Perfusion chambers for high-resolution video light microscopic studies of vertebrate cell monolayers: some considerations and a design

Microsurgery and microinjection techniques in mitosis research

The use of microtechnique for studying cell division is well established (Begg & Ellis, 1979; Wadsworth, 1999; Zhang & Nicklas, 1999). The advantage of microinjection in cell division research is the timed delivery of a macromolecules at a particular stage of mitosis (for example, pre- vs postanaphase), which can circumvent the spindle assembly checkpoint (Hinchcliffe et al., 2016). Micromanipulation can be used to remove whole organelles, such as the centrosome or nucleus and examine the effects on cell division (Hinchcliffe et al., 2001; Hornick et al., 2011). The focus of this chapter is on methods for microinjection and micromanipulation of cultured mammalian cells. We describe pulling and shaping microneedles, as well as the imaging chambers we use. We also provide information on cell culture conditions, and imaging techniques used for our long-term observation studies, which allow cells to be followed on the order of several days.

Live-cell imaging

It would be hard to argue that live-cell imaging has not changed our view of biology. The past 10 years have seen an explosion of interest in imaging cellular processes, down to the molecular level. There are now many advanced techniques being applied to live cell imaging. However, cellular health is often under appreciated. For many researchers, if the cell at the end of the experiment has not gone into apoptosis or is blebbed beyond recognition, than all is well. This is simply incorrect. There are many factors that need to be considered when performing live-cell imaging in order to maintain cellular health such as: imaging modality, media, temperature, humidity, PH, osmolality, and photon dose. The wavelength of illuminating light, and the total photon dose that the cells are exposed to, comprise two of the most important and controllable parameters of live-cell imaging. The lowest photon dose that achieves a measureable metric for the experimental question should be used, not the dose that produces cover photo quality images. This is paramount to ensure that the cellular processes being investigated are in their in vitro state and not shifted to an alternate pathway due to environmental stress. The timing of the mitosis is an ideal canary in the gold mine, in that any stress induced from the imaging will result in the increased length of mitosis, thus providing a control model for the current imagining conditions.

Live-cell fluorescence imaging

This chapter examines the ways to optimize the signal-to-noise ratio while keeping the specimen healthy. Live cells expressing fluorescent protein fusions are usually dim compared to fixed specimens, both because the fluorescent proteins are not very bright and because there is, in most cases, only one fluorophores per protein. It is also favorable to choose cells that are expressing low levels of fluorescent protein fusions to minimize the difference from the levels of the endogenous protein in vivo. Long camera exposure times, which allow accumulation of weak signals, must be often avoided to reduce photobleaching and phototoxicity and to acquire images quickly enough to capture cell dynamics. Choices, such as objective lens and camera, determine the signal-to-noise ratio of an imaging system. Optimizing the imaging system to maximize signal and minimize noise is critical for live-cell fluorescence imaging. Imaging with high signal-to-noise ratio will allow detection of low concentrations of fluorescent fusion proteins with illumination conditions that are less likely to damage cells. Automation of an imaging system allows collection of multidimensional data while helping to maintain focus and minimize specimen exposure to light. Under all imaging conditions, maintaining and verifying cell health is essential to the validity of the experimental results.

Using cultured mammalian cells to study mitosis

Diverse cell types have been used to study various aspects of mitosis. Early investigators focused primarily on cells that were suited to morphological studies. More recently, experimental systems have been developed to study both morphology and the molecular basis of chromosome motion and cell-cycle regulation. This article briefly reviews cell types that have been used to study mitosis in live cells. It then discusses cell lines that have been used to examine mitosis in cultured mammalian cells and summarizes the methods that are used to culture and study these cells.

A microfluidic positioning chamber for long-term live-cell imaging

We report a microfluidic positioning chamber (MPC) that can rapidly and repeatedly relocate the same imaging area on a microscope stage. The "roof" of the microfluidic chamber was printed with serials of coordinate numbers that act as positioning marks for mammalian cells that grow attached to the "floor" of the microfluidic chamber. MPC cell culture chamber provided a simple solution for tracking the same cell or groups of cells over days or weeks. The positioning marks were used to register time-lapse images of the same imaging area to single-pixel accuracy. Using MPC cell culture chamber, we tracked the migration, division, and differentiation of individual PC12 cells for over a week using bright field and fluorescence imaging.

In vivo imaging of mammalian cells: cell engineering and viability

There are a number of instances in which the use of live cell imaging has provided critical insight into cellular and tissue function. It has therefore become a requisite analytical tool for use in cell biology, neurobiology, and developmental biology, as well as a routine method practiced in many biomedical research laboratories. The technical requirements for performing live cell imaging include a capacity to engineer appropriate cells for the imaging experiment and access to a digital image acquisition system. The availability of fluorescent protein (FP) technology allows the molecular specificity of fluorescent markers to be used in a genetically encoded manner. In this article, we describe techniques for the generation and maintenance of fluorescently labeled cells and their use in live cell imaging experiments.

An observation chamber for studying temperature-dependent and drug-induced events in live neurons using fluorescence microscopy

Live-cell imaging chambers are used in a wide range of cell biology research. Recently, chambers capable of taking high-resolution and time-lapse images of live cells have been developed and become commercially available. However, because most of these chambers are designed to maintain a thermally stable environment for the cells under study, it is usually very difficult to use them to study temperature-dependent cellular events. Here we report the development of a chamber that is able to be used for the continuous monitoring of live neurons under most commercially available upright epifluorescence and confocal microscopes and in which the temperature and composition of the medium surrounding the neurons can be changed rapidly and reversibly. This live-cell observation chamber has been used successfully with cultured rat hippocampal neurons to study temperature-dependent changes in the dynamics of the microtubule cytoskeleton using fluorescence recovery after photobleaching (FRAP) together with the localization of alpha-tubulin in the dendritic spines. The success of these observations demonstrates the usefulness and applicability of the live-cell observation chamber described here to a wide range of cell biology experiments.

Arp2 depletion inhibits sheet-like protrusions but not linear protrusions of fibroblasts and lymphocytes

The Arp2/3 complex-mediated assembly and protrusion of a branched actin network at the leading edge occurs during cell migration, although some studies suggest it is not essential. In order to test the role of Arp2/3 complex in leading edge protrusion, Swiss 3T3 fibroblasts and Jurkat T cells were depleted of Arp2 and evaluated for defects in cell morphology and spreading efficiency. Arp2-depleted fibroblasts exhibit severe defects in formation of sheet-like protrusions at early time points of cell spreading, with sheet-like protrusions limited to regions along the length of linear protrusions. However, Arp2-depleted cells are able to spread fully after extended times. Similarly, Arp2-depleted Jurkat T lymphocytes exhibit defects in spreading on anti-CD3. Interphase Jurkats in suspension are covered with large ruffle structures, whereas mitotic Jurkats are covered by finger-like linear protrusions. Arp2-depleted Jurkats exhibit defects in ruffle assembly but not in assembly of mitotic linear protrusions. Similarly, Arp2-depletion has no effect on the highly dynamic linear protrusion of another suspended lymphocyte line. We conclude that Arp2/3 complex plays a significant role in assembly of sheet-like protrusions, especially during early stages of cell spreading, but is not required for assembly of a variety of linear actin-based protrusions.

Design and construction of a new temperature-controlled chamber for light and confocal microscopy under monitored conditions: biological application for plant samples

A new light microscope-temperature-controlled chamber (LM-TCC) has been constructed. The special feature of the light microscope-temperature-controlled chamber is the Peltier-element temperature control of a specimen holder for biological samples, with a volume capacity of 1 mL. This system has marked advantages when compared to other approaches for temperature-controlled microscopy. It works in a temperature range of -10 degrees C to +95 degrees C with an accuracy of +/-0.1 degrees C in the stationary phase. The light microscope-temperature-controlled chamber allows rapid temperature shift rates. A maximum heating rate of 12.9 degrees C min(-1) and a maximum cooling rate of 6.0 degrees C min(-1) are achieved with minimized overshoots (<or=1.9 degrees C). This machinery operates at low cost and external coolants are not required. Especially with samples absorbing irradiation strongly, temperature control during microscopy is necessary to avoid overheating of samples. For example, leaf segments of Ficaria verna exposed to 4500 micromol photons m(-2) s(-1) in a standard microscopic preparation show a temperature increase (deltaT) of 18.0 degrees C, whereas in the light microscope-temperature-controlled chamber this is reduced to 4 degrees C. The kinetics of microscope-light induced deltaT are described and infrared thermography demonstrates the dissipation of the temperature. Chloroplasts of the cold adapted plant Ranunculus glacialis show the tendency to form stroma-filled protrusions in relation to the exposure temperature. The relative number of chloroplasts with protrusions is reduced at 5 degrees C when compared to 25 degrees C. This effect is reversible. The new light microscope-temperature-controlled chamber will be useful in a wide range of biological applications where a rapid change of temperature during microscopic observations is necessary or has to be avoided allowing a simulation of ecologically relevant temperature scenarios.

Imaging the division process in living tissue culture cells

We detail some of the pitfalls encountered when following live cultured somatic cells by light microscopy during mitosis. Principle difficulties in this methodology arise from the necessity to compromise between maintaining the health of the cell while achieving the appropriate temporal and spatial resolutions required for the study. Although the quality of the data collected from fixed cells is restricted only by the quality of the imaging system and the optical properties of the specimen, the major limiting factor when viewing live cells is radiation damage induced during illumination. We discuss practical considerations for minimizing this damage, and for maintaining the general health of the cell, while it is being followed by multi-mode or multi-dimensional light microscopy.

Mini chamber system for long-term maintenance and observation of cultured cells

We constructed a mini chamber system that was able to maintain cell culture on a microscope for long periods. It is a modified closed system with medium perfusion and CO2 circulation. The closed CO2 circulation and ample air inside the chamber distinguish it from other closed systems. Using different cell lines, the system was shown to be able to support long-term, time-lapse recording. After 229 hours of time-lapse recording, A2058 cells (a melanoma cell line) became overconfluent but still multiplied. Many CAD cells (a murine neuron-like cell line) still moved their cell bodies and kept their neurite-like processes after 28 days of recording. The entire healing process of a scratch-wounded 124 (a bladder cancer cell line) monolayer can be monitored. Such a modified closed system should find many applications in developmental biology, cell biology, and cancer biology where long-term, time-lapse recording is required or when the health of cells is important.

Multiple mechanisms regulate NuMA dynamics at spindle poles

The large coiled-coil protein NuMA plays an essential role in organizing microtubule minus ends at spindle poles in vertebrate cells. Here, we use both in vivo and in vitro methods to examine NuMA dynamics at mitotic spindle poles. Using fluorescence recovery after photobleaching, we show that an exogenously expressed green-fluorescent-protein/NuMA fusion undergoes continuous exchange between soluble and spindle-associated pools in living cells. These dynamics require cellular energy and display an average half-time for fluorescence recovery of approximately 3 minutes. To explore how NuMA dynamics at spindle poles is regulated, we exploited the association of NuMA with microtubule asters formed in mammalian mitotic extracts. Using a monoclonal antibody specific for human NuMA, we followed the fate of human NuMA associated with microtubule asters upon dilution with a hamster mitotic extract. Consistent with in vivo data, this assay shows that NuMA can be displaced from the core of pre-assembled asters into the soluble pool. The half-time of NuMA displacement from asters under these conditions is approximately 5 minutes. Using this assay, we show that protein kinase activity and the NuMA-binding protein LGN regulate the dynamic exchange of NuMA on microtubule asters. Thus, the dynamic properties of NuMA are regulated by multiple mechanisms including protein phosphorylation and binding to the LGN protein, and the rate of exchange between soluble and microtubule-associated pools suggests that NuMA associates with an insoluble matrix at spindle poles.

Flattening Drosophila cells for high-resolution light microscopic studies of mitosis in vitro

Here we briefly review techniques used to flatten cells that otherwise round in culture, so that their division can be more clearly analyzed in vitro by high resolution light microscopy. We then describe an agar overlay procedure for use with isolated Drosophila neuroblasts, which promotes their long-term viability while also allowing for correlative studies of the same cell in the living and fixed state. This same procedure can also be used to obtain high temporal and spatial resolution images of mitosis and cytokinesis in cultured Drosophila Schneider S2 cells, which are a popular model for RNAi studies.

Minus-end capture of preformed kinetochore fibers contributes to spindle morphogenesis

Near-simultaneous three-dimensional fluorescence/differential interference contrast microscopy was used to follow the behavior of microtubules and chromosomes in living alpha-tubulin/GFP-expressing cells after inhibition of the mitotic kinesin Eg5 with monastrol. Kinetochore fibers (K-fibers) were frequently observed forming in association with chromosomes both during monastrol treatment and after monastrol removal. Surprisingly, these K-fibers were oriented away from, and not directly connected to, centrosomes and incorporated into the spindle by the sliding of their distal ends toward centrosomes via a NuMA-dependent mechanism. Similar preformed K-fibers were also observed during spindle formation in untreated cells. In addition, upon monastrol removal, centrosomes established a transient chromosome-free bipolar array whose orientation specified the axis along which chromosomes segregated. We propose that the capture and incorporation of preformed K-fibers complements the microtubule plus-end capture mechanism and contributes to spindle formation in vertebrates.

Live cell imaging using wide-field microscopy and deconvolution

The use of fluorescence imaging methods, most recently based on fluorescent protein technology, and the availability of high quality fluorescence imaging systems have driven a revolution in cell and molecular biology. Live cell imaging, especially using fluorescence, is now used in a wide variety of assays in academic and commercial laboratories. The use of this technology requires particular attention to be paid to cell engineering, the design of the image acquisition system, the imaging protocol, and subsequent processing and analytic methods. In this review, we discuss each of these steps, highlighting practical techniques developed by us and others.

De novo formation of centrosomes in vertebrate cells arrested during S phase

The centrosome usually replicates in a semiconservative fashion, i.e., new centrioles form in association with preexisting "maternal" centrioles. De novo formation of centrioles has been reported for a few highly specialized cell types but it has not been seen in vertebrate somatic cells. We find that when centrosomes are completely destroyed by laser microsurgery in CHO cells arrested in S phase by hydroxyurea, new centrosomes form by de novo assembly. Formation of new centrosomes occurs in two steps: approximately 5-8 h after ablation, clouds of pericentriolar material (PCM) containing gamma-tubulin and pericentrin appear in the cell. By 24 h, centrioles have formed inside of already well-developed PCM clouds. This de novo pathway leads to the formation of a random number of centrioles (2-14 per cell). Although clouds of PCM consistently form even when microtubules are completely disassembled by nocodazole, the centrioles are not assembled under these conditions.

Mitosis in primary cultures ofDrosophila melanogasterlarval neuroblasts

Although Drosophila larval neuroblasts are routinely used to define mutations affecting mitosis, the dynamics of karyokinesis in this system remain to be described. Here we outline a simple method for the short-term culturing of neuroblasts, from Drosophila third instar larvae, that allows mitosis to be followed by high-resolution multi-mode light microscopy. At 24°C, spindle formation takes 7±0.5 minutes. Analysis of neuroblasts containing various GFP-tagged proteins (e.g. histone,fizzy, fizzy-related and α-tubulin) reveals that attaching kinetochores exhibit sudden, rapid pole-directed motions and that congressing and metaphase chromosomes do not undergo oscillations. By metaphase, the arms of longer chromosomes can be resolved as two chromatids, and they often extend towards a pole. Anaphase A and B occur concurrently, and during anaphase A chromatids move poleward at 3.2±0.1 μm/minute, whereas during anaphase B the spindle poles separate at 1.6±01 μm/minute. In larger neuroblasts,the spindle undergoes a sudden shift in position during midanaphase, after which the centrally located centrosome preferentially generates a robust aster and stops moving, even while the spindle continues to elongate. Together these two processes contribute to an asymmetric positioning of the spindle midzone,which, in turn, results in an asymmetric cytokinesis. Bipolar spindles form predominately (83%) in association with the separating centrosomes. However,in 17% of the cells, secondary spindles form around chromosomes without respect to centrosome position: in most cases these spindles coalesce with the primary spindle by anaphase, but in a few they remain separate and define additional ectopic poles.

Separating centrosomes interact in the absence of associated chromosomes during mitosis in cultured vertebrate cells

We detail here how "free" centrosomes, lacking associated chromosomes, behave during mitosis in PtK(2) homokaryons stably expressing GFP-alpha-tubulin. As free centrosomes separate during prometaphase, their associated astral microtubules (Mts) interact to form a spindle-shaped array that is enriched for cytoplasmic dynein and Eg5. Over the next 30 min, these arrays become progressively depleted of Mts until the two centrosomes are linked by a single bundle, containing 10-20 Mts, that persists for > 60 min. The overlapping astral Mts within this bundle are loosely organized, and their plus ends terminate near its midzone, which is enriched for an ill-defined matrix material. At this time, the distance between the centrosomes is not defined by external forces because these organelles remain stationary when the bundle connecting them is severed by laser microsurgery. However, since the centrosomes move towards one another in response to monastrol treatment, the kinesin-like motor protein Eg5 is involved. From these results, we conclude that separating asters interact during prometaphase of mitosis to form a spindle-shaped Mt array, but that in the absence of chromosomes this array is unstable. An analysis of the existing data suggests that the stabilization of spindle Mts during mitosis in vertebrates does not involve the chromatin (i.e., the RCC1/RanGTP pathway), but instead some other chromosomal component, e.g., kinetochores.

Immunofluorescence microchamber technique for characterizing isolated organelles

We describe a rapid technique for the localization and quantitation of specific proteins on organelles bound to microscope chambers. Disposable chambers are constructed from glass slides and provide a platform for the binding of organelles and subsequent immunofluorescence and biochemical assays. Several studies are presented to demonstrate the utility of this technique. Kinesin was visualized in postnuclear supernatants. Golgi and endoplasmic reticulum bound quantitatively to chambers. Endocytic vesicles prepared from rat liver that had been injected in situ with Texas red-labeled asialoorsomucoid allowed for simultaneous detection of asialoorosomucoid, asialoglycoprotein receptor, caveolin 1, and microtubules. Asialoglycoprotein receptor colocalized with asialoorosomucoid-containing vesicles, whereas many of the caveolin 1 structures had no asialoorosomucoid or asialoglycoprotein receptor. The microchambers were also used to measure the binding to endocytic vesicles of exogenously added Rab5 and to monitor the ATP-dependent acidification of endocytic vesicles using the fluorescent dye acridine orange.

Centrosomes enhance the fidelity of cytokinesis in vertebrates and are required for cell cycle progression

When centrosomes are destroyed during prophase by laser microsurgery, vertebrate somatic cells form bipolar acentrosomal mitotic spindles (Khodjakov, A., R.W. Cole, B.R. Oakley, and C.L. Rieder. 2000. Curr. Biol. 10:59-67), but the fate of these cells is unknown. Here, we show that, although these cells lack the radial arrays of astral microtubules normally associated with each spindle pole, they undergo a normal anaphase and usually produce two acentrosomal daughter cells. Relative to controls, however, these cells exhibit a significantly higher (30-50%) failure rate in cytokinesis. This failure correlates with the inability of the spindle to properly reposition itself as the cell changes shape. Also, we destroyed just one centrosome during metaphase and followed the fate of the resultant acentrosomal and centrosomal daughter cells. Within 72 h, 100% of the centrosome-containing cells had either entered DNA synthesis or divided. By contrast, during this period, none of the acentrosomal cells had entered S phase. These data reveal that the primary role of the centrosome in somatic cells is not to form the spindle but instead to ensure cytokinesis and subsequent cell cycle progression.

The sudden recruitment of gamma-tubulin to the centrosome at the onset of mitosis and its dynamic exchange throughout the cell cycle, do not require microtubules

gamma-Tubulin is a centrosomal component involved in microtubule nucleation. To determine how this molecule behaves during the cell cycle, we have established several vertebrate somatic cell lines that constitutively express a gamma-tubulin/green fluorescent protein fusion protein. Near simultaneous fluorescence and DIC light microscopy reveals that the amount of gamma-tubulin associated with the centrosome remains relatively constant throughout interphase, suddenly increases during prophase, and then decreases to interphase levels as the cell exits mitosis. This mitosis-specific recruitment of gamma-tubulin does not require microtubules. Fluorescence recovery after photobleaching (FRAP) studies reveal that the centrosome possesses two populations of gamma-tubulin: one that turns over rapidly and another that is more tightly bound. The dynamic exchange of centrosome-associated gamma-tubulin occurs throughout the cell cycle, including mitosis, and it does not require microtubules. These data are the first to characterize the dynamics of centrosome-associated gamma-tubulin in vertebrate cells in vivo and to demonstrate the microtubule-independent nature of these dynamics. They reveal that the additional gamma-tubulin required for spindle formation does not accumulate progressively at the centrosome during interphase. Rather, at the onset of mitosis, the centrosome suddenly gains the ability to bind greater than three times the amount of gamma-tubulin than during interphase.

Cleavage furrows formed between centrosomes lacking an intervening spindle and chromosomes contain microtubule bundles, INCENP, and CHO1 but not CENP-E

PtK1 cells containing two independent mitotic spindles can cleave between neighboring centrosomes, in the absence of an intervening spindle, as well as at the spindle equators. We used same-cell video, immunofluorescence, and electron microscopy to compare the structure and composition of normal equatorial furrows with that of ectopic furrows formed between spindles. As in controls, ectopic furrows contained midbodies composed of microtubule bundles and an electron-opaque matrix. Despite the absence of an intervening spindle and chromosomes, the midbodies associated with ectopic furrows also contained the microtubule-bundling protein CHO1 and the chromosomal passenger protein INCENP. However, CENP-E, another passenger protein, was not found in ectopic furrows but was always present in controls. We also examined cells in which the ectopic furrow initiated but relaxed. Although relaxing furrows contained overlapping microtubules from opposing centrosomes, they lacked microtubule bundles as well as INCENP and CHO1. Together these data suggest that the mechanism defining the site of furrow formation during mitosis in vertebrates does not depend on the presence of underlying microtubule bundles and chromosomes or on the stable association of INCENP or CHO1. The data also suggest that the completion of cytokinesis requires the presence of microtubule bundles and specific proteins (e.g., INCENP, CHO1, etc.) that do not include CENP-E.

Entry into mitosis in vertebrate somatic cells is guarded by a chromosome damage checkpoint that reverses the cell cycle when triggered during early but not late prophase

When vertebrate somatic cells are selectively irradiated in the nucleus during late prophase (<30 min before nuclear envelope breakdown) they progress normally through mitosis even if they contain broken chromosomes. However, if early prophase nuclei are similarly irradiated, chromosome condensation is reversed and the cells return to interphase. Thus, the G2 checkpoint that prevents entry into mitosis in response to nuclear damage ceases to function in late prophase. If one nucleus in a cell containing two early prophase nuclei is selectively irradiated, both return to interphase, and prophase cells that have been induced to returned to interphase retain a normal cytoplasmic microtubule complex. Thus, damage to an early prophase nucleus is converted into a signal that not only reverses the nuclear events of prophase, but this signal also enters the cytoplasm where it inhibits e.g., centrosome maturation and the formation of asters. Immunofluorescent analyses reveal that the irradiation-induced reversion of prophase is correlated with the dephosphorylation of histone H1, histone H3, and the MPM2 epitopes. Together, these data reveal that a checkpoint control exists in early but not late prophase in vertebrate cells that, when triggered, reverses the cell cycle by apparently downregulating existing cyclin-dependent kinase (CDK1) activity.

Kinetochore fiber maturation in PtK1 cells and its implications for the mechanisms of chromosome congression and anaphase onset

Kinetochore microtubules (kMts) are a subset of spindle microtubules that bind directly to the kinetochore to form the kinetochore fiber (K-fiber). The K-fiber in turn interacts with the kinetochore to produce chromosome motion toward the attached spindle pole. We have examined K-fiber maturation in PtK1 cells using same-cell video light microscopy/serial section EM. During congression, the kinetochore moving away from its spindle pole (i.e., the trailing kinetochore) and its leading, poleward moving sister both have variable numbers of kMts, but the trailing kinetochore always has at least twice as many kMts as the leading kinetochore. A comparison of Mt numbers on sister kinetochores of congressing chromosomes with their direction of motion, as well as distance from their associated spindle poles, reveals that the direction of motion is not determined by kMt number or total kMt length. The same result was observed for oscillating metaphase chromosomes. These data demonstrate that the tendency of a kinetochore to move poleward is not positively correlated with the kMt number. At late prometaphase, the average number of Mts on fully congressed kinetochores is 19.7 +/- 6.7 (n = 94), at late metaphase 24.3 +/- 4.9 (n = 62), and at early anaphase 27.8 +/- 6.3 (n = 65). Differences between these distributions are statistically significant. The increased kMt number during early anaphase, relative to late metaphase, reflects the increased kMt stability at anaphase onset. Treatment of late metaphase cells with 1 microM taxol inhibits anaphase onset, but produces the same kMt distribution as in early anaphase: 28.7 +/- 7. 4 (n = 54). Thus, a full complement of kMts is not sufficient to induce anaphase onset. We also measured the time course for kMt acquisition and determined an initial rate of 1.9 kMts/min. This rate accelerates up to 10-fold during the course of K-fiber maturation, suggesting an increased concentration of Mt plus ends in the vicinity of the kinetochore at late metaphase and/or cooperativity for kMt acquisition.