Gamma irradiation of human bone allografts alters medullary lipids and releases toxic compounds for osteoblast-like cells

Evaluation of decellularization process for developing osteogenic bovine cancellous bone scaffolds in-vitro

Current immunological issues in bone grafting regarding the transfer of xenogeneic donor bone cells into the recipient are challenging the industry to produce safer acellular natural matrices for bone regeneration. The aim of this study was to investigate the efficacy of a novel decellularization technique for producing bovine cancellous bone scaffold and compare its physicochemical, mechanical, and biological characteristics with demineralized cancellous bone scaffold in an in-vitro study. Cancellous bone blocks were harvested from a bovine femoral head (18-24 months old) subjected to physical cleansing and chemical defatting, and further processed in two ways. Group I was subjected to demineralization, while Group II underwent decellularization through physical, chemical, and enzymatic treatments. Both were then freeze-dried, and gamma radiated, finally producing a demineralized bovine cancellous bone (DMB) scaffold and decellularized bovine cancellous bone (DCC) scaffold. Both DMB and DCC scaffolds were subjected to histological evaluation, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), fourier-transform infrared spectroscopy (FTIR), quantification of lipid, collagen, and residual nucleic acid content, and mechanical testing. The osteogenic potential was investigated through the recellularization of scaffolds with human osteoblast cell seeding and examined for cell attachment, proliferation, and mineralization by Alizarin staining and gene expression. DCC produced a complete acellular extracellular matrix (ECM) with the absence of nucleic acid content, wider pores with extensive interconnectivity and partially retaining collagen fibrils. DCC demonstrated a higher cell proliferation rate, upregulation of osteogenic differentiation markers, and substantial mineralized nodules production. Our findings suggest that the decellularization technique produced an acellular DCC scaffold with minimal damage to ECM and possesses osteogenic potential through the mechanisms of osteoconduction, osteoinduction, and osteogenesis in-vitro.

Reconstructive Allograft Preparation for Long Bone Intercalary Segments After Tumor Resections: Toronto Sarcoma Protocol

Background

The Reconstructive Allograft Preparation by Toronto Sarcoma (RAPTORS) protocol is reliable and reproducible without substantially adding to the surgical reconstruction time or cost. Our technique includes clearance of debris, lavage of the medullary canal, pressurized filling of the medullary canal with antibiotic-laden cement for its mechanical and antimicrobial properties, and insertion of cancellous autograft at the allograft-host junctional ends prior to dual-plate compression to fix the allograft into the defect1-3. Our experience with large intercalary allograft reconstruction has demonstrated high rates of long-term success and addresses the most common causes of large allograft failure (infection, fracture, and nonunion)4, as shown in our long-term outcome study1.

Description

Once the tumor is resected, it is used as a template for cutting and shaping the allograft to fit the bone defect and to restore length and anatomy. The frozen allograft is thawed in a container with povidone iodine and bacitracin saline solution until it reaches room temperature. The allograft is size-matched, and clearance of its intramedullary marrow contents is performed with use of curets and intramedullary reamers7. If 1 end of the allograft includes the metaphysis and is covered by dense cancellous bone, we try not to ream through this end because maintaining this metaphyseal cancellous surface will expedite bone healing. The segment is then thoroughly lavaged with "triple wash" solutions to clear out any remaining marrow contents and to ensure sterilization of the allograft. This serial-wash technique involves the use of 3 discrete antiseptic modalities and has been utilized at our institution with low rates of allograft infection. These antiseptic modalities include 10% weight-per-volume povidone iodine diluted 1:1 with normal saline solution, 3% weight-per-volume hydrogen peroxide diluted 1:1 with normal saline solution, and 50,000 units of sterile bacitracin lyophilized powder dissolved in 500 mL of normal saline solution. Following the triple wash, the medullary canal is filled with antibiotic-laden methylmethacrylate bone cement. If both ends are open, the far end of the segment is first plugged with the surgeon's finger or with gauze, or if 1 end is covered with cancellous bone, then retrograde filling of the canal with cement is performed from the open end. The cement is then pressurized to ensure complete filling of the intramedullary space. Before it sets, 1 cm of cement is removed from each open end of the allograft to allow for packing of autograft bone cancellous chips and to ensure that cement does not impede anatomic reduction of the allograft-host bone junction. For this step, cancellous autograft from the iliac crest is harvested with use of a separate sterile surgical setup in order to prevent contamination of the autograft site by instruments used for tumor resection. The cancellous autograft is packed into the space created after recessing the cement at the end(s) of the allograft and, using a bone tamp, the autograft is compressed into this cavity and into the corresponding end of the host long bone in order to improve the healing potential at the allograft-host bone junction(s)8. Finally, a dual compression plate construct is utilized for upper as well as lower-extremity reconstructions in most cases. The cement in the allograft must be completely hardened before drilling into it. The allograft-host bone junctions are sequentially compressed at both the proximal and distal ends to allow for maximal apposition of the osseous surfaces. Only 1 or 2 unicortical screws are placed into the allograft to hold it in place and to facilitate maximal compression at both bone junctions. Patient compliance during postoperative rehabilitation is essential to optimize healing and provide reliable and durable outcomes. Postoperative care following the RAPTORS technique includes limited early rehabilitation and long periods of non-weight-bearing until radiographic union is noted across both bone junctions, followed by gradual resumption of weight-bearing and more aggressive physiotherapy. See the Appendix for further details regarding each step of the procedure.

Alternatives

Intercalary reconstruction alternatives include various biological or endoprosthetic constructs. The other biological reconstruction options include the use of a free vascularized bone graft, distraction osteogenesis, combined vascularized fibula and allograft (i.e., the Capanna technique), or recycled tumor bones. Intercalary prostheses offer another reconstruction option for diaphyseal defects, but their feasibility is more limited in cases of periarticular segments with very short residual medullary canals. In such cases, there may be inadequate stem length for fixation, or the segment may require a custom implant that takes time to design and manufacture, which can be associated with high costs5.

Rationale

Major factors limiting the widespread use of allografts include infection, graft fracture, graft nonunion, and, in some locations, availability4,6. Our technique of allograft preparation with dual compression plating and triple-washing to provide mechanical and antimicrobial protection as well as augmented healing has shown reproducible results with low complication rates compared with the literature.

Expected Outcomes

There have been high rates of long-term allograft survival (84.4%) following intercalary long-bone reconstruction at our institution, with lower complication rates than those presented in the literature.

Important Tips

Transverse osteotomies of the allograft, made perpendicular to the long axis of the diaphysis/anatomical axis, are important to replicate the resected host bone. Transverse osteotomies, while inherently less stable than step-cut ones, allow for adjusting the rotation of the allograft segment as needed for maximal contact and compression, as well as restoration of anatomical limb rotation.It is important to perform meticulous clearance of the intramedullary contents while preserving the endosteal bone and allograft integrity. We would utilize hand-reaming rather than a power drill device, in order to prevent overreaming or breaking through the allograft bone.Place as few unicortical screws as possible into the allograft-cement construct in order to maintain its structural strength and minimize potential sites for vascular ingrowth and bone resorption.

Acronyms & Abbreviations

K-wires = Kirschner wiresW/V = weight per volume.

Functional acellular matrix for tissue repair

In view of their low immunogenicity, biomimetic internal environment, tissue- and organ-like physicochemical properties, and functionalization potential, decellularized extracellular matrix (dECM) materials attract considerable attention and are widely used in tissue engineering. This review describes the composition of extracellular matrices and their role in stem-cell differentiation, discusses the advantages and disadvantages of existing decellularization techniques, and presents methods for the functionalization and characterization of decellularized scaffolds. In addition, we discuss progress in the use of dECMs for cartilage, skin, nerve, and muscle repair and the transplantation or regeneration of different whole organs (e.g., kidneys, liver, uterus, lungs, and heart), summarize the shortcomings of using dECMs for tissue and organ repair after refunctionalization, and examine the corresponding future prospects. Thus, the present review helps to further systematize the application of functionalized dECMs in tissue/organ transplantation and keep researchers up to date on recent progress in dECM usage.

Effect of gamma rays and accelerated electron beam on medullary lipids decomposition: influence of dose and irradiation temperature

Ionizing radiation sterilization of non-defatted bone grafts has been found to deteriorate their quality and biocompatibility due to induction of lipid peroxidation products toxic for osteoblast-like cells. Therefore, the purpose of our study was to evaluate the effect of two types of ionizing radiation-gamma rays (G) or accelerated electron beam (EB) applied with two doses at different temperature conditions on hydrocarbons production, resulting from decomposition of palmitic and oleic acids-most abundant fatty acids in medullary lipids. Bone marrow samples isolated from femoral shafts of 6 male donors (aged 46-67 years) were irradiated with G or EB with doses of 25 or 35 kGy at different temperature conditions (ambient or deep freezing temperature). Fresh-frozen, non-irradiated samples served as control. Marrow lipids were extracted with n-hexane (Soxhlet's method), hydrocarbons fraction isolated on Florisil column chromatography, separated by gas chromatography and detected by mass spectrometry. Irradiation of bone marrow with sterilization doses of ionizing radiation (G and EB) was found to induce lipid radiolysis as measured by resulting hydrocarbons production. The effect was dose-dependent, whereas no marked influence of radiation type was observed. In contrast, irradiation temperature had a profound effect on lipids decomposition which was partially prevented while irradiation was performed in deep frozen state. Defatting of bone grafts prior to ionizing radiation sterilization seems essential for their biocompatibility, whereas irradiation in a deep-frozen state might compromise the effectiveness of sterilization and needs further studies.

Optimal delipidation solvent to secure extracellular matrix from human perirenal adipose tissue

The objective of this study was to select the optimal delipidation solvent for preparation of human perirenal adipose tissue-derived extracellular matrix (ECM). Human perirenal adipose tissue can be obtained in large amounts during surgery, and it can be an alternative source of human ECM. Delipidation is an essential procedure for the ECM preparation, because lipid strongly inhibits regeneration of target tissue. Isopropanol has been widely used as a delipidation solvent for adipose tissue. However, because adipose tissue is mostly composed of nonpolar lipid, a nonpolar solvent might be more effective for delipidation. We evaluated the delipidation efficiency of acetone, chloroform, methanol, ether, ethanol, isopropanol, water, chloroform/methanol, ethanol/heptane, ether/methanol, hexane/ethanol, and butanol/methanol solvents for ECM extraction from human perirenal adipose tissue. Among them, acetone-treated adipose tissue showed the greatest delipidation efficiency (93.05%), significantly lower residual DNA content, and the greatest residual collagen concentration (42.49 ± 0.05 μg/g). In addition, acetone-treated tissue also had well-preserved ultrastructure with high porosity and significantly low in vitro cytotoxicity. These results suggested that acetone may be an optimal delipidation solvent for extraction of ECM from human perirenal adipose tissue.

Magnesium cationic cue enriched interfacial tissue microenvironment nurtures the osseointegration of gamma-irradiated allograft bone

Regardless of the advancement of synthetic bone substitutes, allograft-derived bone substitutes still dominate in the orthopaedic circle in the treatments of bone diseases. Nevertheless, the stringent devitalization process jeopardizes their osseointegration with host bone and therefore prone to long-term failure. Hence, improving osseointegration and transplantation efficiency remains important. The alteration of bone tissue microenvironment (TME) to facilitate osseointegration has been generally recognized. However, the concept of exerting metal ionic cue in bone TME without compromising the mechanical properties of bone allograft is challenging. To address this concern, an interfacial tissue microenvironment with magnesium cationc cue was tailored onto the gamma-irradiated allograft bone using a customized magnesium-plasma surface treatment. The formation of the Mg cationic cue enriched interfacial tissue microenvironment on allograft bone was verified by the scanning ion-selective electrode technique. The cellular activities of human TERT-immortalized mesenchymal stem cells on the Mg-enriched grafts were notably upregulated. In the animal test, superior osseointegration between Mg-enriched graft and host bone was found, whereas poor integration was observed in the gamma-irradiated controls at 28 days post-operation. Furthermore, the bony in-growth appeared on magnesium-enriched allograft bone was significant higher. The mechanism possibly correlates to the up-regulation of integrin receptors in mesenchymal stem cells under modified bone TME that directly orchestrate the initial cell attachment and osteogenic differentiation of mesenchymal stem cells. Lastly, our findings demonstrate the significance of magnesium cation modified bone allograft that can potentially translate to various orthopaedic procedures requiring bone augmentation.

•

A modified interfacial Mg TME was tailored onto the GI allograft bone matrix without compromising the mechanical properties.

•

The SIET were applied to recognize the Mg²⁺-cue enriched interfacial TME on the surface of the Mg-treated bone allograft.

•

The rodent model that is analogous to the clinical use of allograft bone were applied to charaterize the osseointegration.

•

The boundary of the Mg-enriched allograft bone was already unable to be identified and become homogeneous at D28 post-op.

•

The Mg²⁺-cue enriched interfacial TME is able to convince the upregulation of several integrin receptors of MSCs.

Effect of High Hydrostatic Pressure on Human Trabecular Bone Regarding Cell Death and Matrix Integrity

The reconstruction of critical size bone defects is still clinically challenging. Even though the transplantation of autologous bone is used as gold standard, this therapy is accompanied by donor site morbidities as well as tissue limitations. The alternatively used allografts, which are devitalized due to thermal, chemical or physical processing, often lose their matrix integrity and have diminished biomechanical properties. High Hydrostatic Pressure (HHP) may represent a gentle alternative to already existing methods since HHP treated human osteoblasts undergo cell death and HHP treated bone cylinders maintain their mechanical properties. The aim of this study was to determine the biological effects caused by HHP treatment regarding protein/matrix integrity and type of cell death in trabecular bone cylinders. Therefore, different pressure protocols (250 and 300 MPa for 10, 20 and 30 min) and end point analysis such as quantification of DNA-fragmentation, gene expression, SDS-PAGE, FESEM analysis and histological staining were performed. While both protein and matrix integrity was preserved, molecular biological methods showed an apoptotic differentiation of cell death for lower pressures and shorter applications (250 MPa for 10 and 20 min) and necrotic differentiation for higher pressures and longer applications (300 MPa for 30 min). This study serves as a basis for further investigation as it shows that HHP successfully devitalizes trabecular bone cylinders.

In vivo remodeling of human cell-assembled extracellular matrix yarns

Cell-assembled extracellular matrix (CAM) has been used to produce vascular grafts. While these completely biological vascular grafts performed well in clinical trials, the in vivo remodeling and inflammatory response of this truly "bio" material has not yet been investigated. In this study, human CAM yarns were implanted subcutaneously in nude rats to investigate the innate immune response to this matrix. The impact of processing steps relevant to yarn manufacturing was evaluated (devitalization, decellularization, gamma sterilization, and twisting). We observed that yarns were still present after six months, and were integrated into a non-inflamed loose connective tissue. The CAM was repopulated by fibroblastic cells and blood vessels. While other yarns caused minor peripheral inflammation at an early stage (two weeks of implantation), gamma sterilization triggered a more intense host response dominated by the presence of M1 macrophages. The inflammatory response was resolved at six months. Yarn mechanical strength was decreased two weeks after implantation except for the more compact "twisted" yarn. While the strength of other yarns was stable after initial remodeling, the gamma-sterilized yarn continued to lose mechanical strength over time and was weaker than devitalized (control) yarns at six months. This is the first study to formally demonstrate that devitalized human CAM is very long-lived in vivo and does not trigger a degradative response, but rather is very slowly remodeled. This data supports a strategy to produce human textiles from CAM yarn for regenerative medicine applications where a scaffold with low inflammation and long-term mechanical properties are critical.

Current concepts for tissue transplant services for developing countries

The transplantation of tissues can save lives and re-establish vital functions, where no alternatives of comparable effectiveness exist. This has led to establishment of tissue transplantation as a successful practice worldwide; however, a great variability between countries remains in terms of donation levels, safety, quality of grafts and their efficacy. Tissue transplantation requires coordination of different agencies involved in the implementation of procurement, processing, storage and distribution of tissues and cells from different hospital units that perform surgical procedures with graft-type input requirements. This biomaterial-like requirement has led to the constant development of the area and today these graft products of human origin can be the starting point for new and more advanced biotechnological products. For long-term sustainability and successful transplantation units, a process management comparable to the pharmaceutical industry in terms of quality management systems must be established to produce safe and high-quality human-derived products. This review aims to update the current concepts of tissue transplant services for its application for developing countries using the current Chilean scenario as a case study. We summarize our findings proposing a set of guidelines/actions that should be followed to ensure smooth tissue transplant services implementations with high efficiency and safe use.

Extracellular Matrix-Based Biomaterials and Their Influence Upon Cell Behavior

Biologic scaffold materials composed of allogeneic or xenogeneic extracellular matrix (ECM) are commonly used for the repair and remodeling of injured tissue. The clinical outcomes associated with implantation of ECM-based materials range from unacceptable to excellent. The variable clinical results are largely due to differences in the preparation of the material, including characteristics of the source tissue, the method and efficacy of decellularization, and post-decellularization processing steps. The mechanisms by which ECM scaffolds promote constructive tissue remodeling include mechanical support, degradation and release of bioactive molecules, recruitment and differentiation of endogenous stem/progenitor cells, and modulation of the immune response toward an anti-inflammatory phenotype. The methods of ECM preparation and the impact of these methods on the quality of the final product are described herein. Examples of favorable cellular responses of immune and stem cells associated with constructive tissue remodeling of ECM bioscaffolds are described.

Assessment of the Defatting Efficacy of Mechanical and Chemical Treatment for Allograft Cancellous Bone and Its Effects on Biomechanics Properties of Bone

Objective

To assess the defatting efficacy of high pressure washing and gradient alcohol and biomechanical properties of defatted bone.

Methods

Fresh cancellous bone was obtained from the femoral condyle and divided into six groups according to different defatting treatments, which were: high pressure washing for 10 s (10S group), 20 s (20S group), and 30 s (30S group), gradient alcohol immersion (Alcohol group), acetone immersion (Acetone group), and non‐defatted (Fresh group). The appearance of six groups was observed, and the appearance of defatted bone and fresh bone was compared. The residual lipid content and infrared spectrum were used to compare the efficacy of defatting, the DNA content was used to compare the cell content after defatting, and the maximum stress and elastic modulus were used to compare the effects of defatting treatment on biomechanical properties.

Results

The fresh bone was yellow and the pores contained a lot of fat. The defatted bone was white and the porous network was clear. There was no difference in residual lipid content among the three groups with high pressure washing (1.45% ± 0.16%, 1.40% ± 0.13%, and 1.46% ± 0.11%, respectively) (P = 0.828). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (1.45% ± 0.16%, 1.28% ± 0.07%, and 1.13% ± 0.22%, respectively) (P = 0.125). Infrared spectra showed that the fat content of the five defatting groups was significantly lower than that of the fresh group. There was no difference in residual lipid content among the three groups with high pressure washing (4.53 ± 0.23 ug/mL, 4.61 ± 0.18 ug/mL, and 4.66 ± 0.25 ug/mL, respectively) (P = 0.645). There was no difference in residual lipid content among the 10S, alcohol, and acetone groups (4.53 ± 0.23 ug/mL, 4.29 ± 0.24 ug/mL, and 4.27 ± 0.29 ug/mL, respectively) (P = 0.247). The maximum stress of the bone decreased significantly with the increase of the washing time (9.95 ± 0.31 Mpa, 9.07 ± 0.45 Mpa, and 8.17 ± 0.35 Mpa, respectively) (P = 0.003). The elastic modulus of the bone decreased significantly with the increase of the washing time (116.40 ± 3.54 Mpa, 106.10 ± 5.29 Mpa, and 95.63 ± 4.08 Mpa, respectively) (P = 0.003). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group, and the acetone group (10.09 ± 0.67 Mpa, 9.95 ± 0.31 Mpa, 10.11 ± 0.07 Mpa, and 10.09 ± 0.39 Mpa, respectively) (P = 0.963). There was no statistical difference in the maximum stress between the fresh group, the 10S group, the alcohol group and the acetone group (119.93 ± 4.94 Mpa, 116.40 ± 3.54 Mpa, 118.27 ± 0.85 Mpa, 118.10 ± 4.52 Mpa, respectively) (P = 0.737).

Conclusion

The defatting efficiency was satisfactory at a time of 10 s under high pressure washing. In terms of defatting efficiency and its effect on biomechanical properties of bone, high pressure washing and gradient alcohol were similar to conventional acetone solvent extraction defatting.

Radioprotection and cross-linking of allograft bone in the presence of vitamin E

Bone allografts are the preferred method for bone augmentation in over 500,000 orthopedic surgical procedures in the US. Sterilization by ionizing radiation is the most effective method of minimizing the bioburden of bone allografts; however, radiation causes chain scission of collagen, resulting in the reduction of the allografts' mechanical strength. In this study, we doped bone allografts with vitamin E as radioprotectant using a novel two-step process to protect the collagen architecture against radiation damage and to preserve the mechanical strength of the construct. In addition, combining the radioprotectant with a cross-linking agent further minimized collagen degradation and further preserved the mechanical strength of the allografts. Both vitamin E and combined vitamin E/genipin-treated allograft were less cytotoxic to both osteoblasts and osteoclasts when compared to irradiated-only allografts. Host bone-allograft unionization was faster in a rat calvaria defect model with vitamin E-treated and combined vitamin E and genipin-treated allograft when compare to irradiated-only allografts. This method can enable the efficient and uniform radioprotective treatment of bone allograft of desired shapes for sterilization with improved mechanical strength and biointegration.

Accelerated Osteogenic Differentiation of MC3T3-E1 Cells by Lactoferrin-Conjugated Nanodiamonds through Enhanced Anti-Oxidant and Anti-Inflammatory Effects

The purpose of this study was to investigate the effects of lactoferrin (LF)-conjugated nanodiamonds (NDs) in vitro on both anti-oxidant and anti-inflammation activity as well as osteogenic promotion. The application of LF-NDs resulted in sustained release of LF for up to 7 days. In vitro anti-oxidant analyses performed using Dichlorofluorescin diacetate (DCF-DA) assay and cell proliferation studies showed that LF (50 μg)-NDs effectively scavenged the reactive oxygen species (ROS) in MC3T3-E1 cells (osteoblast-like cells) after H₂O₂ treatment and increased proliferation of cells after H₂O₂ treatment. Treatment of lipopolysaccharide (LPS)-induced MC3T3-E1 cells with LF-NDs suppressed levels of pro-inflammatory cytokines, including interleukin-1β (IL-1β) and tumor necrosis factor-α (TNF-α). In addition, LF-NDs were associated with outstanding enhancement of osteogenic activity of MC3T3-E1 cells due to increased alkaline phosphatase (ALP) and calcium deposition. Our findings suggest that LF-NDs are an important substrate for alleviating ROS effects and inflammation, as well as promoting osteogenic differentiation of cells.

Tissue-derived decellularized extracellular matrices toward cartilage repair and regeneration

The inability of cartilage tissue to self-heal due to its avascular nature often leads to conditions such as osteoarthritis, traumatic rupture of cartilage, and osteochondrosis. The cartilage provides cushioning effects between the joints and avoids bone frictions. The extracellular matrix (ECM) of cartilage consists predominantly of collagens, elastin, proteoglycans and glycoproteins. A number of tissue engineered ECM derived biological scaffolds and matrices are available for cartilage regeneration. The decellularized tissues provide appropriate bioactive cues in the absence of cellular components, hence avoiding immunological issue. However, the decellularization process involves several cellular disruption techniques that may alter the ECM architecture affecting bioactivity. Therefore, development of cell-free cartilage biomaterials with unaltered ECM integrity and bioactivity is of paramount necessity by smart selection of modified techniques and agents. Herein, we described about various decellularization methods, agents, techniques, and their applications in tissue/cartilage decellularization. It also contemplates various difficulties and future perspectives to troubleshoot the existing obstructions in tissue-derived cartilage matrices and their applications.

Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering

The construction of ceramic components with UV curing is a developing trend by an additive manufacturing (AM) technology, due to the excellent advantages of high precision selective fixation and rapid prototyping, the application of this technology to bone defect repair had become one of the hotspots of research. Hydroxyapatite (HAP) is one of the most popular calcium phosphate biomaterials, which is very close to the main ingredient of human bones. Thus, hydroxyapatite biomaterials are popular as bone graft materials. In summary, the preparation of HAP bioceramics by a 3D printing of digital light processing (DLP) is a promising work. However, the preparation of HAP hybrid suspensions with high solid loading and good fluidity that can be printed by DLP encountered some challenges. Therefore, the purpose of this work is to improve and develop a novel UV-curing suspension with a high solids loading, which the suspension with the hydrodynamic properties and stability are suitable for DLP printer, in order to compensate for the brittleness of HAP ceramics itself to a certain extent, a low amount of zirconia was added in the suspension as an additive to fabricate a zirconia toughened HAP bioceramic composite by a DLP of 3D printing. In this work, the HAP powder was pre-modified by two organic modifiers to improve the compatibility in the acrylic resin system, and the addition of the castor oil phosphate further reduced the shear stress of the suspension to ensure strong liquidity. The UV suspension with 60 wt% powder particle loading had a minimum viscosity of 7495 mPa·s at 30 rpm, which was vacuum sintered at 1100 °C, 1200 °C, and 1250 °C, respectively. The composite ceramics (with 6 wt% ZrO₂) at 1200 °C had a relative density of 90.7%, while the sintered samples at 1250 °C had stronger tensile strength and bending strength. The toughening effect of zirconia incorporation on HAP ceramics was also confirmed by the change of tensile modulus and bending modulus, whereas the corresponding mechanical properties were also significantly enhanced.

Application of a novel porous tantalum implant in rabbit anterior lumbar spine fusion model: in vitro and in vivo experiments

BACKGROUND

Some porous materials have been developed to enhance biologic fusion of the implants to bone in spine fusion surgeries. However, there are several inherent limitations. In this study, a novel biomedical porous tantalum was applied to in vitro and in vivo experiments to test its biocompatibility and osteocompatibility.

METHODS

Bone marrow-derived mesenchymal stem cells (BMSCs) were cultured on porous tantalum implant. Scanning electron microscope (SEM) and Cell Counting Kit-8 assay were used to evaluate the cell toxicity and biocompatibility. Twenty-four rabbits were performed discectomy only (control group), discectomy with autologous bone implanted (autograft group), and discectomy with porous tantalum implanted (tantalum group) at 3 levels: L3-L4, L4-L5, and L5-L6 in random order. All the 24 rabbits were randomly sacrificed at the different post-operative times (2, 4, 6, and 12 months; n = 6 at each time point). Histologic examination and micro-computed tomography scans were done to evaluate the fusion process. Comparison of fusion index scores between groups was analyzed using one-way analysis of variance. Other comparisons of numerical variables between groups were made by Student t test.

RESULTS

All rabbits survived and recovered without any symptoms of nerve injury. Radiographic fusion index scores at 12 months post-operatively between autograft and tantalum groups showed no significant difference (2.89 ± 0.32 vs. 2.83 ± 0.38, F = 244.60, P = 0.709). Cell Counting Kit-8 assay showed no significant difference of absorbance values between the leaching liquor group and control group (1.25 ± 0.06 vs. 1.23 ± 0.04, t = -0.644, P = 0.545), which indicated the BMSC proliferation without toxicity. SEM images showed that these cells had irregular shapes with long spindles adhered to the surface of tantalum implant. No implant degradation, wear debris, or osteolysis was observed. Histologic results showed solid fusion in the porous tantalum and autologous bone implanted intervertebral spaces.

CONCLUSION

This novel porous tantalum implant showed a good biocompatibility and osteocompatibility, which could be a valid biomaterial for interbody fusion cages.

[Effect of human tooth bone graft materials on proliferation and differentiation of mice mononuclear macrophage RAW264.7]

Objective

To investigate the effect of human tooth bone graft materials on the proliferation, differentiation, and morphology of macrophages, and to understand the biocompatibility and cytotoxicity of human tooth bone graft materials.

Methods

Fresh human teeth were collected to prepare human tooth bone graft materials, the adhesion of mouse mononuclear macrophages RAW264.7 to human bone graft materials was observed under confocal microscopy. Scanning electron microscopy was used to observe the morphology of human tooth bone graft materials, OSTEONⅡ synthetic highly resorbable bone grafting materials, and untreated tooth powder (dental particles without preparation reagents). Different components of the extract were prepared in 4 groups: group A (DMEM medium containing 10% fetal bovine serum), group B (human tooth bone graft materials), group C (OSTEONⅡ synthetic highly resorbable bone grafting materials), group D (untreated tooth powder without preparation reagents). The 4 groups of extracts were co-cultured with the cells, and the cytotoxicity was qualitatively determined by observing the cell morphological changes by inverted microscope. The cell proliferation and differentiation results and cell relative proliferation rate were determined by MTT method to quantitatively determine cytotoxicity. The cell viability was detected by trypanosoma blue staining, and tumor necrosis factor α (TNF-α ) and interleukin 6 (IL-6) expressions were detected by ELISA.

Results

Scanning electron microscopy showed that the surface of the human tooth bone graft material and the OSTEONⅡ synthetic highly resorbable bone grafting materials had a uniform pore structure, while the untreated tooth particle collagen fiber structure and the demineralized dentin layer collapsed without specific structure. Confocal microscopy showed that the cells grew well on human tooth bone graft materials. After co-culture with the extract, the morphology and quantity of cells in groups A, B, and C were normal, and the toxic reaction grades were all grade 0, while group D was grade 3 reaction. MTT test showed that the cytotoxicity of groups B and C was grade 0 or 1 at each time point, indicating that the materials were qualified. The cytotoxicity was grade 2 in group D at 1 day after culture, and was grade 4 at 3, 5, and 7 days. Combined with cell morphology analysis, the materials were unqualified. The trypanosoma blue staining showed that the number of cells in groups A, B, and C was significantly higher than that in group D at each time point ( P<0.05), but no significant difference was found among groups A, B, and C ( P<0.05). ELISA test showed that the levels of TNF-α and IL-6 in groups A, B, and C were significantly lower than those in group D ( P<0.05), but no significant difference was found among groups A, B, and C ( P<0.05).

Conclusion

The human tooth bone graft materials is co-cultured with mice mononuclear macrophages without cytotoxicity. The extract has no significant effect on cell proliferation and differentiation, does not increase the expression of inflammatory factors, has good biocompatibility, and is expected to be used for clinical bone defect repair.

Harnessing macrophage-mediated degradation of gelatin microspheres for spatiotemporal control of BMP2 release

Biomaterials-based approaches to harnessing the immune and inflammatory responses to potentiate wound healing hold important promise. Bone fracture healing is characterized by an acute inflammatory phase, followed by a transition to a regenerative and repair phase. In this study, we developed genipin-crosslinked gelatin microspheres designed to be preferentially degraded by inflammatory (M1) macrophages. Highly crosslinked (>90%) microspheres allowed efficient incorporation of bioactive bone morphogenetic protein 2 (BMP2), a potent stimulator of osteogenesis in progenitor cells, via electrostatic interactions. Release of BMP2 was directly correlated with degradation of the gelatin matrix. Exposure of microspheres to polarized murine macrophages showed that degradation was significantly higher in the presence of M1 macrophages, relative to alternatively activated (M2) macrophages and unpolarized controls. Microsphere degradation in the presence of non-inflammatory cells resulted in very low degradation rates. The expression of matrix metalloproteinases (MMPs) and tissue inhibitors of MMP (TIMPs) by macrophages were consistent with the observed phenotype-dependent degradation rates. Indirect co-culture of BMP2-loaded microspheres and macrophages with isolated adipose-derived mesenchymal stem cells (MSC) showed that M1 macrophages produced the strongest osteogenic response, comparable to direct supplementation of the culture medium with BMP2. Controlled release systems that are synchronized with the inflammatory response have the potential to provide better spatiotemporal control of growth factor delivery and therefore may improve the outcomes of recalcitrant wounds.

Novel Formulation Strategy to Improve the Feasibility of Amifostine Administration

PURPOSE

Amifostine (AMF), a radioprotectant, is FDA-approved for intravenous administration in cancer patients receiving radiation therapy (XRT). Unfortunately, it remains clinically underutilized due to adverse side effects. The purpose of this study is to define the pharmacokinetic profile of an oral AMF formulation potentially capable of reducing side effects and increasing clinical feasibility.

METHODS

Calvarial osteoblasts were radiated under three conditions: no drug, AMF, and WR-1065 (active metabolite). Osteogenic potential of cells was measured using alkaline phosphatase staining. Next, rats were given AMF intravenously or directly into the jejunum, and pharmacokinetic profiles were evaluated. Finally, rats were given AMF orally or subcutaneously, and blood samples were analyzed for pharmacokinetics.

RESULTS

WR-1065 preserved osteogenic potential of calvarial osteoblasts after XRT to a greater degree than AMF. Direct jejunal AMF administration incurred a systemic bioavailability of 61.5%. Subcutaneously administrated AMF yielded higher systemic levels, a more rapid peak exposure (0.438 vs. 0.875 h), and greater total systemic exposure of WR-1065 (116,756 vs. 16,874 ng*hr/ml) compared to orally administered AMF.

CONCLUSIONS

Orally administered AMF achieves a similar systemic bioavailability and decreased peak plasma level of WR-1065 compared to intravenously administered AMF, suggesting oral AMF formulations maintain radioprotective efficacy without causing onerous side effects, and are clinically feasible.

Human bone graft cytocompatibility with mesenchymal stromal cells is comparable after thermal sterilization and washing followed by γ-irradiation: an in vitro study

Human bone allografts present a better alternative to autografts in terms of minimization of the harvesting procedure complications. Prior to the use in clinical applications, they require sterilization which aims to reduce bioburden. This often comes at the expense of their biological properties as carriers of cells. In this study, we evaluated the cytocompatibility of human bone allografts processed and sterilized by three different methods with mesenchymal stromal cells. Bone morphology, biological and biochemical properties of the extracted bone-conditioned medium and viability of cells were assessed. We found that chemical sterilization had a strong negative effect on cell viability, whereas thermal sterilization and washing with subsequent γ-irradiation both resulted in a bone graft compatible with the progenitor cells. Moreover, washing of the bone prior to sterilization allowed solid removal of cell debris and other bone marrow components. Taken together, our findings demonstrate the importance of a proper choice of the bone graft processing method for the production of the biomaterial suitable for tissue engineering.

Mesenchymal Stromal Cells from the Maternal Segment of Human Umbilical Cord is Ideal for Bone Regeneration in Allogenic Setting

Umbilical cord (UC) is a discarded product from the operating theatre and a ready source of mesenchymal stromal cells (MSCs). MSCs from UC express both embryonic and adult mesenchymal stem cell markers and are known to be hypoimmunogenic and non-tumorigenic and thus suitable for allogeneic cell transplantation. Our study aimed to determine the degree of immunotolerance and bone-forming capacity of osteodifferentiated human Wharton's jelly-derived mesenchymal stromal cells (hWJ-MSCs) from different segments of UC in an allogenic setting. UCs were obtained from healthy donors delivering a full-term infant by elective Caesarean section. hWJ-MSCs were isolated from 3 cm length segment from the maternal and foetal ends of UCs. Three-dimensional fibrin constructs were formed and implanted intramuscularly into immunocompetent mice. The mice were implanted with 1) fibrin construct with maternal hWJ-MSCs, 2) fibrin construct with foetal hWJ-MSCs, or 3) fibrin without cells; the control group received sham surgery. After 1 month, the lymphoid organs were analysed to determine the degree of immune rejection and bone constructs were analysed to determine the amount of bone formed. A pronounced immune reaction was noted in the fibrin group. The maternal segment constructs demonstrated greater osteogenesis than the foetal segment constructs. Both maternal and foetal segment constructs caused minimal immune reaction and thus appear to be safe for allogeneic bone transplant. The suppression of inflammation may be a result of increased anti-inflammatory cytokine production mediated by the hWJ-MSC. In summary, this study demonstrates the feasibility of using bone constructs derived from hWJ-MSCs in an allogenic setting.

Enhancing Cell Proliferation and Osteogenic Differentiation of MC3T3-E1 Pre-osteoblasts by BMP-2 Delivery in Graphene Oxide-Incorporated PLGA/HA Biodegradable Microcarriers

Lack of bioactivity has seriously restricted the development of biodegradable implants for bone tissue engineering. Therefore, surface modification of the composite is crucial to improve the osteointegration for bone regeneration. Bone morphogenetic protein-2 (BMP-2), a key factor in inducing osteogenesis and promoting bone regeneration, has been widely used in various clinical therapeutic trials. In this study, BMP-2 was successfully immobilized on graphene oxide-incorporated PLGA/HA (GO-PLGA/HA) biodegradable microcarriers. Our study demonstrated that the graphene oxide (GO) facilitated the simple and highly efficient immobilization of peptides on PLGA/HA microcarriers within 120 min. To further test in vitro, MC3T3-E1 cells were cultured on different microcarriers to observe various cellular activities. It was found that GO and HA significantly enhanced cell adhesion and proliferation. More importantly, the immobilization of BMP-2 onto the GO-PLGA/HA microcarriers resulted in significantly greater osteogenic differentiation of cells in vitro, as indicated by the alkaline phosphate activity test, quantitative real-time polymerase chain reaction analysis, immunofluorescence staining and mineralization on the deposited substrates. Findings from this study revealed that the method to use GO-PLGA/HA microcarriers for immobilizing BMP-2 has a great potential for the enhancement of the osseointegration of bone implants.

The efficacy and sterilisation of human decellularised dermal allografts with combinations of cupric ions and hydrogen peroxide

Decellularised tissue allografts have been used in reconstructive surgical applications and transplantation for many years. Some of the current methods of sterilisation have a detrimental effect on the tissue graft structure and function. The anti-microbial activity of cupric ions and hydrogen peroxide (H₂O₂) are well known however their combined application is not currently utilised as a decontamination agent in the tissue banking world sector. The aim of this study was to determine the combined concentrations of copper chloride (CuCl₂) and H₂O₂ that have the optimal bactericidal and sporicidal activity on decellularised (dCELL) human dermis. The first part of this study established the decimal reduction time (D-value) of CuCl₂ (0.1 mg/L and 1 mg/L) together with H₂O₂ (0.01, 0.1, 0.5 and 1%) for Staphylococcus epidermidis, Escherichia coli and Bacillus subtilis spores. The second part of this study identified the most effective CuCl₂ and H₂O₂ concentration that decontaminated dCELL human dermis inoculated with these pathogens. Of all the concentrations tested, 0.1 mg/L CuCl₂ in combination with 1% H₂O₂ had the shortest D-value; S. epidermidis D = 3.15 min, E. coli D = 2.62 min and B. subtilis spores D = 18.05 min. However when adsorbed onto dCELL dermis, S. epidermidis and E. coli were more susceptible to 1 mg/L CuCl₂ together with 0.5% H₂O₂. These studies show promise of CuCl₂-H₂O₂ formulations as potential sterilants for decellularised dermal allografts.

Biomimetic Mineralization of Biomaterials Using Simulated Body Fluids for Bone Tissue Engineering and Regenerative Medicine<sup/>

Development of synthetic biomaterials imbued with inorganic and organic characteristics of natural bone that are capable of promoting effective bone tissue regeneration is an ongoing goal of regenerative medicine. Calcium phosphate (CaP) has been predominantly utilized to mimic the inorganic components of bone, such as calcium hydroxyapatite, due to its intrinsic bioactivity and osteoconductivity. CaP-based materials can be further engineered to promote osteoinductivity through the incorporation of osteogenic biomolecules. In this study, we briefly describe the microstructure and the process of natural bone mineralization and introduce various methods for coating CaP onto biomaterial surfaces. In particular, we summarize the advantages and current progress of biomimetic surface-mineralizing processes using simulated body fluids for coating bone-like carbonated apatite onto various material surfaces such as metals, ceramics, and polymers. The osteoinductive effects of integrating biomolecules such as proteins, growth factors, and genes into the mineral coatings are also discussed.

Reimplantation of a Large Extruded Segment of Bone in an Open Fracture

Replacing an extruded segment of bone in an open fracture imposes a challenging decision concerning the best and safest patient management. There are numerous advantages to restoring the patient's own extruded bone segment to its original location, particularly when the bone segment is of structural importance. However, reimplantation of contaminated and avascular extruded bone segments can potentially result in serious infection or nonunion. There is no conclusive evidence regarding the best decontamination protocol for the safest use of the recovered bone segment as an autologous graft. Among the different chemical sterilization solutions 10% povidone-iodine and chlorhexidine gluconate solutions are the author's most preferred solutions. Regarding cellular toxicity, 10% povidone-iodine has been found to be the most favorable among the readily available solutions.

Use of polyvinylpyrrolidone-iodine solution for sterilisation and preservation improves mechanical properties and osteogenesis of allografts

Allografts eliminate the disadvantages associated with autografts and synthetic scaffolds but are associated with a disease-transmission risk. Therefore, allograft sterilisation is crucial. We aimed to determine whether polyvinylpyrrolidone-iodine (PVP-I) can be used for sterilisation and as a new wet-preservation method. PVP-I-sterilised and preserved allografts demonstrated improved mechanical property, osteogenesis, and excellent microbial inhibition. A thigh muscle pouch model of nude mice showed that PVP-I-preserved allografts demonstrated better ectopic formation than Co₆₀-sterilised allografts (control) in vivo (P < 0.05). Furthermore, the PVP-I-preserved group showed no difference between 24 h and 12 weeks of allograft preservation (P > 0.05). PVP-I-preserved allografts showed more hydrophilic surfaces and PVP-I-sterilised tendons showed higher mechanical strength than Co₆₀-sterilised tendons (P < 0.05). The level of residual PVP-I was higher without washing and with prolonged preservation (P < 0.05). In vitro cellular tests showed that appropriate PVP-I concentration was nontoxic to preosteoblast cells, and cellular differentiation measured by alkaline phosphatase activity and osteogenic gene markers was enhanced (P < 0.05). Therefore, the improved biological performance of implanted allografts may be attributable to better surface properties and residual PVP-I, and PVP-I immersion can be a simple, easy method for allograft sterilisation and preservation.

Disinfection of human musculoskeletal allografts in tissue banking: a systematic review

Musculoskeletal allografts are typically disinfected using antibiotics, irradiation or chemical methods but protocols vary significantly between tissue banks. It is likely that different disinfection protocols will not have the same level of microorganism kill; they may also have varying effects on the structural integrity of the tissue, which could lead to significant differences in terms of clinical outcome in recipients. Ideally, a disinfection protocol should achieve the greatest bioburden reduction with the lowest possible impact on tissue integrity. A systematic review of three databases found 68 laboratory and clinical studies that analyzed the microbial bioburden or contamination rates of musculoskeletal allografts. The use of peracetic acid–ethanol or ionizing radiation was found to be most effective for disinfection of tissues. The use of irradiation is the most frequently published method for the terminal sterilization of musculoskeletal allografts; it is widely used and its efficacy is well documented in the literature. However, effective disinfection results were still observed using the BioCleanse™ Tissue Sterilization process, pulsatile lavage with antibiotics, ethylene oxide, and chlorhexidine. The variety of effective methods to reduce contamination rate or bioburden, in conjunction with limited high quality evidence provides little support for the recommendation of a single bioburden reduction method.

Radiation sterilization of tissue allografts: A review

Tissue substitutes are required in a number of clinical conditions for treatment of injured and diseased tissues. Tissues like bone, skin, amniotic membrane and soft tissues obtained from human donor can be used for repair or reconstruction of the injured part of the body. Allograft tissues from human donor provide an excellent alternative to autografts. However, major concern with the use of allografts is the risk of infectious disease transmission. Therefore, tissue allografts should be sterilized to make them safe for clinical use. Gamma radiation has several advantages and is the most suitable method for sterilization of biological tissues. This review summarizes the use of gamma irradiation technology as an effective method for sterilization of biological tissues and ensuring safety of tissue allografts.

Biomaterials with Antibacterial and Osteoinductive Properties to Repair Infected Bone Defects

The repair of infected bone defects is still challenging in the fields of orthopedics, oral implantology and maxillofacial surgery. In these cases, the self-healing capacity of bone tissue can be significantly compromised by the large size of bone defects and the potential/active bacterial activity. Infected bone defects are conventionally treated by a systemic/local administration of antibiotics to control infection and a subsequent implantation of bone grafts, such as autografts and allografts. However, these treatment options are time-consuming and usually yield less optimal efficacy. To approach these problems, novel biomaterials with both antibacterial and osteoinductive properties have been developed. The antibacterial property can be conferred by antibiotics and other novel antibacterial biomaterials, such as silver nanoparticles. Bone morphogenetic proteins are used to functionalize the biomaterials with a potent osteoinductive property. By manipulating the carrying modes and release kinetics, these biomaterials are optimized to maximize their antibacterial and osteoinductive functions with minimized cytotoxicity. The findings, in the past decade, have shown a very promising application potential of the novel biomaterials with the dual functions in treating infected bone defects. In this review, we will summarize the current knowledge of novel biomaterials with both antibacterial and osteoinductive properties.

Evaluation of Copper and Hydrogen Peroxide Treatments on the Biology, Biomechanics, and Cytotoxicity of Decellularized Dermal Allografts

Decellularized tissue allografts are paving the way as an alternative to cellular tissue transplantation. Effective sterilization or decontamination of tissue allografts is paramount for the safety of the allograft; however, some of the current sterilization procedures have a detrimental effect on the tissue scaffold. The bactericidal and virucidal activity of copper (II) ions and hydrogen peroxide (H2O2) have been widely reported, however, their effect on the biology, biochemistry, and biocompatibility of decellularized tissue have yet to be elucidated. In this study, decellularized human dermis (dCELL human dermis) was treated with copper (II) chloride (CuCl2) and H2O2; both singly and in combination, and parameters, including concentration, pH, and synergy between CuCl2 and H2O2, were evaluated to identify conditions where any detrimental effects on the tissue scaffold were observed. Skin from 13 human donors was retrieved with appropriate consent and processed into dCELL human dermis. The dCELL human dermis was then treated for 3 h with 0.1 mg/L-1 g/L (w/v) CuCl2 and 0.01-7.5% (v/v) H2O2 and combinations of both of these in the same concentration range. dCELL human dermis treated with solutions of 0.1 mg/L-1 g/L CuCl2 or 0.01-7.5% H2O2 caused no detrimental effects on gross histology, collagen denaturation, collagen orientation, and biomechanical properties of the tissue or cytotoxicity. The highest combined concentration of CuCl2 and H2O2 demonstrated an increase in ultimate tensile strength, loss of collagen type IV immunostaining at the dermal-epidermal junction, and in vitro cytotoxicity. Combinations within the range of up to 10 mg/L CuCl2 with up to 0.5% H2O2 had no effect. The data identify the concentrations of CuCl2 and H2O2 solutions that have no effect on the biological, biomechanical, and biochemical properties of dCELL human dermis, while retaining biocompatibility. These treatments may be suitable for use as sterilization/decontamination agents on human decellularized tissues.

Decellularized and Engineered Tendons as Biological Substitutes: A Critical Review

Tendon ruptures are a great burden in clinics. Finding a proper graft material as a substitute for tendon repair is one of the main challenges in orthopaedics, for which the requirement of a biological scaffold would be different for each clinical application. Among biological scaffolds, the use of decellularized tendon-derived matrix increasingly represents an interesting approach to treat tendon ruptures. We analyzed in vitro and in vivo studies focused on the development of efficient protocols for the decellularization and for the cell reseeding of the tendon matrix to obtain medical devices for tendon substitution. Our review considered also the proper tendon source and preclinical animal models with the aim of entering into clinical trials. The results highlight a wide panorama in terms of allogenic or xenogeneic tendon sources, specimen dimensions, physical or chemical decellularization techniques, and the cell type variety for reseeding from terminally differentiated to undifferentiated mesenchymal stem cells and their static or dynamic culture employed to generate implantable constructs tested in different animal models. We try to identify the most efficient approach to achieve an optimal biological scaffold for biomechanics and intrinsic properties, resembling the native tendon and being applicable in clinics in the near future, with particular attention to the Achilles tendon substitution.

Kidney bioengineering in regenerative medicine: An emerging therapy for kidney disease

The prevalence of end-stage renal disease is emerging as a serious worldwide public health problem because of the shortage of donor organs and the need to take lifelong immunosuppressive medication in patients who receive a transplanted kidney. Recently, tissue bioengineering of decellularization and recellularization scaffolds has emerged as a novel strategy for organ regeneration, and we review the critical technologies supporting these methods. We present a summary of factors associated with experimental protocols that may shed light on the future development of kidney bioengineering and we discuss the cell sources and bioreactor techniques applied to the recellularization process. Finally, we review some artificial renal engineering technologies and their future prospects, such as kidney on a chip and the application of three-dimensional and four-dimensional printing in kidney tissue engineering.

Fast degradable citrate-based bone scaffold promotes spinal fusion

It is well known that high rates of fusion failure and pseudoarthrosis development (5~35%) are concomitant in spinal fusion surgery, which was ascribed to the shortage of suitable materials for bone regeneration. Citrate was recently recognized to play an indispensable role in enhancing osteconductivity and osteoinductivity, and promoting bone formation. To address the material challenges in spinal fusion surgery, we have synthesized mechanically robust and fast degrading citrate-based polymers by incorporating N-methyldiethanolamine (MDEA) into clickable poly(1, 8-octanediol citrates) (POC-click), referred to as POC-M-click. The obtained POC-M-click were fabricated into POC-M-click-HA matchstick scaffolds by compositing with hydroxyapatite (HA) for interbody spinal fusion in a rabbit model. Spinal fusion was analyzed by radiography, manual palpation, biomechanical testing, and histological evaluation. At 4 and 8 weeks post surgery, POC-M-click-HA scaffolds presented optimal degradation rates that facilitated faster new bone formation and higher spinal fusion rates (11.2±3.7, 80±4.5 at week 4 and 8, respectively) than the poly(L-lactic acid)-HA (PLLA-HA) control group (9.3±2.4 and 71.1±4.4) (p<0.05). The POC-M-click-HA scaffold-fused vertebrates possessed a maximum load and stiffness of 880.8±14.5 N and 843.2±22.4 N/mm, respectively, which were also much higher than those of the PLLA-HA group (maximum: 712.0±37.5 N, stiffness: 622.5±28.4 N/mm, p<0.05). Overall, the results suggest that POC-M-click-HA scaffolds could potentially serve as promising bone grafts for spinal fusion applications.

Decellularization and Delipidation Protocols of Bovine Bone and Pericardium for Bone Grafting and Guided Bone Regeneration Procedures

The combination of bone grafting materials with guided bone regeneration (GBR) membranes seems to provide promising results to restore bone defects in dental clinical practice. In the first part of this work, a novel protocol for decellularization and delipidation of bovine bone, based on multiple steps of thermal shock, washes with detergent and dehydration with alcohol, is described. This protocol is more effective in removal of cellular materials, and shows superior biocompatibility compared to other three methods tested in this study. Furthermore, histological and morphological analyses confirm the maintenance of an intact bone extracellular matrix (ECM). In vitro and in vivo experiments evidence osteoinductive and osteoconductive properties of the produced scaffold, respectively. In the second part of this study, two methods of bovine pericardium decellularization are compared. The osmotic shock-based protocol gives better results in terms of removal of cell components, biocompatibility, maintenance of native ECM structure, and host tissue reaction, in respect to the freeze/thaw method. Overall, the results of this study demonstrate the characterization of a novel protocol for the decellularization of bovine bone to be used as bone graft, and the acquisition of a method to produce a pericardium membrane suitable for GBR applications.

A retrospective study on annual evaluation of radiation processing for frozen bone allografts complying to quality system requirements

Bone allografts have been used widely to fill up essential void in orthopaedic surgeries. The benefit of using allografts to replace and reconstruct musculoskeletal injuries, fractures or disease has obtained overwhelming acceptance from orthopaedic surgeons worldwide. However, bacterial infection and disease transmission through bone allograft transplantation have always been a significant issue. Sterilization by radiation is an effective method to eliminate unwanted microorganisms thus assist in preventing life threatening allograft associated infections. Femoral heads procured from living donors and long bones (femur and tibia) procured from cadaveric donors were sterilized at 25 kGy in compliance with international standard ISO 11137. According to quality requirements, all records of bone banking were evaluated annually. This retrospective study was carried out on annual evaluation of radiation records from 1998 until 2012. The minimum doses absorbed by the bones were ranging from 25.3 to 38.2 kGy while the absorbed maximum doses were from 25.4 to 42.3 kGy. All the bones supplied by our UMMC Bone Bank were sterile at the required minimum dose of 25 kGy. Our analysis on dose variation showed that the dose uniformity ratios in 37 irradiated boxes of 31 radiation batches were in the range of 1.003-1.251, which indicated the doses were well distributed.

Auto Bone Banking: Innovative Method for Bone Preservation

Introduction:

Bone grafting is an integral part of orthopaedic surgery; the use of bone graft is increasing consistently in traumatology and also in complex revision surgeries of hip and knee arthroplasties. Considering this fact there is a need for some way to find solution for a bone graft which has more osteoinduction, osteoconduction as well as osteogenecity and also reduced rates of graft rejection and transmission of infections. All these qualities are found in autogenous bone graft. We hereby put forward a innovative method of bone preservation by using patients own femoral head and preserving it in patients own iliac pouch and making it available for future use.

Case Report:

From 2008 to 2012, total 17 numbers of operated sides were included in this method; patients had femoral neck fracture, osteoarthritis or avascular necrosis of femoral head and who underwent either hemi or total hip arthroplasty. Intraoperatively the resected femoral head was preserved in iliac pouch on ipsilateral side. This integrates with the native bone and additional bone graft would be made available for future use. We did not get opportunity to use the stored auograft.

Conclusion:

This is very innovative concept for preserving patient’s autogenous femoral head for future use. As conventional allograft relies upon screening procedure for infections, proper storage facilities and are expensive.

Porcine bone grafts defatted by lipase: efficacy of defatting and assessment of cytocompatibility

Defatting is an important procedure for the preparation of bone grafts because lipids in bone grafts strongly influence the osteointegration. Lipases have been widely used in different fields. However, study on the application to defatting process for bone grafts preparation has never been found so far. In this study, bone samples were treated respectively by lipase, NaHCO(3)/Na(2)CO(3), acetone and deionized water. The lipids content of processed bone grafts was calculated in Soxhlet extractor method. Surface morphology of the bone grafts was observed under scanning electron microscope (SEM). DNA content of processed bone grafts was measured. Cytocompatibility was evaluated by co-culturing mouse preosteoblasts (MC3T3-E1) on defatted bone cubes. Proliferation rates of MC3T3-E1 were examined by cell counting kit-8 (CCK-8) assay. No statistically significant difference was found between lipids amount of bone processed by lipase (0.46 ± 0.16 %) and acetone (1.11 ± 0.13 %) (P > 0.05). Both of them were significantly lower than that in groups processed by Na(2)CO(3)/NaHCO(3) (3.46 ± 0.69 %) and deionized water (8.88 ± 0.18 %) (P = 0.000). Only cell debris were discovered over the surface of bone processed by lipase or acetone, while lipid droplets were observed on bone processed by Na(2)CO(3)/NaHCO(3) or water by SEM. The difference of DNA concentration between the bone processed by lipase (3.16 ± 0.81 ng/μl) and acetone (4.14 ± 0.40 ng/μl) is not statistically significant (P > 0.05). Both of them are significantly lower than that groups processed by Na(2)CO(3)/NaHCO(3) (5.22 ± 0.38 ng/μl) and water (7.88 ± 0.55 ng/μl) (P < 0.05). MC3T3-E1 cells maintained their characteristic spreading on the trabecular surfaces of bone processed by lipase. There were no statistically significant differences among absorbance of lipase, acetone groups in CCK-8 assay. The application of lipase to bone tissue defatting appears to be a very promising technique for bone grafts preparation.

Effect of lactoferrin-impregnated porous poly(lactide-co-glycolide) (PLGA) microspheres on osteogenic differentiation of rabbit adipose-derived stem cells (rADSCs)

The aim of this study was to develop lactoferrin (LF)-impregnated porous poly(lactide-co-glycolide) (PLGA) microspheres (PMs) to induce osteogenic differentiation of rabbit adipose-derived stem cells (rADSCs). Porous PLGA PMs were fabricated by a fluidic device and their surfaces were modified with heparin-dopamine (Hep-DOPA). Then, LF (100μg, 500μg, and 1000μg) was impregnated on the surface of heparinized PMs (Hep-PMs) via electrostatic interactions to yield LF-impregnated PMs. PMs and modified PMs were characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Osteogenic differentiation of rADSCs on PMs and modified PMs was demonstrated by alkaline phosphatase (ALP) activity, calcium deposition, and mRNA expression of osteocalcin and osteopontin. Successful immobilization of Hep-DOPA and LF on the surface of PMs was confirmed by XPS analysis. LF-impregnated PMs generated significantly greater ALP activity, calcium deposition, and mRNA expression of osteocalcin and osteopontin compared with PMs. These results suggested that LF-impregnated PMs effectively induced osteogenic differentiation of rADSCs.

The use of a novel bone allograft wash process to generate a biocompatible, mechanically stable and osteoinductive biological scaffold for use in bone tissue engineering

Fresh-frozen biological allograft remains the most effective substitute for the 'gold standard' autograft, sharing many of its osteogenic properties but, conversely, lacking viable osteogenic cells. Tissue engineering offers the opportunity to improve the osseointegration of this material through the addition of mesenchymal stem cells (MSCs). However, the presence of dead, immunogenic and potentially harmful bone marrow could hinder cell adhesion and differentiation, graft augmentation and incorporation, and wash procedures are therefore being utilized to remove the marrow, thereby improving the material's safety. To this end, we assessed the efficiency of a novel wash technique to produce a biocompatible, biological scaffold void of cellular material that was mechanically stable and had osteoinductive potential. The outcomes of our investigations demonstrated the efficient removal of marrow components (~99.6%), resulting in a biocompatible material with conserved biomechanical stability. Additionally, the scaffold was able to induce osteogenic differentiation of MSCs, with increases in osteogenic gene expression observed following extended culture. This study demonstrates the efficiency of the novel wash process and the potential of the resultant biological material to serve as a scaffold in bone allograft tissue engineering.

Enhanced differentiation of human embryonic stem cells on extracellular matrix-containing osteomimetic scaffolds for bone tissue engineering

Current methods of treating critical size bone defects include autografts and allografts, however, both present major limitations including donor-site morbidity, risk of disease transmission, and immune rejection. Tissue engineering provides a promising alternative to circumvent these shortcomings through the use of autologous cells, three-dimensional scaffolds, and growth factors. We investigated the development of a scaffold with native bone extracellular matrix (ECM) components for directing the osteogenic differentiation of human embryonic stem cells (hESCs). Toward this goal, a microsphere-sintering technique was used to fabricate poly(lactic-co-glycolic acid) (PLGA) scaffolds with optimum mechanical and structural properties. Human osteoblasts (hOBs) were seeded on these scaffolds to deposit bone ECM for 14 days. This was followed by a decellularization step leaving the mineralized matrix intact. Characterization of the decellularized PLGA scaffolds confirmed the deposition of calcium, collagen II, and alkaline phosphatase by osteoblasts. hESCs were seeded on the osteomimetic substrates in the presence of osteogenic growth medium, and osteogenicity was determined according to calcium content, osteocalcin expression, and bone marker gene regulation. Cell proliferation studies showed a constant increase in number for hESCs seeded on both PLGA and ECM-coated PLGA scaffolds. Calcium deposition by hESCs was significantly higher on the osteomimetic scaffolds compared with the control groups. Consistently, immunofluorescence staining demonstrated an increased expression of osteocalcin in hESCs seeded on ECM-coated osteomimetic PLGA scaffolds. Gene expression analysis of RUNX2 and osteocalcin further confirmed osteogenic differentiation of hESCs at the highest expression level on osteomimetic PLGA. These results together demonstrate the potential of PLGA scaffolds with native bone ECM components to direct osteogenic differentiation of hESCs and induce bone formation.

Supercharging irradiated allografts with mesenchymal stem cells improves acetabular bone grafting in revision arthroplasty

PURPOSE

The procedure of bone allografting associated with a reinforcement device is widely used for acetabulum revision. However in absence of biologic fixation of the allograft, failure of the reconstruction may occur. We made the hypothesis that it would be possible to load these grafts with bone marrow derived mesenchymal stem cells (MSC) to rescue the osteogenic capacity of an allogenic dead bone and therefore enhance incorporation of allografts with the host bone and decrease the number of failures related to the allograft.

METHOD

We identified 60 patients who had undergone acetabular component revision for aseptic failure of cemented implants associated with massive periacetabular osteolysis and Paprosky type 3A or 3B classification (without pelvic discontinuity) between 1996 and 2001. The study group of 30 patients received MSCs in the allograft and at the host graft junction. The average total number of MSCs received by each patient was 195,000 cells (range 86,000-254,000 cells). The control group of 30 patients had no MSCs in the allograft. Patients were matched for the size of periacetabular osteolysis (Paprosky type 3A or 3B). We compared the evolution of the allografts and evaluated cup migration and revision of the hips as end points at a minimum of 12 years or until failure.

RESULT

Better radiographic graft union rates and less allograft resorption were observed with allografts loaded with stem cells. Allograft resorption was significantly decreased in the group with allograft loaded with MSCs (1.2 cm(2) -range 0-2.3 cm(2)-of resorption on radiographs in the group with MSCs; versus 6 cm(2), range 2.1-8.5 cm(2) in the group without MSCs). The rate of mechanical failure was highest (p = 0.01) among the 30 patients with allograft without stem cells (9/30; 30 %) compared with no failures for patients with allograft loaded with stem cells. Revision of the cup was necessary in nine patients in the control group. No revision was performed in the 30 patients of the study group with MSCs.

CONCLUSION

For acetabular defect reconstruction, loading the allograft with MSCs has resulted in a lower rate of failure as compared with allograft without MSCs.

Angiogenesis and osteogenesis at incorporation process of onlay bone graft

PURPOSE

The roles of angiogenesis and osteogenesis in autologous and allogenic bone grafts and the use of platelet-rich plasma (PRP) as a modifier were investigated.

MATERIALS AND METHODS

Forty rabbit mandibles received onlay grafts of fresh autologous and frozen allogeneic bone. PRP was added on the right side. After intervals of 3, 7, 14, 28, and 56 days, the animals were euthanized. Hematoxylin and eosin staining was used to measure the quantity and area of osteoblasts. Sections stained with toluidine blue showed newly formed bone area. In sections with Weigert-van Gieson staining, the number of vessels and their lumens was quantified. The quantity and area of cellular arrangements expressing CD31 and the area of vessels were obtained.

RESULTS

Quantities of osteoblasts and their areas, newly formed matrices, and vessels and their lumen areas were obtained and identified by immunomarking with CD31. In general, values for these were higher in rabbits with allogeneic bone grafts and on the sides where PRP had been added. There was a variable significance between categories and days. It was confirmed that osteogenesis was intensified when angiogenesis was consolidated.

CONCLUSIONS

Angiogenesis was important for greater osteoblast differentiation and bone matrix synthesis, ensuring consolidation of onlay grafts with the receptor bed. Allogeneic grafts and PRP intensified these processes.