New Au(0) Sols as Precursors for Heterogeneous Liquid-Phase Oxidation Catalysts

Impact of the Experimental Parameters on Catalytic Activity When Preparing Polymer Protected Bimetallic Nanoparticle Catalysts on Activated Carbon

Sol immobilization is used to produce bimetallic catalysts with higher activity to monometallic counterparts for a wide range of environmental and commercial catalytic transformations. Analysis of complementary surface characterization (XPS, Boehm's titration, and zeta potential measurements) was used to elucidate alterations in the surface functionality of two activated carbon supports during acid exposure. When considered in parallel to the experimentally determined electrostatic and conformational changes of the polymer surrounding the nanoparticles, an electrostatic model is proposed describing polymer protected nanoparticle deposition with several polymer-carbon support examples described. Consideration of the electrostatic interactions ensures full deposition of the polymer protected nanoparticles and at the same time influences the structure of the bimetallic nanoparticle immobilized on the support. The normalized activity of AuPd catalysts prepared with 133 ppm H₂SO₄ has a much higher activity for the direct synthesis of hydrogen peroxide compared to catalysts prepared in the absence of acid. Detailed characterization by XPS indicates that the surface becomes enriched in Au in the Au-Pd samples prepared with acid, suggesting an improved dispersion of smaller bimetallic nanoparticles, rich in Au, that are known to be highly active for the direct synthesis reaction. Subsequent microscopy measurements confirmed this hypothesis, with the acid addition catalysts having a mean particle size ∼2 nm smaller than the zero acid counterparts. The addition of acid did not result in a morphology change, and random alloyed bimetallic AuPd nanoparticles were observed in catalysts prepared by sol immobilization in the presence and absence of acid. This work shows that the deposition of polymer protected AuPd nanoparticles onto activated carbon is heavily influenced by the acid addition step in the sol immobilization process. The physicochemical properties of both the polymer and the activated carbon support should be considered when designing a bimetallic nanoparticle catalyst by sol immobilization to ensure the optimum performance of the final catalyst.

Hydroamination of Phenylacetylene with Aniline over Gold Nanoparticles Embedded in the Boron Imidazolate Framework BIF-66 and Zeolitic Imidazolate Framework ZIF-67

The hydroamination of alkynes is an atom-economy process in the organic synthesis for the C-N bond formation, thereby allowing the production of fine chemicals and intermediates. However, direct interaction between alkynes and amines is complicated due to the electron enrichment of both compounds. Therefore, efficient hydroamination catalysts, especially heterogeneous ones, are in great demand. This work aimed at the development of novel heterogeneous catalysts based on zeolite-like metal-organic frameworks for phenylacetylene hydroamination. The sodalite (SOD) type zeolitic imidazolate framework ZIF-67 (Co(meim)₂, meim = 2-methylimidazolate) and boron imidazolate framework BIF-66 ({Co[B(im)₄]₂}_n, im = imidazolate) were studied as the carriers for the gold nanoparticles (Au-NPs). Au-NPs were embedded in the ZIF-67 and BIF-66 matrices by incipient wetness impregnation. Au@ZIF-67 and Au@BIF-66 hybrids were studied for the first time in the liquid phase hydroamination of phenylacetylene with aniline in an air atmosphere and have shown high activity and selectivity in respect to imine in this process. The pronounced impact of the nature of the metal-organic carrier, Au source, and reducing agent on the catalytic performance of the synthesized nanomaterials was found. To the best of our knowledge, it is the first example of using the zeolitic imidazolate framework and boron-imidazolate framework as the components of the gold-containing catalytic systems for the alkyne hydroamination.

Supported Gold Nanoparticles as Catalysts for the Oxidation of Alcohols and Alkanes

Supporting gold nanoparticles have shown to be extremely active for many industrially important reactions, including oxidations. Two representative examples are the oxidation of alcohols and alkanes, that are substrates of industrial interest, but whose oxidation is still challenging. This review deals with these reactions, giving an insight of the first studies performed by gold based catalysts in these reactions and the most recent developments in the field.

In Situ Generated Gold Nanoparticles on Active Carbon as Reusable Highly Efficient Catalysts for a C sp 3 -C sp 3 Stille Coupling

Gold nanoparticle catalysts are important in many industrial production processes. Nevertheless, for traditional C sp 2 -C sp 2 cross-coupling reactions they have been rarely used and Pd catalysts usually give a superior performance. Herein we report that in situ formed gold metal nanoparticles are highly active catalysts for the cross coupling of allylstannanes and activated alkylbromides to form C sp 3 -C sp 3 bonds. Turnover numbers up to 29 000 could be achieved in the presence of active carbon as solid support, which allowed for convenient catalyst recovery and reuse. The present study is a rare case where a gold metal catalyst is superior to Pd catalysts in a cross-coupling reaction of an organic halide and an organometallic reagent.

Morphology-Controlled Versatile One-Pot Synthesis of Hydrophobic Gold Nanodots, Nanobars, Nanorods, and Nanowires and Their Applications in Surface-Enhanced Raman Spectroscopy

Many previously reported syntheses of gold nanoparticles required lengthy reaction times, complicated operations, high temperatures, or multi-step manipulations. In this work, a morphology-controlled versatile one-pot synthesis of hydrophobic gold nanodots, nanobars, nanorods, and nanowires has been developed. A series of gold nanomaterials ranging from round nanodots, short nanobars, and long nanorods to ultrathin and ultralong nanowires (diameter <2 nm, length >2 μm) have been readily prepared by simply adjusting the feeding ratio of chloroauric acid to oleylamine, oleic acid, and triphenylsilane. The silk-like ultralong and ultrathin nanowires were found to have a single crystalline structure and may have significant potential applications in microelectronics and biosensors. Large sizes of gold spherical nanoparticles were obtained from gold nanodots via a seed-mediated growth approach. These nanoparticles and ultralong nanowires showed excellent surface-enhanced Raman scattering (SERS) activity in organic solvents and, therefore, were employed as efficient organic-soluble SERS substrates for the detection of hydrophobic food toxicants, such as 3,4-benzopyrene, and carcinogens, such as benzidine.

Carbon Quantum Dots Prepared with Chitosan for Synthesis of CQDs/AuNPs for Iodine Ions Detection

Water-soluble and reductive carbon quantum dots (CQDs) were fabricated by the hydrothermal carbonization of chitosan. Acting as a reducing agent and stabilizer, the as-prepared CQDs were further used to synthesize gold nanoparticles (AuNPs). This synthetic process was carried out in aqueous solution, which was absolutely "green". Furthermore, the CQDs/AuNPs composite was used to detect iodine ions by the colorimetric method. A color change from pink to colorless was observed with the constant addition of I- ions, accompanied by a decrease in the absorbance of the CQDs/AuNPs composite. According to the absorbance change, a favorable linear relationship was obtained between ΔA and I- concentration in the range of 20⁻140 μM and 140⁻400 μM. The detection limit of iodide ions, depending on the 3δ/slope, was estimated to be 2.3 μM, indicating high sensitivity to the determination of iodide. More importantly, it also showed good selectivity toward I- over other anion ions, and was used for the analysis of salt samples. Moreover, TEM results indicated that I- ions induced the aggregation of CQDs/AuNPs, resulting in changes in color and absorbance.

A versatile sonication-assisted deposition-reduction method for preparing supported metal catalysts for catalytic applications

This work aims to develop a rapid and efficient strategy for preparing supported metal catalysts for catalytic applications. The sonication-assisted reduction-precipitation method was employed to prepare the heterogeneous mono- and bi-metallic catalysts for photocatalytic degradation of methyl orange (MO) and preferential oxidation (PROX) of CO in H₂-rich gas. In general, there are three advantages for the sonication-assisted method as compared with the conventional methods, including high dispersion of metal nanoparticles on the catalyst support, the much higher deposition efficiency (DE) than those of the deposition-precipitation (DP) and co-precipitation (CP) methods, and the very fast preparation, which only lasts 10-20s for the deposition. In the AuPd/TiO₂ catalysts series, the AuPd(3:1)/TiO₂ catalyst is the most active for MO photocatalytic degradation; while for PROX reaction, Ru/TiO₂, Au-Cu/SBA-15 and Pt/γ-Al₂O₃ catalysts are very active, and the last one showed high stability in the lifetime test. The structural characterization revealed that in the AuPd(3:1)/TiO₂ catalyst, Au-Pd alloy particles were formed and a high percentage of Au atoms was located at the surface. Therefore, this sonication-assisted method is efficient and rapid in the preparation of supported metal catalysts with obvious structural characteristics for various catalytic applications.

Bimetallic Nanoparticles as Efficient Catalysts: Facile and Green Microwave Synthesis

This work deals with the development of a green and versatile synthesis of stable mono- and bi-metallic colloids by means of microwave heating and exploiting ecofriendly reagents: water as the solvent, glucose as a mild and non-toxic reducer and polyvinylpirrolidone (PVP) as the chelating agent. Particle size-control, total reaction yield and long-term stability of colloids were achieved with this method of preparation. All of the materials were tested as effective catalysts in the reduction of p-nitrophenol in the presence of NaBH₄ as the probe reaction. A synergistic positive effect of the bimetallic phase was assessed for Au/Cu and Pd/Au alloy nanoparticles, the latter showing the highest catalytic performance. Moreover, monoand bi-metallic colloids were used to prepare TiO₂- and CeO₂-supported catalysts for the liquid phase oxidation of 5-hydroxymethylfufural (HMF) to 2,5-furandicarboxylic acid (FDCA). The use of Au/Cu and Au/Pd bimetallic catalysts led to an increase in FDCA selectivity. Finally, preformed Pd/Cu nanoparticles were incorporated into the structure of MCM-41-silica. The resulting Pd/Cu MCM-41 catalysts were tested in the hydrodechlorination of CF₃OCFClCF₂Cl to CF₃OCF=CF₂. The effect of Cu on the hydrogenating properties of Pd was demonstrated.

Layered sphere-shaped TiO₂ capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO2 nanosphere materials, which were formed by layered deposition of multiple anatase TiO2 nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO2 nanosheet, including crystal steps and edges, thereby fixing the Au-TiO2 perimeter interface. Reactant transfer occurred along the gaps between these TiO2 nanosheet layers and in contact with catalytically active sites at the Au-TiO2 interface. The doped Au induced the formation of oxygen vacancies in the Au-TiO2 interface. Such vacancies are essential for generating active oxygen species (*O(-)) on the TiO2 surface and Ti(3+) ions in bulk TiO2. These ions can then form Ti(3+)-O(-)-Ti(4+) species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO2 samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.

Characterisation of gold catalysts

Au-based catalysts have established a new important field of catalysis, revealing specific properties in terms of both high activity and selectivity for many reactions.

Selective oxidation of n-butanol using gold-palladium supported nanoparticles under base-free conditions

The base-free selective catalytic oxidation of n-butanol by O2 in an aqueous phase has been studied using Au-Pd bimetallic nanoparticles supported on titania. Au-Pd/TiO2 catalysts were prepared by different methods: wet impregnation, physical mixing, deposition-precipitation and sol immobilisation. The sol immobilisation technique, which used polyvinyl alcohol (PVA) as the stabilizing agent, gave the catalyst with the smallest average particle size and the highest stable activity and selectivity towards butyric acid. Increasing the amount of PVA resulted in a decrease in the size of the nanoparticles. However, it also reduced activity by limiting the accessibility of reactants to the active sites. Heating the catalyst to reflux with water at 90 °C for 1 h was the best method to enhance the surface exposure of the nanoparticles without affecting their size, as determined by TEM, X-ray photoelectron spectroscopy and CO chemisorption analysis. This catalyst was not only active and selective towards butyric acid but was also stable under the operating conditions.

Gold Catalysis in the Complete Oxidation or Decomposition of Small Molecule Pollutants

Supported gold catalysts are useful for the elimination of small molecule pollutants at low temperature. Catalytic oxidation and decomposition are ways to eliminate these air pollutants. The complete oxidation of CO, ethylene and formaldehyde to CO2 over supported gold catalysts, which can be achieved at room temperature or lower, has been studied widely and in depth. Some research has focused on the decomposition of ozone, N2O and NO over supported gold catalysts. The mechanism of catalysis by supported gold material has been elucidated for the above mentioned reactions.

Facile synthesis of polystyrene/gold composite particles as a highly active and reusable catalyst for aerobic oxidation of benzyl alcohol in water

Herein is reported a facile synthesis of polystyrene/gold composite particles with high catalytic activity and good reusability for aerobic oxidation of benzyl alcohol under mild conditions.

Gold nanoparticles as electron reservoir redox catalysts for 4-nitrophenol reduction: a strong stereoelectronic ligand influence

Gold nanoparticle-catalyzed p-nitrophenol reduction by NaBH₄ is shown to strongly depend on the stereoelectronic ligand properties involving surface electron reservoirs.

Oxidation of glycerol to glycolate by using supported gold and palladium nanoparticles

Glycolic acid is an important chemical that has uses as a cleaning agent as well as a chemical intermediate. At present glycolic acid is manufactured from either chloroacetic acid or from formaldehyde hydrocyanation, both routes being nongreen and using nonsustainable resources. We investigate the possibility of producing glycolate from the oxidation of glycerol, a sustainable raw material. We show that by using 1 % wt Au/carbon catalysts prepared using a sol-immobilization method glycolate yields of ca. 60 % can be achieved, using hydrogen peroxide as oxidant in an autoclave reactor. We describe and discuss the reaction mechanism and consider the reaction conditions that maximize the formation of glycolate.