Characterization of a DL-dityrosine-containing macromolecule from yeast ascospore walls

Membrane and organelle rearrangement during ascospore formation in budding yeast

SUMMARYIn ascomycete fungi, sexual spores, termed ascospores, are formed after meiosis. Ascospore formation is an unusual cell division in which daughter cells are created within the cytoplasm of the mother cell by de novo generation of membranes that encapsulate each of the haploid chromosome sets created by meiosis. This review describes the molecular events underlying the creation, expansion, and closure of these membranes in the budding yeast, Saccharomyces cerevisiae. Recent advances in our understanding of the regulation of gene expression and the dynamic behavior of different membrane-bound organelles during this process are detailed. While less is known about ascospore formation in other systems, comparison to the distantly related fission yeast suggests that the molecular events will be broadly similar throughout the ascomycetes.

Meiotic Cytokinesis in Saccharomyces cerevisiae: Spores That Just Need Closure

In the budding yeast Saccharomyces cerevisiae, sporulation occurs during starvation of a diploid cell and results in the formation of four haploid spores forming within the mother cell ascus. Meiosis divides the genetic material that is encapsulated by the prospore membrane that grows to surround the haploid nuclei; this membrane will eventually become the plasma membrane of the haploid spore. Cellularization of the spores occurs when the prospore membrane closes to capture the haploid nucleus along with some cytoplasmic material from the mother cell, and thus, closure of the prospore membrane is the meiotic cytokinetic event. This cytokinetic event involves the removal of the leading-edge protein complex, a complex of proteins that localizes to the leading edge of the growing prospore membrane. The development and closure of the prospore membrane must be coordinated with other meiotic exit events such as spindle disassembly. Timing of the closure of the prospore membrane depends on the meiotic exit pathway, which utilizes Cdc15, a Hippo-like kinase, and Sps1, an STE20 family GCKIII kinase, acting in parallel to the E3 ligase Ama1-APC/C. This review describes the sporulation process and focuses on the development of the prospore membrane and the regulation of prospore membrane closure.

Studies on the Proteinaceous Structure Present on the Surface of the Saccharomyces cerevisiae Spore Wall

The surface of the Saccharomyces cerevisiae spore wall exhibits a ridged appearance. The outermost layer of the spore wall is believed to be a dityrosine layer, which is primarily composed of a crosslinked dipeptide bisformyl dityrosine. The dityrosine layer is impervious to protease digestion; indeed, most of bisformyl dityrosine molecules remain in the spore after protease treatment. However, we find that the ridged structure is removed by protease treatment. Thus, a ridged structure is distinct from the dityrosine layer. By proteomic analysis of the spore wall-bound proteins, we found that hydrophilin proteins, including Sip18, its paralog Gre1, and Hsp12, are present in the spore wall. Mutant spores with defective hydrophilin genes exhibit functional and morphological defects in their spore wall, indicating that hydrophilin proteins are required for the proper organization of the ridged and proteinaceous structure. Previously, we found that RNA fragments were attached to the spore wall in a manner dependent on spore wall-bound proteins. Thus, the ridged structure also accommodates RNA fragments. Spore wall-bound RNA molecules function to protect spores from environmental stresses.

Dityrosine cross-linking and its potential roles in Alzheimer's disease

Oxidative stress is a significant source of damage that accumulates during aging and contributes to Alzheimer's disease (AD) pathogenesis. Oxidation of proteins can give rise to covalent links between adjacent tyrosines known as dityrosine (DiY) cross-linking, amongst other modifications, and this observation suggests that DiY could serve as a biomarker of accumulated oxidative stress over the lifespan. Many studies have focused on understanding the contribution of DiY to AD pathogenesis and have revealed that DiY crosslinks can be found in both Aβ and tau deposits - the two key proteins involved in the formation of amyloid plaques and tau tangles, respectively. However, there is no consensus yet in the field on the impact of DiY on Aβ and tau function, aggregation, and toxicity. Here we review the current understanding of the role of DiY on Aβ and tau gathered over the last 20 years since the first observation, and discuss the effect of this modification for Aβ and tau aggregation, and its potential as a biomarker for AD.

A Conserved Machinery Underlies the Synthesis of a Chitosan Layer in the Candida Chlamydospore Cell Wall

The polysaccharide chitosan is found in the cell wall of specific cell types in a variety of fungal species where it contributes to stress resistance, or in pathogenic fungi, virulence. Under certain growth conditions, the pathogenic yeast Candida dubliniensis forms a cell type termed a chlamydospore, which has an additional internal layer in its cell wall compared to hyphal or yeast cell types. We report that this internal layer of the chlamydospore wall is rich in chitosan. The ascospore wall of Saccharomyces cerevisiae also has a distinct chitosan layer. As in S. cerevisiae, formation of the chitosan layer in the C. dubliniensis wall requires the chitin synthase CHS3 and the chitin deacetylase CDA2 In addition, three lipid droplet-localized proteins-Rrt8, Srt1, and Mum3-identified in S. cerevisiae as important for chitosan layer assembly in the ascospore wall are required for the formation of the chitosan layer of the chlamydospore wall in C. dubliniensis These results reveal that a conserved machinery is required for the synthesis of a distinct chitosan layer in the walls of these two yeasts and may be generally important for incorporation of chitosan into fungal walls.IMPORTANCE The cell wall is the interface between the fungal cell and its environment and disruption of cell wall assembly is an effective strategy for antifungal therapies. Therefore, a detailed understanding of how cell walls form is critical to identify potential drug targets and develop therapeutic strategies. This study shows that a set of genes required for the assembly of a chitosan layer in the cell wall of S. cerevisiae is also necessary for chitosan formation in a different cell type in a different yeast, C. dubliniensis Because chitosan incorporation into the cell wall can be important for virulence, the conservation of this pathway suggests possible new targets for antifungals aimed at disrupting cell wall function.

Saccharomyces spores are born prepolarized to outgrow away from spore-spore connections and penetrate the ascus wall

How nonspore haploid Saccharomyces cells choose sites of budding and polarize towards pheromone signals in order to mate has been a subject of intense study. Unlike nonspore haploids, sibling spores produced via meiosis and sporulation by a diploid cell are physically interconnected and encased in a sac derived from the old cell wall of the diploid, called the ascus. Nonspore haploids bud adjacent to previous sites of budding, relying on stable cortical landmarks laid down during prior divisions, but because spore membranes are made de novo, it was assumed that, as is known for fission yeast, Saccharomyces spores break symmetry and polarize at random locations. Here, we show that this assumption is incorrect: Saccharomyces cerevisiae spores are born prepolarized to outgrow, prior to budding or mating, away from interspore bridges. Consequently, when spores bud within an intact ascus, their buds locally penetrate the ascus wall, and when they mate, the resulting zygotes adopt a unique morphology reflective of repolarization towards pheromone. Long-lived cortical foci containing the septin Cdc10 mark polarity sites, but the canonical bud site selection programme is dispensable for spore polarity, thus the origin and molecular composition of these landmarks remain unknown. These findings demand further investigation of previously overlooked mechanisms of polarity establishment and local cell wall digestion and highlight how a key step in the Saccharomyces life cycle has been historically neglected.

Unconventional Constituents and Shared Molecular Architecture of the Melanized Cell Wall of C. neoformans and Spore Wall of S. cerevisiae

The fungal cell wall serves as the interface between the cell and the environment. Fungal cell walls are composed largely of polysaccharides, primarily glucans and chitin, though in many fungi stress-resistant cell types elaborate additional cell wall structures. Here, we use solid-state nuclear magnetic resonance spectroscopy to compare the architecture of cell wall fractions isolated from Saccharomyces cerevisiae spores and Cryptococcus neoformans melanized cells. The specialized cell walls of these two divergent fungi are highly similar in composition. Both use chitosan, the deacetylated derivative of chitin, as a scaffold on which a polyaromatic polymer, dityrosine and melanin, respectively, is assembled. Additionally, we demonstrate that a previously identified but uncharacterized component of the S. cerevisiae spore wall is composed of triglycerides, which are also present in the C. neoformans melanized cell wall. Moreover, we identify a tyrosine-derived constituent in the C. neoformans wall that, although it is not dityrosine, is a non-pigment constituent of the cell wall. The similar composition of the walls of these two phylogenetically distant species suggests that triglycerides, polyaromatics, and chitosan are basic building blocks used to assemble highly stress-resistant cell walls and the use of these constituents may be broadly conserved in other fungal species.

The Fission Yeast RNA-Binding Protein Meu5 Is Involved in Outer Forespore Membrane Breakdown during Spore Formation

In Schizosaccharomyces pombe, the spore wall confers strong resistance against external stress. During meiosis II, the double-layered intracellular forespore membrane (FSM) forms de novo and encapsulates the nucleus. Eventually, the inner FSM layer becomes the plasma membrane of the spore, while the outer layer breaks down. However, the molecular mechanism and biological significance of this membrane breakdown remain unknown. Here, by genetic investigation of an S. pombe mutant (E22) with normal prespore formation but abnormal spores, we showed that Meu5, an RNA-binding protein known to bind to and stabilize more than 80 transcripts, is involved in this process. We confirmed that the E22 mutant does not produce Meu5 protein, while overexpression of meu5⁺ in E22 restores the sporulation defect. Furthermore, electron microscopy revealed that the outer membrane of the FSM persisted in meu5∆ spores. Investigation of the target genes of meu5⁺ showed that a mutant of cyc1⁺ encoding cytochrome c also showed a severe defect in outer FSM breakdown. Lastly, we determined that outer FSM breakdown occurs coincident with or after formation of the outermost Isp3 layer of the spore wall. Collectively, our data provide novel insights into the molecular mechanism of spore formation.

Studies on the Properties of the Sporulation Specific Protein Dit1 and its Product Formyl Tyrosine

The dityrosine layer is a unique structure present in the spore wall of the budding yeast Saccharomyces cerevisiae. The primary constituent of this layer is bisformyl dityrosine. A sporulation-specific protein, Dit1 is localized in the spore cytosol and produces a precursor of bisformyl dityrosine. Although Dit1 is similar to isocyanide synthases, the loss of Dit1 is not rescued by heterologous expression of the Pseudomonas aeruginosa isocyanide synthase, PvcA, indicating that Dit1 does not mediate isocyanidation. The product of Dit1 is most likely formyl tyrosine. Dit1 can produce its product when it is expressed in vegetative cells; however, formyl tyrosine was not detected in the crude cell lysate. We reasoned that formyl tyrosine is unstable and reacts with some molecule to form formyl tyrosine-containing molecules in the cell lysate. In support of this hypothesis, formyl tyrosine was detected when the lysate was hydrolyzed with a mild acid. The same property was also found for bisformyl dityrosine. Bisformyl dityrosine molecules assemble to form the dityrosine layer by an unknown mechanism. Given that bisformyl dityrosine can be released from the spore wall by mild hydrolysis, the process of formyl tyrosine-containing molecule formation may resemble the assembly of the dityrosine layer.

Discovery of High Affinity Receptors for Dityrosine through Inverse Virtual Screening and Docking and Molecular Dynamics

Dityrosine is the product of oxidation that has been linked to a number of serious pathological conditions. Evidence indicates that high amounts of dityrosine exist in oxidized milk powders and some milk related foodstuffs, further reducing the nutritional value of oxidized proteins. Therefore, we hypothesize that some receptors related to special diseases would be targets for dityrosine. However, the mechanisms of the interaction of dityrosine with probable targets are still unknown. In the present work, an inverse virtual screening approach was performed to screen possible novel targets for dityrosine. Molecular docking studies were performed on a panel of targets extracted from the potential drug target database (PDTD) to optimize and validate the screening results. Firstly, two different conformations cis- and trans- were found for dityrosine during minimization. Moreover, Tubulin (αT) (−11.0 kcal/mol) was identified as a target for cis-dityrosine (CDT), targets including αT (−11.2 kcal/mol) and thyroid hormone receptor beta-1 (−10.7 kcal/mol) presented high binding affinities for trans-dityrosine (TDT). Furthermore, in order to provide binding complexes with higher precision, the three docked systems were further refined by performing thermo dynamic simulations. A series of techniques for searching for the most stable binding pose and the calculation of binding free energy are elaborately provided in this work. The major interactions between these targets and dityrosine were hydrophobic, electrostatic and hydrogen bonding. The application of inverse virtual screening method may facilitate the prediction of unknown targets for known ligands, and direct future experimental assays.

Characterization of a yeast sporulation-specific P450 family protein, Dit2, using an in vitro assay to crosslink formyl tyrosine

The outermost layer of the yeast Saccharomyces cerevisiae spore, termed the dityrosine layer, is primarily composed of bisformyl dityrosine. Bisformyl dityrosine is produced in the spore cytosol by crosslinking of two formyl tyrosine molecules, after which it is transported to the nascent spore wall and assembled into the dityrosine layer by an unknown mechanism. A P450 family protein, Dit2, is believed to mediate the crosslinking of bisformyl dityrosine molecules. To characterize Dit2 and gain insight into the biological process of dityrosine layer formation, we performed an in vitro assay to crosslink formyl tyrosine with using permeabilized cells. For an unknown reason, the production of bisformyl dityrosine could not be confirmed under our experimental conditions, but dityrosine was detected in acid hydrolysates of the reaction mixtures in a Dit2 dependent manner. Thus, Dit2 mediated the crosslinking of formyl tyrosine in vitro. Dityrosine was detected when formyl tyrosine, but not tyrosine, was used as a substrate and the reaction required NADPH as a cofactor. Intriguingly, apart from Dit2, we found that the spore wall, but not the vegetative cell wall, contains bisformyl dityrosine crosslinking activity. This activity may be involved in the assembly of the dityrosine layer.

Long-Chain Polyprenols Promote Spore Wall Formation in Saccharomyces cerevisiae

Dolichols are isoprenoid lipids of varying length that act as sugar carriers in glycosylation reactions in the endoplasmic reticulum. In Saccharomyces cerevisiae, there are two cis-prenyltransferases that synthesize polyprenol-an essential precursor to dolichol. These enzymes are heterodimers composed of Nus1 and either Rer2 or Srt1. Rer2-Nus1 and Srt1-Nus1 can both generate dolichol in vegetative cells, but srt1∆ cells grow normally while rer2∆ grows very slowly, indicating that Rer2-Nus1 is the primary enzyme used in mitotically dividing cells. In contrast, SRT1 performs an important function in sporulating cells, where the haploid genomes created by meiosis are packaged into spores. The spore wall is a multilaminar structure and SRT1 is required for the generation of the outer chitosan and dityrosine layers of the spore wall. Srt1 specifically localizes to lipid droplets associated with spore walls, and, during sporulation there is an SRT1-dependent increase in long-chain polyprenols and dolichols in these lipid droplets. Synthesis of chitin by Chs3, the chitin synthase responsible for chitosan layer formation, is dependent on the cis-prenyltransferase activity of Srt1, indicating that polyprenols are necessary to coordinate assembly of the spore wall layers. This work shows that a developmentally regulated cis-prenyltransferase can produce polyprenols that function in cellular processes besides protein glycosylation.

A Novel Assay Reveals a Maturation Process during Ascospore Wall Formation

The ascospore wall of the budding yeast Saccharomyces cerevisiae consists of inner layers of similar composition to the vegetative cell wall and outer layers made of spore-specific components that confer increased stress resistance on the spore. The primary constituents of the outer spore wall are chitosan, dityrosine, and a third component termed Chi that has been identified by spectrometry but whose chemical structure is not known. The lipophilic dye monodansylpentane readily stains lipid droplets inside of newly formed ascospores but, over the course of several days, the spores become impermeable to the dye. The generation of this permeability barrier requires the chitosan layer, but not dityrosine layer, of the spore wall. Screening of a set of mutants with different outer spore wall defects reveals that impermeability to the dye requires not just the presence of chitosan, but another factor as well, possibly Chi, and suggests that the OSW2 gene product is required for synthesis of this factor. Testing of mutants that block synthesis of specific aromatic amino acids indicates that de novo synthesis of tyrosine contributes not only to formation of the dityrosine layer but to impermeability of the wall as well, suggesting a second role for aromatic amino acids in spore wall synthesis.

In vitro reconstitution of the yeast spore wall dityrosine layer discloses the mechanism of its assembly

In response to nutrient starvation, diploid cells of the budding yeast Saccharomyces cerevisiae differentiate into a dormant form of haploid cell termed a spore. The dityrosine layer forms the outermost layer of the wall of S. cerevisiae spores and endows them with resistance to environmental stresses. ll-Bisformyl dityrosine is the main constituent of the dityrosine layer, but the mechanism of its assembly remains elusive. Here, we found that ll-bisformyl dityrosine, but not ll-dityrosine, stably associated in vitro with dit1Δ spores, which lack the dityrosine layer. No other soluble cytosolic materials were required for this incorporation. In several aspects, the dityrosine incorporated in trans resembled the dityrosine layer. For example, dityrosine incorporation obscured access of the dye calcofluor white to the underlying chitosan layer, and ll-bisformyl dityrosine molecules bound to dit1Δ spores were partly isomerized to the dl-form. Mutational analyses revealed several spore wall components required for this binding. One was the chitosan layer located immediately below the dityrosine layer in the spore wall. However, ll-bisformyl dityrosine did not stably bind to chitosan particles, indicating that chitosan is not sufficient for this association. Several lines of evidence demonstrated that spore-resident proteins are involved in the incorporation, including the Lds proteins, which are localized to lipid droplets attached to the developing spore wall. In conclusion, our results provide insight into the mechanism of dityrosine layer formation, and the in vitro assay described here may be used to investigate additional mechanisms in spore wall assembly.

Transcriptome sequencing of Mycosphaerella fijiensis during association with Musa acuminata reveals candidate pathogenicity genes

BACKGROUND

Mycosphaerella fijiensis, causative agent of the black Sigatoka disease of banana, is considered the most economically damaging banana disease. Despite its importance, the genetics of pathogenicity are poorly understood. Previous studies have characterized polyketide pathways with possible roles in pathogenicity. To identify additional candidate pathogenicity genes, we compared the transcriptome of this fungus during the necrotrophic phase of infection with that during saprophytic growth in medium.

RESULTS

Transcriptome analysis was conducted, and the functions of differentially expressed genes were predicted by identifying conserved domains, Gene Ontology (GO) annotation and GO enrichment analysis, Carbohydrate-Active EnZymes (CAZy) annotation, and identification of genes encoding effector-like proteins. The analysis showed that genes commonly involved in secondary metabolism have higher expression in infected leaf tissue, including genes encoding cytochrome P450s, short-chain dehydrogenases, and oxidoreductases in the 2-oxoglutarate and Fe(II)-dependent oxygenase superfamily. Other pathogenicity-related genes with higher expression in infected leaf tissue include genes encoding salicylate hydroxylase-like proteins, hydrophobic surface binding proteins, CFEM domain-containing proteins, and genes encoding secreted cysteine-rich proteins characteristic of effectors. More genes encoding amino acid transporters, oligopeptide transporters, peptidases, proteases, proteinases, sugar transporters, and proteins containing Domain of Unknown Function (DUF) 3328 had higher expression in infected leaf tissue, while more genes encoding inhibitors of peptidases and proteinases had higher expression in medium. Sixteen gene clusters with higher expression in leaf tissue were identified including clusters for the synthesis of a non-ribosomal peptide. A cluster encoding a novel fusicoccane was also identified. Two putative dispensable scaffolds were identified with a large proportion of genes with higher expression in infected leaf tissue, suggesting that they may play a role in pathogenicity. For two other scaffolds, no transcripts were detected in either condition, and PCR assays support the hypothesis that at least one of these scaffolds corresponds to a dispensable chromosome that is not required for survival or pathogenicity.

CONCLUSIONS

Our study revealed major changes in the transcriptome of Mycosphaerella fijiensis, when associating with its host compared to during saprophytic growth in medium. This analysis identified putative pathogenicity genes and also provides support for the existence of dispensable chromosomes in this fungus.

Roles of septins in prospore membrane morphogenesis and spore wall assembly in Saccharomyces cerevisiae

In mitotically dividing cells, septin proteins form cytoskeletal filaments that function in cell morphogenesis and division. Gametogenesis in yeast couples meiosis with a fundamentally different form of cytokinesis involving de novo membrane synthesis. Budding yeast septins are critical for spore membrane extension and wall assembly.

The highly conserved family of septin proteins has important functions in cytokinesis in mitotically proliferating cells. A different form of cytokinesis occurs during gametogenesis in Saccharomyces cerevisiae, in which four haploid meiotic products become encased by prospore membrane (PSMs) and specialized, stress-resistant spore walls. Septins are known to localize in a series of structures near the growing PSM, but previous studies noted only mild sporulation defects upon septin mutation. We report that directed PSM extension fails in many septin-mutant cells, and, for those that do succeed, walls are abnormal, leading to increased susceptibility to heating, freezing, and digestion by the Drosophila gut. Septin mutants mislocalize the leading-edge protein (LEP) complex required for normal PSM and wall biogenesis, and ectopic expression of the LEP protein Ssp1 perturbs mitotic septin localization and function, suggesting a functional interaction. Strikingly, extra copies of septin CDC10 rescue sporulation and LEP localization in cells lacking Sma1, a phospholipase D–associated protein dispensable for initiation of PSM assembly and PSM curvature but required for PSM extension. These findings point to key septin functions in directing efficient membrane and cell wall synthesis during budding yeast gametogenesis.

A highly redundant gene network controls assembly of the outer spore wall in S. cerevisiae

The spore wall of Saccharomyces cerevisiae is a multilaminar extracellular structure that is formed de novo in the course of sporulation. The outer layers of the spore wall provide spores with resistance to a wide variety of environmental stresses. The major components of the outer spore wall are the polysaccharide chitosan and a polymer formed from the di-amino acid dityrosine. Though the synthesis and export pathways for dityrosine have been described, genes directly involved in dityrosine polymerization and incorporation into the spore wall have not been identified. A synthetic gene array approach to identify new genes involved in outer spore wall synthesis revealed an interconnected network influencing dityrosine assembly. This network is highly redundant both for genes of different activities that compensate for the loss of each other and for related genes of overlapping activity. Several of the genes in this network have paralogs in the yeast genome and deletion of entire paralog sets is sufficient to severely reduce dityrosine fluorescence. Solid-state NMR analysis of partially purified outer spore walls identifies a novel component in spore walls from wild type that is absent in some of the paralog set mutants. Localization of gene products identified in the screen reveals an unexpected role for lipid droplets in outer spore wall formation.

The cell wall of fungi is a complex extracellular matrix and an important target for antifungal drugs. Assembly of the wall during spore formation in baker's yeast is a useful model for fungal wall development. The outermost layers of the spore wall are composed of a polymer of dityrosine connected to an underlying polysaccharide layer. The assembly pathway of this dityrosine polymer is not known. Using a genetic approach we reveal a network of genes that function redundantly to control dityrosine layer synthesis. Solid state NMR analysis of spore walls from wild-type and mutant cells reveals a novel constituent of the spore wall that may link the dityrosine to the underlying polysaccharides and a role for lipid droplets in the incorporation of this new component into the spore wall.

Characterization of a (D)-stereoselective aminopeptidase (DamA) exhibiting aminolytic activity and halophilicity from Aspergillus oryzae

β-Aminopeptidases exhibit both hydrolytic and aminolytic (peptide bond formation) activities and have only been reported in bacteria. We identified a gene encoding the β-aminopeptidase homolog from a genome database of the filamentous fungus Aspergillus oryzae. The gene was overexpressed in A. oryzae, and the resulting recombinant enzyme was purified. Apart from bacterial homologs [β-Ala-para-nitroanilide (pNA)], the enzyme preferred D-Leu-pNA and D-Phe-pNA as substrates. Therefore, we designated this gene as d-stereoselective aminopeptidase A (damA). The purified recombinant DamA was estimated to be a hexamer and was composed of two subunits with molecular masses of 29.5 and 11.5 kDa, respectively. Optimal hydrolytic activity of DamA toward D-Leu-pNA was observed at 50 °C and pH 8.0. The enzyme was stable up to 60 °C and from pH 4.0-11.0. DamA also exhibited aminolytic activity, producing D-Leu-D-Leu-NH2 from D-Leu-NH2 as a substrate. In the presence of 3.0 M NaCl, the amount of pNA liberated from D-Leu-pNA by DamA was 3.1-fold higher than that in the absence of NaCl. Thus, DamA is a halophilic enzyme. The enzyme was utilized to synthesize several hetero-dipeptides containing a D-amino acid at the N-terminus as well as physiologically active peptides.

Sporulation in the budding yeast Saccharomyces cerevisiae

In response to nitrogen starvation in the presence of a poor carbon source, diploid cells of the yeast Saccharomyces cerevisiae undergo meiosis and package the haploid nuclei produced in meiosis into spores. The formation of spores requires an unusual cell division event in which daughter cells are formed within the cytoplasm of the mother cell. This process involves the de novo generation of two different cellular structures: novel membrane compartments within the cell cytoplasm that give rise to the spore plasma membrane and an extensive spore wall that protects the spore from environmental insults. This article summarizes what is known about the molecular mechanisms controlling spore assembly with particular attention to how constitutive cellular functions are modified to create novel behaviors during this developmental process. Key regulatory points on the sporulation pathway are also discussed as well as the possible role of sporulation in the natural ecology of S. cerevisiae.

Pichia sorbitophila, an Interspecies Yeast Hybrid, Reveals Early Steps of Genome Resolution After Polyploidization

Polyploidization is an important process in the evolution of eukaryotic genomes, but ensuing molecular mechanisms remain to be clarified. Autopolyploidization or whole-genome duplication events frequently are resolved in resulting lineages by the loss of single genes from most duplicated pairs, causing transient gene dosage imbalance and accelerating speciation through meiotic infertility. Allopolyploidization or formation of interspecies hybrids raises the problem of genetic incompatibility (Bateson-Dobzhansky-Muller effect) and may be resolved by the accumulation of mutational changes in resulting lineages. In this article, we show that an osmotolerant yeast species, Pichia sorbitophila, recently isolated in a concentrated sorbitol solution in industry, illustrates this last situation. Its genome is a mosaic of homologous and homeologous chromosomes, or parts thereof, that corresponds to a recently formed hybrid in the process of evolution. The respective parental contributions to this genome were characterized using existing variations in GC content. The genomic changes that occurred during the short period since hybrid formation were identified (e.g., loss of heterozygosity, unilateral loss of rDNA, reciprocal exchange) and distinguished from those undergone by the two parental genomes after separation from their common ancestor (i.e., NUMT (NUclear sequences of MiTochondrial origin) insertions, gene acquisitions, gene location movements, reciprocal translocation). We found that the physiological characteristics of this new yeast species are determined by specific but unequal contributions of its two parents, one of which could be identified as very closely related to an extant Pichia farinosa strain.

A screen for spore wall permeability mutants identifies a secreted protease required for proper spore wall assembly

The ascospores of Saccharomyces cerevisiae are surrounded by a complex wall that protects the spores from environmental stresses. The outermost layer of the spore wall is composed of a polymer that contains the cross-linked amino acid dityrosine. This dityrosine layer is important for stress resistance of the spore. This work reports that the dityrosine layer acts as a barrier blocking the diffusion of soluble proteins out of the spore wall into the cytoplasm of the ascus. Diffusion of a fluorescent protein out of the spore wall was used as an assay to screen for mutants affecting spore wall permeability. One of the genes identified in this screen, OSW3 (RRT12/YCR045c), encodes a subtilisin-family protease localized to the spore wall. Mutation of the active site serine of Osw3 results in spores with permeable walls, indicating that the catalytic activity of Osw3 is necessary for proper construction of the dityrosine layer. These results indicate that dityrosine promotes stress resistance by acting as a protective shell around the spore. OSW3 and other OSW genes identified in this screen are strong candidates to encode enzymes involved in assembly of this protective dityrosine coat.

Isolation and characterization of Cryptococcus neoformans spores reveal a critical role for capsule biosynthesis genes in spore biogenesis

Spores are essential particles for the survival of many organisms, both prokaryotic and eukaryotic. Among the eukaryotes, fungi have developed spores with superior resistance and dispersal properties. For the human fungal pathogens, however, relatively little is known about the role that spores play in dispersal and infection. Here we present the purification and characterization of spores from the environmental fungus Cryptococcus neoformans. For the first time, we purified spores to homogeneity and assessed their morphological, stress resistance, and surface properties. We found that spores are morphologically distinct from yeast cells and are covered with a thick spore coat. Spores are also more resistant to environmental stresses than yeast cells and display a spore-specific configuration of polysaccharides on their surfaces. Surprisingly, we found that the surface of the spore reacts with antibodies to the polysaccharide glucuronoxylomannan, the most abundant component of the polysaccharide capsule required for C. neoformans virulence. We explored the role of capsule polysaccharide in spore development by assessing spore formation in a series of acapsular strains and determined that capsule biosynthesis genes are required for proper sexual development and normal spore formation. Our findings suggest that C. neoformans spores may have an adapted cell surface that facilitates persistence in harsh environments and ultimately allows them to infect mammalian hosts.

A novel zinc-dependent D-serine dehydratase from Saccharomyces cerevisiae

YGL196W of Saccharomyces cerevisiae encodes a putative protein that is unidentified but is predicted to have a motif similar to that of the N-terminal domain of the bacterial alanine racemase. In the present study we found that YGL196W encodes a novel D-serine dehydratase, which belongs to a different protein family from that of the known bacterial enzyme. The yeast D-serine dehydratase purified from recombinant Escherichia coli cells depends on pyridoxal 5′-phosphate and zinc, and catalyses the conversion of D-serine into pyruvate and ammonia with the Km and kcat values of 0.39 mM and 13.1 s−1 respectively. D-Threonine and β-Cl-D-alanine also serve as substrates with catalytic efficiencies which are approx. 3 and 2% of D-serine respectively. L-Serine, L-threonine and β-Cl-L-alanine are inert as substrates. Atomic absorption analysis revealed that the enzyme contains one zinc atom per enzyme monomer. The enzyme activities toward D-serine and D-threonine were decreased by EDTA treatment and recovered by the addition of Zn2+. Little recovery was observed with Mg2+, Mn2+, Ca2+, Ni2+, Cu2+, K+ or Na+. In contrast, the activity towards β-Cl-D-alanine was retained after EDTA treatment. These results suggest that zinc is involved in the elimination of the hydroxy group of D-serine and D-threonine. D-Serine dehydratase of S. cerevisiae is probably the first example of a eukaryotic D-serine dehydratase and that of a specifically zinc-dependent pyridoxal enzyme as well.

Current analytical methods for the detection of dityrosine, a biomarker of oxidative stress, in biological samples

Dityrosine is a fluorescent molecule formed as a result of normal posttranslational processing. In many structural proteins, dityrosine confers resistance to proteolysis and physicochemical trauma as a stabilizing crosslink. Dityrosine has also been found in oxidative/nitrative stress under a variety of conditions and biological systems. In this regard, it has been used as an important biomarker for oxidatively modified proteins during UV and gamma-irradiation, aging, and exposure to oxygen free radicals, nitrogen dioxide, peroxynitrite, and lipid hydroperoxides. Renewed interest in dityrosine and other tyrosine oxidation products as clinical indicators of oxidative modification has driven the development of important techniques for the specific analysis and quantification of these molecules. The presence of elevated levels of dityrosine in mammalian tissue and urine samples has been measured by chromatographic separation followed by mass spectrometry GC-MS and HPLC-MS/MS. Increases in dityrosine levels have been associated with pathologies such as eye cataracts, atherosclerosis, acute inflammation, and Alzheimer's disease. The continued development of, and increased accessibility to, improved mass spectrometric instrumentation will expand the capability, feasibility, and sensitivity with which specific biomarkers like dityrosine can be measured.

Physiological role of D-amino acid-N-acetyltransferase of Saccharomyces cerevisiae: detoxification of D-amino acids

Saccharomyces cerevisiae is sensitive to D-amino acids: those corresponding to almost all proteinous L-amino acids inhibit the growth of yeast even at low concentrations (e.g. 0.1 mM). We have determined that D-amino acid-N-acetyltransferase (DNT) of the yeast is involved in the detoxification of D-amino acids on the basis of the following findings. When the DNT gene was disrupted, the resulting mutant was far less tolerant to D-amino acids than the wild type. However, when the gene was overexpressed with a vector plasmid p426Gal1 in the wild type or the mutant S. cerevisiae as a host, the recombinant yeast, which was found to show more than 100 times higher DNT activity than the wild type, was much more tolerant to D-amino acids than the wild type. We further confirmed that, upon cultivation with D-phenylalanine, N-acetyl-D-phenylalanine was accumulated in the culture but not in the wild type and hpa3Delta cells overproducing DNT cells. Thus, D-amino acids are toxic to S. cerevisiae but are detoxified with DNT by N-acetylation preceding removal from yeast cells.

Ascospore formation in the yeast Saccharomyces cerevisiae

Sporulation of the baker's yeast Saccharomyces cerevisiae is a response to nutrient depletion that allows a single diploid cell to give rise to four stress-resistant haploid spores. The formation of these spores requires a coordinated reorganization of cellular architecture. The construction of the spores can be broadly divided into two phases. The first is the generation of new membrane compartments within the cell cytoplasm that ultimately give rise to the spore plasma membranes. Proper assembly and growth of these membranes require modification of aspects of the constitutive secretory pathway and cytoskeleton by sporulation-specific functions. In the second phase, each immature spore becomes surrounded by a multilaminar spore wall that provides resistance to environmental stresses. This review focuses on our current understanding of the cellular rearrangements and the genes required in each of these phases to give rise to a wild-type spore.

Morphogenetic pathway of spore wall assembly in Saccharomyces cerevisiae

The Saccharomyces cerevisiae spore is protected from environmental damage by a multilaminar extracellular matrix, the spore wall, which is assembled de novo during spore formation. A set of mutants defective in spore wall assembly were identified in a screen for mutations causing sensitivity of spores to ether vapor. The spore wall defects in 10 of these mutants have been characterized in a variety of cytological and biochemical assays. Many of the individual mutants are defective in the assembly of specific layers within the spore wall, leading to arrests at discrete stages of assembly. The localization of several of these gene products has been determined and distinguishes between proteins that likely are involved directly in spore wall assembly and probable regulatory proteins. The results demonstrate that spore wall construction involves a series of dependent steps and provide the outline of a morphogenetic pathway for assembly of a complex extracellular structure.

Role of the non-respiratory pathways in the utilization of molecular oxygen by Saccharomyces cerevisiae

Saccharomyces cerevisiae is a facultative anaerobe devoid of mitochondrial alternative oxidase. In this yeast, the structure and biogenesis of the respiratory chain, on the one hand, and the functional interactions of oxidative phosphorylation with the cellular energetic metabolism, on the other, are well documented. However, to our knowledge, the molecular aspects and the physiological roles of the non-respiratory pathways that utilize molecular oxygen have not yet been reviewed. In this paper, we review the various non-respiratory pathways in a global context of utilization of molecular oxygen in S. cerevisiae. The roles of these pathways are examined as a function of environmental conditions, using either physiological, biochemical or molecular data. Special attention is paid to the characterization of the so-called 'cyanide-resistant respiration' that is induced by respiratory deficiency, catabolic repression and oxygen limitation during growth. Finally, several aspects of oxygen sensing are discussed.

Ady3p links spindle pole body function to spore wall synthesis in Saccharomyces cerevisiae

Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Delta/ady3Delta asci that do form contain fewer than four spores. The sporulation defect in ady3Delta/ady3Delta cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Delta/ady3Delta cells. In mpc70Delta/mpc70Delta cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

Systematic analysis of sporulation phenotypes in 624 non-lethal homozygous deletion strains of Saccharomyces cerevisiae

A new high throughput mutant screening procedure for the detection of sporulation mutants was developed and used to analyse a set of 624 non-lethal homozygous deletion mutants created in the European joint research program EUROFAN. The screening procedure involved determination of LL- and DL-dityrosine, sporulation-specific compounds, which were shown to be robust markers of the extent and arrest stage of sporulation mutants. Secondary screens consisted of light microscopy to detect mature and immature spores and DAPI staining to monitor the progress of meiotic nuclear divisions. We discovered new phenotypic classes of mutants defective in spore wall synthesis that were not discovered by previous screens for sporulation mutants. The genes corresponding to the sporulation mutants fell in several functional classes, some of which were previously unknown to be involved in spore formation. Peroxisomes seem to play a role in spore wall synthesis. Mitochondria play a role in sporulation that is not simply restricted to supply of ATP from respiratory metabolism. The deletion mutants included in the set were functionally unknown at the start of EUROFAN; however, within the last few years the importance to sporulation of some of them was also reported by other authors. Taken together, about 8% of all single gene deletion mutants of non-essential genes of Saccharomyces cerevisiae seem to display a clear and reproducible sporulation phenotype.

Interaction of Knr4 protein, a protein involved in cell wall synthesis, with tyrosine tRNA synthetase encoded by TYS1 in Saccharomyces cerevisiae

The Knr4 protein, known to be involved in the regulation of cell wall assembly in Saccharomyces cerevisiae, strongly interacts with the tyrosine tRNA synthetase protein encoded by TYS1 as demonstrated by the genetic two-hybrid system and a biochemical pull-down experiment using GST--Tys1p fusion. Data reported here raise the possibility that this physical interaction between these proteins is required for dityrosine formation during the sporulation process. In addition, it is shown that the efficiency of spores formation was drastically reduced in diploid cells homozygous for the disruption of KNR4 or for a temperature-sensitive mutation of TYS1, although this effect could be independent of their protein interaction. Altogether, these data provide novel functions of Knr4p and Tys1p to those that were known before.

D-tyrosyl-tRNA(Tyr) metabolism in Saccharomyces cerevisiae

The Saccharomyces cerevisiae YDL219w (DTD1) gene, which codes for an amino acid sequence sharing 34% identity with the Escherichia coli D-Tyr-tRNA(Tyr) deacylase, was cloned, and its product was functionally characterized. Overexpression in the yeast of the DTD1 gene from a multicopy plasmid increased D-Tyr-tRNA(Tyr) deacylase activity in crude extracts by two orders of magnitude. Upon disruption of the chromosomal gene, deacylase activity was decreased by more than 90%, and the sensitivity to D-tyrosine of the growth of S. cerevisiae was exacerbated. The toxicity of D-tyrosine was also enhanced under conditions of nitrogen starvation, which stimulate the uptake of D-amino acids. In relation with these behaviors, the capacity of purified S. cerevisiae tyrosyl-tRNA synthetase to produce D-Tyr-tRNA(Tyr) could be shown. Finally, the phylogenetic distribution of genes homologous to DTD1 was examined in connection with L-tyrosine prototrophy or auxotrophy. In the auxotrophs, DTD1-like genes are systematically absent. In the prototrophs, the putative occurrence of a deacylase is variable. It possibly depends on the L-tyrosine anabolic pathway adopted by the cell.

High copy number suppression of the meiotic arrest caused by a dmc1 mutation: REC114 imposes an early recombination block and RAD54 promotes a DMC1-independent DSB repair pathway

BACKGROUND

DMC1, the meiosis-specific eukaryotic homologue of bacterial recA, is required for completion of meiotic recombination and cell cycle progression past prophase. In a dmc1 mutant, double strand break recombination intermediates accumulate and cells arrest in prophase. We isolated genes which, when present at high copy numbers, suppress the meiotic arrest phenotype conferred by dmc1 mutations.

RESULTS

Among the genes isolated were two which suppress arrest by altering the recombination process. REC114 suppresses formation of double strand break (DSB) recombination intermediates. The low viability of spores produced by dmc1 mutants carrying high copy numbers of REC114 is rescued when reductional segregation is bypassed by mutation of spo13. High copy numbers of RAD54 suppress dmc1 arrest, promote DSB repair, and allow formation of viable spores following reductional segregation. Analysis of the combined effects of a null mutation in RED1, a gene required for meiotic chromosome structure, with null mutations in RAD54 and DMC1 shows that RAD54, while not normally important for repair of DSBs during meiosis, is required for efficient repair of breaks by the intersister recombination pathway that operates in red1 dmc1 double mutants.

CONCLUSIONS

Over-expression of REC114 suppresses meiotic arrest by preventing formation of DSBs. High copy numbers of RAD54 activate a DMC1-independent mechanism that promotes repair of DSBs by homology-mediated recombination. The ability of RAD54 to promote DMC1-independent recombination is proposed to involve suppression of a constraint that normally promotes recombination between homologous chromatids rather than sisters.

Distinct steps in yeast spore morphogenesis require distinct SMK1 MAP kinase thresholds

The SMK1 mitogen-activated protein kinase is required for spore morphogenesis in Saccharomyces cerevisiae. In contrast to the multiple aberrant spore wall assembly patterns seen even within a single smk1 null ascus, different smk1 missense mutants block in a coordinated fashion at intermediate stages. One smk1 mutant forms asci in which the four spores are surrounded only by prospore wall-like structures, while another smk1 mutant forms asci in which the spores are surrounded by inner but not outer spore wall layers. Stepwise increases in gene dosage of a hypomorphic smk1 allele allow for the completion of progressively later morphological and biochemical events and for the acquisition of distinct spore-resistance phenotypes. Furthermore, smk1 allelic spore phenotypes can be recapitulated by reducing wild-type SMK1 expression. The data demonstrate that SMK1 is required for the execution of multiple steps in spore morphogenesis that require increasing thresholds of SMK1 activity. These results suggest that quantitative changes in mitogen-activated protein kinase signaling play a role in coordinating multiple events of a single cellular differentiation program.

SWM1, a developmentally regulated gene, is required for spore wall assembly in Saccharomyces cerevisiae

Meiosis in Saccharomyces cerevisiae is followed by encapsulation of haploid nuclei within multilayered spore walls. Formation of this spore-specific wall requires the coordinated activity of enzymes involved in the biosynthesis of its components. Completion of late events in the sporulation program, leading to spore wall formation, requires the SWM1 gene. SWM1 is expressed at low levels during vegetative growth but its transcription is strongly induced under sporulating conditions, with kinetics similar to those of middle sporulation-specific genes. Homozygous swm1Delta diploids proceed normally through both meiotic divisions but fail to produce mature asci. Consistent with this finding, swm1Delta mutant asci display enhanced sensitivity to enzymatic digestion and heat shock. Deletion of SWM1 specifically affects the expression of mid-late and late sporulation-specific genes. All of the phenotypes observed are similar to those found for the deletion of SPS1 or SMK1, two putative components of a sporulation-specific MAP kinase cascade. However, epistasis analyses indicate that Swm1p does not form part of the Sps1p-Smk1p-MAP kinase pathway. We propose that Swm1p, a nuclear protein, would participate in a different signal transduction pathway that is also required for the coordination of the biochemical and morphological events occurring during the last phase of the sporulation program.

Mitogen-activated protein kinase: conservation of a three-kinase module from yeast to human

Mitogen-activated protein kinases (MAPK) are serine-threonine protein kinases that are activated by diverse stimuli ranging from cytokines, growth factors, neurotransmitters, hormones, cellular stress, and cell adherence. Mitogen-activated protein kinases are expressed in all eukaryotic cells. The basic assembly of MAPK pathways is a three-component module conserved from yeast to humans. The MAPK module includes three kinases that establish a sequential activation pathway comprising a MAPK kinase kinase (MKKK), MAPK kinase (MKK), and MAPK. Currently, there have been 14 MKKK, 7 MKK, and 12 MAPK identified in mammalian cells. The mammalian MAPK can be subdivided into five families: MAPKerk1/2, MAPKp38, MAPKjnk, MAPKerk3/4, and MAPKerk5. Each MAPK family has distinct biological functions. In Saccharomyces cerevisiae, there are five MAPK pathways involved in mating, cell wall remodelling, nutrient deprivation, and responses to stress stimuli such as osmolarity changes. Component members of the yeast pathways have conserved counterparts in mammalian cells. The number of different MKKK in MAPK modules allows for the diversity of inputs capable of activating MAPK pathways. In this review, we define all known MAPK module kinases from yeast to humans, what is known about their regulation, defined MAPK substrates, and the function of MAPK in cell physiology.

Phytopathogenic filamentous (Ashbya, Eremothecium) and dimorphic fungi (Holleya, Nematospora) with needle-shaped ascospores as new members within the Saccharomycetaceae

Phylogenetic relationships between species from the genera Kluyveromyces and Saccharomyces and representatives of the Metschnikowiaceae (Holleya, Metschnikowia, Nematospora) including the two filamentous phytopathogenic fungi Ashbya gossypii and Eremothecium ashbyii were studied by comparing the monosaccharide pattern of purified cell walls, the ubiquinone system, the presence of dityrosine in ascospore walls, and nucleotide sequences of ribosomal DNA (complete 18S rDNA, ITS1 and ITS2 region). Based on sequence information from both ITS regions, the genera Ashbya, Eremothecium, Holleya and Nematospora are closely related and may be placed in a single genus as suggested by Kurtzman (1995; J Industr. Microbiol. 14, 523-530). In a phylogenetic tree derived from the ITS1 and ITS2 region as well as in a tree derived from the complete 18S rDNA gene, the genus Metschnikowia remains distinct. The molecular evidence from ribosomal sequences suggests that morphology and ornamentation of ascospores as well as mycelium formation and fermentation should not be used as differentiating characters in family delimitation. Our data on cell wall sugars, ubiquinone side chains, dityrosine, and ribosomal DNA sequences support the inclusion of plant pathogenic, predominantly filamentous genera like Ashbya and Eremothecium or dimorphic genera like Holleya and Nematospora with needle-shaped ascospores within the family Saccharomycetaceae. After comparison of sequences from the complete genes of the 18S rDNA the genus Kluyveromyces appears heterogeneous. The type species of the genus, K. polysporus is congeneric with the genus Saccharomyces. The data of Cai et al. (1996; Int. J. Syst. Bacteriol. 46, 542-549) and our own data suggest to conserve the genus Kluyveromyces for a clade containing K. marxianius, K. dobzhanskii, K. wickerhamii and K. aestuarii, which again can be included in the family Saccharomycetaceae. The phylogenetic age of the Metschnikowiaceae and Saccharomycetaceae will be discussed in the light of coevolution.

Two sporulation-specific chitin deacetylase-encoding genes are required for the ascospore wall rigidity of Saccharomyces cerevisiae

The formation of the ascospore wall of Saccharomyces cerevisiae requires the coordinate activity of enzymes involved in the biosynthesis of its components such as chitosan, the deacetylated form of chitin. We have cloned the CDA1 and CDA2 genes which together account for the total chitin deacetylase activity of the organism. We have shown that expression of these genes is restricted to a distinct time period during sporulation. The two genes are functionally redundant, each contributing equally to the total chitin deacetylase activity. Diploids disrupted for both genes sporulate as efficiently as wild type cells, and the resulting mutant spores are viable under standard laboratory conditions. However, they fail to emit the natural fluorescence of yeast spores imparted by the dityrosine residues of the outermost ascospore wall layer. Moreover, mutant spores are relatively sensitive to hydrolytic enzymes, ether, and heat shock, a fact that underscores the importance of the CDA genes for the proper formation of the ascospore wall.

N,N'-Bisformyl dityrosine is an in vivo precursor of the yeast ascospore wall

The amino acid, dityrosine, is a major component of the spore wall surface of the yeast Saccharomyces cerevisiae, where it is part of a highly cross-linked macromolecular network of yet unknown chemical structure, consisting mostly of glucosamine, dityrosine and few other amino acids. Biosynthesis of the dityrosine moiety of this network consists of several steps, including the chemical modification of free L-tyrosine and the subsequent oxidative cross-linking of the modified tyrosine residues (catalyzed by a cytochrome P-450), leading to soluble dityrosine-containing spore wall precursors. We isolated, purified and characterized the dityrosine-containing precursor that appears late in spore wall synthesis and that is thought to be directly incorporated into the maturing spore wall. Chemical and spectroscopic analyses showed that this precursor is N,N'-bisformyl dityrosine. In addition, we identified a tyrosine-containing spore wall precursor as N-formyl tyrosine. The elucidation of the chemical structure of soluble spore wall precursors is crucial for the characterization of the function of the enzymes involved in maturation of the spore surface, e.g. by in vitro systems. A dityrosine-containing fragment, which was solubilized from mature spore walls by partial hydrolysis, was identified as N-formyl dityrosine. Mature spore walls contain significant amounts of N-formyl dityrosine and N,N'-bisformyl dityrosine. This supports the assumption that the dityrosine-containing macromolecular network on the spore surface has an unusual, non-peptidic structure.

Molecular basis of cell integrity and morphogenesis in Saccharomyces cerevisiae

In fungi and many other organisms, a thick outer cell wall is responsible for determining the shape of the cell and for maintaining its integrity. The budding yeast Saccharomyces cerevisiae has been a useful model organism for the study of cell wall synthesis, and over the past few decades, many aspects of the composition, structure, and enzymology of the cell wall have been elucidated. The cell wall of budding yeasts is a complex and dynamic structure; its arrangement alters as the cell grows, and its composition changes in response to different environmental conditions and at different times during the yeast life cycle. In the past few years, we have witnessed a profilic genetic and molecular characterization of some key aspects of cell wall polymer synthesis and hydrolysis in the budding yeast. Furthermore, this organism has been the target of numerous recent studies on the topic of morphogenesis, which have had an enormous impact on our understanding of the intracellular events that participate in directed cell wall synthesis. A number of components that direct polarized secretion, including those involved in assembly and organization of the actin cytoskeleton, secretory pathways, and a series of novel signal transduction systems and regulatory components have been identified. Analysis of these different components has suggested pathways by which polarized secretion is directed and controlled. Our aim is to offer an overall view of the current understanding of cell wall dynamics and of the complex network that controls polarized growth at particular stages of the budding yeast cell cycle and life cycle.

SMK1, a developmentally regulated MAP kinase, is required for spore wall assembly in Saccharomyces cerevisiae

Mitogen-activated protein (MAP) kinases comprise a family of conserved, eukaryotic enzymes that mediate responses to a wide variety of extracellular stimuli. In yeast, different signal transduction pathways utilize distinct MAP kinase family members. We have identified a new yeast MAP kinase gene (named SMK1) that is required for the completion of sporulation. Molecular and cytologic markers indicate that meiotic development proceeds normally in homozygous smk1-delta 1 diploids through meiosis II. However, light and electron microscopy show that smk1 asci are defective in organizing spore wall assembly. Consistent with a defect in spore wall assembly, smk1-delta 1 mutant asci display enhanced sensitivities to enzymatic digestion, heat shock, and exposure to ether. SMK1 mRNA, which is not detectable in vegetative cells, is derepressed at least 200-fold just prior to prospore enclosure. We propose that the SMK1 MAP kinase participates in a developmentally regulated signal transduction pathway that coordinates cytodifferentiation events with the transcriptional program.

Mutation of the SPS1-encoded protein kinase of Saccharomyces cerevisiae leads to defects in transcription and morphology during spore formation

During sporulation of Saccharomyces cerevisiae, meiosis is followed by encapsulation of haploid nuclei within multilayered spore walls. Completion of the late events of the sporulation program requires the SPS1 gene. This developmentally regulated gene, which is expressed as cells are nearing the end of meiosis, encodes a protein with homology to serine/threonine protein kinases. The catalytic domain of Sps1 is 44% identical to the kinase domain of yeast Ste20, a protein involved in the pheromone-induced signal transduction pathway. Cells of a MATa/MAT alpha sps1/sps1 strain arrest after meiosis and fail to activate genes that are normally expressed at a late time of sporulation. The mutant cells do not form refractile spores as assessed by phase-contrast microscopy and do not display the natural fluorescence and ether resistance that is characteristic of mature spores. Examination by electron microscopy reveals, however, that prospore-like compartments form in some of the mutant cells. These immature spores lack the cross-linked surface layer that surrounds wild-type spores and are more variable in size and number than are the spores of wild-type cells. Despite their inability to complete spore formation, sps1-arrested cells are able to resume mitotic growth on transfer to rich medium, generating haploid progeny. Our results suggest that the developmentally regulated Sps1 kinase is required for normal progression of transcriptional, biochemical, and morphological events during the later portion of the sporulation program.

The role of dityrosine formation in the crosslinking of CUT-2, the product of a second cuticlin gene of Caenorhabditis elegans

A second cuticlin gene, cut-2, of the nematode Caenorhabditis elegans, has been isolated and its genomic and cDNA sequences determined. The gene codes for a component of cuticlin, the insoluble residue of nematode cuticles. Conceptual translation of cut-2 reveals a 231-amino acid secreted protein which, like CUT-1, begins with a putative signal peptide of 16 residues. The central part of the protein consists of 13 repetitions of a short hydrophobic motif, which is often degenerated with substitutions and deletions. Parts of this motif are present also in CUT-1 (Caenorhabditis elegans) as well as in several protein components of the larval cuticle and of the eggshell layers of various insects (Locusta migratoria, Ceratitis capitata and Drosophila species). These sequence similarities are related to the similar functions of these proteins: they are all components of extracellular insoluble protective layers. Immunolocalisation and transcription analysis suggest that CUT-2 contributes to the cuticles of all larval stages and that it is not stage-specific. Analysis by reverse transcriptase-PCR suggests that it is not stage-specific. Analysis by reverse transcriptase-PCR suggests that transcription is not continuous throughout larval development but occurs in peaks which precede the moults. Dityrosine has been detected in the cuticle of nematodes and of insects; formation of dityrosine bridges may be one of the cross-linking mechanisms contributing to the insolubility of cuticlins. Recombinant, soluble CUT-2 is shown to be an excellent substrate for an in vitro cross-linking reaction, catalysed by horseradish peroxidase in the presence of H2O2, which results in the formation of insoluble, high-molecular weight CUT-2 and of dityrosine.

Use of reporter genes for the isolation and characterisation of different classes of sporulation mutants in the yeast Saccharomyces cerevisiae

Reporter genes consisting of sporulation-specific promoters fused to lacZ were used as markers to monitor the sporulation pathway of the yeast Saccharomyces cerevisiae. Strains transformed with these lacZ gene fusions expressed beta-galactosidase (assayable on plates using the substrate 5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside, X-gal) in a sporulation-dependent manner. Mutagenesis experiments performed on transformed strains resulted in the recovery of a number of novel sporulation mutants. Three classes of mutants were obtained: those which overexpressed the reporter gene under sporulation conditions, those which did not express the gene under any conditions, and those which expressed the gene in vegetative cells not undergoing sporulation. On the basis of the blue colony-colour produced in the presence of X-gal these have been described as superblue, white, and blue vegetative mutants, respectively. These were further characterised using earlier reporter genes and other marker systems. This study established that the multicopy reporter plasmids chosen do not interfere with sporulation; they are valid tools for monitoring the pathway and they provide a way to isolate mutations not readily selected by other markers.

DIT101 (CSD2, CAL1), a cell cycle-regulated yeast gene required for synthesis of chitin in cell walls and chitosan in spore walls

A mutant screen has been designed to isolate mutants in Saccharomyces cerevisiae deficient in spore wall dityrosine. As shown by electron microscopy, most of the mutant spores lacked only the outermost, dityrosine-rich layer of the spore wall. Mutant dit101, however, was additionally lacking the chitosan layer of the spore wall. Chemical measurements showed that this mutant does not synthesize chitosan during sporulation. The mutant spores were viable but sensitive to lytic enzymes (glusulase or zymolyase). Unlike most of the dit-mutants, dit101 did show a distinctive phenotype in vegetative cells: they grew normally but contained very little chitin and were therefore resistant to the toxic chitin-binding dye, Calcofluor White. The cells showed barely detectable staining of the walls with Calcofluor White or primulin. The decrease in the amount of chitin in vegetative cells and the absence of chitosan in spores suggested that the mutant dit101 could be defective in a chitin synthase. Indeed, a genomic yeast clone harboring the gene, CSD2, sharing significant sequence similarity with yeast chitin synthases I and II (C. E. Bulawa (1992), Mol. Cell. Biol. 12, 1764-1776), complemented our mutant and was shown to correspond to the chromosomal locus of dit101. Thus, the mutations dit101 and csd2 (and probably also call; M. H. Valdivieso et al., (1991), J. Cell Biol. 114, 101-109) were shown to be allelic. The gene was mapped to chromosome II and was located about 3 kb distal of GAL1. Using this DNA clone, a transcript of about 3500-4000 nucleotides was detected. Comparing RNA isolated from vegetative cells and from sporulating cells at different times throughout the sporulation process, no significant differences in DIT101 transcript levels could be detected indicating absence of sporulation-specific transcriptional regulation. However, the amount of DIT101 transcript changed significantly at different stages of the mitotic cell cycle, peaking after septum formation, but before cytokinesis. As most of the chitin synthesis of vegetative cells occurs at this stage of the cell division cycle, chitin synthesis mediated by DIT101 could be primarily regulated at the level of transcription in vegetatively growing cells.

Isolation of two developmentally regulated genes involved in spore wall maturation in Saccharomyces cerevisiae

During sporulation of Saccharomyces cerevisiae, the four haploid nuclei generated by meiosis are encapsulated within multilayered spore walls. Taking advantage of the natural fluorescence imparted to yeast spores by the presence of a dityrosine-containing macromolecule in the spore wall, we identified and cloned two genes, termed DIT1 and DIT2, which are required for spore wall maturation. Mutation of these genes has no effect on the efficiency of spore formation or spore viability. The mutant spores, however, fail to accumulate the spore wall-specific dityrosine and lack the outermost layer of the spore wall. The absence of this cross-linked surface layer reduces the resistance of the spores to lytic enzymes, to ether, and to elevated temperature. Expression of the DIT and DIT2 genes is restricted to sporulating cells, with the DIT1 transcripts accumulating at the time of prospore enclosure and just prior to the time of dityrosine biosynthesis. Both genes act in a spore-autonomous manner implying that at least some of the activities responsible for forming the outermost layer of the spore wall reside within the developing spore rather than in the surrounding ascal cytoplasm. As the DIT2 gene product has significant homology with cytochrome P-450s, DIT2 may be responsible for catalyzing the oxidation of tyrosine residues in the formation of dityrosine.