Aromatic dental monomers affect the activity of cholesterol esterase

Antimicrobial, biocompatibility, and physicochemical properties of novel adhesive methacrylate dental monomers

For the advancement of Class V restoratives, our goal was to evaluate the physicochemical and mechanical properties, antimicrobial functionality, and cytotoxic potential of novel antimicrobial copolymers. 5-Carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethylpentan-1-aminium bromide (AMadh1) and 10-carboxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyldecan-1-aminium bromide (AMadh2) were incorporated into light-curable urethane dimethacrylate, polyethylene glycol–extended urethane dimethacrylate, ethyl 2-(hydroxymethyl) acrylate resin (UPE resin). In the AMadhs-UPE resin, the hydrophobic/hydrophilic balance, degree of vinyl conversion, flexural strength, elastic modulus, and shear bond strength were assessed. Antimicrobial properties were measured using Streptococcus mutans (planktonic and biofilm). Cytotoxicity was tested using human gingival fibroblasts and mouse connective tissue fibroblasts (ATCC® CCL-1™) exposed to two-fold serial dilutions (≤10.6 mmol/L AMadh1 or ≤8.8 mmol/L AMadh2). At 10% mass of AMadh, the attained degree of vinyl conversion values (AMadh1 = 90.1% and AMadh2 = 88.5%) were not statistically different from the UPE resin (88.1%). At both AMadh levels, the flexural strength was reduced in a dose-dependent manner. Elastic modulus and contact angle were not significantly affected by AMadh1. Variations in elastic modulus and contact angle were observed with AMadh2; however, this does not disqualify it in future design of Class V restoratives. Compared to UPE resin, AMadh1-UPE and AMadh2-UPE (10% mass) copolymers reduced S. mutans biofilm 4.2- and 1.6-fold, respectively (p ≤ 0.006). In direct contact with human gingival fibroblasts or ATCC CCL-1 cells, at biologically relevant concentrations, the AMadhs did not adversely affect cell viability or their metabolic activity. This effort addresses a significant oral health issue associated with elderly populations. Its successful completion is expected to yield dental restoratives with well-controlled biofunction.

Esterase from a cariogenic bacterium hydrolyzes dental resins

OBJECTIVES

To identify and characterize specific esterases from S. mutans with degradative activity toward methacrylate-based resin monomers.

METHODS

Out of several putative esterases, an esterase encoded in an Open Reading Frame as SMU_118c (The National Center for Biotechnology Information, NCBI), was found to have true hydrolase activities. SMU_118c was cloned, expressed, purified and further characterized for its respective hydrolytic activity towards ester-containing nitrophenyl substrates and the universal resin monomers bis-phenyl-glycidyl-dimethacrylate (bisGMA) and triethyleneglycol dimethacrylate (TEGDMA) at neutral (7.0) or cariogenic (5.5) pH. Mass spectrometry (MS) was used to verify the expression of SMU_118c protein in S. mutans UA159.

RESULTS

Similar to the whole cell activity of S. mutans, SMU_118c showed the highest affinity toward para-nitrophenyl acetate (pNPA) and para-nitrophenyl butyrate (pNPB) vs. ortho-nitrophenyl butyrate (oNPB) and butyrylthiocholine iodide (BTC) (p < 0.05). The esterase retained 60% of its activity after 21 days and hydrolyzed bisGMA at a higher rate than TEGDMA at both neutral and cariogenic pH (p < 0.001), similarly to the predominant human salivary esterase degradative activity. MS confirmed that SMU_118c is an intracellular protein in S. mutans UA159 and expressed under pathogenic (pH 5.5) growth conditions.

SIGNIFICANCE

The similarity in the activity profile to the whole S. mutans bacterial cell, the stability over time at cariogenic pH, the preference to hydrolyze bisGMA and confirmed expression profile suggest that SMU_118c could be a significant contributor to the whole bacterial degradative activity of S. mutans toward the degradation of resin composites, adhesives and the restoration-tooth interface, potentially accelerating restoration's failure.

STATEMENT OF SIGNIFICANCE

The current study builds upon our highly-cited previous study by Bourbia et al., (JDR, 2013) that reported on that the cariogenic bacterium, S. mutans has esterase-like activities that enable the bacterium to degrade dental composites and adhesives. The current submission is the first to report on the isolation and characterization of the specific esterase activity (SMU_118c) from S. mutans that is a significant contributor to the whole bacterial degradative activity toward the hydrolysis of dental resins. This activity compromises the restoration-tooth interface, increases interfacial bacterial microleakage (Kermanshahi et al., JDR 2010), potentially contributing to the pathogenesis of recurrent caries around resin composite restorations. This represent a significant contribution to the field of biomaterials and their clinical performance.

Effect of the environmental pollutant bisphenol A dimethacylate (BAD) on Ca2+ movement and viability in OC2 human oral cancer cells

The environmental pollutant bisphenol A dimethacylate (BAD) has been used as a dental composite. The effect of BAD on cytosolic Ca(2+) concentrations ([Ca(2+)]i) and viability in OC2 human oral cancer cells was explored. The Ca(2+)-sensitive fluorescent dye fura-2 was applied to measure [Ca(2+)]i. BAD induced [Ca(2+)]i rises in a concentration-dependent manner. The response was reduced by removing extracellular Ca(2+). BAD-evoked Ca(2+) entry was suppressed by nifedipine, econazole, and SK&F96365. In Ca(2+)-free medium, incubation with the endoplasmic reticulum Ca(2+) pump inhibitor thapsigargin abolished BAD-induced [Ca(2+)]i rise. Inhibition of phospholipase C with U73122 did not alter BAD-induced [Ca(2+)]i rise. At 10-30μM, BAD inhibited cell viability, which was not reversed by chelating cytosolic Ca(2+). BAD (20-30μM) also induced apoptosis. Collectively, in OC2 cells, BAD induced a [Ca(2+)]i rise by evoking phospholipase C-independent Ca(2+) release from the endoplasmic reticulum and Ca(2+) entry via store-operated Ca(2+) channels. BAD also caused apoptosis.

Effects of oxidation on the hydrolysis by cholesterol esterase of sitosteryl esters as compared to a cholesteryl ester

Phytosteryl esters (PE) are used as ingredients in functional food to decrease plasma concentration of low density lipoprotein-cholesterol (LDL-C). Effective impairment of cholesterol absorption by PE suggests that these esters are hydrolyzed by the pancreatic cholesterol esterase (CEase, EC 3.1.1.13) and the liberated sterol may interfere with cholesterol reducing its intestinal absorption. PE-enriched foods are marketed for cooking purposes, and temperature is one of the most important factors leading to the formation of oxidation products. Very little is known about the outcome of PE oxides during the digestive process. A new analytical method based on mass spectrometric detection directly after enzymatic reaction was developed to determine in vitro the activity of CEase on PE and their oxides present in functional food. Using this method, we identified a new inhibitor of CEase: sitosteryl 9,10-dihydroxystearate, which behaves as a non-competitive inhibitor of the hydrolysis of cholesteryl oleate and sitosteryl oleate.

A semi-empirical computational model for the inhibition of porcine cholesterol esterase

Cholesterol esterase significantly contributes to cell membrane structure. It also facilitates transfer of cholesterol and phospholipids across membranes. Inhibition of this enzyme by a number of xenobiotics has been reported. This research sought to confirm if a widely used methacrylate monomer, bisphenol A dimethacrylate, inhibits porcine cholesterol esterase since this and other methacrylates are known to leach from various biomaterial preparations. A quantum mechanically developed computational chemistry model is presented. Specific chemical information linking potential mechanisms of cholesterol esterase inhibition to chemical structure is shown. Model chemical descriptors identified the importance of maximum oxygen valency and molecular shape/size to cholesterol esterase inhibition. A porcine cholesterol esterase inhibition mechanism is inherent in bisphenol A dimethacrylate which mimics chemical properties of reported cholesterol esterase inhibitors. This predictive semiempirical quantum mechanical model can be used to design new cholesterol esterase non-inhibitors for biocompatible biomaterials used in an aqueous environment.

Mutual influence of cholesterol esterase and pseudocholinesterase on the biodegradation of dental composites

It has been demonstrated that human saliva contains cholesterol esterase (CE)- and pseudocholinesterase (PCE)-like hydrolase activities. While PCE has been shown to preferentially degrade triethylene glycol dimethacrylate (TEGDMA) and its derivatives, CE has a greater catalytic effect on the breakdown of bis-phenol-A-diglycidyl dimethacrylate (bisGMA) components in composite dental resins. The current study seeks to determine if there is a mutual influence between the different esterases with respect to the biodegradation of resin composite. Photopolymerized model composite resin samples (containing 60% by weight fraction of silanated barium glass filler) based on bisGMA/TEGDMA (bis) or urethane-modified bisGMA/TEGDMA/bisEMA (ubis) monomers were incubated in buffer, CE and/or PCE solutions (pH=7.0, 37 degrees C) for 8 and 16 days. The incubation solutions were analyzed for degradation products using high-performance liquid chromatography, UV spectroscopy and mass spectrometry. In the bis system, higher amounts (p<0.05) of a bisGMA derived product, bishydroxy-propoxyphenyl-propane (bisHPPP), were detected in the combined enzyme group as compared to the sum of the two individual enzyme groups. In the ubis system, similar comparisons showed that higher levels (p<0.05) of bisHPPP were detected in the combined group at 8 days while higher amounts (p<0.05) of a bisEMA derived product, ethoxylated bis-phenol A, were detected in the combined group at 16 days. The study concluded that CE and PCE act synergistically to increase the biodegradation of both composite resin materials.