Assessment of the cytotoxicity of photocrosslinked dextran and hyaluronan-based hydrogels to vascular smooth muscle cells

The selection of photoinitiators for photopolymerization of biodegradable polymers and its application in digital light processing additive manufacturing

Digital light processing additive manufacturing (DLP-AM) technology has received a lot of attention in the field of biomedical engineering due to its high precision and customizability. However, some photoinitiators, as one of the key components in DLP-AM, may present toxicity and limit the application of DLP-AM toward biomedical applications. In order to gain further insights into the correlation between biocompatibility and photoinitiators in photoresins, a study on the selection of photoinitiators used in DLP-AM is conducted. The light absorbance range and cytocompatibility of four photoinitiators, vitamin B2 combined with triethanolamine (B2/TEOA), diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), 2-dimethoxy-2-phenylacetophenone (DMPA), and 2-hydroxy-4-(2-hydroxyethoxy)-2-methylpropiophenone (I2959), are characterized. Each photoinitiator is then combined with poly(glycerol sebacate) acrylate (PGSA) and poly(ε-caprolactone) diacrylate (PCLDA), to evaluate their miscibility and film formation ability through photopolymerization. The mechanical properties, in vitro and in vivo biocompatibility studies on bulk films are investigated. It is found that B2/TEOA and TPO exhibit a wider light absorbance range than I2959 and DMPA. PGSA films with B2/TEOA (PGSA-B2/TEOA) is capable of sustaining cell proliferation up to 10 days and showing low immune responses after 14 days post implantation, proving its biocompatibility. Although B2/TEOA requires longer photopolymerization time, the mechanical strength of PGSA-B2/TEOA is comparable to PGSA films with TPO and DMPA, and this combination is 3D-printable through DLP-AM at the rate of 100 s per layer. In summary, B2/TEOA is a promising photoinitiator for 3D printing.

Hyaluronic acid and chondroitin sulfate (meth)acrylate-based hydrogels for tissue engineering: Synthesis, characteristics and pre-clinical evaluation

Hydrogels based on photocrosslinkable Hyaluronic Acid Methacrylate (HAMA) and Chondroitin Sulfate Methacrylate (CSMA) are presently under investigation for tissue engineering applications. HAMA and CSMA gels offer tunable characteristics such as tailorable mechanical properties, swelling characteristics, and enzymatic degradability. This review gives an overview of the scientific literature published regarding the pre-clinical development of covalently crosslinked hydrogels that (partially) are based on HAMA and/or CSMA. Throughout the review, recommendations for the next steps in clinical translation of hydrogels based on HAMA or CSMA are made and potential pitfalls are defined. Specifically, a myriad of different synthetic routes to obtain polymerizable hyaluronic acid and chondroitin sulfate derivatives are described. The effects of important parameters such as degree of (meth)acrylation and molecular weight of the synthesized polymers on the formed hydrogels are discussed and useful analytical techniques for their characterization are summarized. Furthermore, the characteristics of the formed hydrogels including their enzymatic degradability are discussed. Finally, a summary of several recent applications of these hydrogels in applied fields such as cartilage and cardiac regeneration and advanced tissue modelling is presented.

Etoposide and olaparib polymer-coated nanoparticles within a bioadhesive sprayable hydrogel for post-surgical localised delivery to brain tumours

Glioblastoma is a malignant brain tumour with a median survival of 14.6 months from diagnosis. Despite maximal surgical resection and concurrent chemoradiotherapy, reoccurrence is inevitable. To try combating the disease at a stage of low residual tumour burden immediately post-surgery, we propose a localised drug delivery system comprising of a spray device, bioadhesive hydrogel (pectin) and drug nanocrystals coated with polylactic acid-polyethylene glycol (NCPPs), to be administered directly into brain parenchyma adjacent to the surgical cavity. We have repurposed pectin for use within the brain, showing in vitro and in vivo biocompatibility, bio-adhesion to mammalian brain and gelling at physiological brain calcium concentrations. Etoposide and olaparib NCPPs with high drug loading have shown in vitro stability and drug release over 120 h. Pluronic F127 stabilised NCPPs to ensure successful spraying, as determined by dynamic light scattering and transmission electron microscopy. Successful delivery of Cy5-labelled NCPPs was demonstrated in a large ex vivo mammalian brain, with NCPP present in the tissue surrounding the resection cavity. Our data collectively demonstrates the pre-clinical development of a novel localised delivery device based on a sprayable hydrogel containing therapeutic NCPPs, amenable for translation to intracranial surgical resection models for the treatment of malignant brain tumours.

3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity

In bone regenerative medicine there is a need for suitable bone substitutes. Hydrogels have excellent biocompatible and biodegradable characteristics, but their visco-elastic properties limit their applicability, especially with respect to 3D bioprinting. In this study, we modified the naturally occurring extracellular matrix glycosaminoglycan hyaluronic acid (HA), in order to yield photo-crosslinkable hydrogels with increased mechanical stiffness and long-term stability, and with minimal decrease in cytocompatibility. Application of these tailor-made methacrylated hyaluronic acid (MeHA) gels for bone tissue engineering and 3D bioprinting was the subject of investigation. Visco-elastic properties of MeHA gels, measured by rheology and dynamic mechanical analysis, showed that irradiation of the hydrogels with UV light led to increased storage moduli and elastic moduli, indicating increasing gel rigidity. Subsequently, human bone marrow derived mesenchymal stromal cells (MSCs) were incorporated into MeHA hydrogels, and cell viability remained 64.4% after 21 days of culture. Osteogenic differentiation of MSCs occurred spontaneously in hydrogels with high concentrations of MeHA polymer, in absence of additional osteogenic stimuli. Addition of bone morphogenetic protein-2 (BMP-2) to the culture medium further increased osteogenic differentiation, as evidenced by increased matrix mineralisation. MeHA hydrogels demonstrated to be suitable for 3D bioprinting, and were printed into porous and anatomically shaped scaffolds. Taken together, photosensitive MeHA-based hydrogels fulfilled our criteria for cellular bioprinted bone constructs within a narrow window of concentration.

An enzyme-mediated in situ hydrogel based on polyaspartamide derivatives for localized drug delivery and 3D scaffolds

An enzyme-mediated in situ hydrogel based on polyaspartamide derivatives is prepared for localized drug delivery and 3D scaffolds.

Poly (3-hydroxyalkanoates)-co-(6-hydroxyhexanoate) hydrogel promotes angiogenesis and collagen deposition during cutaneous wound healing in rats

Wound management and healing in several physiological or pathological conditions, particularly when comorbidities are involved, usually proves to be difficult. This presents complications leading to socio-economic and public health burdens. The accelerative wound healing potential of biocompatible poly(3-hydroxyalkanoates)-co-(6-hydroxyhexanoate) (PHA-PCL) composite hydrogel is reported herein. The biosynthesized PHA-PCL macromer was cross-linked with PEGMA to give a hydrogel. Twenty-four rats weighing 200-250 g each were randomly assigned to four groups of six rats. Rats in group I (negative control) were dressed with sterilized gum acacia paste in 10% normal saline while PEGMA-alone hydrogel (PH) was used to dress group II (secondary control) rats. Group III rats were dressed with PHAs-PCL cross-linked PEGMA hydrogel (PPH). For the positive control (group IV), the rats were dressed with Intrasite(®) gel. Biochemical, histomorphometric and immunohistomorphometric analyses revealed a significant difference in area closure and re-epithelialization on days 7 and 14 in PPH or Intrasite(®) gel groups compared to gum acacia or PEGMA-alone groups. Furthermore, wounds dressed with PPH or Intrasite(®) gel showed evident collagen deposition, enhanced fibrosis and extensively organized angiogenesis on day 14 compared to the negative control group. While improvement in wound healing of the PH dressed group could be observed, there was no significant difference between the negative control group and the PH dressed group in any of the tests. The findings suggested that topical application of PPH accelerated the rats' wound healing process by improving angiogenesis attributed to the increased microvessel density (MVD) and expressions of VEGF-A in tissue samples. Thus, PPH has been demonstrated to be effective in the treatment of cutaneous wounds in rats, and could be a potential novel agent in the management and acceleration of wound healing in humans and animals.

Comparative study on temperature/pH sensitive xylan-based hydrogels: their properties and drug controlled release

Temperature/pH dual-responsive hydrogels as a new intestinal-targeted carriers were prepared by the grafting copolymerization of xylan possessing different functional groups with AM and NIPAm via ultraviolet irradiation.

Thermosensitive hydrogels of poly(methyl vinyl ether-co-maleic anhydride) - Pluronic(®) F127 copolymers for controlled protein release

Thermosensitive hydrogels are of a great interest due to their many biomedical and pharmaceutical applications. In this study, we synthesized a new series of random poly (methyl vinyl ether-co-maleic anhydride) (Gantrez(®) AN, GZ) and Pluronic(®) F127 (PF127) copolymers (GZ-PF127), that formed thermosensitive hydrogels whose gelation temperature and mechanical properties could be controlled by the molar ratio of GZ and PF127 polymers and the copolymer concentration in water. Gelation temperatures tended to decrease when the GZm/PF127 ratio increased. Thus, at a fixed GZm/PF127 value, sol-gel temperatures decreased at higher copolymer concentrations. Moreover, these hydrogels controlled the release of proteins such as bovine serum albumin (BSA) and recombinant recombinant kinetoplastid membrane protein of Leishmania (rKMP-11) more than the PF127 system. Toxicity studies carried out in J774.2 macrophages showed that cell viability was higher than 80%. Finally, histopathological analysis revealed that subcutaneous administration of low volumes of these hydrogels elicited a tolerable inflammatory response that could be useful to induce immune responses against the protein cargo in the development of vaccine adjuvants.

Concentration gradient generation of multiple chemicals using spatially controlled self-assembly of particles in microchannels

We present a robust microfluidic platform for the stable generation of multiple chemical gradients simultaneously using in situ self-assembly of particles in microchannels. This proposed device enables us to generate stable and reproducible diffusion-based gradients rapidly without convection flow: gradients are stabilized within 5 min and are maintained steady for several hours. Using this device, we demonstrate the dynamic position control of bacteria by introducing the sequential directional change of chemical gradients. Green Fluorescent Protein (GFP)-expressing bacterial cells, allowing quantitative monitoring, show not only tracking motion according to the directional control of chemical gradients, but also the gradual loss of sensitivity when exposed to the sequential attractants because of receptor saturation. In addition, the proposed system can be used to study the preferential chemotaxis assay of bacteria toward multiple chemical sources, since it is possible to produce multiple chemical gradients in the main chamber; aspartate induces the most preferential chemotaxis over galactose and ribose. The microfluidic device can be easily fabricated with a simple and cost effective process based on capillary pressure and evaporation for particle assembly. The assembled particles create uniform porous membranes in microchannels and its porosity can be easily controlled with different size particles. Moreover, the membrane is biocompatible and more robust than hydrogel-based porous membranes. The proposed system is expected to be a useful tool for the characterization of bacterial responses to various chemical sources, screening of bacterial cells, synthetic biology and understanding many cellular activities.

Design of biomimetic cell-interactive substrates using hyaluronic acid hydrogels with tunable mechanical properties

Hyaluronic acid (HA) is a natural polysaccharide abundant in biological tissues with excellent potential for constructing synthetic extracellular matrix analogues. In this work, we established a simple and dependable approach to prepare hyaluronic acid-based hydrogels with controlled stiffness and cell recognition properties for use as cell-interactive substrates. This approach relied on a new procedure for the synthesis of methacrylate-modified HA macromers (HA-MA) and, on photorheometry allowing real time monitoring of gelation during photopolymerization. We showed in this way the ability to obtain gels that encompass the range of physiologically relevant elastic moduli while still maintaining the recognition properties of HA by specific cell surface receptors. These hydrogels were prepared from HA macromers having a degree of methacrylation <0.5, which allows to minimize compromising effects on the binding affinity of HA to its cell receptors due to high substitution on the one hand, and to achieve nearly 100% conversion of the methacrylate groups on the other. When the HA hydrogels were immobilized on glass substrates, it was observed that the attachment and the spreading of a variety of mammalian cells rely on CD44 and its coreceptor RHAMM. The attachment and spreading were also shown to be modulated by the elastic properties of the HA matrix. All together, these results highlight the biological potential of these HA hydrogel systems and the needs of controlling their chemical and physical properties for applications in cell culture and tissue engineering.

Development of a biostable replacement for PEGDA hydrogels

The exceptional tunability of poly(ethylene glycol) (PEG) hydrogel chemical, mechanical, and biological properties enables their successful use in a wide range of biomedical applications. Although PEG diacrylate (PEGDA) hydrogels are often used as nondegradable controls in short-term in vitro studies, it is widely acknowledged that the hydrolytically labile esters formed upon acrylation of the PEG diol make them susceptible to slow degradation in vivo. A PEG hydrogel system that maintains the desirable properties of PEGDA while improving biostability would be valuable in preventing degradation-related failure of gel-based devices in long-term in vivo applications. To this end, PEG diacrylamide (PEGDAA) hydrogels were synthesized and characterized in quantitative comparison to traditional PEGDA hydrogels. It was found that PEGDAA hydrogel modulus and swelling can be tuned over a similar range and to comparable degrees as PEGDA hydrogels with changes in macromer molecular weight and concentration. Additionally, PEGDAA cytocompatibility, low cell adhesion, and capacity for incorporation of bioactivity were analogous to that of PEGDA. In vitro hydrolytic degradation studies showed that the amide-based PEGDAA had significantly increased biostability relative to PEGDA. Overall, these findings indicate that PEGDAA hydrogels are a suitable replacement for PEGDA hydrogels with enhanced hydrolytic resistance. In addition, these studies provide a quantitative measure of the hydrolytic degradation rate of PEGDA hydrogels which was previously lacking in the literature.

A gelatin-g-poly(N-isopropylacrylamide) biodegradable in situ gelling delivery system for the intracameral administration of pilocarpine

In this study, the aminated gelatin was grafted with carboxylic end-capped poly(N-isopropylacrylamide) (PN) via a carbodiimide-mediated coupling reaction to fabricate biodegradable in situ forming delivery systems for intracameral administration of antiglaucoma medications. The chemical structure of the graft copolymers (GN) was confirmed by Fourier transform infrared (FTIR) spectroscopy. When the feed molar ratio of NH(2)/COOH was 0.36, the grafting ratio, efficiency and degree of grafting, and weight ratio of PN to aminated gelatin was 25.6, 18.6%, 52.6%, and 1.9, respectively. As compared to PN, the GN samples possessed better thermal gelation ability and adherence, indicating remarkable phase transition properties. Under gelatinase degradation, the remaining weight of GN was significantly lower than those of PN at each time point from 8 h to 4 weeks. Cytocompatibility studies showed that the culture of anterior segment cells with both in situ forming gels does not affect proliferation and has little effect on inflammation. Higher encapsulation efficiency (~62%) and cumulative release (~95%) were achieved for GN vehicles, which was attributed to initial fast temperature triggered capture of pilocarpine and subsequent progressive degradation of gelatin network. In a rabbit glaucoma model, the performance of delivery carriers was evaluated by biomicroscopy, intraocular pressure (IOP), and pupil size change. Intracameral administration of pilocarpine using GN was found to be more effective than other methods such as instillation of eye drop and injection of free drug or PN containing drug in improving ocular bioavailability and extending the pharmacological responses (i.e., miosis and IOP lowering effect and preservation of corneal endothelial cell density).

Hyaluronic acid hydrogels for biomedical applications

Hyaluronic acid (HA), an immunoneutral polysaccharide that is ubiquitous in the human body, is crucial for many cellular and tissue functions and has been in clinical use for over thirty years. When chemically modified, HA can be transformed into many physical forms-viscoelastic solutions, soft or stiff hydrogels, electrospun fibers, non-woven meshes, macroporous and fibrillar sponges, flexible sheets, and nanoparticulate fluids-for use in a range of preclinical and clinical settings. Many of these forms are derived from the chemical crosslinking of pendant reactive groups by addition/condensation chemistry or by radical polymerization. Clinical products for cell therapy and regenerative medicine require crosslinking chemistry that is compatible with the encapsulation of cells and injection into tissues. Moreover, an injectable clinical biomaterial must meet marketing, regulatory, and financial constraints to provide affordable products that can be approved, deployed to the clinic, and used by physicians. Many HA-derived hydrogels meet these criteria, and can deliver cells and therapeutic agents for tissue repair and regeneration. This progress report covers both basic concepts and recent advances in the development of HA-based hydrogels for biomedical applications.

Characterization of glycidyl methacrylate - crosslinked hyaluronan hydrogel scaffolds incorporating elastogenic hyaluronan oligomers

Prior studies on two-dimensional cell cultures suggest that hyaluronic acid (HA) stimulates cell-mediated regeneration of extracellular matrix structures, specifically those containing elastin, though such biologic effects are dependent on HA fragment size. Towards being able to regenerate three-dimensional (3-D) elastic tissue constructs, the present paper studies photo-crosslinked hydrogels containing glycidyl methacrylate (GM)-derivatized bio-inert high molecular weight (HMW) HA (1 × 10(6)Da) and a bioactive HA oligomer mixture (HA-o: MW ∼0.75 kDa). The mechanical (rheology, degradation) and physical (apparent crosslinking density, swelling ratio) properties of the gels varied as a function of incorporated HA oligomer content; however, overall, the mechanics of these hydrogels were too weak for vascular applications as stand-alone materials. Upon in vivo subcutaneous implantation, only a few inflammatory cells were evident around GM-HA gels, however their number increased as HA-o content within the gels increased, and the collagen I distribution was uniform. Smooth muscle cells (SMC) were encapsulated into GM hydrogels, and calcein acetoxymethyl detection revealed that the cells were able to endure twofold the level of UV exposure used to crosslink the gels. After 21 days of culture, SMC elastin production, measured by immunofluorescence quantification, showed HA-o to increase cellular deposition of elastic matrix twofold relative to HA-o-free GM-HA gels. These results demonstrate that cell response to HA/HA-o is not altered by their methacrylation and photo-crosslinking into a hydrogel, and that HA-o incorporation into cell-encapsulating hydrogel scaffolds can be useful for enhancing their production of elastic matrix structures in a 3-D space, important for regenerating elastic tissues.

Hyaluronic acid hydrogels with controlled degradation properties for oriented bone regeneration

Non-healing fractures can result from trauma, disease, or age-related bone loss. While many treatments focus on restoring bone volume, few try to recapitulate bone organization. However, the native architecture of bone is optimized to provide its necessary mechanical properties. Hyaluronic acid (HA) hydrogel scaffold systems with tunable degradation properties were developed for the controlled delivery of osteoinductive and angiogenic growth factors, thus affecting the quantity and quality of regenerated tissue. HA hydrogels were designed to degrade at fast, intermediate, and slow rates due to hydrolysis and further provided controlled release of cationic proteins due to electrostatic interactions. Scaffolds delivering bone morphogenetic protein-2 (BMP-2) were evaluated in a rat calvarial bone critical size defect model. BMP-2 delivery from the HA hydrogels had a clear osteoinductive effect in vivo and, for all hydrogel types, BMP-2 delivery resulted in significant mineralization compared to control hydrogels. The temporal progression of this effect could be modulated by altering the degradation rate of the scaffold. All three degradation rates tested resulted in similar amounts of mineral formation at the latest (six week) time point examined. Interestingly, however, the fastest and slowest degrading scaffolds seemed to result in more organized bone than the intermediate degrading scaffold, which was designed to degrade in 6-8 weeks to match the healing time. Additionally, healing could be enhanced by co-delivery of vascular endothelial growth factor along with BMP-2.

The effect of hyaluronic Acid on the invasiveness of malignant glioma cells : comparison of invasion potential at hyaluronic Acid hydrogel and matrigel

OBJECTIVE

Hyaluronidase (HAse), a degrading enzyme of hyaluronic acid (HA), is highly expressed in patients with malignant glioma. The purpose of this study was to verify whether HAse is related to the invasion of glioma cells. We also investigated if glioma cells with higher mobility in 2-dimensioal (2-D) method have also higher mobility at 3-dimensional (3-D) environment.

METHODS

Malignant glioma cell lines (U87MG, U251MG, U343MG-A, and U373MG) were used, and their HAse expressions were evaluated by HA zymography. The migration ability was evaluated by simple scratch technique. The invasiveness of each cell lines was evaluated by Matrigel invasion assay and HA hydrogel invasion assay. In HA hydrogel invasion assay, colonies larger than 150 microm were regarded as positive ones and counted. Statistical analysis of migration ability and invasion properties of each cell lines was performed using t-test.

RESULTS

In scratch test to examine migration ability of each cell lines, U87MG cells were most motile than others, and U343MG-A least motile. The HAse was expressed in U251MG and U343MG-A cell lines. However, U87MG and U373MG cell lines did not express HAse activity. In Matrigel invasion assay, the cell lines expressing HAse (U251MG and U343MG-A) were more invasive in the presence of HA than HAse deficient cell lines (U87MG and U373MG). In HA hydrogel invasion assay, the HAse-expressing cell lines formed colonies more invasively than HAse-deficient ones.

CONCLUSION

Malignant Glioma cells expressing HAse were more invasive than HAse-deficient ones in 3-dimensional environment. Therefore, it might be suggested that invasion of malignant gliomas is suppressed by inhibition of HAse expression or HA secretion. Additionally, the ability of 2-D migration and 3-D invasion might not be always coincident to each other in malignant glioma cells.

Final report of the safety assessment of hyaluronic acid, potassium hyaluronate, and sodium hyaluronate

Hyaluronic acid, sodium hyaluronate, and potassium hyaluronate function in cosmetics as skin conditioning agents at concentrations up to 2%. Hyaluronic acid, primarily obtained from bacterial fermentation and rooster combs, does penetrate to the dermis. Hyaluronic acid was not toxic in a wide range of acute animal toxicity studies, over several species and with different exposure routes. Hyaluronic acid was not immunogenic, nor was it a sensitizer in animal studies. Hyaluronic acid was not a reproductive or developmental toxicant. Hyaluronic acid was not genotoxic. Hyaluronic acid likely does not play a causal role in cancer metastasis; rather, increased expression of hyaluronic acid genes may be a consequence of metastatic growth. Widespread clinical use of hyaluronic acid, primarily by injection, has been free of significant adverse reactions. Hyaluronic acid and its sodium and potassium salts are considered safe for use in cosmetics as described in the safety assessment.

Development of photocrosslinked sialic acid containing polymers for use in Abeta toxicity attenuation

beta-Amyloid peptide (Abeta), the primary protein component in senile plaques associated with Alzheimer's disease (AD), has been implicated in neurotoxicity associated with AD. Previous studies have shown that the Abeta-neuronal membrane interaction plays a crucial role in Abeta toxicity. More specifically, it is thought that Abeta interacts with ganglioside rich and sialic acid rich regions of cell surfaces. In light of such evidence, we have hypothesized that the Abeta-membrane sialic acid interaction could be inhibited through use of a biomimic multivalent sialic acid compound that would compete with the cell surface for Abeta binding. To explore this hypothesis, we synthesized a series of photocrosslinked sialic acid containing oligosaccharides and tested their ability to bind Abeta and attenuate Abeta toxicity in cell culture assays. We show that a polymer prepared via the photocrosslinking of disialyllacto-N-tetraose (DSLNT) was able to attenuate Abeta toxicity at low micromolar concentrations without adversely affecting the cell viability. Polymers prepared from mono-sialyl-oligosaccharides were less effective at Abeta toxicity attenuation. These results demonstrate the feasibility of using photocrosslinked sialyl-oligosaccharides for prevention of Abeta toxicity in vitro and may provide insight into the design of new materials for use in attenuation of Abeta toxicity associated with AD.

Benzocyclobutene (BCB) based neural implants with microfluidic channel

Benzocyclobutene (BCB) based intracortical neural implants for basic neuroscience research in animal models was fabricated, in which microfluidic channel was embedded to deliver chemical reagents. BCB presents several attractive features for chronic applications: flexibility, biocompatibility, desirable chemical and electrical properties, and can be easily manufactured using existing batch microfabrication technology; The fabricated implants have single shank with three recording sites (20 x 20 microm) and two reservoirs (inlet and outlet). The channel had large volume (40 microm width and 10 microm height), and hydrophobic surface to provide a high degree of chemical inertness. All the recording sites were positioned near the end of the shank in order to increase the probability of recording neural signals from a target volume of tissue. In vitro biocompatibility tests of fabricated implants revealed no adverse toxic effects on cultured cells. The implant with a 5 microm silicon backbone layer penetrated rat's pia without buckling, a major drawback of polymer alone. The averaged impedance value at 1 kHz was approximately 1.2 MOmega. Water flowing through the channel was observed. Depending on the amount of the driving pressure from the syringes, the delivery speed of the water was totally controlled.

Rheological characterization of in situ crosslinkable hydrogels formulated from oxidized dextran and N-carboxyethyl chitosan

The gelation kinetics of an in situ gelable hydrogel formulated from oxidized dextran (Odex) and N-carboxyethyl chitosan (CEC) was investigated rheologically. Both Schiff base mediated chemical and physical crosslinking account for its rapid gelation (30-600 s) between 5 and 37 degrees C. The correlation between gelation kinetics and hydrogel properties with Odex/CEC concentration, their feed ratio, and temperature were elucidated. The gelation time determined from crossing over of storage moduli (G') and loss moduli (G' ') was in good agreement with that deduced from frequency sweeping tests according to the Winter-Chambon power law. The power law exponents for a 2% (w/v) Odex/CEC solution (ratio 5:5) at the gel point was 0.61, which is in excellent agreement with the value predicted from percolation theory (2/3). Temperature dependence of gelation time for the same hydrogel formulation is well-described by an Arrhenius plot with its apparent activation energy calculated at 51.9 kJ/mol.

Novel glycidyl methacrylated dextran (Dex-GMA)/gelatin hydrogel scaffolds containing microspheres loaded with bone morphogenetic proteins: Formulation and characteristics

Novel thermomechanical hydrogel scaffolds containing our previously prepared microspheres loaded with bone morphogenetic proteins (BMP) were successfully generated by radical crosslinking and low dose gamma-irradiation from combination of two kind of biomaterials: glycidyl methacrylated dextran (Dex-GMA) and gelatin. The structure of those resulting smart hybrid hydrogels was evaluated by mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) analyses, and as a function of the degree of Dex-GMA's substitution (DS), the proportion between Dex-GMA and gelatin, and the initial polyethyleneglycol (PEG) concentration used in the preparation of the hydrogels. The swelling and degradation properties and the temperature-sensitive drug release manner were determined by dynamic evaluation methods in vitro, and the gel content was also calculated. MIP analysis showed that by systematically altering the preparation parameters, the overall networks were clearly macroporous with pore sizes ranging from 5.6+/-4.2 to 37.7+/-13.7 microm. As expected, the pore size decreased as DS and initial PEG concentration increased, whereas the opposite was found for the gel content. Moreover, the porosity values ranged from 73.7+/-12.4% up to 89.6+/-6.3%. The SEM results also showed the inter-connective pores as well as microspheres encased into their porous structure of those hydrogels. The swelling and degradation properties of the resultant hydrogels varied according to the DS of Dex-GMA and initial PEG concentration, while the proportion between Dex-GMA and gelatin had no significant influence on those characterizations. By changing the composition ratio of the two precursors, the phase transition temperature (lower critical solution temperature, LSCT) of the hydrogel scaffolds could also be adjusted to be or near the body temperature, so BMP release from microsphere-hydrogel compounds could be accordingly controlled and the release period could be varied from 18 to more than 28 days. These results demonstrated that a novel temperature-sensitive and biodegradable Dex-GMA/gelatin scaffold containing microspheres loaded with BMP could be successfully developed from both dextran- and gelatin-based biomaterials, which could promisingly satisfy the need, desire, and expectation of both self-regulated drug delivery and tissue-engineering applications.

Molecularly engineered hydrogels for implant biocompatibility

The biocompatibility of biosmart polymer membranes synthesized from cross-linkable (2-hydroxyethyl methacrylate) (HEMA) and tetraethylene glycol diacrylate and containing different mole-percent polyethylene glycol methacrylate (PEGMA) and methacryloyloxyethyl phosphorylcholine (MPC), a phosphorylcholine-containing co-monomer, was investigated. The cytotoxicity (cell viability and proliferation) and the adhesion of extra cellular matrix proteins to these hydrogel surfaces were separately tested. Cell proliferation assays were conducted by cultivating human skeletal muscle fibroblasts onto the surfaces of these polymeric membranes prepared by in-situ polymerization in chemically derivatized 8-well cell-culture plates. The compositions containing MPC and PEGMA concentrations greater than 1.0 and 0.05 mole% respectively demonstrated good protein adhesion and cell viability (>90%) of human muscle fibroblast cells. Morphological deviances and partial colonization of the hydrogel surface has been noticed and suggests good compatibility of hydrogels for cellular viability but restricted proliferation. It is well known that the adsorption of proteins onto biomaterial surfaces modulates the cellular interaction with these surfaces. The extent of adsorption of fluorescein labeled proteins (laminin, collagen, and fibronectin) onto these polymer membrane surfaces was evaluated by measuring the resultant fluorescence intensity using a confocal fluorescence scanner.

Human endothelial progenitor cell attachment to polysaccharide-based hydrogels: a pre-requisite for vascular tissue engineering

A hydrogel was prepared from polysaccharides (pullulan/dextran/fucoidan) and evaluated as a novel biomaterial for Endothelial Progenitor Cell (EPC) culture. Using a cross-linking process with sodium trimetaphosphate in aqueous solution, homogeneous, transparent and easy to handle gels were obtained with a water content higher than 90%. Circular scaffolds (6 mm diameter and 2 mm thickness discs) were used for cell culture. Different types of EPCs were used: CD34+ derived ECs from cord blood and two sorts of CD133+ derived ECs from human bone marrow, old (30 days) and young (4 days) cells. EPCs were characterised as endothelial cells by immunofluorescent stainings for CD31 and Dil-Ac-LDL. CD133+ derived ECs from bone marrow were characterized by RT-PCR for CD31, VE-cadherin and KDR. HSVECs (Human Saphenous Vein Endothelial Cells) were used as control cells. We evaluated whether different kinds of EPCs could adhere on this novel hydrogel 4 h and 24 h after seeding, by a colorimetric quantitative test. EPCs adhered to hydrogels in serum- free conditions with values being over than 80% for young CD133+ cells at 4 h and 24 h. This pullulan-based hydrogel could constitute a suitable support for vascular cell adhesion as a pre-requisite for vascular tissue engineering.

Pullulan-based hydrogel for smooth muscle cell culture

A hydrogel was prepared from pullulan and evaluated as a novel biomaterial for vascular engineering. Using a crosslinking process with sodium trimetaphosphate in aqueous solution, homogeneous, transparent, and easy-to-handle pullulan gels were obtained with water-content higher than 90%. A circular punch was used to cut 6-mm diameter and 2-mm thickness discs for cell culture. Environmental scanning electron microscopy analysis of hydrated gels revealed a smooth surface, on which rabbit vascular smooth muscle cells were successfully seeded. The absence of cytotoxicity was evidenced by a live/dead assay. Fluorescence-labeled cells were observed adhering and progressively spreading out on the surface of the material. Cellular proliferation was followed for up to 1 week using an MTT assay. In addition, a complete in vitro degradation of the gels was achieved in 3 h upon incubation in a pullulanase solution (44 U/mL). In conclusion, we have shown the feasibility of preparing a biocompatible pullulan-based hydrogel that could support vascular cell culture. Based on these promising results, future studies will focus on the seeding of vascular cells on tubular-shaped hydrogels and the in vivo implantation of these new biomaterials.

Synthesis of cell-adhesive dextran hydrogels and macroporous scaffolds

Dextran hydrogels have been previously investigated as drug delivery vehicles and more recently as macroporous scaffolds; however, the non-cell-adhesive nature of dextran has limited its utility for tissue engineering. To overcome this limitation, macroporous scaffolds of methacrylated dextran (Dex-MA) copolymerized with aminoethyl methacrylate (AEMA) were synthesized, thereby introducing primary amine groups for covalent immobilization of extracellular-matrix-derived peptides. The amino group density for hydrogels copolymerized with 0.5 wt% AEMA was found to be 36.1+/-0.4 micromol/cm(3) by elemental analysis. To further enhance cellular interaction, poly(Dex-MA-co-AEMA) hydrogels were modified with either CRGDS or a mixture of CDPGYIGSR and CQAASIKVAV (1:1, v/v) using sulfo-(N-maleimidomethyl)cyclohexane-1-carboxylate (sulfo-SMCC). The immobilized peptide concentration was determined using amino acid analysis at: 2.6+/-0.9 micromol/cm(3) for CRGDS-derived hydrogels and 2.2+/-0.3 micromol/cm(3) plus 1.9+/-0.2 micromol/cm(3) for CDPGYIGSR plus CQAASIKVAV-derived hydrogels, respectively. Cellular interactions of primary embryonic chick dorsal root ganglia (DRGs) were compared on the hydrogels. Cell adhesion and neurite outgrowth on poly(Dex-MA) increased with copolymerization of AEMA and further improved with peptide modification and significantly for CDPGYIGSR/CQAASIKVAV-derived poly(Dex-MA-co-AEMA) hydrogels. Moreover, DRGs penetrated within the first 600 microm of the scaffolds, thereby demonstrating the potential of this scaffold for guided cell and axonal regeneration in vivo.

Effect of Charge and Molecular Weight on the Functionality of Gelatin Carriers for Corneal Endothelial Cell Therapy

Cell transplantation strategies usually involve the use of supporting carrier materials because of the soft and fragile nature of these grafts. In this work, a cell-adhesive gelatin hydrogel carrier was fabricated to deliver cultivated human corneal endothelial cell (HCEC) sheets, which were harvested from thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted culture surfaces. The carrier disks, consisting of gelatins with a different isoelectric point (IEP = 5.0 and 9.0) and a molecular weight (MW) ranging from 3 to 100 kDa, were subjected to 16.6 kGy gamma irradiation for sterilization. The effect of IEP and MW of the raw gelatins (i.e., before irradiation) on the functionality of sterilized disks was studied by determinations of mechanical property, water content, dissolution degree, and cytocompatibility. Irrespective of the IEP of raw gelatin, hydrogel disks prepared with high MW (100 kDa) exhibited a greater tensile strength, lower water content, and slower dissolution rate than those made of low MW gelatin (8 and 3 kDa). From the investigation of cellular responses to the disks, the negatively charged gelatin (IEP = 5.0) groups were more cytocompatible when compared with their positively charged counterparts (IEP = 9.0) at the same MW (100 kDa). Additionally, in the negatively charged gelatin groups, only a slight increase in pro-inflammatory cytokine expression was observed with increasing MW of gelatin from 3 to 100 kDa. It is concluded that the gamma-sterilized hydrogel disks made from raw gelatins (IEP = 5.0, MW = 100 kDa) with appropriate dissolution degree and acceptable cytocompatibility are capable of providing stable mechanical support, making these carriers promising candidates for intraocular delivery of cultivated HCEC sheets.

Macroporous interconnected dextran scaffolds of controlled porosity for tissue-engineering applications

Dextran hydrogels have been studied as drug delivery vehicles but not as scaffolds for tissue-engineering likely because previously synthesized dextran hydrogels had pores too small for cell penetration. Our goal was to create macroporous, interconnected dextran scaffolds. To this end, we took advantage of the liquid-liquid immiscibility of poly(ethylene glycol) and methacrylated dextran during radical crosslinking of the methacrylated moieties. By controlling the degree of methacrylate substitution on dextran, dextran molar mass and PEG concentration, macroporous hydrogels were created. The presence of PEG in solution had a significant effect on the final morphology of the dextran hydrogel leading to the formation of different types of structures, from microporous gel to macroporous gel-wall to a macroporous interconnected-beaded structure. A series of formulation diagrams were prepared which allowed us to determine which conditions led to the formation of macroporous interconnected-beaded scaffolds. Dextran macroporous interconnected-beaded gels had a high water content, between 89% and 94%, a homogeneous morphology, determined by scanning electron microscopy, with interconnected macroporous pores, as determined by protein diffusivity where the effective diffusion coefficients of BSA were calculated to be 3.1 x 10(-7)cm2/s for Dex-MA 40 kDa DS 5 and 1 x 10(-7)cm2/s for Dex-MA 6 kDa DS10, which are similar to that of BSA in water, 5.9 x 10(-7)cm2/s. Mercury intrusion porosimetry showed that the macroporous interconnected-beaded scaffolds had a bimodal distribution of macropores, with a median diameter of 41 microm, interconnected by throats, which had a median diameter of 11 microm. Together, these data suggest that the dextran scaffolds will be advantageous in applications that require an interconnected macroporous geometry, such as those of tissue engineering where cell penetration and nutrient diffusion are necessary for tissue regeneration.

Reticulated hyaluronan hydrogels: a model for examining cancer cell invasion in 3D

The extracellular polysaccharide hyaluronan (HA) controls cell migration, differentiation and proliferation, and contributes to the invasiveness of human cancers. The roles of HA cell surface receptors and hyaluronidases (HAses) in this process are still controversial. In order to investigate their involvement in cancer pathogenesis, we developed a reticulated HA hydrogel, a three-dimensional matrix in which cells can invade and grow. We have studied thirteen cell lines, from primary tumors or metastases, that migrated into the HA hydrogel and proliferated giving rise to clusters and colonies. The number of colonies, which reflects tumor cell invasiveness, ranged from 7 to 193 after 5 days of culture. Invasion was dependent on the production of HAse as well as other factors. Optimal colonization occurred when cells released HAse, lacked HA-binding sites and did not secrete HA. Moreover, we describe for the first time a HAse activity at physiological pH that may be responding to the confinement of the enzyme in a three-dimensional structure. We show here that this reticulated matrix provides a three-dimensional model for investigating mechanisms involved in malignant invasion.

Biocompatible benzocyclobutene (BCB)-based neural implants with micro-fluidic channel

Poly-benzocyclobutene (BCB)-based intracortical neural implant was fabricated, in which micro-fluidic channel was embedded to deliver drug solutions. BCB presents several attractive features for chronic applications: flexibility, biocompatibility, desirable chemical and electrical properties, and can be easily manufactured using existing batch micro-fabrication technology. The fabricated implants have single shank with three recording sites (20 microm x 20 microm) and two reserviors (inlet and outlet). The channel had large volume (40 microm width and 10 microm height), and hydrophobic surface to provide a high degree of chemical inertness. All the recording sites were positioned near the end of the shank in order to increase the probability of recording neural signals from a target volume of tissue. In vitro cytotoxicity tests of prototype implants revealed no adverse toxic effects on cultured cells. The implant with a silicon backbone layer of 5-10 microm was robust enough to penetrate rat's pia without buckling, a major drawback of polymer alone. The averaged impedance value at 1 KHz was approximately 1.2 MOmega. Simultaneous recordings of neural signals from barrel cortex of a rat were successfully demonstrated.

In situ crosslinkable hyaluronan hydrogels for tissue engineering

We describe the development of an injectable, cell-containing hydrogel that supports cell proliferation and growth to permit in vivo engineering of new tissues. Two thiolated hyaluronan (HA) derivatives were coupled to four alpha,beta-unsaturated ester and amide derivatives of poly(ethylene glycol) (PEG) 3400. The relative chemical reactivity with cysteine decreased in the order PEG-diacrylate (PEGDA)>>PEG-dimethacrylate>PEG-diacrylamide>PEG-dimethacrylamide. The 3-thiopropanoyl hydrazide derivative (HA-DTPH) was more reactive than the 4-thiobutanoyl hydrazide, HA-DTBH. The crosslinking of HA-DTPH with PEGDA in a molar ratio of 2:1 occurred in approximately 9 min, suitable for an in situ crosslinking applications. The in vitro cytocompatibility and in vivo biocompatibility were evaluated using T31 human tracheal scar fibroblasts, which were suspended in medium in HA-DTPH prior to addition of the PEGDA solution. The majority of cells survived crosslinking and the cell density increased tenfold during the 4-week culture period in vitro. Cell-loaded hydrogels were also implanted subcutaneously in the flanks of nude mice, and after immunohistochemistry showed that the encapsulated cells retained the fibroblast phenotype and secreted extracellular matrix in vivo. These results confirm the potential utility of the HA-DTPH-PEGDA hydrogel as an in situ crosslinkable, injectable material for tissue engineering.

Optimization and Characterization of Dextran Membranes Prepared by Electrospinning

Dextran is soluble in both water and organic solvents, so it could be a versatile biomacromolecule for preparing nanofibrous electrospun membranes by blending with either water-soluble bioactive agents or hydrophobic biodegradable polymers for biomedical applications. We have formulated electrospun dextran membranes, and the effects of various processing parameters on the membrane properties were investigated. It was found that uniform nanofibrous dextran membranes could be formed by using water, DMSO/water, and DMSO/DMF mixtures as solvents through adjusting the processing conditions (solution concentration, voltage, and the distance between the electrode and the collecting plate). When water was used as a solvent, up to 10% (w/w) of bovine serum albumin (BSA) or lysozyme could be directly incorporated into the dextran electrospun membrane without compromising its morphology. No significant effect of the electrospinning process on lysozyme activity was observed. The composite electrospun membranes consisting of poly(D,L-lactide-co-glycolide) (PLGA) and dextran were obtained using DMSO/DMF (50/50, volume ratio) mixture as solvents. For cross-linking the electrospun membrane, dextran was modified by substitution of methacrylate groups at the hydroxyl sites. It was found that the electrospun membranes prepared from methacrylated dextran can be cured by UV irradiation in the presence of 1% of 2,2-dimethoxy-2-phenylacetophenone (DMPA) as a photoinitiator.

Glial cell and fibroblast cytotoxicity study on plasma-deposited diamond-like carbon coatings

Diamond-like carbon films have been evaluated as coatings to improve biocompatibility of orthopedic and cardiovascular implants. This study initiates a series of investigations that will evaluate diamond-like carbon (DLC) as a coating for improved biocompatibility in chronic neuroprosthetic implants. Studies in this report assess the cytotoxicity and cell adhesion behavior of DLC coatings exposed to glial and fibroblast cell lines in vitro. It can be concluded from these studies that DLC coatings do not adversely affect 3T3 fibroblast and T98-G glial cell function in vitro. We also successfully rendered DLC coatings non-adhesive (no significant fibroblast or glial cell adhesion) with surface immobilized dextran using methods developed for other biomaterials and applications. Future work will further develop DLC coatings on prototype microelectrode devices for chronic neural implant applications.

Enhanced cell attachment and osteoblastic activity by P-15 peptide-coated matrix in hydrogels

The cells in bone grow on a composite matrix made up of mineral and organic (mainly type-I collagen) components. In this study, anorganic bone mineral (ABM) particles were coated with a cell-binding domain of type-I collagen (P-15 peptide) to mimic the bone matrix components and suspended in injectable hyaluronate (Hy) hydrogels. The ABM/P-15/Hy was compared to ABM/Hy-the same matrix without P-15 peptide. Osteoblast-like HOS cells migrated through the hydrogels around ABM/P-15 or ABM particles; however, more cells adhered to ABM/P-15/Hy particles, and the cells formed better surface coverage and had more stress fibers on ABM/P-15/Hy. HOS cells cultured on ABM/P-15/Hy had increased osteogenic gene expression for alkaline phosphatase and bone morphogenetic proteins, and deposited more mineralized matrix. Studies with two different hydrogels (carboxymethylcellulose and sodium alginate) showed similar enhanced cell attachment and mineralization. The studies suggest that the ABM/P-15 in hydrogels can be used as an injectable biomimetic matrix to facilitate bone repair.

Photocrosslinked hyaluronic acid hydrogels: natural, biodegradable tissue engineering scaffolds

Ideally, rationally designed tissue engineering scaffolds promote natural wound healing and regeneration. Therefore, we sought to synthesize a biomimetic hydrogel specifically designed to promote tissue repair and chose hyaluronic acid (HA; also called hyaluronan) as our initial material. Hyaluronic acid is a naturally occurring polymer associated with various cellular processes involved in wound healing, such as angiogenesis. Hyaluronic acid also presents unique advantages: it is easy to produce and modify, hydrophilic and nonadhesive, and naturally biodegradable. We prepared a range of glycidyl methacrylate-HA (GMHA) conjugates, which were subsequently photopolymerized to form crosslinked GMHA hydrogels. A range of hydrogel degradation rates was achieved as well as a corresponding, modest range of material properties (e.g., swelling, mesh size). Increased amounts of conjugated methacrylate groups corresponded with increased crosslink densities and decreased degradation rates and yet had an insignificant effect on human aortic endothelial cell cytocompatibility and proliferation. Rat subcutaneous implants of the GMHA hydrogels showed good biocompatibility, little inflammatory response, and similar levels of vascularization at the implant edge compared with those of fibrin positive controls. Therefore, these novel GMHA hydrogels are suitable for modification with adhesive peptide sequences (e.g., RGD) and use in a variety of wound-healing applications.

Glial cell and fibroblast cytotoxicity study on 4026-cyclotene photosensitive benzocyclobutene (BCB) polymer films

Photosensitive benzocyclobutene (photo-BCB) is a class of polymers with the trade name Cyclotene. The photoimagable property of Cyclotene makes it suitable for the manufacture of microelectronic devices. The motivation behind this study is that we see an exciting application of photo-BCB as substrates in implantable microelectronic biomedical devices due to several desirable properties distinctive from other polymer materials. To our knowledge, however, photo-BCB has never been tested for biomedical implant applications, as evidenced by the lack reported data on its biocompatibility. This study takes the first step towards assessing photo-BCB biocompatibility by evaluating the cytotoxicity and cell adhesion behavior of Cyclotene 4026 coatings exposed to monolayers of glial and fibroblast cells in vitro. It can be concluded from these studies that photo-BCB films deposited on silicon wafers using microfabrication processes did not adversely affect 3T3 fibroblast and T98-G glial cell function in vitro. We also successfully rendered photo-BCB films non-adhesive (no significant fibroblast or glial cell adhesion) with surface immobilized dextran using methods developed for other biomaterials and applications. Future work will further develop prototype photo-BCB microelectrode devices for chronic neural implant applications.