Nanoparticle drug delivery system for restenosis

Applications of Nanotechnology in the Field of Cardiology

Cardiovascular diseases (CVDs) are a leading cause of death globally, demanding innovative therapeutic strategies. Nanoformulations, including nanoparticles, address challenges in drug delivery, stem cell therapy, imaging, and gene delivery. Nanoparticles enhance drug solubility, bioavailability, and targeted delivery, with gas microbubbles, liposomal preparations, and paramagnetic nanoparticles showing potential in treating atherosclerosis and reducing systemic side effects. In stem cell therapy, nanoparticles improve cell culture, utilizing three-dimensional nanofiber scaffolds and enhancing cardiomyocyte growth. Gold nanoparticles and poly(lactic-co-glycolic acid) (PLGA)-derived microparticles promote stem cell survival. Stem cell imaging utilizes direct labeling with nanoparticles for magnetic resonance imaging (MRI), while optical tracking employs dye-conjugated nanoparticles. In gene delivery, polymeric nanoparticles like polyethylenimine (PEI) and dendrimers, graphene-based carriers, and chitosan nanoparticles offer alternatives to virus-mediated gene transfer. The potential of magnetic nanoparticles in gene therapy is explored, particularly in hepatocellular carcinoma. Overall, nanoparticles have transformative potential in cardiovascular disease management, with ongoing research poised to enhance clinical outcomes.

Method for assessing coating uniformity of angioplasty balloons coated with poly(lactic-co-glycolic acid) nanoparticles loaded with quercetin

In this study, we aim to quantify coating uniformity and correlate fluorescence intensity to drug loading for drug-coated angioplasty balloons (DCB) coated with 5, 10, 15, or 20 layers of poly(lactic-co-glycolic acid) nanoparticles (NPs) entrapped with quercetin. Uniformity was quantified from histograms and horizontal line profiles of microscopic fluorescent images acquired with sample specific parameters, and cracks in the coating were measured and counted. The fluorescence of images acquired with global parameters was correlated with quercetin loading measured via gravimetric/HPLC analysis. More layers on DCBs may be associated with less uniform coatings, as indicated by differences in histogram standard deviations. The line profile percent deviation from average for each sample was <20%. Cracks were present on all balloons, but their length was not significantly different between samples. The 5-layer DCBs had the fewest cracks, whereas the 15-layer DCBs had the most cracks. A strong positive correlation (R = 0.896) was identified between fluorescence intensity and drug loading. A relationship between the number of layers and coating uniformity seems to exist, but further investigations are required for confirmation. Fluorescence intensity appears to strongly predict drug loading, demonstrating that fluorescent imaging may be a viable alternative to drug release studies.

Structure of polymeric nanoparticles encapsulating a drug - pamoic acid ion pair by scanning transmission electron microscopy

Drug-delivery systems based on polymeric nanoparticles are useful for improving drug bioavailability and/or delivery of the active ingredient for example directly to the cancerous tumour. The physical and chemical characterization of a functionalized nanoparticle system is required to measure drug loading and dispersion but also to understand and model the rate and extent of drug release to help predict performance. Many techniques can be used, however, difficulties related to structure determination and identifying the precise location of the drug fraction make mathematical prediction complex and in many published examples the final conclusions are based on assumptions regarding an expected structure. Cryogenic scanning transmission electron microscopy imaging in combination with electron energy loss spectroscopy techniques are used here to address this issue and provide a multi-modal approach to the characterisation of a self-assembled polymeric nanoparticle system based upon a polylactic acid - polyethylene glycol (PLA-PEG) block copolymer containing a hydrophobic ion-pair between pamoic acid and an active pharmaceutical ingredient (API). Results indicate a regular dispersion of spherical nanoparticles of 88 ± 9 nm diameter. The particles are shown to have a multi-layer structure consisting of a 25 nm radius hydrophobic core of PLA and pamoic acid-API material with additional enrichment of the pamoic acid-API material within the inner core (that can be off-centre), surrounded by a 9 nm dense PLA-PEG layer all with a low-density PEG surface coating of around 10 nm thickness. This structure suggests that release of the API can only occur by diffusion through or degradation of the dense, 9 nm thick PLA-PEG layer either of which is a process consistent with the previously reported steady release kinetics of the API and counter ion from these nanoparticle formulations. Establishing accurate measures of product structure enables a link to performance by providing appropriate physical parameters for future mathematical modelling of barriers controlling API release in these nanoparticle formulations.

Impact of nanotechnology on the oral delivery of phyto-bioactive compounds

Nanotechnology is an advanced field that has remarkable nutraceutical and food applications. Phyto-bioactive compounds (PBCs) play critical roles in promoting health and disease treatment. However, PBCs generally encounter several limitations that delay their widespread application. For example, most PBCs have low aqueous solubility, poor biostability, poor bioavailability, and a lack of target specificity. Moreover, the high concentrations of effective PBC doses also limit their application. As a result, encapsulating PBCs into an appropriate nanocarrier may increase their solubility and biostability and protect them from premature degradation. Moreover, nanoencapsulation could improve absorption and prolong circulation with a high opportunity for targeted delivery that may decrease unwanted toxicity. This review addresses the main parameters, variables, and barriers that control and affect oral PBC delivery. Moreover, this review discusses the potential role of biocompatible and biodegradable nanocarriers in improving the water solubility, chemical stability, bioavailability, and specificity/selectivity of PBCs.

Method for assessing coating uniformity of angioplasty balloons coated with poly(lactic-co-glycolic acid) nanoparticles loaded with quercetin

Significance

Drug-coated angioplasty balloons (DCBs) are used to treat peripheral artery disease, and proper dosage depends on coating characteristics like uniformity and number of layers.

Aim

Quantify coating uniformity and correlate fluorescence intensity to drug loading for DCBs coated with 5, 10, 15, or 20 layers of poly(lactic-co-glycolic acid) nanoparticles (NPs) entrapped with quercetin.

Approach

Images of DCBs were acquired using fluorescence microscopy. Coating uniformity was quantified from histograms and horizontal line profiles, and cracks on the balloons were measured and counted. Fluorescence intensity was correlated with the drug loading of quercetin found from gravimetric analysis coupled with high-performance liquid chromatography (HPLC).

Results

Higher numbers of coating layers on DCBs may be associated with less uniform coatings. Cracks in the coating were present on all balloons, and the length of cracks was not significantly different between balloons coated with different numbers of layers or balloons coated with the same number of layers. A strong positive correlation was identified between fluorescence intensity and drug loading.

Conclusion

There may be a relationship between the number of NP layers and the uniformity of the coating, but further investigation is needed to confirm this. Fluorescence intensity appears to be a strong predictor of drug loading on DCBs coated with quercetin-entrapped NPs, demonstrating that fluorescent imaging may be a viable alternative to drug release studies.

Nanoparticles in Drug Delivery: From History to Therapeutic Applications

Current research into the role of engineered nanoparticles in drug delivery systems (DDSs) for medical purposes has developed numerous fascinating nanocarriers. This paper reviews the various conventionally used and current used carriage system to deliver drugs. Due to numerous drawbacks of conventional DDSs, nanocarriers have gained immense interest. Nanocarriers like polymeric nanoparticles, mesoporous nanoparticles, nanomaterials, carbon nanotubes, dendrimers, liposomes, metallic nanoparticles, nanomedicine, and engineered nanomaterials are used as carriage systems for targeted delivery at specific sites of affected areas in the body. Nanomedicine has rapidly grown to treat certain diseases like brain cancer, lung cancer, breast cancer, cardiovascular diseases, and many others. These nanomedicines can improve drug bioavailability and drug absorption time, reduce release time, eliminate drug aggregation, and enhance drug solubility in the blood. Nanomedicine has introduced a new era for drug carriage by refining the therapeutic directories of the energetic pharmaceutical elements engineered within nanoparticles. In this context, the vital information on engineered nanoparticles was reviewed and conferred towards the role in drug carriage systems to treat many ailments. All these nanocarriers were tested in vitro and in vivo. In the coming years, nanomedicines can improve human health more effectively by adding more advanced techniques into the drug delivery system.

Recent advancements in enzyme-incorporated nanomaterials: Synthesis, mechanistic formation, and applications

Over the past decade, nanotechnology has been developed and employed across various entities. Among the numerous nanostructured material types, enzyme-incorporated nanomaterials have shown great potential in various fields, as an alternative to biologically derived as well as synthetically developed hybrid structures. The mechanism of incorporating enzyme onto a nanostructure depends on several factors including the method of immobilization, type of nanomaterial, as well as operational and environmental conditions. The prospects of enzyme-incorporated nanomaterials have shown promising results across various applications, such as biocatalysts, biosensors, drug therapy, and wastewater treatment. This is due to their excellent ability to exhibit chemical and physical properties such as high surface-to-volume ratio, recovery and/or reusability rates, sensitivity, response scale, and stable catalytic activity across wide operating conditions. In this review, the evolution of enzyme-incorporated nanomaterials along with their impact on our society due to its state-of-the-art properties, and its significance across different industrial applications are discussed. In addition, the weakness and future prospects of enzyme-incorporated nanomaterials were also discussed to guide scientists for futuristic research and development in this field.

Application of nickel chitosan nanoconjugate as an antifungal agent for combating Fusarium rot of wheat

Agro-researchers are endlessly trying to derive a potential biomolecule having antifungal properties in order to replace the application of synthetic fungicides on agricultural fields. Rot disease often caused by Fusarium solani made severe loss of wheat crops every year. Chitosan and its metallic nano-derivatives hold a broad-spectrum antifungal property. Our interdisciplinary study deals with the application of nickel chitosan nanoconjugate (NiCNC) against Fusarium rot of wheat, in comparison with chitosan nanoparticles (CNPs) and commercial fungicide Mancozeb. CNPs and NiCNC were characterized on the basis of UV–Vis spectrophotometry, HR-TEM, FESEM, EDXS and FT-IR. Both CNPs and NiCNC were found effective against the fungal growth, of which NiCNC at 0.04 mg/mL showed complete termination of F. solani grown in suitable medium. Ultrastructural analysis of F. solani conidia treated with NiCNC revealed pronounced damages and disruption of the membrane surface. Fluorescence microscopic study revealed generation of oxidative stress in the fungal system upon NiCNC exposure. Moreover, NiCNC showed reduction in rot disease incidence by 83.33% of wheat seedlings which was further confirmed through the observation of anatomical sections of the stem. NiCNC application helps the seedling to overcome the adverse effect of pathogen, which was evaluated through stress indices attributes.

Therapeutic Properties of PDMS Nanoparticles: A Promising New Drug Delivery Vehicle Against Inflammatory Conditions

BACKGROUND

Over the last few decades, there has been a stupendous change in the area of drug delivery using particulate delivery systems, with increasing focus on nanoparticles in recent times. Nanoparticles helps to improve and alter the pharmacodynamic properties and pharmacokinetics of various types of drug molecules. These features help to protect the drug entity in the systemic circulation, access of the drug to the chosen sites, and to deliver the drug in a controlled and sustained rate at the site of action.

OBJECTIVE

Nanoparticle based targeted delivery of anti-inflammatory drugs/signal modulatory agents to the cytoplasm or nuclei of the targeted cell can significantly enhance the precision and efficacy of intended therapeutic activity. To this end, we report ligand free, enhanced intra-nuclear delivery model of anti-inflammatory therapeutics via PDMS nanoparticles.

METHOD

PDMS nanoparticles were prepared by sacrificial silica template-based approach and details of their characterization for suitability as a nanoparticle-based delivery material is detailed herein.

RESULTS

Biological evaluation for compatibility was carried out and the results showed that the PDMS nanoparticle has no toxicity on RAW 264.7 cells in the concentration range of 10, 20, 40, 60, 80, 100 and 120 μg/mL in culture. Biocompatibility and absence of toxicity was determined by morphological examination and cell viability assays. Drug loading and release kinetics were carried out with the anti-inflammatory drug Diclofenac.

CONCLUSION

In this paper we clearly demonstrate the various aspects of nanoparticle articulation, characterization, effect of their characteristics and their applications as a non-toxic drug delivery molecule for its potential applications in therapeutic delivery of drugs for sustained release.

Biodegradable Nanoparticles: A Recent Approach and Applications

Biodegradable nanoparticles (NPs) are the novel carriers for the administration of drug molecules. Biodegradable nanoparticles have become popular recently because of their special features such as targeted delivery of drugs, improved bioavailability, and better therapeutic effectiveness to administer the drug at a constant rate. Polymeric NPs are very small-sized polymeric colloidal elements in which a drug of interest may be encapsulated or incorporated in their polymeric network or conjugated or adsorbed on the layer. Various polymers are employed in the manufacturing of nanoparticles, some of the frequently employed polymers are agents, chitosan, cellulose, gelatin, gliadin, polylactic acid, polylactic-co-glycolic acid, and pullulan. Nanoparticles have been progressively explored for the delivery of targeted ARVs to cells of HIV-infected and have performed the prolonged kinetic release. Drug embedded in this system can give better effectiveness, diminished resistance of drugs, reduction in systemic toxicity and symptoms, and also enhanced patient compliance. The present review highlights the frequently employed manufacturing methods for biodegradable nanoparticles, various polymers used, and its application in anti-retroviral therapy. Also, common evaluation parameters to check the purity of nanoparticles, ongoing and recently concluded clinical trials and patents filled by the various researchers, and the future implication of biodegradable NPs in an innovative drug delivery system are described. The biodegradable NPs are promising systems for the administration of a broad variety of drugs including anti-retroviral drugs, and hence biodegradable nanoparticles can be employed in the future for the treatment of several diseases and disorders.

Nanoparticle-Mediated Drug Delivery for the Treatment of Cardiovascular Diseases

Cardiovascular diseases (CVDs) are one of the foremost causes of high morbidity and mortality globally. Preventive, diagnostic, and treatment measures available for CVDs are not very useful, which demands promising alternative methods. Nanoscience and nanotechnology open a new window in the area of CVDs with an opportunity to achieve effective treatment, better prognosis, and less adverse effects on non-target tissues. The application of nanoparticles and nanocarriers in the area of cardiology has gathered much attention due to the properties such as passive and active targeting to the cardiac tissues, improved target specificity, and sensitivity. It has reported that more than 50% of CVDs can be treated effectively through the use of nanotechnology. The main goal of this review is to explore the recent advancements in nanoparticle-based cardiovascular drug carriers. This review also summarizes the difficulties associated with the conventional treatment modalities in comparison to the nanomedicine for CVDs.

Polydopamine-Modified Copper-Doped Titanium Dioxide Nanotube Arrays for Copper-Catalyzed Controlled Endogenous Nitric Oxide Release and Improved Re-Endothelialization

The controllable release is necessary for ideal drug delivery technologies. Because of their high specific surface area and high porosity, titanium dioxide nanotubes (TNTs) have been widely used as drug carriers in medical devices. By loading copper as the catalyst, nitric oxide (NO) generation was facilitated by catalyzing the decomposition of renewable endogenous NO donors in vivo. Herein, the long-term controllable release profile of NO is highlighted owing to the multilayer polydopamine (PDA) cap structure. Different layers of PDA are used to adjust the NO release behavior, and the results show that three layers of PDA can not only effectively prevent the burst release of NO but also maintain long-term stable release of copper ion and NO. The bioactivity of the NO generated from three-layer PDA-modified copper-loaded TNTs (PDA-3L-NTCu2) and unmodified copper-loaded TNTs (NTCu2) are verified by our work, indicating effective inhibition of platelet activation, thrombosis, inflammation, and intimal hyperplasia. Importantly, the PDA-3L-NTCu2 show selectively promote the growth of endothelial cells in vitro and outstanding re-endothelialization for 4 weeks in vivo, as compared to NTCu2, TNTs, and 316L stain steel. This study suggests that copper-loaded with PDA modification helps us achieve controlled long-term stable local NO release with well-retained bioactivity and enhanced re-endothelialization.

Biodelivery of nerve growth factor and gold nanoparticles encapsulated in chitosan nanoparticles for schwann-like cells differentiation of human adipose-derived stem cells

The constant release of neurotrophic factors through a nanomaterial-based delivery system can be an important strategy in medical and pharmaceutical fields for nerve tissue engineering. The present study was aimed at encapsulating NGF and AuNPs in chitosan nanoparticles (NGF-CNPs and AuNPs-CSNPs) and its evaluation on the differentiation potential of human adipose-derived stem cells (h-ADSCs) to Schwann-like cells. The NGF-CNPs were prepared by ionotropic gelation method with tripolyphosphate (TPP) as a crosslinker. After synthesis and characterization of nanoparticles, NGF encapsulation efficiency and release profile were observed by Bradford assay. Next, the effects of NGF-CSNPs and AuNPs-CSNPs on h-ADSCs survival were assessed through MTT assay. Also, the efficacy of Schwann-like cells differentiation was assessed by immunocytochemistry and real-time RT-PCR for S100β and MBP markers. NGF encapsulation efficiency was found about 85% and controlled and sustained release of NGF was observed during 7 days in vitro (74.63 ± 2.07%). The findings revealed that these nanoparticles are cytocompatible. The immunocytochemical analysis indicated that NGF-CSNPs and AuNPs-CSNPs could significantly increase the differentiated rate and myelinogenic potential of Schwann-like cells (p < 0.05). Besides, the expression level of GFAP, S100β, and MBP demonstrated significant upregulation in NGF-CSNPs and AuNPs-CSNPs groups compared to the control group (p < 0.05). Hence, it can be proposed that NGF-CNPs and AuNPs-CSNPs are capable of controlled release with improving the ability of h-ADSCs differentiation to Schwann-like cells. Also, the results show the potential future application of this differentiation in nerve tissue regeneration.

Nanoparticle systems for cancer vaccine

As effective tools for public health, vaccines prevent disease by priming the body's adaptive and innate immune responses against an infection. Due to advances in understanding cancers and their relationship with the immune system, there is a growing interest in priming host immune defenses for a targeted and complete antitumor response. Nanoparticle systems have shown to be promising tools for effective antigen delivery as vaccines and/or for potentiating immune response as adjuvants. Here, we highlight relevant physiological processes involved in vaccine delivery, review recent advances in the use of nanoparticle systems for vaccines and discuss pertinent challenges to viably translate nanoparticle-based vaccines and adjuvants for public use.

Biodistribution, Safety and Organ Toxicity of Docetaxel-Loaded in HER-2 Aptamer Conjugated Ecoflex® Nanoparticles in a Mouse Xenograft Model of Ovarian Cancer

BACKGROUND

Docetaxel is a notably efficient anticancer drug administered for several types of malignancies including ovarian cancer. However, various side effects caused either by the nonspecific distribution of the active ingredient or by high contents of Tween 80 and ethanol in the currently marketed formulations, could even deprive the patients of the treatment.

OBJECTIVES

In the current study, a novel targeted delivery system composed of Ecoflex® polymeric nanoparticles loaded with docetaxel and equipped with HER-2 specific aptamer molecules was evaluated regarding blood and tissue toxicity, and biodistribution.

METHOD

The tumor-bearing nude mice, achieved by subcutaneous injection of SKOV-3 cells, were divided into four groups treated with normal saline, Taxotere®, targeted docetaxel nanoparticles, and non-targeted docetaxel nanoparticles. Few patents were alos cied in the article.

RESULTS

According to the results of hematologic evaluations, almost all hematologic parameters were in normal range with no significant difference among the four groups. Histopathological studies revealed that treatment with targeted nanoparticles caused a remarkable reduction in mitosis in tumor sections and overall reduced organ toxicity compared with Taxotere®. The only exception was spleen in which more damage was caused by the nanoparticles. The results of the biodistribution study were also in accordance with pathological assessments, with significantly lower drug concentration in non-tumor tissues, except for spleen, when targeted nanoparticles were used compared with Taxotere®.

CONCLUSION

These results could evidence the efficiency of the targeted delivery system in concentrating the drug cargo mostly in its site of action leading to the elimination of its adverse effects caused by exposure of other tissues to the cytotoxic agent.

Nanoparticle eluting-angioplasty balloons to treat cardiovascular diseases

Nanoparticles (NPs) can be used to locally deliver anti-restenosis drugs when they are infused directly to the injured arteries after intervention procedures such as angioplasty. However, the efficacy of transferring NPs via infusion to the arterial wall is limited, at least partially, due to poor NP retention on the inner artery wall. To improve NP retention, angioplasty balloons coated with drug-loaded NPs were fabricated via either layer-by-layer (LbL) electrostatic coating or acrylic-based hydrogel (AAH) coating techniques. Three types of NPs, namely poly (lactide-co-glycolide) (PLGA), biodegradable photo-luminescent PLGA and urethane doped polyester were studied. The transfer efficacy of NPs from various coatings to the arterial wall were further evaluated to find the optimal coating conditions. The ex vivo NP transfer studies showed significantly more NPs being transferred to the rat arterial wall after the angioplasty procedure by the AAH coating (95% transfer efficiency) compared to that of the LbL technique (60%) and dip coating (20%) under flow conditions (10 dyn/cm²). Our results suggest that the AAH coating of drug-loaded NPs on the angioplasty balloon could potentially provide superior retention of drug-loaded NPs onto the arterial wall for a better local delivery of drug-loaded NPs to effectively treat arterial diseases.

Nanoparticles and Controlled Delivery for Bioactive Compounds: Outlining Challenges for New "Smart-Foods" for Health

Nanotechnology is a field of research that has been stressed as a very valuable approach for the prevention and treatment of different human health disorders. This has been stressed as a delivery system for the therapeutic fight against an array of pathophysiological situations. Actually, industry has applied this technology in the search for new oral delivery alternatives obtained upon the modification of the solubility properties of bioactive compounds. Significant works have been made in the last years for testing the input that nanomaterials and nanoparticles provide for an array of pathophysiological situations. In this frame, this review addresses general questions concerning the extent to which nanoparticles offer alternatives that improve therapeutic value, while avoid toxicity, by releasing bioactive compounds specifically to target tissues affected by specific chemical and pathophysiological settings. In this regard, to date, the contribution of nanoparticles to protect encapsulated bioactive compounds from degradation as a result of gastrointestinal digestion and cellular metabolism, to enable their release in a controlled manner, enhancing biodistribution of bioactive compounds, and to allow them to target those tissues affected by biological disturbances has been demonstrated.

Engineering of a New Bisphosphonate Monomer and Nanoparticles of Narrow Size Distribution for Antibacterial Applications

In recent years, many bacteria have developed resistance to commonly used antibiotics. It is well-known that calcium is essential for bacterial function and cell wall stability. Bisphosphonates (BPs) have high affinity to calcium ions and are effective calcium chelators. Therefore, BPs could potentially be used as antibacterial agents. This article provides a detailed description regarding the synthesis of a unique BP vinylic monomer MA-Glu-BP (methacrylate glutamate bisphosphonate) and polyMA-Glu-BP nanoparticles (NPs) for antibacterial applications. polyMA-Glu-BP NPs were synthesized by dispersion copolymerization of the MA-Glu-BP monomer with the primary amino monomer N-(3-aminopropyl)methacrylamide hydrochloride (APMA) and the cross-linker monomer tetra ethylene glycol diacrylate, to form cross-linked NPs with a narrow size distribution. The size and size distribution of polyMA-Glu-BP NPs were controlled by changing various polymerization parameters. Near-infrared fluorescent polyMA-Glu-BP NPs were prepared by covalent binding of the dye cyanine7 N-hydroxysuccinimide to the primary amino groups belonging to the APMA monomeric units on the polyMA-Glu-BP NPs. The affinity of the near-infrared fluorescent polyMA-Glu-BP NPs toward calcium was demonstrated in vitro by a coral model. Cytotoxicity, cell uptake, and antibacterial properties of the polyMA-Glu-BP NPs against two common bacterial pathogens representing Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and two representing Gram-positive bacteria, Listeria innocua and Staphylococcus aureus, were then demonstrated.

Anthocyanins encapsulated by PLGA@PEG nanoparticles potentially improved its free radical scavenging capabilities via p38/JNK pathway against Aβ1-42-induced oxidative stress

BACKGROUND

In order to increase the bioavailability of hydrophilic unstable drugs like anthocyanins, we employed a polymer-based nanoparticles approach due to its unique properties such as high stability, improved bioavailability and high water-soluble drug loading efficiency. Anthocyanins constitute a subfamily of flavonoids that possess anti-oxidative, anti-inflammatory and neuroprotective properties. However, anthocyanins are unstable because their phenolic hydroxyl groups are easily oxidized into quinones, causing a reduced biological activity. To overcome this drawback and improve the free radical scavenging capabilities of anthocyanins, in the current study we for the first time encapsulated the anthocyanins in biodegradable nanoparticle formulation based on poly (lactide-co-glycolide) (PLGA) and a stabilizer polyethylene glycol (PEG)-2000. The biological activity and neuroprotective effect of anthocyanin loaded nanoparticles (An-NPs) were investigated in SH-SY5Y cell lines.

RESULTS

Morphological examination under transmission electron microscopy (TEM) showed the formation of smooth spherically shaped nanoparticles. The average particle size and zeta potential of An-NPs were in the range of 120-165 nm and -12 mV respectively, with a low polydispersity index (0.4) and displayed a biphasic release profile in vitro. Anthocyanins encapsulation in PLGA@PEG nanoparticles (NPs) did not destroy its inherent properties and exhibit more potent neuroprotective properties. An-NPs were nontoxic to SH-SY5Y cells and increased their cell viability against Aβ_1-42 by its free radical scavenging characteristics and abrogated ROS generation via the p38-MAPK/JNK pathways accompanied by induction of endogenous nuclear factor erythroid 2-related factor 2 (Nrf2) and heme oxygenase 1 (HO-1). Comparative to native bulk anthocyanins, An-NPs effectively attenuated Alzheimer's markers like APP (amyloid precursor protein), BACE-1 (beta-site amyloid precursor protein cleaving enzyme 1), neuroinflammatory markers such as p-NF-kB (phospho-nuclear factor kappa B), TNF-α (tumor necrosis factor) and iNOS (inducible nitric oxide synthase) and neuroapoptotic markers including Bax, Bcl₂, and Caspase-3 protein expressions accompanied by neurodegeneration against Aβ_1-42 in SH-SY5Y cell lines.

CONCLUSIONS

Overall, this data not only confirmed the therapeutic potential of anthocyanins in reducing AD pathology but also offer an effective way to improve the efficiency of anthocyanins through the use of nanodrug delivery systems.

Nanoparticles: Alternatives Against Drug-Resistant Pathogenic Microbes

Antimicrobial substances may be synthetic, semisynthetic, or of natural origin (i.e., from plants and animals). Antimicrobials are considered "miracle drugs" and can determine if an infected patient/animal recovers or dies. However, the misuse of antimicrobials has led to the development of multi-drug-resistant bacteria, which is one of the greatest challenges for healthcare practitioners and is a significant global threat. The major concern with the development of antimicrobial resistance is the spread of resistant organisms. The replacement of conventional antimicrobials by new technology to counteract antimicrobial resistance is ongoing. Nanotechnology-driven innovations provide hope for patients and practitioners in overcoming the problem of drug resistance. Nanomaterials have tremendous potential in both the medical and veterinary fields. Several nanostructures comprising metallic particles have been developed to counteract microbial pathogens. The effectiveness of nanoparticles (NPs) depends on the interaction between the microorganism and the NPs. The development of effective nanomaterials requires in-depth knowledge of the physicochemical properties of NPs and the biological aspects of microorganisms. However, the risks associated with using NPs in healthcare need to be addressed. The present review highlights the antimicrobial effects of various nanomaterials and their potential advantages, drawbacks, or side effects. In addition, this comprehensive information may be useful in the discovery of broad-spectrum antimicrobial drugs for use against multi-drug-resistant microbial pathogens in the near future.

Applications of electrospinning/electrospraying in drug delivery

During recent years, nanoscaled materials have gained much attention because of their applications in the field of pharmaceutical and biomedical sciences. Electrospinning/electrospraying, as simple, effective and single-step methods, are used in the preparation of nanostructured materials (nanofibers and nanobeads). They offer an opportunity for direct encapsulation of the different types of drug molecules. The generated nanomaterials possess high surface area with porous characteristics, and the liberation of the loaded drugs follows a controlled-release pattern. Because of their wide applications in medical/pharmaceutical researches, the aim of this editorial is to highlight the importance of electrospinning/electrospraying technologies in drug delivery.

Formation, characterization and release kinetics of chitosan/γ-PGA encapsulated nisin nanoparticles

To improve its efficiency, nisin was encapsulated in a γ-PGA and chitosan nanoparticles using self-assembly method. The release of nisin from the nanoparticles exhibited a pH-dependent pattern, and the release mechanism was an anomalous behavior.

The metamorphosis of vascular stents: passive structures to smart devices

The role of nanotechnology enabled techniques in the evolution of vascular stents.

Spectroscopic studies and antibacterial activities of pure and various levels of Cu-doped BaSO₄ nanoparticles

The present study was made to design the pure and various levels of Cu doped (0.025 M, 0.05 M and 0.075 M) BaSO4 NPs synthesized by chemical precipitation method. The synthesized products have been characterised by X-ray Diffractometer (XRD), Fourier transform infrared (FT-IR) spectrometer, thermogravimetric and differential thermal analysis (TG-DTA), UV-Vis-diffused reflectance spectroscopy (UV-Vis-DRS), field emission-scanning electron microscopy with energy dispersive spectroscopy (FE-SEM with EDS), transmission electron microscopy (TEM) and application oriented study like antibacterial activity also reported. The result determined from XRD was affirmed by the results obtained from electron microscopic measurements. XRD study revealed that the synthesized products were composed of orthorhombic structure and highly crystalline in nature. Furthermore, flaky like morphology of pure and Cu-BaSO4 nanoparticles have been observed from the images obtained from these studies. The existence of Cu(2+) was confirmed by EDS analysis. The functional groups of the synthesized samples were analysed by FT-IR study. The band gap energies of pure and doped samples were accomplished using UV-Vis-DRS analysis. Also, the kinetic parameters were evaluated and reported from the thermal stability of nanoparticles. Eventually, gram-negative bacteria shows the less antibacterial activities compared to gram-positive bacteria due to adsorption of BaSO4 nanoparticles on the surface of the used bacteria.

pH dependent chemical stability and release of methotrexate from a novel nanoceramic carrier

The study reveals maximum chemical stability of methotrexate in LDH–MTX at pH 7.00 and controlled release profile of PLGA–LDH–MTX.

Perspective and potential of oral lipid-based delivery to optimize pharmacological therapies against cardiovascular diseases

Cardiovascular diseases (CVDs) remain the major cause of morbidity and mortality globally. Despite the large number of cardiovascular drugs available for pharmacological therapies, factors limiting the efficient oral use are identified, including low water solubility, pre-systemic metabolism, food intake effects and short half-life. Numerous in vivo proof-of-concepts studies are presented to highlight the viability of lipid-based delivery to optimize the oral delivery of cardiovascular drugs. In particular, the key performance enhancement roles of oral lipid-based drug delivery systems (LBDDSs) are identified, which include i) improving the oral bioavailability, ii) sustaining/controlling drug release, iii) improving drug stability, iv) reducing food intake effect, v) targeting to injured sites, and vi) potential for combination therapy. Mechanisms involved in achieving these features, range of applicability, and limits of available systems are detailed. Future research and development efforts to address these issues are discussed, which is of significant value in directing future research work in fostering translation of lipid-based formulations into clinical applications to reduce the prevalence of CVDs.

Dexamethasone dipropionate loaded nanoparticles of α-elastin-g-PLGA for potential treatment of restenosis

A graft copolymer of α-elastin with poly(lactic-co-glycolic) acid (PLGA) has been synthesized and successfully employed to produce nanoparticles. Exploiting the known biological activity of α-elastin to promote the maintenance of smooth muscle cells (SMCs) contractile phenotype and the antiproliferative effect of glucocorticoids, the aim of this research was to produce drug-loaded nanoparticles suitable for potential treatment of restenosis. In particular, nanoparticles of α-elastin-g-PLGA with a mean size of 200 nm have been produced and loaded with dexamethasone dipropionate (10% w/w), chosen as a model drug that inhibits proliferation of vascular SMCs. These nanoparticles are able to prolong the drug release and show a pronounced sensibility to elastase. Drug unloaded nanoparticles stimulate the differentiation of human umbilical artery smooth muscle cells (HUASMCs) toward the contractile phenotype as demonstrated by immunofluorescence, flow cytofluorimetric, and western blotting analyses. Finally, drug-loaded nanoparticles efficiently reduce viability of HUASMCs as evidenced by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2- (4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay.

Efficacy of reversal of aortic calcification by chelating agents

Elastin-specific medial vascular calcification, termed "Monckeberg's sclerosis," has been recognized as a major risk factor for various cardiovascular events. We hypothesize that chelating agents, such as disodium ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), and sodium thiosulfate (STS) might reverse elastin calcification by directly removing calcium from calcified tissues into soluble calcium complexes. We assessed the chelating ability of EDTA, DTPA, and STS on removal of calcium from hydroxyapatite (HA) powder, calcified porcine aortic elastin, and calcified human aorta in vitro. We show that both EDTA and DTPA could effectively remove calcium from HA and calcified tissues, while STS was not effective. The tissue architecture was not altered during chelation. In the animal model of aortic elastin-specific calcification, we further show that local periadventitial delivery of EDTA loaded in to poly(lactic-co-glycolic acid) nanoparticles regressed elastin-specific calcification in the aorta. Collectively, the data indicate that elastin-specific medial vascular calcification could be reversed by chelating agents.

Effects of particle size and surface modification on cellular uptake and biodistribution of polymeric nanoparticles for drug delivery

PURPOSE

To investigate the effects of the particle size and surface coating on the cellular uptake of the polymeric nanoparticles for drug delivery across the physiological drug barrier with emphasis on the gastrointestinal (GI) barrier for oral chemotherapy and the blood-brain barrier (BBB) for imaging and therapy of brain cancer.

METHODS

Various sizes of commercial fluorescent polystyrene nanoparticles (PS NPs) (viz 20 50, 100, 200 and 500 nm) were modified with the d-α-tocopheryl polyethylene glycol 1,000 succinate (vitamin E TPGS or TPGS). The size, surface charge and surface morphology of PS NPs before and after TPGS modification were characterized. The Caco-2 and MDCK cells were employed as an in vitro model of the GI barrier for oral and the BBB for drug delivery into the central nerve system respectively. The distribution of fluorescent NPs after i.v. administration to rats was analyzed by the high performance liquid chromatography (HPLC).

RESULTS

The in vitro investigation showed enhanced cellular uptake efficiency for PS NPs in both of Caco-2 and MDCK cells after TPGS surface coating. In vivo investigation showed that the particle size and surface coating are the two parameters which can dramatically influence the NPs biodistribution after intravenous administration. The TPGS coated NPs of smaller size (< 200 nm) can escape from recognition by the reticuloendothelial system (RES) and thus prolong the half-life of the NPs in the blood system.

CONCLUSIONS

TPGS-coated PS NPs of 100 and 200 nm sizes have potential to deliver the drug across the GI barrier and the BBB.

Antioxidant potential of all-trans retinoic acid (ATRA) and enhanced activity of liposome encapsulated ATRA against inflammation and tumor-directed angiogenesis

The purpose of this study was to investigate whether all-trans retinoic acid (ATRA) has antioxidant property. The study was also focused on its inhibitory effect on the acute and chronic inflammation and tumor-associated capillary formation in terms of angiogenesis in C57BL/6 mice after incorporated in liposome composed of distearoylphosphatidylcholine (DSPC/cholesterol). ATRA possesses a number of important biologic activities including oncostatic, antioxidant and immunostimulatory actions. Our study was designed to evaluate the antioxidant activity of free ATRA by nitric oxide scavenging, superoxide radical scavenging, hydroxyl radical scavenging and lipid peroxide scavenging assays. The ATRA showed significant scavenging activities in all these antioxidant assays comparable to the standard antioxidant. We have also evaluated the activity of encapsulated ATRA against anti-inflammatory activity in C57BL/6 mice. The paw oedema inhibition was found in carrageenan model as 55.56% and 66.67% for free ATRA and encapsulated ATRA treatment respectively and for formaldehyde model it was found to be 60.87% and 69.57% respectively compared with saline treated control mice. Encapsulated ATRA inhibited the tumor-associated capillary formation in mice induced by highly metastatic B16F10 melanoma cells significantly than the free ATRA did. In this study the inhibition of tumor-directed capillary formation was found to be 56.25% and 62.50% for free ATRA and encapsulated ATRA treatment respectively. In conclusion, ATRA showed a significant antioxidant property in vitro. Free ATRA has anti-inflammatory activity as proved by us in animal model of acute and chronic inflammation and antiangiogenesis activity. Furthermore, its activity was boosted by encapsulation in liposome.

Treatment of acute thromboembolism in mice using heparin-conjugated carbon nanocapsules

The unsurpassed properties in electrical conductivity, thermal conductivity, strength, and surface area-to-volume ratio allow for many potential applications of carbon nanomaterials in various fields. Recently, studies have characterized the potential of using carbon nanotubes (CNTs) as a biomaterial for biomedical applications and as a drug carrier via intravenous injection. However, most studies show that unmodified CNTs possess a high degree of toxicity and cause inflammation, mechanical obstruction from high organ retention, and other biocompatibility issues following in vivo delivery. In contrast, carbon nanocapsules (CNCs) have a lower aspect ratio compared with CNTs and have a higher dispersion rate. To investigate the possibility of using CNCs as an alternative to CNTs for drug delivery, heparin-conjugated CNCs (CNC-H) were studied in a mouse model of acute hindlimb thromboembolism. Our results showed that CNC-H not only displayed superior antithrombotic activity in vitro and in vivo but they also had the ability to extend the thrombus formation time far longer than an injection of heparin or CNCs alone. Therefore, the present study showed for the first time that functionalized CNCs can act as nanocarriers to deliver thrombolytic therapeutics.

Development of docetaxel-loaded vitamin E TPGS micelles: formulation optimization, effects on brain cancer cells and biodistribution in rats

Aim: This work aimed to develop docetaxel-loaded D-α-tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS or TPGS) micelles for brain cancer chemotherapy by taking advantage of polyethylene glycol for its long half-life in circulation and vitamin E for its high cellular uptake. Material & methods: TPGS micelles containing docetaxel or coumarin-6 were prepared by the solvent casting method and the direct dissolution method at high, moderate and low drug-loading levels. Results & discussion: The particle size of the docetaxel-loaded TPGS micelles ranged between 12 and 14 nm. Docetaxel formulated in the TPGS micelles of high, moderate and low drug-loading levels achieved lower IC50 values compared with Taxotere® after 24-h incubation with C6 glioma brain cancer cells. The TPGS has much lower critical micelle concentration than most phospholipids in micellar formulation, which can be an efficient drug carrier across the blood brain–barrier with high drug encapsulation efficiency, cell uptake, cytotoxicity and desired biodistribution of the formulated drug.

Original submitted: 21 March 2011; Revised submitted: 14th June 2011