Formation of six-membered cyclic anhydrides by thermally induced intramolecular ester condensation in Eudragit E film

Chemiluminescent Nanogels as Intensive and Stable Signal Probes for Fast Immunoassay of SARS-CoV-2 Nucleocapsid Protein

It is highly desired to exploit good nanomaterials as nanocarriers for immobilizing chemiluminescence (CL) reagents, catalysts and antibodies to develop signal probes with intensive and stable CL properties for immunoassays. In this work, N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and Co2+ bifunctionalized polymethylacrylic acid nanogels (PMAANGs-ABEI/Co2+) were synthesized via a facile strategy by utilizing carboxyl group-rich PMAANGs as nanocarriers to immobilize ABEI and Co2+. The obtained PMAANGs-ABEI/Co2+ showed extraordinary CL performance. The CL intensity is 2 orders of magnitude higher than that of previously reported ABEI and Cu2+-cysteine complex bifunctionalized gold nanoparticles with high CL efficiency. This was attributed to the excellent catalytic ability of Co2+ and polymethylacrylic acid nanogels, as well as the improved CL catalytic efficiency from a decreased spatial distance between ABEI and the catalyst. The as-prepared nanogels also possess abundant surface reaction sites and good CL stability. On this basis, a sandwich immunoassay for the nucleocapsid protein of SARS-CoV-2 (N protein) was developed by using magnetic bead connected primary antibody as a capture probe and PMAANGs-ABEI/Co2+ connected secondary antibody as a signal probe. The linear range of the proposed method for N protein detection was 3.16-316 ng/mL, and its detection limit was 2.19 ng/mL (S/N = 3). Moreover, the developed immunoassay was performed with a short incubation time of 5 min, which greatly reduced the detection time for N protein. By using corresponding antibodies, the developed strategy might be applied to detect other biomarkers.

The Formation of Impossible Rings in Macrocyclooligomerizations for Cyclodepsipeptide Synthesis: The 18-from-12 Paradox

A reinvestigation into the macrocyclooligomerization (MCO) of a tetradepsipeptide is reported, uncovering a paradox in which the MCO of depsipeptide monomers can produce "impossible" ring sizes: a 12-atom chain produced the expected 24-membered ring, alongside unexpected 18- and 30-membered cyclic oligomeric depsipeptides (CODs). We report an alternative preparation of authentic 18- and 36-membered macrocycles for this case using a stepwise synthesis that provides definitive analytical characterization for each ring size. Our investigation yields a recharacterization and reassignment of two macrocycles originally reported in this MCO series, along with updated yields and isothermal titration calorimetry data after implementation of new critical protocols for purification and subsequent analysis. Initial studies to probe this mechanistic conundrum are described.

Hot-Melt Extrusion: a Roadmap for Product Development

Hot-melt extrusion has found extensive application as a feasible pharmaceutical technological option over recent years. HME applications include solubility enhancement, taste masking, and sustained drug release. As bioavailability enhancement is a hot topic of today's science, one of the main applications of HME is centered on amorphous solid dispersions. This review describes the most significant aspects of HME technology and its use to prepare solid dispersions as a drug formulation strategy to enhance the solubility of poorly soluble drugs. It also addresses molecular and thermodynamic features critical for the physicochemical properties of these systems, mainly in what concerns miscibility and physical stability. Moreover, the importance of applying the Quality by Design philosophy in drug development is also discussed, as well as process analytical technologies in pharmaceutical HME monitoring, under the current standards of product development and regulatory guidance. Graphical Abstract.

Application of the combination of ball-milling and hot-melt extrusion in the development of an amorphous solid dispersion of a poorly water-soluble drug with high melting point

The aim of the study was to develop an amorphous solid dispersion of a poorly water-soluble drug with high melting point by ball milling and hot melt extrusion as a co-processing method. Solid dispersion systems were prepared by ball milling-hot melt extrusion and then compared with those prepared with hot melt extrusion. The effects of three process parameters in the co-processing method, namely, barrel temperature, screw speed, and cooling rate, were systematically studied. The physical state of prepared solid dispersion was characterized by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, phase solubility, and dissolution study. The Resveratrol-Eudragit® EPO system exhibited good miscibility and significant dissolution enhancement. Resveratrol in the amorphous solid dispersion existed in an amorphous state and had molecular interactions with Eudragit® EPO. Stability studies showed no apparent difference in the physical state of the solid dispersion after 6 months. In conclusion, combining ball milling with hot melt extrusion is a promising method for preparing the amorphous solid dispersion of a poorly water-soluble drug with high melting point.

Sorption mechanisms of lead on silicon-rich biochar in aqueous solution: Spectroscopic investigation

Unraveling sorption mechanisms of lead (Pb) to silicon (Si)-rich biochar at molecular scale in aqueous solution are essential for the effective application of the biochars to the remediation of Pb and other metal(loid)s pollution in the environment. Thus, this study investigated the contributions of phytoliths and other compounds to the Pb sorption on Si-rich coconut fiber biochar (CFB500) and the corresponding sorption mechanisms using spectroscopic techniques, including the micro-X-ray fluorescence (μ-XRF), X-ray absorption fine structure (XAFS), scanning electron microscopy combined with energy dispersive X-ray spectroscopy, and X-ray diffraction. The μ-XRF and XAFS results showed that K, Ca, Cu, Mn, and Fe were released and significantly related to Pb in Pb-loaded CFB500; four major Pb species were formed with similar structures to lead carboxylate (e.g., Pb(C₂H₃O₂)₂), Pb₃(PO₄)₂, PbSiO₃, and PbCO₃. On phytoliths in CFB500, Pb²⁺ ions were mainly sorbed on the sites of silicate with a structure similar to PbSiO₃. The contribution of binding sites for Pb²⁺ sorption was ascribed to the outer-wall of carbon skeleton of CFB500, which was stronger than that provided by the mineral oxide aggregate and phytoliths on CFB500. Organic carbon functional groups, inorganic carbonates, silicates and phosphates on CFB500 mostly dominated the sorption sites for Pb²⁺. Our results suggest that CFB500 was a promising material for the remediation of Pb-contaminated aqueous environments (e.g., wastewater).

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

Physicochemical characterization of in situ drug-polymer nanocomplex formed between zwitterionic drug and ionomeric material in aqueous solution

Biocompatible polymeric materials with the potential to form functional structures, in association with different therapeutic molecules, in physiological media, represent a great potential for biological and pharmaceutical applications. Therefore, here the formation of a nano-complex between a synthetic cationic polymer and model drug (ampicillin trihydrate) was studied. The formed complex was characterized by size and zeta potential measurements, using dynamic light scattering and capillary electrophoresis. Moreover, the chemical and thermodynamically stability of these complexes were studied. The ionomeric material, here referred as EuCl, was obtained by equimolar reaction between Eudragit E and HCl. The structural characterization was carried out by potentiometric titration, FTIR spectroscopy, and DSC. The effect of pH, time, polymer concentration and ampicillin/polymer molar ratio over the hydrodynamic diameter and zeta potential were established. The results show that EuCl ionomer in aqueous media presents two different populations of nanoparticles; one of this tends to form flocculated aggregates in high pH and concentrations, by acquiring different conformations in solution by changing from a compact to an extended conformation. Moreover, the formation of an in situ interfacial polymer-drug complex was demonstrated, this could slightly reduce the hydrolytic degradation of the drug while affecting its solubility, mainly under acidic conditions.

Advances in simultaneous DSC-FTIR microspectroscopy for rapid solid-state chemical stability studies: some dipeptide drugs as examples

The solid-state chemistry of drugs has seen growing importance in the pharmaceutical industry for the development of useful API (active pharmaceutical ingredients) of drugs and stable dosage forms. The stability of drugs in various solid dosage forms is an important issue because solid dosage forms are the most common pharmaceutical formulation in clinical use. In solid-state stability studies of drugs, an ideal accelerated method must not only be selected by different complicated methods, but must also detect the formation of degraded product. In this review article, an analytical technique combining differential scanning calorimetry and Fourier-transform infrared (DSC-FTIR) microspectroscopy simulates the accelerated stability test, and simultaneously detects the decomposed products in real time. The pharmaceutical dipeptides aspartame hemihydrate, lisinopril dihydrate, and enalapril maleate either with or without Eudragit E were used as testing examples. This one-step simultaneous DSC-FTIR technique for real-time detection of diketopiperazine (DKP) directly evidenced the dehydration process and DKP formation as an impurity common in pharmaceutical dipeptides. DKP formation in various dipeptides determined by different analytical methods had been collected and compiled. Although many analytical methods have been applied, the combined DSC-FTIR technique is an easy and fast analytical method which not only can simulate the accelerated drug stability testing but also at the same time enable to explore phase transformation as well as degradation due to thermal-related reactions. This technique offers quick and proper interpretations.

Prolonged intragastric drug delivery mediated by Eudragit® E-carrageenan polyelectrolyte matrix tablets

Interpolyelectrolyte (IPE) complexation between carrageenan (CG) and Eudragit E (EE) was studied in 0.1 M HCl and was used to develop floating matrix tablets aimed to prolong gastric-residence time and sustain delivery of the loaded drug. The optimum EE/CG IPE complexation weight ratio (0.6) was determined in 0.1 M HCl using apparent viscosity measurements. The IPE complex was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Metronidazole matrix tablets were prepared by direct compression using EE, CG, or hybrid EE/CG with ratio optimal for IPE complexation. Corresponding effervescent tablets were prepared by including Na bicarbonate as an effervescent agent. Tablets were evaluated for in vitro buoyancy and drug release in 0.1 M HCl. Both CG and EE-CG effervescent matrices (1:2 drug to polymer weight ratio, 60 mg Na bicarbonate) achieved fast and prolonged floating with floating lag times less than 30 s and floating duration of more than 10 h. The corresponding EE effervescent matrices showed delayed floating and rapid drug release, and completely dissolved after 3 h of dissolution. CG matrices showed an initial burst drug release (48.3±5.0% at 1 h) followed by slow drug release over 8 h. EE-CG matrices exhibited sustained drug release in almost zero-order manner for 10 h (68.2±6.6%). The dissolution data of these matrices were fitted to different dissolution models. It was found that drug release followed zero-order kinetics and was controlled by the superposition of the diffusion and erosion.

Use of fourier transform infrared spectroscopy to follow the heterocumulene aided thermal dehydration of phthalic and naphthalic acids

Fourier transform infrared (FT-IR) spectroscopy has been successfully employed to follow the formation of phthalic anhydride and 1,8-naphthalic anhydride on heating their corresponding acids. The effects of three heterocumulenes, cyanamide, dicyandiamide, and sodium cyanate, on the temperature of formation of the anhydrides were also investigated using this method. It was found that the carbodiimides cyanamide and dicyandiamide dramatically lowered the temperature at which thermal dehydration of the acid led to anhydride formation. It was noted that cyanamide had a stronger catalytic effect than dicyandiamide, presumably due to the electron-withdrawing effect of the amidine group. Sodium cyanate was also found to promote the thermal dehydration of the acids to form the corresponding anhydrides. Under more severe conditions, phthalic acid anhydride formed is seen to react further, leading to the formation of phthalimide. The discrepancy between the products obtained with cyanamide and sodium cyanate leads to the conclusion that, unlike earlier claims, imide formation is not due to the reaction of the anhydride with the urea formed but with sodium cyanate itself. However, only the phthalic anhydride five-membered ring system is sufficiently reactive towards the CNO- nucleophile to form the imide; the six-membered 1,8-naphthalic anhydride system does not react in this way.

Nanoparticles containing ketoprofen and acrylic polymers prepared by an aerosol flow reactor method

The purpose of this study was to outline the effects of interactions between a model drug and various acrylic polymers on the physical properties of nanoparticles prepared by an aerosol flow reactor method. The amount of model drug, ketoprofen, in the nanoparticles was varied, and the nanoparticles were analyzed for particle size distribution, particle morphology, thermal properties, IR spectroscopy, and drug release. The nanoparticles produced were spherical, amorphous, and had a matrix-type structure. Ketoprofen crystallization was observed when the amount of drug in Eudragit L nanoparticles was more than 33% (wt/wt). For Eudragit E and Eudragit RS nanoparticles, the drug acted as an effective plasticizer resulting in lowering of the glass transition of the polymer. Two factors affected the preparation of nanoparticles by the aerosol flow reactor method, namely, the solubility of the drug in the polymer matrix and the thermal properties of the resulting drug-polymer matrix.

Intramolecular cyclization of diketopiperazine formation in solid-state enalapril maleate studied by thermal FT-IR microscopic system

The pathway of diketopiperazine (DKP) formation of solid-state enalapril maleate has been studied by using a novel Fourier transform infrared microspectroscope equipped with a thermal analyzer (thermal FT-IR microscopic system). The thermogram of the conventional differential scanning calorimetry (DSC) method was also compared. The results show new evidence of IR peaks at 3250 cm(-1) (the broad O-H stretching mode of water), and at 1738 and 1672 cm(-1) (the carbonyl band of DKP), indicating DKP formation in enalapril maleate via intramolecular cyclization. Moreover, the disappearance of IR peaks from enalapril maleate at 3215 cm(-1) (the secondary amine), 1728 cm(-1) (the carbonyl group of carboxylic acid), and 1649 cm(-1) (the carbonyl stretching of tertiary amide) also confirmed the DKP formation. The thermal FT-IR microscopic system clearly evidenced that the DKP formation in enalapril maleate started from 129 degrees C, and reached a maximum at 137 degrees C. This result was also confirmed by the conventional DSC thermogram of the compressed mixture of KBr powder and enalapril maleate, in which an endothermic peak at 144 degrees C with an extrapolated onset temperature at 137 degrees C was observed. This strongly suggests that the thermal FT-IR microscopic system was able to qualitatively detect the formation of DKP derivatives in solid-state enalapril maleate via intramolecular cyclization.

Reaction kinetics of solid-state cyclization of enalapril maleate investigated by isothermal FT-IR microscopic system

To investigate the reaction kinetics of the solid-state degradation process of enalapril maleate, a Fourier transform infrared microspectroscope equipped with thermal analyzer (thermal FT-IR microscopic system) was used. The isothermal stability study was conducted at 120-130 degrees C for 1-2 h and changes in the three-dimensional plots of the IR spectra of enalapril maleate with respect to heating time were observed. The study indicates that the bands at 1649, 1728, and 1751 cm(-1) assigned to intact enalapril maleate gradually reduced in peak intensity with heating time. However, the peak intensities at 1672 and 1738 cm(-1) (due to enalapril diketopiperazine (DKP) formation) and at 3250 cm(-1) (corresponding to water formation) gradually increased with heating time. The solid-state diketopiperazine formation and the degradation process of enalapril maleate via intramolecular cyclization were found to be simultaneous. The isothermal decomposition curves were sigmoidal and were characterized by induction and acceleration periods, indicating the presence of autocatalytic solid-state decompositions. Moreover, the power-law equation (n = 1/4) was found to provide the best fit to the kinetics of decomposition. This isothermal FT-IR microscopic system was easily used to investigate the degradation of enalapril maleate and the concomitant formation of DKP. The solid-state reaction of enalapril maleate required an activation energy of 195+/-12 kJ/mol to undergo the processes of decomposition and intramolecular cyclization.

Temperature-induced conformational changes in amyloid beta(1-40) peptide investigated by simultaneous FT-IR microspectroscopy with thermal system

Temperature-dependent secondary structures of the amyloid beta(1-40) peptide in the solid state were studied by simultaneous Fourier transform infrared/differential scanning calorimetry (FT-IR/DSC) microspectroscopic system with the heating-cooling-reheating cycle. The result indicates that a thermal transition temperature at 45 degrees C was easily obtained from the three-dimensional plot of the transmission FT-IR spectra as a function of temperature. Furthermore, the thermal-dependent conformational transformations, due to denaturation and aggregation, of solid amyloid beta(1-40) were mainly evidenced by reducing the compositions from 37 to 20-24% for alpha-helical and random coil structures but increasing the components from 27 to 45% for intermolecular beta-sheet structures. Thermal-irreversible behavior and a poor thermal stability of solid amyloid beta(1-40) were also observed from the poor restoration of the secondary conformational changes in the heated sample.

Simultaneous formation and detection of the reaction product of solid-state aspartame sweetener by FT-IR/DSC microscopic system

The solid-state stability of aspartame hemihydrate (APM) sweetener during thermal treatment is important information for the food industry. The present study uses the novel technique of Fourier transform infrared microspectroscopy equipped with differential scanning calorimetry (FT-IR/DSC microscopic system) to accelerate and determine simultaneously the thermal-dependent impurity formation of solid-state APM. The results indicate a dramatic change in IR spectra from 50, 110 or 153 degrees C, which was respectively attributed to the onset temperature of water evaporation, dehydration and cyclization processes. It is suggested that the processes of dehydration and intramolecular cyclization occurred in the solid-state APM during the heating process. As an impurity, 3-carboxymethyl-6-benzyl-2,5-diketopiperazine (DKP) degraded from solid state APM via intramolecular cyclization and liberation of methanol. This was evidenced by this novel FT-IR/DSC microscopic system in a one-step procedure.