Potential problems with fluorescein diacetate assays of cell viability when testing natural products for antimicrobial activity

Proving the Antimicrobial Therapeutic Activity on a New Copper-Thiosemicarbazone Complex

The misuse and overdose of antimicrobial medicines are fostering the emergence of novel drug-resistant pathogens, providing negative repercussions not only on the global healthcare system due to the rise of long-term or chronic patients and inefficient therapies but also on the world trade, productivity, and, in short, to the global economic growth. In view of these scenarios, novel action plans to constrain this antibacterial resistance are needed. Thus, given the proven antiproliferative tumoral and microbial features of thiosemicarbazone (TSCN) ligands, we have here synthesized a novel effective antibacterial copper-thiosemicarbazone complex, demonstrating both its solubility profile and complex stability under physiological conditions, along with their safety and antibacterial activity in contact with human cellular nature and two most predominant bacterial strains, respectively. A significant growth inhibition (17% after 20 h) is evidenced over time, paving the way toward an effective antibacterial therapy based on these copper-TSCN complexes.

Transthyretin-Penetratin: A Potent Fusion Protein Inhibitor against Alzheimer's Amyloid-β Fibrillogenesis with High Blood Brain Barrier Crossing Capability

The design of a potent amyloid-β protein (Aβ) inhibitor plays a pivotal role in the prevention and treatment of Alzheimer's disease (AD). Despite endogenous transthyretin (TTR) being recognized as an Aβ inhibitor, the weak inhibitory and blood brain barrier (BBB) crossing capabilities hinder it for Aβ aggregation inhibition and transport. Therefore, we have herein designed a recombinant TTR by conjugating a cationic cell penetrating peptide (penetratin, Pen), which not only enabled the fusion protein, TTR-Pen (TP), to present high BBB penetration but also greatly enhanced the potency of Aβ inhibition. Namely, the protein fusion made TP positively charged, leading to a potent suppression of Aβ40 fibrillization at a low concentration (1.5 μM), while a TTR concentration as high as 12.5 μM was required to gain a similar function. Moreover, TP could mitigate Aβ-induced neuronal death, increase cultured cell viability from 72% to 92% at 2.5 μM, and extend the lifespan of AD nematodes from 14 to 18 d. Thermodynamic studies revealed that TP, enriched in positive charges, presented extensive electrostatic interactions with Aβ40. Importantly, TP showed excellent BBB penetration performance, with a 10 times higher BBB permeability than TTR, which would allow TP to enter the brain of AD patients and participate in the transport of Aβ species out of the brain. Thus, it is expected that the fusion protein has great potential for drug development in AD treatment.

The cadmium tolerance enhancement through regulating glutathione conferred by vacuolar compartmentalization in Aspergillus sydowii

Aspergillus was found to be a vital hyperaccumulation species for heavy metal removal with admirable tolerance capacity. But the potential tolerance mechanism has not been completely studied. This study quantified the amounts of total cadmium (Cd), Cd2+, glutathione (GSH), and reactive oxygen species (ROS) in the protoplasts and vacuoles of mycelium. We modulated GSH synthesis using buthionine sulfoximine (BSO) and 2-oxothiazolidine-4-carboxylic acid (OTC) to investigate the subcellular regulatory mechanisms of GSH in the accumulation of Cd. The results confirmed that GSH plays a crucial role in vacuolar compartmentalization under Cd stress. GSH and GSSG as a redox buffer to keep the cellular redox state in balance and GSH as a metal chelating agent to reduce toxicity. When regulating the decreased GSH content with BSO, and increased GSH content with OTC, the system of Cd-GSH-ROS can change accordingly, this also supported that vacuolar compartmentalization is a detoxification strategy that can modulate the transport and storage of substances inside and outside the vacuole reasonably. Interestingly, GSH tended to be distributed in the cytoplasm, the battleground of redox takes place in the cytoplasm but not in the vacuole. These finding potentially has implications for the understanding of tolerance behavior and detoxification mechanisms of cells. In the future bioremediation of Cd in soil, the efficiency of soil remediation can be improved by developing organisms with high GSH production capacity.

Design of Self-Assembled Nanoparticles as a Potent Inhibitor and Fluorescent Probe for β-Amyloid Fibrillization

Alzheimer's disease (AD) remains incurable due to its complex pathogenesis. The deposition of β-amyloid (Aβ) in the brain appears much earlier than any clinical symptoms and plays an essential role in the occurrence and development of AD neuropathology, which implies the importance of early theranostics. Herein, we designed a self-assembled bifunctional nanoparticle (LC8-pCG-fLC8) for Aβ fluorescent diagnosis and inhibition. The nanoparticle was synthesized by click chemistry from Aβ-targeting peptide Ac-LVFFARKC-NH2 (LC8) and an Aβ fluorescent probe f with the zwitterionic copolymer poly(carboxybetaine methacrylate-glycidyl methacrylate) (p(CBMA-GMA), pCG). Owing to the high reactivity of epoxy groups, the peptide concentration of LC8-pCG-fLC8 nanoparticles reached about 4 times higher than that of the existing inhibitor LVFFARK@poly(carboxybetaine) (LK7@pCB). LC8-pCG-fLC8 exhibited remarkable inhibitory capability (suppression efficiency of 83.0% at 20 μM), altered the aggregation pathway of Aβ, and increased the survival rate of amyloid-induced cultured cells from 76.5% to 98.0% at 20 μM. Notably, LC8-pCG-fLC8 possessed excellent binding affinity, good biostability, and high fluorescence responsivity to β-sheet-rich Aβ oligomers and fibrils, which could be used for the early diagnosis of Aβ aggregation. More importantly, in vivo tests using transgenic C. elegans CL2006 stain showed that LC8-pCG-fLC8 could specifically image Aβ plaques, prolong the lifespan (from 13 to 17 days), and attenuate the AD-like symptoms (reducing paralysis and Aβ deposition). Therefore, self-assembled nanoparticles hold great potential in AD theranostics.

Enhancement of triterpene production via in situ extractive fermentation of Sanghuangporus vaninii YC-1

There have been many studies on the activities and polysaccharide production of Sanghuangporus vaninii. However, few studies have looked at triterpene production from S. vaninii using liquid-state fermentation. A method for enhancing the production of triterpenes by in situ extractive fermentation (ISEF) was studied. Eight solvents were investigated as extractants for triterpene production in the ISEF system. The results showed that using vegetable oil as an extractant significantly increased the yield of total triterpenes and biomass of S. vaninii YC-1, reaching 18.98 ± 0.71 and 44.67 ± 2.21 g/L, respectively. In 5 L fermenter experiments, the added vegetable oil improved the dissolved oxygen condition of the fermentation broth and promoted the growth of S. vaninii YC-1. Furthermore, adding vegetable oil increased the expression of fatty acid synthesis-related genes such as FAD2 and SCD, thereby increasing the synthesis of unsaturated fatty acids in the cell membrane of S. vaninii YC-1. Therefore, the cell membrane permeability of S. vaninii YC-1 increased by 19%. Our results indicated that vegetable oil increased the permeability of S. vaninii YC-1 cell membranes to promote the production of total triterpenes. The use of vegetable oil as an extractant was thus effective in increasing the yield of triterpenes in the ISEF system.

Oxidoreduction potential controlling for increasing the fermentability of enzymatically hydrolyzed steam-exploded corn stover for butanol production

Background

Lignocellulosic biomass is recognized as an effective potential substrate for biobutanol production. Though many pretreatment and detoxification methods have been set up, the fermentability of detoxicated lignocellulosic substrate is still far lower than that of starchy feedstocks. On the other hand, the number of recent efforts on rational metabolic engineering approaches to increase butanol production in Clostridium strains is also quite limited, demonstrating the physiological complexity of solventogenic clostridia. In fact, the strain performance is greatly impacted by process control. developing efficient process control strategies could be a feasible solution to this problem.

Results

In this study, oxidoreduction potential (ORP) controlling was applied to increase the fermentability of enzymatically hydrolyzed steam-exploded corn stover (SECS) for butanol production. When ORP of detoxicated SECS was controlled at − 350 mV, the period of fermentation was shortened by 6 h with an increase of 27.5% in the total solvent (to 18.1 g/L) and 34.2% in butanol (to 10.2 g/L) respectively. Silico modeling revealed that the fluxes of NADPH, NADH and ATP strongly differed between the different scenarios. Quantitative analysis showed that intracellular concentrations of ATP, NADPH/NADP⁺, and NADH/NAD⁺ were increased by 25.1%, 81.8%, and 62.5%. ORP controlling also resulted in a 2.1-fold increase in butyraldehyde dehydrogenase, a 1.2-fold increase in butanol dehydrogenase and 29% increase in the cell integrity.

Conclusion

ORP control strategy effectively changed the intracellular metabolic spectrum and significantly improved Clostridium cell growth and butanol production. The working mechanism can be summarized into three aspects: First, Glycolysis and TCA circulation pathways were strengthened through key nodes such as pyruvate carboxylase [EC: 6.4.1.1], which provided sufficient NADH and NADPH for the cell. Second, sufficient ATP was provided to avoid “acid crash”. Third, the key enzymes activities regulating butanol biosynthesis and cell membrane integrity were improved.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01824-2.

Potential of Impedance Flow Cytometry to Assess the Viability and Quantity of Cannabis sativa L. Pollen

Over the last decade, efforts to breed new Cannabis sativa L. cultivars with high Cannabidiol (CBD) and other non-psychoactive cannabinoids with low tetrahydrocannabinol (THC) levels have increased. In this context, the identification of the viability and quantity of pollen, which represents the fitness of male gametophytes, to accomplish successful pollination is of high importance. The present study aims to evaluate the potential of impedance flow cytometry (IFC) for the assessment of pollen viability (PV) and total number of pollen cells (TPC) in two phytocannabinoid-rich cannabis genotypes, KANADA (KAN) and A4 treated with two different chemical solutions, silver thiosulfate solution (STS) and gibberellic acid (GA3). Pollen was collected over a period of 8 to 24 days after flowering (DAF) in a greenhouse experiment. Impedance flow cytometry (IFC) technology was used with Cannabis sativa to assess the viability and quantity of pollen. The results showed that the number of flowers per plant was highest at 24 DAF for both genotypes, A4 (317.78) and KAN (189.74). TPC induced by STS was significantly higher compared to GA3 over the collection period of 8 to 24 DAF with the highest mean TPC of 1.54 × 105 at 14 DAF. STS showed significantly higher viability of pollen compared to GA3 in genotype KAN, with the highest PV of 78.18% 11 DAF. Genotype A4 also showed significantly higher PV with STS at 8 (45.66%), 14 (77.88%), 18 (79.37%), and 24 (51.92%) DAF compared to GA3. Furthermore, counting the numbers of flowers did not provide insights into the quality and quantity of pollen; the results showed that PV was highest at 18 DAF with A4; however, the number of flowers per plant was 150.33 at 18 DAF and was thus not the maximum of produced flowers within the experiment. IFC technology successfully estimated the TPC and differentiated between viable and non-viable cells over a period of 8 to 24 DAF in tested genotypes of Cannabis sativa. IFC seems to be an efficient and reliable method to estimate PV, opening new chances for plant breeding and plant production processes in cannabis.

Polymeric ruthenium precursor as a photoactivated antimicrobial agent

Ruthenium coordination compounds have demonstrated a promising anticancer and antibacterial activity, but their poor water solubility and low stability under physiological conditions may limit their therapeutic applications. Physical encapsulation or covalent conjugation with polymers may overcome these drawbacks, but generally involve multistep reactions and purification processes. In this work, the antibacterial activity of the polymeric precursor dicarbonyldichlororuthenium (II) [Ru(CO)₂Cl₂]_n has been studied against Escherichia coli and Staphylococcus aureus. This Ru-carbonyl precursor shows minimum inhibitory concentration at nanogram per millilitre, which renders it a novel antimicrobial polymer without any organic ligands. Besides, [Ru(CO)₂Cl₂]_n antimicrobial activity is markedly boosted under photoirradiation, which can be ascribed to the enhanced generation of reactive oxygen species under UV irradiation. [Ru(CO)₂Cl₂]_n has been able to inhibit bacterial growth via the disruption of bacterial membranes and triggering upregulation of stress responses as shown in microscopic measurements. The activity of polymeric ruthenium as an antibacterial material is significant even at 6.6 ng/mL while remaining biocompatible to the mammalian cells at much higher concentrations. This study proves that this simple precursor, [Ru(CO)₂Cl₂]_n, can be used as an antimicrobial compound with high activity and a low toxicity profile in the context of need for new antimicrobial agents to fight bacterial infections.

Cadmium, nickel, copper, and zinc influence on microfilament organization in Arabidopsis root cells

The plant cytoskeleton orchestrates such fundamental processes in cells as division, growth and development, polymer cross-linking, membrane anchorage, etc. Here, we describe the influence of Cd²⁺ , Ni²⁺ , Zn²⁺ , and Cu²⁺ on root development and vital organization of actin filaments into different cells of Arabidopsis thaliana line expressing GFP-FABD2. CdSO₄ , NiSO₄ , CuSO₄ , and ZnSO₄ were used in concentrations of 5-20 µM in this study. It was found that Cd, Ni, and Cu cause dose-dependent primary root growth inhibition and alteration of the root morphology, whereas Zn slightly stimulates root growth and does not affect the morphology of Arabidopsis roots. This growth inhibition/stimulation correlated with the various sensitivities of microfilaments to Cd, Ni, Cu, and Zn action. It was established that Cd, Ni, and Cu affected predominantly the actin filaments of meristematic cells. Cells of transition and elongation zones demonstrated strong actin filament sensitivity to Cd and Cu. Microfilaments of elongating root cells were more sensitive to Ni and Cu. Although Cd, Ni, and Cu stimulated root hair growth after long-term treatment, actin filaments were destroyed after 1 h exposure with these metals. Zn did not disrupt native actin filament organization in root cells. Thus, our investigation shows that microfilaments act as sensitive cellular targets for Cd, Ni, and Cu. More data on effects on native actin filaments organization would contribute to a better understanding of plant tolerance mechanisms to the action of these metals.

Isoliquiritigenin Pretreatment Induces Endoplasmic Reticulum Stress-Mediated Hormesis and Attenuates Cisplatin-Induced Oxidative Stress and Damage in LLC-PK1 Cells

Isoliquiritigenin (IsoLQ) is a flavonoid with antioxidant properties and inducer of endoplasmic reticulum (ER) stress. In vitro and in vivo studies show that ER stress-mediated hormesis is cytoprotective; therefore, natural antioxidants and ER stress inducers have been used to prevent renal injury. Oxidative stress and ER stress are some of the mechanisms of damage involved in cisplatin (CP)-induced nephrotoxicity. This study aims to explore whether IsoLQ pretreatment induces ER stress and produces hormesis to protect against CP-induced nephrotoxicity in Lilly Laboratories Cell-Porcine Kidney 1 (LLC-PK1) cells. During the first stage of this study, both IsoLQ protective concentration and pretreatment time against CP-induced toxicity were determined by cell viability. At the second stage, the effect of IsoLQ pretreatment on cell viability, ER stress, and oxidative stress were evaluated. IsoLQ pretreatment in CP-treated cells induces expression of glucose-related proteins 78 and 94 kDa (GRP78 and GRP94, respectively), attenuates CP-induced cell death, decreases reactive oxygen species (ROS) production, and prevents the decrease in glutathione/glutathione disulfide (GSH/GSSG) ratio, free thiols levels, and glutathione reductase (GR) activity. These data suggest that IsoLQ pretreatment has a moderately protective effect on CP-induced toxicity in LLC-PK1 cells, through ER stress-mediated hormesis, as well as by the antioxidant properties of IsoLQ.

Determination of In Vitro Membrane Permeability by Analysis of Intracellular and Extracellular Fluorescein Signals in Renal Cells

BACKGROUND/AIM

The structural integrity of the eukaryotic cytoplasmic membrane is of crucial importance for its cell biological function and thus for the survival of the cell. Physical and chemical noxae can interact in various ways with components of the cytoplasmic membrane, influence its permeability and thus mediate toxic effects. In the study presented, changes in membrane permeability were quantified by intracellular accumulation of a fluorescent dye and by the release of the fluorescent dye from dye-loaded cells.

MATERIALS AND METHODS

Non-malignant (RC-124) and malignant (786-O, Caki-1) renal cells were permeabilized with different concentrations of Triton X-100. The permeability of the membrane was determined at the single-cell level by the uptake of the dye into the cell inner by flow cytometry. In addition, a fluorescence plate reader was used to detect and quantify the release of the dye into the cell culture supernatant.

RESULTS

Both malignant and non-malignant cells showed a dose-dependent alteration of membrane permeability after treatment with Triton X-100. In the presence of the fluorescent dye, significantly more dye was introduced into the permeabilized cells compared to control incubations. Vice versa, Triton X-100-treated and dye-loaded cells released significantly more dye into the cell culture supernatant.

CONCLUSION

The combination of measurement of intracellular accumulated and extracellular released dye can quantifiably detect changes in membrane permeability due to cell-membrane damage. The combination of two different measurement methods offers additional value in reliable detection of membrane-damaging, potentially toxic influences.

An increase in cell membrane permeability in the in situ extractive fermentation improves the production of antroquinonol from Antrodia camphorata S-29

The goals of this study were to increase the production of antroquinonol (AQ) and to elucidate the response mechanism of the cell membrane during the in situ extractive fermentation (ISEF) of Antrodia camphorata S-29. Through ISEF, the concentration of AQ reached a maximum of 146.1 ± 2.8 mg/L, which was approximately (7.4 ± 0.1)-fold that of the control (coenzyme Q0-induced fermentation). Transcriptome sequencing showed that four genes (FAD2, fabG, SCD, and FAS1) related to fatty acid biosynthesis were upregulated. FAD2 and SCD may regulate the increase in oleic acid (C18:1) and linoleic acid (C18:2) in the cell membrane of A. camphorata S-29, resulting in an increase in cell membrane permeability. AQ was successfully transferred to the n-tetradecane phase through the cell membrane, reducing product feedback inhibition and improving the production of AQ from A. camphorata S-29.

An Ag-loaded photoactive nano-metal organic framework as a promising biofilm treatment

Surface biofilm inhibition is still currently a considerable challenge. Among other organisms, Staphylococcus aureus is notable for its ability to form a strong biofilm with proved resistance to chemotherapy. Contamination of high-touch surfaces with S. aureus biofilm not only promotes disease spread but also generates tremendous health-associated costs. Therefore, development of new bactericidal and antiadhesive surface coatings is a priority. Considering that metal-organic frameworks (MOFs) have recently emerged as promising antibacterial agents, we originally report here the synthesis of a multi-active silver-containing nanoscaled MOF composite as a potential surface coating against S. aureus biofilm owing to a triple effect: intrinsic bactericide activity of the MOF, biocidal character of silver nanoparticles (AgNPs), and photoactivity after UVA irradiation. AgNPs were successfully entrapped within the benchmarked nanoscaled porous photoactive titanium(IV) aminoterephthalate MIL-125(Ti)NH₂ using a simple and efficient impregnation-reduction method. After complete characterization of the composite thin film, its antibacterial and anti-adherent properties were fully evaluated. After UVA irradiation, the composite coating exhibited relevant bacterial inhibition and detachment, improved ligand-to-cluster charge transfer, and steady controlled delivery of Ag⁺. These promising results establish the potential of this composite as an active coating for biofilm treatment on high-touch surfaces (e.g., surgical devices, door knobs, and rail bars). STATEMENT OF SIGNIFICANCE: Surface contamination due to bacterial biofilm formation is still a demanding issue, as it causes severe disease spread. One possible solution is the development of antifouling and antibacterial surface coatings. In this work, we originally propose the use of photoactive metal-organic frameworks (MOFs) for biofilm treatment. The novelty of this work relies on the following: i) the treatment of strongly contaminated surfaces, as previous studies with MOFs have exclusively addressed biofilm prevention; ii) this pioneering work reports both antiadherent effect, which removes the biofilm, and bacterial inhibition; iii) our original successful strategy has never been proposed thus far, involving the multi-active combination of 1) intrinsic antibacterial effect of a photoactive titanium-based nanoMOF, 2) immobilization of biocide silver nanoparticles, and 3) improved anti-bioadherent effect upon irradiation of the composite coating.

Measuring human carboxylesterase 2 activity in pancreatic cancer patient-derived xenografts using a ratiometric fluorescent chemosensor

Irinotecan-based therapy is a common treatment for pancreatic cancer. To elicit its anticancer activity, the drug requires first the hydrolysis action of the enzyme human carboxylesterase 2 (hCES2). It has been established that pancreatic cancer patients have various levels of hCES2, whereby patients having low levels respond poorer to Irinotecan than patients with higher levels, suggesting that hCES2 can be used to predict response. However, current methods that measure hCES2 activity are inaccurate, complex or lengthy, thus being incompatible for use in a clinical setting. Here, we developed a small molecule ratiometric fluorescent chemosensor that accurately measures hCES2 activity in a single-step within complex mixtures. Our chemosensor is highly selective for hCES2 over hCES1, cell permeable and can measure hCES2 activity in pancreatic cancer patient-derived xenografts. Given the simplicity, accuracy and tissue compatibility of our assay, we anticipate our chemosensor can be used to predict patient response to Irinotecan-based therapy.

Direct analysis of pollen fitness by flow cytometry: implications for pollen response to stress

Sexual reproduction in flowering plants depends on the fitness of the male gametophyte during fertilization. Because pollen development is highly sensitive to hot and cold temperature extremes, reliable methods to evaluate pollen viability are important for research into improving reproductive heat stress (HS) tolerance. Here, we describe an approach to rapidly evaluate pollen viability using a reactive oxygen species (ROS) probe dichlorodihydrofluorescein diacetate (i.e. H₂ DCFDA-staining) coupled with flow cytometry. In using flow cytometry to analyze mature pollen harvested from Arabidopsis and tomato flowers, we discovered that pollen distributed bimodally into 'low-ROS' and 'high-ROS' subpopulations. Pollen germination assays following fluorescence-activated cell sorting revealed that the high-ROS pollen germinated with a frequency that was 35-fold higher than the low-ROS pollen, supporting a model in which a significant fraction of a flower's pollen remains in a low metabolic or dormant state even after hydration. The ability to use flow cytometry to quantify ROS dynamics within a large pollen population was shown by dose-dependent alterations in DCF-fluorescence in response to oxidative stress or antioxidant treatments. HS treatments (35°C) increased ROS levels, which correlated with a ~60% reduction in pollen germination. These results demonstrate the potential of using flow cytometry-based approaches to investigate metabolic changes during stress responses in pollen.

Electrospun Poly(ε-caprolactone) Nanofibrous Mesh for Imiquimod Delivery in Melanoma Therapy

Drug delivery systems (DDS) are commonly employed to administer drug-loaded composites to their therapeutic targets both in vitro and in vivo. Thus, we herein report the study of imiquimod-poly(ε-caprolactone) (IMQ-PCL) nanofibrous meshes for application in melanoma therapy. The preparation route employed was based on the electrospinning technique, with the melanoma cells being cultured on electrospun nanofibrous meshes to study their biocompatibility. All parameters employed, including the flow rate and polymer solution concentration, were examined to gain an improved understanding of the factors influencing the diameter and morphology of the electrospun fibre. The optimised parameters were employed to produce 12 IMQ-PCL nanofibrous meshes with diameters ranging from 100 to 900 nm to the melanoma cell viability. The relationship between the fibrous diameter and the imiquimod release profile was also determined using UV-Vis spectroscopy. In addition, similar results were obtained for the simulated imiquimod release profile obtained by COMSOL Multiphysics®. The IMQ-PCL nanofibrous meshes were found to decrease cell viability by ≥50%, with the number of cells dropping by ~10% over 48 h. As the cell viability was affected by the release of imiquimod, we believe that IMQ-PCL nanofibrous meshes are a promising drug delivery system for application in melanoma therapy.

Toxicological interactions of ibuprofen and triclosan on biological activity of activated sludge

The growing use of pharmaceutical and personal care products increases their concentrations in the wastewater entering treatment plants and their levels into biological reactors. The most extended biological wastewater treatment is the activated sludge process. The toxicity of ibuprofen and triclosan, individually and combined, was studied by tracking the biological activity of the activated sludge measuring oxygen uptake rate and the inhibition of the esterase activity. Short-term exposure produced significant inhibition in oxygen uptake, with lower damage to enzymatic activity. Median effect values for oxygen uptake inhibition were 64±13mgL^-1 and 0.32±0.07mgL^-1 for ibuprofen and triclosan respectively using 125mgL^-1 activated sludge. For the inhibition of enzymatic activity values were 633±63mgL^-1 for ibuprofen and 1.94±0.32mgL^-1 for triclosan. Results indicated that oxygen uptake, related to primary activity of microorganisms, was more strongly affected than the enzymatic activity associated to energy consumption. Toxicity interactions were determined using the Combination Index-isobologram method. Results showed antagonism at lower values of affected population, after which the mixtures tended to additivity and synergism. For the case of enzymatic activity, the antagonism was less marked and the additivity range was higher.

Variation in Human Islet Viability Based on Different Membrane Integrity Stains

Membrane integrity fluorescent staining is used routinely to evaluate islet viability. Results are used as one of the determining factors in islet product release criteria, and are used to assess the efficacy of different culture conditions. Recently, it has been observed that there is variation in the viability staining of freshly isolated islets based on which viability assay is used. This investigation compares three membrane integrity stains for the viability assessment of isolated human islets. Fluorescein diacetate/propidium iodide (FDA/PI), the current standard method for assessing islet viability, demonstrates intense extracellular fluorescence, reducing the differential staining of intact islets. We further evaluated SYTO-13/ethidium bromide (SYTO/EB) and calcein AM/ethidium homodimer (C/EthD) as alternative viability assays, and found considerable variation between FDA/PI and either SYTO/EB or C/EthD staining. Preparations of human islets were obtained from cadaveric pancreata after collagenase digestion, mechanical separation, and purification by continuous Ficoll gradient centrifugation. For each preparation, two replicate samples of 50 islets were counted for each stain, and the percent viability calculated. The results for SYTO/EB and C/EthD were nearly identical [57.6 ± 7.3% and 57.9 ± 7.2%, respectively (mean ± SEM), N = 11]. FDA/PI-stained islets, however, showed consistently elevated values when compared to SYTO/EB. Accurate assessment of islet viability remains a critical determinant of islet product release. The discrepancies found between FDA/PI scoring and visual quality, compared with alternative stains, suggests that the FDA/PI stain may not be the optimal approach to assess islet viability.

Toxic effect of two kinds of mineral collectors on soil microbial richness and activity: analysis by microcalorimetry, microbial count, and enzyme activity assay

Flotation reagents are hugely and increasingly used in mining and other industrial and economic activities from which an important part is discharged into the environment. China could be the most affected country by the resulting pollution. However, their ecotoxicological dimension is still less addressed and understood. This study aimed to analyze the toxic effect of sodium isobutyl xanthate (SIBX) and sodium isopropyl xanthate (SIPX) to soil microbial richness and activity and to make a comparison between the two compounds in regard to their effects on soil microbial and enzymes activities. Different methods, including microcalorimetry, viable cell counts, cell density, and catalase and fluorescein diacetate (FDA) hydrololase activities measurement, were applied. The two chemicals exhibited a significant inhibitory effect (P < 0.05 or P < 0.01) to all parameters, SIPX being more adverse than SIBX. As the doses of SIBX and SIPX increased from 5 to 300 μg g^-1 soil, their inhibitory ratio ranged from 4.84 to 45.16 % and from 16.13 to 69.68 %, respectively. All parameters fluctuated with the incubation time (10-day period). FDA hydrolysis was more directly affected but was relatively more resilient than catalase activity. Potential changes of those chemicals in the experimental media and complementarity between experimental techniques were justified.

Prevention of colitis by controlled oral drug delivery of carbon monoxide

Carbon monoxide (CO) is an endogenous signal transmitter involved in numerous physiological processes including the gastrointestinal (GI) homeostasis. CO has been recognized as potential new therapeutic agent for motility related and inflammatory disorders of the GI tract. A therapeutic use, however, is challenged by inappropriate drug delivery modes. Here we describe a micro scale Oral Carbon Monoxide Release System (M-OCORS) designed for localized and controlled exposure of the GI tract with in situ generated CO. M-OCORS allowed for controlled release profiles lasting for several minutes or up to almost one day. These in vitro release profiles translated into a large pharmacokinetic design space following oral administration in mice and measured as CO-hemoglobin (CO-Hb) formation. M-OCORS with a release profile featuring exposure of the intestine was profiled in two independently performed studies demonstrating preventive effects in chemically induced colitis. M-OCORS significantly reduced damage scores and prevented upregulation of colitis biomarkers.

Mitochondrial uncouplers inhibit clathrin-mediated endocytosis largely through cytoplasmic acidification

ATP production requires the establishment of an electrochemical proton gradient across the inner mitochondrial membrane. Mitochondrial uncouplers dissipate this proton gradient and disrupt numerous cellular processes, including vesicular trafficking, mainly through energy depletion. Here we show that Endosidin9 (ES9), a novel mitochondrial uncoupler, is a potent inhibitor of clathrin-mediated endocytosis (CME) in different systems and that ES9 induces inhibition of CME not because of its effect on cellular ATP, but rather due to its protonophore activity that leads to cytoplasm acidification. We show that the known tyrosine kinase inhibitor tyrphostinA23, which is routinely used to block CME, displays similar properties, thus questioning its use as a specific inhibitor of cargo recognition by the AP-2 adaptor complex via tyrosine motif-based endocytosis signals. Furthermore, we show that cytoplasm acidification dramatically affects the dynamics and recruitment of clathrin and associated adaptors, and leads to reduction of phosphatidylinositol 4,5-biphosphate from the plasma membrane.

Plant cells maintain strict proton gradients over different membranes. Here, Dejonghe et al. show that several protonophores, including the known tyrosine kinase inhibitor TyrphostinA23, inhibit clathrin-mediated endocytosis by disturbing these gradients and causing cytoplasmic acidification.

Biocompatible Azide-Alkyne "Click" Reactions for Surface Decoration of Glyco-Engineered Cells

Bio-orthogonal copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC) has been widely used to modify azide- or alkyne-bearing monosaccharides on metabolic glyco-engineered mammalian cells. Here, we present a systematic study to elucidate the design space for the cytotoxic effects of the copper catalyst on NIH 3T3 fibroblasts and on HEK 293-F cells. Monitoring membrane integrity by flow cytometry and RT-PCR analysis with apoptotic and anti-apoptotic markers elucidated the general feasibility of CuAAC, with exposure time of the CuAAC reaction mixture having the major influence on biocompatibility. A high labeling efficiency of HEK 293-F cells with a fluorescent alkyne dye was rapidly achieved by CuAAC in comparison to copper free strain-promoted azide-alkyne cycloaddition (SPAAC). The study details effective and biocompatible conditions for CuAAC-based modification of glyco-engineered cells in comparison to its copper free alternative.

Evaluation of wild herbivore faeces from South Africa as a potential source of hydrolytically active microorganisms

This study assessed faecal matter from three indigenous South African herbivores-zebra, giraffe and impala-as a potential source for hydrolytically active aerobic and facultatively anaerobic bacteria. Herbivore droppings were collected freshly in a local nature reserve in Pietermaritzburg, South Africa. Soil samples adjacent to faecal collection sites and faeces from a domestic herbivore, the Nguni cow, were included as controls. Hydrolase and dehydrogenase activity in faecal matter and soil samples were measured by the fluorescein diacetate and the triphenyltetrazolium chloride assay. Viable counts and counts for amylase, cellulase, esterase and protease producers were established using plate count agar and solid media containing cellulose, skim milk, starch and Tween 80. Zebra droppings produced the highest hydrolase and dehydrogenase activity. Faecal matter of the three indigenous herbivores generally produced higher hydrolytic activity than Nguni cow faeces and soil controls, thereby confirming that these materials are potential targets for hydrolytic enzyme mining.

Lowering N2O emissions from soils using eucalypt biochar: the importance of redox reactions

Agricultural soils are the primary anthropogenic source of atmospheric nitrous oxide (N₂O), contributing to global warming and depletion of stratospheric ozone. Biochar addition has shown potential to lower soil N₂O emission, with the mechanisms remaining unclear. We incubated eucalypt biochar (550 °C) – 0, 1 and 5% (w/w) in Ferralsol at 3 water regimes (12, 39 and 54% WFPS) – in a soil column, following gamma irradiation. After N₂O was injected at the base of the soil column, in the 0% biochar control 100% of expected injected N₂O was released into headspace, declining to 67% in the 5% amendment. In a 100% biochar column at 6% WFPS, only 16% of the expected N₂O was observed. X-ray photoelectron spectroscopy identified changes in surface functional groups suggesting interactions between N₂O and the biochar surfaces. We have shown increases in -O-C = N /pyridine pyrrole/NH₃, suggesting reactions between N₂O and the carbon (C) matrix upon exposure to N₂O. With increasing rates of biochar application, higher pH adjusted redox potentials were observed at the lower water contents. Evidence suggests that biochar has taken part in redox reactions reducing N₂O to dinitrogen (N₂), in addition to adsorption of N₂O.

Light-responsive nanoparticle depot to control release of a small molecule angiogenesis inhibitor in the posterior segment of the eye

Therapies for macular degeneration and diabetic retinopathy require intravitreal injections every 4-8 weeks. Injections are uncomfortable, time-consuming, and carry risks of infection and retinal damage. However, drug delivery via noninvasive methods to the posterior segment of the eye has been a major challenge due to the eye's unique anatomy and physiology. Here we present a novel nanoparticle depot platform for on-demand drug delivery using a far ultraviolet (UV) light-degradable polymer, which allows noninvasively triggered drug release using brief, low-power light exposure. Nanoparticles stably retain encapsulated molecules in the vitreous, and can release cargo in response to UV exposure up to 30 weeks post-injection. Light-triggered release of nintedanib (BIBF 1120), a small molecule angiogenesis inhibitor, 10 weeks post-injection suppresses choroidal neovascularization (CNV) in rats. Light-sensitive nanoparticles are biocompatible and cause no adverse effects on the eye as assessed by electroretinograms (ERG), corneal and retinal tomography, and histology.

Cancer cell extinction through a magnetic fluid hyperthermia treatment produced by superparamagnetic Co–Zn ferrite nanoparticles

TEG mediated synthesis of CZF MNPs for cancer cell extinction by using magnetic fluid hyperthermia therapy.

Enhanced oxidative stress resistance through activation of a zinc deficiency transcription factor in Brachypodium distachyon

Identification of viable strategies to increase stress resistance of crops will become increasingly important for the goal of global food security as our population increases and our climate changes. Considering that resistance to oxidative stress is oftentimes an indicator of health and longevity in animal systems, characterizing conserved pathways known to increase oxidative stress resistance could prove fruitful for crop improvement strategies. This report argues for the usefulness and practicality of the model organism Brachypodium distachyon for identifying and validating stress resistance factors. Specifically, we focus on a zinc deficiency B. distachyon basic leucine zipper transcription factor, BdbZIP10, and its role in oxidative stress in the model organism B. distachyon. When overexpressed, BdbZIP10 protects plants and callus tissue from oxidative stress insults, most likely through distinct and direct activation of protective oxidative stress genes. Increased oxidative stress resistance and cell viability through the overexpression of BdbZIP10 highlight the utility of investigating conserved stress responses between plant and animal systems.

Compatibility of different polymers for cord blood-derived hematopoietic progenitor cells

The low yield of hematopoietic progenitor cells (HPC) present in cord blood grafts limits their application in clinics. A reliable strategy for ex vivo expansion of functional HPC is a present goal in regenerative medicine. Here we evaluate the capacity of several two-dimensional polymers to support HPC proliferation. Basic compatibility was tested by measuring cell viability, cytotoxicity and apoptosis of CD34(+) progenitors that were short and long-term exposed to sixteen bio and synthetic polymers. Resomer(®) RG503, PCL and Fibrin might be good alternatives to tissue culture plastic for culture of CB-derived CD34(+) progenitors. Further, these polymers will be produced in three-dimensional structures and tested for their cytocompatibility.

Fluorescein diacetate for determination of cell viability in 3D fibroblast-collagen-GAG constructs

Quantification of cell viability and distribution within engineered tissues currently relies on representative histology, phenotypic assays, and destructive assays of viability. To evaluate uniformity of cell density throughout 3D collagen scaffolds prior to in vivo use, a nondestructive, field assessment of cell viability is advantageous. Here, we describe a field measure of cell viability in lyophilized collagen-glycosaminoglycan (C-GAG) scaffolds in vitro using fluorescein diacetate (FdA). Fibroblast-C-GAG constructs are stained 1 day after cellular inoculation using 0.04 mg/ml FdA followed by exposure to 366 nm UV light. Construct fluorescence quantified using Metamorph image analysis is correlated with inoculation density, MTT values, and histology of corresponding biopsies. Construct fluorescence correlates significantly with inoculation density (p  <  0.001) and MTT values (p  <  0.001) of biopsies collected immediately after FdA staining. No toxicity is detected in the constructs, as measured by MTT assay before and after the FdA assay at different time points; normal in vitro histology is demonstrated for the FdA-exposed constructs. In conclusion, measurement of intracellular fluorescence with FdA allows for the early, comprehensive measurement of cellular distributions and viability in engineered tissue.

Development and validation of a quantitative, high-throughput, fluorescent-based bioassay to detect schistosoma viability

BACKGROUND

Schistosomiasis, caused by infection with the blood fluke Schistosoma, is responsible for greater than 200,000 human deaths per annum. Objective high-throughput screens for detecting novel anti-schistosomal targets will drive 'genome to drug' lead translational science at an unprecedented rate. Current methods for detecting schistosome viability rely on qualitative microscopic criteria, which require an understanding of parasite morphology, and most importantly, must be subjectively interpreted. These limitations, in the current state of the art, have significantly impeded progress into whole schistosome screening for next generation chemotherapies.

METHODOLOGY/PRINCIPAL FINDINGS

We present here a microtiter plate-based method for reproducibly detecting schistosomula viability that takes advantage of the differential uptake of fluorophores (propidium iodide and fluorescein diacetate) by living organisms. We validate this high-throughput system in detecting schistosomula viability using auranofin (a known inhibitor of thioredoxin glutathione reductase), praziquantel and a range of small compounds with previously-described (gambogic acid, sodium salinomycin, ethinyl estradiol, fluoxetidine hydrochloride, miconazole nitrate, chlorpromazine hydrochloride, amphotericin b, niclosamide) or suggested (bepridil, ciclopirox, rescinnamine, flucytosine, vinblastine and carbidopa) anti-schistosomal activities. This developed method is sensitive (200 schistosomula/well can be assayed), relevant to industrial (384-well microtiter plate compatibility) and academic (96-well microtiter plate compatibility) settings, translatable to functional genomics screens and drug assays, does not require a priori knowledge of schistosome biology and is quantitative.

CONCLUSIONS/SIGNIFICANCE

The wide-scale application of this fluorescence-based bioassay will greatly accelerate the objective identification of novel therapeutic lead targets/compounds to combat schistosomiasis. Adapting this bioassay for use with other parasitic worm species further offers an opportunity for great strides to be made against additional neglected tropical diseases of biomedical and veterinary importance.

Evaluation of solid (disc diffusion)- and liquid (turbidity)-phase antibiogram methods for clinical isolates of diarrheagenic E. coli and correlation with efflux

Multiple drug resistance (MDR) in bacteria causes higher mortality and morbidity, complicates treatment and increases health-care outlay. With no new-generation antibiotics in sight, its rapid spread through the environment poses grave danger. Therefore, rapid detection to identify effective antibiotics and to prevent their indiscriminate use is imperative. However, the widely used clinical method for antibiogram, the Kirby-Bauer disc-diffusion method (DDM), requires 2-3 days, has inherent shortcomings of solid-phase assays and is not suitable for high-throughput operations. In our research on MDR associated with childhood diarrhea, we determined the antibiogram of 73 clinical diarrheagenic Escherichia coli strains using both the DDM and the more reliable liquid turbidity method (LTM) performed in 96-microwell plates. The results were further correlated with a dye-exclusion efflux assay using fluorescein diacetate. Although LTM is apparently superior in saving critical time, suitability to high-throughput operations and reliability, we found that the serious shortcomings of DDM could be effectively countered by just doubling the dosage of antibiotics currently used in discs or by using two discs in place of one. With 48 of the 49 MDR strains being positive for efflux and the 12 strains 'susceptible' to all the antibiotics being negative, the efflux assay could be useful as an integral component of the antibiogram test or for additional confirmation. The presence of 65% of MDR strains among diarrheagenic E. coli is a matter of serious concern, although most of them could be treated with either Gentamycin or Amikacin, as is the practice by experience.

Modification of the fluorescein diacetate assay for screening of antifungal agents against Candida albicans: Comparison with the NCCLS methods

A modified fluorescein diacetate (FDA) assay has been compared with standard NCCLS broth macrodilution and broth microdilution methods for the detection of antifungal activity. The FDA assay was performed in a medium containing bacteriological peptone, NaCl, yeast extract and glucose (0.2%, 0.1%, 0.1% and 1% w/v, respectively) and buffered with 10 mM BES buffer. The MICs of amphotericin B, fluconazole, miconazole and flucytosine (representing three major classes of antifungal agents) obtained by the three methods were compared. The results obtained with the FDA assays correlated well with the NCCLS macrodilution method for MICs of amphotericin B, miconazole and fluconazole, but not for flucytosine. However, the MIC values of flucytosine obtained with the FDA assay were well within the quality control range for the two reference strains recommended by the NCCLS. The FDA assay described is an attractive alternative to the NCCLS methods for screening for antifungal agents, with the added advantage of objectivity of fluorescence measurement.

Anti-infective potential of natural products: how to develop a stronger in vitro 'proof-of-concept'

Natural products, either as pure compounds or as standardized plant extracts, provide unlimited opportunities for new drug leads because of the unmatched availability of chemical diversity. To secure this, a number of pivotal quality standards need to be set at the level of extract processing and primary evaluation in pharmacological screening models. This review provides a number of recommendations that will help to define a more sound 'proof-of-concept' for antibacterial, antifungal, antiviral and antiparasitic potential in natural products. An integrated panel of pathogens is proposed for antimicrobial profiling, using accessible standard in vitro experimental procedures, endpoint parameters and efficacy criteria. Primary requirements include: (1) use of reference strains or fully characterized clinical isolates, (2) in vitro models on the whole organism and if possible cell-based, (3) evaluation of selectivity by parallel cytotoxicity testing and/or integrated profiling against unrelated micro-organisms, (4) adequately broad dose range, enabling dose-response curves, (5) stringent endpoint criteria with IC(50)-values generally below 100microug/ml for extracts and below 25microM for pure compounds, (6) proper preparation, storage and in-test processing of extracts, (7) inclusion of appropriate controls in each in vitro test replicate (blanks, infected and reference controls) and (8) follow-up of in vitro activity ('hit'-status) in matching animal models ('lead'-status).

Biological activation of carbon filters

To prepare biological activated carbon (BAC), raw surface water was circulated through granular activated carbon (GAC) beds. Biological activity of carbon filters was initiated after about 6 months of filter operation and was confirmed by two methods: measurement of the amount of biomass attached to the carbon and by the fluorescein diacetate (FDA) test. The effect of carbon pre-washing on WG-12 carbon properties was also studied. For this purpose, the nitrogen adsorption isotherms at 77K and Fourier transform-infrared (FT-IR) spectra analyses were performed. Moreover, iodine number, decolorizing power and adsorption properties of carbon in relation to phenol were studied. Analysis of the results revealed that after WG-12 carbon pre-washing its BET surface increased a little, the pH value of the carbon water extract decreased from 11.0 to 9.4, decolorizing power remained at the same level, and the iodine number and phenol adsorption rate increased. In preliminary studies of the ozonation-biofiltration process, a model phenol solution with concentration of approximately 10mg/l was applied. During the ozonation process a dose of 1.64 mg O(3)/mg TOC (total organic carbon) was employed and the contact time was 5 min. Four empty bed contact times (EBCTs) in the range of 2.4-24.0 min were used in the biofiltration experiment. The effectiveness of purification was measured by the following parameters: chemical oxygen demand (COD(Mn)), TOC, phenol concentration and UV(254)-absorbance. The parameters were found to decrease with EBCT.

Optimisation of the fluorescein diacetate antibacterial assay

The fluorescein diacetate (FDA) antibacterial assay relies on the cleavage of fluorescein diacetate by metabolically active bacteria. The recent finding that microbiological media can lead to significant levels of cleavage has reduced the reliability of the assay. Using the nucleophilic scavengers N-ethylmaleimide and maleic anhydride, we have demonstrated that this abiotic cleavage is most likely due to nucleophiles such as cysteine and histidine commonly present in the media. To increase the reliability of the assay we have modified the original assay conditions to include use of dilute medium (peptone 0.2% w/v, yeast extract 0.1% w/v and NaCl 0.1% w/v) in a non-nucleophilic buffer and overnight incubation of the medium after addition of antibacterial agents. The optimised fluorescein diacetate assay has been used to determine the MIC of gentamicin, tetracycline and chloramphenicol for Escherichia coli, Staphyloccocus aureus and Pseudomonas aeruginosa and gave quantitative results that were reproducible and consistent with published data.