Radionuclide imaging technologies and their use in evaluating asthma drug deposition in the lungs

The Use of Single Photon Emission Computed Tomography in Aerosol Medicine

Imaging of radiolabeled aerosols provides useful in vivo data on both the initial site of deposition and its subsequent transport by mucociliary clearance and epithelial permeability. Single Photon Emission Computed Tomography (SPECT) uses a gamma camera with multiple rotating heads to produce three-dimensional (3D) images of inhaled radioaerosol labeled with technetium-99m. This enables total lung deposition and its 3D regional distribution to be quantified. Aligned 3D images of lung structure allow deposition data to be related to lung anatomy. Mucociliary clearance or epithelial permeability can be assessed from a time series of SPECT aerosol images. SPECT is slightly superior to planar imaging for measuring total lung deposition. However, it is more complex to use, and for studies where total lung deposition is the endpoint, planar imaging is recommended. However, SPECT has been shown to be clearly superior to planar imaging for assessing regional distribution of aerosol and is the method of choice for this purpose. It therefore has applications in studying the influence of regional deposition on clinical effectiveness and also in validating computer models of deposition. The inability to directly radiolabel drug molecules with ^99mTc is a clear disadvantage of SPECT and limits its potential use for pharmacokinetic studies. SPECT provides a wealth of data on aerosol deposition, which has been relatively underused at present. Optimal methods of analyzing and interpreting the data need to be developed. SPECT can also, in principle, provide detailed information of mucociliary clearance and has the potential to significantly improve knowledge of this process and hence clarify the role of clearance as a biomarker.

Nuclear medicine imaging methods as novel tools in the assessment of pulmonary drug disposition

INTRODUCTION

Drugs for the treatment of respiratory diseases are commonly administered by oral inhalation. Yet surprisingly little is known about the pulmonary pharmacokinetics of inhaled molecules. Nuclear medicine imaging techniques (i.e. planar gamma scintigraphy, single-photon emission computed tomography [SPECT] and positron emission tomography [PET]) enable the noninvasive dynamic measurement of the lung concentrations of radiolabeled drugs or drug formulations. This review discusses the potential of nuclear medicine imaging techniques in inhalation biopharmaceutical research.

AREAS COVERED

(i) Planar gamma scintigraphy studies with radiolabeled inhalation formulations to assess initial pulmonary drug deposition; (ii) imaging studies with radiolabeled drugs to assess their intrapulmonary pharmacokinetics; (iii) receptor occupancy studies to quantify the pharmacodynamic effect of inhaled drugs.

EXPERT OPINION

Imaging techniques hold potential to bridge the knowledge gap between animal models and humans with respect to the pulmonary disposition of inhaled drugs. However, beyond the mere assessment of the initial lung deposition of inhaled formulations with planar gamma scintigraphy, imaging techniques have rarely been employed in pulmonary drug development. This may be related to several technical challenges encountered with such studies. Considering the wealth of information that can be obtained with imaging studies their use in inhalation biopharmaceutics should be further investigated.

In Vitro and In Silico Investigations on Drug Delivery in the Mouth-Throat Models with Handihaler®

This work aimed to evaluate the relative inhalation parameters that affect the deposition of inhaled aerosols, including mouth-throat morphology, airflow rate, and initial condition of emitted particles. In vitro experiments were conducted using the US Pharmacopeia (USP) throat and a realistic mouth-throat (RMT) with Handihaler®. Then, in silico study of the gas-solid flow was performed by computational fluid dynamics and discrete phase method. Results indicated that aerosol deposition in RMT was higher compared to that in USP throat at an airflow rate of 30 L/min, with 33.16 ± 7.84% and 21.11 ± 7.1% lung deposition in USP throat and RMT models, respectively, which showed a better correlation with in vivo data from the literature. Increasing airflow rate resulted in better drug aerosolization, while the fine particle dose trend ascended before declining, with the peak value obtained at a flow rate of 40 L/min. Overall, the effect of geometrical variation was more significant. Additionally, in silico results demonstrated clearly that the initial conditions of the emitted particles from inhalers affected the subsequent deposition. Larger momentum possessed by the central aerosol jet entering the mouth directly led to stronger impaction, which resulted in the deposition in the front region of mouth-throat models. This study is beneficial to develop an in silico method to understand the underlying mechanisms of in vivo mouth-throat deposition.

Radiolabeling Method for Lyophilizate for Dry Powder Inhalation Formulations

Human lung deposition data is non-mandatory for drug approval but very useful for the development of orally inhaled drug products. Lung deposition of inhaled drugs can be quantified by radionuclide imaging, for which one of the first considerations is the method used to radiolabel formulations. In this study, we report the development of a radiolabeling method for lyophilizate for dry powder inhalation (LDPI) formulations. TechneCoatTM is one method that can radiolabel drug particles without using solvents. In this method, particles are radiolabeled with a dispersion of 99mTc-labeled nanoparticles called TechnegasTM. Because a LDPI formulation is not comprised of particles but is a lyophilized cake aerosolized by air impact, the TechneCoat method cannot be used for the radiolabeling of LDPI formulations. We therefore modified the TechneCoat apparatus so that LDPI formulations were not aerosolized by the Technegas flow. Radiolabeling using a modified TechneCoat apparatus was validated with model LDPI formulations of interferon alpha (IFN). IFN of 99mTc-unlabeled, IFN of 99mTc-labeled, and 99mTc of 99mTc-labeled LDPI formulations showed similar behavior, and differences from IFN of 99mTc-unlabeled LDPI formulations were within ±15% in aerodynamic particle size distribution measurement. Our radiolabeling method for LDPI formulations may be useful for the quantification of drug deposition in human lungs.

Fine Particle Fraction: The Good and the Bad

Fine particle fraction (FPF) is defined in general terms as the fraction or percentage of the drug mass contained in an aerosol cloud that may be small enough to enter the lungs and exert a clinical effect. An aerodynamic diameter of 5 μm represents the approximate border between "fine" and "coarse" particles, but there is no universally agreed upon definition of FPF in terms of an aerodynamic particle size range. FPF alone does not adequately describe a heterodisperse aerodynamic particle size distribution, and it needs to be combined with another measure or measures indicating the width of the distribution. When determined using techniques specified in United States and European Pharmacopeias, FPF is measured by cascade impactors that have straight-sided ninety degree inlets through which air is drawn at a constant rate. It is not the purpose of in vitro tests to predict in vivo behavior, and FPF is primarily a measure of aerosol quality. Despite this, FPF broadly predicts the amount of drug from an inhaler device depositing in the lungs, but it systematically overestimates whole lung deposition and may not correctly predict the relative lung depositions for two inhalers of different types. The relationship between FPF and both drug pharmacokinetics and clinical response is incompletely understood at the present time, and more studies are needed to investigate these relationships. Modifications to impactor technologies, including inlets that mimic the human extrathoracic airways and the use of realistic breathing patterns, would be expected to improve the predictive power of in vitro tests for drug delivery in vivo.

Comparison of pulmonary deposition of nebulized 99m technetium-diethylenetriamine-pentaacetic acid through 3 inhalation devices in healthy dogs

Background

Inhalation treatment frequently is used in dogs and cats with chronic respiratory disease. Little is known however about the performance of delivery devices and the distribution of aerosolized drugs in the lower airways.

Objective

To assess the performance of 3 delivery devices and the impact of variable durations of inhalation on the pulmonary and extrapulmonary deposition of nebulized ^99mtechnetium‐diethylenetriamine‐pentaacetic acid (^99mTc‐DTPA).

Animals

Ten university‐owned healthy Beagle dogs.

Methods

Prospective crossover study. Dogs inhaled the radiopharmaceutical for 5 minutes either through the Aerodawg spacer with a custom‐made nose‐muzzle mask, the Aerochamber spacer with the same mask, or the Aerodawg spacer with its original nose mask. In addition, dogs inhaled for 1 and 3 minutes through the second device. Images were obtained by 2‐dimensional planar scintigraphy. Radiopharmaceutical uptake was calculated as an absolute value and as a fraction of the registered dose in the whole body.

Results

Mean (±SD) lung deposition for the 3 devices was 9.2% (±5.0), 11.4% (±4.9), and 9.3% (±4.6), respectively. Differences were not statistically significant. Uptake in pulmonary and extrapulmonary tissues was significantly lower after 1‐minute nebulization, but the mean pulmonary/extrapulmonary deposition ratio (0.38 ± 0.27) was significantly higher than after 5‐minute nebulization (0.16 ± 0.1; P = .03). No significant differences were detected after 3‐ and 5‐minute nebulization.

Conclusion and Clinical Importance

The performance of a pediatric spacer with a custom‐made mask is comparable to that of a veterinary device. One‐minute nebulization provides lower pulmonary uptake but achieves a better pulmonary/extrapulmonary deposition ratio than does 5‐minute nebulization.

Numerical simulation of the unsteady flow field in the human pulmonary acinus

Understanding of airflow dynamics in the human pulmonary acinus is important for increasing targeted drug effectiveness and determining the health impact of toxic aerosols. However, there is a lack of quantitative data about the pulmonary airflow in realistic and flexible idealized geometries. This paper aims to numerically analyse the flow field of the pulmonary acinus using the computational fluid dynamics (CFD) model during transient breathing. Three-dimensional models with rhythmically expanding-contracting alveolar walls were developed for representing the pulmonary region of the human lung. Three different breathing scenarios were applied in the CFD simulations. The results showed that the transient flow conditions determined the transitions between flow types. The recirculating flow in the alveoli was observed for all cases and it was determined that its intensity depended on the breathing scenario. The flow velocity in the alveoli was slower than that of the channel flow. As we moved deeper into the lung, the flow pattern inside the alveoli exhibited a radial velocity profile. It was found that the alveolar flow exhibited a typical stenotic channel flow characteristics. As a result, the acinus models used in this study takes into account the alveolar wall motion based on physiological breathing conditions. To simulate or estimate the airflow dynamics, thus, the results obtained in this study can be easily utilized in the human lung airway models.

In vitro-in vivo correlations (IVIVCs) of deposition for drugs given by oral inhalation

Conventional in vitro tests to assess the aerodynamic particle size distribution (APSD) from inhaler devices use simple right-angle inlets ("mouth-throats", MTs) to cascade impactors, and air is drawn through the system at a fixed flow for a fixed time. Since this arrangement differs substantially from both human oropharyngeal airway anatomy and the patterns of air flow when patients use inhalers, the ability of in vitro tests to predict in vivo deposition of pharmaceutical aerosols has been limited. MTs that mimic the human anatomy, coupled with simulated breathing patterns, have yielded estimates of lung dose from in vitro data that closely match those from in vivo gamma scintigraphic or pharmacokinetic studies. However, different models of MTs do not always yield identical data, and selection of an anatomical MT and representative inhalation profiles remains challenging. Improved in vitro - in vivo correlations (IVIVCs) for inhaled drug products could permit increased reliance on in vitro data when developing new inhaled drug products, and could ultimately result in accelerated drug product development, together with reduced research and development spending.

A numerical study of the aerosol behavior in intra-acinar region of a human lung

The determination of the particle dynamics in the human acinar airways having millions of alveoli is critical in preventing potential health problems and delivering therapeutic particles effectively to target locations. Despite its complex geometrical structure and complicate wall movements, the advanced calculation simulations can provide valuable results to accurately predict the aerosol deposition in this region. The objective of this study was to numerically investigate the aerosol particle transport and deposition in the intra-acinar region of a human lung for different breathing scenarios (i.e., light, normal, and heavy activities) during multiple breaths. Idealized intra-acinar models utilized in this study consisted of a respiratory bronchial model, an alveolar duct model, and an alveolar sac model. The particles with 5 μm in diameter released from the inlet of the model were tracked until they deposited or escaped from the computational domain. The results showed that due to the rhythmic alveolar wall movement, the flow field was divided into two regions: one is the low-speed alveolar flow and the other is the channel flow. It was found that the chaotic acinar flow irreversibility played a significant role in the aerosol transport in higher generations. During the succeeding breaths, more particles deposited or escaped to the relating acinar generation and reached the more distal regions of the lung. The number of particles remaining in the suspension at the end of the third cycle ranged from 0.016% to 3%. When the mouth flow rate increased, the number of particles remaining in the suspension reduced, resulting in higher deposition efficiency. The total deposition efficiencies for each flow rate were 24%, 47%, and 77%, respectively. The particle simulation results also showed that more breathing cycle was required for full aerosol particle deposition or escape from the model. In addition to the alveolar wall motion, the type of breathing condition and breathing cycle had a significant effect on the accurate prediction of the aerosol deposition in the intra-acinar region of the human lung.

Inhaled aerosol dose distribution between proximal bronchi and lung periphery

Modern inhaled drug discovery programs assess dose delivery to proximal and distal airways using rudimentary imaging indices, where relative deposition is estimated by generically defined 'central' and 'peripheral' lung regions. Utilizing recent data linking the proximal airway topology to a characteristic pattern of aerosol lung deposition, we provide a direct measure of dose distribution between the proximal bronchi and the distal lung. We analyzed scintigraphic lung images of twelve asthma patients following inhalation of 1.5-, 3- and 6-µm monodisperse drug particles at breathing flows of 30- and 60-L/min. We explicitly used the central hot-spots associated with each patient's specific bronchial topology to obtain a direct measure of aerosol deposition in the proximal bronchi, rather than applying standard templates of lung boundaries. Maximum deposition in the central bronchi (as % of lung deposition) was 52 ± 10(SD)% (6 µm;60 L/min). Minimum central deposition was 17 ± 2(SD)% (1.5 µm;30 L/min) where the 83% aerosol 'escaping' deposition in the central bronchi reached 75 ± 17(SD)% of the lung area that could be reached by Krypton gas. For all particle sizes, hot-spots appeared in the same patient-specific central airway location, with greatest intensity at 60 L/min. For a range of respirable aerosol sizes and breathing flows, we have quantified deposited dose in the proximal bronchi and their distal lung reach, constituting a platform to support therapeutic inhaled aerosol drug development.

Non-intrusive high resolution in-vitro measurement of regional drug powder deposition

Optical Coherence Tomography (OCT) is a high-resolution and non-invasive cross-sectional imaging technique mainly used for medical imaging and industrial non-destructive testing. However, its feasibility in the quantification of pulmonary drug deposition has not been investigated. In this study, an optically accessible airway model of the upper airway and the tracheobronchial tree was used, and experiments were performed at flow rates of 40 L/min, 60 L/min and 80 L/min. Drug deposition in different regions of the airway cast has been determined and quantified from OCT images of the deposition layer. Regionally resolved measurement of deposition shows that flow rate has a significant effect (p = 0.04) on the average thickness of the deposition layer in the upper airway but not in the tracheobronchial tree under these test conditions. These localized and high-resolution measurements of deposition also demonstrate that the flow rate can influence the spatial uniformity of the deposition layer. The technique is able to provide significant regional drug deposition details, including the thickness, spatial deposition pattern and micro-cavities in the deposition layer, that would potentially serve to assess the efficacy of inhalation drug delivery systems.

A mesh nebulizer is more effective than jet nebulizer to nebulize bronchodilators during non-invasive ventilation of subjects with COPD: A randomized controlled trial with radiolabeled aerosols

BACKGROUND

Beneficial effects from non-invasive ventilation (NIV) in acute COPD are well-established, but the impact of nebulization during NIV has not been well described.

AIM

To compare pulmonary deposition and distribution across regions of interest with administration of radiolabeled aerosols generated by vibrating mesh nebulizers (VMN) and jet nebulizer (JN) during NIV.

METHODS

A crossover single dose study involving 9 stable subjects with moderate to severe COPD randomly allocated to receive aerosol administration by the VMN Aerogen and the MistyNeb jet nebulizer operating with oxygen at 8 lpm during NIV. Radiolabeled bronchodilators (fill volume of 3 mL: 0.5 mL salbutamol 2.5 mg + 0.125 mL ipratropium 0.25 mg and physiologic saline up to 3 mL) were delivered until sputtering during NIV (pressures of 12 cmH2O and 5 cmH2O - inspiratory and expiratory, respectively) using an oro-nasal facemask. Radioactivity counts were performed using a gamma camera and regions of interest (ROIs) were delimited. Aerosol mass balance based on counts from the lungs, upper airways, stomach, nebulizer, circuit, inspiratory and expiratory filters, and mask were determined and expressed as a percentage of the total.

RESULTS

Both inhaled and lung doses were greater with VMN (22.78 ± 3.38% and 12.05 ± 2.96%, respectively) than JN (12.51 ± 6.31% and 3.14 ± 1.71%; p = 0.008). Residual drug volume was lower in VMN than in JN (3.08 ± 1.3% versus 46.44 ± 5.83%, p = 0.001). Peripheral deposition of radioaerosol was significantly lower with JN than VMN.

CONCLUSIONS

VMN deposited > 3 fold more radioaerosol into the lungs of moderate to severe COPD patients than JN during NIV.

100 Years of Drug Delivery to the Lungs

Inhalation therapy is one of the oldest approaches to the therapy of diseases of the respiratory tract. It is well recognised today that the most effective and safe means of treating the lungs is to deliver drugs directly to the airways. Surprisingly, the delivery of therapeutic aerosols has a rich history dating back more than 2,000 years to Ayurvedic medicine in India, but in many respects, the introduction of the first pressurised metered-dose inhaler (pMDI) in 1956 marked the beginning of the modern pharmaceutical aerosol industry. The pMDI was the first truly portable and convenient inhaler that effectively delivered drug to the lung and quickly gained widespread acceptance. Since 1956, the pharmaceutical aerosol industry has experienced dramatic growth. The signing of the Montreal Protocol in 1987 to reduce the use of CFCs as propellants for aerosols led to a surge in innovation that resulted in the diversification of inhaler technologies with significantly enhanced delivery efficiency, including modern pMDIs, dry powder inhalers and nebuliser systems. There is also great interest in tailoring particle size to deliver drugs to treat specific areas of the respiratory tract. One challenge that has been present since antiquity still exists, however, and that is ensuring that the patient has access to the medication and understands how to use it effectively. In this article, we will provide a summary of therapeutic aerosol delivery systems from ancient times to the present along with a look to the future.

Anatomically Based Analysis of Radioaerosol Distribution in Pulmonary Scintigraphy: A Feasibility Study in Asthmatics

INTRODUCTION

Manual analysis of two-dimensional (2D) scintigraphy to evaluate aerosol deposition is usually subjective and has reduced sensitivity to quantify regional differences between central and distal airways.

AIMS

(1) To present a method to analyze 2D scans based on three-dimensional (3D)-linked anatomically consistent regions of interest (ROIs); (2) to evaluate peripheral-to-central counts ratio (P/C_2D) and penetration indices (PIs) for a set of 16 subjects with moderate-to-severe asthma; and (3) to compare the reproducibility of this method against one with manually traced ROIs.

METHODS

Two-dimensional scans were analyzed using custom software that scaled onto 2D-projections' 3D anatomical features, obtained from population-averaged computed tomography (CT) chest scans. ROIs for a rectangular box (bROI) and an anatomically shaped ROI (aROI) were defined by computer and by manually tracing the standard rectangular box (manual ROI [mROI]). These ROIs were defined five nonconsecutive times for each scan and average value and variability of the P/C_2D were estimated. Based on CT estimates of lung and airways, volumes lying under the bROI and aROI, a 2D penetration index (PI_2D) and a 3D penetration index (PI_3D), were defined as volume-normalized ratios of aerosol deposition in central and peripheral ROIs and in central and distal airways, respectively.

RESULTS

P/C_2D values and their variability, were influenced by the shape and method to define the ROIs: The P/C_2D was systematically greater and more variable for mROI versus bROI (p < 0.005). The P/C_2D for aROI was higher and its variability lower than those for the bROI (p < 0.001). The PI_2D was in average the same for aROI and bROI, and is substantially (∼30 × ) greater than PI_3D (p < 0.001). Both PI_2D and PI_3D, obtained with our analysis, compared well with literature values obtained with two scans (deposition and volume).

CONCLUSION

Our results demonstrate that 2D scintigraphy can be analyzed using anatomically based ROIs from 3D CT data, allowing objective and enhanced reproducibility values describing the distribution pattern of radioaerosol deposition in the tracheobronchial tree.

Validating Whole-Airway CFD Predictions of DPI Aerosol Deposition at Multiple Flow Rates

BACKGROUND

The objective of this study was to compare aerosol deposition predictions of a new whole-airway CFD model with available in vivo data for a dry powder inhaler (DPI) considered across multiple inhalation waveforms, which affect both the particle size distribution (PSD) and particle deposition.

METHODS

The Novolizer DPI with a budesonide formulation was selected based on the availability of 2D gamma scintigraphy data in humans for three different well-defined inhalation waveforms. Initial in vitro cascade impaction experiments were conducted at multiple constant (square-wave) particle sizing flow rates to characterize PSDs. The whole-airway CFD modeling approach implemented the experimentally determined PSDs at the point of aerosol formation in the inhaler. Complete characteristic airway geometries for an adult were evaluated through the lobar bronchi, followed by stochastic individual pathway (SIP) approximations through the tracheobronchial region and new acinar moving wall models of the alveolar region.

RESULTS

It was determined that the PSD used for each inhalation waveform should be based on a constant particle sizing flow rate equal to the average of the inhalation waveform's peak inspiratory flow rate (PIFR) and mean flow rate [i.e., AVG(PIFR, Mean)]. Using this technique, agreement with the in vivo data was acceptable with <15% relative differences averaged across the three regions considered for all inhalation waveforms. Defining a peripheral to central deposition ratio (P/C) based on alveolar and tracheobronchial compartments, respectively, large flow-rate-dependent differences were observed, which were not evident in the original 2D in vivo data.

CONCLUSIONS

The agreement between the CFD predictions and in vivo data was dependent on accurate initial estimates of the PSD, emphasizing the need for a combination in vitro-in silico approach. Furthermore, use of the AVG(PIFR, Mean) value was identified as a potentially useful method for characterizing a DPI aerosol at a constant flow rate.

Inflammation induced by inhaled lipopolysaccharide depends on particle size in healthy volunteers

AIMS

In drug development, the anti-inflammatory properties of new molecules in the lung are currently tested using the inhaled lipopolysaccharide (LPS) model. The total and regional lung bioavailability of inhaled particles depends significantly on their size. The objective of the present study was to compare inflammatory responses in healthy volunteers after the inhalation of LPS of varying droplet size.

METHODS

Three nebulizers were characterized by different droplet size distributions [mean mass median aerodynamic diameters: Microcirrus (2.0 μm), MB2 (3.2 μm) and Pari (7.9 μm)]. Participants inhaled three boluses of a 20 μg (technetium 99 m-labelled) solution of LPS, randomly delivered by each nebulizer. We measured the lung deposition of the nebulized LPS by gamma-scintigraphy, while blood and sputum biomarkers were evaluated before and after challenges.

RESULTS

MB2 and Pari achieved greater lung deposition than Microcirrus [171.5 (±72.9) and 217.6 (±97.8) counts pixel^-1 , respectively, vs. 67.9 (±20.6) counts pixel^-1 ; P < 0.01]. MB2 and Pari caused higher levels of blood C-reactive protein and more total cells and neutrophils in sputum compared with Microcirrus (P < 0.05). C-reactive protein levels correlated positively with lung deposition (P < 0.01).

CONCLUSIONS

Inhalation of large droplets of LPS gave rise to greater lung deposition and induced a more pronounced systemic and bronchial inflammatory response than small droplets. The systemic inflammatory response correlated with lung deposition. NCT01081392.

Aerosol Delivery of siRNA to the Lungs. Part 1: Rationale for Gene Delivery Systems

This article reviews the pulmonary route of administration, aerosol delivery devices, characterization of pulmonary drug delivery systems, and discusses the rationale for inhaled delivery of siRNA. Diseases with known protein malfunctions may be mitigated through the use of siRNA therapeutics. The inhalation route of administration provides local delivery of siRNA therapeutics for the treatment of various pulmonary diseases, however barriers to pulmonary delivery and intracellular delivery of siRNA exists. siRNA loaded nanocarriers can be used to overcome the barriers associated with the pulmonary route, such as anatomical barriers, mucociliary clearance, and alveolar macrophage clearance. Apart from naked siRNA aerosol delivery, previously studied siRNA carrier systems comprise of lipidic, polymeric, peptide, or inorganic origin. Such siRNA delivery systems formulated as aerosols can be successfully delivered via an inhaler or nebulizer to the pulmonary region. Preclinical animal investigations of inhaled siRNA therapeutics rely on intratracheal and intranasal siRNA and siRNA nanocarrier delivery. Aerosolized siRNA delivery systems may be characterized using in vitro techniques, such as dissolution test, inertial cascade impaction, delivered dose uniformity assay, laser diffraction, and laser Doppler velocimetry. The ex vivo techniques used to characterize pulmonary administered formulations include the isolated perfused lung model. In vivo techniques like gamma scintigraphy, 3D SPECT, PET, MRI, fluorescence imaging and pharmacokinetic/pharmacodynamics analysis may be used for evaluation of aerosolized siRNA delivery systems. The use of inhalable siRNA delivery systems encounters barriers to their delivery, however overcoming the barriers while formulating a safe and effective delivery system will offer unique advances to the field of inhaled medicine.

Validating CFD Predictions of Pharmaceutical Aerosol Deposition with In Vivo Data

PURPOSE

CFD provides a powerful approach to evaluate the deposition of pharmaceutical aerosols; however, previous studies have not compared CFD results of deposition throughout the lungs with in vivo data.

METHODS

The in vivo datasets selected for comparison with CFD predictions included fast and slow clearance of monodisperse aerosols as well as 2D gamma scintigraphy measurements for a dry powder inhaler (DPI) and softmist inhaler (SMI). The CFD model included the inhaler, a characteristic model of the mouth-throat (MT) and upper tracheobronchial (TB) airways, stochastic individual pathways (SIPs) representing the remaining TB region, and recent CFD-based correlations to predict pharmaceutical aerosol deposition in the alveolar airways.

RESULTS

For the monodisperse aerosol, CFD predictions of total lung deposition agreed with in vivo data providing a percent relative error of 6% averaged across aerosol sizes of 1-7 μm. With the DPI and SMI, deposition was evaluated in the MT, central airways (bifurcations B1-B7), and intermediate plus peripheral airways (B8 through alveoli). Across these regions, CFD predictions produced an average relative error <10% for each inhaler.

CONCLUSIONS

CFD simulations with the SIP modeling approach were shown to accurately predict regional deposition throughout the lungs for multiple aerosol types and different in vivo assessment methods.

In Vitro Testing for Orally Inhaled Products: Developments in Science-Based Regulatory Approaches

This article is part of a series of reports from the "Orlando Inhalation Conference-Approaches in International Regulation" which was held in March 2014, and coorganized by the University of Florida and the International Pharmaceutical Aerosol Consortium on Regulation and Science (IPAC-RS). The goal of the conference was to foster the exchange of ideas and knowledge across the global scientific and regulatory community in order to identify and help move towards strategies for internationally harmonized, science-based regulatory approaches for the development and marketing approval of inhalation medicines, including innovator and second entry products. This article provides an integrated perspective of case studies and discussion related to in vitro testing of orally inhaled products, including in vitro-in vivo correlations and requirements for in vitro data and statistical analysis that support quality or bioequivalence for regulatory applications.

Technological and practical challenges of dry powder inhalers and formulations

In the 50 years following the introduction of the first dry powder inhaler to the market, several developments have occurred. Multiple-unit dose and multi-dose devices have been introduced, but first generation capsule inhalers are still widely used for new formulations. Many new particle engineering techniques have been developed and considerable effort has been put in understanding the mechanisms that control particle interaction and powder dispersion during inhalation. Yet, several misconceptions about optimal inhaler performance manage to survive in modern literature. It is, for example still widely believed that a flow rate independent fine particle fraction contributes to an inhalation performance independent therapy, that dry powder inhalers perform best at 4 kPa (or 60 L/min) and that a high resistance device cannot be operated correctly by patients with reduced lung function. Nevertheless, there seems to be a great future for dry powder inhalation. Many new areas of interest for dry powder inhalation are explored and with the assistance of new techniques like computational fluid dynamics and emerging particle engineering technologies, this is likely to result in a new generation of inhaler devices and formulations, that will enable the introduction of new therapies based on inhaled medicines.

Assessment of regional lung function with multivolume (1)H MR imaging in health and obstructive lung disease: comparison with (3)He MR imaging

PURPOSE

To introduce a method based on multivolume proton (hydrogen [(1)H]) magnetic resonance (MR) imaging for the regional assessment of lung ventilatory function, investigating its use in healthy volunteers and patients with obstructive lung disease and comparing the outcome with the outcome of the research standard helium 3 ((3)He) MR imaging.

MATERIALS AND METHODS

The institutional review board approved the HIPAA-compliant protocol, and informed written consent was obtained from each subject. Twenty-six subjects, including healthy volunteers (n = 6) and patients with severe asthma (n = 11) and mild (n = 6) and severe (n = 3) emphysema, were imaged with a 1.5-T whole-body MR unit at four lung volumes (residual volume [ RV residual volume ], functional residual capacity [ FRC functional residual capacity ], 1 L above FRC functional residual capacity [ FRC+1 L 1 L above FRC ], total lung capacity [ TLC total lung capacity ]) with breath holds of 10-11 seconds, by using volumetric interpolated breath-hold examination. Each pair of volumes were registered, resulting in maps of (1)H signal change between the two lung volumes. (3)He MR imaging was performed at FRC+1 L 1 L above FRC by using a two-dimensional gradient-echo sequence. (1)H signal change and (3)He signal were measured and compared in corresponding regions of interest selected in ventral, intermediate, and dorsal areas.

RESULTS

In all volunteers and patients combined, proton signal difference between TLC total lung capacity and RV residual volume correlated positively with (3)He signal (correlation coefficient R(2) = 0.64, P < .001). Lower (P < .001) but positive correlation results from (1)H signal difference between FRC functional residual capacity and FRC+1 L 1 L above FRC (R(2) = 0.44, P < .001). In healthy volunteers, (1)H signal changes show a higher median and interquartile range compared with patients with obstructive disease and significant differences between nondependent and dependent regions.

CONCLUSION

Findings in this study demonstrate that multivolume (1)H MR imaging, without contrast material, can be used as a biomarker for regional ventilation, both in healthy volunteers and patients with obstructive lung disease.

The co-imaging of gamma camera measurements of aerosol deposition and respiratory anatomy

The use of gamma camera imaging following the inhalation of a radiolabel has been widely used by researchers to investigate the fate of inhaled aerosols. The application of two-dimensional (2D) planar gamma scintigraphy and single-photon emission computed tomography (SPECT) to the study of inhaled aerosols is discussed in this review. Information on co-localized anatomy can be derived from other imaging techniques such as krypton ventilation scans and low- and high-resolution X-ray computed tomography (CT). Radionuclide imaging, combined with information on anatomy, is a potentially useful approach when the understanding of regional deposition within the lung is central to research objectives for following disease progression and for the evaluation of therapeutic intervention.

Bioequivalence of inhaled drugs: fundamentals, challenges and perspectives

Interest in bioequivalence (BE) of inhaled drugs derives largely from the desire to offer generic substitutes to successful drug products. The complexity of aerosol dosage forms renders them difficult to mimic and raises questions regarding definitions of similarities and those properties that must be controlled to guarantee both the quality and the efficacy of the product. Despite a high level of enthusiasm to identify and control desirable properties there is no clear guidance, regulatory or scientific, for the variety of aerosol dosage forms, on practical measures of BE from which products can be developed. As more data on the pharmaceutical and clinical relevance of various techniques, as described in this review, become available, it is likely that a path to the demonstration of BE will become evident. In the meantime, debate on this topic will continue.

A novel device for automatic withdrawal and accurate calibration of 99m-technetium radiopharmaceuticals to minimise radiation exposure to nuclear medicine staff and patient

A Joint Automatic Dispenser Equipment (JADE) has been designed and fabricated for automatic withdrawal and calibration of radiopharmaceutical materials. The thermoluminescent dosemeter procedures have shown a reduction in dose to the technician's hand with this novel dose dispenser system JADE when compared with the manual withdrawal of (99m)Tc. This system helps to increase the precision of calibration and to minimise the radiation dose to the hands and body of the workers. This paper describes the structure of this device, its function and user-friendliness, and its efficacy. The efficacy of this device was determined by measuring the radiation dose delivered to the hands of the nuclear medicine laboratory technician. The user-friendliness of JADE has been examined. The automatic withdrawal and calibration offered by this system reduces the dose to the technician's hand to a level below the maximum permissible dose stipulated by the international protocols. This research will serve as a backbone for future study about the safe use of ionising radiation in medicine.

Computational and bioengineered lungs as alternatives to whole animal, isolated organ, and cell-based lung models

Development of lung models for testing a drug substance or delivery system has been an intensive area of research. However, a model that mimics physiological and anatomical features of human lungs is yet to be established. Although in vitro lung models, developed and fine-tuned over the past few decades, were instrumental for the development of many commercially available drugs, they are suboptimal in reproducing the physiological microenvironment and complex anatomy of human lungs. Similarly, intersubject variability and high costs have been major limitations of using animals in the development and discovery of drugs used in the treatment of respiratory disorders. To address the complexity and limitations associated with in vivo and in vitro models, attempts have been made to develop in silico and tissue-engineered lung models that allow incorporation of various mechanical and biological factors that are otherwise difficult to reproduce in conventional cell or organ-based systems. The in silico models utilize the information obtained from in vitro and in vivo models and apply computational algorithms to incorporate multiple physiological parameters that can affect drug deposition, distribution, and disposition upon administration via the lungs. Bioengineered lungs, on the other hand, exhibit significant promise due to recent advances in stem or progenitor cell technologies. However, bioengineered approaches have met with limited success in terms of development of various components of the human respiratory system. In this review, we summarize the approaches used and advancements made toward the development of in silico and tissue-engineered lung models and discuss potential challenges associated with the development and efficacy of these models.

Deposition of micrometer particles in pulmonary airways during inhalation and breath holding

We investigated how breath holding increases the deposition of micrometer particles in pulmonary airways, compared with the deposition during inhalation period. A subject-specific airway model with up to thirteenth generation airways was constructed from multi-slice CT images. Airflow and particle transport were simulated by using GPU computing. Results indicate that breath holding effectively increases the deposition of 5μm particles for third to sixth generation (G3-G6) airways. After 10s of breath holding, the particle deposition fraction increased more than 5 times for 5μm particles. Due to a small terminal velocity, 1μm particles only showed a 50% increase in the most efficient case. On the other hand, 10μm particles showed almost complete deposition due to high inertia and high terminal velocity, leading to an increase of 2 times for G3-G6 airways. An effective breath holding time for 5μm particle deposition in G3-G6 airways was estimated to be 4-6s, for which the deposition amount reached 75% of the final deposition amount after 10s of breath holding.

Lung imaging - two dimensional gamma scintigraphy, SPECT, CT and PET

This review will cover the principles of imaging the deposition of inhaled drugs and some of the state-of-the art imaging techniques being used today. Aerosol deposition can be imaged and quantified by the addition of a radiolabel to the aerosol formulation. The subsequent imaging of the inhaled deposition pattern can be acquired by different imaging techniques. Specifically, this review will focus on the use of two-dimensional planar, gamma scintigraphy, SPECT, CT and PET. This review will look at how these imaging techniques are used to investigate the mechanisms of drug delivery in the lung and how the lung anatomy and physiology have the potential to alter therapeutic outcomes.

Comparative pharmacoscintigraphic and pharmacokinetic evaluation of two new formulations of inhaled insulin in type 1 diabetic patients

In this open, single-dose study, we compared the lung deposition and bioavailability of two newly developed insulin formulations for pulmonary delivery. Twelve type 1 diabetic patients were administered the two insulin products (2 U/kg b.w.), which had been radiolabelled with (99m)Tc. The formulations were either microparticles of insulin without excipients (F1) or lipid-coated insulin microparticles (F2). Lung deposition was assessed by γ-scintigraphy imaging performed immediately after administration. Bioavailability was evaluated by quantifying serum insulin levels over a period of 6 h. Lung deposition was found to be 50 ± 9% and 24 ± 8% for the F1 and F2 formulations, respectively. The insulin AUC₀₋₃₆₀ ratio of F1/F2 was 188%, which was consistent with scintigraphic imaging. The concordance between imaging and biological results suggests that the lower bioavailability of F2 is due to its lower lung deposition and not to a reduced absorption into the blood stream. Additional in vitro experiments indicated that the lower performance of F2 was most probably related to a lower disaggregation efficiency of the powder when administered at a sub-optimal flow rate. The two formulations showed interesting pharmacokinetic profiles (T(max) of 26 and 16 min for F1 and F2, respectively) that mimic the physiological insulin secretion pattern. The bioavailability of the developed formulations was within the range of other DPI insulin formulations that have reached the final stages of clinical development.

Formation, characterization, and fate of inhaled drug nanoparticles

Nanoparticles bring many benefits to pulmonary drug delivery applications, especially for systemic delivery and drugs with poor solubility. They have recently been explored in pressurized metered dose inhaler, nebulizer, and dry powder inhaler applications, mostly in polymeric forms. This article presents a review of processes that have been used to generate pure (non polymeric) drug nanoparticles, methods for characterizing the particles/formulations, their in-vitro and in-vivo performances, and the fate of inhaled nanoparticles.

Challenges in assessing regional distribution of inhaled drug in the human lungs

INTRODUCTION

Both the total amount of drug deposited in the lungs (whole lung deposition) and the amount deposited in different lung regions (regional lung deposition) are potentially important factors that determine the safety and efficacy of inhaled drugs. Radionuclide imaging is well established for quantifying the whole lung deposition of inhaled drugs, but the assessment of regional lung deposition is less straightforward, because of the complex nature of the lung anatomy.

AREAS COVERED

This review describes the challenges and problems associated with quantifying regional lung deposition by the two-dimensional (2D) radionuclide imaging method of gamma scintigraphy, and by the three-dimensional (3D) radionuclide imaging methods of single-photon-emission computed tomography (SPECT) and positron-emission tomography (PET). The advantages and disadvantages of each method for assessing regional lung deposition are discussed.

EXPERT OPINION

Owing to its 2D nature, gamma scintigraphy provides limited information about regional lung deposition. SPECT provides regional lung deposition data in three dimensions, but usually involves a (99m)Tc radiolabel. PET enables the regional lung deposition of radiolabeled drug molecules to be quantified in three dimensions, but poses the greatest logistical and technical difficulties. Despite their more challenging nature, 3D imaging methods should be considered as an alternative to gamma scintigraphy whenever the determination of regional lung deposition of pharmaceutical aerosols is a major study objective.

Higher tobramycin concentration and vibrating mesh technology can shorten antibiotic treatment time in cystic fibrosis

Poor adherence to recommended therapy in cystic fibrosis (CF) is often because of the time demands of therapy. Tobramycin (TOBI®, 300 mg at 60 mg/ml) inhaled from the PARI LC PLUS® nebulizer requires about 20 min. This study determined if equivalent levels of pulmonary deposition could be achieved in shorter time using 1.5 ml of 100 mg/ml tobramycin solution delivered by an investigational eFlow® nebulizer. Sixteen males with stable CF, 8 children and 8 adults, and an FEV(1)  > 45% predicted inhaled both preparations on two occasions with (99m) Tc-DTPA added to the tobramycin. Blood samples were taken for quantification of tobramycin in the serum. The PARI LC PLUS® delivered 45.4 (39.3-51.6), mean and 95% CI, mg to the lungs in 17.0 ± 2.5 min (mean ± SD) with serum levels of 1,089 ± 388 µg/L. The investigational eFlow® delivered 46.3(40.3-51.7) mg in 4.0 ± 1.0 min with blood levels of 909 ± 458 µg/L. Only the time of delivery was significantly different with P < 0.0001 (paired t-test). Tolerability of the treatment was comparable for both inhalation regimes, but the shorter treatment was preferred by all patients. These results demonstrate the possibility of delivering equivalent levels of tobramycin much faster into the lungs of CF patients when using eFlow®, a very efficient electronic nebulizer.

Comparing lung regions of interest in gamma scintigraphy for assessing inhaled therapeutic aerosol deposition

BACKGROUND

Two-dimensional gamma scintigraphy is an important technique used to evaluate the lung deposition from inhaled therapeutic aerosols. Images are divided into regions of interest and deposition indices are derived to quantify aerosol distribution within the intrapulmonary airways. In this article, we compared the different approaches that have been historically used between different laboratories for geometrically defining lung regions of interest. We evaluated the effect of these different approaches on the derived indices classically used to assess inhaled aerosol deposition in the lungs. Our primary intention was to assess the ability of different regional lung templates to discriminate between central and peripheral airway deposition patterns generated by inhaling aerosols of different particle sizes.

METHODS

We investigated six methods most commonly reported in the scientific literature to define lung regions of interest and assessed how different each of the derived regional lung indices were between the methods to quantify regional lung deposition. We used monodisperse albuterol aerosols of differing particle size (1.5, 3, and 6 μm) in five mild asthmatic subjects [forced expiratory volume in 1 sec (FEV(1)) 90% predicted] to test the different approaches of each laboratory.

RESULTS

We observed the areas of geometry used to delineate central (C) and peripheral (P) lung regions of interest varied markedly between different laboratories. There was greater similarity between methods in values of penetration index (PI), defined as P/C aerosol counts normalized by P/C krypton ventilation counts, compared to nonnormalized C/P or P/C aerosol count-ratios. Normalizing the aerosol deposition P/C count-ratios by the ventilation P/C count-ratios, reduced the variability of the data. There was dependence of the regional lung deposition indices on the size of the P region of interest in that, as P increased, C/P count-ratios decreased and P/C count-ratios increased, whereas PI was less affected by variations in the P area. We found particle size, itself, strongly influenced the indices of regional aerosol deposition such that C/P count-ratios increased with increasing particle size for each method and conversely, P/C count-ratios and PI decreased.

CONCLUSIONS

Different approaches used to determine pulmonary regions of interest and quantify aerosol deposition produce different results. Our research highlights a genuine need for a consensus to standardize the methodology to facilitate data comparison between laboratories on aerosol deposition.

Determination of lung deposition following inhalation of ciclesonide using different bioanalytical procedures

Ciclesonide (Alvesco(®)) is an inhaled corticosteroid administered as a solution via a metered-dose inhaler, using hydrofluoroalkane HFA-134a as a propellant. Ciclesonide is inhaled as a prodrug, which is activated by pulmonary esterases to the pharmacologically active metabolite desisobutyryl-ciclesonide (des-CIC). Lung deposition is an important factor that contributes to the desired therapeutic effect of inhaled corticosteroid. More than 50% of the inhaled dose is deposited in the lung as demonstrated by scintigraphical methods after inhalation of ciclesonide. The swallowed drug does not contribute to the systemic circulation because of the low oral systemic bioavailability, which is below 1% for ciclesonide and des-CIC. Due to the negligible oral bioavailability the pharmacokinetic parameters following inhalation are a surrogate for lung deposition. The pulmonary bioavailability was more than 60% as assessed for des-CIC in pharmacokinetic studies using HPLC-MS/MS detection as bioanalytical method. Pharmacokinetics in asthmatic patients and healthy subjects are similar.

Deposition, imaging, and clearance: what remains to be done?

Deposition and clearance studies are used during product development and in fundamental research. These studies mostly involve radionuclide imaging, but pharmacokinetic methods are also used to assess the amount of drug absorbed through the lungs, which is closely related to lung deposition. Radionuclide imaging may be two-dimensional (gamma scintigraphy or planar imaging), or three-dimensional (single photon emission computed tomography and positron emission tomography). In October 2009, a group of scientists met at the "Thousand Years of Pharmaceutical Aerosols" conference in Reykjavik, Iceland, to discuss future research in key areas of pulmonary drug delivery. This article reports the session on "Deposition, imaging and clearance." The objective was partly to review our current understanding, but more importantly to assess "what remains to be done?" A need to standardize methodology and provide a regulatory framework by which data from radionuclide imaging methods could be compared between centers and used in the drug approval process was recognized. There is also a requirement for novel radiolabeling methods that are more representative of production processes for dry powder inhalers and pressurized metered dose inhalers. A need was identified for studies to aid our understanding of the relationship between clinical effects and regional deposition patterns of inhaled drugs. A robust methodology to assess clearance from small conducting airways should be developed, as a potential biomarker for therapies in cystic fibrosis and other diseases. The mechanisms by which inhaled nanoparticles are removed from the lungs, and the factors on which their removal depends, require further investigation. Last, and by no means least, we need a better understanding of patient-related factors, including how to reduce the variability in pulmonary drug delivery, in order to improve the precision of deposition and clearance measurements.

A comparison of amount and speed of deposition between the PARI LC STAR® jet nebulizer and an investigational eFlow® nebulizer

BACKGROUND

The potency and physical properties of many of the drugs used in the treatment of cystic fibrosis necessitates the use of nebulization, a relatively time-consuming pulmonary delivery method. Newer, faster, and more efficient delivery systems are being proposed. The purposes of this study was to compare the length of time it took to deliver the equivalent of normal saline nebulized for 10 min in a PARI LC STAR(®) nebulizer to that of an investigational PARI eFlow(®).

METHODS

Six normal adults inhaled a 4-mL (36-mg) charge volume of saline from the LC STAR(®) or a 2.5-mL (22.5-mg) charge volume from the investigational eFlow(®). The saline was mixed with (99m)Tc-DTPA to allow two-dimensional imaging. The inhalation was preceded by a xenon equilibration scan to allow more accurate separation of deposition into central and peripheral lung regions.

RESULTS

The investigational eFlow(®) delivered 8.6 ± 1.0 mg, approximately 90% of the lung dose compared to the LC STAR(®), 9.6 ± 1.0 mg, but did in less than half the time (p < 0.02 for both). There were no differences in central versus peripheral distribution for either device.

CONCLUSIONS

In conclusion the investigational eFlow(®) was both faster and more efficient than the LC STAR(®).

Assessment methods of inhaled aerosols: technical aspects and applications

The pulmonary route has been used with success for the treatment of both lung (asthma) and systemic diseases (diabetes). The fate of an inhaled drug (absorption and deposition) within human lungs has great importance, particularly in drug development and quality control. This article focuses on the various methods that are now applied for aerosol fate investigation. Several assessment methods, ranging from in vitro assays (impaction and optical systems) to in vivo experiments (imaging and pharmacological methods), are described. In vitro assays measure particle size distribution and emitted drug dose, which could be predictive of lung deposition pattern in vivo. However, in vivo methods provide direct information about the concentration and the location of inhaled drug within lung. Advantages and limitations of the different techniques are identified. In addition to these experimental techniques, mathematical deposition models, elaborated in more realistic conditions and designed to predict the fate of inhaled particles, are also illustrated.

Development of budesonide microparticles using spray-drying technology for pulmonary administration: design, characterization, in vitro evaluation, and in vivo efficacy study

The purpose of this research was to generate, characterize, and investigate the in vivo efficacy of budesonide (BUD) microparticles prepared by spray-drying technology with a potential application as carriers for pulmonary administration with sustained-release profile and improved respirable fraction. Microspheres and porous particles of chitosan (drug/chitosan, 1:2) were prepared by spray drying using optimized process parameters and were characterized for different physicochemical parameters. Mass median aerodynamic diameter and geometric standard deviation for conventional, microspheres, and porous particles formulations were 2.75, 4.60, and 4.30 microm and 2.56, 1.75, and 2.54, respectively. Pharmacokinetic study was performed in rats by intratracheal administration of either placebo or developed dry powder inhalation (DPI) formulation. Pharmacokinetic parameters were calculated (Ka, Ke, T(max), C(max), AUC, and Vd) and these results indicated that developed formulations extended half life compared to conventional formulation with onefold to fourfold improved local and systemic bioavailability. Estimates of relative bioavailability suggested that developed formulations have excellent lung deposition characteristics with extended T(1/2) from 9.4 to 14 h compared to conventional formulation. Anti-inflammatory activity of BUD and developed formulations was compared and found to be similar. Cytotoxicity was determined in A549 alveolar epithelial cell line and found to be not toxic. In vivo pulmonary deposition of developed conventional formulation was studied using gamma scintigraphy and results indicated potential in vitro-in vivo correlation in performance of conventional BUD DPI formulation. From the DPI formulation prepared with porous particles, the concentration of BUD increased fourfold in the lungs, indicating pulmonary targeting potential of developed formulations.

Relationship between structural changes and hyperpolarized gas magnetic resonance imaging in chronic obstructive pulmonary disease using computational simulations with realistic alveolar geometry

Both the development of accurate models of lung function and their quantitative validation can be significantly enhanced by the use of functional imaging techniques. The advent of hyperpolarized noble gas magnetic resonance imaging (MRI) technology has increased the amount of local, functional information we can obtain from the lung. In particular, application of (3)He to measure apparent diffusion coefficients has enabled some measure of lung microstructure and airspace size within the lung. Models mimicking image acquisition in hyperpolarized gas MRI can improve understanding of the relationship between image findings and lung structure, and can be used to improve the definition of imaging protocols. In this paper, we review the state of the art in hyperpolarized gas MRI modelling. We also present our own results, obtained using a Monte Carlo approach and a realistic alveolar sac geometry, which has previously been applied in functional lung studies. In this way, we demonstrate the potential for models combining lung function and image acquisition, which could provide valuable tools in both basic studies and clinical practice.

Scintigraphy can be used to compare delivery of sore throat formulations

AIMS

Sore throat (pharyngitis) is commonly treated with over-the-counter lozenges, tablets, sprays and gargles. While the efficacy of the active ingredients has been examined, less is known about the comparative efficacy of the different delivery formats.

METHODS

A pilot study was initially performed, followed by an open-label, four-way crossover study in healthy volunteers to quantitatively assess the delivery efficacy of a lozenge, tablet, spray and gargle, using technetium-99m and scintigraphy as a marker of deposition and clearance of the active ingredients.

RESULTS

Initial deposition in the mouth and throat combined was significantly greater for the solid dose forms (lozenge and tablet) than for the spray or gargle. Rates of clearance were initially similar for the tablet and lozenge with low levels of radioactivity present at up to 2 h. At 10 and 20 min, significantly more of the dose remained for the lozenge than for the tablet. The mouth appeared to act as a reservoir for continued clearance to the throat.

DISCUSSION AND CONCLUSION

Scintigraphy is an effective means of quantifying the delivery efficiency, and hence availability, of sore throat medications. The results presented here suggest that both lozenges and tablets offer considerable advantages over sprays or gargles, both in terms of proportion of the dose delivered to the mouth and throat, combined, and clearance from these regions. These delivery formats provide fast, effective and prolonged delivery of active ingredients, highlighting their potential benefits for sore throat medication.

In vitro/in vivo comparisons in pulmonary drug delivery

Establishing clear relationships between in vitro and in vivo data for inhaled drug products is an important goal. In vitro aerodynamic particle size distributions (APSDs) are expected to have some predictive power not only for drug deposition, but also for clinical effects. APSD data obtained by cascade impaction have been compared with lung deposition data measured in gamma scintigraphy studies. Whole-lung deposition correlated significantly with fine particle fraction (FPF) across a range of inhaler devices. FPF, defined in terms of aerosol <5.8 microm or <6.8 microm diameter, systematically overestimated lung deposition for virtually all inhalers. Lung deposition showed closer numerical equivalence to the percentage of the aerosol dose smaller than 3 microm diameter. Correlations exist between APSD data and whole-lung deposition, which may allow the greater use of APSD data for comparing inhaler devices. Agreement between in vitro and in vivo data may be improved by measuring APSD in ways that more closely mimic clinical use, including the use of impactor inlets that simulate the human upper airway anatomy. At the present time there are few published data that relate APSD to the clinical response of inhaled drugs in an unambiguous way.