Chiral resolution of pantoprazole sodium and related sulfoxides by complex formation with bovine serum albumin in capillary electrophoresis

Introducing of Li2FeMn3O8 /C-C3N4 /IL nanocomposite for electrochemical determination of pantoprazole sodium in real samples

A new electrochemical sensor based on Li₂FeMn₃O₈/C-C₃N₄ (LFMO/CCN)/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode (CPE) has been constructed to measure pantoprazole sodium (PNZS). The electrochemical impedance spectroscopy (EIS) method was employed to evaluate the electrode charge-transfer resistances. Moreover, the differential pulse voltammetry method was used to detect PNZS in phosphate buffer solution (PBS) at pH 7.0. The detection limit of 80.0 × 10^-9 M and 10.9 × 10^-7 M was obtained under optimal conditions in the linear concentration range of PNZS 0.09-100 μM and 100-900 μM. Chronoampermetry technique was utilized to determine the diffusion coefficient (D) of PNZS on the modified electrode surface. The CCN/LFMO/IL/CPE was successfully used to determine PNZS in various drug formulations such as tablets and vials. Finally, simultaneous determination of PNZS and acetaminophen was accomplished with no interference based on the proposed sensor.

Chiral separation in the class of proton pump inhibitors by chromatographic and electromigration techniques: An overview

Proton pump inhibitors (PPIs) are benzimidazole-derivative chiral sulfoxides, frequently used in the treatment of gastric hyperacidity-related disorders. Due to their stereoselective metabolism, the eutomeric forms of PPIs can present a more advantageous pharmacokinetic profile by comparison with the distomers or racemates. Moreover, two representatives of the class are used in therapy both as racemates and as pure enantiomers (esomeprazole, dexlansoprazole). A relatively large number of enantioseparation methods employed for the stereoselective determination of PPIs from pharmaceutical, biological, and environmental matrices were published in the past three decades. The purpose of the current overview is to provide a systematic survey of the available chiral separation methods published since the introduction of PPIs in the therapy up to the present. Analytical and bioanalytical methods using different chromatographic and electromigration techniques reported for the enantioseparation of omeprazole, lansoprazole, pantoprazole, rabeprazole, ilaprazole, and tenatoprazole are included. The analytical conditions of the presented methods are summarized in three comprehensive tables, while a critical discussion of the applied techniques, possible mechanism of enantiorecognition, and future perspectives on the topic are also presented.

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl-ether-β-CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl-ether-β-CD degree of substitution 6.5 and native γ-CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl-ether-β-CD/20 mM γ-CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl-ether-β-CD/30 mM γ-CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S-enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.

Analytical methodologies for the determination of omeprazole: An overview

Omeprazole, a gastric acid pump inhibitor, dose-dependently controls gastric acid secretion; the drug has greater antisecretory activity than histamine H(2)-receptor antagonists. Omeprazole has been determined in formulations and biological fluids by a variety of methods such as spectrophotometry, high-performance liquid chromatography with ultraviolet detection and liquid chromatography coupled with tandem mass spectrometry. The overview includes the most relevant analytical methodologies used in its determination since the origin still today.

Chiral resolution of tryptophan derivatives by CE using canine serum albumin and bovine serum albumin as chiral selectors

This work deals with the application of BSA and canine serum albumin (CSA) for enantioseparation of tryptophan derivatives with CE. The aim of this work was the investigation of the influence of different functional groups of tryptophan derivatives on enantioseparation. CSA as a chiral selector was tested to compare its selector properties with those of BSA. The enantiomers of the tryptophan derivatives were separated by adding BSA or CSA to the BGE. The influence of pH, temperature, BSA and CSA concentration and organic modifiers was investigated. It was found that the stereoselectivity for the different tryptophan derivatives is dependent on the albumin species. It turned out that the different functional groups of the derivatives showed a significant influence on stereoselectivity.

Kinetic Spectrophotometric Analysis of Pantoprazole in Commercial Dosage Forms

A kinetic spectrophotometric method has been developed which is based on the oxidation of pantoprazole with Fe(III) in sulfuric acid medium. Fe(III) subsequently reduces to Fe(II), which is coupled with potassium ferricyanide to form Prussian blue. The reaction is followed spectrophotometrically by measuring the increase in absorbance with time (1-8 min) at 725 nm. The initial rate method is adopted for constructing the calibration graph, which is linear in the concentration range of 5-90 microg ml(-1). The regression analysis yields the calibration equation, nu = 3.467 x 10(-6) + 4.356 x 10(-5)C. The limits of detection and quantitation are 1.46 and 4.43 microg ml(-1), respectively. The proposed method was optimized and validated both statistically and through recovery studies. The experimental true bias of all samples is < +/-2.0%. The method has been successfully applied to the determination of pantoprazole in pharmaceutical preparations.

Reversed-Phase High Performance Liquid Chromatographic Method for the Determination of Lansoprazole, Omeprazole and Pantoprazole Sodium Sesquihydrate in Presence of Their Acid-Induced Degradation Products

A simple sensitive, selective and accurate reversed-phase high performance liquid chromatographic method was developed and validated for the quantitative determination of lansoprazole, omeprazole and pantoprazole sodium sesquishydrate in the presence of their acid-induced degradation products. The three compounds were monitored at 280 nm using Nova-Pak C(18) column and a mobile phase consisting of 0.05 M potassium dihydrogen phosphate : methanol : acetonitrile (5 : 3 : 2 v/v/v). Linearity ranges were 2-20 microg ml(-1), 2-36 microg ml(-1) and 0.5-20 microg ml(-1) for lansoprazole, omeprazole and pantoprazole, respectively. The corresponding recoveries were 100.61+/-0.84%, 100.50+/-0.80% and 99.78+/-0.88%. The minimum detection limits were 0.55, 0.54 and 0.03 microg ml(-1) for lansoprazole, omeprazole and pantoprazole, respectively. The method could be successfully applied to the determination of pure, laboratory prepared mixtures and pharmaceutical dosage forms. The results obtained were compared with the reported methods for lansoprazole and pantoprazole or the official U.S.P method for omeprazole.

Chiral separation of omeprazole and several related benzimidazoles using supercritical fluid chromatography

A study of the enantiomeric separation of omeprazole and several related benzimidazoles, using supercritical fluid chromatography (SFC), on the amylose based column Chiralpak AD is presented in this work. The effect of the organic modifier as well as temperature on the retention and enantioresolution was investigated. Alcohol-type modifiers provided the best results, allowing the enantiomeric separation of all the compounds studied with resolutions that were in most cases higher than 2, and analysis times lower than 10 minutes. An investigation of the temperature effect revealed that the isoelution temperature was below the working temperature range in only two cases, and hence it was better to work at the highest temperature permitted.

Enantiomeric Separation of Basic Drugs with Partially Filled Serum Albumin as Chiral Selector in Capillary Electrophoresis

A reliable method is presented for the chiral separation of three basic drugs (mexiletine, chlorpheniramine and propranolol) with serum albumins (human and porcine, HSA and PSA) as chiral selectors by capillary electrophoresis in combination with the partial filling technique. Based on the systematic optimization of operation variables, the chiral separation of mexiletine, chlorpheniramine and propranolol was achieved in the pH 7.4 phosphate buffer by using HSA, PSA and PSA as selectors, respectively. The chiral recognition ability of HSA and PSA was compared. HSA and PSA show a different chiral recognition ability for each of the three drugs. In addition, the association constants between enantiomeric drugs and proteins were determined to be 2.00 and 3.80 x 10(2) M(-1) for mexiletine and HSA, 0.59 and 1.12 x 10(3) M(-1) for chlorpheniramine and PSA, and 0.87 and 1.42 x 10(3) M(-1) for propranolol and PSA. The method for the chiral separation and determination of association constants possesses the advantages of simple performance, effective avoiding of the interference of the UV detection from protein, and lowering of the reagent consumption.

Differential pulse anodic voltammetric determination of pantoprazole in pharmaceutical dosage forms and human plasma using glassy carbon electrode

Pantoprazole is used as an anti-ulcer drug through inhibition of H(+), K(+)-adenosine 5(')-triphosphatase in gastric parietal cells. It reduces the gastric acid secretion regardless of the nature of stimulation. The use of differential pulse voltammetry for the determination of pantoprazole in pharmaceutical dosage forms and human plasma using a glassy carbon electrode has been examined. The best voltammetric response was reached for a glassy carbon electrode in Britton-Robinson buffer solution of pH 5.0 submitted to a scan rate of 20.0 mVs(-1) and a pulse amplitude of 50.0 mV. This electroanalytical procedure was able to determine pantoprazole in the concentration range 6.0 x 10(-6)-8.0 x 10(-4)M. Precision and accuracy of the developed method was checked with recovery studies. The limit of detection and limit of quantitation were found to be 4.0 x 10(-7) and 9.0 x 10(-7)M, respectively. Rapidity, precision, and good selectivity were also found for the determination of pantoprazole in pharmaceutical dosage forms and human plasma. For comparative purposes high-performance liquid chromatography with a diode array and UV/VIS detection at 290.0 nm determination also was developed.

Square-wave adsorptive cathodic stripping voltammetry of pantoprazole

Adsorption and reduction of pantoprazole were investigated by cyclic and square-wave voltammetry on a hanging mercury drop electrode in Britton-Robinson buffers at pH 2.0-11.0. The reduction process gave rise to a single peak within the entire pH range. Study of the variation of the reduction signal with solution variables such as pH and concentration of pantoprazole and instrumental variables such as accumulation time and potential, frequency, pulse height and pulse amplitude, has resulted in optimization of the reduction signal for analytical purposes. The voltammetric procedure was applied successfully to give a rapid and precise assay of pantoprazole in a tablet dosage form.

First-order UV-derivative spectrophotometry in the analysis of omeprazole and pantoprazole sodium salt and corresponding impurities

The first-order UV-derivative spectrophotometry, applying zero-crossing method was developed for the determination of omeprazole (OM), omeprazole sulphone (OMS), pantoprazole sodium salt (PANa), and N-methylpantoprazole (NPA) in methanol-ammonia 4.0% v/v, where the sufficient spectra resolutions of drug and corresponding impurity were obtained, using the amplitudes 1D(304), 1D(307), 1D(291.5) and 1D(296.5), respectively. Method showed good linearity in the ranges (microg ml(-1)): 1.61-17.2 for OM; 2.15-21.50 for OMS; 2.13-21.30 for PANa and 2.0-20.0 for NPA, accuracy and precision (repeatability and reproducibility). The experimentally determined values of LOD (microg ml(-1)) were 1.126; 0.76; 0.691 and 0.716 for OM, OMS, PANa and NPA, respectively. The obtained values of 2.91% w/w for OMS and 3.58% w/w for NPA in the presence of their parent drug, by applying the method of standard additions, point out the usage of the proposed method in stability studies. Zero-crossing method in the first-order derivative spectrophotometry showed the impurity-drug intermolecular interactions, due to the possible intermolecular hydrogen bonds, confirmed by divergences of experimentally obtained amplitudes for impurities OMS and NPA in comparison to expected values according to regression equations of calibration graphs.

Determination of pantoprazole by adsorptive stripping voltammetry at carbon paste electrode

A voltammetric method was described for the determination of pantoprazole by differential-pulse adsorptive stripping voltammetry at a carbon paste electrode. Accumulation of pantoprazole was found to be optimized in Britton-Robinson buffer (0.04 M, pH 4.0) solution following 5 min accumulation time at open circuit condition. Under optimized conditions, the current showed a linear dependence with concentration in the range 1.0 x 10(-7)-1.0 x 10(-5) M. The detection limit was 2.0 x 10(-8) M. The method was applied successfully for the analysis of pantoprazole in tablet dosage form. The results of accuracy and precision were comparable to those obtained by spectrophotometry.

Recent advances in enantiomer separations by affinity capillary electrophoresis using proteins and peptides

Enantiomer separations by capillary electrophoresis (CE), using proteins as chiral selectors--affinity capillary electrophoresis (ACE) with free solutions and capillary electrochromatography (CEC)--with protein immobilized capillaries, are reviewed. The separation principle, recent advances in this field and some interesting topics are presented. In ACE, various enantiomer separations have been already reported using either plasma proteins or egg white ones. Miscellaneous proteins were also explored in the last few years. On the contrary, only a limited number of enantiomer separations have been successfully achieved in CEC. CEC is not yet mature enough to date, and further investigations, such as efficiency, durability and reproducibility of capillaries, will be necessary for the use of routine analyses. The study of enantioselective drug-protein binding is important in pharmaceutical developments. Some applications including high-performance CE/frontal analysis (HPCE/FA) are introduced in this paper.

New pseudo-stationary phases for electrokinetic capillary chromatography. Complexes between bovine serum albumin and sodium dodecyl sulfate

The complexes formed between a protein (bovine serum albumin, BSA) and a surfactant (sodium dodecyl sulfate, SDS) were studied as separation carriers in electrokinetic chromatography. Selectivities different from those with either SDS or BSA alone in the background electrolyte (BGE) were obtained. Separation performances were demonstrated to be closely related to the type of complex formed, as predicted by the isotherm curve of SDS on BSA. For each composition of background electrolyte, capacity factors and resolutions were calculated. We compared the results with these complexes to electropherograms using BGE containing either BSA or SDS alone. The separation of a mixture of phenols indicate that some compositions of the BSA-SDS complexes are efficient selectors.

Enantiomer separation of drugs by capillary electrophoresis using proteins as chiral selectors

The separation of drug enantiomers using proteins as the chiral selectors in capillary electrophoresis (CE) is considered in this review. The proteins used include albumins such as bovine serum albumin, human serum albumin and serum albumins from other species, glycoproteins such as alpha1-acid glycoprotein, crude ovomucoid, ovoglycoprotein, avidin and riboflavin binding protein, enzymes such as fungal cellulase, cellobiohydrolase I, pepsin and lysozyme and other proteins such as casein, human serum transferrin and ovotransferrin. Protein-based CE is carried out in two modes: in one proteins are immobilized or adsorbed within the capillary, or protein-immobilized silica gels are packed into the capillary (affinity capillary electrochromatography mode), and in the other proteins are dissolved in the running buffer (affinity CE mode). Furthermore, the advantages and limitations of the two modes and the factors affecting the chiral separations of various drugs by protein-based CE are discussed.

Chiral separation of amino acids and peptides by capillary electrophoresis

Chiral separation of amino acids and peptides by capillary electrophoresis (CE) is reviewed regarding the separation principles of different approaches, advantages and limitations, chiral recognition mechanisms and applications. The direct approach details various chiral selectors with an emphasis on cyclodextrins and their derivatives, antibiotics and chiral surfactants as the chiral selectors. The indirect approach deals with various chiral reagents applied for diastereomer formation and types of separation media such as micelles and polymeric pseudo-stationary phases. Many derivatization reagents used for high sensitivity detection of amino acids and peptides are also discussed and their characteristics are summarized in tables. A large number of relevant examples is presented illustrating the current status of enantiomeric and diastereomeric separation of amino acids and peptides. Strategies to enhance the selectivity and optimize separation parameters by the application of experimental designs are described. The reversal of enantiomeric elution order and the effects of organic modifiers on the selectivity are illustrated in both direct and indirect methods. Some applications of chiral amino acid and peptide analysis, in particular, regarding the determination of trace enantiomeric impurities, are given. This review selects more than 200 articles published between 1988 and 1999.

Spectrophotometric methods for the determination of lansoprazole and pantoprazole sodium sesquihydrate

Spectrophotometric procedures for determination of two irreversible proton pump inhibitors, lansoprazole (I) and pantoprazole sodium sesquihydrate (II) are presented. Two methods were based on charge transfer complexation reaction of these drugs, where they act as n-donors, with either pi acceptor 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and with sigma acceptor as iodine. A third method was also investigated depending on ternary complex formation with eosin and copper (II). The colored products were quantified spectrophotometrically using absorption bands at 457 nm for DDQ (method A) at 293 and 359 nm for iodine (method B) and at 549 nm using ternary complex formation (method C), for both drugs. The molar combining ratio and the optimum assay conditions were studied. These methods determined the lansoprazole in concentration ranges from 10 to 90, 1.48 to 6.65 and 3.69 to 16.61 microg ml(-1) with mean percentage recovery 99.63% for DDQ, 99.71%, 99.18% for iodine and 99.76% for ternary complex and with relative standard deviation 0.11, 0.24, 0.13 and 0.36%, respectively. For pantoprazole, the concentration ranges were 10-60, 17.7-141.6 and 4.3-25.9 microg ml(-1) with mean percentage recovery 99.51, 98.97, 99.84 and 99.46% and relative standard deviation 0.53, 1.21, 0.65, 0.81% for the three mentioned methods, respectively. Investigation of the formed complexes was made with respect to its composition, molar ratio of the reaction, association constant K(C)AD, molar absorptivity epsilon(lambda)AD and free energy change deltaG for methods (A) and (B). The proposed methods have been applied successfully to the analysis of the cited drugs either in pure form or in pharmaceutical formulations, with good accuracy and precision, compared statistically with those given by the reported methods. They are recommended for quality control and routine analysis.

Separation of chiral compounds by capillary electrophoresis

This review presents the different chiral selectors used in capillary electrophoresis (CE) for the separation of enantiomers. The use of charged cyclodextrins, crown ethers, polysaccharides, proteins, natural and synthetic micelles, macrocyclic antibiotics and ergot alkaloids is discussed in detail. Neutral native and derivatized cyclodextrins are not treated because several review articles have already been published on this topic. Recent developments like the application of two chiral selectors in the same background electrolyte are highlighted.

Selectivity in capillary electrophoresis: the use of proteins

Proteins, by their very diverse nature, provide a wide variety of options for generating selectivity in capillary electrophoresis (CE). Their use in different modes of CE will be considered in this review. Proteins added in solution to the background electrolyte allow separations to be made in a similar fashion to other electrokinetic chromatography methods, e.g., micellar separations. Alternatively, different immobilization schemes can be used to secure proteins within the capillary; these have included capillary electrochromatography with the protein grafted onto a silica support, or immobilization of the protein within a gel structure. Compounds varying in size from small inorganic ions to biopolymers may be bound by proteins. There is the potential for any sort of intermolecular interaction to play a role in the binding process (e.g., hydrophobic interactions, electrostatic interactions, etc.). Very specific high-affinity binding often occurs, but also there is often weaker, non-selective binding. Frequently the interactions of chiral compounds with proteins are stereoselective. Obtaining chiral selectivity has been one of the main applications of protein selectors in CE, and this use will be emphasized here in a discussion structured by type of protein. As well as utilizing the selectivity of proteins to develop separations, the role of CE in investigating ligand-protein interactions will be emphasized.