Stem-cell-based, tissue engineered tracheal replacement in a child: a 2-year follow-up study

The Development of Lung Tissue Engineering: From Biomaterials to Multicellular Systems

The challenge of the treatment of end-stage lung disease poses an urgent clinical demand for lung tissue engineering. Over the past few years, various lung tissue-engineered constructs are developed for lung tissue regeneration and respiratory pathology study. In this review, an overview of recent achievements in the field of lung tissue engineering is proposed. The introduction of lung structure and lung injury are stated briefly at first. After that, the lung tissue-engineered constructs are categorized into three types: acellular, monocellular, and multicellular systems. The different bioengineered constructs included in each system that can be applied to the reconstruction of the trachea, airway epithelium, alveoli, and even whole lung are described in detail, followed by the highlight of relevant representative research. Finally, the challenges and future directions of biomaterials, manufacturing technologies, and cells involved in lung tissue engineering are discussed. Overall, this review can provide referable ideas for the realization of functional lung regeneration and permanent lung substitution.

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

Full circumferential human tracheal replacement: a systematic review

Full Circumferential Tracheal Replacement (FCTR) is a surgical challenge, indicated in rare cases of extensive tracheal resection, with no consensus on surgical technique or materials. A systematic review according to PRISMA guidelines was carried out from 2000 to 2022 to identify cases of FCTR, to compare surgical indications, the nature of the tracheal substitutes and their immunological characteristics, surgical replacement techniques and vascularization. Thirty-seven patients, including five children, underwent FCTR surgery using 4 different techniques: thyrotracheal complex allograft (n = 2), aorta (n = 12), autologous surgical reconstruction (n = 19), tissue-engineered decellularized trachea (n = 4). The mean follow-up was 4 years. Of the 15 deceased patients, 10 died of the progression of the initial pathology. For the majority of the teams, particular care was given to the vascularization of the substitute, in order to guarantee long-term biointegration. This included either direct vascularization via vascular anastomosis, or an indirect technique involving envelopment of the avascular substitute in a richly vascularized tissue. Stent placement was standard, except for autologous surgical reconstructions where tracheal caliber was stable. Internal stents were frequently complicated by granulation and stenosis. Although epithelial coverage is essential to limit endoluminal proliferation and act as a barrier, fully functional ciliated airway epithelium did not seem to be necessary. In order to facilitate future comparisons, a standardized clinical trial, respecting regulatory constraints, including routine follow-up with tracheal biomechanics assessment and scheduled biopsies could be proposed. It would help collecting information such as dynamics and mechanisms of tracheal bio-integration and regeneration.

A Contemporary Review of Trachea, Nose, and Ear Cartilage Bioengineering and Additive Manufacturing

The complex structure, chemical composition, and biomechanical properties of craniofacial cartilaginous structures make them challenging to reconstruct. Autologous grafts have limited tissue availability and can cause significant donor-site morbidity, homologous grafts often require immunosuppression, and alloplastic grafts may have high rates of infection or displacement. Furthermore, all these grafting techniques require a high level of surgical skill to ensure that the reconstruction matches the original structure. Current research indicates that additive manufacturing shows promise in overcoming these limitations. Autologous stem cells have been developed into cartilage when exposed to the appropriate growth factors and culture conditions, such as mechanical stress and oxygen deprivation. Additive manufacturing allows for increased precision when engineering scaffolds for stem cell cultures. Fine control over the porosity and structure of a material ensures adequate cell adhesion and fit between the graft and the defect. Several recent tissue engineering studies have focused on the trachea, nose, and ear, as these structures are often damaged by congenital conditions, trauma, and malignancy. This article reviews the limitations of current reconstructive techniques and the new developments in additive manufacturing for tracheal, nasal, and auricular cartilages.

Preparation of Decellularized Tissue as Dual Cell Carrier Systems: A Step Towards Facilitating Re-epithelization and Cell Encapsulation for Tracheal Reconstruction

Surgical treatment of tracheal diseases, trauma, and congenital stenosis has shown success through tracheal reconstruction coupled with palliative care. However, challenges in surgical-based tracheal repairs have prompted the exploration of alternative approaches for tracheal replacement. Tissue-based treatments, involving the cultivation of patient cells on a network of extracellular matrix (ECM) from donor tissue, hold promise for restoring tracheal structure and function without eliciting an immune reaction. In this study, we utilized decellularized canine tracheas as tissue models to develop two types of cell carriers: a decellularized scaffold and a hydrogel. Our hypothesis posits that both carriers, containing essential biochemical niches provided by ECM components, facilitate cell attachment without inducing cytotoxicity. Canine tracheas underwent vacuum-assisted decellularization (VAD), and the ECM-rich hydrogel was prepared through peptic digestion of the decellularized trachea. The decellularized canine trachea exhibited a significant reduction in DNA content and major histocompatibility complex class II, while preserving crucial ECM components such as collagen, glycosaminoglycan, laminin, and fibronectin. Scanning electron microscope and fluorescent microscope images revealed a fibrous ECM network on the luminal side of the cell-free trachea, supporting epithelial cell attachment. Moreover, the ECM-rich hydrogel exhibited excellent viability for human mesenchymal stem cells encapsulated for 3 days, indicating the potential of cell-laden hydrogel in promoting the development of cartilage rings of the trachea. This study underscores the versatility of the trachea in producing two distinct cell carriers-decellularized scaffold and hydrogel-both containing the native biochemical niche essential for tracheal tissue engineering applications.

De-Epithelialized Viable Tracheal Allotransplantation Without Immunosuppressants: 5-Year Follow-Up

OBJECTIVE

Tracheal transplantation could be a better option for patients with long segmental laryngotracheal stenosis or defects, but the need for immunosuppressants limits its widespread use due to the antigenicity of the tracheal epithelium. Chemically treated or cryopreserved nonviable tracheal allografts have no immunogenicity but lead to necrosis and stenosis in long-term outcomes. The present report describes the 5-year outcomes of de-epithelialized viable tracheal allotransplantation without immunosuppressants in a patient with severe laryngotracheal stenosis.

METHODS

The recipient was a 47-year-old female with relapsing polychondritis affecting the larynx and cervical trachea and producing a 5 cm long stenosis that could not be repaired using resection and anastomosis. A tracheal allograft was obtained from a 45-year-old male donor and treated with a combination of 3% sodium dodecyl sulfate (SDS) and organ preservation solution for 138 hours. The allograft was revascularized by heterotopical implantation in the infrahyoid muscles of the recipient for 3 months and then transplantation to the laryngotracheal defect with a split-thickness skin graft sutured to the lumen and a silicon T-tube. No immunosuppressants were used postoperatively.

RESULTS

The allograft was de-epithelialized, and most of the cartilage rings remained viable after the treatment. The allograft was revascularized, viable, and mechanically stable after 3 months of heterotopic implantation. No apparent signs of rejection or destruction were observed. The T-tube was removed, and the internal lining of the allograft was repopulated 4 months after orthotopic transplantation, despite the skin graft necrotizing at 2 weeks. Endoscopy and computed tomography showed a patent airway 5 years after orthotopic transplantation. The patient was able to resume her usual quality of life.

CONCLUSION

The present study demonstrates that transplantation of the de-epithelialized viable tracheal allograft without immunosuppressants is safe and promising for patients with long laryngotracheal stenosis or defects, especially for those with malignant tumor resections.

Global Bibliometric and Visualized Analysis of Tracheal Tissue Engineering Research

The development of tracheal tissue engineering (TTE) has seen a rapid growth in recent years. The purpose of this study was to investigate the global status, trends, and hotspots of TTE research based on bibliometrics and visualization analysis. Publications related to TTE were retrieved and included in the Web of Science Core Collection. VOSviewer and CiteSpace were used to generate knowledge maps. Six hundred fifty-five publications were identified, and the quantity of the annual publications worldwide was on the increase. International collaboration is a widespread reality. The United States led the world in the field of trachea tissue engineering, whereas University College London was the institution with the greatest contribution. In addition, Biomaterials had a great influence in this field, attracting the largest number of papers. Moreover, the topics of TTE research largely concentrated on the biomechanical scaffold preparation, the vascularization and epithelialization of scaffold, the tracheal cartilage regeneration, and the tissue-engineered tracheal transplantation. And the research on the application of decellularization and 3D printing for the construction of a tissue-engineered trachea was likely to receive more widespread attention in the future. Impact statement In recent years, tracheal tissue engineering (TTE) has experienced rapid growth. In this study, we investigated the worldwide status and trends of TTE research, and revealed the countries, institutions, journals, and authors that had made significant contributions to the field of TTE. Moreover, the possible research hotspots in the future were predicted. According to our research, researchers can gain a better understanding of the trends in this field, and stay informed of the most current research by tracking key journals, institutions, and authors.

Tracheal Replacement Techniques and Associated Mortality: A Systematic Review

OBJECTIVE

Tracheal replacement is a crucial operation to enhance the quality of life for patients with extensive tracheal lesions. The most suitable surgical techniques for different clinical conditions remain a topic of debate. Through a reviewing of the relevant literature, this study investigated the association between surgical techniques and mortality rate.

DATA SOURCES

Studies were collected from PubMed, Embase, the Web of Science, the Cochrane Center Register of Controlled Trials, and ClinicalTrials.gov.

METHODS

This systematic review encompassed literature from the inception of each database to May 10, 2023, focusing on tracheal replacement for patients who underwent circumferential resection of the trachea or partial resection with preservation of the posterior membranous wall. Non-human and non-clinical studies were excluded.

RESULTS

About 31 studies were included in the assessment comprising a combination of case reports and case series, and 118 patients underwent tracheal replacement through four underlying methodologies, including tracheal allotransplantation, autologous tissue reconstruction, bioprosthetic reconstruction, or tissue engineering surgery. Each modality exhibits unique advantages and disadvantages, leading to variable outcomes in clinical application.

CONCLUSION

Tracheal replacement is challenging due to the absence of an ideal substitution or graft material. Despite limited clinical successes observed across various modalities, we believe autologous tissue reconstruction for tracheal replacement has the advantage of broadest indications, low rejection rate, and avoidance of immunosuppressive agents. Future research should focus on achieving tracheal replacement that preserves mucociliary clearance, lateral rigidity, and longitudinal flexibility.

LEVEL OF EVIDENCE

NA Laryngoscope, 134:1517-1522, 2024.

Assessing the Biocompatibility and Regeneration of Electrospun-Nanofiber Composite Tracheal Grafts

OBJECTIVE

Composite tracheal grafts (CTG) combining decellularized scaffolds with external biomaterial support have been shown to support host-derived neotissue formation. In this study, we examine the biocompatibility, graft epithelialization, vascularization, and patency of three prototype CTG using a mouse microsurgical model.

STUDY DESIGN

Tracheal replacement, regenerative medicine, biocompatible airway splints, animal model.

METHOD

CTG electrospun splints made by combining partially decellularized tracheal grafts (PDTG) with polyglycolic acid (PGA), poly(lactide-co-ε-caprolactone) (PLCL), or PLCL/PGA were orthotopically implanted in mice (N = 10/group). Tracheas were explanted two weeks post-implantation. Micro-Computed Tomography was conducted to assess for graft patency, and histological analysis was used to assess for epithelialization and neovascularization.

RESULT

Most animals (greater than 80%) survived until the planned endpoint and did not exhibit respiratory symptoms. MicroCT confirmed the preservation of graft patency. Grossly, the PDTG component of CTG remained intact. Examining the electrospun component of CTG, PGA degraded significantly, while PLCL+PDTG and PLCL/PGA + PDTG maintained their structure. Microvasculature was observed across the surface of CTG and infiltrating the pores. There were no signs of excessive cellular infiltration or encapsulation. Graft microvasculature and epithelium appear similar in all groups, suggesting that CTG did not hinder endothelialization and epithelialization.

CONCLUSION

We found that all electrospun nanofiber CTGs are biocompatible and did not affect graft patency, endothelialization and epithelialization. Future directions will explore methods to accelerate graft regeneration of CTG.

LEVEL OF EVIDENCE

N/A Laryngoscope, 134:1155-1162, 2024.

Extended autologous tracheal replacement by a novel pedicled thoraco-chondro-costal flap: a cadaveric proof of concept

OBJECTIVES

Our aim was to report an anatomic model of an autologous flap based on the internal thoracic blood supply: the pedicled thoraco-chondro-costal flap; and establish the feasibility of various types of extended tracheal replacement with this novel flap, according to a newly proposed topographic classification.

METHODS

In a cadaveric model, a cervicotomy combined with median sternotomy was performed. The incision was extended laterally to expose the chest wall. The internal thoracic pedicle was freed from its origin down to the upper limit of the delineated flap to be elevated. The perichondria and adjacent periostea were incised longitudinally to remove cartilages and adjacent rib segments, preserving perichondria and periostea. A full-thickness quadrangular chest wall flap pedicled on internal thoracic vessels was then elevated and shaped into a neo conduit to replace the trachea with the pleura as an inner lining.

RESULTS

Various types of extended non-circumferential and full-circumferential tracheal replacements were achieved with this composite flap. No anastomosis tension was noticed despite the absence of release manoeuvres.

CONCLUSIONS

This model could represent a suitable autologous tracheal substitute, which is long, longitudinally flexible and eventually transversely rigid. No microsurgical vascular anastomoses are required. The technique is reproducible. The perichondria and periostea would regenerate vascularized neo-cartilaginous rings, potentially decreasing the need for long-term stenting. The inner pleural lining could potentially transform into ciliated epithelium as shown in previous preclinical studies.

Tracheal Tissue Engineering: Principles and State of the Art

Patients affected by long-segment tracheal defects or stenoses represent an unsolved surgical issue, since they cannot be treated with the conventional surgery of tracheal resection and consequent anastomosis. Hence, different strategies for tracheal replacement have been proposed (synthetic materials, aortic allografts, transplantation, autologous tissue composites, and tissue engineering), each with advantages and drawbacks. Tracheal tissue engineering, on the other hand, aims at recreating a fully functional tracheal substitute, without the need for the patient to receive lifelong immunosuppression or endotracheal stents. Tissue engineering approaches involve the use of a scaffold, stem cells, and humoral signals. This paper reviews the main aspects of tracheal TE, starting from the choice of the scaffold to the type of stem cells that can be used to seed the scaffold, the methods for their culture and expansion, the issue of graft revascularization at the moment of in vivo implantation, and experimental models of tracheal research. Moreover, a critical insight on the state of the art of tracheal tissue engineering is also presented.

I Walk the Line: Between Basic Science and Paediatric Surgery

The role of a basic scientist working with paediatric surgeons is not an obvious one. However, there are several levels at which science can contribute to the speciality, and also ways that scientists can learn useful lessons from paediatric surgery. As most conditions treated by paediatric surgeons have low case numbers, we need to find ways of defining optimal treatment and developing novel therapies within a challenging number of patients.

Synergistic Effects of SDS and H2O2 Combinations on Tracheal Scaffold Development: An In Vitro Study Using Goat Trachea

Currently, a tissue-engineered trachea has been popularly used as a biological graft for tracheal replacement in severe respiratory diseases. In the development of tissue-engineered tracheal scaffolds, in vitro studies play a crucial role in allowing researchers to evaluate the efficacy and safety of scaffold designs and fabrication techniques before progressing to in vivo or clinical trials. This research involved the decellularization of goat trachea using SDS, H2O2, and their combinations. Various quantitative and qualitative assessments were performed, including histological analysis, immunohistochemistry, and biomechanical testing. Hematoxylin and eosin staining evaluated the cellular content, while safranin O-fast green and Masson's trichrome staining assessed glycosaminoglycan content and collagen distribution, respectively. The immunohistochemical analysis focused on detecting MHC-1 antigen presence. Tensile strength measurements were conducted to evaluate the biomechanical properties of the decellularized scaffolds. The results demonstrated that the combination of SDS and H2O2 for goat tracheal decellularization yielded scaffolds with minimal cellular remnants, low toxicity, preserved ECM, and high tensile strength and elasticity. This method holds promise for developing functional tracheal scaffolds to address severe respiratory diseases effectively.

An engineered lymph node comprising porous collagen scaffold with hybridized biological signals embedded in B cell membrane coatings

Complications can arise from damaging or removing lymph nodes after surgeries for malignant tumours. Our team has developed an innovative solution to recreate lymph nodes via an engineering approach. Using a Type II collagen scaffold coated with B cell membranes for the sake of attracting T cells in different regions, we could mimic the thymus-dependent and thymus-independent areas in vitro. This engineering strategy based on biophysical mimicry has a great potential for clinical applications. By further conjugating biological signals, anti-CD3/28, onto the scaffold coated with the B cell membrane, we achieved an 11.6-fold expansion of T cells within 14 days of in vitro culture while ensuring their activity, phenotype homeostasis, and differentiation capacity kept intact. Artificial lymph nodes had excellent biocompatibility and caused no pathological or physiological adverse effects after implantation into C57BL6 mice. In vivo assays also demonstrated that this artificial lymph node system positively adhered to omental tissues, creating an environment that fostered T cell growth and prevented cellular failure and death. Additionally, it induced vascular and lymphatic vessel invasion, which was beneficial to the migration and circulation of T cells between this system and peripheral blood. Due to the porous collagen fibre structure, it also facilitated the infiltration of host immune cells. This work opens new avenues to immune organ regeneration via a tissue engineering approach.

Recent advances in the treatment of gastrointestinal motility disorders in children

INTRODUCTION

Pediatric gastrointestinal motility disorders represent some of the most challenging clinical conditions with largely undefined pathogenetic pathways and therefore limited therapeutic options. Herein, we provide an overview of the recent advances in treatment options for these disorders and their clinical impact.

AREAS COVERED

PubMed and Medline databases were searched for relevant articles related to the treatment of achalasia, esophageal atresia, gastroparesis, PIPO and constipation published between 2017 and 2022. In this article, we review and summarize recent advances in management of gastrointestinal motility disorders in children with a particular focus on emerging therapies as well as novel diagnostic modalities that help guide their application or develop new, more targeted treatments.

EXPERT OPINION

Gastrointestinal motility disorders represent one of the most challenging conundrums in pediatric age and despite significant advances in investigative tools, the palette of treatment options remain limited. Overall, while pharmacological options have failed to bring a curative solution, recent advances in minimal invasive therapeutic and diagnostic techniques have emerged as potential keys to symptom and quality of life improvement, such as ENDOFLIP, POEM, cine-MRI, fecal microbiota transplantation.

Tracheal replacement with aortic grafts: Bench to clinical practice

Tracheal reconstruction following extensive resection for malignant or benign lesions remains a major challenge in thoracic surgery. Numerous studies have attempted to identify the optimal tracheal replacement with different biological or prosthetic materials, such as various homologous and autologous tissues, with no encouraging outcomes. Recently, a few clinical studies reported attaining favorable outcomes using in vitro or stem cell-based airway engineering and also with tracheal allograft implantation following heterotopic revascularization. However, none of the relevant studies offered a standardized technology for airway replacement. In 1997, a novel approach to airway reconstruction was proposed, which involved using aortic grafts as the biological matrix. Studies on animal models reported achieving in-vivo cartilage and epithelial regeneration using this approach. These encouraging results inspired the subsequent application of cryopreserved aortic allografts in humans for the first time. Cryopreserved aortic allografts offered further advantages, such as easy availability in tissue banks and no requirement for immunosuppressive treatments. Currently, stented aortic matrix-based airway replacement has emerged as a standard approach, and its effectiveness was also verified in the recently reported TRITON-01 study. In this context, the present review aims to summarize the current status of the application of aortic grafts in tracheal replacement, including the latest advancements in experimental and clinical practice.

Oxygen-releasing biomaterials for regenerative medicine

Oxygen is critical to the survival, function and fate of mammalian cells. Oxygen tension controls cellular behavior through metabolic programming, which in turn controls tissue regeneration. A variety of biomaterials with oxygen-releasing capabilities have been developed to provide oxygen supply to ensure cell survival and differentiation for therapeutic efficacy, and to prevent hypoxia-induced tissue damage and cell death. However, controlling the oxygen release with spatial and temporal accuracy is still technically challenging. In this review, we provide a comprehensive overview of organic and inorganic materials available as oxygen sources, including hemoglobin-based oxygen carriers (HBOCs), perfluorocarbons (PFCs), photosynthetic organisms, solid and liquid peroxides, and some of the latest materials such as metal-organic frameworks (MOFs). Additionally, we introduce the corresponding carrier materials and the oxygen production methods and present state-of-the-art applications and breakthroughs of oxygen-releasing materials. Furthermore, we discuss the current challenges and the future perspectives in the field. After reviewing the recent progress and the future perspectives of oxygen-releasing materials, we predict that smart material systems that combine precise detection of oxygenation and adaptive control of oxygen delivery will be the future trend for oxygen-releasing materials in regenerative medicine.

Three-Dimensional Bioprinting of Naturally Derived Hydrogels for the Production of Biomimetic Living Tissues: Benefits and Challenges

Three-dimensional bioprinting is the process of manipulating cell-laden bioinks to fabricate living structures. Three-dimensional bioprinting techniques have brought considerable innovation in biomedicine, especially in the field of tissue engineering, allowing the production of 3D organ and tissue models for in vivo transplantation purposes or for in-depth and precise in vitro analyses. Naturally derived hydrogels, especially those obtained from the decellularization of biological tissues, are promising bioinks for 3D printing purposes, as they present the best biocompatibility characteristics. Despite this, many natural hydrogels do not possess the necessary mechanical properties to allow a simple and immediate application in the 3D printing process. In this review, we focus on the bioactive and mechanical characteristics that natural hydrogels may possess to allow efficient production of organs and tissues for biomedical applications, emphasizing the reinforcement techniques to improve their biomechanical properties.

Regenerative medicine: current research and perspective in pediatric surgery

The field of regenerative medicine, encompassing several disciplines including stem cell biology and tissue engineering, continues to advance with the accumulating research on cell manipulation technologies, gene therapy and new materials. Recent progress in preclinical and clinical studies may transcend the boundaries of regenerative medicine from laboratory research towards clinical reality. However, for the ultimate goal to construct bioengineered transplantable organs, a number of issues still need to be addressed. In particular, engineering of elaborate tissues and organs requires a fine combination of different relevant aspects; not only the repopulation of multiple cell phenotypes in an appropriate distribution but also the adjustment of the host environmental factors such as vascularisation, innervation and immunomodulation. The aim of this review article is to provide an overview of the recent discoveries and development in stem cells and tissue engineering, which are inseparably interconnected. The current status of research on tissue stem cells and bioengineering, and the possibilities for application in specific organs relevant to paediatric surgery have been specifically focused and outlined.

Current Status and Future Outlook of Additive Manufacturing Technologies for the Reconstruction of the Trachea

Tracheal stenosis and defects occur congenitally and in patients who have undergone tracheal intubation and tracheostomy due to long-term intensive care. Such issues may also be observed during tracheal removal during malignant head and neck tumor resection. However, to date, no treatment method has been identified that can simultaneously restore the appearance of the tracheal skeleton while maintaining respiratory function in patients with tracheal defects. Therefore, there is an urgent need to develop a method that can maintain tracheal function while simultaneously reconstructing the skeletal structure of the trachea. Under such circumstances, the advent of additive manufacturing technology that can create customized structures using patient medical image data provides new possibilities for tracheal reconstruction surgery. In this study, the three-dimensional (3D) printing and bioprinting technologies used in tracheal reconstruction are summarized, and various research results related to the reconstruction of mucous membranes, cartilage, blood vessels, and muscle tissue, which are tissues required for tracheal reconstruction, are classified. The prospects for 3D-printed tracheas in clinical studies are also described. This review serves as a guide for the development of artificial tracheas and clinical trials using 3D printing and bioprinting.

Bioengineering and Clinical Translation of Human Lung and its Components

Clinical lung transplantation has rapidly established itself as the gold standard of treatment for end-stage lung diseases in a restricted group of patients since the first successful lung transplant occurred. Although significant progress has been made in lung transplantation, there are still numerous obstacles on the path to clinical success. The development of bioartificial lung grafts using patient-derived cells may serve as an alternative treatment modality; however, challenges include developing appropriate scaffold materials, advanced culture strategies for lung-specific multiple cell populations, and fully matured constructs to ensure increased transplant lifetime following implantation. This review highlights the development of tissue-engineered tracheal and lung equivalents over the past two decades, key problems in lung transplantation in a clinical environment, the advancements made in scaffolds, bioprinting technologies, bioreactors, organoids, and organ-on-a-chip technologies. The review aims to fill the lacuna in existing literature toward a holistic bioartificial lung tissue, including trachea, capillaries, airways, bifurcating bronchioles, lung disease models, and their clinical translation. Herein, the efforts are on bridging the application of lung tissue engineering methods in a clinical environment as it is thought that tissue engineering holds enormous promise for overcoming the challenges associated with the clinical translation of bioengineered human lung and its components.

A Multimodal Approach to Quantify Chondrocyte Viability for Airway Tissue Engineering

OBJECTIVES/HYPOTHESIS

Partially decellularized tracheal scaffolds have emerged as a potential solution for long-segment tracheal defects. These grafts have exhibited regenerative capacity and the preservation of native mechanical properties resulting from the elimination of all highly immunogenic cell types while sparing weakly immunogenic cartilage. With partial decellularization, new considerations must be made about the viability of preserved chondrocytes. In this study, we propose a multimodal approach for quantifying chondrocyte viability for airway tissue engineering.

METHODS

Tracheal segments (5 mm) were harvested from C57BL/6 mice, and immediately stored in phosphate-buffered saline at -20°C (PBS-20) or biobanked via cryopreservation. Stored and control (fresh) tracheal grafts were implanted as syngeneic tracheal grafts (STG) for 3 months. STG was scanned with micro-computed tomography (μCT) in vivo. STG subjected to different conditions (fresh, PBS-20, or biobanked) were characterized with live/dead assay, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL), and von Kossa staining.

RESULTS

Live/dead assay detected higher chondrocyte viability in biobanked conditions compared to PBS-20. TUNEL staining indicated that storage conditions did not alter the proportion of apoptotic cells. Biobanking exhibited a lower calcification area than PBS-20 in 3-month post-implanted grafts. Higher radiographic density (Hounsfield units) measured by μCT correlated with more calcification within the tracheal cartilage.

CONCLUSIONS

We propose a strategy to assess chondrocyte viability that integrates with vivo imaging and histologic techniques, leveraging their respective strengths and weaknesses. These techniques will support the rational design of partially decellularized tracheal scaffolds.

LEVEL OF EVIDENCE

N/A Laryngoscope, 133:512-520, 2023.

Decellularization compromises mechanical and structural properties of the native trachea

Tracheal replacement using tissue engineering technologies offers great potential to improve previously intractable clinical interventions, and interest in this area has increased in recent years. Many engineered airway constructs currently rely on decellularized native tracheas to serve as the scaffold for tissue repair. Yet, mechanical failure leading to airway narrowing and collapse remains a major cause of morbidity and mortality following clinical implantation of decellularized tracheal grafts. To understand better the factors contributing to mechanical failure in vivo, we characterized the histo-mechanical properties of tracheas following two different decellularization protocols, including one that has been used clinically. All decellularized tracheas deviated from native mechanical behavior, which may provide insights into observed in vivo graft failures. We further analyzed protein content by western blot and analyzed microstructure by histological staining and found that the specific method of decellularization resulted in significant differences in the depletion of proteoglycans and degradation of collagens I, II, III, and elastin. Taken together, this work demonstrates that the heterogeneous architecture and mechanical behavior of the trachea is severely compromised by decellularization. Such structural deterioration may contribute to graft failure clinically and limit the potential of decellularized native tracheas as viable long-term orthotopic airway replacements.

From waste to wealth: Repurposing slaughterhouse waste for xenotransplantation

Slaughterhouses produce large quantities of biological waste, and most of these materials are underutilized. In many published reports, the possibility of repurposing this form of waste to create biomaterials, fertilizers, biogas, and feeds has been discussed. However, the employment of particular offal wastes in xenotransplantation has yet to be extensively uncovered. Overall, viable transplantable tissues and organs are scarce, and developing bioartificial components using such discarded materials may help increase their supply. This perspective manuscript explores the viability and sustainability of readily available and easily sourced slaughterhouse waste, such as blood vessels, eyes, kidneys, and tracheas, as starting materials in xenotransplantation derived from decellularization technologies. The manuscript also examines the innovative use of animal stem cells derived from the excreta to create a bioartificial tissue/organ platform that can be translated to humans. Institutional and governmental regulatory approaches will also be outlined to support this endeavor.

Clinical and patient-reported outcomes of tissue engineering strategies for periodontal and peri-implant reconstruction

Scientific advancements in biomaterials, cellular therapies, and growth factors have brought new therapeutic options for periodontal and peri-implant reconstructive procedures. These tissue engineering strategies involve the enrichment of scaffolds with living cells or signaling molecules and aim at mimicking the cascades of wound healing events and the clinical outcomes of conventional autogenous grafts, without the need for donor tissue. Several tissue engineering strategies have been explored over the years for a variety of clinical scenarios, including periodontal regeneration, treatment of gingival recessions/mucogingival conditions, alveolar ridge preservation, bone augmentation procedures, sinus floor elevation, and peri-implant bone regeneration therapies. The goal of this article was to review the tissue engineering strategies that have been performed for periodontal and peri-implant reconstruction and implant site development, and to evaluate their safety, invasiveness, efficacy, and patient-reported outcomes. A detailed systematic search was conducted to identify eligible randomized controlled trials reporting the outcomes of tissue engineering strategies utilized for the aforementioned indications. A total of 128 trials were ultimately included in this review for a detailed qualitative analysis. Commonly performed tissue engineering strategies involved scaffolds enriched with mesenchymal or somatic cells (cell-based tissue engineering strategies), or more often scaffolds loaded with signaling molecules/growth factors (signaling molecule-based tissue engineering strategies). These approaches were found to be safe when utilized for periodontal and peri-implant reconstruction therapies and implant site development. Tissue engineering strategies demonstrated either similar or superior clinical outcomes than conventional approaches for the treatment of infrabony and furcation defects, alveolar ridge preservation, and sinus floor augmentation. Tissue engineering strategies can promote higher root coverage, keratinized tissue width, and gingival thickness gain than scaffolds alone can, and they can often obtain similar mean root coverage compared with autogenous grafts. There is some evidence suggesting that tissue engineering strategies can have a positive effect on patient morbidity, their preference, esthetics, and quality of life when utilized for the treatment of mucogingival deformities. Similarly, tissue engineering strategies can reduce the invasiveness and complications of autogenous graft-based staged bone augmentation. More studies incorporating patient-reported outcomes are needed to understand the cost-benefits of tissue engineering strategies compared with traditional treatments.

Scaffold-based tissue engineering: Supercritical carbon dioxide as an alternative method for decellularization and sterilization of dense materials

Development of ready-to-use biomaterials and scaffolds is vital for further advancement of scaffold-based tissue engineering in clinical practice. Scaffolds need to mimic 3D ultrastructure, have adequate mechanical strength, are biocompatible, non-immunogenic and need to promote tissue regeneration in vivo. Although decellularization of native tissues seems promising to deliver scaffolds that meet these criteria, adequate decellularization of hard, poorly penetrable and poorly diffusible tissues remains challenging whilst being a very time-consuming process. In this study, a method to decellularize hard, dense tissues using supercritical carbon-dioxide preceded by a freeze/thaw cycle and followed by several washing steps is presented, demonstrating decellularisation efficiency and substantially reduced production/handling time. Additionally, supercritical carbon-dioxide treatment was used as sterilization method, further reducing the time required to produce the final scaffold. Histological evaluation showed that, after fine-tuning of the process, a partially acellular scaffold was obtained, with preservation of glycosaminoglycans and collagen fibers, albeit that the amount of residual dsDNA was still higher then chemically decellularized tissue. Biomechanical properties of the scaffold were similar to the native, non-decellularized tissue. After sterilization with supercritical carbon-dioxide the simulated functional outcome was more similar to native trachea, when compared to sterilization using gamma irradiation. Thus, decellularization and sterilization using supercritical carbon-dioxide with washing steps is an effective method for dense cartilaginous materials, and tuneable to meet different demands in other applications, but further optimization may be required. STATEMENT OF SIGNIFICANCE: Further advancement of the use of tissue engineered tracheal constructs is restricted by the lack of the ideal scaffold. Decellularized trachea is considered a promising scaffold, but the hard, poorly diffusible tissue remains challenging while forming a very time consumable process. Decellularization using supercritical carbon dioxide (scCO₂) seems promising, resulting in efficient removal of cellular material while reducing production and handling time. Addition of scCO₂ as a sterilization method resulted in further time reduction while improving functional outcome in comparison with traditional sterilization methods. This study presents an promising alternative method for decellularization and sterilization of dense materials, which can be tuned to meet different demands in other applications.

Preclinical and clinical orthotopic transplantation of decellularized/engineered tracheal scaffolds: A systematic literature review

Severe tracheal injuries that cannot be managed by mobilization and end-to-end anastomosis represent an unmet clinical need and an urgent challenge to face in surgical practice; within this scenario, decellularized scaffolds (eventually bioengineered) are currently a tempting option among tissue engineered substitutes. The success of a decellularized trachea is expression of a balanced approach in cells removal while preserving the extracellular matrix (ECM) architecture/mechanical properties. Revising the literature, many Authors report about different methods for acellular tracheal ECMs development; however, only few of them verified the devices effectiveness by an orthotopic implant in animal models of disease. To support translational medicine in this field, here we provide a systematic review on studies recurring to decellularized/bioengineered tracheas implantation. After describing the specific methodological aspects, orthotopic implant results are verified. Furtherly, the only three clinical cases of compassionate use of tissue engineered tracheas are reported with a focus on outcomes.

Successful tracheal regeneration using biofabricated autologous analogues without artificial supports

Tracheas have a tubular structure consisting of cartilage rings continuously joined by a connective tissue membrane comprising a capillary network for tissue survival. Several tissue engineering efforts have been devoted to the design of scaffolds to produce complex structures. In this study, we successfully fabricated an artificial materials-free autologous tracheal analogue with engraftment ability by combining in vitro cell self-aggregation technique and in-body tissue architecture. The cartilage rings prepared by aggregating chondrocytes on designated culture grooves that induce cell self-aggregation were alternately connected to the connective tissues to form tubular tracheal analogues by subcutaneous embedding as in-body tissue architecture. The tracheal analogues allogeneically implanted into the rat trachea matured into native-like tracheal tissue by covering of luminal surfaces by the ciliated epithelium with mucus-producing goblet cells within eight months after implantation, while maintaining their structural integrity. Such autologous tracheal analogues would provide a foundation for further clinical research on the application of tissue-engineered tracheas to ensure their long-term functionality.

3D Printing in Regenerative Medicine: Technologies and Resources Utilized

Over the past ten years, the use of additive manufacturing techniques, also known as "3D printing", has steadily increased in a variety of scientific fields. There are a number of inherent advantages to these fabrication methods over conventional manufacturing due to the way that they work, which is based on the layer-by-layer material-deposition principle. These benefits include the accurate attribution of complex, pre-designed shapes, as well as the use of a variety of innovative raw materials. Its main advantage is the ability to fabricate custom shapes with an interior lattice network connecting them and a porous surface that traditional manufacturing techniques cannot adequately attribute. Such structures are being used for direct implantation into the human body in the biomedical field in areas such as bio-printing, where this potential is being heavily utilized. The fabricated items must be made of biomaterials with the proper mechanical properties, as well as biomaterials that exhibit characteristics such as biocompatibility, bioresorbability, and biodegradability, in order to meet the strict requirements that such procedures impose. The most significant biomaterials used in these techniques are listed in this work, but their advantages and disadvantages are also discussed in relation to the aforementioned properties that are crucial to their use.

Lessons learned from pre-clinical testing of xenogeneic decellularized esophagi in a rabbit model

Decellularization of esophagi from several species for tissue engineering is well described, but successful implantation in animal models of esophageal replacement has been challenging. The purpose of this study was to assess feasibility and applicability of esophageal replacement using decellularized porcine esophageal scaffolds in a new pre-clinical model. Following surgical replacement in rabbits with a vascularizing muscle flap, we observed successful anastomoses of decellularized scaffolds, cues of early neovascularization, and prevention of luminal collapse by the use of biodegradable stents. However, despite the success of the surgical procedure, the long-term survival was limited by the fragility of the animal model. Our results indicate that transplantation of a decellularized porcine scaffold is possible and vascular flaps may be useful to provide a vascular supply, but long-term outcomes require further pre-clinical testing in a different large animal model.

Bio-Engineered Scaffolds Derived from Decellularized Human Esophagus for Functional Organ Reconstruction

Esophageal reconstruction through bio-engineered allografts that highly resemble the peculiar properties of the tissue extracellular matrix (ECM) is a prospective strategy to overcome the limitations of current surgical approaches. In this work, human esophagus was decellularized for the first time in the literature by comparing three detergent-enzymatic protocols. After decellularization, residual DNA quantification and histological analyses showed that all protocols efficiently removed cells, DNA (<50 ng/mg of tissue) and muscle fibers, preserving collagen/elastin components. The glycosaminoglycan fraction was maintained (70–98%) in the decellularized versus native tissues, while immunohistochemistry showed unchanged expression of specific ECM markers (collagen IV, laminin). The proteomic signature of acellular esophagi corroborated the retention of structural collagens, basement membrane and matrix–cell interaction proteins. Conversely, decellularization led to the loss of HLA-DR expression, producing non-immunogenic allografts. According to hydroxyproline quantification, matrix collagen was preserved (2–6 µg/mg of tissue) after decellularization, while Second-Harmonic Generation imaging highlighted a decrease in collagen intensity. Based on uniaxial tensile tests, decellularization affected tissue stiffness, but sample integrity/manipulability was still maintained. Finally, the cytotoxicity test revealed that no harmful remnants/contaminants were present on acellular esophageal matrices, suggesting allograft biosafety. Despite the different outcomes showed by the three decellularization methods (regarding, for example, tissue manipulability, DNA removal, and glycosaminoglycans/hydroxyproline contents) the ultimate validation should be provided by future repopulation tests and in vivo orthotopic implant of esophageal scaffolds.

Regenerative medicine: postnatal approaches

Paper 2 of the paediatric regenerative medicine Series focuses on recent advances in postnatal approaches. New gene, cell, and niche-based technologies and their combinations allow structural and functional reconstitution and simulation of complex postnatal cell, tissue, and organ hierarchies. Organoid and tissue engineering advances provide human disease models and novel treatments for both rare paediatric diseases and common diseases affecting all ages, such as COVID-19. Preclinical studies for gastrointestinal disorders are directed towards oesophageal replacement, short bowel syndrome, enteric neuropathy, biliary atresia, and chronic end-stage liver failure. For respiratory diseases, beside the first human tracheal replacement, more complex tissue engineering represents a promising solution to generate transplantable lungs. Genitourinary tissue replacement and expansion usually involve application of biocompatible scaffolds seeded with patient-derived cells. Gene and cell therapy approaches seem appropriate for rare paediatric diseases of the musculoskeletal system such as spinal muscular dystrophy, whereas congenital diseases of complex organs, such as the heart, continue to challenge new frontiers of regenerative medicine.

3D in vitro Models of Pathological Skeletal Muscle: Which Cells and Scaffolds to Elect?

Skeletal muscle is a fundamental tissue of the human body with great plasticity and adaptation to diseases and injuries. Recreating this tissue in vitro helps not only to deepen its functionality, but also to simulate pathophysiological processes. In this review we discuss the generation of human skeletal muscle three-dimensional (3D) models obtained through tissue engineering approaches. First, we present an overview of the most severe myopathies and the two key players involved: the variety of cells composing skeletal muscle tissue and the different components of its extracellular matrix. Then, we discuss the peculiar characteristics among diverse in vitro models with a specific focus on cell sources, scaffold composition and formulations, and fabrication techniques. To conclude, we highlight the efficacy of 3D models in mimicking patient-specific myopathies, deepening muscle disease mechanisms or investigating possible therapeutic effects.

Enhancing Stem Cell-Based Therapeutic Potential by Combining Various Bioengineering Technologies

Stem cell-based therapeutics have gained tremendous attention in recent years due to their wide range of applications in various degenerative diseases, injuries, and other health-related conditions. Therapeutically effective bone marrow stem cells, cord blood- or adipose tissue-derived mesenchymal stem cells (MSCs), embryonic stem cells (ESCs), and more recently, induced pluripotent stem cells (iPSCs) have been widely reported in many preclinical and clinical studies with some promising results. However, these stem cell-only transplantation strategies are hindered by the harsh microenvironment, limited cell viability, and poor retention of transplanted cells at the sites of injury. In fact, a number of studies have reported that less than 5% of the transplanted cells are retained at the site of injury on the first day after transplantation, suggesting extremely low (<1%) viability of transplanted cells. In this context, 3D porous or fibrous national polymers (collagen, fibrin, hyaluronic acid, and chitosan)-based scaffold with appropriate mechanical features and biocompatibility can be used to overcome various limitations of stem cell-only transplantation by supporting their adhesion, survival, proliferation, and differentiation as well as providing elegant 3-dimensional (3D) tissue microenvironment. Therefore, stem cell-based tissue engineering using natural or synthetic biomimetics provides novel clinical and therapeutic opportunities for a number of degenerative diseases or tissue injury. Here, we summarized recent studies involving various types of stem cell-based tissue-engineering strategies for different degenerative diseases. We also reviewed recent studies for preclinical and clinical use of stem cell-based scaffolds and various optimization strategies.

Building gut from scratch - progress and update of intestinal tissue engineering

Short bowel syndrome (SBS), a condition defined by insufficient absorptive intestinal epithelium, is a rare disease, with an estimated prevalence up to 0.4 in 10,000 people. However, it has substantial morbidity and mortality for affected patients. The mainstay of treatment in SBS is supportive, in the form of intravenous parenteral nutrition, with the aim of achieving intestinal autonomy. The lack of a definitive curative therapy has led to attempts to harness innate developmental and regenerative mechanisms to engineer neo-intestine as an alternative approach to addressing this unmet clinical need. Exciting advances have been made in the field of intestinal tissue engineering (ITE) over the past decade, making a review in this field timely. In this Review, we discuss the latest advances in the components required to engineer intestinal grafts and summarize the progress of ITE. We also explore some key factors to consider and challenges to overcome when transitioning tissue-engineered intestine towards clinical translation, and provide the future outlook of ITE in therapeutic applications and beyond.

Tissue-engineered composite tracheal grafts create mechanically stable and biocompatible airway replacements

We tested composite tracheal grafts (CTG) composed of a partially decellularized tracheal graft (PDTG) combined with a 3-dimensional (3D)-printed airway splint for use in long-segment airway reconstruction. CTG is designed to recapitulate the 3D extracellular matrix of the trachea with stable mechanical properties imparted from the extraluminal airway splint. We performed segmental orthotopic tracheal replacement in a mouse microsurgical model. MicroCT was used to measure graft patency. Tracheal neotissue formation was quantified histologically. Airflow dynamic properties were analyzed using computational fluid dynamics. We found that CTG are easily implanted and did not result in vascular erosion, tracheal injury, or inflammation. Graft epithelialization and endothelialization were comparable with CTG to control. Tracheal collapse was absent with CTG. Composite tracheal scaffolds combine biocompatible synthetic support with PDTG, supporting the regeneration of host epithelium while maintaining graft structure.

Highlights on Advancing Frontiers in Tissue Engineering

The field of tissue engineering continues to advance, sometimes in exponential leaps forward, but also sometimes at a rate that does not fulfill the promise that the field imagined a few decades ago. This review is in part a catalog of success in an effort to inform the process of innovation. Tissue engineering has recruited new technologies and developed new methods for engineering tissue constructs that can be used to mitigate or model disease states for study. Key to this antecedent statement is that the scientific effort must be anchored in the needs of a disease state and be working toward a functional product in regenerative medicine. It is this focus on the wildly important ideas coupled with partnered research efforts within both academia and industry that have shown most translational potential. The field continues to thrive and among the most important recent developments are the use of three-dimensional bioprinting, organ-on-a-chip, and induced pluripotent stem cell technologies that warrant special attention. Developments in the aforementioned areas as well as future directions are highlighted in this article. Although several early efforts have not come to fruition, there are good examples of commercial profitability that merit continued investment in tissue engineering. Impact statement Tissue engineering led to the development of new methods for regenerative medicine and disease models. Among the most important recent developments in tissue engineering are the use of three-dimensional bioprinting, organ-on-a-chip, and induced pluripotent stem cell technologies. These technologies and an understanding of them will have impact on the success of tissue engineering and its translation to regenerative medicine. Continued investment in tissue engineering will yield products and therapeutics, with both commercial importance and simultaneous disease mitigation.

The Growing Medical Need for Tracheal Replacement: Reconstructive Strategies Should Overcome Their Limits

Breathing, being predominantly an automatic action, is often taken for granted. However, respiratory diseases affect millions of people globally, emerging as one of the major causes of disability and death overall. Among the respiratory dysfunctions, tracheal alterations have always represented a primary challenge for clinicians, biologists, and engineers. Indeed, in the case of wide structural alterations involving more than 50% of the tracheal length in adults or 30% in children, the available medical treatments are ineffective or inapplicable. So far, a plethora of reconstructive approaches have been proposed and clinically applied to face this growing, unmet medical need. Unfortunately, none of them has become a well-established and routinely applied clinical procedure to date. This review summarizes the main clinical reconstructive attempts and classifies them as non-tissue engineering and tissue engineering strategies. The analysis of the achievements and the main difficulties that still hinder this field, together with the evaluation of the forefront preclinical experiences in tracheal repair/replacement, is functional to promote a safer and more effective clinical translation in the near future.

Development of a porcine acellular bladder matrix for tissue-engineered bladder reconstruction

PURPOSE

Enterocystoplasty is adopted for patients requiring bladder augmentation, but significant long-term complications highlight need for alternatives. We established a protocol for creating a natural-derived bladder extracellular matrix (BEM) for developing tissue-engineered bladder, and investigated its structural and functional characteristics.

METHODS

Porcine bladders were de-cellularised with a dynamic detergent-enzymatic treatment using peristaltic infusion. Samples and fresh controls were evaluated using histological staining, ultrastructure (electron microscopy), collagen, glycosaminoglycans and DNA quantification and biomechanical testing. Compliance and angiogenic properties (Chicken chorioallantoic membrane [CAM] assay) were evaluated. T test compared stiffness and glycosaminoglycans, collagen and DNA quantity. p value of < 0.05 was regarded as significant.

RESULTS

Histological evaluation demonstrated absence of cells with preservation of tissue matrix architecture (collagen and elastin). DNA was 0.01 μg/mg, significantly reduced compared to fresh tissue 0.13 μg/mg (p < 0.01). BEM had increased tensile strength (0.259 ± 0.022 vs 0.116 ± 0.006, respectively, p < 0.0001) and stiffness (0.00075 ± 0.00016 vs 0.00726 ± 0.00216, p = 0.011). CAM assay showed significantly increased number of convergent allantoic vessels after 6 days compared to day 1 (p < 0.01). Urodynamic studies showed that BEM maintains or increases capacity and compliance.

CONCLUSION

Dynamic detergent-enzymatic treatment produces a BEM which retains structural characteristics, increases strength and stiffness and is more compliant than native tissue. Furthermore, BEM shows angiogenic potential. These data suggest the use of BEM for development of tissue-engineered bladder for patients requiring bladder augmentation.

Tissue Engineering for Tracheal Replacement: Strategies and Challenges

The critical feature in trachea replacement is to provide a hollow cylindrical framework that is laterally stable and longitudinally flexible, facilitating cartilage and epithelial tissue formation. Despite advanced techniques and sources of materials used, most inherent challenges are related to the complexity of its anatomy. Limited blood supply leads to insufficient regenerative capacity for cartilage and epithelium. Natural and synthetic scaffolds, different types of cells, and growth factors are part of tissue engineering approaches with varying outcomes. Pre-vascularization remains one of the crucial factors to expedite the regenerative process in tracheal reconstruction. This review discusses the challenges and strategies used in tracheal tissue engineering, focusing on scaffold implantation in clinical and preclinical studies conducted in recent decades.

Tissue engineering of the gastrointestinal tract: the historic path to translation

The gastrointestinal (GI) tract is imperative for multiple functions including digestion, nutrient absorption, and timely waste disposal. The central feature of the gut is peristalsis, intestinal motility, which facilitates all of its functions. Disruptions in GI motility lead to sub-optimal GI function, resulting in a lower quality of life in many functional GI disorders. Over the last two decades, tissue engineering research directed towards the intestine has progressed rapidly due to advances in cell and stem-cell biology, integrative physiology, bioengineering and biomaterials. Newer biomedical tools (including optical tools, machine learning, and nuanced regenerative engineering approaches) have expanded our understanding of the complex cellular communication within the GI tract that lead to its orchestrated physiological function. Bioengineering therefore can be utilized towards several translational aspects: (i) regenerative medicine to remedy/restore GI physiological function; (ii) in vitro model building to mimic the complex physiology for drug and pharmacology testing; (iii) tool development to continue to unravel multi-cell communication networks to integrate cell and organ-level physiology. Despite the significant strides made historically in GI tissue engineering, fundamental challenges remain including the quest for identifying autologous human cell sources, enhanced scaffolding biomaterials to increase biocompatibility while matching viscoelastic properties of the underlying tissue, and overall biomanufacturing. This review provides historic perspectives for how bioengineering has advanced over time, highlights newer advances in bioengineering strategies, and provides a realistic perspective on the path to translation.

Monitoring tissue engineered constructs and protocols with laboratory-based x-ray phase contrast tomography

Tissue engineering (TE) aims to generate bioengineered constructs which can offer a surgical treatment for many conditions involving tissue or organ loss. Construct generation must be guided by suitable assessment tools. However, most current tools (e.g. histology) are destructive, which restricts evaluation to a single-2D anatomical plane, and has no potential for assessing constructs prior to or following their implantation. An alternative can be provided by laboratory-based x-ray phase contrast computed tomography (PC-CT), which enables the extraction of 3D density maps of an organ's anatomy. In this work, we developed a semi-automated image processing pipeline dedicated to the analysis of PC-CT slices of oesophageal constructs. Visual and quantitative (density and morphological) information is extracted on a volumetric basis, enabling a comprehensive evaluation of the regenerated constructs. We believe the presented tools can enable the successful regeneration of patient-specific oesophagus, and bring comparable benefit to a wide range of TE applications. STATEMENT OF SIGNIFICANCE: Phase contrast computed tomography (PC-CT) is an imaging modality which generates high resolution volumetric density maps of biological tissue. In this work, we demonstrate the use of PC-CT as a new tool for guiding the progression of an oesophageal tissue engineering (TE) protocol. Specifically, we developed a semi-automated image-processing pipeline which analyses the oesophageal PC-CT slices, extracting visual and quantitative (density and morphological) information. This information was proven key for performing a comprehensive evaluation of the regenerated constructs, and cannot be obtained through existing assessment tools primarily due to their destructive nature (e.g. histology). This work paves the way for using PC-CT in a wide range of TE applications which can be pivotal for unlocking the potential of this field.

Development and clinical translation of tubular constructs for tracheal tissue engineering: a review

Effective restoration of extensive tracheal damage arising from cancer, stenosis, infection or congenital abnormalities remains an unmet clinical need in respiratory medicine. The trachea is a 10-11 cm long fibrocartilaginous tube of the lower respiratory tract, with 16-20 tracheal cartilages anterolaterally and a dynamic trachealis muscle posteriorly. Tracheal resection is commonly offered to patients suffering from short-length tracheal defects, but replacement is required when the trauma exceeds 50% of total length of the trachea in adults and 30% in children. Recently, tissue engineering (TE) has shown promise to fabricate biocompatible tissue-engineered tracheal implants for tracheal replacement and regeneration. However, its widespread use is hampered by inadequate re-epithelialisation, poor mechanical properties, insufficient revascularisation and unsatisfactory durability, leading to little success in the clinical use of tissue-engineered tracheal implants to date. Here, we describe in detail the historical attempts and the lessons learned for tracheal TE approaches by contextualising the clinical needs and essential requirements for a functional tracheal graft. TE manufacturing approaches explored to date and the clinical translation of both TE and non-TE strategies for tracheal regeneration are summarised to fully understand the big picture of tracheal TE and its impact on clinical treatment of extensive tracheal defects.

Decellularized tracheal scaffolds in tracheal reconstruction: An evaluation of different techniques

In humans, the trachea is a conduit for ventilation connecting the throat and lungs. However, certain congenital or acquired diseases may cause long-term tracheal defects that require replacement. Tissue engineering is considered a promising method to reconstruct long-segment tracheal lesions and restore the structure and function of the trachea. Decellularization technology retains the natural structure of the trachea, has good biocompatibility and mechanical properties, and is currently a hotspot in tissue engineering studies. This article lists various recent representative protocols for the generation of decellularized tracheal scaffolds (DTSs), as well as their validity and limitations. Based on the advancements in decellularization methods, we discussed the impact and importance of mechanical properties, revascularization, recellularization, and biocompatibility in the production and implantation of DTS. This review provides a basis for future research on DTS and its application in clinical therapy.

Planar organization of airway epithelial cell morphology using hydrogel grooves during ciliogenesis fails to induce ciliary alignment

Topographical cues are known to influence cell organization both in native tissues and in vitro. In the trachea, the matrix beneath the epithelial lining is composed of collagen fibres that run along the long axis of the airway. Previous studies have shown that grooved topography can induce morphological and cytoskeletal alignment in epithelial cell lines. In the present work we assessed the impact of substrate topography on the organization of primary human tracheal epithelial cells (HTECs) and human induced pluripotent stem cell (hiPSC)-derived airway progenitors and the resulting alignment of cilia after maturation of the airway cells under Air-Liquid-Interface (ALI) culture. Grooves with optimized dimensions were imprinted into collagen vitrigel membranes (CVM) to produce gel inserts for ALI culture. Grooved CVM substrates induced cell alignment in HTECs and hiPSC airway progenitors in submerged culture. Further, both cell types were able to terminally differentiate into a multi-ciliated epithelium on both flat and groove CVM substrates. When exposed to ALI conditions, HTECs lost alignment after 14 days. Meanwhile, hiPSC-derived airway progenitors maintained their alignment throughout 31 days of ALI culture. Interestingly, neither initial alignment on the grooves, nor maintained alignment on the grooves induced alignment of cilia basal bodies, an indication of the direction of ciliary beating direction in the airway cells. Planar organization of airway cells during or prior to ciliogenesis therefore does not appear to be a feasible strategy to control cilia organization and subsequent airway epithelial function and additional cues are likely necessary to produce cilia alignment.

UK paediatric surgical academic output (2005-2020): A cause for concern?

BACKGROUND

The publication record can be regarded as a key metric of the academic output of a craft surgical speciality with an almost exponential increase in the number of such publications worldwide over the past 20 years (Ashfaq et al. J Surg Res 2018;229:10-11). We aimed to examine and explore if this was the experience within UK paediatric surgery centres.

METHODS

The academic search engine Scopus™ (Elsevier) was used to track every paediatric surgeon's (NHS or University) publication history between Jan. 2005 - Dec. 2020. This was validated by an algorithmic search of PubMed™. The h-index (citations/publication), considered a validated metric of career academic output, was also calculated for each individual surgeon. A Field-Weighted Citation Index (Scopus™) (FWCI) was used to assess impact of individual publications. Textbooks, book chapters, abstracts, duplications ("double dipping") and output attributed to UK BAPS-CASS national studies were excluded. Some output(s), not considered as relevant to "paediatric surgery", was edited. Data are quoted as median(range).

RESULTS

During this 16-year period, there were 3838 publications identified from 26 centres with a "top ten" listing of those paediatric surgical units contributing over half the output (n = 2189, 57%). To look for evidence of trend(s) we analysed the output from these surgical centres in two 5-year periods (2005-9 and 2015-19) and showed an overall fall in output(s) - [730 (53.4%) to 645 (46.4%)] with 6/10 (60%) ' top ten ' centres here recording a reduction in publications. The median h-index of the 232 contributing paediatric surgical consultants was 12 (range 1-56). The best performing publication from the "top ten" centres had 96.5(51-442) citations with the FWCI being 4.5 (2.2 - 30.2).

CONCLUSIONS

This study highlights current paediatric surgery publication output metrics in UK centres. There is evidence of a relative reduction in outputs overall which is a cause for concern for the future, although individual publications from the 10 most active units in the UK remain highly cited. These findings may serve purpose in several ways: (i) UK paediatric surgical centre rankings may be helpful for guiding residency / trainee application; (ii) surgical research funding for the top performing units may be better facilitated and finally (iii) UK centres showing a ' fertile ground ' for nurturing and training paediatric surgeons with academic aspirations could be useful for future workforce planning.