Role of nucleotide hydrolysis in the dynamics of actin filaments and microtubules

Stable GDP-tubulin islands rescue dynamic microtubules

Microtubules are dynamic polymers that interconvert between phases of growth and shrinkage, yet they provide structural stability to cells. Growth involves hydrolysis of GTP-tubulin to GDP-tubulin, which releases energy that is stored within the microtubule lattice and destabilizes it; a GTP cap at microtubule ends is thought to prevent GDP subunits from rapidly dissociating and causing catastrophe. Here, using in vitro reconstitution assays, we show that GDP-tubulin, usually considered inactive, can itself assemble into microtubules, preferentially at the minus end, and promote persistent growth. GDP-tubulin-assembled microtubules are highly stable, displaying no detectable spontaneous shrinkage. Strikingly, islands of GDP-tubulin within dynamic microtubules stop shrinkage events and promote rescues. Microtubules thus possess an intrinsic capacity for stability, independent of accessory proteins. This finding provides novel mechanisms to explain microtubule dynamics.

Toxoplasma gondii actin filaments are tuned for rapid disassembly and turnover

The cytoskeletal protein actin plays a critical role in the pathogenicity of the intracellular parasite, Toxoplasma gondii, mediating invasion and egress, cargo transport, and organelle inheritance. Advances in live cell imaging have revealed extensive filamentous actin networks in the Apicomplexan parasite, but there are conflicting data regarding the biochemical and biophysical properties of Toxoplasma actin. Here, we imaged the in vitro assembly of individual Toxoplasma actin filaments in real time, showing that native, unstabilized filaments grow tens of microns in length. Unlike skeletal muscle actin, Toxoplasma filaments intrinsically undergo rapid treadmilling due to a high critical concentration, fast monomer dissociation, and rapid nucleotide exchange. Cryo-EM structures of jasplakinolide-stabilized and native (i.e. unstabilized) filaments show an architecture like skeletal actin, with differences in assembly contacts in the D-loop that explain the dynamic nature of the filament, likely a conserved feature of Apicomplexan actin. This work demonstrates that evolutionary changes at assembly interfaces can tune the dynamic properties of actin filaments without disrupting their conserved structure.

Toxoplasma gondii actin filaments are tuned for rapid disassembly and turnover

The cytoskeletal protein actin plays a critical role in the pathogenicity of Toxoplasma gondii, mediating invasion and egress, cargo transport, and organelle inheritance. Advances in live cell imaging have revealed extensive filamentous actin networks in the Apicomplexan parasite, but there is conflicting data regarding the biochemical and biophysical properties of Toxoplasma actin. Here, we imaged the in vitro assembly of individual Toxoplasma actin filaments in real time, showing that native, unstabilized filaments grow tens of microns in length. Unlike skeletal muscle actin, Toxoplasma filaments intrinsically undergo rapid treadmilling due to a high critical concentration, fast monomer dissociation, and rapid nucleotide exchange. Cryo-EM structures of stabilized and unstabilized filaments show an architecture like skeletal actin, with differences in assembly contacts in the D-loop that explain the dynamic nature of the filament, likely a conserved feature of Apicomplexan actin. This work demonstrates that evolutionary changes at assembly interfaces can tune dynamic properties of actin filaments without disrupting their conserved structure.

The Mechanism of Tubulin Assembly into Microtubules: Insights from Structural Studies

Microtubules are cytoskeletal components involved in pivotal eukaryotic functions such as cell division, ciliogenesis, and intracellular trafficking. They assemble from αβ-tubulin heterodimers and disassemble in a process called dynamic instability, which is driven by GTP hydrolysis. Structures of the microtubule and of soluble tubulin have been determined by cryo-EM and by X-ray crystallography, respectively. Altogether, these data define the mechanism of tubulin assembly-disassembly at atomic or near-atomic level. We review here the structural changes that occur during assembly, tubulin switching from a curved conformation in solution to a straight one in the microtubule core. We also present more subtle changes associated with GTP binding, leading to tubulin activation for assembly. Finally, we show how cryo-EM and X-ray crystallography are complementary methods to characterize the interaction of tubulin with proteins involved either in intracellular transport or in microtubule dynamics regulation.

Covalent and non-covalent chemical engineering of actin for biotechnological applications

The cytoskeletal filaments are self-assembled protein polymers with 8-25nm diameters and up to several tens of micrometres length. They have a range of pivotal roles in eukaryotic cells, including transportation of intracellular cargoes (primarily microtubules with dynein and kinesin motors) and cell motility (primarily actin and myosin) where muscle contraction is one example. For two decades, the cytoskeletal filaments and their associated motor systems have been explored for nanotechnological applications including miniaturized sensor systems and lab-on-a-chip devices. Several developments have also revolved around possible exploitation of the filaments alone without their motor partners. Efforts to use the cytoskeletal filaments for applications often require chemical or genetic engineering of the filaments such as specific conjugation with fluorophores, antibodies, oligonucleotides or various macromolecular complexes e.g. nanoparticles. Similar conjugation methods are also instrumental for a range of fundamental biophysical studies. Here we review methods for non-covalent and covalent chemical modifications of actin filaments with focus on critical advantages and challenges of different methods as well as critical steps in the conjugation procedures. We also review potential uses of the engineered actin filaments in nanotechnological applications and in some key fundamental studies of actin and myosin function. Finally, we consider possible future lines of investigation that may be addressed by applying chemical conjugation of actin in new ways.

Steered molecular dynamics analysis of the role of cofilin in increasing the flexibility of actin filaments

Cofilin is one of the most essential regulatory proteins and participates in the process of disassembling actin filaments. Cofilin induces conformational changes to actin filaments, and both the bending and torsional rigidity of the filament. In this study, we investigate the effects of cofilin on the mechanical properties of actin filaments using computational methods. Three models defined by their number of bound cofilins are constructed using coarse-grained MARTINI force field, and they are then extended with steered molecular dynamics simulation. After obtaining the stress-strain curves of the models, we calculate their Young's moduli and other mechanical properties that have not yet been determined for actin filaments. We analyze the cause of the different behaviors of the three models based on their atomistic geometrical differences. Finally, it is demonstrated that cofilin binding causes changes in the distances, angles, and stabilities of the residues in actin filaments.

Cofilin reduces the mechanical properties of actin filaments: approach with coarse-grained methods

An actin filament is an essential cytoskeleton protein in a cell. Various proteins bind to actin for cell functions such as migration, division, and shape control. ADF/cofilin is a protein that severs actin filaments and is related to their dynamics. Actin is known to have excellent mechanical properties. Binding cofilin reduces its mechanical properties, and is related to the severing process. In this research, we applied a coarse-grained molecular dynamics simulation (CGMD) method to obtain actin filaments and cofilin-bound actin (cofilactin) filaments. Using these two obtained models, we constructed an elastic network model-based structure and conducted a normal mode analysis. Based on the low-frequency normal modes of the filament structure, we applied the continuum beam theory to calculate the mechanical properties of the actin and cofilactin filaments. The CGMD method provided structurally accurate actin and cofilactin filaments in relation to the mechanical properties, which showed good agreement with the established experimental results.

The role of vimentin intermediate filaments in cortical and cytoplasmic mechanics

The mechanical properties of a cell determine many aspects of its behavior, and these mechanics are largely determined by the cytoskeleton. Although the contribution of actin filaments and microtubules to the mechanics of cells has been investigated in great detail, relatively little is known about the contribution of the third major cytoskeletal component, intermediate filaments (IFs). To determine the role of vimentin IF (VIF) in modulating intracellular and cortical mechanics, we carried out studies using mouse embryonic fibroblasts (mEFs) derived from wild-type or vimentin(-/-) mice. The VIFs contribute little to cortical stiffness but are critical for regulating intracellular mechanics. Active microrheology measurements using optical tweezers in living cells reveal that the presence of VIFs doubles the value of the cytoplasmic shear modulus to ∼10 Pa. The higher levels of cytoplasmic stiffness appear to stabilize organelles in the cell, as measured by tracking endogenous vesicle movement. These studies show that VIFs both increase the mechanical integrity of cells and localize intracellular components.

Sodium selenite alters microtubule assembly and induces apoptosis in vitro and in vivo

Background

Previous studies demonstrated that selenite induced cancer-cell apoptosis through multiple mechanisms; however, effects of selenite on microtubules in leukemic cells have not been demonstrated.

Methods

The toxic effect of selenite on leukemic HL60 cells was performed with cell counting kit 8. Selenite effects on cell cycle distribution and apoptosis induction were determined by flow cytometry. The contents of cyclin B1, Mcl-1, AIF, cytochrome C, insoluble and soluble tubulins were detected with western blotting. Microtubules were visualized with indirect immunofluorescence microscopy. The interaction between CDK1 and Mcl-1 was assessed with immunoprecipitation. Decreasing Mcl-1 and cyclin B1 expression were carried out through siRNA interference. The alterations of Mcl-1 and cyclin B1 in animal model were detected with either immunohistochemical staining or western blotting. In situ detection of apoptotic ratio was performed with TUNEL assay.

Results

Our current results showed that selenite inhibited the growth of HL60 cells and induced mitochondrial-related apoptosis. Furthermore, we found that microtubule assembly in HL60 cells was altered, those cells were arrested at G2/M phase, and Cyclin B1 was up-regulated and interacted with CDK1, which led to down-regulation of the anti-apoptotic protein Mcl-1. Finally, in vivo experiments confirmed the in vitro microtubule disruption effect and alterations in Cyclin B1 and Mcl-1 levels by selenite.

Conclusions

Taken together, the results from our study indicate that microtubules are novel targets of selenite in leukemic HL60 cells.

The mechanisms of microtubule catastrophe and rescue: implications from analysis of a dimer-scale computational model

ETOC: The behavior of a dimer-scale computational model predicts that short interprotofilament “cracks” (laterally unbonded regions between protofilaments) exist even at the tips of growing MTs and that rapid fluctuations in the depths of these cracks govern both catastrophe and rescue.

Microtubule (MT) dynamic instability is fundamental to many cell functions, but its mechanism remains poorly understood, in part because it is difficult to gain information about the dimer-scale events at the MT tip. To address this issue, we used a dimer-scale computational model of MT assembly that is consistent with tubulin structure and biochemistry, displays dynamic instability, and covers experimentally relevant spans of time. It allows us to correlate macroscopic behaviors (dynamic instability parameters) with microscopic structures (tip conformations) and examine protofilament structure as the tip spontaneously progresses through both catastrophe and rescue. The model's behavior suggests that several commonly held assumptions about MT dynamics should be reconsidered. Moreover, it predicts that short, interprotofilament “cracks” (laterally unbonded regions between protofilaments) exist even at the tips of growing MTs and that rapid fluctuations in the depths of these cracks influence both catastrophe and rescue. We conclude that experimentally observed microtubule behavior can best be explained by a “stochastic cap” model in which tubulin subunits hydrolyze GTP according to a first-order reaction after they are incorporated into the lattice; catastrophe and rescue result from stochastic fluctuations in the size, shape, and extent of lateral bonding of the cap.

Mechanochemical modeling of dynamic microtubule growth involving sheet-to-tube transition

Microtubule dynamics is largely influenced by nucleotide hydrolysis and the resultant tubulin configuration changes. The GTP cap model has been proposed to interpret the stabilizing mechanisms of microtubule growth from the view of hydrolysis effects. Besides, the growth of a microtubule involves the closure of a curved sheet at its growing end. The curvature conversion from the longitudinal direction to the circumferential direction also helps to stabilize the successive growth, and the curved sheet is referred to as the conformational cap. However, there still lacks theoretical investigation on the mechanical–chemical coupling growth process of microtubules. In this paper, we study the growth mechanisms of microtubules by using a coarse-grained molecular method. First, the closure process involving a sheet-to-tube transition is simulated. The results verify the stabilizing effect of the sheet structure and predict that the minimum conformational cap length that can stabilize the growth is two dimers. Then, we show that the conformational cap and the GTP cap can function independently and harmoniously, signifying the pivotal role of mechanical factors. Furthermore, based on our theoretical results, we describe a Tetris-like growth style of microtubules: the stochastic tubulin assembly is regulated by energy and harmonized with the seam zipping such that the sheet keeps a practically constant length during growth.

Coarse-grained mechanochemical model for simulating the dynamic behavior of microtubules

Modeling the structure and mechanics of microtubules, which play significant roles in various physiological functions of cells, has long been a fascinating issue. In this paper, a coarse-grained mechanochemical model is presented to study the mechanical-chemical coupling and dynamic attributes of microtubules. The interactions among tubulins are taken into account from the molecular basis. This model is used to characterize the conformations of sheet-ended microtubules, to analyze the distributions of interaction energy, and further to simulate the radial indentation process of a microtubule. This method also works for investigating the dynamic properties of microtubules, e.g., their assembly, growth, deformation, and structural evolution for different conditions. This study is helpful for understanding the structure-mechanics-function relationship of microtubules and lays a foundation for further investigation of their dynamic behavior.

A central role for the WH2 domain of Srv2/CAP in recharging actin monomers to drive actin turnover in vitro and in vivo

Cellular processes propelled by actin polymerization require rapid disassembly of filaments, and then efficient recycling of ADF/cofilin-bound ADP-actin monomers back to an assembly-competent ATP-bound state. How monomer recharging is regulated in vivo is still not well understood, but recent work suggests the involvement of the ubiquitous actin-monomer binding protein Srv2/CAP. To better understand Srv2/CAP mechanism, we explored the contribution of its WH2 domain, the function of which has remained highly elusive. We found that the WH2 domain binds to actin monomers and, unlike most other WH2 domains, exhibits similar binding affinity for ATP-actin and ADP-actin (K(d) approximately 1.5 microM). Mutations in the WH2 domain that impair actin binding disrupt the ability of purified full-length Srv2/CAP to catalyze nucleotide exchange on ADF/cofilin-bound actin monomers and accelerate actin turnover in vitro. The same mutations impair Srv2/CAP function in vivo in regulating actin organization, cell growth, and cell morphogenesis. Thus, normal cell growth and organization depend on the ability of Srv2/CAP to recharge actin monomers, and the WH2 domain plays a central role in this process. Our data also reveal that while most isolated WH2 domains inhibit nucleotide exchange on actin, WH2 domains in the context of intact proteins can help promote nucleotide exchange.

GDP-tubulin incorporation into growing microtubules modulates polymer stability

Microtubule growth proceeds through the endwise addition of nucleotide-bound tubulin dimers. The microtubule wall is composed of GDP-tubulin subunits, which are thought to come exclusively from the incorporation of GTP-tubulin complexes at microtubule ends followed by GTP hydrolysis within the polymer. The possibility of a direct GDP-tubulin incorporation into growing polymers is regarded as hardly compatible with recent structural data. Here, we have examined GTP-tubulin and GDP-tubulin incorporation into polymerizing microtubules using a minimal assembly system comprised of nucleotide-bound tubulin dimers, in the absence of free nucleotide. We find that GDP-tubulin complexes can efficiently co-polymerize with GTP-tubulin complexes during microtubule assembly. GDP-tubulin incorporation into microtubules occurs with similar efficiency during bulk microtubule assembly as during microtubule growth from seeds or centrosomes. Microtubules formed from GTP-tubulin/GDP-tubulin mixtures display altered microtubule dynamics, in particular a decreased shrinkage rate, apparently due to intrinsic modifications of the polymer disassembly properties. Thus, although microtubules polymerized from GTP-tubulin/GDP-tubulin mixtures or from homogeneous GTP-tubulin solutions are both composed of GDP-tubulin subunits, they have different dynamic properties, and this may reveal a novel form of microtubule "structural plasticity."

Mechanism of depolymerization and severing of actin filaments and its significance in cytoskeletal dynamics

The actin cytoskeleton is one of the major structural components of the cell. It often undergoes rapid reorganization and plays crucial roles in a number of dynamic cellular processes, including cell migration, cytokinesis, membrane trafficking, and morphogenesis. Actin monomers are polymerized into filaments under physiological conditions, but spontaneous depolymerization is too slow to maintain the fast actin filament dynamics observed in vivo. Gelsolin, actin-depolymerizing factor (ADF)/cofilin, and several other actin-severing/depolymerizing proteins can enhance disassembly of actin filaments and promote reorganization of the actin cytoskeleton. This review presents advances as well as a historical overview of studies on the biochemical activities and cellular functions of actin-severing/depolymerizing proteins.

The GAPs, GEFs, and GDIs of heterotrimeric G-protein alpha subunits

The heterotrimeric G-protein alpha subunit has long been considered a bimodal, GTP-hydrolyzing switch controlling the duration of signal transduction by seven-transmembrane domain (7TM) cell-surface receptors. In 1996, we and others identified a superfamily of “regulator of G-protein signaling” (RGS) proteins that accelerate the rate of GTP hydrolysis by Gα subunits (dubbed GTPase-accelerating protein or “GAP” activity). This discovery resolved the paradox between the rapid physiological timing seen for 7TM receptor signal transduction in vivo and the slow rates of GTP hydrolysis exhibited by purified Gα subunits in vitro. Here, we review more recent discoveries that have highlighted newly-appreciated roles for RGS proteins beyond mere negative regulators of 7TM signaling. These new roles include the RGS-box-containing, RhoA-specific guanine nucleotide exchange factors (RGS-RhoGEFs) that serve as Gα effectors to couple 7TM and semaphorin receptor signaling to RhoA activation, the potential for RGS12 to serve as a nexus for signaling from tyrosine kinases and G-proteins of both the Gα and Ras-superfamilies, the potential for R7-subfamily RGS proteins to couple Gα subunits to 7TM receptors in the absence of conventional Gβγ dimers, and the potential for the conjoint 7TM/RGS-box Arabidopsis protein AtRGS1 to serve as a ligand-operated GAP for the plant Gα AtGPA1. Moreover, we review the discovery of novel biochemical activities that also impinge on the guanine nucleotide binding and hydrolysis cycle of Gα subunits: namely, the guanine nucleotide dissociation inhibitor (GDI) activity of the GoLoco motif-containing proteins and the 7TM receptor-independent guanine nucleotide exchange factor (GEF) activity of Ric‑8/synembryn. Discovery of these novel GAP, GDI, and GEF activities have helped to illuminate a new role for Gα subunit GDP/GTP cycling required for microtubule force generation and mitotic spindle function in chromosomal segregation.

Role of cumulus cells during maturation of porcine oocytes in the rise in intracellular Ca2+ induced by inositol 1,4,5-trisphosphate

At the time of fertilization, release of inositol 1,4,5-trisphosphate (IP3) into the cytoplasm of oocytes is said to be induced by hydrolysis of phosphatidylinositol bis phosphate (PI2) via activation of phospholipase C and is responsible for the Ca2+ oscillation in oocytes immediately after sperm penetration. On the other hand, cumulus cells have been reported to play an important role in cytoplasmic maturation of mammalian oocytes and to affect embryonic development after fertilization. To obtain more information on the role of cumulus cells in cytoplasmic maturation of oocytes, the effects of cumulus cells on the rise in [Ca2+]i and the rates of activation and development of porcine mature oocytes induced by IP3 injection were investigated. Mature porcine oocytes that had been denuded of their cumulus cells in the early stage of the maturation period had a depressed rise in [Ca2+]i (4.0-6.0) and reduced rates of activation (31.4-36.8%) and development (10.0-24.4%) induced by IP3 injection compared with those of their cumulus-enclosed counterparts (7.3, 69.1% and 43.8%; P < 0.05). The [Ca2+]i rise and the rates of activation and development depressed by the removal of cumulus cells were restored by adding pyruvate to the maturation medium. Furthermore, the IP3 injection-induced depression of [Ca2+]i rise in mature oocytes derived from cumulus-denuded oocytes (DOs) was restored when they were cultured in a medium with pyruvate (3.9-6.3, P < 0.05). Also, mature oocytes from cumulus-oocyte complexes (COCs) cultured in a medium without glucose had a lower rise in [Ca2+]i than that in mature oocytes from COCs cultured with glucose (7.4-6.0, P < 0.05). Cumulus cells supported porcine oocytes during maturation in the rise in [Ca2+]i induced by IP3 and the following activation and development of porcine oocytes after injection of IP3. Moreover, we inferred that a function of cumulus cells is to produce pyruvate by metabolizing glucose and to provide oocytes with pyruvate during maturation, thereby promoting oocyte sensitivity to IP3.

Microtubule's conformational cap

The molecular mechanisms that allow elongation of the unstable microtubule lattice remain unclear. It is usually thought that the GDP-liganded tubulin lattice is capped by a small layer of GTP- or GDP-Pi-liganded molecules, the so called "GTP-cap". Here, we point-out that the elastic properties of the microtubule lattice cause a difference in stability between the elongating tubulin sheet and the completed microtubule wall. The implications of our observations for microtubule structure and dynamics are discussed.

A new ATP-binding fold in actin, hexokinase and Hsc70

One of a cell biologist's favourite occupations is to discover the proteins that perform newly described functions in the cell. Very often lately, this has resulted in the identification of protein families whose related amino acid sequences reflect similar functions, but can proteins with totally unrelated sequences have similar structures and functions? In this review, Ken Holmes, Chris Sander and Alfonso Valencia describe the structural similarities between three well-known proteins that have no readily detectable primary sequence similarities but for which X-ray crystallography has revealed very similar structures. A comparison of their structures provides insights into their common mechanisms of action and into protein evolution, and has been used to detect related proteins in sequence data bases.

Microscopic analysis of polymerization dynamics with individual actin filaments

The polymerization-depolymerization dynamics of actin is a key process in a variety of cellular functions. Many spectroscopic studies have been performed in solution, but studies on single actin filaments have just begun. Here, we show that the time course of polymerization of individual filaments consists of a polymerization phase and a subsequent steady-state phase. During the steady-state phase, a treadmilling process of elongation at the barbed end and shortening at the pointed end occurs, in which both components of the process proceed at approximately the same rate. The time correlation of length fluctuation of the filaments in the steady-state phase showed that the polymerization-depolymerization dynamics follow a diffusion (stochastic) process, which cannot be explained by simple association and dissociation of monomers at both ends of the filaments.

Role of the DNase-I-binding loop in dynamic properties of actin filament

Effects of proteolytic modifications of the DNase-I-binding loop (residues 39-51) in subdomain 2 of actin on F-actin dynamics were investigated by measuring the rates of the polymer subunit exchange with the monomer pool at steady state and of ATP hydrolysis associated with it, and by determination of relative rate constants for monomer addition to and dissociation from the polymer ends. Cleavage of actin between Gly-42 and Val-43 by protease ECP32 resulted in enhancement of the turnover rate of polymer subunits by an order of magnitude or more, in contrast to less than a threefold increase produced by subtilisin cleavage between Met-47 and Gly-48. Probing the structure of the modified actins by limited digestion with trypsin revealed a correlation between the increased F-actin dynamics and a change in the conformation of subdomain 2, indicating a more open state of the filament subunits relative to intact F-actin. The cleavage with trypsin and steady-state ATPase were cooperatively inhibited by phalloidin, with half-maximal effects at phalloidin to actin molar ratio of 1:8 and full inhibition at a 1:1 ratio. The results support F-actin models in which only the N-terminal segment of loop 39-51 is involved in monomer-monomer contacts, and suggest a possibility of regulation of actin dynamics in the cell through allosteric effects on this segment of the actin polypeptide chain.

Fluorescence study of the high pressure-induced denaturation of skeletal muscle actin

Ikkai & Ooi [Ikkai, T. & Ooi, T. (1966) Biochemistry 5, 1551-1560] made a thorough study of the effect of pressure on G- and F-actins. However, all of the measurements in their study were made after the release of pressure. In the present experiment in situ observations were attempted by using epsilon ATP to obtain further detailed kinetic and thermodynamic information about the behaviour of actin under pressure. The dissociation rate constants of nucleotides from actin molecules (the decay curve of the intensity of fluorescence of epsilon ATP-G-actin or epsilon ADP-F-actin) followed first-order kinetics. The volume changes for the denaturation of G-actin and F-actin were estimated to be -72 mL x mol(-1) and -67 mL x mol(-1) in the presence of ATP, respectively. Changes in the intensity of fluorescence of F-actin whilst under pressure suggested that epsilon ADP-F-actin was initially depolymerized to epsilon ADP-G-actin; subsequently there was quick exchange of the epsilon ADP for free epsilon ATP, and then polymerization occurred again with the liberation of phosphate from epsilon ATP bound to G-actin in the presence of excess ATP. In the higher pressure range (> 250 MPa), the partial collapse of the three-dimensional structure of actin, which had been depolymerized under pressure, proceeded immediately after release of the nucleotide, so that it lost the ability to exchange bound ADP with external free ATP and so was denatured irreversibly. An experiment monitoring epsilon ATP fluorescence also demonstrated that, in the absence of Mg(2+)-ATP, the dissociation of actin-heavy meromyosin (HMM) complex into actin and HMM did not occur under high pressure.

The actin-depolymerizing factor destrin has an actin-stabilizing domain

Destrin is a 19 kDa actin-depolymerizing protein of the ADF–cofilin family. Destrin was digested with trypsin to a structurally stable 9.2 kDa fragment that contains the actin-binding sequence. The purified 9.2 kDa fragment has an actin filament stabilizing activity, rather than an actin filament depolymerizing activity. The deleted region is probably essential for the actin filament depolymerizing activity of intact destrin. Surprisingly, the 9.2 kDa fragment also has an assembly-promoting activity in the absence of ATP.Key words: actin, destrin, cofilin, ADF.

Functional specificity of actin isoforms

Actin, one of the main proteins of muscle and cytoskeleton, exists as a variety of highly conserved isoforms whose distribution in vertebrates is tissue-specific. Synthesis of specific actin isoforms is accompanied by their subcellular compartmentalization, with both processes being regulated by factors of cell proliferation and differentiation. Actin isoforms cannot substitute for each other, and the high-level synthesis of exogenous actins leads to alterations in cell organization and morphology. This indicates that the highly conserved actins are functionally specialized for the tissues in which they predominate. The first goal of this review is to analyze the data on the polymerizability of actin isoforms to show that cytoskeleton isoactins form less stable polymers than skeletal muscle actin. This difference correlates with the dynamics of actin microfilaments versus the stability of myofibrillar systems. The three-dimensional actin structure as well as progress in the analysis of conformational changes in both the actin monomer and the filament allows us to view the data on the structure and polymerization of isoactins in terms of structure-function relationships within the actin molecule. Most of the amino acid substitutions that distinguish actin isoforms are located apart from actin-actin contact sites in the polymer. We suggest that these substitutions can modulate the ability of actin monomers to form more or less stable polymers by long-range (allosteric) regulation of the contact sites.

IFN-gamma-induced change in microtubule organization and alpha-tubulin expression during growth inhibition of lung squamous carcinoma cells

In cultures of KNS-62 cells derived from a human lung squamous cell carcinoma, the initial growth arrest in the continuous presence of interferon-gamma (IFN-gamma) turned to cytopathic effects after 2 days of treatment. The remaining viable cells showed grossly distorted morphology, with enlargement and extensions up to 5 cell diameters. The presence of apoptotic cells was shown 3 days after treatment with IFN-gamma. Immunocytochemically, the microtubular structures appeared augmented and highly aggregated. The level of alpha-tubulin-specific mRNA was distinctly increased after administration of IFN-gamma, and the amount of extractable alpha-tubulin protein was reduced. In parallel kinetics experiments, growth arrest by serum depletion or by contact inhibition during confluence resulted in reduced levels of alpha-tubulin-specific mRNA and in slightly elevated alpha-tubulin protein. The IFN-gamma-induced effects suggest interference with assembly or maintenance of the tubulin cable network, presumably associated with cell deformation and cytotoxicity.

Structural transitions at microtubule ends correlate with their dynamic properties in Xenopus egg extracts

Microtubules are dynamically unstable polymers that interconvert stochastically between growing and shrinking states by the addition and loss of subunits from their ends. However, there is little experimental data on the relationship between microtubule end structure and the regulation of dynamic instability. To investigate this relationship, we have modulated dynamic instability in Xenopus egg extracts by adding a catastrophe-promoting factor, Op18/stathmin. Using electron cryomicroscopy, we find that microtubules in cytoplasmic extracts grow by the extension of a two- dimensional sheet of protofilaments, which later closes into a tube. Increasing the catastrophe frequency by the addition of Op18/stathmin decreases both the length and frequency of the occurrence of sheets and increases the number of frayed ends. Interestingly, we also find that more dynamic populations contain more blunt ends, suggesting that these are a metastable intermediate between shrinking and growing microtubules. Our results demonstrate for the first time that microtubule assembly in physiological conditions is a two-dimensional process, and they suggest that the two-dimensional sheets stabilize microtubules against catastrophes. We present a model in which the frequency of catastrophes is directly correlated with the structural state of microtubule ends.

Microtubules switch occasionally into unfavorable configurations during elongation

Tubulin assembles to form a range of structures that differ by their protofilament and monomer helix-start numbers. The microtubule lattice is believed to accommodate these different configurations by skewing the protofilaments so that the lateral interactions between tubulin subunits are maintained. Here, we present the characterization of 14 types of microtubules, including six novel ones, through an extensive analysis of microtubules assembled in vitro from pure tubulin. Although the six new types represented only 1 % of the total length of the population examined ( approximately 17 mm), they define the limits of microtubule structure and assembly. Protofilament skewing is restricted to within +/-2 degrees. Outside this range, the restoring force induced by the skewed protofilaments is compensated by a longitudinal shift (less than +/-0.2 nm) between adjacent protofilaments. Configurations with theoretical protofilament skew angles larger than +/-4 degrees or that necessitate larger modifications of the microtubule surface lattice were not observed. Analysis of the microtubule types distribution reveals that it is sharply peaked around the less skewed conformations. These results indicate that both the flexibility of the protofilaments and the strength of their lateral interactions restrict the range of structures assembled. They also demonstrate that growing microtubules can occasionally switch into energetically unfavorable configurations, a behavior that may account for the stochastic nature of catastrophes.

Actin filaments are severed by both native and recombinant dictyostelium cofilin but to different extents

Cofilin has been reported to depolymerize F-actin alternately by either severing filaments to increase the number of depolymerizing ends or by increasing the off-rate of monomers from F-actin without increasing the number of filament ends. We have compared directly the ability of native and recombinant cofilins from Dictyostelium to sever F-actin. Our results demonstrate that native cofilin has a higher level of severing activity than recombinant cofilin. Significantly, the measurement of cofilin's severing activity by two independent methods, direct visualization with an improved light microscope assay and by scoring of the number of pointed ends by DNase I binding, clearly shows that both native and recombinant cofilins sever F-actin but to different extents. The severing activity in preparations of recombinant cofilin is variable depending on the method of preparation and, in some cases, is difficult to detect by microscopy assays. This latter point is particularly significant because it may lead to the conclusion that cofilin severs weakly or not at all depending on its method of isolation.

A novel virus-host cell membrane interaction. Membrane voltage-dependent endocytic-like entry of bacteriophage straight phi6 nucleocapsid

Studies on the virus-cell interactions have proven valuable in elucidating vital cellular processes. Interestingly, certain virus-host membrane interactions found in eukaryotic systems seem also to operate in prokaryotes (Bamford, D.H., M. Romantschuk, and P. J. Somerharju, 1987. EMBO (Eur. Mol. Biol. Organ.) J. 6:1467-1473; Romantschuk, M., V.M. Olkkonen, and D.H. Bamford. 1988. EMBO (Eur. Mol. Biol. Organ.) J. 7:1821-1829). straight phi6 is an enveloped double-stranded RNA virus infecting a gram-negative bacterium. The viral entry is initiated by fusion between the virus membrane and host outer membrane, followed by delivery of the viral nucleocapsid (RNA polymerase complex covered with a protein shell) into the host cytosol via an endocytic-like route. In this study, we analyze the interaction of the nucleocapsid with the host plasma membrane and demonstrate a novel approach for dissecting the early events of the nucleocapsid entry process. The initial binding of the nucleocapsid to the plasma membrane is independent of membrane voltage (DeltaPsi) and the K(+) and H(+) gradients. However, the following internalization is dependent on plasma membrane voltage (DeltaPsi), but does not require a high ATP level or K(+) and H(+) gradients. Moreover, the nucleocapsid shell protein, P8, is the viral component mediating the membrane-nucleocapsid interaction.

Rapid treadmilling of brain microtubules free of microtubule-associated proteins in vitro and its suppression by tau

We have determined the treadmilling rate of brain microtubules (MTs) free of MT-associated proteins (MAPs) at polymer mass steady state in vitro by using [(3)H]GTP-exchange. We developed buffer conditions that suppressed dynamic instability behavior by approximately 10-fold to minimize the contribution of dynamic instability to total tubulin-GTP exchange. The MTs treadmilled rapidly under the suppressed dynamic instability conditions, at a minimum rate of 0.2 micrometer/min. Thus, rapid treadmilling is an intrinsic property of MAP-free MTs. Further, we show that tau, an axonal stabilizing MAP involved in Alzheimer's disease, strongly suppresses the treadmilling rate. These results indicate that tau's function in axons might involve suppression of axonal MT treadmilling. We describe mathematically how treadmilling and dynamic instability are mechanistically distinct MT behaviors. Finally, we present a model that explains how small changes in the critical tubulin subunit concentration at MT minus ends, caused by intrinsic differences in rate constants or regulatory proteins, could produce large changes in the treadmilling rate.

OP18/stathmin binds near the C-terminus of tubulin and facilitates GTP binding

It is has been previously suggested that the protein Op18/stathmin may interact with tubulin via the alpha-tubulin subunit [Larsson, N., Marklund, U., Melander Gradin, H., Brattsand, G. & Gullberg, M. (1997) Mol. Cell. Biol. 17, 5530-5539]. In this study we have used limited proteolysis and cross-linking analysis to localize further the stathmin-binding site on alpha-tubulin. Our results indicate that such a binding site is in a region close to the C-terminus of the molecule comprising residues 307 to the subtilisin-cleavage site on the alpha-tubulin subunit. Based on a recent model of the structure of tubulin [Nogales, E., Wolf, S.G. & Dowing, D.H. (1998) Nature (London) 391, 199-203], we found that this region contained the same areas that may be involved in longitudinal contacts of alpha-tubulin subunits within the microtubule. We also observed that the binding of stathmin to tubulin can modulate the binding of GTP to tubulin, as a consequence of a conformational change in the beta-tubulin subunit that occurs upon interaction of stathmin with tubulin.

G protein alpha subunits activate tubulin GTPase and modulate microtubule polymerization dynamics

G proteins serve many functions involving the transfer of signals from cell surface receptors to intracellular effector molecules. Considerable evidence suggests that there is an interaction between G proteins and the cytoskeleton. In this report, G protein alpha subunits Gi1alpha, Gsalpha, and Goalpha are shown to activate the GTPase activity of tubulin, inhibit microtubule assembly, and accelerate microtubule dynamics. Gialpha inhibited polymerization of tubulin-GTP into microtubules by 80-90% in the absence of exogenous GTP. Addition of exogenous GTP, but not guanylylimidodiphosphate, which is resistant to hydrolysis, overcame the inhibition. Analysis of the dynamics of individual microtubules by video microscopy demonstrated that Gi1alpha increases the catastrophe frequency, the frequency of transition from growth to shortening. Thus, Galpha may play a role in modulating microtubule dynamic instability, providing a mechanism for the modification of the cytoskeleton by extracellular signals.

Polyproline binding is an essential function of human profilin in yeast

Structural analysis of human profilin has revealed two tryptophan residues, W3 and W31, which interact with polyproline. The codons for these residues were mutated to encode phenylalanine and the mutant proteins overexpressed in Eschericia coli. The isolated proteins were diminished in their ability to bind polyproline, whereas phosphatidylinositol 4,5-bisphosphate (PIP2) binding remained unchanged. In many strains of Saccharomyces cerevisiae, disruption of the gene encoding profilin, PFY1, is lethal. It was found that expression of the gene for human profilin is capable of suppressing this lethality. The polyproline-binding mutant alleles of the human gene were cloned into various yeast expression vectors. Each of the mutant genes resulted in suppression of the lethality of pfy1Delta. It was observed that the mutant protein expression levels paralleled the growth rates of the strains. The severity of various morphological abnormalities of the strains was also attenuated with increased protein levels, suggesting that profilin polyproline-binding mutations are deleterious to cell growth unless overexpressed. Both tryptophan mutations were combined to give a third mutant allele that was found both unable to bind polyproline and to suppress the lethality of a pfy1 deletion. Immunoprecipitation experiments suggested that the mutants were unaltered in their affinity for actin and PIP2. These data strongly suggest that polyproline binding is an essential function of profilin.

Morphological transformation of liposomes caused by assembly of encapsulated tubulin and determination of shape by microtubule-associated proteins (MAPs)

To examine the role of cytoskeletons in cellular morphogenesis, we generated liposomes encapsulating tubulin, with or without microtubule-associated proteins (MAPs), and observed their transformation using dark-field microscopy. When tubulin was polymerized with MAPs in liposomes, liposomes were transformed into a "bipolar" shape with a central sphere and two tubular membrane protrusions that aligned in a straight line. On the other hand, when pure tubulin was polymerized in liposomes without MAPs, they initially transformed into a bipolar shape but subsequently re-transformed into a "monopolar" shape, i.e. a sphere with only one straight tubular portion. This re-transformation occurred in two ways: first, by shortening of one of the tubular portions due to microtubule disassembly; or second, by fluctuation of the central sphere toward one of the ends without shortening of the tube portion. MAPs prevented this re-transformation, and their role in stabilizing the shape of transformed liposomes was studied by the co-sedimentation method. The results show that MAPs, particularly MAP1 and MAP2, mediate binding between microtubules and the liposomal membrane. However, MAP2 by itself did not bind to liposomes, but was able to stabilize bipolar liposomes. This stabilization is caused not only by direct links between microtubules and liposomes, but also by prevention of Brownian motion of microtubules through an increase in friction.

Mollicutes-wall-less bacteria with internal cytoskeletons

The structure and motility of the Mollicutes (Spiroplasma, Mycoplasma, and Acholeplasma) are briefly reviewed. The data are presented from the perspective of prokaryotic and eukaryotic motors, cytoskeletons, and cell motility. The Mollicutes are eubacteria derived from Clostridia by regressive evolution and genome reduction to produce the smallest and simplest free-living and self-replicating cells. Structurally, the Mollicutes are characterized by a complete lack of a cell wall and the presence of an internal cytoskeleton. Spiroplasma, which are helical cells with a flat, ribbon-like cytoskeleton, are amenable to structural and geometrical analysis. Motility and shape changes can be explained and modeled by the cytoskeleton acting as a linear motor.

A role for microtubule dynamics in phagosome movement

We have shown previously that intracellular phagosome movement requires microtubules. Here we provide evidence that within cells phagosomes display two different kinds of microtubule-based movements in approximately equal proportions. The first type occurs predominantly in the cell periphery, often shortly after the phagosome is formed, and at speeds below 0.1 microm/second. The second is faster (0.2-1.5 micron/second) and occurs mainly after phagosomes have reached the cell interior. Treating cells with nanomolar concentrations of taxol or nocodazole alters microtubule dynamics without affecting either total polymer mass or microtubule organisation. Such treatments slow the accumulation of phagosomes in the perinuclear region and reduce the number of slow movements by up to 50% without affecting the frequency of fast movements. This suggests that a proportion of slow movements are mediated by microtubule dynamics while fast movements are powered by microtubule motors. In macrophages, interphase microtubules radiate from the microtubule organising centre with their plus-end towards the cell periphery. To understand the behaviour of ‘early’ phagosomes at the cell periphery we investigated their ability to bind microtubule plus-ends in vitro. We show that early phagosomes have a strong preference for microtubule plus-ends, whereas ‘late’ phagosomes do not, and that plus-end affinity requires the presence of microtubule-associated proteins within cytosol. We suggest that phagosomes can bind to the plus-ends of dynamic microtubules and move by following their shrinkage or growth.

Microtubule polymerization dynamics

The polymerization dynamics of microtubules are central to their biological functions. Polymerization dynamics allow microtubules to adopt spatial arrangements that can change rapidly in response to cellular needs and, in some cases, to perform mechanical work. Microtubules utilize the energy of GTP hydrolysis to fuel a unique polymerization mechanism termed dynamic instability. In this review, we first describe progress toward understanding the mechanism of dynamic instability of pure tubulin and then discuss the function and regulation of microtubule dynamic instability in living cells.

Is signal transduction modulated by an interaction between heterotrimeric G-proteins and tubulin?

Although it is generally accepted that tubulin plays an important role in G-protein-mediated signal transduction in a variety of systems, the mechanism of this phenomenon is not completely understood. G-protein-tubulin interaction at the cell membrane and the cytosol, and the influence of such an interaction on cellular signaling are discussed in this review article. Because the diameter of a microtubule is 25 nm and the plasma membrane is 9-11 nm thick, it is not possible for membrane-associated tubulin to assemble into a complete microtubule in the membrane environment. However, tubulin heterodimers may be able to function in the membrane environment as individual heterodimers or as polymers arranged into short protofilaments. At the cell membrane, membrane-associated tubulin may influence hormone-receptor interaction, receptor-G-protein coupling, and G-protein-effector coupling. Structural proteins, such as tubulin, can participate in cellular signaling by communicating through physical forces. By virtue of its interaction with the submembranous network of cytoskeletal proteins, tubulin, when perturbed in one locus, can transmit large changes in conformations to other points. Thus, GTP binding to membrane-associated tubulin might lead to a conformational change in either receptors or G proteins. This may, in turn, influence the binding of an agonist to its receptor. On the other hand, in the cell cytosol, subsequent to agonist-induced translocation of G-proteins from the membrane compartment to the cytosol, G-proteins may affect microtubule formation. In GH3 and AtT-20 cells (stably expressing TRH receptor), transiently transfected with Gq alpha cDNA, soluble tubulin levels decreased in Gq alpha-transfected GH3 and AtT-20 cells, by 33% and 52%, respectively. These results suggest that G-proteins may have a direct effect on the microtubule function in vivo. Because tubulin and G-protein families are ubiquitous and highly conserved, an interaction between these two protein families may occur in vivo, and this, in turn, can have an impact on signal transduction. However, the physiological significance of this interaction remains to be demonstrated.

Stabilization of microtubule dynamics by estramustine by binding to a novel site in tubulin: a possible mechanistic basis for its antitumor action

The cellular targets for estramustine, an antitumor drug used in the treatment of hormone-refractory prostate cancer, are believed to be the spindle microtubules responsible for chromosome separation at mitosis. Estramustine only weakly inhibits polymerization of purified tubulin into microtubules by binding to tubulin (Kd, approximately 30 microM) at a site distinct from the colchicine or the vinblastine binding sites. However, by video microscopy, we find that estramustine strongly stabilizes growing and shortening dynamics at plus ends of bovine brain microtubules devoid of microtubule-associated proteins at concentrations substantially below those required to inhibit polymerization of the microtubules. Estramustine strongly reduced the rate and extent both of shortening and growing, increased the percentage of time the microtubules spent in an attenuated state, neither growing nor shortening detectably, and reduced the overall dynamicity of the microtubules. Significantly, the combined suppressive effects of vinblastine and estramustine on the rate and extent of shortening and dynamicity were additive. Thus, like the antimitotic mechanisms of action of the antitumor drugs vinblastine and taxol, the antimitotic mechanism of action of estramustine may be due to kinetic stabilization of spindle microtubule dynamics. The results may explain the mechanistic basis for the benefit derived from combined use of estramustine with vinblastine or taxol, two other drugs that target microtubules, in the treatment of hormone-refractory prostate cancer.

A putative beta-tubulin phosphate-binding motif is involved in lateral microtubule protofilament interactions

We have investigated the role of a putative GTP-binding beta-tubulin motif in microtubule polymerization. A peptide containing residues 126-142 of the beta-tubulin subunit (peptide G) was synthesised and an antibody against it raised. Peptide G prevents the binding of GTP to tubulin and also microtubule polymerization but not the formation of vinblastine-induced tubulin spirals, suggesting that it may prevent lateral but not longitudinal tubulin-tubulin interactions. The antibody to peptide G shows little reaction with the interphase microtubule network, mitotic spindles or midbody of cultured cells, whereas it clearly reacts with vinblastine-induced paracrystals. These results suggest that this putative phosphate-binding site present in beta-tubulin could be involved in the lateral tubulin-tubulin interactions along the microtubule structure.

Hydrolysis of GTP associated with the formation of tubulin oligomers is involved in microtubule nucleation

Hydrolysis of GTP is known to accompany microtubule assembly. Here we show that hydrolysis of GTP is also associated with the formation of linear oligomers of tubulin, which are precursors (prenuclei) in microtubule assembly. The hydrolysis of GTP on these linear oligomers inhibits the lateral association of GTP-tubulin that leads to the formation of a bidimensional lattice. Therefore GTP hydrolysis interferes with the nucleation of microtubules. Linear oligomers are also formed in mixtures of GTP-tubulin and GDP-tubulin. The hydrolysis of GTP associated with heterologous interactions between GTP-tubulin and GDP-tubulin in the cooligomer takes place at a threefold faster rate than upon homologous interactions between GTP-tubulins. The implication of these results in a model of vectorial GTP hydrolysis in microtubule assembly is discussed.