Role of metal-ligand coordination in the folding pathway of zinc finger peptides

Structural motifs in the early metallation steps of Zn(II) and Cd(II) binding to apo-metallothionein 1a

Many proteins require a metal cofactor to function and these metals are often involved in the protein folding process. The protein metallothionein (MT) has a dynamic structure capable of binding to a variety of metals with different stoichiometries. The most well-understood structure is the seven-metal, two domain structure formed upon metallation using Zn(II) or Cd(II). However, the partially metallated states and the pathways to form these clusters are less well-understood, although it is known that the pathways are pH dependent. Using stopped flow methods, it is shown that the metallation rates of the less cooperative Zn(II) binding pathway is much more impacted by low pH conditions that that of the more cooperative Cd(II) binding pathway. Electrospray ionization mass spectrometry (ESI-MS) methods reveal specific mixtures of bridging and terminally bound MxSy structures form in the first few metallation steps. Using a combination of methods, the data show that the result of unfolding this intrinsically disordered apo-MT structure using guanidinium chloride is that the formation of preliminary bridging structures that form in the first few metallation steps is impeded. The data show that more terminally bound structures form. Our conclusion is that the compact conformation of the native apo-MT at physiological pH allows for rapid formation of complex metal-thiolate structures with high affinity that provides protection from oxidation, a function that is suppressed upon unfolding. Overall, these results highlight both the importance of the apo-MT structure in the metallation pathway, but also the differences in Zn(II) and Cd(II) binding under different conditions.

Regulatory effects of post-translational modifications on zDHHC S-acyltransferases

The human zDHHC S-acyltransferase family comprises 23 enzymes that mediate the S-acylation of a multitude of cellular proteins, including channels, receptors, transporters, signaling molecules, scaffolds, and chaperones. This reversible post-transitional modification (PTM) involves the attachment of a fatty acyl chain, usually derived from palmitoyl-CoA, to specific cysteine residues on target proteins, which affects their stability, localization, and function. These outcomes are essential to control many processes, including synaptic transmission and plasticity, cell growth and differentiation, and infectivity of viruses and other pathogens. Given the physiological importance of S-acylation, it is unsurprising that perturbations in this process, including mutations in ZDHHC genes, have been linked to different neurological pathologies and cancers, and there is growing interest in zDHHC enzymes as novel drug targets. Although zDHHC enzymes control a diverse array of cellular processes and are associated with major disorders, our understanding of these enzymes is surprisingly incomplete, particularly with regard to the regulatory mechanisms controlling these enzymes. However, there is growing evidence highlighting the role of different PTMs in this process. In this review, we discuss how PTMs, including phosphorylation, S-acylation, and ubiquitination, affect the stability, localization, and function of zDHHC enzymes and speculate on possible effects of PTMs that have emerged from larger screening studies. Developing a better understanding of the regulatory effects of PTMs on zDHHC enzymes will provide new insight into the intracellular dynamics of S-acylation and may also highlight novel approaches to modulate S-acylation for clinical gain.

Tuning coiled coil stability with histidine-metal coordination

Coiled coils (CCs) have emerged as versatile building blocks for the synthesis of nanostructures, drug delivery systems and biomimetic hydrogels. Bioengineering metal coordination sites into the terminal ends of a synthetic coiled coil (CC), we generate a nanoscale biological building block with tunable stability. The reversible coordination of Ni2+ thermodynamically stabilizes the CC, as shown with circular dichroism spectroscopy. Using atomic force microscopy-based single-molecule force spectroscopy, it is further shown that Ni2+-binding reinforces the CC mechanically, increasing the barrier height for dissociation. When used as a dynamic crosslink in polyethyleneglycol-based hydrogels, the single-molecule stability of the CC is directly transferred to the bulk material and determines its viscoelastic properties. This reversibly tunable CC, thus, highlights an effective strategy for rationally engineering the single-molecule properties of biomolecular building blocks, which can be translated to the emergent properties of biomimetic materials, as well as other CC containing molecular assemblies.

A conserved maternal-specific repressive domain in Zelda revealed by Cas9-mediated mutagenesis in Drosophila melanogaster

In nearly all metazoans, the earliest stages of development are controlled by maternally deposited mRNAs and proteins. The zygotic genome becomes transcriptionally active hours after fertilization. Transcriptional activation during this maternal-to-zygotic transition (MZT) is tightly coordinated with the degradation of maternally provided mRNAs. In Drosophila melanogaster, the transcription factor Zelda plays an essential role in widespread activation of the zygotic genome. While Zelda expression is required both maternally and zygotically, the mechanisms by which it functions to remodel the embryonic genome and prepare the embryo for development remain unclear. Using Cas9-mediated genome editing to generate targeted mutations in the endogenous zelda locus, we determined the functional relevance of protein domains conserved amongst Zelda orthologs. We showed that neither a conserved N-terminal zinc finger nor an acidic patch were required for activity. Similarly, a previously identified splice isoform of zelda is dispensable for viability. By contrast, we identified a highly conserved zinc-finger domain that is essential for the maternal, but not zygotic functions of Zelda. Animals homozygous for mutations in this domain survived to adulthood, but embryos inheriting these loss-of-function alleles from their mothers died late in embryogenesis. These mutations did not interfere with the capacity of Zelda to activate transcription in cell culture. Unexpectedly, these mutations generated a hyperactive form of the protein and enhanced Zelda-dependent gene expression. These data have defined a protein domain critical for controlling Zelda activity during the MZT, but dispensable for its roles later in development, for the first time separating the maternal and zygotic requirements for Zelda. This demonstrates that highly regulated levels of Zelda activity are required for establishing the developmental program during the MZT. We propose that tightly regulated gene expression is essential to navigate the MZT and that failure to precisely execute this developmental program leads to embryonic lethality.

Following fertilization, the one-celled zygote must be rapidly reprogrammed to enable the development of a new, unique organism. During these initial stages of development there is little or no transcription of the zygotic genome, and maternally deposited products control this process. Among the essential maternal products are mRNAs that encode transcription factors required for preparing the zygotic genome for transcriptional activation. This ensures that there is a precisely coordinated hand-off from maternal to zygotic control. In Drosophila melanogaster, the transcription factor Zelda is essential for activating the zygotic genome and coupling this activation to the degradation of the maternally deposited products. Nonetheless, the mechanism by which Zelda functions remains unclear. Here we used Cas9-mediated genome engineering to determine the functional requirements for highly conserved domains within Zelda. We identified a domain required specifically for Zelda’s role in reprogramming the early embryonic genome, but not essential for its functions later in development. Surprisingly, this domain restricts the ability of Zelda to activate transcription. These data demonstrate that Zelda activity is tightly regulated, and we propose that precise regulation of both the timing and levels of genome activation is required for the embryo to successfully transition from maternal to zygotic control.

Heterogeneous-Backbone Foldamer Mimics of Zinc Finger Tertiary Structure

A variety of oligomeric backbones with compositions deviating from biomacromolecules can fold in defined ways. Termed "foldamers," these agents have diverse potential applications. A number of protein-inspired secondary structures (e.g., helices, sheets) have been produced from unnatural backbones, yet examples of tertiary folds combining several secondary structural elements in a single entity are rare. One promising strategy to address this challenge is the systematic backbone alteration of natural protein sequences, through which a subset of the native side chains is displayed on an unnatural building block to generate a heterogeneous backbone. A drawback to this approach is that substitution at more than one or two sites often comes at a significant energetic cost to fold stability. Here we report heterogeneous-backbone foldamers that mimic the zinc finger domain, a ubiquitous and biologically important metal-binding tertiary motif, and do so with a folded stability that is superior to the natural protein on which their design is based. A combination of UV-vis spectroscopy, isothermal titration calorimetry, and multidimensional NMR reveals that suitably designed oligomers with >20% modified backbones can form native-like tertiary folds with metal-binding environments identical to the prototype sequence (the third finger of specificity factor 1) and enhanced thermodynamic stability. These results expand the scope of heterogeneous-backbone foldamer design to a new tertiary structure class and show that judiciously applied backbone modification can be accompanied by improvement to fold stability.

Zinc to cadmium replacement in the prokaryotic zinc-finger domain

Given the similar chemical properties of zinc and cadmium, zinc finger domains have been often proposed as mediators of the toxic and carcinogenic effects exerted by this xenobiotic metal. The effects of zinc replacement by cadmium in different eukaryotic zinc fingers have been reported. In the present work, to evaluate the effects of such substitution in the prokaryotic zinc finger, we report a detailed study of its functional and structural consequences on the Ros DNA binding domain (Ros87). We show that this protein, which bears important structural differences with respect to the eukaryotic domains, appears to structurally tolerate the zinc to cadmium substitution and the presence of cadmium does not affect the DNA binding activity of the protein. Moreover, we show for the first time how zinc to cadmium replacement can also take place in a cellular context. Our findings both complement and extend previous results obtained for different eukaryotic zinc fingers, suggesting that metal substitution in zinc fingers may be of relevance to the toxicity and/or carcinogenicity mechanisms of this metal.

Cysteine and histidine shuffling: mixing and matching cysteine and histidine residues in zinc finger proteins to afford different folds and function

Zinc finger proteins utilize zinc for structural purposes: zinc binds to a combination of cysteine and histidine ligands in a tetrahedral coordination geometry facilitating protein folding and function. While much is known about the classical zinc finger proteins, which utilize a Cys(2)His(2) ligand set to coordinate zinc and fold into an anti-parallel beta sheet/alpha helical fold, there are thirteen other families of 'non-classical' zinc finger proteins for which relationships between metal coordination and protein structure/function are less defined. This 'Perspective' article focuses on two classes of these non-classical zinc finger proteins: Cys(3)His type zinc finger proteins and Cys(2)His(2)Cys type zinc finger proteins. These proteins bind zinc in a tetrahedral geometry, like the classical zinc finger proteins, yet they adopt completely different folds and target different oligonucleotides. Our current understanding of the relationships between ligand set, metal ion, fold and function for these non-classical zinc fingers is discussed.

Stability and folding behavior analysis of zinc-finger using simple models

Zinc-fingers play crucial roles in regulating gene expression and mediating protein-protein interactions. In this article, two different proteins (Sp1f2 and FSD-1) are investigated using the Gaussian network model and anisotropy elastic network model. By using these simple coarse-grained methods, we analyze the structural stabilization and establish the unfolding pathway of the two different proteins, in good agreement with related experimental and molecular dynamics simulation data. From the analysis, it is also found that the folding process of the zinc-finger motif is predominated by several factors. Both the zinc ion and C-terminal loop affect the folding pathway of the zinc-finger motif. Knowledge about the stability and folding behavior of zinc-fingers may help in understanding the folding mechanisms of the zinc-finger motif and in designing new zinc-fingers. Meanwhile, these simple coarse-grained analyses can be used as a general and quick method for mechanistic studies of metalloproteins.

AnhE, a metallochaperone involved in the maturation of a cobalt-dependent nitrile hydratase

Acetonitrile hydratase (ANHase) of Rhodococcus jostii RHA1 is a cobalt-containing enzyme with no significant sequence identity with characterized nitrile hydratases. The ANHase structural genes anhA and anhB are separated by anhE, predicted to encode an 11.1-kDa polypeptide. An anhE deletion mutant did not grow on acetonitrile but grew on acetamide, the ANHase reaction product. Growth on acetonitrile was restored by providing anhE in trans. AnhA could be used to assemble ANHase in vitro, provided the growth medium was supplemented with 50 microM CoCl(2). Ten- to 100-fold less CoCl(2) sufficed when anhE was co-expressed with anhA. Moreover, AnhA contained more cobalt when produced in cells containing AnhE. Chromatographic analyses revealed that AnhE existed as a monomer-dimer equilibrium (100 mm phosphate, pH 7.0, 25 degrees C). Divalent metal ions including Co(2+), Cu(2+), Zn(2+), and Ni(2+) stabilized the dimer. Isothermal titration calorimetry studies demonstrated that AnhE binds two half-equivalents of Co(2+) with K(d) of 0.12 +/- 0.06 nM and 110 +/- 35 nM, respectively. By contrast, AnhE bound only one half-equivalent of Zn(2+) (K(d) = 11 +/- 2 nM) and Ni(2+) (K(d) = 49 +/- 17 nM) and did not detectably bind Cu(2+). Substitution of the sole histidine residue did not affect Co(2+) binding. Holo-AnhE had a weak absorption band at 490 nM (epsilon = 9.7 +/- 0.1 m(-1) cm(-1)), consistent with hexacoordinate cobalt. The data support a model in which AnhE acts as a dimeric metallochaperone to deliver cobalt to ANHase. This study provides insight into the maturation of NHases and metallochaperone function.

[Conformational regulation of amyloid beta-peptide by lipid membranes and metal ions]

Conformational transition of monomeric amyloid beta-peptide (Abeta) to a self-associated beta-sheet structure is considered to be an initial step in the development of Alzheimer's disease. Several lines of evidence suggest that physiologically abundant lipid membranes and metal ions are involved in this step. We have demonstrated that Abeta binds to the phosphatidylcholine membrane in the lamellar gel phase but not in the liquid crystalline phase by using fluorescence and circular dichroism spectroscopy. The membrane-bound Abeta molecule takes alpha-helical or beta-sheet structure depending on the temperature. Tightly packed phosphatidylcholine membranes appear to serve as a platform for non-electrostatic binding and self-association of Abeta. We have also examined Zn(II) and Cu(II) binding modes of Abeta by Raman spectroscopy. The Raman spectra demonstrate that three histidine residues in the N-terminal region of Abeta provide primary metal binding sites. Zn(II) binds to the N(tau) atom of histidine and the peptide aggregates through intermolecular His-Zn-His bridges. In contrast, Cu(II) ion is chelated by the N(pi) atom of histidine and deprotonated main-chain amide nitrogens to form a soluble complex. Our findings on the conformational regulation of Abeta may help in better understanding the molecular basis for the development of Alzheimer's disease.

Monitoring prion protein expression in complex biological samples by SERS for diagnostic applications

Surface-enhanced Raman spectroscopy (SERS) allows a new insight into the analysis of cell physiology. In this work, the difficulty of producing suitable substrates that, besides permitting the amplification of the Raman signal, do not interact with the biological material causing alteration, has been overcome by a combined method of hydrothermal green synthesis and thermal annealing. The SERS analysis of the cell membrane has been performed with special attention to the cellular prion protein PrP(C). In addition, SERS has also been used to reveal the prion protein-Cu(II) interaction in four different cell models (B104, SH-SY5Y, GN11, HeLa), expressing PrP(C) at different levels. A significant implication of the current work consists of the intriguing possibility of revealing and quantifying prion protein expression in complex biological samples by a cheap SERS-based method, replacing the expensive and time-consuming immuno-assay systems commonly employed.

Metal-coupled folding of Cys2His2 zinc-finger

Zinc-fingers, which widely exist in eukaryotic cell and play crucial roles in life processes, depend on the binding of zinc ion for their proper folding. To computationally study the zinc-coupled folding of the zinc-fingers, charge transfer and metal induced protonation/deprotonation effects have to be considered. Here, by attempting to implicitly account for such effects in classical molecular dynamics and performing intensive simulations with explicit solvent for the peptides with and without zinc binding, we investigate the folding of the Cys2His2-type zinc-finger motif and the coupling between the peptide folding and zinc binding. We find that zinc ion not only stabilizes the native structure but also participates in the whole folding process. It binds to the peptide at an early stage of folding and directs or modulates the folding and stabilizations of the component beta-hairpin and alpha-helix. Such a crucial role of zinc binding is mediated by the packing of the conserved hydrophobic residues. We also find that the packing of the hydrophobic residues and the coordination of the native ligands are coupled. Meanwhile, the processes of zinc binding, mis-ligation, ligand exchange, and zinc induced secondary structure conversion as well as the water behavior due to the involvement of zinc ion are characterized. Our results are in good agreement with related experimental observations and provide significant insight into the general mechanisms of the metal cofactor dependent protein folding and other metal-induced conformational changes of biological importance.

Impacts of Cd(II) on the conformation and self-aggregation of Alzheimer's tau fragment corresponding to the third repeat of microtubule-binding domain

Environmental exposure to some heavy metals such as cadmium appears to be a risk factor for Alzheimer's disease (AD), however, definite mechanism of their toxicity in AD remains to be elucidated. Previous studies largely focused on the metal ions binding to beta-amyloid, however, very few papers concerned the interaction between tau and metal ions. For the first time, we investigated the impacts of Cd(II) on the conformation and self-aggregation of Alzheimer's tau peptide R3, corresponding to the third repeat of microtubule-binding domain. The initial state of R3 was proven to be dimeric linked by intermolecular disulfide bond, in the non-reducing buffer (Tris-HCl buffer pH7.5, containing no reducing reagent). In this paper, we show that Cd(II) can accelerate heparin-induced aggregation of R3 or independently induce the aggregation of R3, as monitored by ThS fluorescence. In the presence of Cd(II), the resulting R3 filaments became much smaller, as revealed by electron microscopy. Binding to the Cd(II) ion, the dimeric R3 partially lost its random coil, and converted to alpha-helix structure, as revealed by CD and Raman spectrum. Stoichiometric analysis of CD signal against the ratio of [Cd(II)]/[R3] suggested that the coordination intermediate consisted of two R3 dimers binding to a central cadmium ion. As the seed, the coordination intermediate could extensively accelerate the self-aggregation of R3 via promoting the nucleation step. On the other hand, gain in alpha-helix structure on the peptide chain, by coordinating with Cd(II), could be a critical role to promote self-aggregation, as revealed by Raman spectrum. These results provide a further insight into the mechanism of tau filament formation and emphasize the possible involvement of Cd(II) in the pathogenesis of AD.

All-Electron Calculations of the Nucleation Structures in Metal-Induced Zinc-Finger Folding: Role of the Peptide Backbone

Although the folding of individual protein domains has been extensively studied both experimentally and theoretically, protein folding induced by a metal cation has been relatively understudied. Almost all folding mechanisms emphasize the role of the side-chain interactions rather than the peptide backbone in the protein folding process. Herein, we focus on the thermodynamics of the coupled metal binding and protein folding of a classical zinc-finger (ZF) peptide, using all-electron calculations to obtain the structures of possible nucleation centers and free energy calculations to determine their relative stability in aqueous solution. The calculations indicate that a neutral Cys first binds to hexahydrated Zn2+ via its ionized sulfhydryl group and neutral backbone oxygen, with the release of four water molecules and a proton. Another nearby Cys then binds in the same manner as the first one, yielding a fully dehydrated Zn2+. Subsequently, two His ligands from the C-terminal part of the peptide successively dislodge the Zn-bound backbone oxygen atoms to form the native-like Zn-(Cys)2(His)2 complex. Each successive Zn complex accumulates increasingly favorable and native interactions, lowering the energy of the ZF polypeptide, which concomitantly becomes more compact, reducing the search volume, thus guiding folding to the native state. In the protein folding process, not only the side chains but also the backbone peptide groups play a critical role in stabilizing the nucleation structures and promoting the hydrophobic core formation.

Understanding the folding and stability of a zinc finger-based full sequence design protein with replica exchange molecular dynamics simulations

Full sequence design protein FSD-1 is a designed protein based on the motif of zinc finger protein. In this work, its folding mechanism and thermal stability are investigated using the replica exchange molecular dynamics model with the water molecules being treated explicitly. The results show that the folding of the FSD-1 is initiated by the hydrophobic collapse, which is accompanied with the formation of the C-terminal alpha-helix. Then the folding proceeds with the formation of the beta-hairpin and the further package of the hydrophobic core. Compared with the beta-hairpin, the alpha-helix has much higher stability. It is also found that the N-capping motif adopted by the FSD-1 contributes to the stability of the alpha-helix dramatically. The hydrophobic contacts made by the side chain of Tyr3 in the native state are essential for the stabilization of the beta-hairpin. It is also found that the folding of the N-terminal beta-hairpin and the C-terminal alpha-helix exhibits weak cooperativity, which is consistent with the experimental data. Meanwhile, the folding pathway is compared between the FSD-1 and the target zinc finger peptide, and the possible role of the zinc ion on the folding pathway of zinc finger is proposed. Proteins 2007. (c) 2007 Wiley-Liss, Inc.

Structural study of the zinc and cadmium complexes of a type 2 plant (Quercus suber) metallothionein: Insights by vibrational spectroscopy

Zn- and Cd-complexes of Quercus suber metallothionein (QsMT) were obtained by in vivo-synthesis, in order to obtain physiologically representative aggregates, and characterized by spectrometric and spectroscopic methods. The secondary structure elements and the coordination environments of the metal binding sites of the two aggregates were determined, as well as the main metal-containing species formed. The results obtained from the analysis of the Raman and IR spectra reveal that these metal-MT complexes predominantly contain beta-sheet elements (about 60%), whereas they lack alpha-helices. These structural features slightly depend on the divalent metal bound. In particular, Cd(II) binding to QsMT induces a slight increase of the beta-sheet percentage, as well as a decrease in beta-turn elements with respect to Zn(II) binding. Conversely, the in vivo capability of QsMT to inglobe metal and sulfide ions is metal-depending. Spectroscopic vibrational data also confirm the presence of sulfide ligands in the metal clusters of both Zn- and Cd-QsMT, while the participation of the spacer His residue in metal coordination was only found in Cd-QsMT, in agreement with the CD results. Overall data suggest different coordination environments for Zn(II) and Cd(II) ions in QsMT.

Zinc binding to a regulatory zinc-sensing domain monitored in vivo by using FRET

We have generated probes of metal binding to zinc fingers (ZFs) that provide tools to study zinc trafficking in vivo. In this study, we used these probes to examine zinc binding by the Zap1 transcription factor of Saccharomyces cerevisiae. Zap1 contains two zinc-regulated activation domains (ADs), AD1 and AD2. AD2 is located within two C2H2 ZFs, ZF1 and ZF2. Studies have indicated that apoAD2 activates transcription and zinc binding to ZF1 and that ZF2 forms an interacting-finger-pair structure that is necessary to inhibit AD function. A related structural finger pair, ZF3 and ZF4, is found in the Zap1 DNA binding domain. In vitro studies indicated that, although the ZF1/2 and ZF3/4 finger pairs bind zinc with similar affinities, zinc that was bound to ZF1/2 was much more labile. We examined the properties of Zap1 ZFs in vivo by FRET. ZF pairs were flanked by enhanced yellow fluorescent protein and enhanced cyan fluorescent protein, allowing detection of zinc-induced conformation changes by FRET. By using these reporters, we found that ZF1/2 and ZF3/4 showed similar responses to zinc under steady-state conditions in vivo. In contrast, ZF1/2 zinc binding was significantly more labile than was ZF3/4. Also, ZF1/2 accumulated in an apo form that could rapidly bind zinc, whereas the ZF3/4 pair did not. Last, we show that these properties are evolutionarily conserved indicating their importance to Zap1 function. These results indicate that the kinetic lability of ZF1/2 in vivo is a key component of Zap1 zinc responsiveness.

Room-Temperature Wurtzite ZnS Nanocrystal Growth on Zn Finger-like Peptide Nanotubes by Controlling Their Unfolding Peptide Structures

ZnS nanocrystal, a class of wide-gap semiconductors, has shown interesting optical, electrical, and optoelectric properties via quantum confinement. For those applications, phase controls of ZnS nanocrystals and nanowires were critical to tune their physical properties to the appropriate ones. The wurtzite ZnS nanocrystal growth at room temperature is the useful fabrication; however, the most stable ZnS structure in nanoscale is the zinc blende (cubic) structure, and scientists have just begun exploring the room-temperature synthesis of the wurtzite (hexagonal) structure of ZnS nanocrystals. In this report, we applied the Zn finger-like peptides as templates to control the phase of ZnS nanocrystals to the wurtzite structure at room temperature. The peptide nanotubes, consisting of a 20 amino acids (VAL-CYS-ALA-THR-CYS-GLU-GLN-ILE-ALA-ASP-SER-GLN-HIS-ARG-SER-HIS-ARG-GLN-MET-VAL, M1 peptide) synthesized based on the peptide motif of the Influenza Virus Matrix Protein M1, could grow the wurtzite ZnS nanocrystals on the nanotube templates in solution. In the M1 protein, the unfolding process of the helical peptide motif via pH change creates a linker region between N- and C-terminated helical domains that contains a Zn finger-like Cys2His2 motif. Because the higher pH increases the uptake of Zn ions in the Cys2His2 motif of the M1 peptide by unfolding more helical domains, the pH change can essentially control the size and the number of the nucleation sites in the M1 peptides to grow ZnS nanocrystals with desired phases. Here we optimized the nucleation sites in the M1 peptides by unfolding them via pH change to obtain highly monodisperse and crystalline wurtzite ZnS nanocrystals on the template nanotubes at room temperature. This type of peptide-induced biomineralization technique will provide a clean and reproducible method to produce semiconductor nanotubes due to its efficient nanocrystal formation, and the band gaps of resulting nanotubes can also be tuned simply by phase control of ZnS nanocrystal coatings via the optimization of the unfolding peptide structures.

Copper Reduction by the Octapeptide Repeat Region of Prion Protein: pH Dependence and Implications in Cellular Copper Uptake†

The physiological function of the prion protein (PrP) remains enigmatic despite its established involvement in the pathogenesis of spongiform encephalopathies. PrP is a glycolipid-anchored membrane protein, which constitutively recycles between the cell surface and an endosomal compartment. The N-terminal region of PrP contains a four tandem repeat (OP4) of the octapeptide PHGGGWGQ (OP) that binds and reduces Cu(II) ions. We have examined the kinetic properties of the OP4-mediated Cu(II) reduction and found that OP4 exhibits the highest reduction activity around pH 6.5, close to the pH in early endosomes. All four OP units and at least one tryptophan side chain are essential for Cu(II) reduction. The reaction is described by an uncompetitive substrate inhibition mechanism involving a 1:1 Cu(II)-OP4 active intermediate. Structural analysis by Raman spectroscopy has revealed that the Cu(II) ion is coordinated by four histidine Ntau atoms in the active intermediate and the feasibility of formation of this intermediate correlates with the Cu(II) reduction over a pH range from 5.0 to 8.2. Molecular mechanics calculations suggest that two tryptophan residues of OP4 are located near the Cu(II) site, being consistent with the importance of redox-active tryptophan in the Cu(II) reduction. PrP has been proposed to capture Cu(II) ions in the extracellular space and release them in the endosome. The results of this study strongly suggest that PrP also plays a role in the reduction of captured Cu(II) ions prior to their transfer to Cu(I)-specific intracellular copper trafficking proteins.

On the Competition for Available Zinc

Extended x-ray absorption fine structure (EXAFS) spectroscopy was combined with thermodynamic and kinetic approaches to investigate zinc binding to a zinc finger (C2H2) and a tetrathiolate (C4) peptide. Both peptides represent structural zinc sites of proteins and rapidly bind a single zinc ion with picomolar dissociation constants. In competition with EDTA the transfer of peptide-bound zinc ions proved to be 6 orders of magnitude faster than predicted for a dissociation-association mechanism thus requiring ligand exchange mechanisms via peptide-zinc-EDTA complexes. EXAFS spectra of C2H2 showed the expected Cys2His2-ligand geometry when fully loaded with zinc. For a 2-fold excess of peptide, however, the existence of zinc-bridged peptide-peptide complexes with dominating sulfur coordination could be clearly shown. Whereas zinc binding kinetics of C2H2 appeared as a simple second order process, the suggested mechanism for C4 comprises a zinc-bridged Zn-(C4)2 species as well as a Zn-C4 species with less than 4 metal-bound thiolates, which is supported by EXAFS results. A rapid equilibrium of bound and unbound states of individual ligands might explain the kinetic instability of zinc-peptide complexes, which enables fast ligand exchange during the encounter of occupied and unoccupied acceptor sites. Depending on relative concentrations and stabilities, this results in a rapid transfer of zinc ions in the virtual absence of free zinc ions, as seen for the zinc transfer to EDTA, or in the formation of zinc-bridged complexes, as seen for both peptides with excess of peptides over available zinc.

Copper selectively triggers beta-sheet assembly of an N-terminally truncated amyloid beta-peptide beginning with Glu3

Metal ions have been suggested to induce aggregation of amyloid beta-peptide (Abeta), which is a key event in Alzheimer's disease. However, direct evidence that specific metal-peptide interactions are responsible for the amyloid formation has not previously been provided. Here we present the first example of the metal-induced amyloid formation by an Abeta fragment, which exhibits a clear-cut dependence on the amino acid sequence. A heptapeptide, EFRHDSG, corresponding to the amino acid residues 3-9 of Abeta (Abeta(3-9)) undergoes a conformational transition from irregular to beta-sheet and self-associates into insoluble aggregates upon Cu(II) binding. A Raman spectrum analysis of the Cu(II)-Abeta(3-9) complex and aggregation assays of mutated Abeta(3-9) peptides demonstrated that a concerted Cu(II) coordination of the imidazole side chain of His6, the carboxyl groups of Glu3 and Asp7, and the amino group at the N-terminus is essential for the amyloid formation. Although Abeta(1-9) and Abeta(2-9) also contain the metal binding sites, neither of these peptides forms amyloid depositions in the presence of Cu(II). The results of this study may not only provide new insight into the mechanism of amyloid formation, but also be important as a step toward the construction of proteinaceous materials with a specific function under the control of Cu(II).

Raman structural markers of tryptophan and histidine side chains in proteins

The Raman spectrum of a protein contains a wealth of information on the structure and interaction of the protein. To extract the structural information from the Raman spectrum, it is necessary to identify and interpret the marker bands that reflect the structure and interaction in the protein. Recently, new Raman structural markers have been proposed for the tryptophan and histidine side chains by examining the spectra-structure correlations of model compounds. Raman structural markers are now available for the conformation, hydrogen bonding, hydrophobic interaction, and cation-pi interaction of the indole ring of Trp. For His, protonation, tautomerism, and metal coordination of the imidazole ring can be studied by using Raman markers. The high-resolution X-ray crystal structures of proteins provide the basis for testing and modifying the Raman structural markers of Trp and His. The structures derived from Raman spectra are generally consistent with the X-ray crystal structures, giving support for the applicability of most Raman structural makers. Possible modifications and limitations to some marker bands are also discussed.

First-second shell interactions in metal binding sites in proteins: a PDB survey and DFT/CDM calculations

The role of the second shell in the process of metal binding and selectivity in metalloproteins has been elucidated by combining Protein Data Bank (PDB) surveys of Mg, Mn, Ca, and Zn binding sites with density functional theory/continuum dielectric methods (DFT/CDM). Peptide backbone groups were found to be the most common second-shell ligand in Mg, Mn, Ca, and Zn binding sites, followed (in decreasing order) by Asp/Glu, Lys/Arg, Asn/Gln, and Ser/Thr side chains. Aromatic oxygen- or nitrogen-containing side chains (Tyr, His, and Trp) and sulfur-containing side chains (Cys and Met) are seldom found in the second coordination layer. The backbone and Asn/Gln side chain are ubiquitous in the metal second coordination layer as their carbonyl oxygen and amide hydrogen can act as a hydrogen-bond acceptor and donor, respectively, and can therefore partner practically every first-shell ligand. The second most common outer-shell ligand, Asp/Glu, predominantly hydrogen bonds to a metal-bound water or Zn-bound histidine and polarizes the H-O or H-N bond. In certain cases, a second-shell Asp/Glu could affect the protonation state of the metal ligand. It could also energetically stabilize a positively charged metal complex more than a neutral ligand such as the backbone and Asn/Gln side chain. As for the first shell, the second shell is predicted to contribute to the metal selectivity of the binding site by discriminating between metal cations of different ionic radii and coordination geometries. The first-shell-second-shell interaction energies decay rapidly with increasing solvent exposure of the metal binding site. They are less favorable but are of the same order of magnitude as compared to the respective metal-first-shell interaction energies. Altogether, the results indicate that the structure and properties of the second shell are dictated by those of the first layer. The outer shell is apparently designed to stabilize/protect the inner-shell and complement/enhance its properties.

Zinc- and pH-dependent conformational transition in a putative interdomain linker region of the influenza virus matrix protein M1

The matrix protein M1 of influenza A virus forms a shell beneath the viral envelope and sustains the virion architecture by interacting with other viral components. A structural change of M1 upon acidification of the virion interior in an early stage of virus infection is considered to be a key step to virus uncoating. We examined the structure of a 28-mer peptide (M1Lnk) representing a putative linker region between the N- and C-terminal domains of M1 by using circular dichroism, Raman, and absorption spectroscopy. M1Lnk assumes an alpha-helical structure in a mildly hydrophobic environment irrespective of pH, being consistent with the X-ray crystal structures of an N-terminal fragment of M1 at pH 7 and 4. In the presence of Zn(2+), on the other hand, M1Lnk takes a partially unfolded conformation at neutral pH with a tetrahedral coordination of two Cys residues and two His residues to a Zn(2+) ion in the central part of the peptide. Upon acidification, the peptide releases the Zn(2+) ion and refolds into the alpha-helix-rich structure with a midpoint of transition at pH 5.9. The pH-dependent conformational transition of M1Lnk strongly suggests that the interdomain linker region of M1 also undergoes a pH-dependent unfolding-refolding transition in the presence of Zn(2+). A small but significant portion of the M1 protein is bound to Zn(2+) in the virion, and the Zn(2+)-bound M1 molecule may play a special role in virus uncoating by changing the disposition of the N- and C-terminal domains upon acidification of the virion interior.

Contribution of individual zinc ligands to metal binding and peptide folding of zinc finger peptides

Little is known about the contribution of individual zinc-ligating amino acid residues for coupling between zinc binding and protein folding in zinc finger domains. To understand such roles of each zinc ligand, four zinc finger mutant peptides corresponding to the second zinc finger domain of Sp1 were synthesized. In the mutant peptides, glycine was substituted for one of four zinc ligands. Their metal binding and folding properties were spectroscopically characterized and compared to those of the native zinc finger peptide. In particular, the electronic charge-transfer and d-d bands of the Co(II)-substituted peptide complexes were used to examine the metal coordination number and geometry. Fluorescence emission studies revealed that the mutant peptides are capable of binding zinc despite removing one ligand. Circular dichroism results clearly showed the induction of an alpha-helix by zinc binding. In addition, the structures of certain mutant zinc finger peptides were simulated by molecular dynamics calculation. The information indicates that His23 and the hydrophobic core formed between the alpha-helix and the beta-sheet play an essential role in alpha-helix induction. This report demonstrates that each ligand does not contribute equally to alpha-helix formation and coordination geometry in the zinc finger peptide.

Factors governing the protonation state of cysteines in proteins: an Ab initio/CDM study

The detailed mechanism of metal-cysteine binding is still poorly understood. It is not clear if every metal cation can induce cysteine deprotonation, how the dielectric medium affects this process, and the extent to which other ligands from the metal's first and second coordination shell influence cysteine ionization. It is also not clear if the zinc cation, with its positive charge reduced by charge transfer from the first two bound cysteinates, could still assist deprotonation of the next one or two cysteines in Cys3His and Cys4 zinc-finger cores. Here, we elucidate the factors governing the cysteine protonation state in metal-binding sites, in particular in Zn.Cys4 complexes, using a combined ab initio and continuum dielectric approach. Transition metal dications such as Zn2+ and Cu2+ and trivalent cations such as Al3+ with pronounced ability to accept charge from negatively charged Cys- are predicted to induce cysteine deprotonation, but not "hard" divalent cations such as Mg2+. A high dielectric medium was found to favor cysteine deprotonation, while a low one favored the protonated state. Polarizable ligands in the metal's first shell that can competitively donate charge to the metal cation were found to lower the efficiency of the metal-assisted cysteine deprotonation. The calculations predict that the zinc cation could assist deprotonation of all the cysteines during the folding of Cys4 zinc-finger cores and the [Zn.(Cys-)4]2- state is likely to be preserved in the final folded conformation of the protein provided the binding site is tightly encapsulated by backbone peptide groups or lysine/arginine side chains, which stabilize the ionized cysteine core.

Inhibitory effect of copper(II) on zinc(II)-induced aggregation of amyloid beta-peptide

Aggregation of amyloid beta-peptide (Abeta), a key pathological event in Alzheimer's disease, has been shown in vitro to be profoundly promoted by Zn(II). This fact suggests that some factors in the normal brain protect Abeta from the Zn(II)-induced aggregation. We demonstrate for the first time that Cu(II) effectively inhibits the Abeta aggregation by competing with Zn(II) for histidine residues. The Raman spectrum of a metal-Abeta complex in the presence of both Zn(II) and Cu(II) shows that the cross-linking of Abeta through binding of Zn(II) to the N(tau) atom of histidine is prevented by chelation of Cu(II) by the N(pi) atom of histidine and nearby amide nitrogens. The inhibitory effect is strongest at a Cu/Abeta molar ratio of around 4. Above this ratio, Cu(II) itself promotes the Abeta aggregation by binding to the phenolate oxygen of Tyr10. These results emphasize the importance of regulation of Cu(II) levels to inhibit Abeta aggregation, and are consistent with an altered metal homeostasis in Alzheimer's disease.

Cloning and characterization of adenylate kinase from Chlamydia pneumoniae

Chlamydiae proliferate only within the infected host cells and are thought to be "energy parasites," because they take up ATP from the host cell as an energy source. In the present study, we isolated from Chlamydia pneumoniae the gene encoding adenylate kinase (AK). Using the enzyme produced in Escherichia coli, its properties were characterized. K(m) values for AMP and for ADP of the purified C. pneumoniae AK (AKcpn) were each 330 microm, which is significantly higher than the reported values of other AKs, whereas K(m) for ATP was 24 microm, which was rather lower than others. AKcpn contains 1 g atom of zinc/mol of 24,000-dalton protein. Mass spectrometric analysis of AKcpn and analysis of properties of mutated AKcpn strongly suggested that zinc is associated with four cysteine residues in the LID domain of the enzyme. The apo-AKcpn that lost zinc retained AK activity, although K(m) for AMP of apo-AKcpn increased about 2-fold and V(max) decreased about one-half from that of holo-AKcpn. The apo-AKcpn was more thermolabile and sensitive to trypsin digestion than the holo-AKcpn. Moreover, the recovery in vitro of the AK activity during the renaturation process of the denatured apo-AKcpn was dependent on zinc. A mutated protein in which cysteine residues in the LID domain were substituted by other amino acids lost both zinc and enzyme activity. The mutated protein was more sensitive to protease than the apo-AKcpn. These results indicate that zinc in AKcpn, although not essential for the catalysis, stabilizes the enzyme and probably plays a crucial role in proper folding of the protein. Furthermore, the catalytic properties of AKcpn suggest a distinctive regulatory mechanism in the metabolism compared with AKs in other organisms.

NMR identification of heavy metal-binding sites in a synthetic zinc finger peptide: toxicological implications for the interactions of xenobiotic metals with zinc finger proteins

Lead (Pb), mercury (Hg), and cadmium (Cd) are toxic and interfere with protein metal-binding sites. The Cys(2)/His(2) zinc finger is a structural motif required for sequence-specific DNA binding and is present in zinc finger transcription factors (ZFP): Sp1, Egr-1, and TFIIIA. Neurotoxic studies have shown that heavy metals directly inhibit the DNA binding of ZFP and result in adverse cellular effects. Recently, we demonstrated the ability of heavy metals to alter the DNA binding of a synthetic Cys(2)/His(2) finger peptide (Razmiafshari and Zawia, Toxicol. Appl. Pharmacol. 166, 1-12, 2000). To determine the precise site of interactions between heavy metals and this protein domain, Pb, Hg, Cd, and Ca were reconstituted with the synthetic apopeptide and studied by one- and two-dimensional NMR spectroscopy. In the presence of Zn, Cd, Hg, and Pb, but not Ca, distinct peptide NMR signal changes in the aliphatic region were observed and attributed to metal-cystiene interactions. However, chemical shifts indicative of metal-histidine binding were elicited by all the metals in the peptide's aromatic region. Chemical shift assignments and sequential connectivity were established in the presence and absence of Zn, Pb, and Ca through TOCSY and NOESY spectra. Cysteine and histidine residues showed a distinct change in their amide and beta resonances in the presence of Zn and Pb, suggesting the metal-ligand binding sites were near these residues. However, Ca led to no significant spectral changes in these regions, suggesting that it is not actively involved in the binding site. These studies reveal this structure as a mediator of metal-induced alterations in protein function.

DNA recognition by Cys2His2 zinc finger proteins

Cys2His2 zinc fingers are one of the most common DNA-binding motifs found in eukaryotic transcription factors. These proteins typically contain several fingers that make tandem contacts along the DNA. Each finger has a conserved beta beta alpha structure, and amino acids on the surface of the alpha-helix contact bases in the major groove. This simple, modular structure of zinc finger proteins, and the wide variety of DNA sequences they can recognize, make them an attractive framework for attempts to design novel DNA-binding proteins. Several studies have selected fingers with new specificities, and there clearly are recurring patterns in the observed side chain-base interactions. However, the structural details of recognition are intricate enough that there are no general rules (a "recognition code") that would allow the design of an optimal protein for any desired target site. Construction of multifinger proteins is also complicated by interactions between neighboring fingers and the effect of the intervening linker. This review analyzes DNA recognition by Cys2His2 zinc fingers and summarizes progress in generating proteins with novel specificities from fingers selected by phage display.

Raman and IR spectroscopic investigation of zinc(II)-carnosine complexes

The zinc(II)-L-carnosine system was investigated at different pH and metal/ligand ratios by Raman and IR spectroscopy. The Raman and IR spectra present some marker bands useful to identify the sites involved in metal chelation at a specific pH value. In particular, the neutral imidazole group gives rise to some Raman bands, such as the nu C(4)===C(5) band, that change in wave number, depending on whether the imidazole ring takes the tautomeric form I or II. Even if tautomer I is predominant in the free ligand, metal coordination can upset tautomeric preference and N(tau)- and N(pi)-ligated complexes can be identified. Although weak compared to those of aromatic residues, these Raman marker bands may be useful in analyzing metal-histidine interaction in peptides and proteins. On the basis of the vibrational results, conclusions can be drawn on the species existing in the system. Depending on the available nitrogen atoms, various complexes can be formed and the prevalent form of the species depends mainly on the pH. At basic pH carnosine gives rise to two different neutral complexes: a water-insoluble polymeric species, [ZnH(-1)L](0)(n), and a dimer, [Zn(2)H(-2)L(2)](0). The first is predominant and involves the tautomeric I form of the imidazole ring in metal chelation; the second contains tautomer II and increases its percentage by going from a 2 to 0.25 metal/ligand ratio. Conversely, the dimeric species dominates at pH 7, whereas two charged species, [ZnHL](2+) and [ZnL](+), are formed under slightly acidic conditions. In the [ZnHL](2+) complex the imidazole ring takes part in the Zn(II) coordination in the tautomeric I form, whereas in [ZnL](+) the ring is protonated and not bound to the Zn(II) ion. In addition, the curve fitting analysis of the 1700-1530 cm(-1) Raman region was helpful in indicating the predominant species at each pH.

The third zinc finger of TFIIIA stabilizes a hairpin structure of the non-coding strand in the internal control region of 5S RNA gene

The structures of non-coding and coding strands in box C of the internal control region (ICR) of Xenopus laevis somatic 5S RNA gene have been examined by circular dichroism (CD) and Raman spectroscopy in the absence and presence of the third zinc finger of transcription factor IIIA (TFIIIA), which binds to the ICR. The non-coding strand exhibits CD signals assignable to a hairpin and an unfolded structure. The presence of the hairpin structure is supported by Raman spectra, gel electrophoresis, and nucleotide deletion experiments. Binding of the zinc finger to the non-coding strand increases the CD signal of hairpin structure, indicating stabilization of the hairpin structure by the zinc finger. In contrast, the corresponding coding strand remains unfolded even in the presence of the zinc finger. The TFIIIA-ICR complex is not only required for initiation of transcription but also lasts during many rounds of transcription of the 5S RNA gene including the ICR (Bogenhagen et al., Cell 28 (1982) 413). TFIIIA may play a role in promoting the transcription by maintaining the unwound non-coding strand in the hairpin structure and leaving the coding strand available for transcription by RNA polymerase.