Interfacial properties of surfactant proteins

A Review on Investigating the Interactions between Nanoparticles and the Pulmonary Surfactant Monolayer with Coarse-Grained Molecular Dynamics Method

Pulmonary drug delivery has garnered significant attention due to its targeted local lung action, minimal toxic side effects, and high drug utilization. However, the physicochemical properties of inhaled nanoparticles (NPs) used as drug carriers can influence their interactions with the pulmonary surfactant (PS) monolayer, potentially altering the fate of the NPs and impairing the biophysical function of the PS monolayer. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affect their interactions with the PS monolayer. Initially, the definition and properties of NPs, as well as the composition and characteristics of the PS monolayer, are introduced. Subsequently, the coarse-grained molecular dynamics (CGMD) simulation method for studying the interactions between NPs and the PS monolayer is presented. Finally, the implications of the hydrophobicity, size, shape, surface charge, surface modification, and aggregation of NPs on their interactions with the PS monolayer and on the composition of biomolecular corona are discussed. In conclusion, gaining a deeper understanding of the effects of the physicochemical properties of NPs on their interactions with the PS monolayer will contribute to the development of safer and more effective nanomedicines for pulmonary drug delivery.

Sprayed Urine Emits a Pungent Odor due to its Increased Adhesion to Vertical Objects via Urinary Proteins Rather Than to Changes in its Volatile Chemical Profile in Domestic Cats

Spraying urine on vertical objects by raising the tail is a commonly observed functional behavior for chemical communication in Felidae species, including domestic cats (Felis silvestris catus). The sprayed urine is recognized as a chemical signal for territorial ownership of their habitats. Previous studies reported that sprayed urine emits a more pungent odor than urine excreted from a squatting position. However, little is known about how sprayed urine acts as a strong scent mark in the environment. Here, we showed that sprayed urine originates only from bladder urine without any secretions, such as anal sac secretions, but it can effectively emit volatile organic compounds (VOCs) when smeared on vertical objects due to its strong adhesion. Chemical profiles of VOCs and odor qualities were similar between fresh sprayed urine and bladder urine sampled immediately after spraying from the same individuals. Meanwhile, feline-specific proteinuria arising from excretion of a carboxylesterase that produces a precursor of cat-specific odorants resulted in reduced surface tension of the urine and increased adhesion to vertical surfaces, which kept sprayed urine on the surfaces and led to the emission of large amounts of VOCs. In conclusion, proteinuria contributes to the emission of a strong odor through its enhanced adhesion to vertical objects without other secretions containing malodorous substances. These findings improve our understanding of the mechanism of scent marking via the spraying of urine for chemical communication in cats.

Pulmonary Surfactant: A Mighty Thin Film

Pulmonary surfactant is a critical component of lung function in healthy individuals. It functions in part by lowering surface tension in the alveoli, thereby allowing for breathing with minimal effort. The prevailing thinking is that low surface tension is attained by a compression-driven squeeze-out of unsaturated phospholipids during exhalation, forming a film enriched in saturated phospholipids that achieves surface tensions close to zero. A thorough review of past and recent literature suggests that the compression-driven squeeze-out mechanism may be erroneous. Here, we posit that a surfactant film enriched in saturated lipids is formed shortly after birth by an adsorption-driven sorting process and that its composition does not change during normal breathing. We provide biophysical evidence for the rapid formation of an enriched film at high surfactant concentrations, facilitated by adsorption structures containing hydrophobic surfactant proteins. We examine biophysical evidence for and against the compression-driven squeeze-out mechanism and propose a new model for surfactant function. The proposed model is tested against existing physiological and pathophysiological evidence in neonatal and adult lungs, leading to ideas for biophysical research, that should be addressed to establish the physiological relevance of this new perspective on the function of the mighty thin film that surfactant provides.

Insights into the mechanisms of interaction between inhalable lipid-polymer hybrid nanoparticles and pulmonary surfactant

Pulmonary delivery of small interfering RNA (siRNA) using nanoparticle-based delivery systems is promising for local treatment of respiratory diseases. We designed dry powder inhaler formulations of siRNA-loaded lipid-polymer hybrid nanoparticles (LPNs) with aerosolization properties optimized for inhalation therapy. Interactions between LPNs and pulmonary surfactant (PS) determine the fate of inhaled LPNs, but interaction mechanisms are unknown. Here we used surface-sensitive techniques to study how physicochemical properties and pathological microenvironments influence interactions between siRNA-loaded LPNs and supported PS layers. PS was deposited on SiO₂ surfaces as single bilayer or multilayers and characterized using quartz crystal microbalance with dissipation monitoring and Fourier-transform infrared spectroscopy with attenuated total reflection. Immobilization of PS as multilayers, resembling the structural PS organization in the alveolar subphase, effectively reduced the relative importance of interactions between PS and the underlying surface. However, the binding affinity between PS and LPNs was identical in the two models. The physicochemical LPN properties influenced the translocation pathways and retention time of LPNs. Membrane fluidity and electrostatic interactions were decisive for the interaction strength between LPNs and PS. Experimental conditions reflecting pathological microenvironments promoted LPN deposition. Hence, these results shed new light on design criteria for LPN transport through the air-blood barrier.

Pulmonary surfactant and drug delivery: vehiculization of a tryptophan-tagged antimicrobial peptide over the air-liquid interfacial highway

This work evaluates interaction of pulmonary surfactant (PS) and antimicrobial peptides (AMPs) in order to investigate (i) if PS can be used to transport AMPs, and (ii) to what extent PS interferes with AMP function and vice versa. This, in turn, is motivated by a need to find new strategies to treat bacterial infections in the airways. Low respiratory tract infections (LRTIs) are a leading cause of illness and death worldwide that, together with the problem of multidrug-resistant (MDR) bacteria, bring to light the necessity of developing effective therapies that ensure high bioavailability of the drug at the site of infection and display a potent antimicrobial effect. Here, we propose the combination of AMPs with PS to improve their delivery, exemplified for the hydrophobically end-tagged AMP, GRR10W4 (GRRPRPRPRPWWWW-NH₂), with previously demonstrated potent antimicrobial activity against a broad spectrum of bacteria under various conditions. Experiments using model systems emulating the respiratory interface and an operating alveolus, based on surface balances and bubble surfactometry, served to demonstrate that a fluorescently labelled version of GRR10W4 (GRR10W4-F), was able to interact and insert into PS membranes without affecting its biophysical function. Therefore, vehiculization of the peptide along air-liquid interfaces was enabled, even for interfaces previously occupied by surfactants layers. Furthermore, breathing-like compression-expansion dynamics promoted the interfacial release of GRR10W4-F after its delivery, which could further allow the peptide to perform its antimicrobial function. PS/GRR10W4-F formulations displayed greater antimicrobial effects and reduced toxicity on cultured airway epithelial cells compared to that of the peptide alone. Taken together, these results open the door to the development of novel delivery strategies for AMPs in order to increase the bioavailability of these molecules at the infection site via inhaled therapies.

Characterization of phospholipid-modified lung surfactant in vitro and in a neonatal ARDS model reveals anti-inflammatory potential and surfactant lipidome signatures

A strong inflammatory immune response drives the lung pathology in neonatal acute respiratory distress syndrome (nARDS). Anti-inflammatory therapy is therefore a promising strategy for improved treatment of nARDS. We demonstrate a new function of the anionic phospholipids POPG, DOPG, and PIP2 as inhibitors of IL-1β release by LPS and ATP-induced inflammasome activation in human monocyte-derived and lung macrophages. Curosurf® surfactant was enriched with POPG, DOPG, PIP2 and the head-group derivative IP3, biophysically characterized and applicability was evaluated in a piglet model of nARDS. The composition of pulmonary surfactant from piglets was determined by shotgun lipidomics screens. After 72 h of nARDS, levels of POPG, DOPG, and PIP2 were enhanced in the respective treatment groups. Otherwise, we did not observe changes of individual lipid species in any of the groups. Surfactant proteins were not affected, with the exception of the IP3 treated group. Our data show that POPG, DOPG, and PIP2 are potent inhibitors of inflammasome activation; their enrichment in a surfactant preparation did not induce any negative effects on lipid profile and reduced biophysical function in vitro was mainly observed for PIP2. These results encourage to rethink the current strategies of improving surfactant preparations by inclusion of anionic lipids as potent anti-inflammatory immune regulators.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Human Surfactant Protein SP-A1 and SP-A2 Variants Differentially Affect the Alveolar Microenvironment, Surfactant Structure, Regulation and Function of the Alveolar Macrophage, and Animal and Human Survival Under Various Conditions

The human innate host defense molecules, SP-A1 and SP-A2 variants, differentially affect survival after infection in mice and in lung transplant patients. SP-A interacts with the sentinel innate immune cell in the alveolus, the alveolar macrophage (AM), and modulates its function and regulation. SP-A also plays a role in pulmonary surfactant-related aspects, including surfactant structure and reorganization. For most (if not all) pulmonary diseases there is a dysregulation of host defense and inflammatory processes and/or surfactant dysfunction or deficiency. Because SP-A plays a role in both of these general processes where one or both may become aberrant in pulmonary disease, SP-A stands to be an important molecule in health and disease. In humans (unlike in rodents) SP-A is encoded by two genes (SFTPA1 and SFTPA2) and each has been identified with extensive genetic and epigenetic complexity. In this review, we focus on functional, structural, and regulatory differences between the two SP-A gene-specific products, SP-A1 and SP-A2, and among their corresponding variants. We discuss the differential impact of these variants on the surfactant structure, the alveolar microenvironment, the regulation of epithelial type II miRNome, the regulation and function of the AM, the overall survival of the organism after infection, and others. Although there have been a number of reviews on SP-A, this is the first review that provides such a comprehensive account of the differences between human SP-A1 and SP-A2.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Development and Characterization of Excipient Enhanced Growth (EEG) Surfactant Powder Formulations for Treating Neonatal Respiratory Distress Syndrome

This study aimed to develop and characterize a spray-dried powder aerosol formulation of a commercially available surfactant formulation, Survanta® intratracheal suspension, using the excipient enhanced growth (EEG) approach. Survanta EEG powders were prepared by spray drying of the feed dispersions containing Survanta® (beractant) intratracheal suspension, hygroscopic excipients (mannitol and sodium chloride), and a dispersion enhancer (l-leucine or trileucine) in 5 or 20% v/v ethanol in water using the Buchi Nano Spray Dryer B-90 HP. Powders were characterized for primary particle size, morphology, phospholipid content, moisture content, thermal properties, moisture sorption, and surface activity. The aerosol performance of the powders was assessed using a novel low-volume dry powder inhaler (LV-DPI) device operated with 3-mL volume of dispersion air. At both ethanol concentrations, in comparison to trileucine, l-leucine significantly reduced the primary particle size and span and increased the fraction of submicrometer particles of the Survanta EEG powders. The l-leucine-containing Survanta EEG powders exhibited good aerosolization performance with ≥ 88% of the mass emitted (% nominal) after 3 actuations from the modified LV-DPI device. In addition, l-leucine-containing powders had a low moisture content (< 3% w/w) with transition temperatures close to the commercial surfactant formulation and retained their surface tension reducing activity after formulation processing. A Survanta EEG powder containing l-leucine was developed which showed efficient aerosol delivery from the modified LV-DPI device using a low dispersion air volume.

Performance of Low Air Volume Dry Powder Inhalers (LV-DPI) when Aerosolizing Excipient Enhanced Growth (EEG) Surfactant Powder Formulations

Efficient delivery of dry powder aerosols dispersed with low volumes of air is challenging. This study aims to develop an efficient dry powder inhaler (DPI) capable of delivering spray-dried Survanta-EEG powders (3-10 mg) with a low volume (3 mL) of dispersion air. A series of iterative design modifications were made to a base low air volume actuated DPI. The modifications included the replacement of the original capsule chamber with an integral dose containment chamber, alteration of the entrainment air flow path through the device (from single-sided (SS) to straight through (ST)), change in the number of air inlet holes (from one to three), varying the outlet delivery tube length (45, 55, and 90 mm) and internal diameter (0.60, 0.89, and 1.17 mm). The modified devices were evaluated by determining the influence of the modifications and powder fill mass on aerosol performance of spray-dried Survanta-EEG powders. The optimal DPI was also evaluated for its ability to aerosolize a micronized powder. The optimized dose containment unit DPI had a 0.21 mL powder chamber, ST airflow path, three-0.60 mm air inlet holes, and 90 mm outlet delivery tube with 0.89 mm internal diameter. The powder dispersion characteristics of the optimal device were independent of fill mass with good powder emptying in one 3 mL actuation. At 10 mg fill mass, this device had an emitted mass of 5.3 mg with an aerosol Dv50 of 2.7 μm. After three 3 mL actuations, >85% of the spray-dried powder was emitted from the device. The emitted mass of the optimal device with micronized albuterol sulfate was >72% of the nominal fill mass of 10 mg in one 3 mL actuation. Design optimization produced a DPI capable of efficient performance with a dispersion air volume of 3 mL to aerosolize Survanta-EEG powders.

Structural hallmarks of lung surfactant: Lipid-protein interactions, membrane structure and future challenges

Lung surfactant (LS) is an outstanding example of how a highly regulated and dynamic membrane-based system has evolved to sustain a wealth of structural reorganizations in order to accomplish its biophysical function, as it coats and stabilizes the respiratory air-liquid interface in the mammalian lung. The present review dissects the complexity of the structure-function relationships in LS through an updated description of the lipid-protein interactions and the membrane structures that sustain its synthesis, secretion, interfacial performance and recycling. We also revise the current models and the biophysical techniques employed to study the membranous architecture of LS. It is important to consider that the structure and functional properties of LS are often studied in bulk or under static conditions, in spite that surfactant function is strongly connected with a highly dynamic behaviour, sustained by very polymorphic structures and lipid-lipid, lipid-protein and protein-protein interactions that reorganize in precise spatio-temporal coordinates. We have tried to underline the evidences available of the existence of such structural dynamism in LS. A last important aspect is that the synthesis and assembly of LS is a strongly regulated intracellular process to ensure the establishment of the proper interactions driving LS surface activity, while protecting the integrity of other cell membranes. The use of simplified lipid models or partial natural materials purified from animal tissues could be too simplistic to understand the true molecular mechanisms defining surfactant function in vivo. In this line, we will bring into the attention of the reader the methodological challenges and the questions still open to understand the structure-function relationships of LS at its full biological relevance.

Pulmonary surfactant and drug delivery: Vehiculization, release and targeting of surfactant/tacrolimus formulations

This work explores the potential for strategizing pulmonary surfactant (PS) for drug delivery over the respiratory air-liquid interface: the interfacial delivery. The efficacy of PS- and interface-assisted drug vehiculization was determined both in vitro and in vivo using a native purified porcine PS combined with the hydrophobic anti-inflammatory drug Tacrolimus (TAC), a calcineurin inhibitor. In vitro assays were conducted in a novel double surface balance setup designed to emulate compression-expansion dynamics applied to interfacially connected drug donor and recipient compartments. In this setup, PS transported TAC efficiently over air-liquid interfaces, with compression/expansion breathing-like dynamics enhancing rapid interface-assisted diffusion and drug release. The efficacy of PS-assisted TAC vehiculization was also evaluated in vivo in a mouse model of lipopolysaccharide (LPS)-induced acute lung injury (ALI). In anesthetized mice, TAC combined with PS was intra-nasally (i.n) instilled prior administering i.n. LPS. PS/TAC pre-treatment caused greater TAC internalization into a higher number of lung cells obtained from bronchoalveolar lavages (BAL) than TAC pre-treatment alone. Additionally, the PS/TAC combination but not TAC or PS alone attenuated the LPS-induced pro-inflammatory effects reducing cells and proteins in BAL fluid. These findings indicated that PS-mediated increase in TAC uptake blunted the pro-injurious effects of LPS, suggesting a synergistic anti-inflammatory effect of PS/drug formulations. These in vitro and in vivo results establish the potential utility of PS to open novel effective delivery strategies for inhaled drugs.

Molecular and biophysical basis for the disruption of lung surfactant function by chemicals

With the intention to move away from animal testing for the toxicological evaluation of chemicals comes the need to develop new approach methodologies which are mechanism-anchored and target relevant key events leading to an adverse outcome. To date, no validated alternative methods are available for studying the acute inhalation toxicity potential of airborne chemicals but the constrained drop surfactometer measuring the surface tension of a drop of lung surfactant presents as a promising candidate. Indeed, the correlation of the increase in minimum surface tension of lung surfactant in vitro with changes in the breathing patterns of mice after inhalation of test compounds has been shown in multiple studies. However, the causal factors leading to lung surfactant inactivation remain speculative. This paper combines molecular and biophysical methods (constrained drop and captive bubble surfactometers, Langmuir-Blodgett balance, epifluorescence microscopy, cryogenic transmission electron microscopy, and differential scanning calorimetry) applied to purified porcine lung surfactant and dipalmitoylphosphatidylcholine interfacial films to gain insights into the disruption of lung surfactant function by three chemicals known to show acute inhalation toxicity (trimethoxyoctylsilane, methyl 3-oxo-2-pentylcyclopentaneacetate, and diisopentyl ether). The results of this study suggest that the test chemicals intercalate between the phospholipids at the air-liquid interface, reduce the stability of the films, and decrease the cohesivity of interface-associated multilayered structures thereby perturbing the lung surfactant surface activity. These findings contribute to a better understanding of chemically-induced lung surfactant function disruption.

Interactions of particulate matter and pulmonary surfactant: Implications for human health

Particulate matter (PM), which is the primary contributor to air pollution, has become a pervasive global health threat. When PM enters into a respiratory tract, the first body tissues to be directly exposed are the cells of respiratory tissues and pulmonary surfactant. Pulmonary surfactant is a pivotal component to modulate surface tension of alveoli during respiration. Many studies have proved that PM would interact with pulmonary surfactant to affect the alveolar activity, and meanwhile, pulmonary surfactant would be adsorbed to the surface of PM to change the toxic effect of PM. This review focuses on recent studies of the interactions between micro/nanoparticles (synthesized and environmental particles) and pulmonary surfactant (natural surfactant and its models), as well as the health effects caused by PM through a few significant aspects, such as surface properties of PM, including size, surface charge, hydrophobicity, shape, chemical nature, etc. Moreover, in vitro and in vivo studies have shown that PM leads to oxidative stress, inflammatory response, fibrosis, and cancerization in living bodies. By providing a comprehensive picture of PM-surfactant interaction, this review will benefit both researchers for further studies and policy-makers for setting up more appropriate regulations to reduce the adverse effects of PM on public health.

Identification of lipid biomarker from serum in patients with chronic obstructive pulmonary disease

BACKGROUND

Chronic obstructive pulmonary disease (COPD) is the third leading cause of death in the United States with no effective treatment. The current diagnostic method, spirometry, does not accurately reflect the severity of COPD disease status. Therefore, there is a pressing unmet medical need to develop noninvasive methods and reliable biomarkers to detect early stages of COPD. Lipids are the fundamental components of cell membranes, and dysregulation of lipids was proven to be associated with COPD. Lipidomics is a comprehensive approach to all the pathways and networks of cellular lipids in biological systems. It is widely used for disease diagnosis, biomarker identification, and pathology disorders detection relating to lipid metabolism.

METHODS

In the current study, a total of 25 serum samples were collected from 5 normal control subjects and 20 patients with different stages of COPD according to the global initiative for chronic obstructive lung disease (GOLD) (GOLD stages I ~ IV, 5 patients per group). After metabolite extraction, lipidomic analysis was performed using electrospray ionization mass spectrometry (ESI-MS) to detect the serum lipid species. Later, the comparisons of individual lipids were performed between controls and patients with COPD. Orthogonal projections to latent structures discriminant analysis (OPLS-DA) and receiver operating characteristic (ROC) analysis were utilized to test the potential biomarkers. Finally, correlations between the validated lipidomic biomarkers and disease stages, age, FEV1% pack years and BMI were evaluated.

RESULTS

Our results indicate that a panel of 50 lipid metabolites including phospholipids, sphingolipids, glycerolipids, and cholesterol esters can be used to differentiate the presence of COPD. Among them, 10 individual lipid species showed significance (p < 0.05) with a two-fold change. In addition, lipid ratios between every two lipid species were also evaluated as potential biomarkers. Further multivariate data analysis and receiver operating characteristic (ROC: 0.83 ~ 0.99) analysis suggest that four lipid species (AUC:0.86 ~ 0.95) and ten lipid ratios could be potential biomarkers for COPD (AUC:0.94 ~ 1) with higher sensitivity and specificity. Further correlation analyses indicate these potential biomarkers were not affected age, BMI, stages and FEV1%, but were associated with smoking pack years.

CONCLUSION

Using lipidomics and statistical methods, we identified unique lipid signatures as potential biomarkers for diagnosis of COPD. Further validation studies of these potential biomarkers with large population may elucidate their roles in the development of COPD.

Development of tracheobronchial fluid for in vitro bioaccessibility assessment of particulates-bound trace elements

This study was piloted to evaluate bioaccessibility of particulate-bound trace elements using synthetic epithelia lung fluid; in which dipalmitoylphophatidylcholine was substituted with locus bean gum (LBSFL). The resulting data reveal that no significant change in physicochemical characteristics of the stimulated lung fluid compare with similar synthetic fluids; pH value of 7.3, density (0.998gcm⁻³), conductivity (13.9 mS m^-1), surface viscosity (1.136 × 10^-12 pas) and surface tension (50.6 mN m^-1). To prove the potential applicability of the fluid in in vitro bioaccessibility test, we compared bioaccessibility of particulates-bound trace elements using this fluid with those of stimulated epithelial lung fluid. Bioaccessibility were relatively low values (<30%) in locus bean substituted lung fluid and stimulated epithelial lung fluid. Specifically, As and Cd had significantly higher bioaccessibility values in locus bean substituted lung fluid than stimulated epithelial lung fluid. The data demonstrate that fluid formulated and used in this study can provide a suitable means of evaluate bioaccessibility of trace elements-bound to airborne particulates.

•

The fluid was used for assessing bioaccessibility of particulate matters-bound trace elements

•

The formulated fluid can be applied to study in toxicity assessment

•

The data can be used for inter-laboratory comparison of bioaccessibility of particulate -bound trace element and could stimulate environmental concerns on the impacts of airborne particulates.

Role of Endogenous Ingredients in Meibum and Film Structures on Stability of the Tear Film Lipid Layer against Lateral Compression

The property and structure of spread films of meibum extruded from rabbit eyelids and its fractions were investigated using the Langmuir film balance technique and Brewster angle microscopy in order to understand the influence of endogenous ingredients in meibum on the structure and stability of the tear film lipid layer against mechanical stimulus. Surface pressure (?)?film area ( A) isotherms for meibum were measured upon repetitive high-speed compression?expansion cycles and were found almost identical to each other with very small hysteresis, indicating the high stability of the meibum film. Brewster angle microcopy observation implied the spontaneous formation of condensed-phase network structures which consist primarily of wax esters and cholesteryl esters as nonpolar ingredients, coexisting with a monolayer phase of polar lipids two-dimensionally confined by the networks, which were spontaneously formed in the meibum film. The networks were gathered densely and deformed when the film was laterally compressed with barriers of Langmuir trough, but returned to the dispersed networks when expanded. The influence of temperature and salts dissolved in an aqueous subphase was also investigated. The results indicated that the temperature change (20 and 35 ?C) induced a difference of surface pressure at the same film areas in rather compressed films, and the presence of salts in the subphase expanded the films. However, the features of isotherm and surface morphology of the film, including their reversibility, were maintained. Phospholipid-removed meibum also formed a stable film, but slight changes were found in the hysteresis and film morphology compared to those in the meibum film. In contrast, in a film of phospholipid- and cholesterol-removed meibum, three-dimensional aggregates grew upon the first compression and not redispersed by the subsequent expansion, giving noticeable hysteresis between the isotherms. It is considered that high deformability upon compression and resilience upon expansion of the networks as well as reversible collapse and spreading property of the confined monolayer phase would hold the stability of the meibum film against repeated compressions.

The Impact of Nonequilibrium Conditions in Lung Surfactant: Structure and Composition Gradients in Multilamellar Films

The lipid-protein mixture that covers the lung alveoli, lung surfactant, ensures mechanical robustness and controls gas transport during breathing. Lung surfactant is located at an interface between water-rich tissue and humid, but not fully saturated, air. The resulting humidity difference places the lung surfactant film out of thermodynamic equilibrium, which triggers the buildup of a water gradient. Here, we present a millifluidic method to assemble multilamellar interfacial films from vesicular dispersions of a clinical lung surfactant extract used in replacement therapy. Using small-angle X-ray scattering, infrared, Raman, and optical microscopies, we show that the interfacial film consists of several coexisting lamellar phases displaying a substantial variation in water swelling. This complex phase behavior contrasts to observations made under equilibrium conditions. We demonstrate that this disparity stems from additional lipid and protein gradients originating from differences in their transport properties. Supplementing the extract with cholesterol, to levels similar to the endogenous lung surfactant, dispels this complexity. We observed a homogeneous multilayer structure consisting of a single lamellar phase exhibiting negligible variations in swelling in the water gradient. Our results demonstrate the necessity of considering nonequilibrium thermodynamic conditions to study the structure of lung surfactant multilayer films, which is not accessible in bulk or monolayer studies. Our reconstitution methodology also opens avenues for lung surfactant pharmaceuticals and the understanding of composition, structure, and property relationships at biological air-liquid interfaces.

Design and development of a biorelevant simulated human lung fluid

Biorelevant fluids are required to enable meaningful in vitro experimental determinations of the biopharmaceutical properties of inhaled medicines, e.g. drug solubility, particle dissolution, cellular uptake. Our aim was to develop a biorelevant simulated lung fluid (SLF) with a well-defined composition and evidence-based directions for use. The SLF contained dipalmitoylphosphotidylcholine, dipalmitoylphosphatidylglycerol, cholesterol, albumin, IgG, transferrin and antioxidants. Freshly made SLF had pH 7.2, viscosity 1.138 × 10⁻³ Pa s, conductivity 14.5 mS/m, surface tension 54.9 mN/m and density 0.999 g/cm³. Colour, surface tension and conductivity were the most sensitive indicators of product deterioration. The simulant was stable for 24 h and 48 h at 37 °C and 21 °C, respectively, (in-use stability) and for 14 days when stored in a refrigerator (storage stability). To extend stability, the SLF was vacuum freeze-dried in batches to produce lyophilised powder that can be reconstituted readily when needed at the point of use. In conclusion, we have reported the composition and manufacture of a biorelevant, synthetic SLF, provided a detailed physico-chemical characterisation and recommendations for how to store and use a product that can be used to generate experimental data to provide inputs to computational models that predict drug bioavailability in the lungs.

Immunolocalization of Surfactant Proteins SP-A, SP-B, SP-C, and SP-D in Infantile Labial Glands and Mucosa

Surfactant proteins in different glandular structures of the oral cavity display antimicrobial activity for protection of invading microorganisms. Moreover, they are involved in lowering liquid tension in fluids and facilitate secretion flows. Numerous investigations for studying the occurrence of surfactant proteins in glandular tissues were performed using different methods. In the oral cavity, minor salivary glands secrete saliva continuously for the maintenance of a healthy oral environment. For the first time, we could show that infantile labial glands show expression of the surfactant proteins (SP) SP-A, SP-B, SP-C, and SP-D in acinar cells and the duct system in different intensities. The stratified squamous epithelium of the oral mucosa revealed positive staining for SPs in various cell layers.

Effects of the expectorant drug ambroxol hydrochloride on chemically induced lung inflammatory and neoplastic lesions in rodents

Ambroxol hydrochloride (AH) is an expectorant drug used to stimulate pulmonary surfactant and serous airway secretion. Surfactant proteins (SPs) are essential for maintaining respiratory structure and function, although SP expression has also been reported in lung inflammatory and proliferative lesions. To determine whether AH exerts modulatory effects on these lung lesions, we examined its effects on pleural thickening induced by intrathoracic administration of dipotassium titanate (TISMO) in A/JJmsSlc (A/J) mice. We also analyzed the modulatory effects of AH on neoplastic lung lesions induced by 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in A/J mice and by N-nitrosobis (2-hydroxypropyl) amine (DHPN) in F344/DuCrlCrj (F344) rats. A/J mice treated with TISMO showed decreased body weight, increased white blood cell (WBC) counts, and pleural thickening caused by pleuritis and poor general condition. However, A/J mice treated with TISMO + 120 ppm showed significant recovery of body weight and WBC counts to the same levels as those of A/J mice not treated with TISMO, although no significant differences were observed in histopathological changes including the immunohistopathological expression of IL-1β in the lung and maximum pleural thickness regardless of AH treatment. In the NNK and DHPN experiments, no significant differences in body weight, hematology, plasma biochemistry, and histopathological changes were associated with AH concentration. These results suggest that AH potentially exerts anti-inflammatory effects but does not have a direct suppressive effect on lung tumorigenesis in rodents.

Characteristics of surfactant proteins in tumorigenic and inflammatory lung lesions in rodents

Surfactant proteins (SPs) are essential for the proper structure and respiratory function of the lungs. There are four subtypes of SPs: SP-A, SP-B, SP-C, and SP-D. The expectorant drug ambroxol hydrochloride is clinically used to stimulate pulmonary surfactant and airway serous secretion. In addition, previous studies showed that ambroxol regulated SP production and attenuated pulmonary inflammation, with ambroxol hydrochloride being found to suppress quartz-induced lung inflammation via stimulation of pulmonary surfactant and airway serous secretion. In this study, we investigated the expression of SP-A, SP-B, SP-C, and SP-D in neoplastic and inflammatory lung lesions in rodents, as well as their possible application as potential markers for diagnostic purposes. SP-B and SP-C showed strong expression in lung hyperplasia and adenoma, whereas SP-A and SP-D were expressed in the mucus or exudates of inflammatory alveoli. Rodent tumorigenic hyperplasic tissues induced by various carcinogens were positive for napsin A, an aspartic proteinase involved in the maturation of SP-B; this indicated a focal increase in type II pneumocytes in the lungs. Therefore, high expression of napsin A in the alveolar walls may serve as a useful marker for prediction of the tumorigenic potential of lung hyperplasia in rodents.

Compatibility of PEGylated Polymer Nanoparticles with the Biophysical Function of Lung Surfactant

To minimize an unwanted interference of colloidal drug delivery vehicles with the biophysical functionality of lung surfactant, the surface of polymer nanoparticles was modified with poly(ethylene glycol) (PEGylation). Plain poly(lactide) nanoparticles provoked a statistically relevant decrease in the surface activity of the naturally derived lung surfactant, Alveofact. By contrast, the extent of lung surfactant inhibition induced by PEGylated polymer nanoparticles was significantly attenuated. Here, escalations of the PEG coating layer thickness (>3 nm, with a chain-to-chain distance of ≤4 nm) on the colloidal surface were capable of circumventing bioadverse effects. Accordingly, polymer nanoparticles equipped with PEG chains with a molecular weight above 2-5 kDa were compatible with the biophysical function of Alveofact. Overall, PEGylation of polymer nanoparticles presents a promising approach for the development of inhalation nanomedicines revealing negligible effects on the surface activity of the lining layer present in the deep lungs.

A Biocompatible Synthetic Lung Fluid Based on Human Respiratory Tract Lining Fluid Composition

PURPOSE

To characterise a biorelevant simulated lung fluid (SLF) based on the composition of human respiratory tract lining fluid. SLF was compared to other media which have been utilized as lung fluid simulants in terms of fluid structure, biocompatibility and performance in inhalation biopharmaceutical assays.

METHODS

The structure of SLF was investigated using cryo-transmission electron microscopy, photon correlation spectroscopy and Langmuir isotherms. Biocompatibility with A549 alveolar epithelial cells was determined by MTT assay, morphometric observations and transcriptomic analysis. Biopharmaceutical applicability was evaluated by measuring the solubility and dissolution of beclomethasone dipropionate (BDP) and fluticasone propionate (FP), in SLF.

RESULTS

SLF exhibited a colloidal structure, possessing vesicles similar in nature to those found in lung fluid extracts. No adverse effect on A549 cells was apparent after exposure to the SLF for 24 h, although some metabolic changes were identified consistent with the change of culture medium to a more lung-like composition. The solubility and dissolution of BDP and FP in SLF were enhanced compared to Gamble's solution.

CONCLUSION

The SLF reported herein constitutes a biorelevant synthetic simulant which is suitable to study biopharmaceutical properties of inhalation medicines such as those being proposed for an inhaled biopharmaceutics classification system.

Suppressive effects of the expectorant drug ambroxol hydrochloride on quartz-induced lung inflammation in F344 rats

Surfactant proteins (SPs) are essential to respiratory structure and function. The expectorant drug ambroxol hydrochloride is clinically prescribed to stimulate pulmonary surfactant and airway serous secretion. Therefore, ambroxol hydrochloride may affect SP production and pulmonary inflammation. Lung toxicity of fine particles of various materials has been examined previously in our in vivo bioassay using the intratracheal (i.t.) instillation approach. In the present study, we evaluated modulatory effects of ambroxol hydrochloride on quartz-induced lung inflammation in F344 rats. Male 6-week-old F344 rats were exposed by i.t. instillation to 2 mg of quartz particles suspended in 0.2 mL of saline. Ambroxol hydrochloride was administered at 0, 12, and 120 ppm in rat basal diet for 28 days, and then formalin-fixed paraffin-embedded lung, liver, and kidney samples were prepared. No changes in general condition, body and organ weights, or food consumption upon exposure to quartz were noted. The mean ambroxol intake in rats of the 12 ppm group was comparable to the human conventional dose. Histopathology of lung lesions was evaluated, and the degree of inflammation was scored. At 120 ppm, ambroxol hydrochloride significantly decreased individual lung inflammation scores for pulmonary edema and lymph follicle proliferation around the bronchiole, as well as the total inflammation score, in quartz-treated rats. Expression of SP-C in the type II alveolar cells and macrophages was greater in inflammatory lesions than in non-inflamed areas. Ambroxol treatment did not affect expression of SP-B and SP-C. In conclusion, we demonstrated that ambroxol hydrochloride relieves quartz-induced lung inflammation.

Evolution, Development, and Function of the Pulmonary Surfactant System in Normal and Perturbed Environments

Surfactant lipids and proteins form a surface active film at the air-liquid interface of internal gas exchange organs, including swim bladders and lungs. The system is uniquely positioned to meet both the physical challenges associated with a dynamically changing internal air-liquid interface, and the environmental challenges associated with the foreign pathogens and particles to which the internal surface is exposed. Lungs range from simple, transparent, bag-like units to complex, multilobed, compartmentalized structures. Despite this anatomical variability, the surfactant system is remarkably conserved. Here, we discuss the evolutionary origin of the surfactant system, which likely predates lungs. We describe the evolution of surfactant structure and function in invertebrates and vertebrates. We focus on changes in lipid and protein composition and surfactant function from its antiadhesive and innate immune to its alveolar stability and structural integrity functions. We discuss the biochemical, hormonal, autonomic, and mechanical factors that regulate normal surfactant secretion in mature animals. We present an analysis of the ontogeny of surfactant development among the vertebrates and the contribution of different regulatory mechanisms that control this development. We also discuss environmental (oxygen), hormonal and biochemical (glucocorticoids and glucose) and pollutant (maternal smoking, alcohol, and common "recreational" drugs) effects that impact surfactant development. On the adult surfactant system, we focus on environmental variables including temperature, pressure, and hypoxia that have shaped its evolution and we discuss the resultant biochemical, biophysical, and cellular adaptations. Finally, we discuss the effect of major modern gaseous and particulate pollutants on the lung and surfactant system.

The mechanism of collapse of heterogeneous lipid monolayers

Collapse of homogeneous lipid monolayers is known to proceed via wrinkling/buckling, followed by folding into bilayers in water. For heterogeneous monolayers with phase coexistence, the mechanism of collapse remains unclear. Here, we investigated collapse of lipid monolayers with coexisting liquid-liquid and liquid-solid domains using molecular dynamics simulations. The MARTINI coarse-grained model was employed to simulate monolayers of ∼80 nm in lateral dimension for 10-25 μs. The monolayer minimum surface tension decreased in the presence of solid domains, especially if they percolated. Liquid-ordered domains facilitated monolayer collapse due to the spontaneous curvature induced at a high cholesterol concentration. Upon collapse, bilayer folds formed in the liquid (disordered) phase; curved domains shifted the nucleation sites toward the phase boundary. The liquid (disordered) phase was preferentially transferred into bilayers, in agreement with the squeeze-out hypothesis. As a result, the composition and phase distribution were altered in the monolayer in equilibrium with bilayers compared to a flat monolayer at the same surface tension. The composition and phase behavior of the bilayers depended on the degree of monolayer compression. The monolayer-bilayer connection region was enriched in unsaturated lipids. Percolation of solid domains slowed down monolayer collapse by several orders of magnitude. These results are important for understanding the mechanism of two-to-three-dimensional transformations in heterogeneous thin films and the role of lateral organization in biological membranes. The study is directly relevant for the function of lung surfactant, and can explain the role of nanodomains in its surface activity and inhibition by an increased cholesterol concentration.

Investigating the effect of particle size on pulmonary surfactant phase behavior

We study the impact of the addition of particles of a range of sizes on the phase transition behavior of lung surfactant under compression. Charged particles ranging from micro- to nanoscale are deposited on lung surfactant films in a Langmuir trough. Surface area versus surface pressure isotherms and fluorescent microscope observations are utilized to determine changes in the phase transition behavior. We find that the deposition of particles close to 20 nm in diameter significantly impacts the coexistence of the liquid-condensed phase and liquid-expanded phase. This includes morphological changes of the liquid-condensed domains and the elimination of the squeeze-out phase in isotherms. Finally, a drastic increase of the domain fraction of the liquid-condensed phase can be observed for the deposition of 20-nm particles. As the particle size is increased, we observe a return to normal phase behavior. The net result is the observation of a critical particle size that may impact the functionality of the lung surfactant during respiration.

Calf Lung Surfactant Recovers Surface Functionality After Exposure to Aerosols Containing Polymeric Particles

BACKGROUND

Recent studies have shown that colloidal particles can disrupt the interfacial properties of lung surfactant and thus key functional abilities of lung surfactant. However, the mechanisms underlying the interactions between aerosols and surfactant films remain poorly understood, as our ability to expose films to particles via the aerosol route has been limited. The aim of this study was to develop a method to reproducibly apply aerosols with a quantifiable particle dose on lung surfactant films and investigate particle-induced changes to the interfacial properties of the surfactant under conditions that more closely mimic those in vivo.

METHODS

Films of DPPC and Infasurf^® were exposed to aerosols containing polystyrene particles generated using a Dry Powder Insufflator^™. The dose of particles deposited on surfactant films was determined via light absorbance. The interfacial properties of the surfactant were studied using a Langmuir-Wilhelmy balance during surfactant compression to film collapse and cycles of surface compression and expansion at a fast cycling rate within a small surface area range.

RESULTS

Exposure of surfactant films to aerosols led to reproducible dosing of particles on the films. In film collapse experiments, particle deposition led to slight changes in collapse surface pressure and surface area of both surfactants. However, longer interaction times between particles and Infasurf^® films resulted in time-dependent inhibition of surfactant function. When limited to lung relevant surface pressures, particles reduced the maximum surface pressure that could be achieved. This inhibitory effect persisted for all compression-expansion cycles in DPPC, but normal surfactant behavior was restored in Infasurf^® films after five cycles.

CONCLUSIONS

The observation that Infasurf^® was able to quickly restore its function after exposure to aerosols under conditions that better mimicked those in vivo suggests that particle-induced surfactant inhibition is unlikely to occur in vivo due to an aerosol exposure.

Biophysical inhibition of pulmonary surfactant function by polymeric nanoparticles: role of surfactant protein B and C

The current study investigated the mechanisms involved in the process of biophysical inhibition of pulmonary surfactant by polymeric nanoparticles (NP). The minimal surface tension of diverse synthetic surfactants was monitored in the presence of bare and surface-decorated (i.e. poloxamer 407) sub-100 nm poly(lactide) NP. Moreover, the influence of NP on surfactant composition (i.e. surfactant protein (SP) content) was studied. Dose-elevations of SP advanced the biophysical activity of the tested surfactant preparation. Surfactant-associated protein C supplemented phospholipid mixtures (PLM-C) were shown to be more susceptible to biophysical inactivation by bare NP than phospholipid mixture supplemented with surfactant protein B (PLM-B) and PLM-B/C. Surfactant function was hindered owing to a drastic depletion of the SP content upon contact with bare NP. By contrast, surface-modified NP were capable of circumventing unwanted surfactant inhibition. Surfactant constitution influences the extent of biophysical inhibition by polymeric NP. Steric shielding of the NP surface minimizes unwanted NP-surfactant interactions, which represents an option for the development of surfactant-compatible nanomedicines.

Composition, structure and mechanical properties define performance of pulmonary surfactant membranes and films

The respiratory surface in the mammalian lung is stabilized by pulmonary surfactant, a membrane-based system composed of multiple lipids and specific proteins, the primary function of which is to minimize the surface tension at the alveolar air-liquid interface, optimizing the mechanics of breathing and avoiding alveolar collapse, especially at the end of expiration. The goal of the present review is to summarize current knowledge regarding the structure, lipid-protein interactions and mechanical features of surfactant membranes and films and how these properties correlate with surfactant biological function inside the lungs. Surfactant mechanical properties can be severely compromised by different agents, which lead to surfactant inhibition and ultimately contributes to the development of pulmonary disorders and pathologies in newborns, children and adults. A detailed comprehension of the unique mechanical and rheological properties of surfactant layers is crucial for the diagnostics and treatment of lung diseases, either by analyzing the contribution of surfactant impairment to the pathophysiology or by improving the formulations in surfactant replacement therapies. Finally, a short review is also included on the most relevant experimental techniques currently employed to evaluate lung surfactant mechanics, rheology, and inhibition and reactivation processes.

Charged particles interacting with a mixed supported lipid bilayer as a biomimetic pulmonary surfactant

This study shows the interactions of charged particles with mixed supported lipid bilayers (SLB) as biomimetic pulmonary surfactants. We tested two types of charged particles: positively charged and negatively charged particles. Two parameters were measured: adsorption density of particles on the SLB and the diffusion coefficient of lipids by FRAPP techniques as a measure of interaction strength between particles and lipids. We found that positively charged particles do not adsorb on the bilayer, probably due to the electrostatic repulsion between positively charged parts of the lipid head and the positive groups on the particle surface, therefore no variation in diffusion coefficient of lipid molecules was observed. On the contrary, the negatively charged particles, driven by electrostatic interactions are adsorbed onto the supported bilayer. The adsorption of negatively charged particles increases with the zeta-potential of the particle. Consecutively, the diffusion coefficient of lipids is reduced probably due to binding onto the lipid heads which slows down their Brownian motion. The results are directly relevant for understanding the interactions of particulate matter with pulmonary structures which could lead to pulmonary surfactant inhibition or deficiency causing severe respiratory distress or pathologies.

Immunohistochemical characteristics of surfactant proteins a, B, C and d in inflammatory and tumorigenic lung lesions of f344 rats

Surfactant proteins (SPs), originally known as human lung surfactants, are essential to respiratory structure and function. There are 4 subtypes, SP-A, SP-B, SP-C and SP-D, with SP-A and SP-D having immunological functions, and SP-B and SP-C having physicochemical properties that reduce the surface tension at biological interfaces. In this experiment, the expressions of SP-A, SP-B, SP-C and SP-D in lung neoplastic lesions induced by N-bis (2-hydroxypropyl) nitrosamine (DHPN) and inflammatory lesions due to quartz instillation were examined and compared immunohistochemically. Formalin fixed paraffin embedded (FFPE) lung samples featuring inflammation were obtained with a rat quartz instillation model, and neoplastic lesions, hyperplasias and adenomas, were obtained with the rat DHPN-induced lung carcinogenesis model. In the rat quartz instillation model, male 10-week old F344 rats were exposed by intratracheal instillation (IT) to quartz at a dose of 2 mg/rat suspended in saline (0.2 ml) on day 0, and sacrificed on day 28. Lung tumorigenesis in F344 male rats was initiated by DHPN in drinking water for 2 weeks, and the animals were then sacrificed in week 30. Lung proliferative lesions, hyperplasias and adenomas, were observed with DHPN, and inflammation was observed with quartz. The expressions of SP-A, SP-B, SP-C and SP-D were examined immunohistochemically. SP-B and SP-C showed strong expression in lung hyperplasias and adenomas, while SP-A and SP-D were observed in mucus or exudates in inflammatory alveoli. These results suggest the possibility that SP-B and SP-C are related to lung tumorigenesis.

Improvement of pulmonary surfactant activity by introducing D-amino acids into highly hydrophobic amphiphilic α-peptide Hel 13-5

The high costs of artificial pulmonary surfactants, ranging in hundreds per kilogram of body weight, used for treating the respiratory distress syndrome (RDS) premature babies have limited their applications. We have extensively studied soy lecithins and higher alcohols as lipid alternatives to expensive phospholipids such as DPPC and PG. As a substitute for the proteins, we have synthesized the peptide Hel 13-5D3 by introducing D-amino acids into a highly lipid-soluble, basic amphiphilic peptide, Hel 13-5, composed of 18 amino acid residues. Analysis of the surfactant activities of lipid-amphiphilic artificial peptide mixtures using lung-irrigated rat models revealed that a mixture (Murosurf SLPD3) of dehydrogenated soy lecithin, fractionated soy lecithin, palmitic acid (PA), and peptide Hel 13-5D3 (40:40:17.5:2.5, by weight) superior pulmonary surfactant activity than a commercially available pulmonary surfactant (beractant, Surfacten®). Experiments using ovalbumin-sensitized model animals revealed that the lipid-amphiphilic artificial peptide mixtures provided significant control over an increase in the pulmonary resistance induced by premature allergy reaction and reduced the number of acidocytes and neutrophils in lung-irrigated solution. The newly developed low-cost pulmonary surfactant system may be used for treatment of a wide variety of respiratory diseases.

Physiological variables affecting surface film formation by native lamellar body-like pulmonary surfactant particles

Pulmonary surfactant (PS) is a surface active complex of lipids and proteins that prevents the alveolar structures from collapsing and reduces the work of breathing by lowering the surface tension at the alveolar air-liquid interface (ALI). Surfactant is synthesized by the alveolar type II (AT II) cells, and it is stored in specialized organelles, the lamellar bodies (LBs), as tightly packed lipid bilayers. Upon secretion into the alveolar lining fluid, a large fraction of these particles retain most of their packed lamellar structure, giving rise to the term lamellar body like-particles (LBPs). Due to their stability in aqueous media, freshly secreted LBPs can be harvested from AT II cell preparations. However, when LBPs get in contact with an ALI, they quickly and spontaneously adsorb into a highly organized surface film. In the present study we investigated the adsorptive capacity of LBPs at an ALI under relevant physiological parameters that characterize the alveolar environment in homeostatic or in pathological conditions. Adsorption of LBPs at an ALI is highly sensitive to pH, temperature and albumin concentration and to a relatively lesser extent to changes in osmolarity or Ca(2+) concentrations in the physiological range. Furthermore, proteolysis of LBPs significantly decreases their adsorptive capacity confirming the important role of surfactant proteins in the formation of surface active films.

Effect of hypoxia on lung gene expression and proteomic profile: insights into the pulmonary surfactant response

Exposure of lung to hypoxia has been previously reported to be associated with significant alterations in the protein content of bronchoalveolar lavage (BAL) and lung tissue. In the present work we have used a proteomic approach to describe the changes in protein complement induced by moderate long-term hypoxia (rats exposed to 10% O2 for 72h) in BAL and lung tissue, with a special focus on the proteins associated with pulmonary surfactant, which could indicate adaptation of this system to limited oxygen availability. The analysis of the general proteomic profile indicates a hypoxia-induced increase in proteins associated with inflammation both in lavage and lung tissue. Analysis at mRNA and protein levels revealed no significant changes induced by hypoxia on the content in surfactant proteins or their apparent oligomeric state. In contrast, we detected a hypoxia-induced significant increase in the expression and accumulation of hemoglobin in lung tissue, at both mRNA and protein levels, as well as an accumulation of hemoglobin both in BAL and associated with surface-active membranes of the pulmonary surfactant complex. Evaluation of pulmonary surfactant surface activity from hypoxic rats showed no alterations in its spreading ability, ruling out inhibition by increased levels of serum or inflammatory proteins.

BIOLOGICAL SIGNIFICANCE

This work reveals that hypoxia induces extensive changes in the proteomic profile of lung bronchoalveolar lavage, including the presence of proteins related with inflammation both in lung tissue and lavage, and a significant increase in the synthesis and secretion by the lung tissue of different forms of hemoglobin. The level of specific pulmonary surfactant-associated proteins is not substantially altered due to hypoxia, but hypoxia-adapted surfactant exhibits an enhanced ability to form surface-active films at the air-liquid interface. The increased amount of β-globin integrated into the operative surfactant complexes obtained from hypoxic rats is a relevant feature that points to the existence of adaptive responses coupling surfactant function and oxygen availability.

Structure-function relationships in pulmonary surfactant membranes: from biophysics to therapy

Pulmonary surfactant is an essential lipid-protein complex to maintain an operative respiratory surface at the mammalian lungs. It reduces surface tension at the alveolar air-liquid interface to stabilise the lungs against physical forces operating along the compression-expansion breathing cycles. At the same time, surfactant integrates elements establishing a primary barrier against the entry of pathogens. Lack or deficiencies of the surfactant system are associated with respiratory pathologies, which treatment often includes supplementation with exogenous materials. The present review summarises current models on the molecular mechanisms of surfactant function, with particular emphasis in its biophysical properties to stabilise the lungs and the molecular alterations connecting impaired surfactant with diseased organs. It also provides a perspective on the current surfactant-based strategies to treat respiratory pathologies. This article is part of a Special Issue entitled: Membrane Structure and Function: Relevance in the Cell's Physiology, Pathology and Therapy.

Purification of surfactant protein D (SP-D) from pooled amniotic fluid and bronchoalveolar lavage

Surfactant protein SP-D is a multimeric collagenous lectin, called collectin. SP-D is a multifunctional, pattern recognition innate immune molecule, which binds in a calcium dependent manner to an array of carbohydrates and lipids, thus offering resistance to invading pathogens, allergen challenge, and pulmonary inflammation. SP-D is predominantly found in the endoplasmic reticulum of type 2 pneumocytes and in the secretory granules of Clara or non-ciliated bronchiolar cells. The highest expression of SP-D is observed in the distal airways and alveoli. There is also an extra pulmonary existence of SP-D. The common sources of native full-length human SP-D are bronchoalveolar lavage (BAL) washings from normal or preferably patients suffering from alveolar proteinosis who overproduce SP-D in the lungs. Amniotic fluid collected at the term during parturition is another reasonable source. Here, we describe a simple and rapid method of purifying native SP-D away from SP-A which is also present in the same source. We also describe procedures of expressing and purifying a recombinant fragment of human SP-D (rhSP-D) comprising trimeric neck and carbohydrate recognition domains that has been shown to have therapeutic effects in murine models of allergy and infection.

Experimental lung injury promotes alterations in energy metabolism and respiratory mechanics in the lungs of rats: prevention by exercise

In the present study we investigated the effects of lung injury on energy metabolism (succinate dehydrogenase, complex II, cytochrome c oxidase, and ATP levels), respiratory mechanics (dynamic and static compliance, elastance and respiratory system resistance) in the lungs of rats, as well as on phospholipids in bronchoalveolar lavage fluid. The protective effect of physical exercise on the alterations caused by lung injury, including lung edema was also evaluated. Wistar rats were submitted to 2 months of physical exercise. After this period the lung injury was induced by intratracheal instillation of lipopolysaccharide. Adult Wistar rats were submitted to 2 months of physical exercise and after this period the lung injury was induced by intratracheal instillation of lipopolysaccharide in dose 100 μg/100 g body weight. The sham group received isotonic saline instillation. Twelve hours after the injury was performed the respiratory mechanical and after the rats were decapitated and samples were collected. The rats subjected to lung injury presented a decrease in activities of the enzymes of the electron transport chain and ATP levels in lung, as well as the formation of pulmonary edema. A decreased lung dynamic and static compliance, as well as an increase in respiratory system resistance, and a decrease in phospholipids content were observed. Physical exercise was able to totally prevent the decrease in succinate dehydrogenase and complex II activities and the formation of pulmonary edema. It also partially prevented the increase in respiratory system resistance, but did not prevent the decrease in dynamic and static compliance, as well as in phospholipids content. These findings suggest that the mitochondrial dysfunction may be one of the important contributors to lung damage and that physical exercise may be beneficial in this pathology, although it did not prevent all changes present in lung injury.

Transient exposure of pulmonary surfactant to hyaluronan promotes structural and compositional transformations into a highly active state

Pulmonary surfactant is a lipid-protein complex that lowers surface tension at the respiratory air-liquid interface, stabilizing the lungs against physical forces tending to collapse alveoli. Dysfunction of surfactant is associated with respiratory pathologies such as acute respiratory distress syndrome or meconium aspiration syndrome where naturally occurring surfactant-inhibitory agents such as serum, meconium, or cholesterol reach the lung. We analyzed the effect of hyaluronan (HA) on the structure and surface behavior of pulmonary surfactant to understand the mechanism for HA-promoted surfactant protection in the presence of inhibitory agents. In particular, we found that HA affects structural properties such as the aggregation state of surfactant membranes and the size, distribution, and order/packing of phase-segregated lipid domains. These effects do not require a direct interaction between surfactant complexes and HA and are accompanied by a compositional reorganization of large surfactant complexes that become enriched with saturated phospholipid species. HA-exposed surfactant reaches very high efficiency in terms of rapid and spontaneous adsorption of surfactant phospholipids at the air-liquid interface and shows significantly improved resistance to inactivation by serum or cholesterol. We propose that physical effects pertaining to the formation of a meshwork of interpenetrating HA polymer chains are responsible for the changes in surfactant structure and composition that enhance surfactant function and, thus, resistance to inactivation. The higher resistance of HA-exposed surfactant to inactivation persists even after removal of the polymer, suggesting that transient exposure of surfactant to polymers like HA could be a promising strategy for the production of more efficient therapeutic surfactant preparations.

Interaction of the C-terminal peptide of pulmonary surfactant protein B (SP-B) with a bicellar lipid mixture containing anionic lipid

The hydrophobic lung surfactant SP-B is essential for respiration. SP-B promotes spreading and adsorption of surfactant at the alveolar air-water interface and may facilitate connections between the surface layer and underlying lamellar reservoirs of surfactant material. SP-B_63–78 is a cationic and amphipathic helical peptide containing the C-terminal helix of SP-B. ²H NMR has been used to examine the effect of SP-B_63–78 on the phase behavior and dynamics of bicellar lipid dispersions containing the longer chain phospholipids DMPC-d₅₄ and DMPG and the shorter chain lipid DHPC mixed with a 3∶1∶1 molar ratio. Below the gel-to-liquid crystal phase transition temperature of the longer chain components, bicellar mixtures form small, rapidly reorienting disk-like particles with shorter chain lipid components predominantly found around the highly curved particle edges. With increasing temperature, the particles coalesce into larger magnetically-oriented structures and then into more extended lamellar phases. The susceptibility of bicellar particles to coalescence and large scale reorganization makes them an interesting platform in which to study peptide-induced interactions between lipid assemblies. SP-B_63–78 is found to lower the temperature at which the orientable phase transforms to the more extended lamellar phase. The peptide also changes the spectrum of motions contributing to quadrupole echo decay in the lamellar phase. The way in which the peptide alters interactions between bilayered micelle structures may provide some insight into some aspects of the role of full-length SP-B in maintaining a functional surfactant layer in lungs.

Pulmonary Surfactant and its in vitro Assessment Using Axisymmetric Drop Shape Analysis (ADSA): A Review

Recent progress in the study of pulmonary surfactant is reviewed. The first half of this paper provides general background in both physiological and clinical perspectives. The second half focuses on the in vitro assessment of pulmonary surfactant using methods based on a drop shape technique, Axisymmetric Drop Shape Analysis (ADSA). Theories, experiments, and techniques of image analysis used in these ADSA methods are briefly described. Typical applications of these methods are discussed in detail. It is concluded that the accuracy, versatility, and simplicity of these ADSA methods render them suitable to the study of pulmonary surfactant.

Automatic Adsorptive Isolation and Biophysical and Biochemical Characterization of the Surface Film of Human Bronchoalveolar Lavage Fluid

Lung surfactant is the surface active material of the lung alveoli that makes breathing possible. It consists of various amphiphilic components like phospholipids and surfactant proteins and can be isolated by bronchoalveolar lavage from the lungs. The function of the surfactant system of the lungs is dominated by the composition of the surface film. It is therefore highly probable that alterations of the lung surfactant in lung diseases are mostly reflected in the surface film of bronchoalveolar lavage fluid. The aim of the study was to investigate the possibility of isolating the native surface film of bronchoalveolar lavage (BAL) fluid with the high-performance surfactant purification apparatus HPS 1 from the technical as well as from the theoretical point of view.

Basically this method represents a technique for the high-performance purification of ordinary surfactants to remove surface-active impurities and to achieve “surface-chemically” pure solutions. After adsorption from bulk BAL fluid (within 30 min) and subsequent compression of the adsorbed layer (by an surface area ratio of 1 to 30) the adsorbed layer was aspirated (one cycle) and the aspirated solution collected. This procedure was repeated for 100 and 200 times. The collected fractions of the aspirated solutions (after 100 and 200 cycles), the original BAL fluid pool and the residual bulk phase were analysed for the total protein, total phospholipids and phospholipid subclasses. In addition, the dynamic surface tension of the solutions was measured. Generally, there was an increase of the protein and the phospholipid concentrations in the aspirated fractions by a factor 2 to 3 in comparison to the corresponding concentrations of the BAL fluid. Analysis of the phospholipid subclasses shows that the aspirated solutions, i. e. the surface film, contains phosphatidylcholine, phosphatidylglycerol and phosphatidylinositol. Phosphatidylethanolamine was not detected in the surface film. The percentage of phoshatidylglycerol in the surface film (100 cycles) was noticeably increased by 11.4% and 7.0%, respectively, in comparison to that of the BAL fluid. The equilibrium surface tension values of the aspirated solutions amounted to 37.5 and/or 40.3 mN/m (lavage fluid 1) and 38.6 and/or 40.2 mN/m (lavage fluid 2). The results prove that proteins and different phospholipids are integral parts of the surface film of BAL fluid and that this technique provides a new advantageous possibility for the isolation of native lung surfactant.