High-performance liquid chromatographic assay of hydroxyl free radical using salicylic acid hydroxylation during in vitro experiments involving thiols

Genistein microparticles prepared by antisolvent recrystallization with low-speed homogenization process

To create genistein particles, a brand-new antisolvent recrystallization technique was employed. The response surface approach was utilized to optimize the single factor test findings, which were acquired via the preliminary tests. The ideal liquid-to-liquid ratio was 9, the solution concentration was 21 mg/mL, the nozzle diameter was 700 μm, the feed rate was 39.65 mL/min, and the homogenization rate was 1500 rpm. The smallest mean particle size measured was 202.782 nm. SEM was used to study the powder's morphology, while thermal analysis and infrared imaging were used to evaluate its characteristics. The homogeneous antisolvent recrystallization method-prepared GMP has a better dissolving rate and stronger antioxidant activity when compared to genistein powder. The antisolvent recrystallization approach used in this study, which uses low-speed homogenizing instead of conventional grinding and homogenizing, can successfully reduce particle size, improve bioavailability, and use less energy. This topic may thus be made popular because it has real-world applications.

The interference of marine accidental and persistent petroleum hydrocarbons pollution on primary biomass and trace elements sink

More than 80 % of the primary biomass in marine environments is provided by phytoplankton. The primary mechanism in the trace element sink is the absorption of trace elements by phytoplankton. Because of their difficult degradability and bioaccumulation, petroleum hydrocarbons are one of the most significant and priority organic contaminants in the marine environment. This study chose Chlorella pyrenoidosa as the model alga to be exposed to short and medium-term petroleum hydrocarbons. The ecological risk of accidental and persistent petroleum hydrocarbon contamination was thoroughly assessed. The interaction and intergenerational transmission of phytoplankton physiological markers and trace element absorption were explored to reflect the change in primary biomass and trace element sink. C. pyrenoidosa could produce a large number of reactive oxygen species stimulated by the concentration and exposure time of pollutants, which activated their antioxidant activity (superoxide dismutase (SOD) activity, β-carotene synthesis, antioxidant trace elements uptake) and peroxides production (hydroxyl radicals and malondialdehyde). The influence of the growth phase on SOD activity, copper absorption, and manganese adsorption in both persistent and accidental pollution was significant (p < 0.05, F > Fα). Adsorption of manganese and selenium positively connected with SOD, malondialdehyde, and Chlorophyl-a (p < 0.01). These findings convincingly indicate that petroleum hydrocarbon contamination can interfere with primary biomass and trace element sinks.

A new photoelectrochemical cell coupled with the Fenton reaction to remove pollutant and generate electricity under the drive of waste heat

The water and energy crises are becoming increasingly serious with rapid population and economic development. It is urgent to develop new wastewater treatment technologies with high efficiency and low energy consumption. Herein, a solar-salinity nexus cell (called PRC) integrated by a photocatalytic fuel cell and reverse electrodialysis was combined with the Fenton reaction. The PRC-Fenton process can extract electrons from organic wastewater driven by salinity gradient energy for power generation and wastewater remediation in two chambers. The Fenton cathode MOF(2Fe/Co)-GO/GF with good electrocatalytic and photocatalytic activity was developed and optimized in a three-electrode system. GO doping obviously enhanced the catalytic activity and stability of the Fenton cathode. The pollutant (ampicillin, AMP) was simultaneously removed in both anode and cathode chambers of the PRC-Fenton system. AMP removal by the MOF(2Fe/Co)-GO/GF cathode remained above 95% in a wide range of pH values (3.0-7.0). The output current of the PRC-Fenton process was 1.7-2.4 mA. Compared to similar systems, PRC-Fenton is suitable for treating toxic and refractory organic pollutants with green energy in two chambers and generating electricity.

Synergistic effect of nitrate on UV-chlorine photochemical degradation of carbamazepine

We investigated the use of UV-chlorine advanced oxidation process for the removal and transformation of carbamazepine (CBZ), and its photochemical synergy with NO₃^- for the production of ^.OH towards enhancing CBZ removal in aqueous solution. Production of ^.OH by UV-chlorine system with/without NO₃^- was studied under different conditions, by using salicylic acid (SA) as the chemical probe for ^.OH. Initial concentration of 30 mg/L SA, 5 and 10 mg/L chlorine, and 0-10 mg/L NO₃^- under irradiation at 254 nm (3.026 W/L) in a photochemical reactor was used. Aqueous solutions containing 10 mg/L chlorine and spiked with 4 mg/L NO₃^- gave the highest reproducible generation of ^.OH. Using initial concentrations of 10 mg/L CBZ and 10 mg/L chlorine, 60 % CBZ was removed after 10 min of irradiation without NO₃^-, while 72 % CBZ was removed with 4 mg/L NO₃^- added. There was no noticeable CBZ removal after 10 min of irradiation in the presence of NO₃^- without chlorine. Corresponding dark reactions were also conducted, with no noticeable degradation of CBZ. Samples were analyzed via UHPLC, LC-MS, and TOC (total organic carbon) analyzer for CBZ and TOC concentrations respectively. Although, there was significant reduction in CBZ concentration during both photochemical degradation processes, the was low TOC removal (~10%) in each case. The two photochemical degradation processes also seem to generate similar degradation products indicating that the addition NO₃^- of the UV-chlorine process might not have changed the degradation mechanism. The results indicate that NO₃^- could act synergistically in a UV-chlorine system to increase CBZ removal and reduce the quantity of free chlorine required to achieve a target removal efficiency. This could facilitate reduction in the potential production of chlorinated byproducts in the system.

Decontamination of 2-Chloroethyl ethyl sulfide on the surface by atmospheric pressure plasma jet

Atmospheric pressure plasma jet (APPJ) were used to decontaminate the surface's 2-Chloroethyl ethyl sulfide (2-CEES), a kind of sulfur mustard (HD) simulant. The power of the APPJ device didn't exceed 7.77 W. Helium APPJ was easier to generate plasma jet than argon APPJ. The treated nude mouse skin surface's temperature slowly reached 30.4 °C and no obvious lesions in the dermis and skin appendages after 15 min treatment. Compared with argon APPJ, the helium APPJ produced more ·OH and the maximum concentration of ·OH was 3.748 × 10^-9 mol/L. Attributed to the low density and more ·OH content, the helium APPJ had a better decontamination effect. With a maximum voltage of 7 kV and a helium flow rate of 4 L/min, 2-CEES (4.53 mg/cm²) can be completely decontaminated in 2.5 min, and no gaseous 2-CEES was detected. The detection of the 2-Hydroxyethyl ethyl sulfide proved the role of ·OH in the reaction system. During the reaction, 2-Chloroethyl ethyl sulfoxide and 2-Chloroethyl ethyl sulfone were also detected. The plasma jet could reduce the toxicity by destroying the parent molecule (2-CEES) in a short time, but it took more time to eliminate the intermediate products. No relevant intermediate products were detected in the gaseous, ensured the safety of personnel operating in open spaces.

Photo-Oxidation of Therapeutic Protein Formulations: From Radical Formation to Analytical Techniques

UV and ambient light-induced modifications and related degradation of therapeutic proteins are observed during manufacturing and storage. Therefore, to ensure product quality, protein formulations need to be analyzed with respect to photo-degradation processes and eventually protected from light exposure. This task usually demands the application and combination of various analytical methods. This review addresses analytical aspects of investigating photo-oxidation products and related mediators such as reactive oxygen species generated via UV and ambient light with well-established and novel techniques.

Efficient removal of antibiotic thiamphenicol by pulsed discharge plasma coupled with complex catalysis using graphene-WO3-Fe3O4 nanocomposites

Pulsed discharge plasma (PDP) induced complex catalysis for synergetic removal of thiamphenicol (TAP) was investigated using graphene-WO₃-Fe₃O₄ nanocomposites. The prepared samples were characterized systematically in view of the structure and morphology, chemical bonding state, optical property, electrochemical property and magnetic property. Based on characterization and TAP degradation, the catalytic performance followed: graphene-WO₃-Fe₃O₄>graphene-WO₃>WO₃, and the highest removal efficiency and kinetic constant could reached 99.3% and 0.070 min^-1, respectively. With increase of catalyst dosage, the removal efficiency firstly enhanced and then declined. Lower pH value was beneficial for TAP degradation. The prepared graphene-WO₃-Fe₃O₄ owed higher stability and lower dissolution rate of iron ion. The rGO-WO₃-Fe₃O₄ could decompose O₃ and H₂O₂ into more ·OH in PDP system. The degradation intermediates were characterized by fluorescence spectrograph, LC-MS and IC. Based on the detected intermediates and discrete Fourier transform (DFT) analysis, degradation pathway of TAP was proposed. Besides, the toxicity of intermediates was predicted. Finally, catalytic degradation mechanism of TAP by PDP with graphene-WO₃-Fe₃O₄ was summarized.

Multi-catalysis induced by pulsed discharge plasma coupled with graphene-Fe3O4 nanocomposites for efficient removal of ofloxacin in water: Mechanism, degradation pathway and potential toxicity

Herein, degradation of ofloxacin (OFX) by pulsed discharge plasma (PDP) coupled with multi-catalysis using graphene-Fe₃O₄ nanocomposites was inspected. The graphene-Fe₃O₄ nanocomposites were prepared by hydrothermal synthesis, and their morphology, specific surface area, chemical bond structure and magnetic property were characterized systematically. Compared with sole Fe₃O₄, the specific surface area of graphene-Fe₃O₄ nanocomposites increased from 26.34 m²/g to 125.04 m²/g. The prepared graphene-Fe₃O₄ nanocomposites had higher paramagnetism and the magnetic strength reached 66.05 emu/g, which was prone to separate from solution. Graphene-Fe₃O₄ nanocomposites could further accelerate OFX degradation compared to sole Fe₃O₄. When graphene content was 18 wt%, graphene-Fe₃O₄ nanocomposites exhibited the highest catalytic activity, and the removal efficiency of OFX enhanced from 65.0% (PDP alone) to 99.9%. 0.23 g/L dosage and acid solution were beneficial for OFX degradation. Higher stability of graphene-Fe₃O₄ nanocomposites could be maintained although four times use. Graphene-Fe₃O₄ nanocomposites could catalyze H₂O₂ and O₃ to produce more ·OH. The degradation products of OFX were identified by liquid chromatography mass spectrometry (LC-MS) and ion chromatography (IC). According to the identified products and discrete Fourier transform (DFT), the degradation pathway was inferred. Further toxicity assessment of products manifested that the toxicity of oral rat 50% lethal dose (LD₅₀) and the developmental toxicity of OFX were reduced.

UV-Vis quantification of hydroxyl radical concentration and dose using principal component analysis

Hydroxyl radicals (∙OH) are powerful oxidizing species formed naturally in the environment or artificially produced to destroy contaminants in water treatment facilities. Their short lifetime and high reactivity, however, present a significant challenge to quantifying their concentration in solution. Herein, we developed a novel method to accurately measure the steady-state ∙OH concentration and total ∙OH dose produced during the UV photolysis of hydrogen peroxide (H₂O₂) by monitoring the loss of salicylic acid (SA). This information can be acquired using only benchtop UV-Vis spectroscopy, thus expanding measurement capabilities of resource-limited laboratories by eliminating the need for sophisticated instrumentation. To improve the precision with which the rate of SA loss was measured compared to previous methods, we applied principal component analysis (PCA) to fit the UV-Vis spectra collected during SA exposure to ∙OH. For our experimental conditions consisting of 12 mL solutions composed of ≤ 100 mM H₂O₂ and 0.07 mM SA, the steady-state ∙OH concentration throughout the complete photolysis of H₂O₂ was 1.33 × 10^-11 M ± 1.14 × 10^-12 M. This represents more than a ten-fold improvement in reducing the uncertainty of the measurement, with respect to narrowing the 95 % confidence interval, compared to a previous method that employed matrix analysis to process the spectra. Furthermore, the variance of the measured ∙OH concentrations was reduced by a factor of 100 compared to previous methods. Using PCA, the limit-of-detection and limit-of-quantitation for ∙OH are 5.33 × 10^-13 M and 1.23 × 10^-12 M, respectively. By developing quantitative relationships among ∙OH concentration, H₂O₂ concentration, and UV exposure time, we also show how to calculate the equivalent exposure to ∙OH generated in natural aquatic environments by indirect photolysis. Finally, we use this methodology to demonstrate that the presence of suspended carbonaceous nanoparticles at concentrations as high as 300 ppm does not affect ∙OH concentration.

Plasma-catalytic degradation of ciprofloxacin in aqueous solution over different MnO2 nanocrystals in a dielectric barrier discharge system

The α-MnO₂, β-MnO₂ and γ-MnO₂ samples were prepared by the hydrothermal method and were used for the degradation of ciprofloxacin (CIP) wastewater in a combined DBD-catalytic process. The physical and chemical properties of the samples were systematically studied by several analytical techniques including BET, XRD, SEM, HRTEM, XPS, and H₂-TPR. The combination of DBD with α-MnO₂ showed the highest CIP degradation efficiency, and the efficiency could reach 93.1% after 50 min, which was 10.8% and 18.1% higher, respectively, than those of β-MnO₂ and γ-MnO₂ catalysts in the plasma-catalytic system. According to the model of response surface methodology, the contribution of key experimental parameters on the CIP degradation decreased in the order: peak voltage > air flow rate > initial concentration > initial pH. The optimum operating parameters were peak voltage 17 kV, air flow rate 2.5 L min^-1, an initial concentration 5 mg L^-1 and an initial pH 6.9. The quenching experiments of active species showed that OH and O₂^- were critical to the CIP degradation. The generated O₃ might be adsorbed by the α-MnO₂ catalyst and resulted in more OH generation. The intermediate products of CIP degradation in DBD+α-MnO₂ system were analyzed by LC-MS, and three possible degradation pathways were proposed. This research provides an insight into the use of the crystallographic structures in discharge plasma system for antibiotics in water.

Mineralization of salicylic acid via catalytic ozonation with Fe-Cu@SiO2 core-shell catalyst: A two-stage first order reaction

Mesoporous Fe-Cu@SiO₂ core-shell catalyst was synthesized and assessed for its catalytic activity in the ozonation of salicylic acid (SA). The synthesized catalyst was characterized by XRD, TEM, SEM, XPS, H₂-TPR, etc. Fe-Cu@SiO₂ exhibited a regular spherical shape and had the surface area at 1216 m² g^-1. The wrapping of metal components and their strong interaction prevented metal leaching. Fe-Cu@SiO₂ showed the highest activity for SA mineralization when compared with Fe@SiO₂ and Cu@SiO₂. In Fe-Cu@SiO₂/O₃, 88% TOC was removed, which was 2.5 times as much as that in sole ozonation. SA degradation efficiency in Fe-Cu@SiO₂/O₃ increased with initial pH. O₃, ·OH and H₂O₂ were the main reactive oxygen species accounting for SA mineralization. Due to their scavenging effect of ·OH, NH₄⁺, NO₃^- and humic acids would inhibit the degradation efficiency of Fe-Cu@SiO₂/O₃. Acidic sites, oxygen vacancies and the Fe-Cu(I/II) electron transfer were responsible for ozone decomposition and ·OH generation. SA mineralization proceeded through the ·OH mechanism. Moreover, SA mineralization in O₃ and Fe-Cu@SiO₂/O₃ both exhibited a two-stage pseudo first-order kinetics (stage I: 0-45 min; stage II: 45-120 min). The degradation intermediates were detected to investigate the reaction pathway. ORP and EEM were used to monitor the degradation process. Great difference was found for carboxylic acids accumulation in O₃ and Fe-Cu@SiO₂/O₃. The accelerated removal of oxalic acid and humic acid-like intermediates were responsible for the two-stage pseudo first-order kinetics.

Pulsed discharge plasma induced WO3 catalysis for synergetic degradation of ciprofloxacin in water: Synergetic mechanism and degradation pathway

Pulsed discharge plasma (PDP) was adopted to induce WO₃ for synergetic degradation of ciprofloxacin (CIP) in water. WO₃ was firstly characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), Photocurrents and Photoluminescence. The degradation results showed that PDP could induce WO₃ photocatalysis successfully, and a synergetic effect was established in PDP/WO₃ system. After 60 min treatment time, 0.16 g/L WO₃ increased the CIP removal from 71.3% to 99.6%, with the enhancement of the first-order kinetic constant from 0.020 min^-1 to 0.081 min^-1. Then, the effect of peak voltage, air flow rate and pH on CIP removal was evaluated. Active species trapping test verified that ·OH and ·O₂^- played the major role for plasma-degradation of CIP degradation, whereas OH and h⁺ were conductive to catalytic degrade CIP. WO₃ addition lead to the decline of O₃ and enhancement of OH no matter in deionized water or CIP solution. The degradation process was explored using fluorescence spectrograph, liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC). Finally, the possible degradation pathways of CIP degradation were proposed. The reuse test suggested WO₃ possessed excellent catalytic performance as well as good stability.

Degradation of antibiotic chloramphenicol in water by pulsed discharge plasma combined with TiO2/WO3 composites: mechanism and degradation pathway

Pulsed discharge plasma (PDP) combined with TiO₂/WO₃ composites for chloramphenicol (CAP) degradation was investigated. The prepared TiO₂/WO₃ composites were characterized by scanning electron microscope, transmission electron microscope, nitrogen adsorption apparatus, zeta sizer, X-ray diffraction, Raman spectra, UV-Vis absorption spectroscopy, X-ray photoelectron spectroscopy, photocurrent and electrochemical impedance spectroscopy. The degradation performance showed that the addition of TiO₂/WO₃ composites significantly enhanced the removal efficiency of CAP in PDP system. At a peak voltage of 18 kV, the highest removal efficiency of CAP could reach 88.1% in PDP system with 4 wt% TiO₂/WO₃, which was 36.8% and 26.0% higher than that in sole PDP system and PDP/TiO₂ system, respectively. The TiO₂/WO₃ composites significantly accelerated interfacial charge transfer process compared to the pure TiO₂. Besides, the effect of catalyst dosage and peak voltage on CAP removal was evaluated. OH, O₃O₂^-, h⁺ and high-energy electrons contributed to CAP degradation in PDP-TiO₂/WO₃ system. Addition of TiO₂/WO₃ composites can decompose O₃ and produce more OH and H₂O₂. The degradation intermediates were measured by liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC). The cycling degradation experiment showed that the TiO₂/WO₃ composites have good reusability as well as stability.

[A Method Based on Ru(bpy)3 3+ Electrogenerated Chemiluminescence for Assessment of Antioxidant Property of Naturally Occurring Antioxidants]

We developed a flow injection analysis (FIA) method based on tris(2,2'-bipyridine)ruthenium(III) [Ru(bpy)₃ ³⁺] electrogenerated chemiluminescence for assessment of antioxidant property. The hydroxyl radical (∙OH) were generated by H₂O photolysis using an ultraviolet/H₂O photoreactor. The reactor comprised a polytetrafluoroethylene tube, a quartz container, and a low-pressure mercury lamp that predominantly emitted radiation at around 185 nm. When the hydroxyl radical and Ru(bpy)₃ ³⁺ were in contact, chemiluminescence was generated as background emission. The background emission decreased when antioxidant samples were injected to the system. The antioxidant property of the naturally occurring antioxidants tested are listed herein, starting with the highest: gallic acid>ascorbic acid>quercetin. Moreover, our method allowed a sample throughput of approximately 100 samples/h. The proposed high throughput method can be used to assess the antioxidant property of the naturally occurring antioxidants.

Review of the methods for determination of reactive oxygen species and suggestion for their application in advanced oxidation induced by dielectric barrier discharges

Advanced oxidation processes (AOPs) particularly non-thermal plasmas based on electrical discharges have been widely investigated for water and wastewater treatment. Dielectric barrier discharges (DBDs) generate large amounts of selective and non-selective reactive oxygen species (ROS) such as ozone, hydrogen peroxide, atomic oxygen, superoxide molecular anions and hydroxyl radicals, having been proved to be efficient for water decontamination among various forms of electrical discharge systems. The detection and quantification methods of these oxygen species in non-thermal plasmas have been reviewed. However, their application in dielectric barrier discharge has not been well studied. It is therefore imperative to summarise the various detection and quantification methods for oxygen-based species determination in AOPs, aqueous systems and non-thermal plasma processes. Thereafter, reviewed methods are suggested for the determination of ROS in DBD configurations to understand the consumption trend of these oxidants during treatment of water effluents and to evaluate the performance of the treatment reactor configuration towards the degradation of targeted pollutants.

Development and Validation of an Ultra Performance Liquid Chromatography Method for the Determination of Dexketoprofen Trometamol, Salicylic Acid and Diclofenac Sodium

OBJECTIVES

A simple, fast, accurate and precise method has been developed for the determination of dexketoprofen trometamol (DKP), salicylic acid (SA) and diclofenac sodium (DIC) in the drug solutions using ultra high performance liquid chromatography (UPLC).

MATERIALS AND METHODS

UPLC method is highly reliable and sensitive method to quantify the amount of the active ingredient and the method is validated according to ICH guidelines.

RESULTS

The developed method is found to be precise, accurate, specific and selective. The method was also found to be linear and reproducible. The value of limit of dedection (LOD) of DKP, SA, DIC were found 0.00325 µg/mL, 0.0027 µg/mL and 0.0304 µg/mL, respectively. The limit of quantitation (LOQ) of DKP, SA and DIC were found 0.00985 µg/mL, 0.0081 µg/mL and 0.0920 µg/mL, respectively.

CONCLUSION

Proposed methods can be successfully applicable to the pharmaceutical preparation containing the above mentioned drugs (dexketoprofen trometamol, salicylic acid and diclofenac sodium). Even very small amounts of active substance can be analyzed and validations can be performed easily.

Synergistic Effect of Atmospheric-pressure Plasma and TiO2 Photocatalysis on Inactivation of Escherichia coli Cells in Aqueous Media

Atmospheric-pressure plasma and TiO2 photocatalysis have been widely investigated separately for the management and reduction of microorganisms in aqueous solutions. In this paper, the two methods were combined in order to achieve a more profound understanding of their interactions in disinfection of water contaminated by Escherichia coli. Under water discharges carried out by microplasma jet arrays can result in a rapid inactivation of E. coli cells. The inactivation efficiency is largely dependent on the feed gases used, the plasma treatment time, and the discharge power. Compared to atmospheric-pressure N2, He and air microplasma arrays, O2 microplasma had the highest activity against E. coli cells in aqueous solution, and showed >99.9% bacterial inactivation efficiency within 4 min. Addition of TiO2 photocatalytic film to the plasma discharge reactor significantly enhanced the inactivation efficiency of the O2 microplasma system, decreasing the time required to achieve 99.9% killing of E. coli cells to 1 min. This may be attributed to the enhancement of ROS generation due to high catalytic activity and stability of the TiO2 photocatalyst in the combined plasma-TiO2 systems. Present work demonstrated the synergistic effect of the two agents, which can be correlated in order to maximize treatment efficiency.

Carbon nanotube membranes to predict skin permeability of compounds

In the present study, carbon nanotube (CNT) membranes were prepared to predict skin penetration properties of compounds. A series of penetration experiments using Franz diffusion cells were performed with 16 different membrane compositions for model chemicals. Similar experiments were also carried out with same model molecules using five different commercially available synthetic membranes and human skins for the comparison. Model chemicals were selected as diclofenac, dexketoprofen and salicylic acid. Their permeability coefficients and flux values were calculated. Correlations between permeability values of model compounds for human skins and developed model membranes were investigated. Good correlations were obtained for CNT membrane, isopropyl myristate-treated CNT membrane (IM-CNT membrane) and bovine serum albumin-cholesterol, dipalmitoyl phosphatidyl choline-treated membrane (BSA-Cholesterol-DPPC-IM-CNT membrane). An artificial neural network (ANN) model was developed using some molecular properties and penetration coefficients from pristine CNT membranes to predict skin permeability values and quite good predictions were made.

Manganese Phosphate Self-assembled Nanoparticle Surface and Its application for Superoxide Anion Detection

Quantitative analysis of superoxide anion (O2(·-)) has increasing importance considering its potential damages to organism. Herein, a novel Mn-superoxide dismutase (MnSOD) mimics, silica-manganous phosphate (SiO2-Mn3(PO4)2) nanoparticles, were designed and synthesized by surface self-assembly processes that occur on the surface of silica-phytic acid (SiO2-PA) nanoparticles. The composite nanoparticles were characterized by fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electronic microscopy (SEM), electron diffraction pattern, energy dispersive spectroscopy (EDS) and elemental mapping. Then the electrochemical measurements of O2(·-) based on the incorporation of SiO2-Mn3(PO4)2 onto the surface of electrodes were performed, and some satisfactory results were obtained. This is the first report that manganous phosphate (Mn3(PO4)2) nanoparticles with shape-controlled, but not multilayer sheets, were utilized for O2(·-) detection. The surface self-assembly technology we proposed will offer the ideal material to construct more types biosensor and catalytic system for its nanosized effect.

Flavonoids as Potent Scavengers of Hydroxyl Radicals

Oxidative stress is a fundamental principle in the pathophysiology of many diseases. It occurs when the production of reactive oxygen species exceeds the capacity of the cell defense system. The hydroxyl radical is a reactive oxygen species that is commonly formed in vivo and can cause serious damage to biomolecules, such as lipids, proteins, and nucleic acids. It plays a role in inflammation-related diseases, like chronic inflammation, neurodegeneration, and cancer. To overcome excessive oxidative stress and thus to prevent or stop the progression of diseases connected to it, scientists try to combat oxidative stress and to find antioxidant molecules, including those that scavenge hydroxyl radical or diminish its production in inflamed tissues. This article reviews various methods of hydroxyl radical production and scavenging. Further, flavonoids, as natural plant antioxidants and essential component of the human diet, are reviewed as compounds interacting with the production of hydroxyl radicals. The relationship between hydroxyl radical scavenging and the structure of the flavonoids is discussed. The structural elements of the flavonoid molecule most important for hydroxyl radical scavenging are hydroxylation of ring B and a C2-C3 double bond connected with a C-3 hydroxyl group and a C-4 carbonyl group. Hydroxylation of ring A also enhances the activity, as does the presence of gallate and galactouronate moieties as substituents on the flavonoid skeleton.

Bimetal–organic-frameworks-derived yolk–shell-structured porous Co2P/ZnO@PC/CNTs hybrids for highly sensitive non-enzymatic detection of superoxide anion released from living cells

Bimetal-organic framework derived yolk–shell–structured porous Co₂P/ZnO@PC/CNTs were used as highly active electrocatalysts for electrochemical sensing of superoxide anions.

Targeted and ultrasound-triggered cancer cell injury using perfluorocarbon emulsion-loaded liposomes endowed with cancer cell-targeting and fusogenic capabilities

This study investigated the targeting and ultrasound-triggered injury of cancer cells using anticancer drug-free liposomes that contained an emulsion of perfluoropentane (ePFC5) and were co-modified with avidin as a targeting ligand for cancer cells and the hemagglutinating virus of Japan (HVJ) envelope to promote liposome fusion with the cells. These liposomes are designated as ePFC5-loaded avidin/HVJ liposomes. ePFC5-loaded liposomes were sensitized to ultrasound irradiation. Liposomes modified with avidin alone (avidin liposomes) showed binding to MCF-7 human breast cancer cells, and liposomes modified with HVJ envelope alone (HVJ liposomes) were found to fuse with MCF-7 cells. The irradiation of MCF-7 cells with 1 MHz ultrasound (30s, 1.2 W/cm(2), duty ratio 30%) combined with ePFC5-loaded avidin/HVJ liposomes resulted in a decrease in cell viability at 1h after irradiation to 43% of that of controls without ultrasound irradiation or liposomes. The cell viability was lower than that of cells treated with ultrasound irradiation with ePFC5-loaded avidin liposomes or ePFC5-loaded HVJ liposomes. This indicates that co-modification of liposome with avidin and HVJ envelope could enhance ultrasound-induced cell injury in the presence of ePFC5-loaded liposomes.

Norepinephrine-induced apoptotic and hypertrophic responses in H9c2 cardiac myoblasts are characterized by different repertoire of reactive oxygen species generation

Despite recent advances, the role of ROS in mediating hypertrophic and apoptotic responses in cardiac myocytes elicited by norepinephrine (NE) is rather poorly understood. We demonstrate through our experiments that H9c2 cardiac myoblasts treated with 2 µM NE (hypertrophic dose) generate DCFH-DA positive ROS only for 2 h; while those treated with 100 µM NE (apoptotic dose) sustains generation for 48 h, followed by apoptosis. Though the levels of DCFH fluorescence were comparable at early time points in the two treatment sets, its quenching by DPI, catalase and MnTmPyP suggested the existence of a different repertoire of ROS. Both doses of NE also induced moderate levels of H₂O₂ but with different kinetics. Sustained but intermittent generation of highly reactive species detectable by HPF was seen in both treatment sets but no peroxynitrite was generated in either conditions. Sustained generation of hydroxyl radicals with no appreciable differences were noticed in both treatment sets. Nevertheless, despite similar profile of ROS generation between the two conditions, extensive DNA damage as evident from the increase in 8-OH-dG content, formation of γ-H2AX and PARP cleavage was seen only in cells treated with the higher dose of NE. We therefore conclude that hypertrophic and apoptotic doses of NE generate distinct but comparable repertoire of ROS/RNS leading to two very distinct downstream responses.

●

H9c2 myoblasts upon treatment with 2 and 100 µM NE induces hypertrophy and apoptosis.

●

Both treatments show comparable levels of DCFH fluorescence with different kinetics.

●

Both treatments show comparable levels of HPF fluorescence in an oscillating manner.

●

More hydroxyl radical was generated in 100 µM NE treated set.

●

DNA damage and apoptosis occurs only in 100 µM NE treated sets.

Antiobesity, antioxidant and cytotoxicity activities of newly synthesized chalcone derivatives and their metal complexes

Four sets of rationally designed chalcones were prepared for evaluation of their antiobesity, antioxidant and cytotoxicity activities. These sets include nine oleoyl chalcones as mimics of oleoyl estrone, three monohydroxy chalcones (chalcone ligands), Schiff base-derived chalcones and four copper as well as zinc complexes. Oleoyl chalcones 4d, 4e and particularly 6a as an isosteric isomer of oleoyl estrone, were as active as Orlistat on weight loss and related metabolic parameters using male SD rats in vivo. Chalcone ligands 10a-c and Schiff base-derived chalcones 11 and 14a,b were weakly antioxidants, while, the copper and zinc complexes 15a-d were good antioxidants with zinc chelates 15b,d being more active than their copper analogues 15a,cin vitro. Compounds 10c and 14a showed good cytotoxicity activities as Doxorubicin against PC3 cancer cell line in vitro, while, the copper complex 15c showed promising activity with IC₅₀ value of 5.95 μM. The estimated IC₅₀ value for Doxorubicin was 8.7 μM. Chalcones 14a,b are bifunctional probes for potential investigations in cancer diagnosis and radiotherapy by complexation with Gd(3+) or metal radioisotopes followed by posttranslation of Shiga toxin B-subunits that target globotriosyl ceramide expressing cancer cells.

Formation of a salsolinol-like compound, the neurotoxin, 1-acetyl-6,7-dihydroxy-1,2,3,4-tetrahydroisoquinoline, in a cellular model of hyperglycemia and a rat model of diabetes

There are statistical data indicating that diabetes is a risk factor for Parkinson's disease (PD). Methylglyoxal (MG), a biologically reactive byproduct of glucose metabolism, the levels of which have been shown to be increase in diabetes, reacts with dopamine to form 1-acetyl-6,7-dihydroxy-1,2,3,4-tetrahydroisoquinoline (ADTIQ); this formation may provide further insight into the connection between PD and diabetes. In this study, we investigated the role of ADTIQ in these two diseases to determine in an aim to enhance our understanding of the link between PD and diabetes. To this end, a cell model of hyperglycemia and a rat model of diabetes were established. In the cell model of hyperglycemia, compared with the control group, the elevated glucose levels promoted free hydroxyl radical formation (p<0.01). An ADTIQ assay was successfully developed and ADTIQ levels were detected and quantified. The levels of its precursors, MG and dopamine (DA), were determined in both the cell model of hyperglycemia and the rat model of diabetes. The proteins related to glucose metabolism were also assayed. Compared with the control group, ADTIQ and MG levels were significantly elevated not only in the cell model of hyperglycemia, but also in the brains of rats with diabetes (p<0.01). Seven key enzymes from the glycolytic pathway were found to be significantly more abundant in the brains of rats with diabetes. Moreover, it was found that adenosine triphosphate (ATP) synthase and superoxide dismutase (SOD) expression levels were markedly decreased in the rats with diabetes compared with the control group. Therefore, ADTIQ expression levels were found to be elevated under hyperglycemic conditions. The results reported herein demonstrate that ADTIQ, which is derived from MG, the levels of which are increased in diabetes, may serve as a neurotoxin to dopaminergic neurons, eventually leading to PD.

Sonocatalytic-Fenton reaction for enhanced OH radical generation and its application to lignin degradation

The present study demonstrated that the combined use of the sonocatalytic reaction (using ultrasound and titanium dioxide) and the Fenton reaction exhibited synergistically enhanced hydroxyl (OH) radical generation. Dihydroxybenzoic acid (DHBA) concentration as index of OH radical generation was 13 and 115 μM at 10 min in the sonocatalytic reaction and Fenton reaction, respectively. On the other hand, the DHBA concentration was 378 μM at 10 min in the sonocatalytic-Fenton reaction. The sonocatalytic-Fenton reaction was used for degradation of lignin. The lignin degradation ratio was 1.8%, 49.9%, and 60.0% at 180 min in the sonocatalytic reaction, Fenton reaction, and sonocatalytic-Fenton reaction, respectively. Moreover, the sonocatalytic-Fenton reaction was applied to pretreatment of lignocellulosic biomass to enhance subsequent enzymatic saccharification. The cellulose saccharification ratio was 11%, 14%, 16% and 25% at 360 min of pretreatment by control reaction, the sonocatalytic reaction, Fenton reaction, and sonocatalytic-Fenton reaction, respectively.

Photocatalytic oxidation of monuron in the suspension of WO3 under the irradiation of UV-visible light

A comprehensive study of the degradation of monuron, one of the phenylurea herbicides, was conducted by UV-Vis/WO(3) process. It was found that hydroxyl radicals played a major role in the decay of monuron while other radicals (e.g. superoxide) and hole might also contribute to the decomposition of monuron. The oxidation path likely plays a major role in the generation of hydroxyl radicals. The effects of initial pH level, initial concentration of monuron, and inorganic oxidants on the performance of UV-Vis/WO(3) process were also investigated and optimized. Comparison between monuron decay pathways by UV-Vis/WO(3) and UV/TiO(2) was conducted. The decay mechanisms, including N-terminus demethylation, dechlorination and direct hydroxylation on benzene ring, were observed to be involved in the oxidation of monuron in these two processes. Sixteen intermediates were identified during the photodegradation of monuron and degradation pathways were proposed accordingly.

Study on Synthesis and Characterization of a Fluorescence Probe and its Application for Determination of Superoxide Anion Radical

A novel Schiff base, 2-(Salicylideneamino)pyridine (2-SAP) synthesized by 2-aminopyridine and salicylaldehyde was used as a fluorescence probe to determine superoxide anion radical (O2•-) in this study. The synthetic product was characterized by IR, 1H-NMR and GC-MS methods. A fluorescence quenching reaction occurs between 2-SAP and O2•-, and the fluorescence intensity decreased significantly. The effect of pyrogallol concentration (2.0×10-5 M to1.0×10-3 M) was discussed in this study. In the range from 2.0×10-5 M to 1.0×10-4 M, relative fluorescence intensity (y) and pyrogallol concentration (x) shown a good linear relationship, y=37.801x+76.854, r=0.993. Based on this phenomenon, the O2•- generated by pyrogallol autoxidation could be determined simply with high sensitivity.

Ultrasound-induced membrane lipid peroxidation and cell damage of Escherichia coli in the presence of non-woven TiO2 fabrics

A non-woven titanium dioxide (TiO(2)) fabric was applied to disinfection by ultrasound (US) irradiation, and the disinfection efficiency and lipid peroxidation of Escherichia coli (E. coli) cell membrane were evaluated to investigate the killing process. The addition of non-woven TiO(2) fabric enhanced hydroxyl (OH) radical generation and disinfection efficiency. Judging from the disinfection experiments using glutathione or t-butanol as a radical scavenger, the OH radical played a major role in cell killing in sonodynamic disinfection with non-woven TiO(2) fabric. Moreover, to understand the detailed killing process, damage to cell membrane was also evaluated using a diphenyl-1-pyrenylphosphine (DPPP) fluorescent probe, which detects the membrane's lipid peroxidation. The addition of non-woven TiO(2) fabric aggravated this peroxidation. This aggravation was caused by the OH radical according to an assay using a radical scavenger. From these results, it was concluded that non-woven TiO(2) fabric as a sonocatalyst promoted peroxidation of the polyunsaturated phospholipid component of the lipid membrane initially and induced a major disorder in the E. coli cell membrane under US irradiation.