Structure and location of gene product 8 in the bacteriophage T4 baseplate

An extensive disulfide bond network prevents tail contraction in Agrobacterium tumefaciens phage Milano

A contractile sheath and rigid tube assembly is a widespread apparatus used by bacteriophages, tailocins, and the bacterial type VI secretion system to penetrate cell membranes. In this mechanism, contraction of an external sheath powers the motion of an inner tube through the membrane. The structure, energetics, and mechanism of the machinery imply rigidity and straightness. The contractile tail of Agrobacterium tumefaciens bacteriophage Milano is flexible and bent to varying degrees, which sets it apart from other contractile tail-like systems. Here, we report structures of the Milano tail including the sheath-tube complex, baseplate, and putative receptor-binding proteins. The flexible-to-rigid transformation of the Milano tail upon contraction can be explained by unique electrostatic properties of the tail tube and sheath. All components of the Milano tail, including sheath subunits, are crosslinked by disulfides, some of which must be reduced for contraction to occur. The putative receptor-binding complex of Milano contains a tailspike, a tail fiber, and at least two small proteins that form a garland around the distal ends of the tailspikes and tail fibers. Despite being flagellotropic, Milano lacks thread-like tail filaments that can wrap around the flagellum, and is thus likely to employ a different binding mechanism.

Structure and transformation of bacteriophage A511 baseplate and tail upon infection of Listeria cells

Contractile injection systems (bacteriophage tails, type VI secretions system, R-type pyocins, etc.) utilize a rigid tube/contractile sheath assembly for breaching the envelope of bacterial and eukaryotic cells. Among contractile injection systems, bacteriophages that infect Gram-positive bacteria represent the least understood members. Here, we describe the structure of Listeria bacteriophage A511 tail in its pre- and post-host attachment states (extended and contracted, respectively) using cryo-electron microscopy, cryo-electron tomography, and X-ray crystallography. We show that the structure of the tube-baseplate complex of A511 is similar to that of phage T4, but the A511 baseplate is decorated with different receptor-binding proteins, which undergo a large structural transformation upon host attachment and switch the symmetry of the baseplate-tail fiber assembly from threefold to sixfold. For the first time under native conditions, we show that contraction of the phage tail sheath assembly starts at the baseplate and propagates through the sheath in a domino-like motion.

Molecular assembly and structure of the bacteriophage T4 tail

The tail of bacteriophage T4 undergoes large structural changes upon infection while delivering the phage genome into the host cell. The baseplate is located at the distal end of the contractile tail and plays a central role in transmitting the signal to the tail sheath that the tailfibers have been adsorbed by a host bacterium. This then triggers the sheath contraction. In order to understand the mechanism of assembly and conformational changes of the baseplate upon infection, we have determined the structure of an in vitro assembled baseplate through the three-dimensional reconstruction of cryo-electron microscopy images to a resolution of 3.8 Å from electron micrographs. The atomic structure was fitted to the baseplate structure before and after sheath contraction in order to elucidate the conformational changes that occur after bacteriophage T4 has attached itself to a cell surface. The structure was also used to investigate the protease digestion of the assembly intermediates and the mutation sites of the tail genes, resulting in a number of phenotypes.

Role of bacteriophage T4 baseplate in regulating assembly and infection

Bacteriophage T4 consists of a head for protecting its genome and a sheathed tail for inserting its genome into a host. The tail terminates with a multiprotein baseplate that changes its conformation from a "high-energy" dome-shaped to a "low-energy" star-shaped structure during infection. Although these two structures represent different minima in the total energy landscape of the baseplate assembly, as the dome-shaped structure readily changes to the star-shaped structure when the virus infects a host bacterium, the dome-shaped structure must have more energy than the star-shaped structure. Here we describe the electron microscopy structure of a 3.3-MDa in vitro-assembled star-shaped baseplate with a resolution of 3.8 Å. This structure, together with other genetic and structural data, shows why the high-energy baseplate is formed in the presence of the central hub and how the baseplate changes to the low-energy structure, via two steps during infection. Thus, the presence of the central hub is required to initiate the assembly of metastable, high-energy structures. If the high-energy structure is formed and stabilized faster than the low-energy structure, there will be insufficient components to assemble the low-energy structure.

Structure of the 3.3MDa, in vitro assembled, hubless bacteriophage T4 baseplate

The bacteriophage T4 baseplate is the control center of the virus, where the recognition of an Escherichiacoli host by the long tail fibers is translated into a signal to initiate infection. The short tail fibers unfold from the baseplate for firm attachment to the host, followed by shrinkage of the tail sheath that causes the tail tube to enter and cross the periplasmic space ending with injection of the genome into the host. During this process, the 6.5MDa baseplate changes its structure from a "dome" shape to a "star" shape. An in vitro assembled hubless baseplate has been crystallized. It consists of six copies of the recombinantly expressed trimeric gene product (gp) 10, monomeric gp7, dimeric gp8, dimeric gp6 and monomeric gp53. The diffraction pattern extends, at most, to 4.0Å resolution. The known partial structures of gp10, gp8, and gp6 and their relative position in the baseplate derived from earlier electron microscopy studies were used for molecular replacement. An electron density map has been calculated based on molecular replacement, single isomorphous replacement with anomalous dispersion data and 2-fold non-crystallographic symmetry averaging between two baseplate wedges in the crystallographic asymmetric unit. The current electron density map indicates that there are structural changes in the gp6, gp8, and gp10 oligomers compared to their structures when separately crystallized. Additional density is also visible corresponding to gp7, gp53 and the unknown parts of gp10 and gp6.

Structure and function of bacteriophage T4

Bacteriophage T4 is the most well-studied member of Myoviridae, the most complex family of tailed phages. T4 assembly is divided into three independent pathways: the head, the tail and the long tail fibers. The prolate head encapsidates a 172 kbp concatemeric dsDNA genome. The 925 Å-long tail is surrounded by the contractile sheath and ends with a hexagonal baseplate. Six long tail fibers are attached to the baseplate's periphery and are the host cell's recognition sensors. The sheath and the baseplate undergo large conformational changes during infection. X-ray crystallography and cryo-electron microscopy have provided structural information on protein-protein and protein-nucleic acid interactions that regulate conformational changes during assembly and infection of Escherichia coli cells.

Tail tip proteins related to bacteriophage λ gpL coordinate an iron-sulfur cluster

The assembly of long non-contractile phage tails begins with the formation of the tail tip complex (TTC). TTCs are multi-functional protein structures that mediate host cell adsorption and genome injection. The TTC of phage λ is assembled from multiple copies of eight different proteins, including gpL. Purified preparations of gpL and several homologues all displayed a distinct reddish color, suggesting the binding of iron by these proteins. Further characterization of the gpL homologue from phage N15, which was most amenable to in vitro analyses, showed that it contains two domains. The C-terminal domain was demonstrated to coordinate an iron-sulfur cluster, providing the first example of a viral structural protein binding to this type of metal group. We characterized the iron-sulfur cluster using inductively coupled plasma-atomic emission spectroscopy, absorbance spectroscopy, and electron paramagnetic resonance spectroscopy and found that it is an oxygen-sensitive [4Fe-4S](2+) cluster. Four highly conserved cysteine residues were shown to be required for coordinating the iron-sulfur cluster, and substitution of any of these Cys residues with Ser or Ala within the context of λ gpL abolished biological activity. These data imply that the intact iron-sulfur cluster is required for function. The presence of four conserved Cys residues in the C-terminal regions of very diverse gpL homologues suggest that utilization of an iron-sulfur cluster is a widespread feature of non-contractile tailed phages that infect Gram-negative bacteria. In addition, this is the first example of a viral structural protein that binds an iron-sulfur cluster.

Structural aspects of the interaction of dairy phages with their host bacteria

Knowledge of phage-host interactions at a fundamental level is central to the design of rational strategies for the development of phage-resistant strains that may be applied in industrial settings. Phages infecting lactic acid bacteria, in particular Lactococcus lactis and Streptococcus thermophilus, negatively impact on dairy fermentation processes with serious economic implications. In recent years a wealth of information on structural protein assembly and topology has become available relating to phages infecting Escherichia coli, Bacillus subtilis and Lactococcus lactis, which act as models for structural analyses of dairy phages. In this review, we explore the role of model tailed phages, such as T4 and SPP1, in advancing our knowledge regarding interactions between dairy phages and their hosts. Furthermore, the potential of currently investigated dairy phages to in turn serve as model systems for this particular group of phages is discussed.

Liposomes containing glucosyl ceramide specifically bind T4 bacteriophage: a self-assembling nanocarrier formulation

A unique formulation is described comprising liposomes containing glucosyl ceramide (GluCer) in the lipid bilayer to which bacteriophage T4 was attached. Binding of the phage T4 did not occur to glycolipids, such as galactosyl ceramide, containing an aldose in which the C-2 or C-4 conformations were not identical to glucose. These results strongly support previous proposals that glucose is a major receptor moiety for T4 binding to Escherichia coli. By using the binding of T4 to liposomal GluCer, we further describe a formulation that can be used as a self-assembling combined antigen and adjuvant carrier. A peptide antigen derived from C-trimer (Ct) of HIV-1 gp41 was fused to the highly antigenic outer capsid protein (Hoc), a nonessential protein of T4 that spontaneously binds to the T4 capsid. This resulted in display of the Ct-Hoc construct on the T4 capsid, and specific binding of a human monoclonal antibody that recognizes a peptide sequence of Ct was demonstrated. Liposomes containing monophosphoryl lipid A (MPLA) have been demonstrated to have potent adjuvant activities for experimental vaccines both in humans and animals, and because of this, mice were immunized with the Ct-Hoc-T4 construct that was bound to liposomes containing both GluCer and MPLA, resulting in the induction of high titers of Ct-specific antibodies. We conclude that liposomes containing both GluCer and MPLA can spontaneously bind to a construct of T4 that displays antigens that spontaneously binds to the capsid of T4 bacteriophage. This formulation could be utilized as an easily manufactured self-assembling antigen and adjuvant carrier.

Sequential assembly of the wedge of the baseplate of phage T4 in the presence and absence of gp11 as monitored by analytical ultracentrifugation

The baseplate wedge of bacteriophage T4 consists of seven gene products, namely, gp11, gp10, gp7, gp8, gp6, gp53, and gp25, which assemble strictly in this order with an exception that gp11 can bind to gp10 at any stage of the assembly. In this study, all the seven corresponding genes are expressed as recombinant proteins and all the possible combinations of the gene products are tested for interactions by analytical ultracentrifugation. No interactions among gene products that violate the strict sequential binding are observed except that gp6, gp53, and gp25 interact with each other weakly, but significantly. However, when gp6 is previously bound to the precursor complex, only gp53 binds to gp6 strongly and then gp25 binds to complete the wedge formation. This result indicates that the strict sequential association is based on the conformational change of the complex upon addition of each gene product. The binding constant between subunits in the intermediate complexes is too high to be measured. In fact, the binding of gp11 to gp10 is so tight that the binding constant could not be determined by trace sedimentation equilibrium. Also, no indication of dissociation of the intermediate complexes is found in sedimentation velocity, which indicates that other subunit interactions in the intermediate complexes are also strong. The 43.7 S complex, which formed upon addition of gp53, is a hexamer of the wedge complex and resembles the star-shaped baseplate. The s-value of the baseplate-like complex decreased to 40.6 S upon association with gp11 in spite of the increased molecular weight, which is reflected in the sharper edges of the baseplate-like structure which would have a higher friction.

Morphogenesis of the T4 tail and tail fibers

Remarkable progress has been made during the past ten years in elucidating the structure of the bacteriophage T4 tail by a combination of three-dimensional image reconstruction from electron micrographs and X-ray crystallography of the components. Partial and complete structures of nine out of twenty tail structural proteins have been determined by X-ray crystallography and have been fitted into the 3D-reconstituted structure of the "extended" tail. The 3D structure of the "contracted" tail was also determined and interpreted in terms of component proteins. Given the pseudo-atomic tail structures both before and after contraction, it is now possible to understand the gross conformational change of the baseplate in terms of the change in the relative positions of the subunit proteins. These studies have explained how the conformational change of the baseplate and contraction of the tail are related to the tail's host cell recognition and membrane penetration function. On the other hand, the baseplate assembly process has been recently reexamined in detail in a precise system involving recombinant proteins (unlike the earlier studies with phage mutants). These experiments showed that the sequential association of the subunits of the baseplate wedge is based on the induced-fit upon association of each subunit. It was also found that, upon association of gp53 (gene product 53), the penultimate subunit of the wedge, six of the wedge intermediates spontaneously associate to form a baseplate-like structure in the absence of the central hub. Structure determination of the rest of the subunits and intermediate complexes and the assembly of the hub still require further study.

The baseplate wedges of bacteriophage T4 spontaneously assemble into hubless baseplate-like structure in vitro

The baseplate of phage T4 is an important model system in viral supramolecular assembly. The baseplate consists of six wedges surrounding the central hub. We report the first successful attempt at complete wedge assembly using an in vitro approach based on recombinant proteins. The cells expressing the individual wedge proteins were mixed in a combinatorial manner and then lysed. Using this approach, we could both reliably isolate the complete wedge along with a series of intermediate complexes as well as determine the exact sequence of assembly. The individual proteins and intermediate complexes at each step of the wedge assembly were successfully purified and characterized by sedimentation velocity and electron microscopy. Although our results mostly confirmed the hypothesized sequential wedge assembly pathway as established using phage mutants, interestingly, we also detected some protein interactions not following the specified order. It was found that association of gene product 53 to the immediate precursor complex induces spontaneous association of the wedges to form a six-fold star-shaped baseplate-like structure in the absence of the hub. The formation of the baseplate-like structure was facilitated by the addition of gene product 25. The complete wedge in the star-shaped supramolecular complex has a structure similar to the baseplate in the expanded "star" conformation found after infection. Based on the results of the present and previous studies, we assume that the strict order of wedge assembly is due to the induced conformational change caused by every new binding event. The significance of a 40-S star-shaped baseplate structure, which was previously reported and was also found in this study, is discussed in the light of a new paradigm for T4 baseplate assembly involving the star-shaped wedge ring and the central hub. Importantly, the methods described in this article suggest a novel methodology for future structural characterization of supramolecular protein assemblies.

Evolution of Lactococcus lactis phages within a cheese factory

We have sequenced the double-stranded DNA genomes of six lactococcal phages (SL4, CB13, CB14, CB19, CB20, and GR7) from the 936 group that were isolated over a 9-year period from whey samples obtained from a Canadian cheese factory. These six phages infected the same two industrial Lactococcus lactis strains out of 30 tested. The CB14 and GR7 genomes were found to be 100% identical even though they were isolated 14 months apart, indicating that a phage can survive in a cheese plant for more than a year. The other four genomes were related but notably different. The length of the genomes varied from 28,144 to 32,182 bp, and they coded for 51 to 55 open reading frames. All five genomes possessed a 3' overhang cos site that was 11 nucleotides long. Several structural proteins were also identified by nano-high-performance liquid chromatography-tandem mass spectrometry, confirming bioinformatic analyses. Comparative analyses suggested that the most recently isolated phages (CB19 and CB20) were derived, in part, from older phage isolates (CB13 and CB14/GR7). The organization of the five distinct genomes was similar to the previously sequenced lactococcal phage genomes of the 936 group, and from these sequences, a core genome was determined for lactococcal phages of the 936 group.

Inference of macromolecular assemblies from crystalline state

We discuss basic physical-chemical principles underlying the formation of stable macromolecular complexes, which in many cases are likely to be the biological units performing a certain physiological function. We also consider available theoretical approaches to the calculation of macromolecular affinity and entropy of complexation. The latter is shown to play an important role and make a major effect on complex size and symmetry. We develop a new method, based on chemical thermodynamics, for automatic detection of macromolecular assemblies in the Protein Data Bank (PDB) entries that are the results of X-ray diffraction experiments. As found, biological units may be recovered at 80-90% success rate, which makes X-ray crystallography an important source of experimental data on macromolecular complexes and protein-protein interactions. The method is implemented as a public WWW service.

DNA packaging and delivery machines in tailed bacteriophages

Several symmetric and asymmetric reconstructions of bacteriophage particles have recently been determined using electron cryo-microscopy and image reconstruction, and X-ray crystal structures of phage particles and particle-associated gene products have also been solved. In the past two years, the asymmetric structures of four different phages, T7, epsilon15, P22 and phi29, were determined at resolutions sufficient to visualize details of the machinery for DNA packaging and delivery, as well as the organization of the double-stranded DNA within the particles. Invariably, the portals, through which DNA enters and leaves the particle, have 12-fold symmetry, occupy a pentavalent site in the capsid and, along with tail machine accessory proteins attached to it, are fixed in a specific orientation relative to the rest of the capsid.

From structure of the complex to understanding of the biology

The most extensive structural information on viruses relates to apparently icosahedral virions and is based on X-ray crystallography and on cryo-electron microscopy (cryo-EM) single-particle reconstructions. Both techniques lean heavily on imposing icosahedral symmetry, thereby obscuring any deviation from the assumed symmetry. However, tailed bacteriophages have icosahedral or prolate icosahedral heads that have one obvious unique vertex where the genome can enter for DNA packaging and exit when infecting a host cell. The presence of the tail allows cryo-EM reconstructions in which the special vertex is used to orient the head in a unique manner. Some very large dsDNA icosahedral viruses also develop special vertices thought to be required for infecting host cells. Similarly, preliminary cryo-EM data for the small ssDNA canine parvovirus complexed with receptor suggests that these viruses, previously considered to be accurately icosahedral, might have some asymmetric properties that generate one preferred receptor-binding site on the viral surface. Comparisons are made between rhinoviruses that bind receptor molecules uniformly to all 60 equivalent binding sites, canine parvovirus, which appears to have a preferred receptor-binding site, and bacteriophage T4, which gains major biological advantages on account of its unique vertex and tail organelle.

Evolution of Bacteriophage Tails: Structure of T4 Gene Product 10

The success of tailed bacteriophages to infect cells far exceeds that of most other viruses on account of their specialized tail and associated baseplate structures. The baseplate protein gene product (gp) 10 of bacteriophage T4, whose structure was determined to 1.2 A resolution, was fitted into the cryo-electron microscopy structures of the pre and post-infection conformations of the virus. gp10 functions as a molecular lever that rotates and extends the hinged short tail fibers to facilitate cell attachment. The central folding motif of the gp10 trimer is similar to that of the baseplate protein gp11 and to the receptor-binding domain of the short tail fiber, gp12. The three proteins comprise the periphery of the baseplate and interact with each other. The structural and functional similarities of gp10, gp11, and gp12 and their sequential order in the T4 genome suggest that they evolved separately, subsequent to gene triplication from a common ancestor. Such events are usual in the evolution of complex organelles from a common primordial molecule.

Prediction of functional class of novel bacterial proteins without the use of sequence similarity by a statistical learning method

A substantial percentage of the putative protein-encoding open reading frames (ORFs) in bacterial genomes have no homolog of known function, and their function cannot be confidently assigned on the basis of sequence similarity. Methods not based on sequence similarity are needed and being developed. One method, SVMProt (http://jing.cz3.nus.edu.sg/cgi-bin/svmprot.cgi), predicts protein functional family irrespective of sequence similarity (Nucleic Acids Res. 2003;31:3692-3697). While it has been tested on a large number of proteins, its capability for non-homologous proteins has so far been evaluated for a relatively small number of proteins, and additional tests are needed to more fully assess SVMProt. In this work, 90 novel bacterial proteins (non-homologous to known proteins) are used to evaluate the capability of SVMProt. These proteins are such that none of their homologs are in the Swiss-Prot database, their functions not clearly described in the literature, and they themselves and their homologs are not included in the training sets of SVMProt. They represent proteins whose function cannot be confidently predicted by sequence similarity methods at present. The predicted functional class of 76.7% of each of these proteins shows various levels of consistency with the literature-described function, compared to the overall accuracy of 87% for the SVMProt functional class assignment of 34,582 proteins that have at least one homolog of known function. Our study suggests that SVMProt is capable of assigning functional class for novel bacterial proteins at a level not too much lower than that of sequence alignment methods for homologous proteins.

Assembly and infection process of bacteriophage T4

Bacterophage T4 consists of three parts, namely, a head, a tail, and six tail fibers, each of which is assembled along an independent pathway and then joined. In contrast to simple plant viruses such as tobacco mosaic virus, disassembly and reassembly of the virion is not possible. This is due mainly to the fact that the assembly involves not only irreversible steps such as cleavage of covalent bonds of some constituent proteins, but also that it requires a scaffold and involves the inner membrane of the host cell. Another unique feature of the assembly as a biological nanomachine is the involvement of specific protein devices such as a "ruler molecule," which determines the length of the tail, an ATP-driven DNA packaging protein complex, and phage-encoded molecular chaperones. Recent structural biological studies of the phage started to unveil the molecular mechanics of structural transformation of the tail upon infection.

The bacteriophage T4 DNA injection machine

The tail of bacteriophage T4 consists of a contractile sheath surrounding a rigid tube and terminating in a multiprotein baseplate, to which the long and short tail fibers of the phage are attached. Upon binding of the fibers to their cell receptors, the baseplate undergoes a large conformational switch, which initiates sheath contraction and culminates in transfer of the phage DNA from the capsid into the host cell through the tail tube. The baseplate has a dome-shaped sixfold-symmetric structure, which is stabilized by a garland of six short tail fibers, running around the periphery of the dome. In the center of the dome, there is a membrane-puncturing device, containing three lysozyme domains, which disrupts the intermembrane peptidoglycan layer during infection.

Molecular architecture of bacteriophage T4

In studying bacteriophage T4--one of the basic models of molecular biology for several decades--there has come a Renaissance, and this virus is now actively used as object of structural biology. The structures of six proteins of the phage particle have recently been determined at atomic resolution by X-ray crystallography. Three-dimensional reconstruction of the infection device--one of the most complex multiprotein components--has been developed on the basis of cryo-electron microscopy images. The further study of bacteriophage T4 structure will allow a better understanding of the regulation of protein folding, assembly of biological structures, and also mechanisms of functioning of the complex biological molecular machines.

Three-dimensional rearrangement of proteins in the tail of bacteriophage T4 on infection of its host

The contractile tail of bacteriophage T4 undergoes major structural transitions when the virus attaches to the host cell surface. The baseplate at the distal end of the tail changes from a hexagonal to a star shape. This causes the sheath around the tail tube to contract and the tail tube to protrude from the baseplate and pierce the outer cell membrane and the cell wall before reaching the inner cell membrane for subsequent viral DNA injection. Analogously, the T4 tail can be contracted by treatment with 3 M urea. The structure of the T4 contracted tail, including the head-tail joining region, has been determined by cryo-electron microscopy to 17 A resolution. This 1200 A-long, 20 MDa structure has been interpreted in terms of multiple copies of its approximately 20 component proteins. A comparison with the metastable hexagonal baseplate of the mature virus shows that the baseplate proteins move as rigid bodies relative to each other during the structural change.

Molecular architecture of the prolate head of bacteriophage T4

The head of bacteriophage T4 is a prolate icosahedron with one unique portal vertex to which the phage tail is attached. The three-dimensional structure of mature bacteriophage T4 head has been determined to 22-A resolution by using cryo-electron microscopy. The T4 capsid has a hexagonal surface lattice characterized by the triangulation numbers T(end) = 13 laevo for the icosahedral caps and T(mid) = 20 for the midsection. Hexamers of the major capsid protein gene product (gp)23* and pentamers of the vertex protein gp24*, as well as the outer surface proteins highly antigenic outer capsid protein (hoc) and small outer capsid protein (soc), are clearly evident in the reconstruction. The size and shape of the gp23* hexamers are similar to the major capsid protein organization of bacteriophage HK97. The binding sites and shape of the hoc and soc proteins have been established by analysis of the soc(-) and hoc(-)soc(-) T4 structures.

Three-dimensional structure of bacteriophage T4 baseplate

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.