Strategies for the control of catheter encrustation

Identification of mechanisms modulating chlorhexidine and octenidine susceptibility in Proteus mirabilis

AIMS

We aimed to identify mechanisms underlying the tolerance of Proteus mirabilis-a common cause of catheter associated urinary tract infection-to the clinically used biocides chlorhexidine (CHD) and octenidine (OCT).

METHODS AND RESULTS

We adapted three clinical isolates to grow at concentrations of 512 µg ml-1 CHD and 128 µg ml-1 OCT. Genetic characterization and complementation studies revealed mutations inactivating the smvR repressor and increasing smvA efflux expression were associated with adaptation to both biocides. Mutations in mipA (encoding the MltA interacting protein) were less prevalent than smvR mutations and only identified in CHD adapted populations. Mutations in the rppA response regulator were exclusive to one adapted isolate and were linked with reduced polymyxin B susceptibility and a predicted gain of function after biocide adaptation. Biocide adaptation had no impact on crystalline biofilm formation.

CONCLUSIONS

SmvR inactivation is a key mechanism in both CHD and OCT tolerance. MipA inactivation alone confers moderate protection against CHD, and rppA showed no direct role in either CHD or OCT susceptibility.

Recent Advances in Antimicrobial Coatings and Material Modification Strategies for Preventing Urinary Catheter-Associated Complications

In recent years, we have witnessed prominent improvements in urinary catheter coatings to tackle the commonly occurring catheter-associated urinary tract infection (CAUTI) in catheterized patients. CAUTIs are claimed to be one of the most frequent nosocomial infections that can lead to various complications, from catheter encrustation to severe septicaemia and pyelonephritis. Besides general prevention hygienic strategies, antimicrobial-coated urinary catheters show great potential in the prevention of urinary catheter-associated complications. The aim of this review is to present and evaluate recent updates on the development of antimicrobial urinary catheters in the context of the aetiology of urinary malfunction. Subsequently, we shed some light on future perspectives of utilizing 3D printing and the surrounding regulatory directions.

Guidelines for Infection Control in the Urological Field, including Urinary Tract Management (revised second edition)

The Committee for the Development of Guidelines for Infection Control in the Urological Field, including Urinary Tract Management of the Japanese Urological Association, together with its systematic review team and external reviewers, have prepared a set of practice guidelines, an abridged version of which is published herein. These guidelines cover the following topics: (i) foundations of infection control, standard precautions, route-specific precautions, and occupational infection control (including vaccines); (ii) the relationship between urologists and infection control; (iii) infection control in urological wards and outpatient clinics; (iv) response to hepatitis B virus reactivation; (v) infection control in urological procedures and examinations; (vi) prevention of infections occurring in conjunction with medical procedures and examinations; (vii) responses to urinary tract tuberculosis and bacillus Calmette-Guérin; (viii) aseptic handling, cleaning, disinfection, and sterilization of urinary tract endoscopes (principles of endoscope manipulation, endoscope lumen cleaning, and disinfection); (ix) infection control in the operating room (principles of hand washing, preoperative rubbing methods, etc.); (x) prevention of needlestick and blood/bodily fluid exposure and response to accidental exposure; (xi) urinary catheter-associated urinary tract infection and purple urinary bag syndrome; and (xii) urinary catheter-associated urinary tract infections in conjunction with home care. In addressing these topics, the relevant medical literature was searched to the extent possible, and content was prepared for the purpose of providing useful information for clinical practice.

Antibacterial Effects of Bimetallic Clusters Incorporated in Amorphous Carbon for Stent Application

The purpose of this work is the development of Ag/a:C and Ag-Au/a:C coatings for ureteral stents, to provide them with antimicrobial characteristics. Silver was selected because of its well-known antibacterial properties, while gold was included to assess its capacity to accelerate the silver ion release forming a galvanic couple between Au and Ag. Thus, the metallic (Ag) and bimetallic clusters (Ag-Au) were produced by three different configurations: (i) unbalanced magnetron sputtering (conventional sputtering), (ii) plasma gas condensation process, and by (iii) a combination between both previous approaches. Coatings with Ag-Au bimetallic clusters were characterized by transmission electron microscopy (TEM) in order to study the arrangement (alloy, core-shell, and galvanic couple) of these particles in the carbon matrix. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to quantify the Ag ions released through artificial urine from the different coatings deposited on thermoplastic polyurethane tape (one of the materials used in the manufacture of the ureteral stent ). Then, the antibacterial and cytotoxicity properties of Ag and Ag-Au/a:C coatings were evaluated. TEM shows that a biphasic structure was not detected, thus not allowing to anticipate the establishment of a galvanic couple. The ICP-OES results demonstrate that the silver ionization is mainly a function of the amount of silver incorporated in the amorphous carbon (a:C) matrix, and the formation of a bimetallic alloy has a detrimental effect on release of the silver ions. The antibacterial activity was regulated by the silver ionization mechanisms because the coatings with higher Ag release had a higher antibacterial activity.

Urinary Catheter Coating Modifications: The Race against Catheter-Associated Infections

Urinary catheters are common medical devices, whose main function is to drain the bladder. Although they improve patients’ quality of life, catheter placement predisposes the patient to develop a catheter-associated urinary tract infection (CAUTI). The catheter is used by pathogens as a platform for colonization and biofilm formation, leading to bacteriuria and increasing the risk of developing secondary bloodstream infections. In an effort to prevent microbial colonization, several catheter modifications have been made ranging from introduction of antimicrobial compounds to antifouling coatings. In this review, we discuss the effectiveness of different coatings in preventing catheter colonization in vitro and in vivo, the challenges in fighting CAUTIs, and novel approaches targeting host–catheter–microbe interactions.

Pathogen displacement during intermittent catheter insertion: a novel in vitro urethra model

AIM

To develop a novel in vitro urethra model and use it to determine if insertion of an intermittent urinary catheter (IC) displaces pathogenic bacteria from the urethral meatus along the urethra.

METHODS

Displacement of microbial growth after catheter insertion was assessed using a novel in vitro urethra model. The in vitro urethra model utilized chromogenic agar and was inoculated with bacteria at one side of the artificial urethra channel, to act as a contaminated urethral meatus, before an IC was inserted into the channel. Three ICs types were used to validate the in vitro urethra model and methodology.

RESULTS

When compared to the bacterial growth control, a significant difference in bacterial growth was found after insertion of the uncoated (P ≤ 0·001) and hydrophilic coated (P ≤ 0·009) catheters; no significant difference when a prototype catheter was inserted into the in vitro urethra model with either bacterial species tested (P ≥ 0·423).

CONCLUSION

The results presented support the hypothesis that a single catheter insertion can initiate a catheter-associated urinary tract infection.

SIGNIFICANCE AND IMPACT OF THE STUDY

The in vitro urethra model and associated methodology were found to be reliable and reproducible (P ≥ 0·265) providing new research tool for the development and validation of emerging technologies in urological healthcare.

Bacterial biofilm formation on indwelling urethral catheters

Urethral catheters are the most commonly deployed medical devices and used to manage a wide range of conditions in both hospital and community care settings. The use of long-term catheterization, where the catheter remains in place for a period >28 days remains common, and the care of these patients is often undermined by the acquisition of infections and formation of biofilms on catheter surfaces. Particular problems arise from colonization with urease-producing species such as Proteus mirabilis, which form unusual crystalline biofilms that encrust catheter surfaces and block urine flow. Encrustation and blockage often lead to a range of serious clinical complications and emergency hospital referrals in long-term catheterized patients. Here we review current understanding of bacterial biofilm formation on urethral catheters, with a focus on crystalline biofilm formation by P. mirabilis, as well as approaches that may be used to control biofilm formation on these devices. SIGNIFICANCE AND IMPACT OF THE STUDY: Urinary catheters are the most commonly used medical devices in many healthcare systems, but their use predisposes to infection and provide ideal conditions for bacterial biofilm formation. Patients managed by long-term urethral catheterization are particularly vulnerable to biofilm-related infections, with crystalline biofilm formation by urease producing species frequently leading to catheter blockage and other serious clinical complications. This review considers current knowledge regarding biofilm formation on urethral catheters, and possible strategies for their control.

Review of Catheter-Associated Urinary Tract Infections and In Vitro Urinary Tract Models

Catheter-associated urinary tract infections (CAUTIs) are one of the most common nosocomial infections and can lead to numerous medical complications from the mild catheter encrustation and bladder stones to the severe septicaemia, endotoxic shock, and pyelonephritis. Catheters are one of the most commonly used medical devices in the world and can be characterised as either indwelling (ID) or intermittent catheters (IC). The primary challenges in the use of IDs are biofilm formation and encrustation. ICs are increasingly seen as a solution to the complications caused by IDs as ICs pose no risk of biofilm formation due to their short time in the body and a lower risk of bladder stone formation. Research on IDs has focused on the use of antimicrobial and antibiofilm compounds, while research on ICs has focused on preventing bacteria entering the urinary tract or coming into contact with the catheter. There is an urgent need for in vitro urinary tract models to facilitate faster research and development for CAUTI prevention. There are currently three urinary tract models that test IDs; however, there is only a single very limited model for testing ICs. There is currently no standardised urinary tract model to test the efficacies of ICs.

Ureteral stents in urolithiasis

Ever since the ureteral stent design was fitted with a curl on both sides to prevent it from migrating up or down the ureter some 40 years ago, its use has gained tremendous momentum, aiding in the rise and evolution of endourology and has confidently kept its place in modern time urology. Over the past four decades, several designs, coating and biomaterials have been developed, trying to reduce infection, encrustation and other stent related symptoms. As the ideal stent has not yet been discovered, different ways of helping patients with their complaints have been researched. This review will cover these aspects of stent use in urolithiasis.

Evaluation of a ureteral catheter coating by means of a BioEncrustation in vitro model

Biomaterials for applications in the urinary tract are challenged with both biofilm formation and encrustation, two highly interconnected processes. While great effort has been achieved developing promising materials there is only a limited choice of sophisticated in vitro models that are available to analyse the performance of biomaterials prior to performing delicate and expensive in vivo studies. In this study we present a complex BioEncrustation model that imitates both the processes of multi-species biofilm formation and encrustation in vitro. The resulting crystalline biofilms are compared to the deposits found on explanted ureteral stent surfaces (in vivo situation) and to deposits formed in an experimental set up that does not contain bacteria (Encrustator®). Further focus of this study is dedicated to employing the developed BioEncrustation model to evaluate the effect multifunctional coatings impose on the processes of biofilm formation and encrustation under in vitro conditions. The investigated TANP coating combines unspecific and broad band specific antibacterial properties with a degrading polymer matrix that is intended to inhibit crystal formation. The coating was prepared on both polyurethane and silicone tubes and the subsequent results of the in vitro BioEncrustation analyses reveal a promising potential for employing the coating to render ureteral stent surfaces more biocompatible.

Advances in Ureteral Stent Design and Materials

Purpose of Review

There are three technological parameters that play a key role on the performance of an ideal stent. These are its material, design and surface coating. This article highlights some fundamental developments that took place in these three areas of stent’s technology, in order to contribute to the identification of an ideal stent.

Recent Findings

In addition to technological developments concerning stent’s material, design and surface coating, the flow dynamic performance of stents has recently attracted increasing attention. Notably, it has been postulated that the local flow field in a stent is correlated with the deposition of crystals and microorganisms. These findings could potentially revolutionise future stent’s designs, and complement developments made on materials and coatings.

Summary

The most relevant changes in materials, designs and surface coatings of ureteric stents are reviewed in this article. These are described in the context of a specific cause of stent’s failure they aim to address, with a particular focus on encrustation and biofilm formation.

A review of the recent advances in antimicrobial coatings for urinary catheters

More than 75% of hospital-acquired or nosocomial urinary tract infections are initiated by urinary catheters, which are used during the treatment of 15-25% of hospitalized patients. Among other purposes, urinary catheters are primarily used for draining urine after surgeries and for urinary incontinence. During catheter-associated urinary tract infections, bacteria travel up to the bladder and cause infection. A major cause of catheter-associated urinary tract infection is attributed to the use of non-ideal materials in the fabrication of urinary catheters. Such materials allow for the colonization of microorganisms, leading to bacteriuria and infection, depending on the severity of symptoms. The ideal urinary catheter is made out of materials that are biocompatible, antimicrobial, and antifouling. Although an abundance of research has been conducted over the last forty-five years on the subject, the ideal biomaterial, especially for long-term catheterization of more than a month, has yet to be developed. The aim of this review is to highlight the recent advances (over the past 10years) in developing antimicrobial materials for urinary catheters and to outline future requirements and prospects that guide catheter materials selection and design.

STATEMENT OF SIGNIFICANCE

This review article intends to provide an expansive insight into the various antimicrobial agents currently being researched for urinary catheter coatings. According to CDC, approximately 75% of urinary tract infections are caused by urinary catheters and 15-25% of hospitalized patients undergo catheterization. In addition to these alarming statistics, the increasing cost and health related complications associated with catheter associated UTIs make the research for antimicrobial urinary catheter coatings even more pertinent. This review provides a comprehensive summary of the history, the latest progress in development of the coatings and a brief conjecture on what the future entails for each of the antimicrobial agents discussed.

Clinical complications of urinary catheters caused by crystalline biofilms: something needs to be done

This review is largely based on a previous paper published in the journal Spinal Cord. The care of many patients undergoing long-term bladder catheterization is complicated by encrustation and blockage of their Foley catheters. This problem stems from infection by urease-producing bacteria, particularly Proteus mirabilis. These organisms colonize the catheter forming an extensive biofilm; they also generate ammonia from urea, thus elevating the pH of urine. As the pH rises, crystals of calcium and magnesium phosphates precipitate in the urine and in the catheter biofilm. The continued development of this crystalline biofilm blocks the flow of urine through the catheter. Urine then either leaks along the outside of the catheter and the patient becomes incontinent or is retained causing painful distension of the bladder and reflux of urine to the kidneys. The process of crystal deposition can also initiate stone formation. Most patients suffering from recurrent catheter encrustation develop bladder stones. P. mirabilis establishes stable residence in these stones and is extremely difficult to eliminate from the catheterized urinary tract by antibiotic therapy. If blocked catheters are not identified and changed, serious symptomatic episodes of pyelonephritis, septicaemia and endotoxic shock can result. All types of Foley catheters including silver- or nitrofurazone-coated devices are vulnerable to this problem. In this review, the ways in which biofilm formation on Foley catheters is initiated by P. mirabilis will be described. The implications of understanding these mechanisms for the development of an encrustation-resistant catheter will be discussed. Finally, the way forward for the prevention and control of this problem will be considered.

Building an antifouling zwitterionic coating on urinary catheters using an enzymatically triggered bottom-up approach

Catheter associated urinary tract infections are common during hospitalization due to the formation of bacterial biofilms on the indwelling device. In this study, we report an innovative biotechnology-based approach for the covalent functionalization of silicone catheters with antifouling zwitterionic moieties to prevent biofilm formation. Our approach combines the potential bioactivity of a natural phenolics layer biocatalytically conjugated to sulfobetaine-acrylic residues in an enzymatically initiated surface radical polymerization with laccase. To ensure sufficient coating stability in urine, the silicone catheter is plasma-activated. In contrast to industrial chemical methods, the methacrylate-containing zwitterionic monomers are polymerized at pH 5 and 50 °C using as an initiator the phenoxy radicals solely generated by laccase on the phenolics-coated catheter surface. The coated catheters are characterized by X-ray photoelectron spectroscopy (XPS), Fourier transformed infrared (FTIR) analysis, atomic force microscopy (AFM), and colorimetrically. Contact angle and protein adsorption measurements, coupled with in vitro tests with the Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus in static and dynamic conditions, mimicking the operational conditions to be faced by the catheters, demonstrate reduced biofilm formation by about 80% when compared to that of unmodified urinary catheters. The zwitterionic coating did not affect the viability of the human fibroblasts (BJ-5ta) over seven days, corresponding to the extended useful life of urinary catheters.

New developments in ureteral stent design, materials and coatings

Ureteral stents are used in a variety of urological diseases and procedures. The majority of patients with indwelling ureteral stents experience bothersome symptoms and are at increased risk for urinary tract infection. Stent encrustation and the associated complications can also result in significant patient morbidity. The development of new stent designs using novel biomaterials, stent coatings and drug-eluting technologies are being applied to reduce the disadvantageous features of ureteral stents.

Diagnosis, prevention, and treatment of catheter-associated urinary tract infection in adults: 2009 International Clinical Practice Guidelines from the Infectious Diseases Society of America

Guidelines for the diagnosis, prevention, and management of persons with catheter-associated urinary tract infection (CA-UTI), both symptomatic and asymptomatic, were prepared by an Expert Panel of the Infectious Diseases Society of America. The evidence-based guidelines encompass diagnostic criteria, strategies to reduce the risk of CA-UTIs, strategies that have not been found to reduce the incidence of urinary infections, and management strategies for patients with catheter-associated asymptomatic bacteriuria or symptomatic urinary tract infection. These guidelines are intended for use by physicians in all medical specialties who perform direct patient care, with an emphasis on the care of patients in hospitals and long-term care facilities.

European and Asian guidelines on management and prevention of catheter-associated urinary tract infections

We surveyed the extensive literature regarding the development, therapy and prevention of catheter-associated urinary tract infections (UTIs). We systematically searched for meta-analyses of randomised controlled trials available in Medline giving preference to the Cochrane Central Register of Controlled Trials and also considered other relevant publications, rating them on the basis of their quality. The studies' recommendations, rated according to a modification of the US Department of Health and Human Services (1992), give a close-to-evidence-based guideline for all medical disciplines, with special emphasis on urology where catheter care is an important issue. The survey found that the urinary tract is the commonest source of nosocomial infection, particularly when the bladder is catheterised (IIa). Most catheter-associated UTIs are derived from the patient's own colonic flora (IIb) and the catheter predisposes to UTI in several ways. The most important risk factor for the development of catheter-associated bacteriuria is the duration of catheterisation (IIa). Most episodes of short-term catheter-associated bacteriuria are asymptomatic and are caused by a single organism (IIa). Further organisms tend to be acquired by patients catheterised for more than 30 days. The clinician should be aware of two priorities: the catheter system should remain closed and the duration of catheterisation should be minimal (A). While the catheter is in place, systemic antimicrobial treatment of asymptomatic catheter-associated bacteriuria is not recommended (A), except for some special cases. Routine urine culture in an asymptomatic catheterised patient is also not recommended (C) because treatment is in general not necessary. Antibiotic treatment is recommended only for symptomatic infection (B). Long-term antibiotic suppressive therapy is not effective (A). Antibiotic irrigation of the catheter and bladder is of no advantage (A). Routine urine cultures are not recommended if the catheter is draining properly (C). A minority of patients can be managed with the use of the non-return (flip) valve catheter, avoiding the closed drainage bag. Such patients may exchange the convenience of on-demand drainage with an increased risk of infection. Patients with urethral catheters in place for 10 years or more should be screened annually for bladder cancer (C). Clinicians should always consider alternatives to indwelling urethral catheters that are less prone to causing symptomatic infection. In appropriate patients, suprapubic catheters, condom drainage systems and intermittent catheterisation are each preferable to indwelling urethral catheterisation (B).

Strategies for the development of the urinary catheter

Indwelling urinary catheters are utilized in the management of a wide range of conditions both in an acute and a chronic setting. However, utilization of this type of device is associated with a number of issues, including an increased propensity to develop bacteriuria, symptomatic infection and also encrusted deposits on the device. The development of novel biomaterials, incorporation of therapeutic agents and other strategies to minimize the issues associated with these devices are discussed in this review.

Technology insight: Novel ureteral stent materials and designs

Ureteral stents are an important tool for aiding upper urinary tract drainage, but can cause significant patient morbidity. Common problems include stent-induced pain, hematuria, dysuria, infection, and encrustation. From a urologist's perspective, stents must be easy to maneuver in the urinary tract, radiopaque, and affordable. Since the development of the modern day stent in 1978, stents have evolved to include softer biomaterials that are more resistant to encrustation and infection. An ideal biomaterial is one that is not affected by its environment and does not elicit reactive changes in surrounding tissues. To date, the ideal biomaterial or stent does not exist. This review discusses developments that address the issues of infection, biofilm formation, encrustation, and patient comfort. Stent materials including polyurethane, silicone, biodegradable substances and new combination polymers are reviewed, in addition to novel stent coatings such as heparin, hydrogel, and silver nitrate. Ureteral stent technologies currently lag behind vascular stents, particularly drug-eluting stents, but new developments will continue to improve these essential urological tools.

Factors modulating the pH at which calcium and magnesium phosphates precipitate from human urine

The factors controlling the rate at which crystalline bacterial biofilms develop on indwelling bladder catheters are poorly understood. It is known that normally the pH of voided urine (pHv) is lower than the pH at which calcium and magnesium phosphates come out of urine solution (pHn). In patients who develop infections with urease producing bacteria, however, the pHv rises above the pHn and precipitation of the phosphates occurs in the urine and the biofilm. The aim of this study was to examine ways of manipulating the pHn of urine so that more of its calcium and magnesium remain in solution under alkaline conditions. The experimental data show that pHn can be elevated by decreasing the calcium, magnesium and phosphate concentrations. Increasing the fluid intake of a human subject so that the urinary calcium fell from 120 mg/l to 25 mg/l, for example, resulted in the pHn increasing from 6.48 to 8.22. The addition of citrate to urine also produced a rise in the pHn. The daily consumption of 500 ml of fresh orange juice increased urinary citrate concentrations from 0.35 to around 1.21 mg/ml and the pHn rose from 7.24 to 8.2. The pHn of urine is thus a highly variable parameter. It can be manipulated by controlling the urinary concentrations of magnesium, calcium, phosphate and citrate ions. We suggest that increasing fluid intake with citrate containing drinks would reduce the extent of encrustation on catheters in patients infected with urease producing bacteria.

Swarmer cell differentiation in Proteus mirabilis

Under the appropriate environmental conditions, the gram-negative bacterium Proteus mirabilis undergoes a remarkable differentiation to form a distinct cell type called a swarmer cell. The swarmer cell is characterized by a 20- to 40-fold increase in both cell length and the number of flagella per cell. Environmental conditions required for swarmer cell differentiation include: surface contact, inhibition of flagellar rotation, a sufficient cell density and cell-to-cell signalling. The differentiated swarmer cell is then able to carry out a highly ordered population migration termed swarming. Genetic analysis of the swarming process has revealed that a large variety of distinct loci are required for this differentiation including: genes involved in regulation, lipopolysaccharide and peptidoglycan synthesis, cell division, ATP production, putrescine biosynthesis, proteolysis and cell shape determination. The process of swarming is important medically because the expression of virulence genes and the ability to invade cells are coupled to the differentiated swarmer cell. In this review, the genetic and environmental requirements for swarmer cell differentiation will be outlined. In addition, the role of the differentiated swarmer cell in virulence and its possible role in biofilm formation will be discussed.

Infection control issues in central venous catheter care

Central venous catheters (CVCs) are now a routine part of patient management in the intensive care unit (ICU). Over time, a vast amount of literature associated with the use and care of CVCs has accumulated. The purpose of this article is to discuss the literature associated with the care of these devices in a narrative format. Although particular attention is paid to infection control issues, other fundamental areas such as catheter design, dressings, line changing and post insertion management are also discussed. The article goes on to look at the future of CVC design and concludes with an analysis of future developments related to CVCs.

Encrustation of biomaterials in the urinary tract

This review considers the problem of the encrustation of biomaterials used for urinary prostheses. After a general discussion of the problem it deals with exciting new developments which may prove to be clinically applicable in preventing this costly and resource consuming complication. The widespread use of use of in vitro models which accurately simulate the conditions found in the human urinary tract will allow appropriate preliminary studies. Perhaps then clinical evaluation will be warranted.

URINARY TRACT BIOMATERIALS

PURPOSE

As a result of endourological advances, biomaterials have become increasingly used within the urinary tract. This review article provides an update on the current status of urinary tract biomaterials, discussing issues of biocompatibility, biomaterials available for use, clinical applications and biomaterial related complications. Perspectives on future materials for use in the urinary tract are also provided.

MATERIALS AND METHODS

We performed a comprehensive search of the peer reviewed literature on all aspects of biomaterials in the urinary tract using PubMed and MEDLINE. All pertinent articles were reviewed in detail.

RESULTS

Any potential biomaterial must undergo rigorous physical and biocompatibility testing prior to its commercialization and use in humans. There are currently many different bulk materials and coatings available for the manufacturing of biomaterials, although the ideal material has yet to be discovered. For use in the urinary tract, biomaterials may be formed into devices, including ureteral and urethral stents, urethral catheters and percutaneous nephrostomy tubes. Despite significant advances in basic science research involving biocompatibility issues and biofilm formation, infection and encrustation remain associated with the use of biomaterials in the urinary tract and, therefore, limit their long-term indwelling time.

CONCLUSIONS

Prosthetic devices formed from biomaterials will continue to be an essential tool in the practicing urologist's armamentarium. Ongoing research is essential to optimize biocompatibility and decrease biomaterial related complications such as infection and encrustation within the urinary tract. Future advances include biodegradables, novel coatings and tissue engineering.

Histologic Evaluation of the Tissue Seal and Biologic Response Around Cochlear Implant Electrodes in the Human

HYPOTHESIS

Histopathologic study of the tissue seal and biologic response around cochlear implant electrodes in patients who had received a cochlear implant during life could provide clues concerning the pathogenesis of meningitis after cochlear implantation.

BACKGROUND

Bacterial meningitis has been reported as an infrequent complication of cochlear implantation using a variety of electrode designs. The cause of meningitis in cochlear implant recipients has not been firmly established. In an analogous surgical situation, namely stapedectomy, delayed meningitis could occur as a complication of ipsilateral acute suppurative otitis media in which there was open communication between the middle ear and perilymph.

METHODS

Twenty-one temporal bones from 20 individuals who had undergone cochlear implantation during life were studied by light microscopy. All sections passing through the cochleostomy site and electrode track were examined to evaluate the tissue seal at the cochleostomy, the presence or absence of an extracochlear electrode sheath, and finally, to seek evidence of a cellular inflammatory response near the electrode. These data were compared with clinical data, including electrode system used, the number of years between implantation and death, type of tissue used at surgery, and the age and sex of the patients.

RESULTS

The 21 specimens included cases implanted with the Symbion Ineraid, Cochlear Corporation Nucleus 22-channel, Cochlear Corporation Nucleus 24-channel, a Cochlear Corporation Nucleus single channel, and Advanced Bionics Clarion C1 devices. At the cochleostomy site, and just within the cochlea, there was a robust fibrous and bony tissue response in all 21 ears and in most cases, there was a fibrous sheath surrounding the electrode in the middle ear. No recognizable open communication or potential communication between the middle ear and the inner ear was seen in any of the 21 ears. An inflammatory cellular response, including mononuclear leukocytes, histiocytes, and foreign body giant cells, were present in 12 of the 21 temporal bones (57%) and was most intense at the cochleostomy site. No statistically significant relationship was found between the presence or absence of inflammatory cells and the type of tissue graft used at surgery.

CONCLUSIONS

The histologic evidence presented in this study does not support open communication between the middle and the inner ear as part of the pathogenesis of bacterial meningitis as a late complication after cochlear implantation. Rather, the finding of a cellular inflammatory response in 12 of 21 temporal bones suggests that late hematogenous contamination and colonization of the implant is a much more likely pathogenic mechanism. This putative mechanism has implications for possible strategies to prevent meningitis after cochlear implantation.

Advances in ureteral stent design

BACKGROUND AND PURPOSE

Ureteral stents are widely used in patients with urologic disorders. This review critically evaluates the recent literature, providing an update on advances in the development and design of stents.

METHODS

A thorough MEDLINE and PubMed literature search on ureteral stents was performed, and all pertinent articles were reviewed in detail. This review was formulated on the basis of these articles, encompassing both basic science and clinical aspects of advances in ureteral stent design.

RESULTS

The advances in development and design have been directed primarily toward decreasing stent-related morbidity such as discomfort, bladder irritability, infection, encrustation, and the need for an additional cystoscopic procedure to remove the stent. In recent years, there have been many significant advances in the design of ureteral stents, including tapered distal ends, and construction, such as magnetic, biodegradable, and tissue-engineered materials.

CONCLUSIONS

There are many different bulk materials and coatings available for the manufacturing of ureteral stents, many of which are new. However, the ideal biomaterial has yet to be discovered. With ongoing research in this area, further advances in ureteral stent design will continue to improve outcomes for patients who require stents. Future advances are likely to include drug-coated stents, drug-eluting stents, and localized stenting techniques such as endoluminal gel paving.

Biomaterials in urology

Biomaterials such as urethral catheters, urethral stents, and ureteral stents are commonly used in patients with urologic disorders. There are currently many different bulk materials and coatings available for the manufacture of urinary tract biomaterials; however, the ideal material has yet to be discovered. Any potential biomaterial must undergo rigorous physical and biocompatibility testing before commercialization and use in humans. Despite significant advances in basic science research involving biocompatibility issues and biofilm formation, infection and encrustation remain associated with the use of biomaterials in the urinary tract, and therefore, limit their long-term use. This review critically evaluates the literature published over the past 12 months, providing an update on the current status of naturally derived and synthetic polymeric biomaterial use in the urinary tract. We focus on urethral catheters, urethral stents, and ureteral stents. We discuss issues of biocompatibility and new approaches to biocompatibility testing, biomaterials currently available for use, new biomaterials and coatings, and novel ureteral stent designs. Finally, we discuss the future of biomaterial use in the urinary tract.