) m(2) s(-1) at q approximately 2.5. Possible sources of this dependence, including orientational disorder, obstruction, and PEG-lipid sequestration, were simulated using, respectively, a diffusion-in-a-cone model, percolation theory, and a two-phase PEG distribution model. Orientational disorder alone was not capable of reproducing the observations, but in combination with either obstruction or PEG-lipid two-phase distribution models did so satisfactorily. A combination of all three models yielded the most reasonable fit to the observed dependence of lateral diffusion on q. These same effects would be expected to influence lateral diffusion of any bilayer-associating species in such systems.

Effective intracellular delivery of oligonucleotides in order to make sense of antisense

For more than two decades, antisense oligonucleotides (ODNs) have been used to modulate gene expression for the purpose of applications in cell biology and for development of novel sophisticated medical therapeutics. Conceptually, the antisense approach represents an elegant strategy, involving the targeting to and association of an ODN sequence with a specific mRNA via base-pairing, resulting in an impairment of functional and/or harmful protein expression in normal and diseased cells/tissue, respectively. Apart from ODN stability, its efficiency very much depends on intracellular delivery and release/access to the target side, issues that are still relatively poorly understood. Since free ODNs enter cells relatively poorly, appropriate carriers, often composed of polymers and cationic lipids, have been developed. Such carriers allow efficient delivery of ODNs into cells in vitro, and the mechanisms of delivery, both in terms of biophysical requirements for the carrier and cell biological features of uptake, are gradually becoming apparent. To become effective, ODNs require delivery into the nucleus, which necessitates release of internalized ODNs from endosomal compartments, an event that seems to depend on the nature of the delivery vehicle and distinct structural shape changes. Interestingly, evidence is accumulating which suggests that by modulating the surface properties of the carrier, the kinetics of such changes can be controlled, thus providing possibilities for programmable release of the carrier contents. Here, consideration will also be given to antisense design and chemistry, and the challenge of extra- and intracellular barriers to be overcome in the delivery process.