A rapid method for detecting and mapping homology between heterologous DNAs. Evaluation of polyomavirus genomes

A Hierarchical Genotyping Framework Using DNA Melting Temperatures Applied to Adenovirus Species Typing

Known genetic variation, in conjunction with post-PCR melting curve analysis, can be leveraged to provide increased taxonomic detail for pathogen identification in commercial molecular diagnostic tests. Increased taxonomic detail may be used by clinicians and public health decision-makers to observe circulation patterns, monitor for outbreaks, and inform testing practices. We propose a method for expanding the taxonomic resolution of PCR diagnostic systems by incorporating a priori knowledge of assay design and sequence information into a genotyping classification model. For multiplexed PCR systems, this framework is generalized to incorporate information from multiple assays to increase classification accuracy. An illustrative hierarchical classification model for human adenovirus (HAdV) species was developed and demonstrated ~95% cross-validated accuracy on a labeled dataset. The model was then applied to a near-real-time surveillance dataset in which deidentified adenovirus detected patient test data from 2018 through 2021 were classified into one of six adenovirus species. These results show a marked change in both the predicted prevalence for HAdV and the species makeup with the onset of the COVID-19 pandemic. HAdV-B decreased from a pre-pandemic predicted prevalence of up to 40% to less than 5% in 2021, while HAdV-A and HAdV-F species both increased in predicted prevalence.

Ex-Ex Primer: An experimentally validated tool for designing oligonucleotides spanning spliced nucleic acid regions from multiple species

A comparative study of existing junction-primer-designing software revealed many limitations among them. Hence, we developed a new computational program, Ex-Ex Primer, which offers many improved, user-friendly features, and reliably creates junction primers and probes. This online suite can also be used to design primers/probes from other sites of nucleic acid recombination, insertion, deletion, or splicing, and regular probes/primers. The threshold for Tm difference between the complete junctional primer vs its partial sequence, which maps to one of the junctional regions, was changed based on an important observation made during the initial experimental validations. The tool is now thoroughly checked with RT-PCR and RT-qPCR experiments with more than 250 primer pairs over a few years. The junction-primer-designing features of the software are also better than other equivalent tools. Visualizing the exons and introns across transcripts, and enabling primer designing based on information from Ensembl, are some of the unique features of this tool. The primers suggested by the tool can be used to detect the expression of known transcripts, to test the existence of predicted DNA or RNA joints via hybridization-based techniques, or for validation and in silico analysis of RNA-Seq. URL: http://resource2.ibab.ac.in/exprimer/.

Preparation of long single-strand DNA concatemers for high-level fluorescence in situ hybridization

Fluorescence in situ hybridization (FISH) is a powerful tool to visualize transcripts in fixed cells and tissues. Despite the recent advances in FISH detection methods, it remains challenging to achieve high-level FISH imaging with a simple workflow. Here, we introduce a method to prepare long single-strand DNA concatemers (lssDNAc) through a controllable rolling-circle amplification (CRCA). Prepared lssDNAcs are used to develop AmpFISH workflows. In addition, we present its applications in different scenarios. AmpFISH shows the following advantages: 1) enhanced FISH signal-to-noise ratio (SNR) up to 160-fold compared with single-molecule FISH; 2) simultaneous detection of FISH signals and fluorescent proteins or immunofluorescence (IF) in tissues; 3) simple workflows; and 4) cost-efficiency. In brief, AmpFISH provides convenient and versatile tools for sensitive RNA/DNA detection and to gain useful information on cellular molecules using simple workflows.

Single Copy Oligonucleotide Fluorescence In Situ Hybridization Probe Design Platforms: Development, Application and Evaluation

Oligonucleotides fluorescence in situ hybridization (Oligo-FISH) is an emerging technology and is an important tool in research areas such as detection of chromosome variation, identification of allopolyploid, and deciphering of three-dimensional (3D) genome structures. Based on the demand for highly efficient oligo probes for oligo-FISH experiments, increasing numbers of tools have been developed for probe design in recent years. Obsolete oligonucleotide design tools have been adapted for oligo-FISH probe design because of their similar considerations. With the development of DNA sequencing and large-scale synthesis, novel tools have been designed to increase the specificity of designed oligo probes and enable genome-scale oligo probe design, which has greatly improved the application of single copy oligo-FISH. Despite this, few studies have introduced the development of the oligo-FISH probe design tools and their application in FISH experiments systematically. Besides, a comprehensive comparison and evaluation is lacking for the available tools. In this review, we provide an overview of the oligo-FISH probe design process, summarize the development and application of the available tools, evaluate several state-of-art tools, and eventually provide guidance for single copy oligo-FISH probe design.

Global analysis of repetitive DNA from unassembled sequence reads using RepeatExplorer2

RepeatExplorer2 is a novel version of a computational pipeline that uses graph-based clustering of next-generation sequencing reads for characterization of repetitive DNA in eukaryotes. The clustering algorithm facilitates repeat identification in any genome by using relatively small quantities of short sequence reads, and additional tools within the pipeline perform automatic annotation and quantification of the identified repeats. The pipeline is integrated into the Galaxy platform, which provides a user-friendly web interface for script execution and documentation of the results. Compared to the original version of the pipeline, RepeatExplorer2 provides automated annotation of transposable elements, identification of tandem repeats and enhanced visualization of analysis results. Here, we present an overview of the RepeatExplorer2 workflow and provide procedures for its application to (i) de novo repeat identification in a single species, (ii) comparative repeat analysis in a set of species, (iii) development of satellite DNA probes for cytogenetic experiments and (iv) identification of centromeric repeats based on ChIP-seq data. Each procedure takes approximately 2 d to complete. RepeatExplorer2 is available at https://repeatexplorer-elixir.cerit-sc.cz .

Detecting DNA and RNA and Differentiating Single-Nucleotide Variations via Field-Effect Transistors

We detect short oligonucleotides and distinguish between sequences that differ by a single base, using label-free, electronic field-effect transistors (FETs). Our sensing platform utilizes ultrathin-film indium oxide FETs chemically functionalized with single-stranded DNA (ssDNA). The ssDNA-functionalized semiconducting channels in FETs detect fully complementary DNA sequences and differentiate these sequences from those having different types and locations of single base-pair mismatches. Changes in charge associated with surface-bound ssDNA vs double-stranded DNA (dsDNA) alter FET channel conductance to enable detection due to differences in DNA duplex stability. We illustrate the capability of ssDNA-FETs to detect complementary RNA sequences and to distinguish from RNA sequences with single nucleotide variations. The development and implementation of electronic biosensors that rapidly and sensitively detect and differentiate oligonucleotides present new opportunities in the fields of disease diagnostics and precision medicine.

Enhancing the stability of DNA origami nanostructures: staple strand redesign versus enzymatic ligation

DNA origami structures have developed into versatile tools in molecular sciences and nanotechnology. Currently, however, many potential applications are hindered by their poor stability, especially under denaturing conditions. Here we present and evaluate two simple approaches to enhance DNA origami stability. In the first approach, we elevated the melting temperature of nine critical staple strands by merging the oligonucleotides with adjacent sequences. In the second approach, we increased the global stability by enzymatically ligating all accessible staple strand ends directly. By monitoring the gradual urea-induced denaturation of a prototype triangular DNA origami modified by these approaches using atomic force microscopy, we show that rational redesign of a few, critical staple strands leads to a considerable increase in overall stability at high denaturant concentration and elevated temperatures. In addition, enzymatic ligation yields DNA nanostructures with superior stability at up to 37 °C and in the presence of 6 M urea without impairing their shape. This bio-orthogonal approach is readily adaptable to other DNA origami structures without the need for synthetic nucleotide modifications when structural integrity under harsh conditions is required.

In-silico Design of DNA Oligonucleotides: Challenges and Approaches

DNA oligonucleotides are essential components of a high number of technologies in molecular biology. The key event of each oligonucleotide-based assay is the specific binding between oligonucleotides and their target DNA. However, single-stranded DNA molecules also tend to bind to unintended targets or themselves. The probability of such unspecific binding increases with the complexity of an assay. Therefore, accurate data management and design workflows are necessary to optimize the in-silico design of primers and probes. Important considerations concerning computational infrastructure and run time need to be made for both data management and the design process. Data retrieval, data updates, storage, filtering and analysis are the main parts of a sequence data management system. Each part needs to be well-implemented as the resulting sequences form the basis for the oligonucleotide design. Important key features, such as the oligonucleotide length, melting temperature, secondary structures and primer dimer formation, as well as the specificity, should be considered for the in-silico selection of oligonucleotides. The development of an efficient oligonucleotide design workflow demands the right balance between the precision of the applied computer models, the general expenditure of time, and computational workload. This paper gives an overview of important parameters during the design process, starting from the data retrieval, up to the design parameters for optimized oligonucleotide design.

OligoCOOL: A mobile application for nucleotide sequence analysis

Today smartphones are inseparable parts of modern life and are capable of performing many desktop computers' tasks such as scientific analysis with greater convenience. Here, we present OligoCOOL, which is an Android application for analyzing nucleic sequences. This application enables users to perform several common biomedical analyses for a given nucleotide sequence. OligoCOOL is a freely accessible Android app at http://bioinf.modares.ac.ir/software/OligoCOOL, which can be a suitable tool for the experimental design in the laboratories. This application also can be used to learn the basics of nucleotide sequence analysis. © 2019 International Union of Biochemistry and Molecular Biology, 47(2): 201-206, 2019.

Detection of mRNA and Associated Molecules by ISH-IEM on Frozen Sections

The use of tagged RNA probes to directly hybridize frozen sections of chemically fixed tissues, followed by the tag detection with specific antibodies and gold conjugates form the core of the in situ hybridization (ISH)-immunoelectron microscopy (IEM) method that we have developed and successfully used to detect endogenous gurken and bicoid mRNAs in Drosophila oocytes.

Diagnostic accuracy of multiplex real-time PCR approaches compared with cultivation -based detection methods: Monitoring the endopathogenic microbiota pre and post photo-activated disinfection

BACKGROUND

Several microbial species have been implicated in the pathogenesis of endodontic diseases that colonize the infected root canal system. Since the complete removal of endopathogenic agents is essential in endodontic infection therapy, photo-activated disinfection (PAD) is suggested as an alternative method to traditional antimicrobial therapy. Recent studies reported that the molecular methods with low sensitivity and high efficiency to identify fastidious anaerobic endopathogenic microbiota can be replaced by the cultivation-based approaches. This study aimed to validate the multiplex real-time PCR in order to identify six common microorganisms associated with the endodontic infections before and after the PAD.

MATERIALS AND METHODS

Microbial specimens from the root canals of 50 patients with primary and secondary endodontic infections were collected before PAD treatment using sterile paper points. Toluidine blue O (TBO)-mediated PAD was performed on the root canals, followed by resampling. The prePAD- and postPAD-treatment endodontic samples were transferred to a transport medium and six target microorganisms were then identified from the samples using the microbiological culture techniques and multiplex real-time PCR approach.

RESULTS

Multiplex real-time PCR could represent the presence of all target microorganisms in 100% cases before and after the PAD. Before PAD, using the culture method, Enterococcus faecalis (100%) was found to be the most frequent, followed by Veillonella parvula (97.5%), Aggregatibacter actinomycetemcomitans (94.7%), Porphyromonas gingivalis (84.3%), Lactobacillus rhamnosus (84.3%), and Actinomyces naeslundii (66.6%); whereas, after PAD these microbial frequencies changed to 80%, 83.3%, 66.6%, 80%, 66.6%, and 33.3%, respectively. The sensitivity and negative predictive value of the multiplex real-time PCR were 100% before and after the PAD, whereas the highest and the lowest specificities were 100% and 82% before PAD, and 97% and 89% after PAD for E. faecalis and P. gingivalis, respectively. The highest (100%) and the lowest (66%) positive predictive values were for V. parvula and A. naeslundii before and after the PAD, respectively.

CONCLUSION

As observed from the results, multiplex real-time PCR demonstrated high sensitivity and specificity when compared to the culture technique. Therefore, it can prove to be a highly sensitive technique to detect the endodontic infections microflora.

An experimental study for rapid detection and quantification of endodontic microbiota following photo-activated disinfection via new multiplex real-time PCR assay

BACKGROUND

The infected root canal system harbors one of the highest accumulations of polymicrobial infections. Since the eradication of endopathogenic microbiota is a major goal in endodontic infection therapy, photo-activated disinfection (PAD) can be used as an alternative therapeutic method in endodontic treatment. Compared to cultivation-based approaches, molecular techniques are more reliable for identifying microbial agents associated with endodontic infections. The purpose of this study was to evaluate the ability of designed multiplex real-time PCR protocol for the rapid detection and quantification of six common microorganisms involved in endodontic infection before and after the PAD.

MATERIALS AND METHODS

Samples were taken from the root canals of 50 patients with primary and secondary/persistent endodontic infections using sterile paper points. PAD with toluidine blue O (TBO) plus diode laser was performed on root canals. Resampling was then performed, and the samples were transferred to transport medium. Then, six target microorganisms were detected using multiplex real-time PCR before and after the PAD.

RESULTS

Veillonella parvula was found using multiplex real-time PCR to have the highest frequency among samples collected before the PAD (29.4%), followed by Porphyromonas gingivalis (23.1%), Aggregatibacter actinomycetemcomitans (13.6%), Actinomyces naeslundii (13.0%), Enterococcus faecalis (11.5%), and Lactobacillus rhamnosus (9.4%). After TBO-mediated PAD, P. gingivalis strains, the most resistance microorganisms, were recovered in 41.7% of the samples using molecular approach (P > 0.05).

CONCLUSION

As the results shown, multiplex real-time PCR as an accurate detection approach with high-throughput and TBO-mediated PAD as an efficient antimicrobial strategy due to the significant reduction of the endopathogenic count can be used for detection and treatment of microbiota involved in infected root canals, respectively.

Label-free detection of missense mutations and methylation differences in the p53 gene using optically diffracting hydrogels

We have developed a novel approach for DNA detection as well as genetic screening of mutations by uniquely combining DNA-responsive and optically diffracting materials. This approach entails the polymerization of a photonic crystal within a hydrogel network that alters the diffraction of light in response to a target DNA strand. The utility of this approach, which permits label-free sensing, was demonstrated via the detection of a target sequence from the DNA binding domain of the major tumor suppressor protein p53. Using a complementary capture probe strand, we were able to detect down to picomole concentrations of the target p53 sequence. Moreover, we demonstrated that this approach could readily detect a single base pair mutation in the target strand, which corresponds to the hotspot cancer mutation R175H in p53. The sensitivity of detection was increased by lowering the rate of annealing of the target strand and adjusting the solution ionic strength during optical characterization. Changes in ionic strength during characterization impact the melting temperature of the bound target DNA and the Donnan potential between the hydrogel and solution, which influence detection. We further showed that this approach is sensitive to epigenetic changes via the detection of a fully methylated form of the target p53 sequence. Ultimately, this approach represents a new paradigm for DNA detection and specifically genetic screening of p53 as well as other disease markers and nucleotide modifications that alter the properties of DNA (e.g., epigenetic alterations and adducts with chemical carcinogens).

ssDNA Pairing Accuracy Increases When Abasic Sites Divide Nucleotides into Small Groups

Accurate sequence dependent pairing of single-stranded DNA (ssDNA) molecules plays an important role in gene chips, DNA origami, and polymerase chain reactions. In many assays accurate pairing depends on mismatched sequences melting at lower temperatures than matched sequences; however, for sequences longer than ~10 nucleotides, single mismatches and correct matches have melting temperature differences of less than 3°C. We demonstrate that appropriately grouping of 35 bases in ssDNA using abasic sites increases the difference between the melting temperature of correct bases and the melting temperature of mismatched base pairings. Importantly, in the presence of appropriately spaced abasic sites mismatches near one end of a long dsDNA destabilize the annealing at the other end much more effectively than in systems without the abasic sites, suggesting that the dsDNA melts more uniformly in the presence of appropriately spaced abasic sites. In sum, the presence of appropriately spaced abasic sites allows temperature to more accurately discriminate correct base pairings from incorrect ones.

Isothermal DNA origami folding: avoiding denaturing conditions for one-pot, hybrid-component annealing

The DNA origami technique offers great potential for nanotechnology. Using biomolecular self-assembly, defined 2D and 3D nanoscale DNA structures can be realized. DNA origami allows the positioning of proteins, fluorophores or nanoparticles with an accuracy of a few nanometers and enables thereby novel nanoscale devices. Origami assembly usually includes a thermal denaturation step at 90 °C. Additional components used for nanoscale assembly (such as proteins) are often thermosensitive, and possibly damaged by such harsh conditions. They have therefore to be attached in an extra second step to avoid defects. To enable a streamlined one-step nanoscale synthesis - a so called one-pot folding - an adaptation of the folding procedures is required. Here we present a thermal optimization of this process for a 2D DNA rectangle-shaped origami resulting in an isothermal assembly protocol below 60 °C without thermal denaturation. Moreover, a room temperature protocol is presented using the chemical additive betaine, which is biocompatible in contrast to chemical denaturing approaches reported previously.

Mechanism of DNA assembly as revealed by energy barriers

DNA assembly is determined by the conformation adjustment rate of strands and the spreading rate of strands on the nuclei surface.

Loop-mediated isothermal amplification of vanA gene enables a rapid and naked-eye detection of vancomycin-resistant enterococci infection

Vancomycin-resistant enterococci (VRE) are one of the leading causes of nosocomial infection at intensive care unit (ICU). A rapid and sensitive detection of VRE infection is in high demand for timely and suitable antibiotic treatment. Here, we optimized a distinct DNA-based diagnostic technique, loop-mediated isothermal amplification (LAMP) for a rapid detection of the presence of vanA gene, a critical component of the gene cluster required for vancomycin resistance. Amplification efficiency was optimal at 62°C and with 2mM MgSO4. The detection limit of the DNA template was 80pg and LAMP amplicons were detected within 40min; thereby suggesting a potential applicability of LAMP as a sensitive and urgent diagnostic method. Furthermore, positive LAMP reaction was directly detected with the naked-eye by monitoring the formation of a white precipitate or the color change induced by hydroxy naphthol blue (HNB) dye. Finally, 56 clinical isolates were successfully tested for the presence of vanA gene by LAMP, which was determined to be more sensitive than PCR. Together, our results clearly demonstrate the usefulness of LAMP for the diagnosis of VRE infection.

Flexible and efficient genome tiling design with penalized uniqueness score

Background

As a powerful tool in whole genome analysis, tiling array has been widely used in the answering of many genomic questions. Now it could also serve as a capture device for the library preparation in the popular high throughput sequencing experiments. Thus, a flexible and efficient tiling array design approach is still needed and could assist in various types and scales of transcriptomic experiment.

Results

In this paper, we address issues and challenges in designing probes suitable for tiling array applications and targeted sequencing. In particular, we define the penalized uniqueness score, which serves as a controlling criterion to eliminate potential cross-hybridization, and a flexible tiling array design pipeline. Unlike BLAST or simple suffix array based methods, computing and using our uniqueness measurement can be more efficient for large scale design and require less memory. The parameters provided could assist in various types of genomic tiling task. In addition, using both commercial array data and experiment data we show, unlike previously claimed, that palindromic sequence exhibiting relatively lower uniqueness.

Conclusions

Our proposed penalized uniqueness score could serve as a better indicator for cross hybridization with higher sensitivity and specificity, giving more control of expected array quality. The flexible tiling design algorithm incorporating the penalized uniqueness score was shown to give higher coverage and resolution. The package to calculate the penalized uniqueness score and the described probe selection algorithm are implemented as a Perl program, which is freely available at http://www1.fbn-dummerstorf.de/en/forschung/fbs/fb3/paper/2012-yang-1/OTAD.v1.1.tar.gz.

DNA origami with double-stranded DNA as a unified scaffold

Scaffolded DNA origami is a widely used technology for self-assembling precisely structured nanoscale objects that contain a large number of addressable features. Typical scaffolds are long, single strands of DNA (ssDNA) that are folded into distinct shapes through the action of many, short ssDNA staples that are complementary to several different domains of the scaffold. However, sources of long single-stranded DNA are scarce, limiting the size and complexity of structures that can be assembled. Here we demonstrated that dsDNA (double-stranded DNA) scaffolds can be directly used to fabricate integrated DNA origami structures that incorporate both of the constituent ssDNA molecules. Two basic principles were employed in the design of scaffold folding paths: folding path asymmetry and periodic convergence of the two ssDNA scaffold strands. Asymmetry in the folding path minimizes unwanted complementarity between staples, and incorporating an offset between the folding paths of each ssDNA scaffold strand reduces the number of times that complementary portions of the strands are brought into close proximity with one another, both of which decrease the likelihood of dsDNA scaffold recovery. Meanwhile, the folding paths of the two ssDNA scaffold strands were designed to periodically converge to promote the assembly of a single, unified structure rather than two individual ones. Our results reveal that this basic strategy can be used to reliably assemble integrated DNA nanostructures from dsDNA scaffolds.

Patho-Genes.org: a website dedicated to gene sequences of potential bioterror bacteria and PCR primers used to amplify them

Pathogenic agents can be very hard to detect, and usually they do not cause illness for several hours or days. To improve the speed and the accuracy of detection tests and satisfy the needs of early diagnosis, molecular biology methods such as PCR are now used. However, selecting a proper target gene and designing good primers is often not easy. We present a dedicated website, http://patho-genes.org, where we provide every sequence, functional annotation, published primer and relevant article for every annotated gene of major pathogenic bacterial species listed as key agents to be used for a bioterrorism attack. Each published primer was analysed to determine its melting temperature, its specificity and its coverage (i.e. its sensitivity against every allele of its target gene). Data generated have been organized in the form of data sheet for each gene, which are available through multiple browser panels and query systems.

In silico analyses of primers used to detect the pathogenicity genes of Vibrio cholerae

In Vibrio cholerae, the etiological agent of cholera, most of the virulence genes are located in two pathogenicity islands, named TCP (Toxin-Co-regulated Pilus) and CTX (Cholera ToXins). For each V. cholerae pathogenicity gene, we retrieved every primer published since 1990 and every known allele in order to perform a complete in silico survey and assess the quality of the PCR primers used for amplification of these genes. Primers with a melting temperature in the range 55–60°C against any target sequence were considered valid. Our survey clearly revealed that two thirds of the published primers are not able to properly detect every genetic variant of the target genes. Moreover, the quality of primers did not improve with time. Their lifetime, i.e. the number of times they were cited in the literature, is also not a factor allowing the selection of valid primers. We were able to improve some primers or design new primers for the few cases where no valid primer was found. In conclusion, many published primers should be avoided or improved for use in molecular detection tests, in order to improve and perfect specificity and coverage. This study suggests that bioinformatic analyses are important to validate the choice of primers.

PhiSiGns: an online tool to identify signature genes in phages and design PCR primers for examining phage diversity

BACKGROUND

Phages (viruses that infect bacteria) have gained significant attention because of their abundance, diversity and important ecological roles. However, the lack of a universal gene shared by all phages presents a challenge for phage identification and characterization, especially in environmental samples where it is difficult to culture phage-host systems. Homologous conserved genes (or "signature genes") present in groups of closely-related phages can be used to explore phage diversity and define evolutionary relationships amongst these phages. Bioinformatic approaches are needed to identify candidate signature genes and design PCR primers to amplify those genes from environmental samples; however, there is currently no existing computational tool that biologists can use for this purpose.

RESULTS

Here we present PhiSiGns, a web-based and standalone application that performs a pairwise comparison of each gene present in user-selected phage genomes, identifies signature genes, generates alignments of these genes, and designs potential PCR primer pairs. PhiSiGns is available at (http://www.phantome.org/phisigns/; http://phisigns.sourceforge.net/) with a link to the source code. Here we describe the specifications of PhiSiGns and demonstrate its application with a case study.

CONCLUSIONS

PhiSiGns provides phage biologists with a user-friendly tool to identify signature genes and design PCR primers to amplify related genes from uncultured phages in environmental samples. This bioinformatics tool will facilitate the development of novel signature genes for use as molecular markers in studies of phage diversity, phylogeny, and evolution.

pcrEfficiency: a Web tool for PCR amplification efficiency prediction

Background

Relative calculation of differential gene expression in quantitative PCR reactions requires comparison between amplification experiments that include reference genes and genes under study. Ignoring the differences between their efficiencies may lead to miscalculation of gene expression even with the same starting amount of template. Although there are several tools performing PCR primer design, there is no tool available that predicts PCR efficiency for a given amplicon and primer pair.

Results

We have used a statistical approach based on 90 primer pair combinations amplifying templates from bacteria, yeast, plants and humans, ranging in size between 74 and 907 bp to identify the parameters that affect PCR efficiency. We developed a generalized additive model fitting the data and constructed an open source Web interface that allows the obtention of oligonucleotides optimized for PCR with predicted amplification efficiencies starting from a given sequence.

Conclusions

pcrEfficiency provides an easy-to-use web interface allowing the prediction of PCR efficiencies prior to web lab experiments thus easing quantitative real-time PCR set-up. A web-based service as well the source code are provided freely at http://srvgen.upct.es/efficiency.html under the GPL v2 license.

Engineering DNA-based functional materials

While DNA is a genetic material, it is also an inherently polymeric material made from repeating units called nucleotides. Although DNA's biological functions have been studied for decades, the polymeric features of DNA have not been extensively exploited until recently. In this tutorial review, we focus on two aspects of using DNA as a polymeric material: (1) the engineering methods, and (2) the potential real-world applications. More specifically, various strategies for constructing DNA-based building blocks and materials are introduced based on DNA topologies, which include linear, branched/dendritic, and networked. Different applications in nanotechnology, medicine, and biotechnology are further reviewed.

Characterization of the adsorption of oligonucleotides on mercaptopropionic acid-coated CdSe/ZnS quantum dots using fluorescence resonance energy transfer

Semiconductor quantum dots (QDs) coated with thioalkyl acid ligands are often used as probes and reporters for nucleic acid sensing, or protein sensing using aptamers, and are also potential vectors for gene delivery. In such applications, the interactions that potentially lead to the adsorption of oligonucleotides onto the surface of colloidal QDs are an important consideration. To explore such interactions, fluorescence resonance energy transfer (FRET) between QDs and oligonucleotides labeled with a fluorescent dye was used to identify and characterize a set of conditions that favor strong adsorption on 3-mercaptopropionic acid (MPA)-coated CdSe/ZnS QDs. Adsorption curves and competitive binding experiments were used to determine that the order of affinity for nucleobase adsorption was dC>dA≥dG≫dT. The length of the oligonucleotide sequence was also important, with an 80-mer sequence adsorbing more strongly than its 20-mer analog. Adsorption decreased with increasing pH and corresponded to the ionization of the carboxylic acid groups of the MPA ligands. Increased ionic strength partially offsets ligand ionization and increased the extent of adsorption. The interaction between QDs and oligonucleotides was labile, with increases in adsorption at lower concentrations of oligonucleotide and with an increasing number of oligonucleotides per QD. The results were consistent with a hydrogen-bonding model for adsorption, where neutral thioalkyl acid ligands interact favorably with nucleobases and ionized ligands resist adsorption.

Development of a DNA-based macroarray for the detection and identification of Amanita species

A DNA-based macroarray was designed to quickly and accurately identify certain Amanita mushroom specimens at the species level. The macroarray included probes for Amanita phalloides and Amanita ocreata, toxic species responsible for most mushroom poisonings, and Amanita lanei and Amanita velosa, edible species sometimes confused with toxic species, based on sequences of the highly variable internal transcribed spacer (ITS) region of rDNA. A cryptic species related to A. ocreata and one related to A. lanei, identifiable by ITS sequences, were also included. Specific multiple oligonucleotide probes were spotted onto nylon membranes and the optimal hybridization temperatures were determined. The Amanita DNA array was highly specific, sensitive (0.5 ng DNA/μL and higher were detected), and reproducible. In two case studies, the method proved useful when only small amounts of mushroom tissue remained after a suspected poisoning. An identification could be completed in 12 h.

Identification of species by multiplex analysis of variable-length sequences

The quest for a universal and efficient method of identifying species has been a longstanding challenge in biology. Here, we show that accurate identification of species in all domains of life can be accomplished by multiplex analysis of variable-length sequences containing multiple insertion/deletion variants. The new method, called SPInDel, is able to discriminate 93.3% of eukaryotic species from 18 taxonomic groups. We also demonstrate that the identification of prokaryotic and viral species with numeric profiles of fragment lengths is generally straightforward. A computational platform is presented to facilitate the planning of projects and includes a large data set with nearly 1800 numeric profiles for species in all domains of life (1556 for eukaryotes, 105 for prokaryotes and 130 for viruses). Finally, a SPInDel profiling kit for discrimination of 10 mammalian species was successfully validated on highly processed food products with species mixtures and proved to be easily adaptable to multiple screening procedures routinely used in molecular biology laboratories. These results suggest that SPInDel is a reliable and cost-effective method for broad-spectrum species identification that is appropriate for use in suboptimal samples and is amenable to different high-throughput genotyping platforms without the need for DNA sequencing.

ISH-IEM: a sensitive method to detect endogenous mRNAs at the ultrastructural level

This protocol describes the combination of in situ hybridization (ISH) with cryo-immunolabeling methods to allow the simultaneous detection at the ultrastructural level of mRNAs and proteins. The procedure consists of five steps and takes 4-5 d: (i) acquisition of ultrathin frozen sections of chemically fixed tissues or cells; (ii) hybridization of the sections with digoxigenin (DIG) or biotin-labeled RNA probes; (iii) detection of the bound probe with antibodies and protein A-gold (PAG); (iv) labeling of proteins of interest (optional); and (v) visualization by transmission electron microscopy (immuno-electron microscopy (IEM)). This technique allows the simultaneous detection of endogenous/overexpressed/injected RNAs and proteins while preserving the cell ultrastructure. The protocol is also suitable for mRNA detection on semi-thin frozen sections in combination with immunofluorescence. The localization of targeted transcripts, such as gurken and oskar mRNA in the Drosophila oocyte, and of structural elements and proteins that mediate their localization have been revealed using this technique.

DNA methylation of developmental genes in pediatric medulloblastomas identified by denaturation analysis of methylation differences

DNA methylation might have a significant role in preventing normal differentiation in pediatric cancers. We used a genomewide method for detecting regions of CpG methylation on the basis of the increased melting temperature of methylated DNA, termed denaturation analysis of methylation differences (DAMD). Using the DAMD assay, we find common regions of cancer-specific methylation changes in primary medulloblastomas in critical developmental regulatory pathways, including Sonic hedgehog (Shh), Wingless (Wnt), retinoic acid receptor (RAR), and bone morphogenetic protein (BMP). One of the commonly methylated loci is the PTCH1-1C promoter, a negative regulator of the Shh pathway that is methylated in both primary patient samples and human medulloblastoma cell lines. Treatment with the DNA methyltransferase inhibitor 5-aza-2'-deoxycytidine (5-aza-dC) increases the expression of PTCH1 and other methylated loci. Whereas genetic mutations in PTCH1 have previously been shown to lead to medulloblastoma, our study indicates that epigenetic silencing of PTCH1, and other critical developmental loci, by DNA methylation is a fundamental process of pediatric medulloblastoma formation. This finding warrants strong consideration for DNA demethylating agents in future clinical trials for children with this disease.

LOMA: a fast method to generate efficient tagged-random primers despite amplification bias of random PCR on pathogens

BACKGROUND

Pathogen detection using DNA microarrays has the potential to become a fast and comprehensive diagnostics tool. However, since pathogen detection chips currently utilize random primers rather than specific primers for the RT-PCR step, bias inherent in random PCR amplification becomes a serious problem that causes large inaccuracies in hybridization signals.

RESULTS

In this paper, we study how the efficiency of random PCR amplification affects hybridization signals. We describe a model that predicts the amplification efficiency of a given random primer on a target viral genome. The prediction allows us to filter false-negative probes of the genome that lie in regions of poor random PCR amplification and improves the accuracy of pathogen detection. Subsequently, we propose LOMA, an algorithm to generate random primers that have good amplification efficiency. Wet-lab validation showed that the generated random primers improve the amplification efficiency significantly.

CONCLUSION

The blind use of a random primer with attached universal tag (random-tagged primer) in a PCR reaction on a pathogen sample may not lead to a successful amplification. Thus, the design of random-tagged primers is an important consideration when performing PCR.

Restriction map and southern analysis of the bean golden mosaic virus genome

A restriction map showing 5'-3' polarity for two species of circular single-stranded (ss) DNA from bean golden mosaic virus (BGMV) is presented. The two viral single-stranded DNAs, which are very similar in size, were separated by prolonged agarose gel electrophoresis at low voltage. Hybridization analysis using probes made from these separated DNAs shows they are largely dissimilar in nucleotide sequence except for a common region of high homology which has been mapped to a unique location on each species. Molecular clones of BGMV DNA from restriction fragments comprising all of one of the two DNAs and part of the other were used to confirm the restriction and hybridization analysis. These results provide further evidence consistent with the hypothesis that BGMV and other geminiviruses possess divided genomes with two components of nearly equal size.

Comparison of sequence diversity in several cytoplasmic polyhedrosis viruses

Sequence homology among several different cytoplasmic polyhedrosis virus (CPV) types and the human reovirus (type 1) was examined by Northern blot analysis and S, nuclease analysis, using random-primed cDNA probes synthesized from total genomic RNA. The results show no homology among the CPV type 1, Bombyx mori CPV, type 5, Orgyia pseudotsugata CPV, type 8, Manduca sexta CPV and the human reovirus (type 1). However, there was significant homology among three type 5 CPVs, O. pseudotsugata CPV, Euxoa scandens CPV, and Heliothis armigera CPV. The O. pseudotsugata CPV and E. scandens CPV were 43-44% homologous while each was 6-13% homologous with the H. armigera CPVusing stringent conditions of hybridization.

Towards a target label-free suboptimum oligonucleotide displacement-based detection system

A novel method for the future development of label-free DNA sensors is proposed here. The approach is based on the displacement of a labelled suboptimum mutated oligonucleotide hybridised with the immobilised biotin-capture probe. The target fully complementary to the biotin-capture probe can displace the labelled oligonucleotide causing a subsequent decrease of the signal that verifies the presence of the target. The decrease of signal was demonstrated to be proportional to the target concentration. A study of the hybridisation of mutated and complementary labelled oligonucleotides with an immobilised biotin-capture probe was carried out. Different kinetic and thermodynamic behaviour was observed for heterogeneous hybridisation of biotin-capture probe with complementary or suboptimum oligonucleotides. The displacement method evaluated colourimetrically achieved the objective of decreasing the response time from 1 h for direct hybridisation of 19-mer oligonucleotides in the direct enzyme-linked oligonucleotide assay (ELONA) to 5 min in the case of displacement detection in the micromolar concentration range.

A Macroarray System for the Detection of Fungal and Oomycete Pathogens of Solanaceous Crops

There are numerous fungal and oomycete pathogens that cause severe damage to solanaceous crops. Rapid and accurate detection and identification of these pathogens is critical for plant disease management. Recently, DNA array technology has been successfully applied for simultaneous detection of multiple microorganisms from various habitats. The goal of this project was to develop a multiplex detection and identification system for major fungal and oomycete pathogens of solanaceous crops. To facilitate this goal, we used a membrane-based macroarray technology that included at least two specific oligonucleotides per pathogen. Based on the internal transcribed spacer sequences of the rRNA genes, 105 oligonucleotides (17 to 27 bases long) specific for 25 pathogens of solanaceous crops were designed and spotted on a nylon membrane. The array was tested against the 25 target pathogen species, 46 infected field samples, and a number of nontarget species. Our results indicate that the oligonucleotide-based macroarray detection system is a reliable and effective method for pathogen detection and identification even when multiple pathogens are present in a field sample.

A multiplex PCR-based method for the detection and early identification of wood rotting fungi in standing trees

AIMS

The goal of this research was the development of a PCR-based assay to identify important decay fungi from wood of hardwood tree species in northern temperate regions.

METHODS AND RESULTS

Eleven taxon-specific primers were designed for PCR amplification of either nuclear or mitochondrial ribosomal DNA regions of Armillaria spp., Ganoderma spp., Hericium spp., Hypoxylon thouarsianum var. thouarsianum, Inonotus/Phellinus-group, Laetiporus spp., Perenniporia fraxinea, Pleurotus spp., Schizophyllum spp., Stereum spp. and Trametes spp. Multiplex PCR reactions were developed and optimized to detect fungal DNA and identify each taxon with a sensitivity of at least 1 pg of target DNA in the template. This assay correctly identified the agents of decay in 82% of tested wood samples.

CONCLUSIONS

The development and optimization of multiplex PCRs allowed for reliable identification of wood rotting fungi directly from wood.

SIGNIFICANCE AND IMPACT OF THE STUDY

Early detection of wood decay fungi is crucial for assessment of tree stability in urban landscapes. Furthermore, this method may prove useful for prediction of the severity and the evolution of decay in standing trees.

Macroarray Detection of Solanaceous Plant Pathogens in the Fusarium solani Species Complex

Members of the Fusarium solani species complex (FSSC), which are morphologically similar but have more than 45 distinct lineages, were chosen as targets for the development of a macroarray detection system that would be broadly adaptable. Thirty-three oligonucleotides (17 to 27 mers) were designed from the internal transcribed spacer (ITS) of the ribosomal RNA genes of 17 FSSC isolates, which belong to 12 phylogenetically closely related species. Of the 33 oligonucleotides on the array, 21 were useful in discriminating all 12 species, some of which had only a single nucleotide difference among them. The high specificity of this method was achieved by optimizing the hybridization temperature and oligo probe length, which had a more substantial effect on the array performance than the melting temperature and the DNA G+C content (G/C%) of the probes. The array was validated by testing inoculated greenhouse samples and diseased field plant samples.

Preliminary dielectric measurement and analysis protocol for determining the melting temperature and binding energy of short sequences of DNA in solution

Measurement of the real dielectric constant of bulk buffer solutions containing short sequences of DNA as a function of temperature through the DNA melting or denaturiztion transition can be used to determine melting temperatures, T(m), and to estimate the binding energy of the complimentary strands. We describe a preliminary dielectric measurement and analysis protocol to determine these parameters and its application to two known short sequences. The relative real dielectric constant for the bulk solutions was determined over the frequency range of 50 Hz-20 kHz and temperature range of <40-65 degrees C. The measurements were performed on dilute solutions and utilized low electric field strengths. Based on fits to the data by modified sigmoid functions, the melting temperatures, width of transition, and binding energy for the two sequences in solution were estimated. It was observed that the order of the transition appeared to be second order. The results were then compared against predictions of a number of models from the literature that provide theoretical estimates for the melting temperatures of known short sequences of DNA.

Methods for diagnosing papillomavirus infection

The morphology of the lesion and the site in which the lesion is found are the initial clues in classifying papillomavirus-induced neoplasia. Human papillomavirus (HPV) types have limited site-specificity and differ in their association with benign or malignant neoplastic development. Cytopathology, electron microscopy, antigen detection and molecular hybridization all play a role in the armamentarium of diagnostic methods. Although nitrocellulose blotting procedures provide the most accurate and sensitive method for detecting and characterizing viral nucleic acid sequences, recent improvements in cytological hybridization methods allow for rapid detection of virus and analysis of HPV type directly in biopsied tissue and in cervical smears. In particular, these in situ hybridization procedures facilitate retrospective studies of stored specimens.

Direct counting of Cryptosporidium parvum oocysts using fluorescence in situ hybridization on a membrane filter

This report describes the development of a direct and rapid detection method for the pathogenic protozoan, Cryptosporidium parvum, from environmental water samples using fluorescence in situ hybridization (FISH) on a membrane filter. The hydrophilic polytetrafluoroethylene (PTFE) membrane filter with FISH-stained oocysts yielded the highest signal to noise (S/N) ratio of the different membrane filters tested. PTFE membranes retained 98.8+/-0.4% of the concentrated oocysts after washing, simultaneous permeabilization and fixation with a hot ethanol solution, and hybridization with a fluorescently labeled oligonucleotide probe. This procedure eliminates subsequent time-consuming recovery steps that often result in a loss of the actual oocysts in a given environmental water sample. Furthermore, C. parvum was successfully distinguished from Cryptosporidium muris and other species in environmental water samples with the addition of formamide into the hybridization solution. In tap water samples, the S/N ratio was heightened by washing the membrane filter prior to FISH with a 1 M HCl solution in order to reduce the large amounts of impurities and background fluorescence from the non-specific adsorption of the fluorescently labeled oligonucleotide probe.

Oligonucleotide properties determination and primer designing: a critical examination of predictions

MOTIVATION

Precise prediction of melting temperature (T(m)), secondary structures and design of oligonucleotides determine the efficiency and success of experimentation in molecular biology. Availability of a plethora of software and the users unawareness about their limitations compromises the accuracy and reliability of the predictions.

RESULTS

Comparative analysis of 56 modules was done for T(m) prediction using a large set of oligonucleotide sequences spanning the whole range of GC-content and length. Allawi module of the calculator 'MELTING', Nearest Neighbor (NN) of oligo calculator (McLab), NN of T(m) Calculation for Oligos (Biomath Calculator, Promega) and HYTHER provided the most precise T(m) predictions. A model has also been proposed to calculate the optimum annealing temperature integrating the already reported formulations. Secondary structure predictions of oligonucleotides reveal a large number of structures in contrast to the experimental observations. Of the 11 primer designing tools evaluated, Primer 3 and WebPrimer performed the best for the AT-rich templates, Exon Primer for AT = GC templates, and Primer Design Assistant, Primer3 and Primer Quest for GC-rich templates. This study provides optimal choice for application to the user, increasing the success of a variety of experimentations, especially those that have high-throughput and complex assay designs.

CONTACT

db@igib.res.in

SUPPLEMENTARY INFORMATION

The details of the oligonucleotides and of the different modules of T(m) prediction considered for the study are provided as Supplementary Information, available at Bioinformatics online.

Identification of growth phenotype-related genes in Aspergillus oryzae by heterologous macroarray and suppression subtractive hybridization

Aspergillus oryzae requires polarized growth for colonization of solid substrates, and this growth phenotype differs from that seen in liquid medium. Various experimental approaches were used to identify genes that are differentially expressed when A. oryzae is grown on wheat kernels and in a wheat-based liquid medium. Hybridization of A. oryzae RNAs to a macroarray bearing cDNAs isolated from a library representing at least 16% of the total number of A. niger genes identified 14 differentially expressed cDNA clones, showing that heterologous macroarray analysis with an A. niger cDNA library can be used to identify regulated gene transcripts in the related species A. oryzae. Moreover, Northern analysis with a selection of eight probes for A. niger genes encoding proteins involved in morphological development and cell wall biosynthesis identified five more differentially expressed genes. A suppression subtractive hybridization procedure revealed another 12 differentially expressed genes. The results presented show that, of the 29 identified genes which are expressed at higher levels during growth on wheat kernels, six encode proteins that are functionally related to polarized growth, four encode products known to be involved in morphogenesis, three code for proteins related to cell wall composition, and nine of the cDNA clones encode novel proteins. These findings pinpoint genes associated with the changes in cellular morphogenesis seen in A. oryzae grown on wheat kernels as opposed to wheat-based liquid medium.

Development of a Fast DNA-DNA Hybridization Method Based on Melting Profiles in Microplates

DNA-DNA hybridization is still the "gold standard" for the genotypic delineation of bacterial species. However, it is not widely used because traditional DNA-DNA hybridization techniques are rather time-consuming and not easy to perform in routine laboratories. In the present study, DNA of reference strains was digested with Sau3A, ligated with linker oligonucleotides S1/2 and in vitro amplified. The amplified DNA fragments were immobilized on MaxiSorb 96-well plates. DNA isolated from target strains was also digested with Sau3A, ligated with linker oligonuleotides P1/2 and in vitro amplified in the presence of digoxygenin modified dUTP. The labeled amplificate was hybridized to the immobilized reference DNA under isothermal conditions. Thermal denaturation curves of the DNA-DNA hybrids were obtained by using washing solutions of increasing stringency. Remaining hybrids were colorimetrically detected with anti-digoxygenin-horseradish peroxidase anti-bodies. The new method was validated with strains of the genus Pedioccocus for which DNA-DNA similarities have also been determined by the filter hybridization method. In addition, DNA-DNA hybridizations were performed with genotypically defined Enterobacter species.

Comparison of different melting temperature calculation methods for short DNA sequences

MOTIVATION

The overall performance of several molecular biology techniques involving DNA/DNA hybridization depends on the accurate prediction of the experimental value of a critical parameter: the melting temperature Tm. Till date, many computer software programs based on different methods and/or parameterizations are available for the theoretical estimation of the experimental Tm value of any given short oligonucleotide sequence. However, in most cases, large and significant differences in the estimations of Tm were obtained while using different methods. Thus, it is difficult to decide which Tm value is the accurate one. In addition, it seems that most people who use these methods are unaware about the limitations, which are well described in the literature but not stated properly or restricted the inputs of most of the web servers and standalone software programs that implement them.

RESULTS

A quantitative comparison on the similarities and differences among some of the published DNA/DNA Tm calculation methods is reported. The comparison was carried out for a large set of short oligonucleotide sequences ranging from 16 to 30 nt long, which span the whole range of CG-content. The results showed that significant differences were observed in all the methods, which in some cases depend on the oligonucleotide length and CG-content in a non-trivial manner. Based on these results, the regions of consensus and disagreement for the methods in the oligonucleotide feature space were reported. Owing to the lack of sufficient experimental data, a fair and complete assessment of accuracy for the different methods is not yet possible. Inspite of this limitation, a consensus Tm with minimal error probability was calculated by averaging the values obtained from two or more methods that exhibit similar behavior to each particular combination of oligonucleotide length and CG-content class. Using a total of 348 DNA sequences in the size range between 16mer and 30mer, for which the experimental Tm data are available, we demonstrated that the consensus Tm is a robust and accurate measure. It is expected that the results of this work would be constituted as a useful set of guidelines to be followed for the successful experimental implementation of various molecular biology techniques, such as quantitative PCR, multiplex PCR and the design of optimal DNA microarrays.

Linear-after-the-exponential (LATE)-PCR: an advanced method of asymmetric PCR and its uses in quantitative real-time analysis

Conventional asymmetric PCR is inefficient and difficult to optimize because limiting the concentration of one primer lowers its melting temperature below the reaction annealing temperature. Linear-After-The-Exponential (LATE)-PCR describes a new paradigm for primer design that renders assays as efficient as symmetric PCR assays, regardless of primer ratio. LATE-PCR generates single-stranded products with predictable kinetics for many cycles beyond the exponential phase. LATE-PCR also introduces new probe design criteria that uncouple hybridization probe detection from primer annealing and extension, increase probe reliability, improve allele discrimination, and increase signal strength by 80-250% relative to symmetric PCR. These improvements in PCR are particularly useful for real-time quantitative analysis of target numbers in small samples. LATE-PCR is adaptable to high throughput applications in fields such as clinical diagnostics, biodefense, forensics, and DNA sequencing. We showcase LATE-PCR via amplification of the cystic fibrosis CFDelta508 allele and the Tay-Sachs disease TSD 1278 allele from single heterozygous cells.