Substrate and binding specificities of bacterial polyhydroxybutyrate depolymerases

Nature-Inspired Strategies for Sustainable Degradation of Synthetic Plastics

Synthetic plastics have become integral to our daily lives, yet their escalating production, limited biodegradability, and inadequate waste management contribute to environmental contamination. Biological plastic degradation is one promising strategy to address this pollution. The inherent chemical and physical properties of synthetic plastics, however, pose challenges for microbial enzymes, hindering the effective degradation and the development of a sustainable biological recycling process. This Perspective explores alternative, nature-inspired strategies designed to overcome some key limitations in currently available plastic-degrading enzymes. Nature's refined degradation pathways for natural polymers, such as cellulose, present a compelling framework for the development of efficient technologies for enzymatic plastic degradation. By drawing insights from nature, we propose a general strategy of employing substrate binding domains to improve targeting and multienzyme scaffolds to overcome enzymatic efficiency limitations. As one potential application, we outline a multienzyme pathway to upcycle polyethylene into alkenes. Employing nature-inspired strategies can present a path toward sustainable solution to the environmental impact of synthetic plastics.

Can bioplastics always offer a truly sustainable alternative to fossil-based plastics?

Bioplastics, comprised of bio-based and/or biodegradable polymers, have the potential to play a crucial role in the transition towards a sustainable circular economy. The use of biodegradable polymers not only leads to reduced greenhouse gas emissions but also might address the problem of plastic waste persisting in the environment, especially when removal is challenging. Nevertheless, biodegradable plastics should not be considered as substitutes for proper waste management practices, given that their biodegradability strongly depends on environmental conditions. Among the challenges hindering the sustainable implementation of bioplastics in the market, the development of effective downstream recycling routes is imperative, given the increasing production volumes of these materials. Here, we discuss about the most advisable end-of-life scenarios for bioplastics. Various recycling strategies, including mechanical, chemical or biological (both enzymatic and microbial) approaches, should be considered. Employing enzymes as biocatalysts emerges as a more selective and environmentally friendly alternative to chemical recycling, allowing the production of new bioplastics and added value and high-quality products. Other pending concerns for industrial implementation of bioplastics include misinformation among end users, the lack of a standardised bioplastic labelling, unclear life cycle assessment guidelines and the need for higher financial investments. Although further research and development efforts are essential to foster the sustainable and widespread application of bioplastics, significant strides have already been made in this direction.

Enrichment of native plastic-associated biofilm communities to enhance polyester degrading activity

Plastic pollution is an increasing worldwide problem urgently requiring a solution. While recycling rates are increasing globally, only 9% of all plastic waste has been recycled, and with the cost and limited downstream uses of recycled plastic, an alternative is needed. Here, we found that expanded polystyrene (EPS) promoted high levels of bacterial biofilm formation and sought out environmental EPS waste to characterize these native communities. We demonstrated that the EPS attached communities had limited plastic degrading activity. We then performed a long-term enrichment experiment where we placed a robust selection pressure on these communities by limiting carbon availability such that the waste plastic was the only carbon source. Seven of the resulting enriched bacterial communities had increased plastic degrading activity compared to the starting bacterial communities. Pseudomonas stutzeri was predominantly identified in six of the seven enriched communities as the strongest polyester degrader. Sequencing of one isolate of P. stutzeri revealed two putative polyesterases and one putative MHETase. This indicates that waste plastic-associated biofilms are a source for bacteria that have plastic-degrading potential, and that this potential can be unlocked through selective pressure and further in vitro enrichment experiments, resulting in biodegradative communities that are better than nature.

Isolation and characterization of polyhydroxyalkanoate-degrading bacteria in seawater at two different depths from Suruga Bay

IMPORTANCE

Polyhydroxyalkanoate (PHA) is a highly biodegradable microbial polyester, even in marine environments. In this study, we incorporated an enrichment culture-like approach in the process of isolating marine PHA-degrading bacteria. The resulting 91 isolates were suggested to fall into five genera (Alloalcanivorax, Alteromonas, Arenicella, Microbacterium, and Pseudoalteromonas) based on 16S rRNA analysis, including two novel genera (Arenicella and Microbacterium) as marine PHA-degrading bacteria. Microbacterium schleiferi (DSM 20489) and Alteromonas macleodii (NBRC 102226), the type strains closest to the several isolates, have an extracellular poly(3-hydroxybutyrate) [P(3HB)] depolymerase homolog that does not fit a marine-type domain composition. However, A. macleodii exhibited no PHA degradation ability, unlike M. schleiferi. This result demonstrates that the isolated Alteromonas spp. are different species from A. macleodii. P(3HB) depolymerase homologs in the genus Alteromonas should be scrutinized in the future, particularly about which ones work as the depolymerase.

Large-scale omics dataset of polymer degradation provides robust interpretation for microbial niche and succession on different plastisphere

While biodegradable polymers have received increased attention due to the recent marine plastic problem, few studies have compared microbiomes and their degradation processes among biodegradable polymers. In this study, we set up prompt evaluation systems for polymer degradation, allowing us to collect 418 microbiome and 125 metabolome samples to clarify the microbiome and metabolome differences according to degradation progress and polymer material (polycaprolactone [PCL], polybutylene succinate-co-adipate [PBSA], polybutylene succinate [PBS], polybutylene adipate-co-terephthalate [PBAT], and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [PHBH]). The microbial community compositions were converged to each polymer material, and the largest differences were observed between PHBH and other polymers. Such gaps were probably formed primarily by the presence of specific hydrolase genes (i.e., 3HB depolymerase, lipase, and cutinase) in the microorganisms. Time-series sampling suggested several steps for microbial succession: (1) initial microbes decrease abruptly after incubation starts; (2) microbes, including polymer degraders, increase soon after the start of incubation and show an intermediate peak; (3) microbes, including biofilm constructers, increase their abundance gradually. Metagenome prediction showed functional changes, where free-swimming microbes with flagella adhered stochastically onto the polymer, and certain microbes started to construct a biofilm. Our large-dataset-based results provide robust interpretations for biodegradable polymer degradation.

Sustainable Polythioesters via Thio(no)lactones: Monomer Synthesis, Ring-Opening Polymerization, End-of-Life Considerations, and Industrial Perspectives

As the environmental effects of plastics are of ever greater concern, the industry is driven towards more sustainable polymers. Besides sustainability, our fast-developing society imposes the need for highly versatile materials. Whereas aliphatic polyesters (PEs) are widely adopted and studied as next-generation biobased and (bio)degradable materials, their sulfur-containing analogs, polythioesters (PTEs), only recently gained attention. Nevertheless, the introduction of S atoms is known to often enhance thermal, mechanical, electrochemical, and optical properties, offering prospects for broad applicability. Furthermore, thanks to their thioester-based backbone, PTEs are inherently susceptible to degradation, giving them a high sustainability potential. The key route to PTEs is through ring-opening polymerization (ROP) of thio(no)lactones. This Review critically discusses the (potential) sustainability of the most relevant state-of-the-art in every step from sulfur source to end-of-life treatment options of PTEs, obtained through ROP of thio(no)lactones. The benefits and drawbacks of PTEs versus PEs are highlighted, including their industrial perspective.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

From Organic Wastes and Hydrocarbons Pollutants to Polyhydroxyalkanoates: Bioconversion by Terrestrial and Marine Bacteria

The use of fossil-based plastics has become unsustainable because of the polluting production processes, difficulties for waste management sectors, and high environmental impact. Polyhydroxyalkanoates (PHA) are bio-based biodegradable polymers derived from renewable resources and synthesized by bacteria as intracellular energy and carbon storage materials under nutrients or oxygen limitation and through the optimization of cultivation conditions with both pure and mixed culture systems. The PHA properties are affected by the same principles of oil-derived polyolefins, with a broad range of compositions, due to the incorporation of different monomers into the polymer matrix. As a consequence, the properties of such materials are represented by a broad range depending on tunable PHA composition. Producing waste-derived PHA is technically feasible with mixed microbial cultures (MMC), since no sterilization is required; this technology may represent a solution for waste treatment and valorization, and it has recently been developed at the pilot scale level with different process configurations where aerobic microorganisms are usually subjected to a dynamic feeding regime for their selection and to a high organic load for the intracellular accumulation of PHA. In this review, we report on studies on terrestrial and marine bacteria PHA-producers. The available knowledge on PHA production from the use of different kinds of organic wastes, and otherwise, petroleum-polluted natural matrices coupling bioremediation treatment has been explored. The advancements in these areas have been significant; they generally concern the terrestrial environment, where pilot and industrial processes are already established. Recently, marine bacteria have also offered interesting perspectives due to their advantageous effects on production practices, which they can relieve several constraints. Studies on the use of hydrocarbons as carbon sources offer evidence for the feasibility of the bioconversion of fossil-derived plastics into bioplastics.

PlasticDB: a database of microorganisms and proteins linked to plastic biodegradation

The number of publications reporting putative plastic-degrading microbes and proteins is continuously increasing, necessitating the compilation of these data and the development of tools to facilitate their analysis. We developed the PlasticDB web application to address this need, which comprises a database of microorganisms and proteins reported to biodegrade plastics. Associated metadata, such as the techniques utilized to assess biodegradation, the environmental source of microbial isolate and presumed thermophilic traits are also reported. Proteins in the database are categorized according to the plastic type they are reported to degrade. Each protein structure has been predicted in silico and can be visualized or downloaded for further investigation. In addition to standard database functionalities, such as searching, filtering and retrieving database records, we implemented several analytical tools that accept inputs, including gene, genome, metagenome, transcriptomes, metatranscriptomes and taxa table data. Users can now analyze their datasets for the presence of putative plastic-degrading species and potential plastic-degrading proteins and pathways from those species. Database URL:http://plasticdb.org.

A Novel Actinobacterial Cutinase Containing a Non-Catalytic Polymer-Binding Domain

The single putative cutinase-encoding gene from the genome of Kineococcus radiotolerans SRS30216 was cloned and expressed in Escherichia coli as a secreted fusion protein, designated YebF-KrCUT, where YebF is the extracellular carrier protein. The 294-amino acid sequence of KrCUT is unique among currently characterized cutinases by having a C-terminal extension that consists of a short (Pro-Thr)-rich linker and a 55-amino-acid region resembling the substrate binding domain of poly(hydroxybutyrate) (PHB) depolymerases. Phylogenetically, KrCUT takes a unique position among known cutinases and cutinase-like proteins of bacterial and fungal origin. A modeled structure of KrCUT, although displaying a typical α/ß hydrolase fold, shows some unique loops close to the catalytic site. The 39-kDa YebF-KrCUT fusion protein and a truncated variant thereof were purified to electrophoretic homogeneity and functionally characterized. The melting temperatures (T_m) of KrCUT and its variant KrCUT206 devoid of the putative PHB-binding domain were established to be very similar at 50-51°C. Cutinase activity was confirmed by the appearance of characteristic cutin components, C₁₆ and C₁₈ hydroxyl fatty acids, in the mass chromatograms following incubation of KrCUT with apple cutin as substrate. KrCUT also efficiently degraded synthetic polyesters such as polycaprolactone and poly(1,3-propylene adipate). Although incapable of PHB depolymerization, KrCUT could efficiently bind PHB, confirming the predicted characteristic of the C-terminal region. KrCUT also potentiated the activity of pectate lyase in the degradation of pectin from hemp fibres. This synergistic effect is relevant to the enzyme retting process of natural fibres. IMPORTANCE. To date only a limited number of cutinases have been isolated and characterized from nature, the majority being sourced from phytopathogenic fungi and thermophilic bacteria. The significance of our research relates to the identification and characterization of a unique member of microbial cutinases, of name KrCUT, that was derived from the genome of the Gram-positive Kineococcus radiotolerans SRS30216, a highly radiation-resistant actinobacterium. Given the wide-ranging importance of cutinases in applications such as the degradation of natural and synthetic polymers, in the textile industry, in laundry detergents, or in biocatalysis (e.g., transesterification reactions), our results could foster new research leading to broader biotechnological impacts. This study also demonstrated that genome mining or prospecting is a viable means to discover novel biocatalysts as environmentally friendly and biotechnological tool.

Microplastic contaminants in the aqueous environment, fate, toxicity consequences, and remediation strategies

Microplastic is a fragmented plastic part that emerges as a potential marine and terrestrial contaminant. The microplastic wastes in marine and soil environments cause severe problems in living systems. Microplastic wastes have been linked to various health problems, including reproductive harm and obesity, plus issues such as organ problems and developmental delays in children. Recycling plastic/microplastics from the environment is very low, so remediating these polymers after their utilization is of paramount concern. The microplastic causes severe toxic effects and contaminates the environment. Microplastic affects marine life, microorganism in soil, soil enzymes, plants system, and physicochemical properties. Ecotoxicology of the microplastic raised many questions about its use and development from the environment. Various physicochemical and microbial technologies have been developed for their remediation from the environment. The microplastic effects are linked with its concentration, size, and shape in contaminated environments. Microplastic is able to sorb the inorganic and organic contaminants and affect their fate into the contaminated sites. Microbial technology is considered safer for the remediation of the microplastics via its unique metabolic machinery. Bioplastic is regarded as safer and eco-friendly as compared to plastics. The review article explored an in-depth understanding of the microplastic, its fate, toxicity to the environment, and robust remediation strategies.

Enhancing PET hydrolytic enzyme activity by fusion of the cellulose-binding domain of cellobiohydrolase I from Trichoderma reesei

The large amounts of polyethylene terephthalate (PET) that enter and accumulate in the environment have posed a serious threat to global ecosystems and human health. A PET hydrolase from PET-assimilating bacterium Ideonella sakaiensis (IsPETase) that exhibits superior PET hydrolytic activity at mild conditions is attracting enormous attention in development of plastic biodegrading strategies. In order to enhance the PET hydrolysis capacity of IsPETase, we selected several polymer-binding domains that can adhere to a hydrophobic polymer surface and fused these to a previously engineered IsPETase^{S121E/D186H/R280A} (IsPETase^EHA) variant. We found that fusing a cellulose-binding domain (CBM) of cellobiohydrolase I from Trichoderma reesei onto the C-terminus of IsPETase^EHA showed a stimulatory effect on enzymatic hydrolysis of PET. Compared to the parental enzyme, IsPETase^EHA_CBM exhibited 71.5 % and 44.5 % higher hydrolytic activity at 30 ℃ and 40 ℃, respectively. The catalytic activity of IsPETase^EHA_CBM was increased by 86 % when the protein concentration was increased from 2.5 μg/mL to 20 μg/mL. These findings suggest that the fusion of polymer-binding module to IsPETase is a promising strategy to stimulate the enzymatic hydrolysis of PET.

Anchor peptides promote degradation of mixed plastics for recycling

Resource stewardship and sustainable use of natural resources is mandatory for a circular plastic economy. The discovery of microbes and enzymes that can selectively degrade mixed-plastic waste enables to recycle plastics. Knowledge on how to achieve efficient and selective enzymatic plastic degradation is a key prerequisite for biocatalytic recycling of plastics. Wild-type natural polymer degrading enzymes such as cellulases pose often selective non-catalytic binding domains that facilitate a targeting and efficient degradation of polymeric substrates. Recently identified polyester hydrolases with synthetic polymer degrading activities, however, lack in general such selective domains. Inspired by nature, we herein report a protocol for the identification and engineering of anchor peptides which serve as non-catalytic binding domains specifically toward synthetic plastics. The identified anchor peptides hold the promise to be fused to known plastic degrading enzymes and thereby enhance the efficiency of biocatalytic plastic recycling processes.

Biodegradability of poly(3-hydroxyalkanoate) and poly(ε-caprolactone) via biological carbon cycles in marine environments

Approximately 4.8–12.7 million tons of plastic waste has been estimated to be discharged into marine environments annually by wind and river currents. The Ellen MacArthur Foundation warns that the total weight of plastic waste in the oceans will exceed the total weight of fish in 2050 if the environmental runoff of plastic continues at the current rate. Hence, biodegradable plastics are attracting attention as a solution to the problems caused by plastic waste. Among biodegradable plastics, polyhydroxyalkanoates (PHAs) and poly(ε-caprolactone) (PCL) are particularly noteworthy because of their excellent marine biodegradability. In this review, the biosynthesis of PHA and cutin, a natural analog of PCL, and the biodegradation of PHA and PCL in carbon cycles in marine ecosystems are discussed. PHA is biosynthesized and biodegraded by various marine microbes in a wide range of marine environments, including coastal, shallow-water, and deep-sea environments. Marine cutin is biosynthesized by marine plants or obtained from terrestrial environments, and PCL and cutin are biodegraded by cutin hydrolytic enzyme-producing microbes in broad marine environments. Thus, biological carbon cycles for PHA and PCL exist in the marine environment, which would allow materials made of PHA and PCL to be quickly mineralized in marine environments.

Microbial Polyhydroxyalkanoates and Nonnatural Polyesters

Microorganisms produce diverse polymers for various purposes such as storing genetic information, energy, and reducing power, and serving as structural materials and scaffolds. Among these polymers, polyhydroxyalkanoates (PHAs) are microbial polyesters synthesized and accumulated intracellularly as a storage material of carbon, energy, and reducing power under unfavorable growth conditions in the presence of excess carbon source. PHAs have attracted considerable attention for their wide range of applications in industrial and medical fields. Since the first discovery of PHA accumulating bacteria about 100 years ago, remarkable advances have been made in the understanding of PHA biosynthesis and metabolic engineering of microorganisms toward developing efficient PHA producers. Recently, nonnatural polyesters have also been synthesized by metabolically engineered microorganisms, which opened a new avenue toward sustainable production of more diverse plastics. Herein, the current state of PHAs and nonnatural polyesters is reviewed, covering mechanisms of microbial polyester biosynthesis, metabolic pathways, and enzymes involved in biosynthesis of short-chain-length PHAs, medium-chain-length PHAs, and nonnatural polyesters, especially 2-hydroxyacid-containing polyesters, metabolic engineering strategies to produce novel polymers and enhance production capabilities and fermentation, and downstream processing strategies for cost-effective production of these microbial polyesters. In addition, the applications of PHAs and prospects are discussed.

Designing Biobased Recyclable Polymers for Plastics

Several concurrent developments are shaping the future of plastics. A transition to a sustainable plastics system requires not only a shift to fossil-free feedstock and energy to produce the carbon-neutral building blocks for polymers used in plastics, but also a rational design of the polymers with both desired material properties for functionality and features facilitating their recyclability. Biotechnology has an important role in producing polymer building blocks from renewable feedstocks, and also shows potential for recycling of polymers. Here, we present strategies for improving the performance and recyclability of the polymers, for enhancing degradability to monomers, and for improving chemical recyclability by designing polymers with different chemical functionalities.

Targeting microplastic particles in the void of diluted suspensions

Accumulation of microplastic in the environment and food chain will be a grand challenge for our society. Polyurethanes are widely used synthetic polymers in medical (e.g. catheters) and industrial products (especially as foams). Polyurethane is not abundant in nature and only a few microbial strains (fungi and bacteria) and enzymes (polyurethaneases and cutinases) have been reported to efficiently degrade polyurethane. Notably, in nature a long period of time (from 50 to >100 years depending on the literature) is required for degradation of plastics. Material binding peptides (e.g. anchor peptides) bind strongly to polymers such as polypropylene, polyethylene terephthalate, and polyurethane and can target specifically polymers. In this study we report the fusion of the anchor peptide Tachystatin A2 to the bacterial cutinase Tcur1278 which accelerated the degradation of polyester-polyurethane nanoparticles by a factor of 6.6 in comparison to wild-type Tcur1278. Additionally, degradation half-lives of polyester-polyurethane nanoparticles were reduced from 41.8 h to 6.2 h (6.7-fold) in a diluted polyester-polyurethane suspension (0.04% w/v).

Co-Expression of ORFCma with PHB Depolymerase (PhaZCma ) in Escherichia coli Induces Efficient Whole-Cell Biodegradation of Polyesters

Whole-cell degradation of polyesters not only avoids the tedious process of enzyme separation, but also allows the degraded product to be reused as a carbon source. In this study, Escherichia coli BL21(DE3) harboring phaZ_Cma , a gene encoding poly(3-hydroxybutyrate) (PHB) depolymerase from Caldimonas manganoxidans, is constructed. The extra-cellular fraction of E. coli/pPHAZ exhibits a fast PHB degradation rate where it only took 35 h to completely degrade PHB films, while C. manganoxidans takes 81 h to do the same. The co-expression of ORF_Cma (a putative periplasmic substrate binding protein that is within the same operon of phaZ_Cma ) further improves the PHB degradation. While 28 h is needed for E. coli/pPHAZ to cause an 80% weight loss in PHB films, E. coli/pORFPHAZ needs only 21 h. Furthermore, it is able to degrade at-least four different polyesters, PHB, poly(lactic acid) (PLA), polycaprolactone (PCL), and poly(butylene succinate-co-adipate) (PBSA). Testing of the time course of 3-hydroxybutyrate concentration and the turbidity of the degradation solutions over time shows that PhaZ_Cma has both exo- and endo-enzymatic activity. The whole-cell E. coli/pORFPHAZ can be used for recycling various polyesters while ORF_Cma can potentially be a universal element for enhancing the secretion of recombinant protein.

Biomimetic engineering of modular bispecific antibodies for biomolecule immobilization

Modular bispecific antibodies (BsAb's) that interact directly with a gold surface were engineered for immobilization on biosensing devices. The BsAb's consist of the variable fragments of antigold and antilysozyme antibodies connected via one of three linkers derived from naturally occurring proteins. The BsAb's were bound tightly to both the gold surface and to lysozyme, thus functioning as interface molecules between lysozyme and the gold surface without a substantial loss of antigen-binding activity. The antigen-binding capacity (the ratio of the amount of immobilized lysozyme to the amount of immobilized BsAb) on the gold surface reached 82%. An analysis of the correlation between binding capacity and linker characteristics indicated that the presence of a long, rigid linker sequence derived from a cellulase resulted in a higher antigen-binding capacity than did the presence of a long but relatively flexible glycine-rich linker. This result suggests a strategy for designing linkers suitable for BsAb-based biomolecular immobilization.

Biosynthesis and biodegradation of 3-hydroxypropionate-containing polyesters

3-Hydroxypropionate (3HP) is an important compound in the chemical industry, and the polymerized 3HP can be used as a bioplastic. In this review, we focus on polyesters consisting of 3HP monomers, including the homopolyester poly(3-hydroxypropionate) and copolyesters poly(3-hydroxybutyrate-co-3-hydroxypropionate), poly(3-hydroxypropionate-co-3-hydroxybutyrate-co-3-hydroxyhexanoate-co-3-hydroxyoctanoate), poly(4-hydroxybutyrate-co-3-hydroxypropionate-co-lactate), and poly(3-hydroxybutyrate-co-3-hydroxypropionate-co-4-hydroxybutyrate-co-lactate). Homopolyesters like poly(3-hydroxybutyrate) are often highly crystalline and brittle, which limits some of their applications. The incorporation of 3HP monomers reduces the glass transition temperature, the crystallinity, and also, at up to 60 to 70 mol% 3HP, the melting point of the copolymer. This review provides a survey of the synthesis and physical properties of different polyesters containing 3HP.

Biodegradability of Poly(hydroxyalkanoate) Materials

Poly(hydroxyalkanoate) (PHA), which is produced from renewable carbon resources by many microorganisms, is an environmentally compatible polymeric material and can be processed into films and fibers. Biodegradation of PHA material occurs due to the action of extracellular PHA depolymerase secreted from microorganisms in various natural environments. A key step in determining the overall enzymatic or environmental degradation rate of PHA material is the degradation of PHA lamellar crystals in materials; hence, the degradation mechanism of PHA lamellar crystals has been studied in detail over the last two decades. In this review, the relationship between crystal structure and enzymatic degradation behavior, in particular degradation rates, of films and fibers for PHA is described.

Human anti-gold antibodies: biofunctionalization of gold nanoparticles and surfaces with anti-gold antibodies

The interface molecules designed to exhibit molecular recognitions between different species have become attractive tools for the bottom-up fabrication and hybridization of nanostructured units. Here, we focus on antibodies with high binding ability and specificity to construct a novel biomolecule interface for recognizing an inorganic material. Careful selection from a phage-displayed library of variable region heavy and light Fv chains of human antibodies using enzyme-linked immunosorbent assay and surface plasmon resonance assay resulted in the identification of an antibody fragment, A14P-b2, with high affinity (KD = 1.7 nm) and specificity for gold materials. Our results indicated the potential usefulness of human antibody libraries and the effectiveness of the antibody framework for recognizing bulk material surfaces. Construction of bivalent and bispecific antibodies on the A14P-b2 platform with high affinity by means of fusion technology enabled the functionalization of gold nanoparticles and allowed selective protein accumulation on gold spots patterned on a silicon substrate. This type of antibody engineering is potentially applicable to bio-inspired materials and nanobiosensing.

Enzymatic processes for biodegradation of poly(hydroxyalkanoate)s crystals

Poly(hydroxyalkanoate)s (PHAs) have attracted much attention as environmentally compatible polymeric materials that can be produced from renewable carbon resources. Biodegradation of PHA materials occurs by the function of extracellular PHA depolymerase secreted from microorganisms. Thus, elucidation of the enzymatic degradation mechanism for PHA materials is important to design PHA materials with desirable properties and controlled biodegradability. The solid PHA polymer is a water-insoluble substrate but PHA depolymerases are soluble in water. Therefore, the enzymatic degradation of PHA materials is a heterogeneous reaction on the material’s surface. Two distinct processes are involved during the degradation, namely, adsorption of the enzyme on the surface of PHA material and the subsequent hydrolysis of polymer chains. Atomic force microscopy (AFM) is a powerful tool that has been used for the quantitative analysis of PHA crystal degradation. AFM enables the characterization of the crystal surface nanostructure in a buffer solution. By using in-situ (real-time) AFM observations, we recently succeeded in observing the degradation processes of PHA crystals. Subsequently, we were also able to investigate the degradation rates of PHA crystals using the same technique. In this review, we have attempted to give an overview concerning the direct visualization of the adsorption, as well as the hydrolysis reactions of PHA depolymerases at the nanometer scale. In addition, we present other analytical techniques besides AFM as a complimentary approach to analyze the effect of enzyme adsorption on PHA crystals.Key words: poly(hydroxyalkanoate) (PHA), enzymatic degradation, lamellar crystal, PHA depolymerase.

Grafting of material-binding function into antibodies Functionalization by peptide grafting

Quite recently, a few antibodies against bulk material surface have been selected from a human repertoire antibody library, and they are attracting immense interest in the bottom-up integration of nanomaterials. Here, we constructed antibody fragments with binding affinity and specificity for nonbiological inorganic material surfaces by grafting material-binding peptides into loops of the complementarity determining region (CDR) of antibodies. Loops were replaced by peptides with affinity for zinc oxide and silver material surfaces. Selection of CDR loop for replacement was critical to the functionalization of the grafted fragments; the grafting of material-binding peptide into the CDR2 loop functionalized the antibody fragments with the same affinity and selectivity as the peptides used. Structural insight on the scaffold fragment used implies that material-binding peptide should be grafted onto the most exposed CDR loop on scaffold fragment. We show that the CDR-grafting technique leads to a build-up creation of the antibody with affinity for nonbiological materials.

Adsorption and Hydrolysis Reactions of Poly(hydroxybutyric acid) Depolymerases Secreted fromRalstoniapickettiiT1 andPenicilliumfuniculosumonto Poly[(R)-3-hydroxybutyric acid]

Reaction processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) with two types of poly(hydroxybutyric acid) (PHB) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum were characterized by means of atomic force microscopy (AFM) and quartz crystal microbalance (QCM). The PHB depolymerase from R. pickettii T1 consists of catalytic, linker, and substrate-binding domains, whereas the one from P. funiculosum lacks a substrate-binding domain. We succeeded in observing the adsorption of single molecules of the PHB depolymerase from R. pickettii T1 onto P(3HB) single crystals and the degradation of the single crystals in a phosphate buffer solution at 37 degrees C by real-time AFM. On the contrary, the enzyme molecule from P. funiculosum was hardly observed at the surface of P(3HB) single crystals by real-time AFM, even though the enzymatic degradation of the single crystals was surely progressed. On the basis of the AFM observations in air of the P(3HB) single crystals after the enzymatic treatments, however, not only the PHB depolymerase from R. pickettii T1 but also that from P. funiculosum adsorbed onto the surface of P(3HB) crystals, and both concentrations of the enzymes on the surface were nearly identical. This means both enzymes were adsorbed onto the surface of P(3HB) single crystals. Moreover, QCM measurements clarified quantitatively the differences in detachment behavior between two types of PHB depolymerases, namely the enzyme from R. pickettii T1 was hardly detached but the enzyme from P. funiculosum was released easily from the surface of P(3HB) crystals under an aqueous condition.

A human antibody fragment with high affinity for biodegradable polymer film

Antibodies with high affinity for the surface of a solid material would be advantageous in biomaterial science as a protein device. A human antibody fragment that binds to poly(hydroxybutyrate) (PHB), a biodegradable polymer matter, was generated by a phage display system. Clone PH7-3d3 was isolated after several rounds of selection and prepared as a fragment of immunoglobulin variable regions (Fv). The quartz crystal microbalance technique showed that PH7-3d3 Fv completely inhibited PHB enzymatic degradation by competing with PHB depolymerase. Kinetic analysis based on surface plasmon resonance demonstrated that PH7-3d3 Fv bound to the PHB film with an equilibrium dissociation constant of 14 nM. The three-dimensional structure of PH7-3d3 Fv was resolved to 1.7 A, revealing that the complementarity determining regions (CDRs) in the Fv fragment form a relatively flat surface on which uncharged polar and aromatic amino acids are distributed in clusters. The structure of PH7-3d3 Fv was similar to that of PHB depolymerase in the orientation of aromatic residues in the binding sites. Alanine scanning mutagenesis demonstrated that these aromatic residues, especially tryptophan residues in CDRs, were critical in the interaction between PH7-3d3 Fv and PHB. Our results suggest the possible selection of an antibody fragment that binds a material surface in a manner similar to protein-ligand interaction.