Current perspectives in residual ridge remodeling and its clinical implications: a review

A Soft-Tissue Driven Bone Remodeling Algorithm for Mandibular Residual Ridge Resorption Based on Patient CT Image Data

The role of the biomechanical stimulation generated from soft tissue has not been well quantified or separated from the self-regulated hard tissue remodeling governed by Wolff's Law. Prosthodontic overdentures, commonly used to restore masticatory functions, can cause localized ischemia and inflammation as they often compress patients' oral mucosa and impede local circulation. This biomechanical stimulus in mucosa is found to accelerate the self-regulated residual ridge resorption (RRR), posing ongoing clinical challenges. Based on the dedicated long-term clinical datasets, this work develops an in-silico framework with a combination of techniques, including advanced image post-processing, patient-specific finite element models and unsupervised machine learning Self-Organizing map algorithm, to identify the soft tissue induced RRR and quantitatively elucidate the governing relationship between the RRR and hydrostatic pressure in mucosa. The proposed governing equation has not only enabled a predictive simulation for RRR as showcased in this study, providing a biomechanical basis for optimizing prosthodontic treatments, but also extended the understanding of the mechanobiological responses in the soft-hard tissue interfaces and the role in bone remodeling.

Exploring Genetic Link of Residual Ridge Resorption in Completely Edentulous Individuals: A Prospective Case-Control Clinical Study

BACKGROUND

Residual ridge resorption presents obstacles in prosthodontic treatment, affecting denture stability and the success of dental implants. Genetic elements, specifically the single nucleotide polymorphism (SNP) 1772C>T variant within the hypoxia-inducible factor 1 subunit alpha (HIF-1α) gene, are hypothesized to contribute to residual ridge resorption progression. Nevertheless, its impact remains insufficiently investigated, especially within the context of South Indian populations. We sought to investigate the connection between SNP 1772C>T and residual ridge resorption (RRR) among fully edentulous individuals, considering demographic factors, genotyping methodologies, and statistical evaluations.

METHODS

In a prospective case-control study, we recruited 100 completely edentulous participants from South India. Participants were categorized based on alveolar ridge height. Saliva samples were non-invasively collected for DNA extraction, and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis was employed to determine genotype distribution using the HphI restriction enzyme. The statistical evaluations comprised the utilization of chi-square and Fisher's exact tests.

RESULTS

We observed no significant variations in genotype distributions between the case and control cohorts (CT: p=0.24; CC: p=0.65; TT: p=0.30). The heterozygous genotype CT was prevalent in both groups.

CONCLUSIONS

Although we did not observe significant associations between SNP 1772C>T and RRR, our findings imply a genetic predisposition to residual ridge resorption that warrants further exploration. Variations in genetic susceptibility across ethnicities and the influence of other genetic variants on residual ridge resorption require additional investigation. This study lays the groundwork for personalized prosthodontic care by highlighting the potential of genetic analysis in routine dental practice to improve treatment strategies.

Prevalence of Osteoporosis and Its Effect on Residual Ridge Resorption in Postmenopausal Females of Rural Central Indian Region

AIM

 To determine the correlation between body mass index (BMI), bone mineral density (BMD), and residual ridge resorption (RRR) in postmenopausal females and the effect of osteoporosis on RRR.

MATERIALS AND METHODS

 A study was conducted with 60 postmenopausal female individuals. BMI was calculated using the weight and height of the patient using a formula. BMD was assessed and graded using a T-score. RRR was determined using the Tallgren method.

RESULTS

Most individuals showed a higher BMI (63.33%), which is in the overweight or obese category. BMD was lower in approximately 68.33% of patients, and RRR was significantly higher in about 60% of total patients.

CONCLUSION

The higher the BMI values, the lesser the BMD and the higher the RRR.

Is alveolar ridge preservation an overtreatment?

The morphology and dimensions of the postextraction alveolar ridge are important for the surgical and restorative phases of implant treatment. Adequate new bone formation and preservation of alveolar ridge dimensions following extraction will facilitate installation of the implant in a restorative position, while preservation of soft tissue contour and volume is essential for an aesthetic and implant-supported restoration with healthy peri-implant tissues. Alveolar ridge preservation (ARP) refers to any procedure that aims to: (i) limit dimensional changes in the alveolar ridge after extraction facilitating implant placement without additional extensive bone and soft tissue augmentation procedures (ii) promote new bone formation in the healing alveolus, and (iii) promote soft tissue healing at the entrance of the alveolus and preserve the alveolar ridge contour. Although ARP is a clinically validated and safe approach, in certain clinical scenarios, the additional clinical benefit of ARP over unassisted socket healing has been debated and it appears that for some clinicians may represent an overtreatment. The aim of this critical review was to discuss the evidence pertaining to the four key objectives of ARP and to determine where ARP can lead to favorable outcomes when compared to unassisted socket healing.

Current Knowledge on the Healing of the Extraction Socket: A Narrative Review

The concept of extraction socket healing has been severally researched and reported over the years, since tooth extraction remains one of the most common procedures performed in the dental clinic. Understanding this healing process is of utmost importance because the outcome has a direct bearing on future prosthetic rehabilitation and, by extension, on patients' esthetics and masticatory function, among others. This mini review, therefore, summarized the current knowledge on the different stages of socket healing, including the biologic and clinical events that occur following tooth extraction up until the complete closure of the socket. Additionally, the modeling of the alveolar bone/process post extraction, and the resultant dimensional changes that, altogether, shape the bone, were reviewed and documented. The effects of various socket preservation interventions to mitigate these dimensional changes, and therefore preserve the alveolar process in a condition suitable for future prosthetic rehabilitation, were highlighted. Finally, a review of some of the factors that influence the entire process was also carried out.

Evaluation of the osteoconductive properties of scaffold containing platete-enriched-fibrin (PRF) with three calcium phosphate (TCP) in the alveolar socket repair after tooth extraction: An animal study

Bone regeneration can be accomplished through osteogenesis, osteoinduction, and osteoconduction mechanisms. This study aimed to investigate the properties of the PRF scaffold with tricalcium phosphate nanoparticles in socket preservation in an animal model. Fabrication of PRF performed. In this experimental study, 18 rats were divided into three negative control, PRF, and PRF/TCP groups. The mechanical and chemical tests including swelling rate, degradation time, and MTT tests were applied to the scaffolds. In each animal, the first maxillary right molar was extracted, and extraction sites of test groups were filled with a resorbable biocompatible biomaterial in situ hardening bone substitute. After 2 and 4 weeks all animals were sacrificed and examined histopathologically and with qRT-PCR. Histological results showed TCP in combination with PRF accelerates bone regeneration with the highest amount of lamellar bone and collagen formation compared to the control and PRF alone. Mechanical and chemical tests on the scaffolds showed the addition of TCP to the PRF scaffold decreases the swelling rate and increases the degradation time. qRT-PCR showed expression of osteogenic genes increased significantly (p < 0.05) in PRF/TCP and PRF, respectively. In conclusion, the gelatin hydrogel containing PRF/TCP scaffold led to more bone formation after tooth extraction. Therefore, the injectable PRF\TCP hydrogel is a promising candidate for bone repair and regeneration.

Narrow Alveolar Ridge Management with Modified Ridge Splitting Technique: A Report of 3 Cases

Purpose. In this study, we report the usefulness of implant placement with modified ridge splitting technique from three cases of patients with narrow alveolar ridge. Materials and Methods. Three patients were those who visited the Department of Oral and Maxillofacial Surgery of Ewha Medical Center for consultation regarding implant placement. Through clinical and radiographic evaluation, narrowed alveolar ridge after tooth loss was confirmed in all three patients. For them, it was necessary to use the modified ridge split technique with bone augmentation for the implant to be well placed with enough bone width. Results. In all cases, sufficient bone width was confirmed for implant placement, and bone volume was well maintained after prosthetic restoration without any complications. Initial width of alveolar bone was 4.9 mm on average and was well maintained at an average of 7.6  mm at 1-year follow-up after implant installation. Conclusion. Although the number of subjects in this case report was small and was done by only one surgeon, we suggest that modified ridge splitting technique might be a useful surgical method to enhance narrow edentulous alveolar ridges and enable successful implant placement with shorter healing period compared with single guided bone regeneration.

Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla

STATEMENT OF PROBLEM

Stresses applied to zygomatic implants have been determined to be transferred mainly to the zygomatic bone; however, consensus regarding the stress distribution pattern in the bone surrounding zygomatic implants has not yet been reached.

PURPOSE

The purpose of this 3-dimensional (3D) finite element analysis (FEA) study was to visually compare the stress distribution pattern in 2 different zygomatic implant treatment modalities and evaluate the effect of masseter musculature involvement.

MATERIAL AND METHODS

A 3D FEA craniofacial model was constructed from the computed tomography (CT) data of a selected patient with a severely atrophic edentulous maxilla. Modeled zygomatic and conventional implants were inserted into the craniofacial model supporting a prosthesis superstructure. Two types of treatment were considered in the study: 2 zygomatic implants placed bilaterally or 2 zygomatic implants placed in conjunction with at least 2 conventional implants at the anterior maxilla. The models were loaded with a vertical force of 150 N, a lateral force of 50 N, and a distributed occlusal force of 300 N applied to the insertion area of the masseter muscle. The stresses on and deformations of the bones and implants were then observed and compared with and without the involvement of the musculature component.

RESULTS

The stresses were distributed efficiently along the vertical and horizontal facial buttresses, as in the dentate skull; however, a difference in distribution pattern was observed when the models were loaded without applying the muscle component. The maximum deformation of bones surrounding the implants occurred in the abutment connection of the conventional anterior implant in the model with an additional conventional anterior implant.

CONCLUSIONS

The FEA revealed the stresses were distributed efficiently along the vertical and horizontal facial buttresses, as in the dentate skull. However, the stresses in both models were concentrated in the zygomatic bone when incorporating the muscle component. Therefore, incorporating muscular force into FEA studies could affect the analysis result.

Cyclic pressure-induced cytokines from gingival fibroblasts stimulate osteoclast activity: Clinical implications for alveolar bone loss in denture wearers

Purpose The involvement of oral mucosa cells in mechanical stress-induced bone resorption is unclear. The aim of this study was to investigate the effects of cyclic pressure-induced cytokines from oral mucosal cells (human gingival fibroblasts: hGFs) on osteoclast activity in vitro.Methods Cyclic pressure at 50 kPa, which represents high physiologic occlusal force of dentures on the molar area, was applied to hGFs. NFAT-reporter stable RAW264.7 preosteoclasts (NFAT/Luc-RAW cells) were cultured in conditioned medium collected from hGF cultures under cyclic pressure or static conditions. NFAT activity and osteoclast formation were determined by luciferase reporter assay and TRAP staining, respectively. Cyclic pressure-induced cytokines in hGF culture were detected by ELISA, real-time RT-PCR, and cytokine array analyses.Results Conditioned media from hGFs treated with 48 hours of cyclic pressure significantly induced NFAT activity and increased multinucleated osteoclast formation. Furthermore, the cyclic pressure significantly increased the bone resorption activity of RAW264.7 cells. Cyclic pressure significantly increased the expression of major inflammatory cytokines including IL-1β/IL-1β, IL-6/IL-6, IL-8/IL-8 and MCP-1/CCL2 in hGFs compared to hGFs cultured under static conditions, and it suppressed osteoprotegerin (OPG/OPG) expression. A cytokine array detected 12 cyclic pressure-induced candidates. Among them, IL-8, decorin, MCP-1 and ferritin increased, whereas IL-28A and PDGF-BB decreased, NFAT activation of NFAT/Luc-RAW cells.Conclusions These results suggest that cyclic pressure-induced cytokines from hGFs promote osteoclastogenesis, possibly including up-regulation of IL-1β, IL-6, IL-8 and MCP-1, and down-regulation of OPG. These findings introduce the possible involvement of GFs in mechanical stress-induced alveolar ridge resorption, such as in denture wearers.

Current perspectives of residual ridge resorption: Pathological activation of oral barrier osteoclasts

PURPOSE

Tooth extraction is a last resort treatment for resolving pathological complications of dentition induced by infection and injury. Although the extraction wound generally heals uneventfully, resulting in the formation of an edentulous residual ridge, some patients experience long-term and severe residual ridge reduction. The objective of this review was to provide a contemporary understanding of the molecular and cellular mechanisms that may potentially cause edentulous jawbone resorption.

STUDY SELECTION

Clinical, in vivo, and in vitro studies related to the characterization of and cellular and molecular mechanisms leading to residual ridge resorption.

RESULTS

The alveolar processes of the maxillary and mandibular bones uniquely juxtapose the gingival tissue. The gingival oral mucosa is an active barrier tissue that maintains homeostasis of the internal organs through its unique barrier immunity. Tooth extraction not only generates a bony socket but also injures oral barrier tissue. In response to wounding, the alveolar bone socket initiates regeneration and remodeling through coupled bone formation and osteoclastic resorption. Osteoclasts are also found on the external surface of the alveolar bone, interfacing the oral barrier tissue. Osteoclasts in the oral barrier region are not coupled with osteoblastic bone formation and often remain active long after the completion of wound healing, leading to a net decrease in the alveolar bone structure.

CONCLUSIONS

The novel concept of oral barrier osteoclasts may provide important clues for future clinical strategies to maintain residual ridges for successful prosthodontic and restorative therapies.

The Effect of General Bone Mineral Density on the Quantity and Quality of the Edentulous Mandible: A Cross-Sectional Clinical Study

BACKGROUND

Osteoporosis is a disease which is characterized by a decrease in general bone mineral density (BMD), resulting in decreased bone strength and an increased risk of bone fractures. The effect of reduced BMD on the jawbones is still not fully understood. The purpose of the study was to evaluate the impact of BMD on the quality and quantity of the edentulous mandible.

METHODS

The present study included 127 edentulous postmenopausal women who underwent cone beam computed tomography (CBCT) examinations. BMD measurements of the lumbar spine and femoral necks were performed by dual-energy X-ray absorptiometry. In the cross-sectional CBCT images, three different areas of the mandible (lateral incisor, first premolar, and first molar) were selected. The complete mandibular, trabecular, and cortical bone volumes were measured. All measurements were performed on the total mandibular area, and the basal and alveolar parts of the mandible.

RESULTS

The volume of the cortical bone was reduced for females with reduced BMD in the lateral incisor and first premolar regions, both in the total mandibular area and in the basal part of the mandible. The trabecular bone volume statistically significantly increased when the BMD decreased in the complete mandibular area and the basal part of the mandible (linear regression). The total bone volume significantly decreased with a decrease in BMD in the basal part of the mandible.

CONCLUSIONS

Reduced BMD has a negative effect on the quantity and quality of bone in the basal part of the edentulous mandible.

Unravelling Alveolar Bone Regeneration Ability of Platelet-Rich Plasma: A Systematic Review with Meta-Analysis

Background: This systematic review aims to evaluate the efficacy of the available platelet-rich plasma (PRP) products and composition to regenerate alveolar bone after tooth extraction. Methods: PubMed, Cochrane Central Register of Controlled Trials, and EBSCO databases were searched up to 2 July 2021. Only randomized clinical trials using leukocyte-rich plasma (L-PRP) or pure-platelet rich plasma (P-PRP) for bone regeneration in alveolar ridge preservation were selected. The following outcomes were considered: (1) new bone formation (primary outcome) and (2) bone density (secondary outcome). A meta-analysis for PRP, P-PRP, and L-PRP using a fixed effect model was performed with Review Manager 5.4 software. Overall evidence was qualified using GRADE. Results: Six randomized clinical trials from 2639 unique articles initially identified met the inclusion criteria. The meta-analysis showed a significant effect of the P-PRP on the outcome of new bone formation (SMD, 1.44; 95% CI, 0.84 to 2.03) for P-PRP treatment. No information was retrieved for L-PRP. A statistically significant difference was also observed in the P-PRP group for bone density outcome (SMD, 1.24; 95% CI, 0.81 to 1.68). The L-PRP treated sockets also showed higher bone density (SMD, 0.88; 95% CI, 0.31 to 1.45) in comparison to control sockets. The quality of evidence was moderate for both outcomes in the P-PRP group and low for the L-PRP group. Conclusions: Despite the limitations of the included studies, our data suggest that P-PRP, in comparison to unassisted healing, can improve alveolar bone regenerative potential. However, more high-quality clinical studies are needed.

Influence of dental implantation on bone mineral density distribution: a pilot study

PURPOSE

Masticatory loading triggers active bone remodeling, altering alveolar bone mineral density (BMD). While dental implants are placed to bear masticatory loading, their influence on changing bone properties has not been fully investigated. Objective of this pilot study was to examine whether the dental implantation has an effect on BMD distribution of bone by comparing dentate, edentulous, and edentulous patients with implants.

MATERIALS AND METHODS

Cone beam computed tomography (CBCT) images of 19 partially edentulous patients (Dent), 19 edentulous patients (Edent), and 16 edentulous patients who received implants in the mandible (Edent+Im), were obtained. CBCT images were also obtained from 5 patients within Edent+Im group, before implant placement and after implant loading. Basal cortical bone region of the mandible was digitally isolated. A histogram of gray levels proportional to BMD was obtained to assess mean, histogram standard deviation (HSD), fifth percentile of low and high values (Low₅ and High₅) of the BMD distribution. Multivariate analysis of variance and paired t-test were used to compare the BMD parameters among the 3 dental status groups and between pre- and post-implantation, respectively.

RESULTS

Edentulous patients with implants had significantly greater HSD and High₅ values compared to edentulous patients (P < .013). All other comparisons were not significant (P > .097). Mean, HSD, and High₅ values significantly increased after receiving implants (P < .022).

CONCLUSION

The current findings suggested that receiving dental implants promoted oral bone mineralization for edentulous patients. The longitudinal investigation could provide valuable information on understanding the effects of implantation on the behavior of oral bone quality.

Genetic Impact on Bone Modulation-A Review Bridging Bioscience to Genetic Engineering

Genes control approximately 60% to 75% of the variance of peak bone mass/density and a much smaller amount of variance in rate of loss.

Bone mass increases during growth to a peak value and soon after begins to decline. Most of the genetic effect is exerted during growth and so influences peak bone mass; whether there is an additional genetic effect on the rate of bone loss is less clear. So, this article aims to place emphasis on various oral and systemic conditions that are manifested due to altered gene function. Genetic polymorphisms and mutations are simple, although the consequences of the mechanism are complex. The syndromic manifestation due to changes at genetic level will greatly affect the bone quality, which will ultimately affect any treatment prognosis. Hence, a better understanding of molecular mechanisms of bone remodeling helps to identify pathogenic causes of bone, skeletal diseases, and leads to the development of targeted therapies for these diseases. This review highlights notions on the connecting link between science and genetics as well as various oral scenarios where gene could bring about changes, resulting in deformities. There is an intense research awaited in the future which could intervene with the causes that bring about genetic modulations, so as to decrease the mortality rate of humans.

Case Report: Histological and Histomorphometrical Results of a 3-D Printed Biphasic Calcium Phosphate Ceramic 7 Years After Insertion in a Human Maxillary Alveolar Ridge

Introduction: Dental implant placement can be challenging when insufficient bone volume is present and bone augmentation procedures are indicated. The purpose was to assess clinically and histologically a specimen of 30%HA-60%β-TCP BCP 3D-printed scaffold, after 7-years.

Case Description: The patient underwent bone regeneration of maxillary buccal plate with 3D-printed biphasic-HA block in 2013. After 7-years, a specimen of the regenerated bone was harvested and processed to perform microCT and histomorphometrical analyses.

Results: The microarchitecture study performed by microCT in the test-biopsy showed that biomaterial volume decreased more than 23% and that newly-formed bone volume represented more than 57% of the overall mineralized tissue. Comparing with unloaded controls or peri-dental bone, Test-sample appeared much more mineralized and bulky. Histological evaluation showed complete integration of the scaffold and signs of particles degradation. The percentage of bone, biomaterials and soft tissues was, respectively, 59.2, 25.6, and 15.2%. Under polarized light microscopy, the biomaterial was surrounded by lamellar bone. These results indicate that, while unloaded jaws mimicked the typical osteoporotic microarchitecture after 1-year without loading, the BCP helped to preserve a correct microarchitecture after 7-years.

Conclusions: BCP 3D-printed scaffolds represent a suitable solution for bone regeneration: they can lead to straightforward and less time-consuming surgery, and to bone preservation.

A retrospective cohort study of how alveolar ridge preservation affects the need of alveolar ridge augmentation at posterior tooth implant sites

Objectives

The aim of this study was to assess whether alveolar ridge preservation (ARP) can reduce the need of ridge augmentation at posterior tooth sites.

Material and methods

This study enrolled patients who received dental implants at posterior tooth sites during 2013–2019. Demographic data and dental treatment histories were collected. Based on healing patterns after tooth extraction, patients were divided into ARP and spontaneous healing (SH) groups. Three surgical treatment plans were devised according to the alveolar bone volume on cone-beam computed tomography (CBCT). The three treatment plans were to perform implant alone, simultaneous guided bone regeneration (GBR) and implantation, and staged GBR before implantation. Statistical analyses were performed to determine relationships.

Results

There were 92 implant records in the ARP group and 249 implant records in the SH group. A significant intergroup difference was observed regarding the frequency distribution of the treatment modality of staged GBR before implant (χ² = 15.07, p = 0.0005). Based on the implant alone treatment modality and simple logistic regression, the SH pattern was related to staged GBR before implant (SH vs. ARP: crude odds ratio (OR) = 4.65, 95% confidence interval (CI) = 2.15–11.61, p = 0.0003). After adjusting confounding factors, the risk was still significant (adjusted OR = 5.02, 95% CI = 2.26–12.85, p = 0.0002).

Conclusions

The study results suggested that ARP is more likely to lead to the treatment modality of implant alone and reduce the need for staged GBR before implantation.

Clinical relevance

This study describes ARP capable of minimizing the need for staged GBR before implantation and shortening the treatment duration.

Weighted mandibular complete denture fabricated by using selective laser melting: A clinical report

The rehabilitation of patients with severely resorbed mandibular ridges can be a clinical challenge when rehabilitation with endosteal implants is not the elected treatment. Historically, weighted mandibular complete dentures have been used successfully to manage patients with severely resorbed ridges, and the weight of their cast metal has been calculated by using the weight of the wax and the density of the alloy. This clinical report presents the management of an 87-year-old woman with a severely resorbed mandibular ridge by using a weighted mandibular complete denture fabricated by using selective laser melting (SLM) technology in which the weight of the metal base was calculated by using the volume of the digital file used for manufacture.

Contour Changes Following Immediate Placement of Ultra-Wide Implants in Molar Extraction Sockets without Bone Grafting

The aim was to evaluate ridge reduction and mucosal recession following immediate placement of ultra-wide implants in molar sockets, without bone grafting. Impressions were taken prior to tooth extraction, 4 months and 1 year after implant placement. The casts were digitized and compared. Mucosal recessions and horizontal ridge reduction were measured. A total of 16 implants were in the maxilla and 11 in the mandible. At the buccal aspect, there was a mean reduction of 0.94 mm after 4 months and 0.89 mm after one year (p = 0.933). At the palatal/lingual aspect, this was 1.09 mm after 4 months and 0.69 mm after 1 year (p = 0.001). After 1 year, a recession of 0.59 mm was measured at the zenith, 1.04 mm at the mesial and 0.98 mm at the distal papilla. The mean midfacial horizontal ridge reduction was 1.23 mm after 4 months and 1.45 mm after 1 year. At the midpalatal/midlingual aspect, the mean horizontal reduction was 1.43 mm after 4 months and 1.16 mm after 1 year. Immediate implant placement without bone grafting in the posterior jaw yields a significant horizontal ridge reduction and minor mucosal recession. Clinicians should anticipate the amount of ridge reduction and consider augmentation at the time of implant placement.

A case control study to investigate the effects of denture wear on residual alveolar ridge resorption in edentulous patients

OBJECTIVES

To investigate the effect of complete denture wearing on residual ridge resorption in edentulous patient compared with edentulous patient who never wore dentures.

METHODS

Patients who had been edentulous for at least five year who had never worn dentures successfully were matched to edentulous denture wearing control patients. To control for factors possibly associated with alveolar ridge resorption patients who had been rendered edentulous in one arch before the other, smokers, those taking steroids, bisphosphonates, with histories of autoimmune diseases, diabetes mellitus or osteoporosis at any time during their period of edentulousness were excluded. Case and control groups were matched for age, sex and time since being rendered edentulous. Statistical analyses were undertaken using Person's Chi squared (X²) test and Fisher's exact test.

RESULTS

30 edentulous patients who had not worn dentures for at least five years were identified and matched with 30 controls. All control patients were the same age ± 2 years and had been edentulous for the same number of years ± 2 years of their respective controls. There was no significant difference between age and time since being rendered edentulous between case and control. Denture wearers had significantly more maxillary and mandibular residual alveolar ridge resorption than did non denture wearers. Severe ridge resorption was mostly confined to the denture wearing group.

CONCLUSION

Patients wearing complete dentures for more than 5 years had significantly more residual alveolar ridge resorption than was found in non-denture wearing edentulous patients.

Two novel SNPs in genes involved in immune response and their association with mandibular residual ridge resorption

“Residual ridge resorption” (RRR) is a multifactorial condition involving bone resorption of the residual ridge. We investigated 10 single nucleotide polymorphisms (SNPs) in seven genes with the aim of identifying the genetic factors associated with RRR susceptibility. The study group included 96 RRR patients and 96 controls. Age at first edentulism, duration of edentulism, and bone height were recorded. Saliva was collected from the subjects for DNA extraction. Genotype analysis was performed on the ‘SequenomMassARRAYiPLEX’. The genotype and allele frequencies calculated in patients and controls were compared. We found that rs1800896 in the IL10 gene and rs5743289 in NOD2 gene showed significant association with RRR. Within the RRR group, genotypes for each SNP were separated, and we observed that the age at first edentulism and bone height showed variations in the different genotypes of the ten studied SNPs. This study showed an association between SNPs in IL10 and NOD2 genes. It also revealed that the genotypes of the different SNPs influence bone resorption and health. Additionally, age at first edentulism and bone height were much lower in some genotypes. This study demonstrates the need for larger multicenter trials to confirm these findings. Finally, we suggest that the results of this study may be utilized for developing novel genetic diagnostic tests and for identifying Saudi individuals who may be more susceptible to RRR development following dental extraction.

Jawbone remodeling: a conceptual study based on Synchrotron High-resolution Tomography

One of the most important aspects of bone remodeling is the constant turnover mainly driven by the mechanical loading stimulus. The remodeling process produces changes not only in the bone microarchitecture but also in the density distribution of the mineralized matrix - i.e. in calcium concentrations- and in the osteocyte lacunar network. Synchrotron radiation-based X-ray microtomography (microCT) has proven to be an efficient technique, capable to achieve the analysis of 3D bone architecture and of local mineralization at different hierarchical length scales, including the imaging of the lacuno-canalicular network. In the present study, we used microCT within a conceptual study of jawbone remodeling, demonstratively focusing the investigation in two critical contexts, namely in the peri-dental and the peri-implant tissues. The microCT analysis showed that a relevant inhomogeneity was clearly present in both peri-dental and peri-implant biopsies, not only in terms of microarchitecture and mineralization degree, but also considering the lacunar network, i.e. size and numerical density of the osteocyte lacunae. The correlated histological results obtained on the same samples confirmed these observations, also adding information related to non-mineralized tissues. Despite its demonstrative nature, it was concluded that the proposed method was powerful in studying jawbone remodeling because it revealed a direct correlation of its rate with the lacunar density, as achieved by the analysis of the osteocyte lacunar network, and an inverse correlation with the local bone mineral density, as revealed with the Roschger approach.

Three-dimensional observations of the incisive foramen on cone-beam computed tomography image analysis

Purpose

The purpose of this study was to utilize cone-beam computed tomography (CBCT) image analysis to obtain anatomical information related to the morphology of the incisive foramen to provide useful data regarding implant placement and clinical procedures such as anesthesia.

Methods

The study included 167 patients who underwent CBCT scans over 20 years. Three components were measured: 1) the anteroposterior and mediolateral diameter of the incisive foramen, 2) the horizontal bone thickness anterior to the incisive foramen, and 3) the vertical bone height coronal to the incisive foramen. All measurements were expressed as mean±standard deviation and were analyzed by a single examiner.

Results

The anteroposterior diameter of the incisive foramen was wider than the mediolateral diameter (P<0.001). The diameter of the incisive foramen in patients in whom the central incisors were present was smaller than that in those in whom at least one central incisor was absent, but no statistically significant difference between the groups was observed. The horizontal bone thickness in the patients with central incisors was statistically significantly larger than that in the patients without at least one central incisor (P<0.001). The same pattern was observed with regard to vertical height, but that difference was not statistically significant.

Conclusions

The buccal bone thickness anterior to the incisive foramen was significantly decreased after central incisor loss. It is necessary to identify the morphology of the bone and the location of the incisive foramen via CBCT to avoid invasion of the incisive foramen and nasopalatine canal.

Effect of platelet-rich fibrin on alveolar ridge preservation: A systematic review

BACKGROUND

Platelet-rich fibrin (PRF) is the second generation of platelet concentrates and is used in many areas of dentistry. However, whether PRF is effective for alveolar ridge preservation remains controversial. The authors conducted research to evaluate the potential of PRF to preserve the alveolar ridge.

METHODS

A comprehensive literature search was conducted in MEDLINE, Cochrane Central Register of Controlled Trials, and Embase. Only randomized controlled trials were included. A systematic review was made for postoperative pain, soft-tissue healing, bone density, horizontal and vertical ridge dimension changes, and histologic analysis. The meta-analysis was performed on the alveolar osteitis, mesial and distal bone height changes, and bone fill with Review Manager Version 5.3 software.

RESULTS

Among the 588 eligible articles found in the initial search, 7 published studies from 2012 through 2019 were included. The authors' qualitative analysis showed that PRF may play a positive role in reducing postoperative pain and ridge dimension changes after tooth extraction. Among the 7 articles, only 2 trials assessed the effect of PRF on the alveolar osteitis, mesial and distal bone height changes, and bone fill. Results of our meta-analysis showed that smaller mesial bone height changes (standard mean difference, -1.07; 95% confidence interval, -1.92 to 0.22) and a greater percentage of bone fill (standard mean difference, 0.82; 95% confidence interval, 0.32 to 1.33) were observed in the PRF group.

CONCLUSIONS

Given the potential value of PRF, consideration should be given to PRF after tooth extraction. However, more high-quality trials are necessary to evaluate the exact role of PRF.

PRACTICAL IMPLICATIONS

Based on the authors' results, the usage of PRF was suggested in alveolar ridge preservation.

Influence of the anterior arch shape and root position on root angulation in the maxillary esthetic area

Purpose

This study was conducted to characterize the relationship of the angulation between the tooth root axis and alveolar bone axis with anterior alveolar (AA) arch forms and sagittal root position (SRP) in the anterior esthetic region using cone-beam computed tomography (CBCT) images.

Materials and Methods

CBCT images that met the inclusion and exclusion criteria were categorized using a recent classification of AA arch forms and a SRP classification. Then, the angulation of the root axis and the alveolar bone axis was measured using mid-sagittal CBCT images of each tooth. The relationships of the angulation with each AA arch form and SRP classification were evaluated using 1-way analysis of variance and a linear regression model.

Results

Ninety-eight CBCT images were included in this study. SRP had a greater influence than the AA arch form on the angulation of the root axis and the alveolar bone axis (P<0.05). However, the combination of AA arch form and SRP was more predictive of the angulation of the root axis and the alveolar bone axis than either parameter individually.

Conclusion

The angulation of the root axis and alveolar bone axis demonstrated a relationship with the AA arch form and SRP in teeth in the anterior esthetic region. The influence of SRP was greater, but the combination of both parameters was more predictive of root-to-bone angulation than either parameter individually, implying that clinicians should account for both the AA arch form and SRP when planning implant placement procedures in this region.

Management of Edentulous Patients

Edentulism, defined as the complete loss of all dentition, is a worldwide phenomenon. Edentulism occurs because of biologic disease processes, such as dental caries, periodontal diseases, trauma, and oral cancer. Edentulism is accompanied by several comorbidities that can significantly influence an individual. Although the rate of edentulism is declining, the number of edentulous patients continues to rise because of the increase in population. The management of edentulous patient has been addressed since the early days of dentistry. This article describes complete dentures and their maintenance, and advanced technology in complete dentures, and in implant-retained and implant-supported prosthesis.

A Genetic Association Study of a Specific Gene and Severe Form of Resorption in the Edentulous Mandible in the Egyptian Population

PURPOSE

To investigate for the first time in Egypt and the Middle East the relationship between a specific gene and the presence of severely resorbed edentulous mandibular ridges in a sample of the Egyptian population.

MATERIALS AND METHODS

The study was conducted on 50 subjects divided into case and control groups according to the residual ridge height. Saliva was used as a convenient source of DNA in the dental clinic. A certain genetic variation (1772C>T) in an important gene related to bone healing (hypoxia-inducible factor-1 alpha [HIF1-α] gene) was selected. The genetic variation 1772C>T is a single nucleotide polymorphism (SNP) that occurs when corresponding sequences of DNA from different individuals differ at one base. Then, we have 2 forms of the gene (2 alleles): C and T. SNPs typically have 3 genotypes; in this study, they are the CC, CT, and TT genotypes. Polymerase chain reaction (PCR) restriction fragment length polymorphism (RFLP) was the method performed for genotyping. The statistical significance of the results was evaluated by the Chi-square test and Fisher Exact test.

RESULTS

A statistically significant difference in the distribution of the TT genotype between both groups was detected with p-value = 0.049. There was also a difference in the distribution of the CC and CT genotypes, but it was not statistically significant, since the p-values were 0.733 and 0.145, respectively. The T alleles were more abundant in the case group, while the control group showed more frequency of the C allele with no statistical significance.

CONCLUSION

The TT genotype of the 1772C>T polymorphism of HIF1-α gene is related to the presence of severely atrophied residual ridges in completely edentulous Egyptians. This can be used as a marker to predict the future condition of the ridge using saliva samples. Further studies on larger scale are recommended.

Autologous Platelet Concentrates to improve post extraction outcomes

Data sourcesElectronic search of Medline, Embase, Scopus and the Cochrane Central Register of Controlled Trials (CENTRAL). Manual search of multiple dental journals and review reference lists.Study selectionTwo authors searched studies without any language or follow-up duration restrictions. Randomised and controlled clinical trials with a minimum of five patients per group and a parallel or split-mouth design were included. Outcome variables assessed comparing APC use included: patient satisfaction, self-reported postoperative quality of life, radiographic bone healing, clinical and radiographic marginal bone remodelling, soft tissue healing and complications such as alveolar osteitis.Data extraction and synthesisMethodologic quality of research was assessed using the following parameters: random sequence generation method and allocation concealment, calibration and binding of outcome assessment, comparability of control and treatment groups at entry, clear definition of inclusion and exclusion criteria, clear definition of outcomes assessment and success criteria, completeness of the outcome data reported and explanation for dropouts/withdrawal, recall rate, sample size and number of surgeons involved. Meta-analysis was carried out with data from studies reporting the same outcome measurements at comparable observations times following tooth extraction. Dichotomous outcomes (ie development of alveolar osteitis) for different treatments were expressed as risk ratios with a 95% confidence interval and continuous outcomes (ie quantifiable bone changes) were expressed as mean differences with a 95% confidence interval. Study design risk of bias was assessed using sensitivity analysis.ResultsThirty three studies met the inclusion criteria. Soft tissue healing at seven days after extraction was better when APCs were used (mean difference of 1.01; 95% CI; 0.77 to 1.24). Three months postoperatively, the second mandibular molar distal probing depth was statistically better in the APC group, mean difference of -1.63; (95% CI; -2.05 to -1.22). There were no statistical differences between the APC and control groups for alveolar osteitis, acute inflammation or alveolar infection. Although the percentage of new bone and indirect measurement of bone metabolism were similar for both groups, bone density was statistically better for the APC group, mean difference of 5.06; (95% CI; 1.45 to 8.66). Qualitative analysis found decreased swelling in four of five studies and decreased trismus in two of three studies. The variations between different types of APCs were not evaluated as part of this review.ConclusionsAPCs including platelet-rich plasma (PRP), platelet-rich fibrin (PRF) and plasma rich in growth factors (PRGF) can be used following tooth extraction to improve soft tissue healing, probing depth and bone density, as well as to reduce swelling and trismus. However, their use in reducing other postoperative complications such as pain, alveolar osteitis, inflammation, infection, or in improving new bone percentage and metabolism cannot be recommended. Study heterogeneity made it impossible to perform meta-analysis for pain reduction; therefore further studies investigating the effect on pain are required.

Comparison of stability with two-time use of platelet-rich growth factor versus one-time use of platelet-rich growth factor in immediate placement of dental implant in infected socket

PURPOSE

The aim is to evaluate the outcome and compare the stability with two-time use of platelet-rich growth factor (PRGF) versus one-time use of PRGF in immediate placement of dental implant in infected socket.

MATERIALS AND METHODS

This study comprised placement of immediate implant in infected sockets in 100 patients with two-time use of PRGF (Group B) versus one-time use of PRGF (Group A). Proper administration of antibiotics, careful debridement of the socket, and meticulous suturing were done in every case. In Group A, it was placed at the time of immediate implant placement. In Group B, it was placed twice: at the time of placement of implant and 1 month after placement of implant. Clinical assessment of pain and swelling was done. Stability was assessed by radiofrequency analyzer immediately after placement and at follow-up of 2 months and 3 months.

RESULTS

The stability of implants with two-time placement of PRGF was more than that with one-time placement of dental implant. All except 14 implants osseointegrated in this study. There was significant decrease of pain and swelling in both the groups from day 1 to week 1 and was nil by 12 weeks.

CONCLUSION

It can be concluded that placement of immediate implant in infected socket with two-time use of PRGF is an effective and better alternative for rehabilitation. However, more studies with longer follow-up and large number of patients are needed to confirm the results of this study.

Resorption of the mandibular residual ridge: A micro-CT and histomorphometrical analysis

OBJECTIVES

The aim of this study was to investigate whether the extent of mandibular resorption and gender is related to the bone turnover and microarchitecture of the edentulous mandible.

PARTICIPANTS AND METHODS

A mandibular bone sample was obtained at canine position from 36 edentulous participants (50% women; mean age: 65 years) during dental implant surgery. All female participants were postmenopausal. Mandibular height, duration of edentulous state and resorption pattern (Cawood classification) were recorded. Microcomputed tomography was used to determine bone mineral density, bone volume fraction, trabecular connectivity density, trabecular number, trabecular thickness and trabecular separation. Histomorphometric analysis was used to assess bone turnover: osteoid area and surface were measured as a parameter for bone formation and osteoclast numbers were determined as a parameter for bone resorption. Correlations between micro-CT, histomorphometrical parameters and clinical data were analysed with correlation coefficients and parametric and non-parametric tests.

RESULTS

Lower mandibular height was strongly associated with higher bone mineral density in trabecular bone. Women showed higher osteoclast numbers in trabecular bone than men. In trabecular bone of women, bone volume was significantly related to osteoclast numbers, osteoid surface and osteoid area.

CONCLUSIONS

The higher trabecular bone mineral density found in the edentulous mandible could either indicate a restructuring process of the resorbed mandible or suggests that the inferior region of the mandible is more highly mineralised. In women, higher bone turnover is associated with lower bone volume, suggesting an effect of postmenopausal oestrogen deficiency on bone turnover in the edentulous mandible.

Alveolar bone remodeling after tooth extraction in irradiated mandible: An experimental study with canine model

OBJECTIVES

The aim of the present study is to investigate the morphological and cellular changes in dental extraction socket that has been irradiated after the tooth extraction and to describe morphological characteristics of the osteocytes and osteocyte-lacunar-canalicular network (LCN) by scanning electron microscopy (SEM).

MATERIAL AND METHODS

Five beagle dogs aged 1-2 years were used in this study. One side of each mandible was irradiated in two sessions and the other side of mandible (non-irradiated) served as a control. The mandible bone blocks were processed by bulk staining en bloc in basic fuchsin and the specimens were embedded routinely in polymethyl methacrylate resin without preliminary decalcification. All blocks were subjected to micro-CT imaging, after that the specimens were prepared for light microscopy and SEM.

RESULTS

Alterations in bone macrostructure are minimal in irradiated bone, but the changes in LCN are clear. In the area of the tooth extraction socket, the connections of osteocytes to the vessels and to neighboring osteocytes were not observed both in irradiated and nonirradiated bone. However, osteoclasts were located in the bone surface entering inside to the bone between osteons. In the lamellar bone of lateral sides, a decrease in canalicular connections between osteocytes and periosteum was found in irradiated bone as compared to the non-irradiated side.

CONCLUSIONS

The novelty of the present study is that radiation disrupts osteocytes and their dendrites.

Healing of Postextraction Sockets Preserved With Autologous Platelet Concentrates. A Systematic Review and Meta-Analysis

PURPOSE

The true benefit of autologous platelet concentrates (APCs) for enhancing the healing of postextraction sites is still a matter of debate, and in recent years several clinical trials have addressed this issue. The purpose of this study was to determine the effectiveness of an APC adjunct in the preservation of fresh extraction sockets.

MATERIALS AND METHODS

An electronic search was performed on Medline, Embase, Scopus, and the Cochrane Central Register of Controlled Trials. Only controlled clinical trials or randomized clinical trials were included. Selected articles underwent risk-of-bias assessment. The outcomes were complications and adverse events, discomfort and quality of life, bone healing and remodeling assessed by histologic and radiographic techniques, and soft tissue healing.

RESULTS

Thirty-three comparative studies were included. Nine articles had a parallel design and 24 had a split-mouth design. Twenty studies were considered to have a low risk of bias and 13 were considered to have a high risk. Overall, 1,193 teeth were extracted from 911 patients. Meta-analysis showed that soft tissue healing, probing depth at 3 months, and bone density at 1, 3, and 6 months were statistically better for the APC group. Qualitative analysis suggested that APCs might be associated with a decrease in swelling and trismus. However, no relevant difference among groups was found for probing depth at 1 month, incidence of alveolar osteitis, acute inflammation or infection, percentage of new bone, and indirect measurement of bone metabolism.

CONCLUSION

APCs should be used in postextraction sites to improve clinical and radiographic outcomes such as bone density and soft tissue healing and postoperative symptoms. The actual benefit of APCs on decreasing pain in extraction sockets is still not quantifiable.

The Effect of Ridge Expansion on Implant Stability in Narrow Partially Edentulous Ridges - A Preliminary Clinical Study

INTRODUCTION

Currently, dental treatments with better aesthetic results and less treatment time is more acceptable by the patients. Inadequate amount of bone for implant placement at functionally and aesthetically most appropriate position is a common problem.

AIM

To assess the effect of ridge expansion on implant stability in narrow partially edentulous ridges and to evaluate clinically and radiographically the success of dental implants, placed immediately following ridge expansion procedure.

MATERIAL AND METHODS

Ten participants (nine males, one female, average age - 28 years) with partial edentulism associated with narrow atrophic alveolar ridges with adequate height and willing to participate in the study were included. The ridge expansion was performed using osteotomes and simultaneous implant placement was done. A total of 10 implants were placed. Stability, achieved ridge width and radiographic crestal bone loss were assessed three months post-operatively.

RESULTS

Three months follow-up revealed stable implants both clinically and radiographically. All 10 implants were surrounded by adequate amount of bone required for successful functional rehabilitation.

CONCLUSION

The study reveals that the technique of ridge expansion using osteotomes is successful in horizontal expansion, in cases of atrophic alveolar ridges thus, eliminating the need for more complex treatment as well as reduces the rehabilitation time along with improving the quality of bone support.

Randomised trial of bisphosphonate-coated dental implants: Radiographic follow-up after five years of loading

The results of a randomised trial with bisphosphonate-coated dental implants have been reported previously. Each patient received one coated and one uncoated implant in a double-blind split-mouth design study. After 6 months of osseointegration, resonance frequency analysis indicated better fixation of the coated implants. Reduced marginal bone resorption was also shown. However, it was not known whether the advantage of the bisphosphonate coating would persist over time. The radiographic results at 5 years after implant installation are reported herein. A blinded investigator measured marginal resorption on fresh radiographs obtained for 14 of the 16 patients (two had died) and compared these with the post-implantation images. Non-parametric statistics were used. All implants functioned well. The median marginal bone loss for control implants was found to be 0.70mm, which is less than usually reported in the literature. The bisphosphonate-coated implants showed even less resorption (median 0.20mm). The median difference within each pair of implants after 5 years of use was 0.34mm (95% confidence interval 0.00-0.75mm; P=0.04). The present data suggest that bisphosphonate-coated implants enable prolonged preservation of the marginal bone.

Immediate Nonfunctional Loading of Two Single-Maxillary Postextractive Implants: 6-Year Postloading Results of Two Case Reports

Objectives. The aim of the study was to evaluate and compare crestal bone loss of single-maxillary immediate postextractive implants and immediate nonfunctional loading (INFL) during 72 months of follow-up. Material and Methods. Two single titanium implants (Certain Prevail, Biomet 3I, USA) were placed in two patients using INFL technique. Implant stability and crestal bone level were measured on periapical radiographs at 1, 3, and 6 months after surgery. Results. All osseointegrated implants were clinically successful after 6 years of functional loading. Conclusion. Within the limit of the present case report, the paper supports the concept that INFL of single dental implant can be a successful treatment procedure.

Biomechanics of oral mucosa

The prevalence of prosthodontic treatment has been well recognized, and the need is continuously increasing with the ageing population. While the oral mucosa plays a critical role in the treatment outcome, the associated biomechanics is not yet fully understood. Using the literature available, this paper provides a critical review on four aspects of mucosal biomechanics, including static, dynamic, volumetric and interactive responses, which are interpreted by its elasticity, viscosity/permeability, apparent Poisson's ratio and friction coefficient, respectively. Both empirical studies and numerical models are analysed and compared to gain anatomical and physiological insights. Furthermore, the clinical applications of such biomechanical knowledge on the mucosa are explored to address some critical concerns, including stimuli for tissue remodelling (interstitial hydrostatic pressure), pressure–pain thresholds, tissue displaceability and residual bone resorption. Through this review, the state of the art in mucosal biomechanics and their clinical implications are discussed for future research interests, including clinical applications, computational modelling, design optimization and prosthetic fabrication.

Prediction of the alveolar bone level after the extraction of maxillary anterior teeth with severe periodontitis

Purpose

After extraction, the alveolar bone tends to undergo atrophy in three-dimensions. The amount of alveolar bone loss in the horizontal dimension has been reported to be greater than the amount of bone loss in the vertical dimension, and is most pronounced in the buccal aspect. The aim of this study was to monitor the predictive alveolar bone level following the extraction of anterior teeth seriously involved with advanced chronic periodontitis.

Methods

This study included 25 patients with advanced chronic periodontitis, whose maxillary anterior teeth had been extracted due to extensive attachment loss more than one year before the study. Periapical radiographs were analyzed to assess the vertical level of alveolar bone surrounding the edentulous area. An imaginary line connecting the mesial and the distal ends of the alveolar crest facing the adjacent tooth was arbitrarily created. Several representative coordinates were established in the horizontal direction, and the vertical distance from the imaginary line to the alveolar crest was measured at each coordinate for each patient using image analysis software. Regression functions predicting the vertical level of the alveolar bone in the maxillary anterior edentulous area were identified for each patient.

Results

The regression functions demonstrated a tendency to converge to parabolic shapes. The predicted maximum distance between the imaginary line and the alveolar bone calculated using the regression function was 1.43±0.65 mm. No significant differences were found between the expected and actual maximum distances. Likewise, the predicted and actual maximum horizontal distances did not show any significant differences. The distance from the alveolar bone crest to the imaginary lines was not influenced by the mesio-distal spans of the edentulous area.

Conclusions

After extraction, the vertical level of the alveolar ridge increased to become closer to the reference line connecting the mesial and distal alveolar crests.

Association of matrix metalloproteinase 1 gene promoter mutation and residual ridge resorption in edentulous patients of South Indian origin

Background:

Matrix metalloproteinase (MMP) are involved in bone transformation at the extraction site postdental extraction. We examined the genetic association between single nucleotide polymorphisms of MMP-1 and continuous atrophy of edentulous mandible.

Methods:

Buccal cells from 33 edentulous patients were collected using sterile wooden spatula and were suspended in 15 ml falcon tubes containing 1.5 ml of cell lysis buffer, without proteinase K. The cells were transported to the laboratory on ice and were stored at −20°C until being processed.

Results:

Of the samples analyzed, 26 edentulous patients (78.8%) carried 2G allele, while 7 of them (21.2%) carried 1G allele.

Conclusion:

The patients with the alveolar bone resorption exhibited more of 2G allele while only 21.2% of them showed 1G allele, associated with excessive atrophy of edentulous mandible. This study may provide genetic background to identify susceptible individuals prone to develop jawbone atrophy after dental extraction.

Importance of teeth in maintaining the morphology of the adult mandible in humans

Edentulism can negatively affect both masticatory performance and dietary intake by altering the patterns of biomechanical stress and strain, which in turn modifies the morphology of the different regions of the mandible. The morphological changes in the mandible caused by these stressors are unknown when comparing mandibles across varying dentition states. This study investigated differences in the morphology of human mandibles across various states of the dentition. In total, 498 mandibles of individuals between 20 and 80 yr of age at death were sourced from the Raymond A. Dart Collection of Human Skeletons. These included fully dentate (n = 95), partially edentulous (n = 333), and fully edentulous (n = 70) mandibles. Twelve linear anthropometric measurements of the mandible were derived from digitized landmarks located on its external surface. Data analysis included geometric morphometrics and multivariate analyses. Compared with dentate and partially edentulous mandibles, fully edentulous mandibles showed a shorter alveolar height (-0.4 mm), a shorter mandibular body length (-4 mm), a larger gonial angle (+4°), a more obtuse mental angle (+4.7°), a broader bicondylar width (+3.8 mm), and a taller ramus height (+1.6 mm). Thus, edentulous states are associated with an altered mandibular morphology, which may result from a reduction in jaw function.

Modes of action associated with uranium induced adverse effects in bone function and development

Uranium, a naturally occurring element used in military and industrial applications, accumulates in the skeletal system of animals and humans. Evidence from animal and in-vitro studies demonstrates that uranium exposure is associated with alterations in normal bone functions. The available studies suggest that upon absorption uranium directly affects bone development and maintenance by inhibiting osteoblast differentiation and normal functions, and indirectly by disrupting renal production of Vitamin D. Animal studies also provide evidence for increased susceptibility to uranium-induced bone toxicity during early life stages. The objective of this review is to provide a summary of uranium-induced bone toxicity and the potential mechanisms by which uranium can interfere with bone development and promote fragility. Since normal Vitamin D production and osteoblast functions are essential for bone growth and maintenance, young individuals and the elderly may represent potentially susceptible populations to uranium-induced bone damage.

Cell-based bone regeneration for alveolar ridge augmentation--cell source, endogenous cell recruitment and immunomodulatory function

Alveolar ridge plays a pivotal role in supporting dental prosthesis particularly in edentulous and semi-dentulous patients. However the alveolar ridge undergoes atrophic change after tooth loss. The vertical and horizontal volume of the alveolar ridge restricts the design of dental prosthesis; thus, maintaining sufficient alveolar ridge volume is vital for successful oral rehabilitation. Recent progress in regenerative approaches has conferred marked benefits in prosthetic dentistry, enabling regeneration of the atrophic alveolar ridge. In order to achieve successful alveolar ridge augmentation, sufficient numbers of osteogenic cells are necessary; therefore, autologous osteoprogenitor cells are isolated, expanded in vitro, and transplanted to the specific anatomical site where the bone is required. Recent studies have gradually elucidated that transplanted osteoprogenitor cells are not only a source of bone forming osteoblasts, they appear to play multiple roles, such as recruitment of endogenous osteoprogenitor cells and immunomodulatory function, at the forefront of bone regeneration. This review focuses on the current consensus of cell-based bone augmentation therapies with emphasis on cell sources, transplanted cell survival, endogenous stem cell recruitment and immunomodulatory function of transplanted osteoprogenitor cells. Furthermore, if we were able to control the mobilization of endogenous osteoprogenitor cells, large-scale surgery may no longer be necessary. Such treatment strategy may open a new era of safer and more effective alveolar ridge augmentation treatment options.

Contour changes in human alveolar bone following tooth extraction of the maxillary central incisor

The purpose of this study was to apply cone-beam computed tomography (CBCT) to observe contour changes in human alveolar bone after tooth extraction of the maxillary central incisor and to provide original morphological evidence for aesthetic implant treatment in the maxillary anterior area. Forty patients were recruited into the study. Each patient had two CBCT scans (CBCT I and CBCT II), one taken before and one taken three months after tooth extraction of maxillary central incisor (test tooth T). A fixed anatomic reference point was used to orient the starting axial slice of the two scans. On three CBCT I axial slices, which represented the deep, middle, and shallow layers of the socket, labial and palatal alveolar bone widths of T were measured. The number of sagittal slices from the start point to the pulp centre of T was recorded. On three CBCT II axial slices, the pulp centres of extracted T were oriented according to the number of moved sagittal slices recorded in CBCT I. Labial and palatal alveolar bone widths at the oriented sites were measured. On the CBCT I axial slice which represented the middle layer of the socket, sagittal slices were reconstructed. Relevant distances of T on the sagittal slice were measured, as were the alveolar bone width and tooth length of the opposite central incisor. On the CBCT II axial slice, which represented the middle layer of the socket, relevant distances recorded in CBCT I were transferred on the sagittal slice. The height reduction of alveolar bone on labial and palatal sides was measured, as were the alveolar bone width and tooth length of the opposite central incisor at the oriented site. Intraobserver reliability assessed by intraclass correlation coefficients (ICCs) was high. Paired sample t-tests were performed. The alveolar bone width and tooth length of the opposite central incisor showed no statistical differences (P<0.05). The labial alveolar bone widths of T at the deep, middle, and shallow layers all showed statistical differences. However, no palatal alveolar bone widths showed any statistical differences. The width reduction of alveolar bone was 1.2, 1.6, and 2.7 mm at the deep, middle, and shallow layers, respectively. The height reduction of alveolar bone on labial and palatal sides of T both showed statistical differences, which was 1.9 and 1.1 mm, respectively.