Cooperative setting for long-range linkage of Ca(2+) binding and ATP synthesis in the Ca(2+) ATPase

Deciphering the Mechanism of Inhibition of SERCA1a by Sarcolipin Using Molecular Simulations

SERCA1a is an ATPase calcium pump that transports Ca²⁺ from the cytoplasm to the sarco/endoplasmic reticulum lumen. Sarcolipin (SLN), a transmembrane peptide, regulates the activity of SERCA1a by decreasing its Ca²⁺ transport rate, but its mechanism of action is still not well-understood. To decipher this mechanism, we have performed normal mode analysis in the all-atom model, with the SERCA1a-SLN complex, or the isolated SERCA1a, embedded in an explicit membrane. The comparison of the results allowed us to provide an explanation at the atomic level for the action of SLN that is in good agreement with experimental observations. In our analyses, the presence of SLN locally perturbs the TM6 transmembrane helix and as a consequence modifies the position of D800, one of the key metal-chelating residues. Additionally, it reduces the flexibility of the gating residues, V304, and E309 in TM4, at the entrance of the Ca²⁺ binding sites, which would decrease the affinity for Ca²⁺. Unexpectedly, SLN has also an effect on the ATP binding site more than 35 Å away, due to the straightening of TM5, a long helix considered as the spine of the protein. The straightening of TM5 modifies the structure of the P-N linker that sits above it, and which comprises the ³⁵¹DKTG³⁵⁴ conserved motif, resulting in an increase of the distance between ATP and the phosphorylation site. As a consequence, the turn-over rate could be affected. All this gives SERCA1a the propensity to go toward a Ca²⁺ low-affinity E2-like state in the presence of SLN and toward a Ca²⁺ high-affinity E1-like state in the absence of SLN. In addition to a general mechanism of inhibition of SERCA1a regulatory peptides, this study also provides an insight into the conformational transition between the E2 and E1 states.

Thermodynamics of Cation Binding to the Sarcoendoplasmic Reticulum Calcium ATPase Pump and Impacts on Enzyme Function

Sarcoendoplasmic reticulum Ca²⁺-ATPase (SERCA) is a transmembrane pump that plays an important role in transporting calcium into the sarcoplasmic reticulum (SR). While calcium (Ca²⁺) binds SERCA with micromolar affinity, magnesium (Mg²⁺) and potassium (K⁺) also compete with Ca²⁺ binding. However, the molecular bases for these competing ions' influence on the SERCA function and the selectivity of the pump for Ca²⁺ are not well-established. We therefore used in silico methods to resolve molecular determinants of cation binding in the canonical site I and II Ca²⁺ binding sites via (1) triplicate molecular dynamics (MD) simulations of Mg²⁺, Ca²⁺, and K⁺-bound SERCA, (2) mean spherical approximation (MSA) theory to score the affinity and selectivity of cation binding to the MD-resolved structures, and (3) state models of SERCA turnover informed from MSA-derived affinity data. Our key findings are that (a) coordination at sites I and II is optimized for Ca²⁺ and to a lesser extent for Mg²⁺ and K⁺, as determined by MD-derived cation-amino acid oxygen and bound water configurations, (b) the impaired coordination and high desolvation cost for Mg²⁺ precludes favorable Mg²⁺ binding relative to Ca²⁺, while K⁺ has limited capacity to bind site I, and (c) Mg²⁺ most likely acts as inhibitor and K⁺ as intermediate in SERCA's reaction cycle, based on a best-fit state model of SERCA turnover. These findings provide a quantitative basis for SERCA function that leverages molecular-scale thermodynamic data and rationalizes enzyme activity across broad ranges of K⁺, Ca²⁺, and Mg²⁺ concentrations.

Conformational Transitions and Alternating-Access Mechanism in the Sarcoplasmic Reticulum Calcium Pump

Ion pumps are integral membrane proteins responsible for transporting ions against concentration gradients across biological membranes. Sarco/endoplasmic reticulum Ca2+-ATPase (SERCA), a member of the P-type ATPases family, transports two calcium ions per hydrolyzed ATP molecule via an "alternating-access" mechanism. High-resolution crystallographic structures provide invaluable insight on the structural mechanism of the ion pumping process. However, to understand the molecular details of how ATP hydrolysis is coupled to calcium transport, it is necessary to gain knowledge about the conformational transition pathways connecting the crystallographically resolved conformations. Large-scale transitions in SERCA occur at time-scales beyond the current reach of unbiased molecular dynamics simulations. Here, we overcome this challenge by employing the string method, which represents a transition pathway as a chainofstates linking two conformational endpoints. Using a multiscale methodology, we have determined all-atom transition pathways for three main conformational transitions responsible for the alternating-access mechanism. The present pathways provide a clear chronology and ordering of the key events underlying the active transport of calcium ions by SERCA. Important conclusions are that the conformational transition that leads to occlusion with bound ATP and calcium is highly concerted and cooperative, the phosphorylation of Asp351 causes areorganization of the cytoplasmic domains that subsequently drives the opening of the luminal gate, and thereclosing of luminal gate induces a shift in the cytoplasmic domains that subsequently enables the dephosphorylation of Asp351-P. Formation of transient residue-residue contacts along the conformational transitions predicted by the computations provide an experimental route to test the general validity of the computational pathways.

SERCA mutant E309Q binds two Ca(2+) ions but adopts a catalytically incompetent conformation

The sarco(endo)plasmic reticulum Ca(2+)-ATPase (SERCA) couples ATP hydrolysis to transport of Ca(2+). This directed energy transfer requires cross-talk between the two Ca(2+) sites and the phosphorylation site over 50 Å distance. We have addressed the mechano-structural basis for this intramolecular signal by analysing the structure and the functional properties of SERCA mutant E309Q. Glu(309) contributes to Ca(2+) coordination at site II, and a consensus has been that E309Q only binds Ca(2+) at site I. The crystal structure of E309Q in the presence of Ca(2+) and an ATP analogue, however, reveals two occupied Ca(2+) sites of a non-catalytic Ca2E1 state. Ca(2+) is bound with micromolar affinity by both Ca(2+) sites in E309Q, but without cooperativity. The Ca(2+)-bound mutant does phosphorylate from ATP, but at a very low maximal rate. Phosphorylation depends on the correct positioning of the A-domain, requiring a shift of transmembrane segment M1 into an 'up and kinked position'. This transition is impaired in the E309Q mutant, most likely due to a lack of charge neutralization and altered hydrogen binding capacities at Ca(2+) site II.

On allosteric modulation of P-type Cu(+)-ATPases

P-type ATPases perform active transport of various compounds across biological membranes and are crucial for ion homeostasis and the asymmetric composition of lipid bilayers. Although their functional cycle share principles of phosphoenzyme intermediates, P-type ATPases also show subclass-specific sequence motifs and structural elements that are linked to transport specificity and mechanistic modulation. Here we provide an overview of the Cu(+)-transporting ATPases (of subclass PIB) and compare them to the well-studied sarco(endo)plasmic reticulum Ca(2+)-ATPase (of subclass PIIA). Cu(+) ions in the cell are delivered by soluble chaperones to Cu(+)-ATPases, which expose a putative "docking platform" at the intracellular interface. Cu(+)-ATPases also contain heavy-metal binding domains providing a basis for allosteric control of pump activity. Database analysis of Cu(+) ligating residues questions a two-site model of intramembranous Cu(+) binding, and we suggest an alternative role for the proposed second site in copper translocation and proton exchange. The class-specific features demonstrate that topological diversity in P-type ATPases may tune a general energy coupling scheme to the translocation of compounds with remarkably different properties.

Cellular mechanisms underlying nitric oxide-induced vasodilation of descending vasa recta

It has been observed that vasoactivity of explanted descending vasa recta (DVR) is modulated by intrinsic nitric oxide (NO) and superoxide (O(2)(-)) production (Cao C, Edwards A, Sendeski M, Lee-Kwon W, Cui L, Cai CY, Patzak A, Pallone TL. Am J Physiol Renal Physiol 299: F1056-F1064, 2010). To elucidate the cellular mechanisms by which NO, O(2)(-) and hydrogen peroxide (H(2)O(2)) modulate DVR pericyte cytosolic Ca(2+) concentration ([Ca](cyt)) and vasoactivity, we expanded our mathematical model of Ca(2+) signaling in pericytes. We incorporated simulations of the pathways that translate an increase in [Ca](cyt) to the activation of myosin light chain (MLC) kinase and cell contraction, as well as the kinetics of NO and reactive oxygen species formation and their effects on [Ca](cyt) and MLC phosphorylation. The model reproduced experimentally observed trends of DVR vasoactivity that accompany exposure to N(ω)-nitro-L-arginine methyl ester, 8-Br-cGMP, Tempol, and H(2)O(2). Our results suggest that under resting conditions, NO-induced activation of cGMP maintains low levels of [Ca](cyt) and MLC phosphorylation to minimize basal tone. This results from stimulation of Ca(2+) uptake from the cytosol into the SR via SERCA pumps, Ca(2+) efflux into the extracellular space via plasma membrane Ca(2+) pumps, and MLC phosphatase (MLCP) activity. We predict that basal concentrations of O(2)(-) and H(2)O(2) have negligible effects on Ca(2+) signaling and MLC phosphorylation. At concentrations above 1 nM, O(2)(-) is predicted to modulate [Ca(cyt)] and MCLP activity mostly by reducing NO bioavailability. The DVR vasoconstriction that is induced by high concentrations of H(2)O(2) can be explained by H(2)O(2)-mediated downregulation of MLCP and SERCA activity. We conclude that intrinsic generation of NO by the DVR wall may be sufficient to inhibit vasoconstriction by maintaining suppression of MLC phosphorylation.

The role of the Ca2+ binding ligand Asn879 in the function of the plasma membrane Ca2+ pump

Asn879 in the transmembrane segment M6 of the plasma membrane Ca(2+) pump (PMCA human isoform 4xb) has been proposed to coordinate Ca(2+) at the transport site through its carboxylate. This idea agrees with the fact that this Asn is conserved in other Ca(2+)-ATPases but is replaced by Asp, Glu, and other residues in closely related 2P-type ATPases of different ionic specificity. Previous mutagenesis studies have shown that the substitution of Ala for Asn abolishes the activity of the enzyme (Adebayo et al., 1995; Guerini et al., 1996). We have constructed a mutant PMCA in which the Asn879 was substituted by Asp. The mutant protein was expressed in Saccharomyces cerevisiae, solubilized and purified by calmodulin affinity chromatography. The Asn879Asp PMCA mutant exhibited about 30% of the wild type Ca(2+)-dependent ATPase activity and only a minor reduction of the apparent affinity for Ca(2+). The decrease in the Ca(2+)-ATPase of the mutant enzyme was in parallel with the reduction in the amount of phosphoenzyme formed from Ca(2+) plus ATP. Noteworthy, the mutation nearly eliminated the ability of the enzyme to hydrolyze pNPP which is maximal in the absence of Ca(2+) revealing a major effect of the mutation on the Ca(2+)-independent reactions of the transport cycle. At a pH low enough to protonate the Asp carboxylate the pNPPase activity of Asn879Asp increased, suggesting that the binding of protons to Asn879 is essential for the activities catalyzed by E(2)-like forms of the enzyme.

High-yield heterologous expression of wild type and mutant Ca(2+) ATPase: Characterization of Ca(2+) binding sites by charge transfer

High-yield heterologous SERCA1 (Ca(2+) ATPase) expression was obtained in COS-1 cells infected with recombinant adenovirus vector (rAdSERCA). Higher transcription and expression were obtained in the presence of a His(6) tag at the amino terminus, as compared with a His(6) tag at the carboxyl SERCA terminus, or no tag. The expressed protein was targeted extensively to intracellular membranes. Optimal yield of functional Ca(2+) ATPase corresponded to 10% of total protein, with phosphoenzyme levels, catalytic turnover and Ca(2+) transport identical with those of native SERCA1. This recombinant membrane-bound (detergent-free) enzyme was used for characterization of Ca(2+) binding at the two specific transmembrane sites (ATP-free) by measurements of net charge transfer upon Ca(2+) binding to the protein, yielding cooperative isotherms (K(1)=5.9+/-0.5x10(5) M(-1) and K(2)=5.7+/-0.3x10(6) M(-1)). Non-cooperative binding of only one Ca(2+), and loss of ATPase activation, were observed following E309 mutation at site II. On the other hand, as a consequence of the site II mutation, the affinity of site I for Ca(2+) was increased (K=4.4+/-0.2x10(6) M(-1)). This change was due to a pK(a) shift of site I acidic residues, and to contributions of oxygen functions from empty site II to Ca(2+) binding at site I. No charge movement was observed following E771Q mutation at site I, indicating no Ca(2+) binding to either site. Therefore, calcium occupancy of site I is required to trigger cooperative binding to site II and catalytic activation. In the presence of millimolar Mg(2+), the charge movement upon addition of Ca(2+) to WT ATPase was reduced by 50%, while it was reduced by 90% when Ca(2+) was added to the E309Q/A mutants, demonstrating that competitive Mg(2+) binding can occur at site I but not at site II.

Specificity of ligand binding to transport sites: Ca2+ binding to the Ca2+ transport ATPase and its dependence on H+ and Mg2+

Ligand binding to transport sites constitutes the initial step in the catalytic cycle of transport ATPases. Here, we consider the well characterized Ca2+ ATPase of sarcoplasmic reticulum (SERCA) and describe a series of Ca2+ binding isotherms obtained by equilibrium measurements in the presence of various H+ and Mg2+ concentrations. We subject the isotherms to statistical mechanics analysis, using a model based on a minimal number of mechanistic steps. The analysis allows satisfactory fits and yields information on occupancy of the specific Ca2+ sites under various conditions. It also provides a fundamental method for analysis of binding specificity to transport sites under equilibrium conditions that lead to tightly coupled catalytic activation.

Mechanisms underlying angiotensin II-induced calcium oscillations

To gain insight into the mechanisms that underlie angiotensin II (ANG II)-induced cytoplasmic Ca2+ concentration ([Ca]cyt) oscillations in medullary pericytes, we expanded a prior model of ion fluxes. ANG II stimulation was simulated by doubling maximal inositol trisphosphate (IP3) production and imposing a 90% blockade of K+ channels. We investigated two configurations, one in which ryanodine receptors (RyR) and IP3 receptors (IP3R) occupy a common store and a second in which they reside on separate stores. Our results suggest that Ca2+ release from stores and import from the extracellular space are key determinants of oscillations because both raise [Ca] in subplasmalemmal spaces near RyR. When the Ca2+-induced Ca2+ release (CICR) threshold of RyR is exceeded, the ensuing Ca2+ release is limited by Ca2+ reuptake into stores and export across the plasmalemma. If sarco(endo)plasmic reticulum Ca2+-ATPase (SERCA) pumps do not remain saturated and sarcoplasmic reticulum Ca2+ stores are replenished, that phase is followed by a resumption of leak from internal stores that leads either to [Ca]cyt elevation below the CICR threshold (no oscillations) or to elevation above it (oscillations). Our model predicts that oscillations are more prone to occur when IP3R and RyR stores are separate because, in that case, Ca2+ released by RyR during CICR can enhance filling of adjacent IP3 stores to favor a high subsequent leak that generates further CICR events. Moreover, the existence or absence of oscillations depends on the set points of several parameters, so that biological variation might well explain the presence or absence of oscillations in individual pericytes.

Structural aspects of ion pumping by Ca2+-ATPase of sarcoplasmic reticulum

Ca2+-ATPase of muscle sarcoplasmic reticulum is an ATP-powered Ca2+-pump that establishes a >10,000-fold concentration gradient across the membrane. Its crystal structures have been determined for nine different states that cover nearly the entire reaction cycle. Presented here is a brief structural account of the ion pumping process, which is achieved by a series of very large domain rearrangements.

Conformational fluctuations of the Ca2+-ATPase in the native membrane environment. Effects of pH, temperature, catalytic substrates, and thapsigargin

Digestion with proteinase K or trypsin yields complementary information on conformational transitions of the Ca(2+)-ATPase (SERCA) in the native membrane environment. Distinct digestion patterns are obtained with proteinase K, revealing interconversion of E1 and E2 or E1 approximately P and E2-P states. The pH dependence of digestion patterns shows that, in the presence of Mg(2+), conversion of E2 to E1 pattern occurs (even when Ca(2+) is absent) as H(+) dissociates from acidic residues. Mutational analysis demonstrates that the Glu(309) and Glu(771) acidic residues (empty Ca(2+)-binding sites I and II) are required for stabilization of E2. Glu(309) ionization is most important to yield E1. However, a further transition produced by Ca(2+) binding to E1 (i.e. E1.2Ca(2+)) is still needed for catalytic activation. Following ATP utilization, H(+)/Ca(2+) exchange is involved in the transition from the E1 approximately P.2Ca(2+) to the E2-P pattern, whereby alkaline pH will limit this conformational transition. Complementary experiments on digestion with trypsin exhibit high temperature dependence, indicating that, in the E1 and E2 ground states, the ATPase conformation undergoes strong fluctuations related to internal protein dynamics. The fluctuations are tightly constrained by ATP binding and phosphoenzyme formation, and this constraint must be overcome by thermal activation and substrate-free energy to allow enzyme turnover. In fact, a substantial portion of ATP free energy is utilized for conformational work related to the E1 approximately P.2Ca(2+) to E2-P transition, thereby disrupting high affinity binding and allowing luminal diffusion of Ca(2+). The E2 state and luminal path closure follow removal of conformational constraint by phosphate.

Electrogenic steps of the SR Ca-ATPase enzymatic cycle and the effect of curcumin

Sarcoplasmic reticulum (SR) vesicles were adsorbed on an octadecanethiol/phosphatidylcholine mixed bilayer anchored to a gold electrode, and the Ca-ATPase contained in the vesicles was activated by ATP concentration jumps in the presence of calcium ions. The resulting capacitive current transients are compared with those calculated on the basis of the enzymatic cycle of the calcium pump. This comparison provides information on the kinetics of the E(2)-E(1) conformational change and on its pH dependence. The alteration in the current transients following ATP concentration jumps in the presence of curcumin is examined. In particular, curcumin decreases the rate of slippage of the Ca-ATPase, and at concentrations above 10 microM reduces calcium transport by this pump.

Essential role for Pro21 in phospholamban for optimal inhibition of the Ca-ATPase

We have investigated the functional role of the flexible hinge region centered near the sequence TIEMP(21), which connects the N-terminal cytosolic and C-terminal membrane-spanning helical domains of phospholamban (PLB). Specifically, we ask if the conformation of this region is important to attain optimal inhibitory interactions with the Ca-ATPase. A genetically engineered PLB mutant was constructed in which Pro(21) was mutated to an alanine (P21A-PLB(C)); in this construct, all three transmembrane cysteines were substituted with alanines to stabilize the monomeric form of PLB, and a unique cysteine was introduced at position 24 near the hinge element (A24C), permitting the site-specific attachment of fluorescein-5-maleimide (FMal) to monitor structure changes. In agreement with prior measurements in cardiac SR microsomes, the calcium concentration associated with half-maximal activation (Ca(1/2)) of the Ca-ATPase, 290 +/- 10 nM, is shifted to 580 +/- 20 nM when co-reconstituted with PLB(C) (Pro21) as a result of a reduction in the cooperativity associated with the calcium-dependent structural transition. Kinetic simulations indicate that PLB(C) association with the Ca-ATPase results in a 75% reduction in the equilibrium constant associated with the formation of the second high-affinity calcium binding site. In comparison, there is a 43% reduction in KCa(1/2) upon reconstitution of the Ca-ATPase with P21A-PLB(C), which can be simulated by decreasing the equilibrium constant associated with the calcium-dependent structural activation by 50%. The diminished inhibitory action of P21A-PLB(C) is associated with alterations in the structure of the hinge element, as evidenced by the diminished solvent accessibility of FMal relative to the native structure. Likewise, increases in the alpha-helical content and decreases in the mobility of the carboxyl-terminal domain of P21A-PLB(C) are observed using circular dichroism and fluorescence spectroscopy. Collectively, these results indicate that the overall dimensions of the carboxyl-terminal domain of PLB are increased through a stabilization of secondary structural elements upon mutation in P21A-PLB(C) that result in a reduction in the ability of the amino-terminal cytosolic portion of PLB to productively inhibit the Ca-ATPase. Further, these results suggest that the unstructured characteristics of the flexible hinge region in PLB are critical for optimal inhibitory interactions with the Ca-ATPase and suggest its role as a conformational switch.

Kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state

The time-resolved kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state was investigated by Ca(2+)-concentration jump experiments. Ca2+ was released by an ultraviolet-light flash from caged calcium, and charge movements in the membrane domain of the ion pumps were detected by the fluorescent styryl dye 2BITC. The partial reaction (H3E1 <-->) E1 <--> CaE1 <--> Ca2E1 can be characterized by two time constants, tau1 and tau2, both of which are not significantly Ca(2+)-concentration-dependent and only weakly pH-dependent at pH < 7.5. Both time constants differ by a factor of approximately 50 (4.7 vs. 200 ms). The weak substrate-dependence indicates that the rate-limiting process is not related to Ca2+ migration through the access channel and ion binding to the binding sites but to conformational rearrangements preceding the ion movements. The high activation energy obtained for both processes, 42.3 kJ mol(-1) and 60.3 kJ mol(-1) at pH 7.2, support this concept. Transient binding of Ca ions to the loop L67 and a movement of the Ca-loaded loop are discussed as a mechanism that facilitates the entrance of both Ca ions into the access channel to the ion-binding sites.

Structural basis of ion pumping by Ca2+-ATPase of the sarcoplasmic reticulum

The structures of the Ca2+-ATPase (SERCA1a) have been determined for five different states by X-ray crystallography. Detailed comparison of the structures in the Ca2+ bound form and unbound (but thapsigargin bound) form reveals that very large rearrangements of the transmembrane helices take place accompanying Ca2+ dissociation and binding and that they are mechanically linked with equally large movements of the cytoplasmic domains. The meanings of the rearrangements of the transmembrane helices and those of the cytoplasmic domains as well as the mechanistic roles of phosphorylation are now becoming clear. Furthermore, the roles of critical amino acid residues identified by extensive mutagenesis studies are becoming evident in terms of atomic structure.

Calcium activation of the Ca-ATPase enhances conformational heterogeneity between nucleotide binding and phosphorylation domains

High-resolution crystal structures obtained in two conformations of the Ca-ATPase suggest that a large-scale rigid-body domain reorientation of approximately 50 degrees involving the nucleotide-binding (N) domain is required to permit the transfer of the gamma-phosphoryl group of ATP to Asp(351) in the phosphorylation (P) domain during coupled calcium transport. However, variability observed in the orientations of the N domain relative to the P domain in the different crystal structures of the Ca-ATPase following calcium activation and the structures of other P-type ATPases suggests the presence of conformational heterogeneity in solution, which may be modulated by contact interactions within the crystal. Therefore, to address the extent of conformational heterogeneity between these domains in solution, we have used fluorescence resonance energy transfer to measure the spatial separation and conformational heterogeneity between donor (i.e., 5-[[2-[(iodoacetyl)amino]ethyl]amino]naphthalene-1-sulfonic acid) and acceptor (i.e., fluorescein 5-isothiocyanate) chromophores covalently bound to the P and N domains, respectively, within the Ca-ATPase stabilized in different enzymatic states associated with the transport cycle. In comparison to the unliganded enzyme, the spatial separation and conformational heterogeneity between these domains are unaffected by enzyme phosphorylation. However, calcium activation results in a 3.4 A increase in the average spatial separation, from 29.4 to 32.8 A, in good agreement with the 4.3 A increase in the distance estimated from high-resolution structures where these sites are respectively separated by 31.6 A (1IWO.pdb) and 35.9 A (1EUL.pdb). Thus, the crystal structures accurately reflect the average solution structures of the Ca-ATPase. These results suggest that the approximation of cytoplasmic domains accompanying calcium transport, as observed from crystal structures, occurs in solution within the context of large amplitude domain motions important for catalysis. We suggest that these domain motions enhance the rates of substrate (ATP) access and product (ADP) egress and the probability of a productive juxtaposition of the gamma-phosphoryl moiety of ATP with Asp(351) on the phosphorylation domain to facilitate enzyme phosphorylation and calcium transport.

Phospholamban binds in a compact and ordered conformation to the Ca-ATPase

Mutagenesis and cross-linking measurements have identified specific contact interactions between the cytosolic and the transmembrane sequences of phospholamban (PLB) and the Ca-ATPase, and in conjunction with the high-resolution structures of PLB and the Ca-ATPase, have been used to construct models of the PLB-ATPase complex, which suggest that PLB adopts a more extended structure within this complex. To directly test these predictions, we have used fluorescence resonance energy transfer to measure the average conformation and heterogeneity between chromophores covalently bound to the transmembrane and cytosolic domains of PLB reconstituted in proteoliposomes. In the absence of the Ca-ATPase, the cytosolic domain of PLB assumes a wide range of structures relative to the transmembrane sequence, which can be described using a model involving a Gaussian distribution of distances with an average distance (Rav) of less than 21 A and a half-width (HW) of 36 A. This conformational heterogeneity of PLB is consistent with the 10 structures resolved by NMR for the C41F mutant of PLB in organic cosolvents. In contrast, PLB bound to the Ca-ATPase assumes a unique and highly ordered conformation, where Rav = 14.0 +/- 0.3 A and HW = 3.7 +/- 0.6 A. The small spatial separation between the bound chromophores on PLB is inconsistent with an extended conformation of bound PLB in current models. Thus, to satisfy known interaction sites of PLB and the Ca-ATPase, these findings suggest a reorientation of the nucleotide binding domain of the Ca-ATPase toward the bilayer surface to bring known PLB binding sites into close juxtaposition with residues near the amino-terminus of PLB. Induction of an altered conformation of the nucleotide binding domain of the Ca-ATPase by PLB binding is suggested to underlie the reduced calcium sensitivity associated with PLB inhibition of the pump.

Involvement of the L6-7 loop in SERCA1a Ca2+-ATPase activation by Ca2+ (or Sr2+) and ATP

Wild-type (WT) and the double mutant D813A,D818A (ADA) of the L6-7 loop of SERCA1a were expressed in yeast, purified, and reconstituted into lipids. This allowed us to functionally study these ATPases by both kinetic and spectroscopic means, and to solve previous discrepancies in the published literature about both experimental facts and interpretation concerning the role of this loop in P-type ATPases. We show that in a solubilized state, the ADA mutant experiences a dramatic decrease of its calcium-dependent ATPase activity. On the contrary, reconstituted in a lipid environment, it displays an almost unaltered maximal calcium-dependent ATPase activity at high (millimolar) ATP, with an apparent affinity for Ca(2+) altered only moderately (3-fold). In the absence of ATP, the true affinity of ADA for Ca(2+) is, however, more significantly reduced (20-30-fold) compared with WT, as judged from intrinsic (Trp) or extrinsic (fluorescence isothiocyanate) fluorescence experiments. At low ATP, transient kinetics experiments reveal an overshoot in the ADA phosphorylation level primarily arising from the slowing down of the transition between the nonphosphorylated "E2" and "Ca(2)E1" forms of ADA. At high ATP, this slowing down is only partially compensated for, as ADA turnover remains more sensitive to orthovanadate than WT turnover. ADA ATPase also proved to have a reduced affinity for ATP in studies performed under equilibrium conditions in the absence of Ca(2+), highlighting the long range interactions between L6-7 and the nucleotide-binding site. We propose that these mutations in L6-7 could affect protonation-dependent winding and unwinding events in the nearby M6 transmembrane segment.

Ca2+ occlusion and gating function of Glu309 in the ADP-fluoroaluminate analog of the Ca2+-ATPase phosphoenzyme intermediate

In the absence of ATP the sarcoplasmic reticulum ATPase (SERCA) binds two Ca(2+) with high affinity. The two bound Ca(2+) rapidly undergo reverse dissociation upon addition of EGTA, but can be distinguished by isotopic exchange indicating fast exchange at a superficial site (site II), and retardation of exchange at a deeper site (site I) by occupancy of site II. Site II mutations that allow high affinity binding to site I, but only low affinity binding to site II, show that retardation of isotopic exchange requires higher Ca(2+) concentrations with the N796A mutant, and is not observed with the E309Q mutant even at millimolar Ca(2+). Fluoroaluminate forms a complex at the catalytic site yielding stable analogs of the phosphoenzyme intermediate, with properties similar to E2-P or E1-P.Ca(2). Mutational analysis indicates that Asp(351), Lys(352), Thr(353), Asp(703), Asn(706), Asp(707), Thr(625), and Lys(684) participate in stabilization of fluoroaluminate and Mg(2+) at the phosphorylation site. In the presence of fluoroaluminate and Ca(2+), ADP (or AMP-PCP) favors formation of a stable ADP.E1-P.Ca(2) analog. This produces strong occlusion of Ca(2+) bound to both sites (I and II), whereby dissociation occurs very slowly even following addition of EGTA. Occlusion by fluoraluminate and ADP is not observed with the E309Q mutant, suggesting a gating function of Glu(309) at the mouth of a binding cavity with a single path of entry. This phenomenon corresponds to the earliest step of the catalytic cycle following utilization of ATP. Experiments on limited proteolysis reveal that a long range conformational change, involving displacement of headpiece domains and transmembrane helices, plays a mechanistic role.

Spatial and dynamic interactions between phospholamban and the canine cardiac Ca2+ pump revealed with use of heterobifunctional cross-linking agents

Heterobifunctional thiol to amine cross-linking agents were used to gain new insights on the dynamics and conformational factors governing the interaction between the cardiac Ca2+ pump (SERCA2a) and phospholamban (PLB). PLB is a small protein inhibitor of SERCA2a that reduces enzyme affinity for Ca2+ and thereby regulates cardiac contractility. We found that the PLB monomer with Asn27 or Asn30 changed to Cys (N27C-PLB or N30C-PLB) cross-linked to lysine of SERCA2a within seconds with > or =80% efficiency. Optimal cross-linking occurred at spacer chain lengths of 10 and 15 A for N27C and N30C, respectively. The rapid time course of cross-linking indicated that neither dissociation of PLB pentamers nor binding of PLB monomers to SERCA2a was rate-limiting. Cross-linking occurred only to the E2 (Ca2+-free) conformation of SERCA2a, was strongly favored by nucleotide binding to this state, and was completely inhibited by thapsigargin. Protein sequencing in combination with mutagenesis identified of Lys328 of SERCA2a as the target of cross-linking. A three-dimensional map of interacting residues indicated that the cross-linking distances were entirely compatible with the 10-A distance recently determined between N30C of PLB and Cys318 of SERCA2a. In contrast, Lys3 of PLB did not cross-link to any Lys (or Cys) of SERCA2a, suggesting that previous three-dimensional models that constrain Lys3 near residues 397-400 of thapsigargin-inhibited SERCA2a should be viewed with caution. Furthermore, although earlier models of PLB.SERCA2a are based on thapsigargin-bound SERCA, our results suggest that the nucleotide-bound, E2 conformation is substantially different and represents the key conformational state for interacting with PLB.

Phosphorylation by cAMP-dependent protein kinase modulates the structural coupling between the transmembrane and cytosolic domains of phospholamban

We have used frequency-domain fluorescence spectroscopy to investigate the structural linkage between the transmembrane and cytosolic domains of the regulatory protein phospholamban (PLB). Using an engineered PLB having a single cysteine (Cys(24)) derivatized with the fluorophore N-(1-pyrenyl)maleimide (PMal), we have used fluorescence resonance energy transfer (FRET) to measure the average spatial separation and conformational heterogeneity between PMal bound to Cys(24) in the transmembrane domain and Tyr(6) in the cytosolic domain near the amino terminus of PLB. In these measurements, PMal serves as a FRET donor, and Tyr(6) serves as a FRET acceptor following its nitration by tetranitromethane. The native structure of PLB is retained following site-directed mutagenesis and chemical modification, as indicated by the ability of the derivatized PLB to fully regulate the Ca-ATPase following their co-reconstitution. To assess how phosphorylation modulates the structure of PLB itself, FRET measurements were made following reconstitution of PLB in membrane vesicles made from extracted sarcoplasmic reticulum membrane lipids. We find that the cytosolic domain of PLB assumes a wide range of conformations relative to the transmembrane sequence, consistent with other structural data indicating the presence of a flexible hinge region between the transmembrane and cytosolic domains of PLB. Phosphorylation of Ser(16) by PKA results in a 3 A decrease in the spatial separation between PMal at Cys(24) and nitroTyr(6) and an almost 2-fold decrease in conformational heterogeneity, suggesting a stabilization of the hinge region of PLB possibly through an electrostatic linkage between phosphoSer(16) and Arg(13) that promotes a coil-to-helix transition. This structural transition has the potential to function as a conformational switch, since inhibition of the Ca-ATPase requires disruption of the secondary structure of PLB in the vicinity of the hinge element to permit association with the nucleotide binding domain at a site located approximately 50 A above the membrane surface. Following phosphorylation, the stabilization of the helical content in the hinge domain will disrupt this inhibitory interaction by reducing the maximal dimension of the cytosolic domain of PLB. Thus, stabilization of the structure of PLB following phosphorylation of Ser(16) is part of a switching mechanism, which functions to alter binding interactions between PLB and the nucleotide binding domain of the Ca-ATPase that modulates enzyme inhibition.

NMR studies of the fifth transmembrane segment of sarcoplasmic reticulum Ca2+-ATPase reveals a hinge close to the Ca2+-ligating residues

Two recent X-ray structures have tremendously increased the understanding of the sarco/endoplasmic reticulum Ca(2+)-ATPase (SERCA) and related proteins. Both structures show the fifth transmembrane span (M5) as a single continuous alpha-helix. The inherent structural and dynamic features of this span (Lys758-Glu785) were studied in isolation in sodium dodecyl sulfate (SDS) micelles using liquid-state nuclear magnetic resonance (NMR) spectroscopy. We find that a flexible region (Ile765-Asn768) is interrupting the alpha-helix. The location of the flexible region near the Ca(2+) binding residues Asn768 and Glu771 suggests that together with a similar region in M6 it has a hinge function that may be important for cooperative Ca(2+) binding and occlusion.

Characterization of Ca2+ ATPase residues involved in substrate and cation binding

The role of amino acid residues involved in substrate and cation binding was investigated in complementary experiments on Fe(2+)-catalyzed oxidation and cleavage, limited digestion with proteinase K, and mutational analysis. Cleavage at Ser346 was produced by Fe(2+) in the presence of substrate (ATP or AMP-PNP) and Ca(2+), and was attributed to Fe(2+) bound to a Mg(2+) site near Ser346 and neighboring Glu696. Ca(2+)- and ATP-dependent oxidation of the Thr441 side chain was also observed and attributed to Fe(2+) substituting for Mg(2+) in the Mg(2+)-ATP complex bound to the N domain. Mutation of Arg560 or Glu439 within the N domain interfered with nucleotide-dependent ATPase resistance to digestion with proteinase K. Furthermore, mutation of Lys352, Lys684, Thr353, Asp703, or Asp707 within the P domain produced similar interference, consistent with a role of these residues in substrate stabilization at the catalytic site. In a third group of experiments, equilibrium isotherms were obtained with Asn796Ala and Glu309Gln mutants, demonstrating non-cooperative binding of one Ca(2+) per ATPase, as opposed to cooperative binding of two Ca(2+) by WT enzyme. No high-affinity binding by Asp800Asn, Glu771Gln, and Thr799Ala mutants was detected. It was also demonstrated that the conformational transitions involved in enzyme activation and interconversion of Ca(2+) binding and phosphorylation energy, are triggered by Ca(2+) binding to site II and stabilization of Glu309 (M4) and N796 (M6).