1
|
Conner AA, David D, Yim EKF. The Effects of Biomimetic Surface Topography on Vascular Cells: Implications for Vascular Conduits. Adv Healthc Mater 2024:e2400335. [PMID: 38935920 DOI: 10.1002/adhm.202400335] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2024] [Revised: 06/04/2024] [Indexed: 06/29/2024]
Abstract
Cardiovascular diseases (CVDs) are the leading cause of mortality worldwide and represent a pressing clinical need. Vascular occlusions are the predominant cause of CVD and necessitate surgical interventions such as bypass graft surgery to replace the damaged or obstructed blood vessel with a synthetic conduit. Synthetic small-diameter vascular grafts (sSDVGs) are desired to bypass blood vessels with an inner diameter <6 mm yet have limited use due to unacceptable patency rates. The incorporation of biophysical cues such as topography onto the sSDVG biointerface can be used to mimic the cellular microenvironment and improve outcomes. In this review, the utility of surface topography in sSDVG design is discussed. First, the primary challenges that sSDVGs face and the rationale for utilizing biomimetic topography are introduced. The current literature surrounding the effects of topographical cues on vascular cell behavior in vitro is reviewed, providing insight into which features are optimal for application in sSDVGs. The results of studies that have utilized topographically-enhanced sSDVGs in vivo are evaluated. Current challenges and barriers to clinical translation are discussed. Based on the wealth of evidence detailed here, substrate topography offers enormous potential to improve the outcome of sSDVGs and provide therapeutic solutions for CVDs.
Collapse
Affiliation(s)
- Abigail A Conner
- Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
| | - Dency David
- Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
| | - Evelyn K F Yim
- Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
- Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
- Center for Biotechnology and Bioengineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
| |
Collapse
|
2
|
Da Costa ADS, Subbiah R, Oh SJ, Jeong H, Na JI, Park K, Choi IS, Shin JH. Fibroblasts Close a Void in Free Space by a Purse-String Mechanism. ACS APPLIED MATERIALS & INTERFACES 2022; 14:40522-40534. [PMID: 36036800 DOI: 10.1021/acsami.2c07952] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The mechanism by which stromal cells fill voids in injured tissue remains a fundamental question in regenerative medicine. While it is well-established that fibroblasts fill voids by depositing extracellular matrix (ECM) proteins as they migrate toward the wound site, little is known about their ability to adopt an epithelial-like purse-string behavior. To investigate fibroblast behavior during gap closure, we created an artificial wound with a large void space. We discovered that fibroblasts could form a free-standing bridge over deep microvoids, closing the void via purse-string contraction, a mechanism previously thought to be unique to epithelial wound closure. The findings also revealed that myosin II mediated contractility and intercellular adherent junctions were required for the closure of the fibroblast gap in our fabricated three-dimensional artificial wound. To fulfill their repair function under the specific microenvironmental conditions of wounds, fibroblasts appeared to acquire the structural features of epithelial cells, namely, contractile actin bundles that span over multiple cells along the boundary. These findings shed light on a novel mechanism by which stromal cells bridge the 3D gap during physiological processes such as morphogenesis and wound healing.
Collapse
Affiliation(s)
- Avelino Dos Santos Da Costa
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Bio-Medical Science and Technology, KIST School, University of Science and Technology (UST), Seoul 02792, Republic of Korea
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| | - Ramesh Subbiah
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Biomaterials and Biomechanics, Department of Restorative Dentistry, School of Dentistry, Oregon Health and Science University (OHSU), Portland, Oregon 97201, United States
| | - Seung Ja Oh
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Bio-Medical Science and Technology, KIST School, University of Science and Technology (UST), Seoul 02792, Republic of Korea
| | - Hyuntae Jeong
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Jung-Im Na
- Department of Dermatology, Seoul National University Bundang Hospital, Seongnam 13620, Republic of Korea
| | - Kwideok Park
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Bio-Medical Science and Technology, KIST School, University of Science and Technology (UST), Seoul 02792, Republic of Korea
| | - In-Suk Choi
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| | - Jennifer H Shin
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
3
|
Martinez MAF, Balderrama ÍDF, Karam PSBH, de Oliveira RC, de Oliveira FA, Grandini CR, Vicente FB, Stavropoulos A, Zangrando MSR, Sant'Ana ACP. Surface roughness of titanium disks influences the adhesion, proliferation and differentiation of osteogenic properties derived from human. Int J Implant Dent 2020; 6:46. [PMID: 32839885 PMCID: PMC7445212 DOI: 10.1186/s40729-020-00243-5] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2020] [Accepted: 07/02/2020] [Indexed: 01/02/2023] Open
Abstract
PURPOSE The aim of this study was to investigate the response of osteogenic cell lineage and gingival fibroblastic cells to different surface treatments of grade IV commercially pure Titanium (cpTi) disks. MATERIAL AND METHODS Grade IV cpTi disks with different surfaces were produced: machined (M), sandblasting (B), sandblasting and acid subtraction (NP), and hydrophilic treatment (ACQ). Surface microtopography characteristics and chemical composition were investigated by scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS). Adhesion and proliferation of SC-EHAD (human surgically-created early healing alveolar defects) and HGF-1 (human gingival fibroblasts) on Ti disks were investigated at 24 and 48 h, and osteogenic differentiation and mineralization were evaluated by assessing alkaline phosphatase (ALP) activity and alizarin red staining, respectively. RESULTS No significant differences were found among the various surface treatments for all surface roughness parameters, except for skewness of the assessed profile (Rsk) favoring M (p = 0.035 ANOVA). M disks showed a slightly higher (p > 0.05; Kruskal-Wallis/Dunn) adhesion of HGF-1 (89.43 ± 9.13%) than SC-EHAD cells (57.11 ± 17.72%). ACQ showed a significantly higher percentage of SC-EHAD (100%) than HGF-1 (69.67 ± 13.97%) cells adhered at 24 h. SC-EHAD cells expressed increased ALP activity in osteogenic medium at M (213%) and NP (235.04%) surfaces, but higher mineralization activity on ACQ (54.94 ± 4.80%) at 14 days. CONCLUSION These findings suggest that surface treatment influences the chemical composition and the adhesion and differentiation of osteogenic cells in vitro. CLINICAL RELEVANCE Hydrophilic surface treatment of grade IV cpTi disks influences osteogenic cell adhesion and differentiation, which might enhance osseointegration.
Collapse
Affiliation(s)
- Maria Alejandra Frias Martinez
- Department of Prosthodontics and Periodontics, Discipline of Periodontics, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, 17012-901, Brazil
| | - Ísis de Fátima Balderrama
- Department of Prosthodontics and Periodontics, Discipline of Periodontics, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, 17012-901, Brazil.
- Department of Periodontology, Faculty of Odontology, Malmö University, Malmö, Sweden.
| | - Paula Stephania Brandão Hage Karam
- Department of Prosthodontics and Periodontics, Discipline of Periodontics, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, 17012-901, Brazil
| | | | - Flávia Amadeu de Oliveira
- Department of Biological Sciences, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, Brazil
| | | | - Fábio Bossoi Vicente
- Anelasticity and Biomaterials Laboratory, São Paulo State University, Bauru, SP, Brazil
| | - Andreas Stavropoulos
- Department of Periodontology, Faculty of Odontology, Malmö University, Malmö, Sweden
| | - Mariana Schutzer Ragghianti Zangrando
- Department of Prosthodontics and Periodontics, Discipline of Periodontics, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, 17012-901, Brazil
| | - Adriana Campos Passanezi Sant'Ana
- Department of Prosthodontics and Periodontics, Discipline of Periodontics, School of Dentistry at Bauru, University of São Paulo, Bauru, SP, 17012-901, Brazil
| |
Collapse
|
4
|
The Surface Anodization of Titanium Dental Implants Improves Blood Clot Formation Followed by Osseointegration. COATINGS 2018. [DOI: 10.3390/coatings8070252] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The anodization of titanium dental implant influences the biologic processes of osseointegration. 34 grit-blasted and acid-etched titanium specimens were used to evaluate micro- and nano-roughness (Ra), contact angle (θ) and blood clot extension (bce). 17 samples were anodized (test) while the remaining were used as control. The bce, was measured using 10 µL of human blood left in contact with titanium for 5 min at room temperature. The micro- and nano-scale Ra were measured under CLSM and AFM, respectively, while the θ was analyzed using the sessile drop technique. The bone-implant contact (BIC) rate was measured on two narrow implants retrieved for fracture. bce was 42.5 (±22) for test and 26.6% (±13)% for control group (p = 0.049). The micro-Ra was 6.0 (±1.5) for the test and 5.8 (±1.8) µm for control group (p > 0.05). The θ was 98.5° (±18.7°) for test and 103° (±15.2°) for control group (p > 0.05). The nano-Ra was 286 (±40) for the test and 226 (±40) nm for control group (p < 0.05). The BIC rate was 52.5 (±2.1) for test and 34.5% (±2.1%) for control implant (p = 0.014). (Conclusions) The titanium anodized surface significantly increases blood clot retention, significantly increases nano-roughness, and favors osseointegration. When placing dental implants in poor bone quality sites or with immediate loading protocol anodized Ti6Al4V dental implants should be preferred.
Collapse
|
5
|
In Vitro Behavior of Osteoblasts on Zirconia After Different Intensities of Erbium, Chromium-Doped. J Craniofac Surg 2016; 27:784-8. [DOI: 10.1097/scs.0000000000002429] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
|
6
|
Baker RM, Brasch ME, Manning ML, Henderson JH. Automated, contour-based tracking and analysis of cell behaviour over long time scales in environments of varying complexity and cell density. J R Soc Interface 2015; 11:20140386. [PMID: 24920119 DOI: 10.1098/rsif.2014.0386] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022] Open
Abstract
Understanding single and collective cell motility in model environments is foundational to many current research efforts in biology and bioengineering. To elucidate subtle differences in cell behaviour despite cell-to-cell variability, we introduce an algorithm for tracking large numbers of cells for long time periods and present a set of physics-based metrics that quantify differences in cell trajectories. Our algorithm, termed automated contour-based tracking for in vitro environments (ACTIVE), was designed for adherent cell populations subject to nuclear staining or transfection. ACTIVE is distinct from existing tracking software because it accommodates both variability in image intensity and multi-cell interactions, such as divisions and occlusions. When applied to low-contrast images from live-cell experiments, ACTIVE reduced error in analysing cell occlusion events by as much as 43% compared with a benchmark-tracking program while simultaneously tracking cell divisions and resulting daughter-daughter cell relationships. The large dataset generated by ACTIVE allowed us to develop metrics that capture subtle differences between cell trajectories on different substrates. We present cell motility data for thousands of cells studied at varying densities on shape-memory-polymer-based nanotopographies and identify several quantitative differences, including an unanticipated difference between two 'control' substrates. We expect that ACTIVE will be immediately useful to researchers who require accurate, long-time-scale motility data for many cells.
Collapse
Affiliation(s)
- Richard M Baker
- Department of Biomedical and Chemical Engineering, Syracuse University, Syracuse, NY 13244, USA Syracuse Biomaterials Institute, Syracuse University, Syracuse, NY 13244, USA
| | - Megan E Brasch
- Department of Biomedical and Chemical Engineering, Syracuse University, Syracuse, NY 13244, USA Syracuse Biomaterials Institute, Syracuse University, Syracuse, NY 13244, USA
| | - M Lisa Manning
- Syracuse Biomaterials Institute, Syracuse University, Syracuse, NY 13244, USA Department of Physics, Syracuse University, Syracuse, NY 13244, USA
| | - James H Henderson
- Department of Biomedical and Chemical Engineering, Syracuse University, Syracuse, NY 13244, USA Syracuse Biomaterials Institute, Syracuse University, Syracuse, NY 13244, USA
| |
Collapse
|
7
|
Synthesis, Characterizations and Biocompatibility of Novel Block Polyurethanes Based on Poly(lactic acid) (PLA) and Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P3/4HB). J Inorg Organomet Polym Mater 2014. [DOI: 10.1007/s10904-014-0081-5] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
8
|
Barthes J, Özçelik H, Hindié M, Ndreu-Halili A, Hasan A, Vrana NE. Cell microenvironment engineering and monitoring for tissue engineering and regenerative medicine: the recent advances. BIOMED RESEARCH INTERNATIONAL 2014; 2014:921905. [PMID: 25143954 PMCID: PMC4124711 DOI: 10.1155/2014/921905] [Citation(s) in RCA: 133] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/23/2014] [Accepted: 06/15/2014] [Indexed: 01/01/2023]
Abstract
In tissue engineering and regenerative medicine, the conditions in the immediate vicinity of the cells have a direct effect on cells' behaviour and subsequently on clinical outcomes. Physical, chemical, and biological control of cell microenvironment are of crucial importance for the ability to direct and control cell behaviour in 3-dimensional tissue engineering scaffolds spatially and temporally. In this review, we will focus on the different aspects of cell microenvironment such as surface micro-, nanotopography, extracellular matrix composition and distribution, controlled release of soluble factors, and mechanical stress/strain conditions and how these aspects and their interactions can be used to achieve a higher degree of control over cellular activities. The effect of these parameters on the cellular behaviour within tissue engineering context is discussed and how these parameters are used to develop engineered tissues is elaborated. Also, recent techniques developed for the monitoring of the cell microenvironment in vitro and in vivo are reviewed, together with recent tissue engineering applications where the control of cell microenvironment has been exploited. Cell microenvironment engineering and monitoring are crucial parts of tissue engineering efforts and systems which utilize different components of the cell microenvironment simultaneously can provide more functional engineered tissues in the near future.
Collapse
Affiliation(s)
- Julien Barthes
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
| | - Hayriye Özçelik
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
| | - Mathilde Hindié
- Equipe de Recherche sur les Relations Matrice Extracellulaire-Cellules, Université de Cergy-Pontoise, 2 Avenue Adolphe Chauvin, 95302 Cergy Pontoise, France
| | | | - Anwarul Hasan
- Biomedical Engineering and Department of Mechanical Engineering, American University of Beirut, Beirut 1107 2020, Lebanon
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Nihal Engin Vrana
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
- Protip SAS, 8 Place de l'Hôpital, 67000, Strasbourg, France
| |
Collapse
|
9
|
Thrivikraman G, Mallik PK, Basu B. Substrate conductivity dependent modulation of cell proliferation and differentiation in vitro. Biomaterials 2013; 34:7073-85. [DOI: 10.1016/j.biomaterials.2013.05.076] [Citation(s) in RCA: 64] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2013] [Accepted: 05/29/2013] [Indexed: 11/26/2022]
|
10
|
Lei Y, Zouani OF, Rami L, Chanseau C, Durrieu MC. Modulation of lumen formation by microgeometrical bioactive cues and migration mode of actin machinery. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2013; 9:1086-1095. [PMID: 23161822 DOI: 10.1002/smll.201202410] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2012] [Indexed: 06/01/2023]
Abstract
How endothelial cells (ECs) express the particular filopodial or lamellipodial form of the actin machinery is critical to understanding EC functions such as angiogenesis and sprouting. It is not known how these mechanisms coordinately promote lumen formation of ECs. Here, adhesion molecules (RGD peptides) and inductor molecules (BMP-2 mimetic peptides) are micropatterned onto polymer surfaces by a photolithographic technique to induce filopodial and lamellipodial migration modes. Firstly, the effects of peptide microgeometrical distribution on EC adhesion, orientation and morphogenesis are evaluated. Large micropatterns (100 μm) promote EC orientation without lumen formation, whereas small micropatterns (10-50 μm) elicit a collective cell organization and induce EC lumen formation, in the case of RGD peptides. Secondly, the correlation between EC actin machinery expression and EC self-assembly into lumen formation is addressed. Only the filopodial migration mode (mimicked by RGD) but not lamellipodial migration mode (mimicked by BMP-2) promotes EC lumen formation. This work gives a new concept for the design of biomaterials for tissue engineering and may provide new insight for angiogenesis inhibition on tumors.
Collapse
Affiliation(s)
- Yifeng Lei
- Université Bordeaux 1-CNRS, UMR5248, Institut Européen de Chimie et Biologie, 2 rue Robert Escarpit, Pessac, France.
| | | | | | | | | |
Collapse
|
11
|
Traini T, Caputi S, Gherlone E, Degidi M, Piattelli A. Fibrin clot extension on zirconia surface for dental implants: a quantitative in vitro study. Clin Implant Dent Relat Res 2013; 16:718-27. [PMID: 23311680 DOI: 10.1111/cid.12038] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
PURPOSE The surface chemical and physical properties of materials used for implants have a major influence on blood clot organization. This study aims to evaluate the blood clot extension (bce) on zirconia and titanium. bce was measured in association to surface roughness (Ra) and static contact angle (θ). MATERIALS AND METHODS Forty disk-shaped samples of sandblasted yttria tetragonal zirconia polycrystal (sb-YTZP), machined titanium (m-Ti), and sandblasted, high-temperature, acid-etched titanium (p-Ti) were used in the present study. About 0.2 mL of human blood, immediately dropped onto the specimen's surface and left in contact for 5 minutes at room temperature, was used to measure the bce. Specimens were observed under confocal scanning laser and scanning electron microscopes. RESULTS The bce (mean × 10(7) ± standard deviation [SD] × 10(6) μm(2) ) was 2.97 ± 6.68 for m-Ti, 5.64 ± 6.83 for p-Ti, and 3.61 ± 7.67 for sb-YTZP. p-Ti samples showed a significantly higher bce. Ra (mean ± SD [μm]) was 0.56 ± 0.7 for m-Ti, 3.78 ± 0.8 for p-Ti, and 2.68 ± 0.6 for sb-YTZP. The difference was not significant between sb-YTZP and p-Ti. θ (mean ± SD) was 55.6 ± 5.6 for m-Ti, 48.7 ± 2.8 for sb-YTZP, and 38.0 ± 2.2 for p-Ti. The difference was not significant between m-Ti and sb-YTZP. CONCLUSIONS The sb-YTZP demonstrated a significantly lesser amount of bce compared with p-Ti specimens, notwithstanding that any significant difference was present between Ra and θ.
Collapse
Affiliation(s)
- Tonino Traini
- Department of Medical, Oral and Biotechnological Sciences, University of Chieti-Pescara, Chieti-Pescara, Italy; Department of Dentistry, San Raffaele Hospital, Vita Salute University, Milano, Italy
| | | | | | | | | |
Collapse
|
12
|
Chollet C, Bareille R, Rémy M, Guignandon A, Bordenave L, Laroche G, Durrieu MC. Impact of Peptide Micropatterning on Endothelial Cell Actin Remodeling for Cell Alignment under Shear Stress. Macromol Biosci 2012; 12:1648-59. [DOI: 10.1002/mabi.201200167] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2012] [Revised: 07/06/2012] [Indexed: 01/29/2023]
|
13
|
Chemical imaging of cardiac cell and tissue by using secondary ion mass spectrometry. Mol Imaging Biol 2012; 13:1067-76. [PMID: 21161688 DOI: 10.1007/s11307-010-0460-4] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Abstract
PURPOSE Identification and localization of biomolecules in cells and tissue samples are important for understanding of subcellular structures and can be helpful in biomedical and pharmaceutical research. PROCEDURES Isolated cardiac cells and tissue of rats are studied by using time-of-flight secondary ion mass spectrometry. This technique provides chemical composition of cardiac cell membrane and tissue surface in native form. RESULTS The result is a spatially resolved chemical imaging of cell and tissue surfaces as a lateral distribution of biologically relevant molecules-phospholipids, along with fatty acids, and cholesterol. Phospholipids are represented by phosphatidylcholine and cardiolipin molecules and their fragments. Phosphatidylcholine polar head group at mass of 184.1 u has an origin in the cell membrane, and a two-dimensional distribution of this fragment provides clear chemical contours of the cell. The high-resolution contrast of the cell is observed within its environment represented with Na(+) ions. Images of PO(4)H(-) fragment and fatty acids with 16 or 18 C atoms are determined in cardiac tissue. Distributions of these 16 and 18 C fatty acids are the same within their groups, and interestingly, these two distribution groups are spatially complementary. Contours of phosphatidylcholine and cardiolipin fragments are also complementary, the distributions of 16 C fatty acids and phosphatidylcholine are identical, and the distributions of 18 C fatty acids and cardiolipin are also the same. This complementarity thus supports the chemical compositions of phosphatidylcholine and cardiolipin based on 16 C and 18 C fatty acids, respectively. CONCLUSION The method provides information not only about cell and tissue morphology, shape, and condition but also about cellular membrane chemical composition and lateral distribution of biologically relevant molecules.
Collapse
|
14
|
Baran ET, Tuzlakoğlu K, Salgado A, Reis RL. Microchannel-patterned and heparin micro-contact-printed biodegradable composite membranes for tissue-engineering applications. J Tissue Eng Regen Med 2010; 5:e108-14. [DOI: 10.1002/term.368] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2010] [Accepted: 08/30/2010] [Indexed: 11/10/2022]
|
15
|
Liu ZM, Gu QY, Barry A, Xu ZK, Groth T. Biogenic Polyelectrolyte Multilayers on Poly(L-lactide) Films for Control of Osteoblast Adhesion. ACTA ACUST UNITED AC 2010. [DOI: 10.1002/masy.201050812] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
16
|
Gan J, Chen H, Zhou F, Huang H, Zheng J, Song W, Yuan L, Wu Z. Fabrication of cell pattern on poly(dimethylsiloxane) by vacuum ultraviolet lithography. Colloids Surf B Biointerfaces 2010; 76:381-5. [DOI: 10.1016/j.colsurfb.2009.11.013] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2009] [Revised: 10/22/2009] [Accepted: 11/13/2009] [Indexed: 10/20/2022]
|
17
|
|
18
|
Van Vlierberghe S, De Wael K, Buschop H, Adriaens A, Schacht E, Dubruel P. Ozonization and cyclic voltammetry as efficient methods for the regeneration of gelatin-coated SPR chips. Macromol Biosci 2009; 8:1090-7. [PMID: 18655031 DOI: 10.1002/mabi.200800074] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
The application of ozonization and cyclic voltammetry for the regeneration of gold chips containing a chemisorbed gelatin layer is reported. The efficiency of the regeneration process was analyzed using various surface analysis techniques indicating a complete removal of the biopolymer layer. The current findings open up perspectives for regeneration and multiple application of gold chips for SPR measurements.
Collapse
|
19
|
Choong C, Griffiths JP, Moloney MG, Triffitt J, Swallow D. Direct introduction of phosphonate by the surface modification of polymers enhances biocompatibility. REACT FUNCT POLYM 2009. [DOI: 10.1016/j.reactfunctpolym.2008.11.003] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
20
|
Abstract
Two UV-curable polymers, i.e., a star-shaped poly(ethylene glycol) (PEG) and a linear perfluorinated polyether (PFPE), are investigated as novel biomaterials in a systematic study of the cellular responses to surface chemistry, topography, and elasticity. Based on the wettability it was expected that the two novel biomaterials were too hydrophilic or -phobic, respectively, to support cell adhesion. Indeed, no cell adhesion was observed on the smooth, unstructured elastomers, whereas the materials showed no cytotoxicity. However, when the materials bear defined, topographic patterns (prepared by UV-based imprinting), cells do react strongly to the surfaces; they adhere, spread, and change their shape depending on the geometry of the features. Typically, cells were found to align along line patterns and "float" on pillar structures. It should be noted that the chemistry of the surface is not altered by the imprinting process, hence, there are no biofunctional molecules present at the surface to aid the cell adhesion. Finally, a remarkable effect of elasticity on the cellular behavior was discovered. Thus, the three parameters of chemistry, topography, and elasticity were investigated in- and interdependently, and it was found that the biomaterials may lose their resistance to protein adsorption and cell adhesion depending on the surface topography.
Collapse
|
21
|
Olson DA, Gratton SEA, DeSimone JM, Sheares VV. Amorphous linear aliphatic polyesters for the facile preparation of tunable rapidly degrading elastomeric devices and delivery vectors. J Am Chem Soc 2007; 128:13625-33. [PMID: 17031977 DOI: 10.1021/ja063092m] [Citation(s) in RCA: 61] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
A versatile method for preparing amorphous degradable elastomers with tunable properties that can be easily fabricated into a wide variety of shape-specific devices was investigated. Completely amorphous, liquid poly(ester ether) prepolymers with number-average molecular weights between 4 and 6 x 10(3) g/mol were prepared via condensation polymerization. These liquid prepolymers were then thermally cross-linked to form degradable elastomeric structures. The ability to vary the composition of these liquid prepolymers allows for easy control of the mechanical and degradation properties of the resulting elastomeric structures. Materials can be designed to completely degrade in vitro over a range of 30 days to 6 months, while the Young's modulus can be varied over 3 orders of magnitude (G = 0.02-20 MPa). Also, the liquid nature of these prepolymers makes them amenable to a wide variety of fabrication techniques. Using traditional and modified imprint lithography techniques, we have fabricated devices that demonstrate a wide variety of biologically applicable topologies, which could easily be extended to fabricate devices with more complex geometries. Until now, no method has combined this ease and speed of fabrication with the ability to control the mechanical and degradation properties of the resulting elastomers over such a broad range.
Collapse
Affiliation(s)
- David A Olson
- Department of Chemistry, University of North Carolina at Chapel Hill, Venable Hall CB 3290, Chapel Hill, NC 27599-3290, USA
| | | | | | | |
Collapse
|
22
|
Lensen MC, Mela P, Mourran A, Groll J, Heuts J, Rong H, Möller M. Micro- and nanopatterned star poly(ethylene glycol) (PEG) materials prepared by UV-based imprint lithography. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2007; 23:7841-6. [PMID: 17547436 DOI: 10.1021/la7007683] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
A UV-based imprint lithography method is used for the direct surface structuring of hydrogel-based biomaterials, which are prepared from a family of tailor-made star poly(ethylene glycol) formulations. Bulk star poly(ethylene glycol) (PEG) hydrogels are fabricated by cross-linking acrylate-functionalized star PEG macromolecules. Cross-linking is achieved by radical reactions initiated by UV irradiation. This UV-curable star PEG formulation allows templating of mold structures to yield a stable, stand-alone, elastomeric replica of the mold. In particular, when a secondary, soft mold is used that consists of a perfluorinated elastomer with inherent excellent release properties, nanometer-sized features (down to 100 nm) can be imprinted without specialized equipment. The applied UV-based imprint lithography is a fast and simple technique to employ for the direct topographic structuring of bulk PEG-based biomaterials. The UV-based imprinting into the star PEG prepolymer by means of a perfluorinated, soft mold can be carried out on the bench top, while nanoscale resolution is demonstrated.
Collapse
Affiliation(s)
- Marga C Lensen
- DWI e.V. and Institute of Technical and Macromolecular Chemistry, RWTH Aachen, Pauwelsstrasse 8, D-52056 Aachen, Germany
| | | | | | | | | | | | | |
Collapse
|
23
|
Shaikh-Mohammed J, DeCoster MA, McShane MJ. Cell adhesion testing using novel testbeds containing micropatterns of complex nanoengineered multilayer films. CONFERENCE PROCEEDINGS : ... ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL CONFERENCE 2007; 2004:2671-4. [PMID: 17270826 DOI: 10.1109/iembs.2004.1403767] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Methods for producing biomaterial patterns with defined spatial distribution micro- and nano-scale features are important for studying the cellular-level interactions, including basic cell-to-material and cell-to-cell communications. This work reports on the fabrication of substrates to study cell adhesion to multicomponent micropatterns of multilayer films by coupling conventional photolithography and LbL techniques, known as the L-LbL technique. Toward this end, substrates with nanofilm micropatterns of two different bio-functionalities have been fabricated for sPLA/sub 2/ and PLL and were used for in vitro cell-culture studies using neurons, which exhibited preferential and high efficiency and selective adhesion to sPLA/sub 2/ nanofilms. These results support the immediate use of multicomponent micropatterns as biological testbeds for basic studies of cells, and provide a basis for further expansions of the fabrication processes to produce scaffolds for precise definition of cell-to-material and cell-to-cell interactions, such that the resulting constructs mimic in vivo cell organization and behavior.
Collapse
|
24
|
Welle A, Chiumiento A, Barbucci R. Competitive protein adsorption on micro patterned polymeric biomaterials, and viscoelastic properties of tailor made extracellular matrices. ACTA ACUST UNITED AC 2007; 24:87-91. [PMID: 16861035 DOI: 10.1016/j.bioeng.2006.05.027] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Cell adhesion on biomaterial surfaces and the vitality of anchorage dependent cells is affected by several parameters of an adsorbate layer which is intentionally or spontaneously formed. Surface pre-treatments and several conditioning steps prior and during to the cell/biomaterial contact affect the composition, orientation, quantity and viscoelasticity of the interfacing layer between cells and biomaterial. This work was performed to elucidate the response of cells on two modified biomaterial surfaces based on protein or carbohydrate adsorbates: (a) Masked UV irradiations opened a simple route to obtain chemically patterned substrates controlling serum protein adsorption and cell adhesion. It is possible to achieve structures of subcellular size and to produce immobilized gradients. In order to examine the protein matrix deposited on these substrates we applied a quartz microbalance technique (QCM-D) capable to extract viscoelastic data in addition to the mass uptake during plasma protein deposition. It was found that the quantity and viscosity of surface bound albumin is lowered when the surface is modified (patterned) by UV exposure. Hence, the UV modification promotes the competitive adsorption of cell adhesion proteins from the media or upon secretion by the cells and yields to the observed cell patterns. (b) Another tissue engineering technique, using immobilized, modified and/or cross linked hyaluronic acid (HA), an important extra cellular matrix component in vivo, is also examined by QCM-D. Our data demonstrate that HA can be modified by an activation with a carbodiimide, followed by the application of an alpha,omega-bisamino polyethyleneglycol. The QCM-D data can be interpreted as a stiffening of the HA layer combined with the release of hydration water. Further, the hydration state and the viscoelastic behaviour of surface bound ultrathin HA hydrogels was examined. Quantification of viscoelastic parameters of thin films of ECM by QCM-D is valuable for the interpretation of durotaxis, describing effects of mechanical substrate parameters on the adhesion and motility of cells.
Collapse
Affiliation(s)
- Alexander Welle
- Institute for Biological Interfaces, Forschungszentrum Karlsruhe, P.O. Box 3640, 76021 Karlsruhe, Germany.
| | | | | |
Collapse
|
25
|
Organization of mesenchymal stem cells is controlled by micropatterned silicon substrates. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2007. [DOI: 10.1016/j.msec.2006.03.005] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
26
|
Pyo N, Tanaka S, McNamee CE, Kanda Y, Fukumori Y, Ichikawa H, Higashitani K. Effect of the cell type and cell density on the binding of living cells to a silica particle: An atomic force microscope study. Colloids Surf B Biointerfaces 2006; 53:278-87. [PMID: 17098400 DOI: 10.1016/j.colsurfb.2006.09.020] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2006] [Revised: 09/01/2006] [Accepted: 09/26/2006] [Indexed: 10/24/2022]
Abstract
We used the atomic force microscope to study how the cell type and the density of cells adsorbed at a substrate can affect the adhesion between a living cell and a model drug delivery system (DDS) carrier nano-particle. We used three different anchorage-dependent cells, i.e., a living mouse fibroblast cell (L929), a living human colon cancer cell (Caco2), and a living mouse malignant melanoma cell (B16F10). For the DDS model nano-particle, we used a silica colloid. In order to correlate the adhesion force with the cell types, the growth curve of the cells were determined with a haemocytometer. The shapes of the cells at the different stages were monitored by light microscopy, and the morphology of their surfaces obtained by tapping mode atomic force microscopy. Force measurements showed that the Caco2 cell bound little to a silica particle, regardless of the cell density. The L929 cell bound well to a silica particle for low and high cell densities. The B16F10 cell bound little to a silica particle for low cell densities, but bound well for high cell densities. AFM images showed that the L929 cell did not contain folds. The B16F10 cells, however, displayed folds in the cell surface for low cell densities, but no folds in the cell for high cell densities. As literature also reported that the Caco2 cell contains folds, these results suggested that cells with folds showed less adhesion to a silica particle than cells without folds. The presence of folds in the cell presumably decreased the number of sites on the cell that could hydrogen bond or undergo van der Waals binding with the silanol groups of the silica particle.
Collapse
Affiliation(s)
- Nayoung Pyo
- Department of Chemical Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8510, Japan
| | | | | | | | | | | | | |
Collapse
|
27
|
Charest JL, Eliason MT, García AJ, King WP. Combined microscale mechanical topography and chemical patterns on polymer cell culture substrates. Biomaterials 2006; 27:2487-94. [PMID: 16325902 DOI: 10.1016/j.biomaterials.2005.11.022] [Citation(s) in RCA: 140] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2005] [Accepted: 11/09/2005] [Indexed: 11/15/2022]
Abstract
This paper presents a technique to independently form mechanical topography and surface chemical patterns on polymer cell substrates, and studies the response of osteoblast cells to these surface patterns. The patterns were formed in two separate steps: hot embossing imprint lithography formed the mechanical topography and microcontact printing created the chemical pattern. The resulting substrate had surface features consisting of embossed grooves 4 microm deep and 8 microm wide spaced by 16 microm wide mesas and microcontact printed adhesive lanes 10 microm wide with spacings that ranged from 10 to 100 microm. When presented with either mechanical topography or chemical patterns alone, the cells significantly aligned to the pattern presented. When presented with mechanical topography overlaid with an orthogonal chemical pattern, the cells aligned to the mechanical topography. As the chemical pattern spacing was increased, osteoblasts remained aligned to the mechanical topography. Unlike traditional microfabrication approaches based on photolithography and wet chemistry, the patterning technique presented is compatible with a large number of biomaterials, could form patterns with features much smaller than 1 microm, and is highly scalable to large substrates.
Collapse
Affiliation(s)
- Joseph L Charest
- Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 771 Ferst Drive NW, Atlanta, GA 30332-0405, USA
| | | | | | | |
Collapse
|
28
|
Shaikh Mohammed J, Decoster MA, McShane MJ. Fabrication of interdigitated micropatterns of self-assembled polymer nanofilms containing cell-adhesive materials. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2006; 22:2738-46. [PMID: 16519477 PMCID: PMC2536648 DOI: 10.1021/la0525473] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Micropatterns of different biomaterials with micro- and nanoscale features and defined spatial arrangement on a single substrate are useful tools for studying cellular-level interactions, and recent reports have highlighted the strong influence of scaffold compliance in determining cell behavior. In this paper, a simple yet versatile and precise patterning technique for the fabrication of interdigitated micropatterns of nanocomposite multilayer coatings on a single substrate is demonstrated through a combination of lithography and layer-by-layer (LbL) assembly processes, termed polymer surface micromachining (PSM). The first nanofilm pattern is constructed using lithography, followed by LbL multilayer assembly and lift-off, and the process is repeated with optical alignment to obtain interdigitated patterns on the same substrate. Thus, the method is analogous to surface micromachining, except that the deposition materials are polymers and biological materials that are used to produce multilayer nanocomposite structures. A key feature of the multilayers is the capability to tune properties such as stiffness by appropriate selection of materials, deposition conditions, and postdeposition treatments. Two- and four-component systems on glass coverslips are presented to demonstrate the versatility of the approach to construct precisely defined, homogeneous nanofilm patterns. In addition, an example of a complex system used as a testbed for in vitro cell adhesion and growth is provided: micropatterns of poly(sodium 4-styrenesulfonate)/poly-L-lysine hydrobromide (PSS/PLL) and secreted phospholipase A(2)/poly(ethyleneimine) (sPLA(2)/PEI) multilayers. The interdigitated square nanofilm array patterns were obtained on a single coverslip with poly(diallyldimethylammonium chloride) (PDDA) as a cell-repellent background. Cell culture experiments show that cortical neurons respond and bind specifically to the sPLA(2) micropatterns in competition with PLL micropatterns. The fabrication and the initial biological results on the nanofilm micropatterns support the usefulness of this technique for use in studies aimed at elucidating important biological structure-function relationships, but the applicability of the fabrication method is much broader and may impact electronics, photonics, and chemical microsystems.
Collapse
Affiliation(s)
- Javeed Shaikh Mohammed
- Institute for Micromanufacturing, Louisiana Tech University, Ruston, Louisiana 71272, USA
| | | | | |
Collapse
|
29
|
Carman ML, Estes TG, Feinberg AW, Schumacher JF, Wilkerson W, Wilson LH, Callow ME, Callow JA, Brennan AB. Engineered antifouling microtopographies--correlating wettability with cell attachment. BIOFOULING 2006; 22:11-21. [PMID: 16551557 DOI: 10.1080/08927010500484854] [Citation(s) in RCA: 165] [Impact Index Per Article: 9.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Bioadhesion and surface wettability are influenced by microscale topography. In the present study, engineered pillars, ridges and biomimetic topography inspired by the skin of fast moving sharks (Sharklet AF) were replicated in polydimethylsiloxane elastomer. Sessile drop contact angle changes on the surfaces correlated well (R2 = 0.89) with Wenzel and Cassie and Baxter's relationships for wettability. Two separate biological responses, i.e. settlement of Ulva linza zoospores and alignment of porcine cardiovascular endothelial cells, were inversely proportional to the width (between 5 and 20 microm) of the engineered channels. Zoospore settlement was reduced by approximately 85% on the finer (ca 2 microm) and more complex Sharklet AF topographies. The response of both cell types suggests their responses are governed by the same underlying thermodynamic principles as wettability.
Collapse
Affiliation(s)
- Michelle L Carman
- Department of Biomedical Engineering, University of Florida, Gainesville 32611-6400, USA
| | | | | | | | | | | | | | | | | |
Collapse
|
30
|
Di Iorio D, Traini T, Degidi M, Caputi S, Neugebauer J, Piattelli A. Quantitative evaluation of the fibrin clot extension on different implant surfaces: an in vitro study. J Biomed Mater Res B Appl Biomater 2005; 74:636-42. [PMID: 15803487 DOI: 10.1002/jbm.b.30251] [Citation(s) in RCA: 44] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
The aim of the present study was a quantitative evaluation of the in vitro fibrin clot extension on different implant surfaces. Forty-five disk-shaped commercially pure Grade 2 titanium samples with three different surface topographies (machined, DPS, and Plus) were used in the present study. For the quantitative evaluation of the fibrin clot, 30 specimens were used (10 per group); human whole blood was employed. Venous blood was drawn from three healthy adult volunteers, and 0.2 mL were immediately dropped onto the surface of each specimen. Contact time was 5 min at room temperature; then the samples were rinsed with saline solution and fixed in a buffered solution of glutaraldehyde and paraformaldehyde. Samples were washed again with buffer and dehydrated in an ascending alcohol series. Specimens belonging to all groups were observed under SEM at a magnification of 1000x. From each sample, 50 random micrographs were collected in .tif format with an N x M 1024 x 768 grid of pixels. Quantitative analysis of fibrin clot extension showed the following results: in machined samples fibrin clot extension was 345987.2 +/- 63747.7 pixels(2) (mean +/- SD), in DPS samples fibrin clot extension was 375930.9 +/- 54726.86 pixels(2) (mean +/- SD), and in Plus samples, fibrin clot extension was 612333.6 +/- 46268.42 pixels(2) (mean +/- SD). With ANOVA it was possible to find that there were significant differences among the groups. The Tukey test revealed that the extension of the fibrin clot of Plus samples was statistically higher compared to both machined and DPS samples. The results of this in vitro study indicate that there is a correlation between implant surface morphology and fibrin clot extension. Improvement in surface microtexture complexity seems to determine the formation of a more extensive and three dimensionally complex fibrin scaffold. Further investigations are necessary to explain in more detail the mechanisms that regulate the fibrin clot formation on different implant surfaces.
Collapse
Affiliation(s)
- Donato Di Iorio
- Department of Applied Sciences of Oral and Dental Diseases, School of Dentistry, University G. d'Annunzio of Chieti-Pescara, Italy
| | | | | | | | | | | |
Collapse
|
31
|
Mardilovich A, Kokkoli E. Patterned biomimetic membranes: effect of concentration and pH. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:7468-75. [PMID: 16042481 DOI: 10.1021/la0468085] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
Planar-supported lipid bilayers have attracted enormous attention because of their properties as model cell membranes, which can be employed in a variety of fundamental biological studies and medical devices. Furthermore, the development of patterned biological interfaces is of great practical and scientific interest because of their potential applications in the field of biosensors, drug screening, tissue engineering, and medical implants. In this study, mica-supported membranes were constructed from biomimetic peptide-amphiphiles and their mixtures with lipidated poly(ethylene glycol) (PEG120) molecules or 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) phospholipids using the Langmuir-Blodgett technique. The two peptide-amphiphiles used in this study were a fibronectin-mimetic with the PHSRN(SG)(3)SGRGDSP headgroup (referred to as PHSRN-GRGDSP) that contains both the primary (GRGDSP) and the synergy (PHSRN) recognition sites for alpha(5)beta(1) integrins and a peptide-amphiphile that mimics a fragment of the N-terminus of the fractalkine receptor (referred to as NTFR). Compression isotherms of the peptide-amphiphiles and their mixtures with PEG120 at the air/water interface were recorded and analyzed to evaluate the extent of miscibility in the two-component LB films. Domain formation in mica-supported bilayers constructed from mixtures of peptide-amphiphiles and lipidated PEG120 or DPPC was observed using atomic force microscopy. In PHSRN-GRGDSP/PEG120 mixtures deposited from an aqueous subphase at pH 7, concentration-dependent phase separation was observed on the AFM images. The NTFR/PEG120 and NTFR/DPPC mixtures deposited at pH 10 exhibited extensive lateral phase separation at all mixture compositions, whereas at deposition pH 7 the concentrations of NTFR/DPPC examined here were well mixed.
Collapse
Affiliation(s)
- Anastasia Mardilovich
- Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455, USA
| | | |
Collapse
|
32
|
Norman JJ, Desai TA. Control of cellular organization in three dimensions using a microfabricated polydimethylsiloxane-collagen composite tissue scaffold. ACTA ACUST UNITED AC 2005; 11:378-86. [PMID: 15871668 DOI: 10.1089/ten.2005.11.378] [Citation(s) in RCA: 54] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Parallel channels of various dimensions have been shown to cause a monolayer of cells in culture to align in the direction of the channels. For the engineering of complex organ systems to become a reality, similar control over the cellular microenvironment in three dimensions must be achieved. Using microfabrication, a polydimethylsiloxane (PDMS) scaffold (40 microm wide, 70-microm-deep parallel channels separated by 25-microm-wide walls) was created. A fibroblast-seeded collagen matrix was then molded around this PDMS scaffold. The PDMS scaffold served as an internal skeleton to guide the cells to grow in the prescribed three-dimensional pattern. Organization, aspect ratio, and the z diameter of the cells were analyzed by confocal microscopy. Fibroblasts elongated and organized in the direction of the channels throughout the height of the scaffold. The mean angle of the cells off of the long axis of the channels was 4.3 +/- 0.7 degrees as opposed to 32.6 +/- 2.2 degrees in controls. The morphology of the cells was also affected by the PDMS scaffold. The nuclei were longer (1.25x) and thinner (0.75x) than in control gels; however, no changes in diameter of the cells in the z direction were seen.
Collapse
Affiliation(s)
- James J Norman
- Department of Biomedical Engineering, Boston University, MA 02215, USA
| | | |
Collapse
|
33
|
Chen YM, Shiraishi N, Satokawa H, Kakugo A, Narita T, Gong JP, Osada Y, Yamamoto K, Ando J. Cultivation of endothelial cells on adhesive protein-free synthetic polymer gels. Biomaterials 2005; 26:4588-96. [PMID: 15722128 DOI: 10.1016/j.biomaterials.2004.11.025] [Citation(s) in RCA: 60] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2004] [Accepted: 11/17/2004] [Indexed: 11/21/2022]
Abstract
Various hydrogels without modification by any cell adhesive proteins have been investigated as cell scaffolds. The present study shows that bovine fetal aorta endothelial cells can adhere, spread, proliferate, and reach confluence on poly(acrylic acid), poly(sodium p-styrene sulfonate), and poly(2-acrylamido-2- methyl-1-propanesulfonic sodium) gels, whereas cells reach subconfluence on poly(vinyl alcohol) and poly(methacrylic acid) gels. The proliferation behavior was sensitive to both hydrogel charge density and crosslinker concentration. The relationship between cell proliferation and zeta potential of gels was discussed. It was found that hydrogels with a negative zeta potential higher than about 20 mV facilitates cell proliferation.
Collapse
Affiliation(s)
- Yong Mei Chen
- Graduate School of Science, Hokkaido University, Kita 10, Nishi 8, Kita-ku, Sapporo 060-0810, Japan
| | | | | | | | | | | | | | | | | |
Collapse
|
34
|
Selmeczi D, Mosler S, Hagedorn PH, Larsen NB, Flyvbjerg H. Cell motility as persistent random motion: theories from experiments. Biophys J 2005; 89:912-31. [PMID: 15951372 PMCID: PMC1366641 DOI: 10.1529/biophysj.105.061150] [Citation(s) in RCA: 177] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023] Open
Abstract
Experimental time series for trajectories of motile cells may contain so much information that a systematic analysis will yield cell-type-specific motility models. Here we demonstrate how, using human keratinocytes and fibroblasts as examples. The two resulting models reflect the cells' different roles in the organism, it seems, and show that a cell has a memory of past velocities. They also suggest how to distinguish quantitatively between various surfaces' compatibility with the two cell types.
Collapse
Affiliation(s)
- David Selmeczi
- Danish Polymer Centre, and Biosystems Department, Risø National Laboratory, Roskilde, Denmark
| | | | | | | | | |
Collapse
|
35
|
Mohammed JS, DeCoster MA, McShane MJ. Micropatterning of Nanoengineered Surfaces to Study Neuronal Cell Attachment in Vitro. Biomacromolecules 2004; 5:1745-55. [PMID: 15360283 DOI: 10.1021/bm0498631] [Citation(s) in RCA: 60] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Methods for producing protein patterns with defined spatial arrangement and micro- and nanoscale features are important for studying cellular-level interactions, including basic cell-cell communications, cell signaling, and mechanisms of drug action. Toward this end, a straightforward, versatile procedure for fabricating micropatterns of bioactive nanofilm coatings as multifunctional biological testbeds is demonstrated. The method, based on a combination of photolithography and layer-by-layer self-assembly (LbL), allows for precise construction of nanocomposite films of potentially complex architecture, and patterning of these films on substrates using a modified lift-off (LO) procedure. As a first step in evaluating nanostructures made with this process, "comparison chips," comprising two coexisting regions of square patterns with relevant proteins/polypeptides on a single substrate, were fabricated with poly(diallyldimethylammonium chloride) (PDDA) as a cell-repellent background. Using neuronal cells as a model biological system, comparison chips were produced with secreted phospholipase A2 (sPLA2), a known membrane-active enzyme for neurons, for direct comparison with gelatin, poly-l-lysine (PLL), or bovine serum albumin (BSA). Fluorescence microscopy, surface profilometry, and atomic force microscopy techniques were used to evaluate the structural properties of the patterns on these chips and show that the patterning technique was successful. Preliminary cell culture studies show that neurons respond and bind specifically to the sPLA2 enzyme embedded in the polyelectrolyte thin films and present as the outermost layer. These findings point to the potential for this method to be applied in developing test substrates for a broad array of studies aimed at identifying important biological structure-function relationships.
Collapse
Affiliation(s)
- J Shaikh Mohammed
- Institute for Micromanufacturing, Louisiana Tech University, Ruston 71272, USA
| | | | | |
Collapse
|