Enhancement of operational stability of an enzyme biosensor for glucose and sucrose using protein based stabilizing agents

Systematic review and meta-analysis of human health-related protein markers for realizing real-time wastewater-based epidemiology

For effective implementation of the wastewater-based epidemiology (WBE) approach, real-time quantification of markers in wastewater is critical for data acquisition before data interpretation, dissemination, and decision-making. This can be achieved by using biosensor technology, but whether the quantification/detection limits of different types of biosensors comply with the concentration of WBE markers in wastewater is unclear. In the present study, we identified promising protein markers with relatively high concentrations in wastewater samples and analyzed biosensor technologies that are potentially available for real-time WBE. The concentrations of potential protein markers in stool and urine samples were obtained through systematic review and meta-analysis. We examined 231 peer-review papers to collect information regarding potential protein markers that can enable us to achieve real-time monitoring using biosensor technology. Fourteen markers in stool samples were identified at the ng/g level, presumably equivalent to ng/L of wastewater after dilution. Moreover, relatively high average concentrations of fecal inflammatory proteins were observed, e.g., fecal calprotectin, clusterin, and lactoferrin. Fecal calprotectin exhibited the highest average log concentration among the markers identified in stool samples with its mean value being 5.24 [95 % CI: 5.05, 5.42] ng/g. We identified 50 protein markers in urine samples at the ng/mL level. Uromodulin (4.48 [95 % CI: 4.20, 4.76] ng/mL) and plasmin (4.18 [95 % CI: 3.15, 5.21] ng/mL) had the top two highest log concentrations in urine samples. Furthermore, the quantification limit of some electrochemical- and optical-based biosensors was found to be around the femtogram/mL level, which is sufficiently low to detect protein markers in wastewater even after dilution in sewer pipes.

Applications of Gelatin in Biosensors: Recent Trends and Progress

Gelatin is a natural protein from animal tissue with excellent biocompatibility, biodegradability, biosafety, low cost, and sol-gel property. By taking advantage of these properties, gelatin is considered to be an ideal component for the fabrication of biosensors. In recent years, biosensors with gelatin have been widely used for detecting various analytes, such as glucose, hydrogen peroxide, urea, amino acids, and pesticides, in the fields of medical diagnosis, food testing, and environmental monitoring. This perspective is an overview of the most recent trends and progress in the development of gelatin-based biosensors, which are classified by the function of gelatin as a matrix for immobilized biorecognition materials or as a biorecognition material for detecting target analytes.

Recent Advances of Point-of-Care Devices Integrated with Molecularly Imprinted Polymers-Based Biosensors: From Biomolecule Sensing Design to Intraoral Fluid Testing

Recent developments of point-of-care testing (POCT) and in vitro diagnostic medical devices have provided analytical capabilities and reliable diagnostic results for rapid access at or near the patient's location. Nevertheless, the challenges of reliable diagnosis still remain an important factor in actual clinical trials before on-site medical treatment and making clinical decisions. New classes of POCT devices depict precise diagnostic technologies that can detect biomarkers in biofluids such as sweat, tears, saliva or urine. The introduction of a novel molecularly imprinted polymer (MIP) system as an artificial bioreceptor for the POCT devices could be one of the emerging candidates to improve the analytical performance along with physicochemical stability when used in harsh environments. Here, we review the potential availability of MIP-based biorecognition systems as custom artificial receptors with high selectivity and chemical affinity for specific molecules. Further developments to the progress of advanced MIP technology for biomolecule recognition are introduced. Finally, to improve the POCT-based diagnostic system, we summarized the perspectives for high expandability to MIP-based periodontal diagnosis and the future directions of MIP-based biosensors as a wearable format.

Glucose Biosensor Based on Disposable Activated Carbon Electrodes Modified with Platinum Nanoparticles Electrodeposited on Poly(Azure A)

Herein, a novel electrochemical glucose biosensor based on glucose oxidase (GOx) immobilized on a surface containing platinum nanoparticles (PtNPs) electrodeposited on poly(Azure A) (PAA) previously electropolymerized on activated screen-printed carbon electrodes (GOx-PtNPs-PAA-aSPCEs) is reported. The resulting electrochemical biosensor was validated towards glucose oxidation in real samples and further electrochemical measurement associated with the generated H₂O₂. The electrochemical biosensor showed an excellent sensitivity (42.7 μA mM⁻¹ cm⁻²), limit of detection (7.6 μM), linear range (20 μM–2.3 mM), and good selectivity towards glucose determination. Furthermore, and most importantly, the detection of glucose was performed at a low potential (0.2 V vs. Ag). The high performance of the electrochemical biosensor was explained through surface exploration using field emission SEM, XPS, and impedance measurements. The electrochemical biosensor was successfully applied to glucose quantification in several real samples (commercial juices and a plant cell culture medium), exhibiting a high accuracy when compared with a classical spectrophotometric method. This electrochemical biosensor can be easily prepared and opens up a good alternative in the development of new sensitive glucose sensors.

Anti-Biofouling Strategies for Long-Term Continuous Use of Implantable Biosensors

The growing trend for personalized medicine calls for more reliable implantable biosensors that are capable of continuously monitoring target analytes for extended periods (i.e., >30 d). While promising biosensors for various applications are constantly being developed in the laboratories across the world, many struggle to maintain reliable functionality in complex in vivo environments over time. In this review, we explore the impact of various biotic and abiotic failure modes on the reliability of implantable biosensors. We discuss various design considerations for the development of chronically reliable implantable biosensors with a specific focus on strategies to combat biofouling, which is a fundamental challenge for many implantable devices. Briefly, we introduce the process of the foreign body response and compare the in vitro and the in vivo performances of state-of-the-art implantable biosensors. We then discuss the latest development in material science to minimize and delay biofouling including the usage of various hydrophilic, biomimetic, drug-eluting, zwitterionic, and other smart polymer materials. We also explore a number of active anti-biofouling approaches including stimuli-responsive materials and mechanical actuation. Finally, we conclude this topical review with a discussion on future research opportunities towards more reliable implantable biosensors.

Recent Advances and Applications of Microfluidic Capillary Electrophoresis: A Comprehensive Review (2017-Mid 2019)

Microfluidic capillary electrophoresis (MCE) is the novel technique resulted from the CE mininaturization as planar separation and analysis device. This review presents and discusses various application fields of this advanced technology published in the period 2017 till mid-2019 in eight different sections including clinical, biological, single cell analysis, environmental, pharmaceuticals, food analysis, forensic and ion analysis. The need for miniaturization of CE and the consequence advantages achieved are also discussed including high-throughput, miniaturized detection, effective separation, portability and the need for micro- or even nano-volume of samples. Comprehensive tables for the MCE applications in the different studied fields are provided. Also, figure comparing the number of the published papers applying MCE in the eight discussed fields within the studied period is included. The future investigation should put into consideration the possibility of replacing conventional CE with the MCE after proper validation. Suitable validation parameters with their suitable accepted ranges should be tailored for analysis methods utilizing such unique technique (MCE).

β-Hydroxybutyrate dehydrogenase decorated MXene nanosheets for the amperometric determination of β-hydroxybutyrate

MXene nanosheets of type Ti₃C₂T_x were modified with β-hydroxybutyrate dehydrogenase and then used as a biosensor for amperometric sensing of β-hydroxybutyrate. The MXene and the nanocomposite were characterized by X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The MXene has a layered structure and proved to be an excellent immobilization matrix providing good compatibility with the enzyme β-hydroxybutyrate dehydrogenase. The MXene-based biosensor, best operated at a potential of - 0.35 V (vs. Ag/AgCl), displays a wide linear range (0.36 to 17.9 mM), a sensitivity of 0.480 μA mM^-1 cm^-2, and a low detection limit (45 μM). The biosensor was successfully applied to the determination of β-hydroxybutyrate in (spiked) real serum samples. Graphical abstract Schematic representation of the synthesis and decoration of Mxene 2D sheets with β-hydroxybutyrate dehydrogenase for the amperometric determination of β-hydroxybutyric acid.

Biomimetic preparation of core-shell structured surface-enhanced Raman scattering substrate with antifouling ability, good stability, and reliable quantitative capability

The fouling and stability are two most critical limiting factors for practical applications of surface-enhanced Raman scattering (SERS)-based microfluidic electrophoresis device. Herein, we present a novel biomimetic nanoengineering strategy to achieve a SERS substrate featuring antifouling ability, good stability, and reliable quantitative capability. Typically, by employing tea polyphenol as the reducing agent, the substrate made of silver core-gold shell nanostructures in situ grown on silicon wafer surface is fabricated. The core-shell nanostructures are further embedded with internal standard molecules. Remarkably, the fabricated substrate preserves distinct SERS effects, adaptable reproducibility, and reliable quantitative ability even if the substrate is incubated with 15% H₂ O₂ , 13% HNO₃ , or 10⁸  CFU/mL bacteria, or suffered from 12-day continuous vibration at 250 rpm/min in PBS buffer. As a proof-of-concept application, the DNA-functionalized substrate is capable of precise quantification of Hg²⁺ with a limit of detection down to ca. 1 pM even in sewage water.

Immobilization of β-galactosidase on tannic acid stabilized silver nanoparticles: A safer way towards its industrial application

In this study, β-galactosidase has been immobilized on tannic acid stabilized silver nanoparticles (AgNPs). Tannic acid is a phytochemical and it is advantageous to use it as a linker molecule for immobilization because of its antidiarrheal and antimicrobial properties, and very low toxicity. AgNPs with immobilized β-galactosidase were characterized for particle size and catalytic properties. The AgNPs consisted of almost monodispersed particles of average diameter of ∼20 nm. β-galactosidase immobilized on tannic acid stabilized AgNPs (83.6% Immobilization yield) exhibited good activity with a high enzyme to carrier ratio as compared to the previous reports. Immobilization did not affect the optimum pH (pH 4.5) of the enzyme, however it retained greater fraction of activity in both alkaline and acidic pH range. The immobilized enzyme exhibited greater fraction of activity at higher temperatures as compared to the soluble enzyme, and its optimum temperature increased by 5 °C. The immobilized enzyme retained almost 60% of its activity after 10th successive use. The immobilized enzyme hydrolyzed 258 and 474 μM lactose from 1% lactose and from milk lactose, respectively, whereas the soluble enzyme hydrolyzed 235 and 424 μM lactose from 1% lactose and from milk lactose, respectively. Excellent activity and stability of β-galactosidase immobilized on AgNPs provides a cost-effective industrial application of this enzyme. β-galactosidase immobilized on tannic acid stabilized AgNPs are free from toxicity hazards of the linker molecules. Hence, it may find constructive enzyme based applications in food technology.

Phenylalanine Monitoring via Aptamer-Field-Effect Transistor Sensors

Determination of the amino acid phenylalanine is important for lifelong disease management in patients with phenylketonuria, a genetic disorder in which phenylalanine accumulates and persists at levels that alter brain development and cause permanent neurological damage and cognitive dysfunction. Recent approaches for treating phenylketonuria focus on injectable medications that efficiently break down phenylalanine but sometimes result in detrimentally low phenylalanine levels. We have identified new DNA aptamers for phenylalanine in two formats, initially as fluorescent sensors and then, incorporated with field-effect transistors (FETs). Aptamer-FET sensors detected phenylalanine over a wide range of concentrations (fM to mM). para-Chlorophenylalanine, which inhibits the enzyme that converts phenylalanine to tyrosine, was used to induce hyperphenylalaninemia during brain development in mice. Aptamer-FET sensors were specific for phenylalanine versus para-chlorophenylalanine and differentiated changes in mouse serum phenylalanine at levels expected in patients. Aptamer-FETs can be used to investigate models of hyperphenylalanemia in the presence of structurally related enzyme inhibitors, as well as naturally occurring amino acids. Nucleic acid-based receptors that discriminate phenylalanine analogs, some that differ by a single substituent, indicate a refined ability to identify aptamers with binding pockets tailored for high affinity and specificity. Aptamers of this type integrated into FETs enable rapid, electronic, label-free phenylalanine sensing.

Rapid determination of kappa-carrageenan using a biosensor from immobilized Pseudomonas carrageenovora cells

A potentiometric whole cell biosensor based on immobilized marine bacterium, Pseudomonas carrageenovora producing κ-carrageenase and glycosulfatase enzymes for specific and direct determination of κ-carrageenan, is described. The bacterial cells were immobilized on the self-plasticized hydrogen ion (H+)-selective acrylic membrane electrode surface to form a catalytic layer. Hydrogen ionophore I was incorporated in the poly(n-butyl acrylate) [poly(nBA)] as a pH ionophore. Catalytic decomposition of κ-carrageenan by the bienzymatic cascade reaction produced neoagarobiose, an inorganic sulfate ion and a proton. The latter was detectable by H+ ion transducer for indirect potentiometric quantification of κ-carrageenan concentration. The use of a disposable screen-printed Ag/AgCl electrode (SPE) provided no cleaning requirement and enabled κ-carrageenan detection to be carried out conveniently without cross contamination in a complex food sample. The SPE-based microbial biosensor response was found to be reproducible with high reproducibility and relative standard deviation (RSD) at 2.6% (n = 3). The whole cell biosensor demonstrated a broad dynamic linear response range to κ-carrageenan from 0.2-100 ppm in 20 mM phosphate buffer saline (PBS) at pH 7.5 with a detection limit at 0.05 ppm and a Nernstian sensitivity of 58.78±0.87 mV/decade (R2 = 0.995). The biosensor showed excellent selectivity towards κ-carrageenan compared to other types of carrageenans tested e.g. ι-carrageenan and λ-carrageenan. No pretreatment to the food sample was necessary when the developed whole cell biosensor was employed for direct assay of κ-carrageenan in dairy product.

Enzyme Biosensors for Biomedical Applications: Strategies for Safeguarding Analytical Performances in Biological Fluids

Enzyme-based chemical biosensors are based on biological recognition. In order to operate, the enzymes must be available to catalyze a specific biochemical reaction and be stable under the normal operating conditions of the biosensor. Design of biosensors is based on knowledge about the target analyte, as well as the complexity of the matrix in which the analyte has to be quantified. This article reviews the problems resulting from the interaction of enzyme-based amperometric biosensors with complex biological matrices containing the target analyte(s). One of the most challenging disadvantages of amperometric enzyme-based biosensor detection is signal reduction from fouling agents and interference from chemicals present in the sample matrix. This article, therefore, investigates the principles of functioning of enzymatic biosensors, their analytical performance over time and the strategies used to optimize their performance. Moreover, the composition of biological fluids as a function of their interaction with biosensing will be presented.

Studies on enhancing operational stability of a reusable laccase-based biosensor probe for detection of ortho-substituted phenolic derivatives

An amperometric principle-based biosensor containing immobilized enzyme laccase from Trametes versicolor was developed for detection of ortho-substituted phenolic derivatives. Different immobilization methods for Trametes versicolor laccase enzyme on cellophane membrane and the enhancement of operational stability of the immobilized enzyme electrode using various protein-based stabilizing agents were studied. Among tested methods of immobilization, co-cross-linking method with bovine serum albumin was superior to the other methods in terms of sensitivity, limit of detection, response time, and operating and thermal stability. Biosensor response reached steady state within 3 min and exhibited maximum activity at 45 °C and pH 6.8. The sensitivity of the ortho-substituted phenols for the test biosensor developed with co-cross-linking method of immobilization using bovine serum albumin as the protein-based stabilizing agent was in the order: 2-aminophenol > guaiacol(2-methoxyphenol) > catechol(2-hydroxyphenol) > cresol(2-methyl phenol) > 2-chlorophenol. Validation of the newly developed biosensor by comparison with HPLC showed good agreement in the results. A newly developed biosensor was applied for quantification of ortho-substituted phenols in simulated effluent samples.

Rational design and applications of conducting polymer hydrogels as electrochemical biosensors

Conducting polymer hydrogels (CPHs) are conducting polymer-based materials that contain high water content and have physical properties, resembling the extracellular environment. Synergizing the advantages of both the organic conductors and hydrogels, CPHs emerged to be candidates for high performance biosensors by providing advantageous interfaces for electrochemical bio-electrodes. Examples include the following: (1) the interface between a biomaterial and an artificial inorganic electrode material; (2) the hybrid electronic interface between an ionic carrier and an electron charge carrier; and (3) the extension of the planar electrode surface to a three-dimensional (3D) porous surface. CPHs with rationally designed 3D nanostructures and molecular structures are advantageous for enhancing the biocompatibility of the electrode, improving enzyme immobilization, creating protective layers to control diffusion, and wiring the electron transference. This review presents a brief overview of the current state-of-the-art research in electrochemical biosensors based on CPHs and describes future directions.

A large response range reflectometric urea biosensor made from silica-gel nanoparticles

A new silica-gel nanospheres (SiO₂NPs) composition was formulated, followed by biochemical surface functionalization to examine its potential in urea biosensor development. The SiO₂NPs were basically synthesized based on sol–gel chemistry using a modified Stober method. The SiO₂NPs surfaces were modified with amine (-NH₂) functional groups for urease immobilization in the presence of glutaric acid (GA) cross-linker. The chromoionophore pH-sensitive dye ETH 5294 was physically adsorbed on the functionalized SiO₂NPs as pH transducer. The immobilized urease determined urea concentration reflectometrically based on the colour change of the immobilized chromoionophore as a result of the enzymatic hydrolysis of urea. The pH changes on the biosensor due to the catalytic enzyme reaction of immobilized urease were found to correlate with the urea concentrations over a linear response range of 50–500 mM (R² = 0.96) with a detection limit of 10 mM urea. The biosensor response time was 9 min with reproducibility of less than 10% relative standard deviation (RSD). This optical urea biosensor did not show interferences by Na⁺, K⁺, Mg²⁺ and NH₄⁺ ions. The biosensor performance has been validated using urine samples in comparison with a non-enzymatic method based on the use of p-dimethylaminobenzaldehyde (DMAB) reagent and demonstrated a good correlation between the two different methods (R² = 0.996 and regression slope of 1.0307). The SiO₂NPs-based reflectometric urea biosensor showed improved dynamic linear response range when compared to other nanoparticle-based optical urea biosensors.

Non-complexed four cascade enzyme mixture: simple purification and synergetic co-stabilization

Cell-free biosystems comprised of synthetic enzymatic pathways would be a promising biomanufacturing platform due to several advantages, such as high product yield, fast reaction rate, easy control and access, and so on. However, it was essential to produce (purified) enzymes at low costs and stabilize them for a long time so to decrease biocatalyst costs. We studied the stability of the four recombinant enzyme mixtures, all of which originated from thermophilic microorganisms: triosephosphate isomerase (TIM) from Thermus thermophiles, fructose bisphosphate aldolase (ALD) from Thermotoga maritima, fructose bisphosphatase (FBP) from T. maritima, and phosphoglucose isomerase (PGI) from Clostridium thermocellum. It was found that TIM and ALD were very stable at evaluated temperature so that they were purified by heat precipitation followed by gradient ammonia sulfate precipitation. In contrast, PGI was not stable enough for heat treatment. In addition, the stability of a low concentration PGI was enhanced by more than 25 times in the presence of 20 mg/L bovine serum albumin or the other three enzymes. At a practical enzyme loading of 1000 U/L for each enzyme, the half-life time of free PGI was prolong to 433 h in the presence of the other three enzymes, resulting in a great increase in the total turn-over number of PGI to 6.2×10⁹ mole of product per mole of enzyme. This study clearly suggested that the presence of other proteins had a strong synergetic effect on the stabilization of the thermolabile enzyme PGI due to in vitro macromolecular crowding effect. Also, this result could be used to explain why not all enzymes isolated from thermophilic microorganisms are stable in vitro because of a lack of the macromolecular crowding environment.

Engineering the interface between glucose oxidase and nanoparticles

The behavior of glucose oxidase (GOx) on gold nanoparticles (NPs) was investigated as a function of (1) NP surface chemistry, (2) stabilizing protein additives, and (3) protein microenvironment. GOx secondary structure and unfolding was probed by circular dichroism (CD) spectroscopy and fluorescence, and GOx enzymatic activity was measured by a colorimetric assay. We also examined the activity and structure of GOx after displacement from the NP surface. Generally, GOx behavior was negatively impacted by conjugation to the NP, and conjugation conditions could vary the influence of the NP. Surface chemistry and protein microenvironment could improve behavior, but addition of stabilizing proteins negatively influenced activity. After displacement from the NPs, GOx tended to remain unfolded, indicating that the interactions with the NP were irreversible.

A biosensor for urea from succinimide-modified acrylic microspheres based on reflectance transduction

New acrylic microspheres were synthesised by photopolymerisation where the succinimide functional group was incorporated during the microsphere preparation. An optical biosensor for urea based on reflectance transduction with a large linear response range to urea was successfully developed using this material. The biosensor utilized succinimide-modified acrylic microspheres immobilized with a Nile blue chromoionophore (ETH 5294) for optical detection and urease enzyme was immobilized on the surface of the microspheres via the succinimide groups. No leaching of the enzyme or chromoionophore was observed. Hydrolysis of the urea by urease changes the pH and leads to a color change of the immobilized chromoionophore. When the color change was monitored by reflectance spectrophotometry, the linear response range of the biosensor to urea was from 0.01 to 1,000 mM (R2 = 0.97) with a limit of detection of 9.97 μM. The biosensor response showed good reproducibility (relative standard deviation = 1.43%, n = 5) with no interference by major cations such as Na+, K+, NH4+ and Mg2+. The use of reflectance as a transduction method led to a large linear response range that is better than that of many urea biosensors based on other optical transduction methods.

The mechanism of inactivation of glucose oxidase from Penicillium amagasakiense under ambient storage conditions

Glucose oxidase (GOx) from Penicillium amagasakiense has a higher specific activity than the more commonly studied Aspergillus niger enzyme, and may therefore be preferred in many medical and industrial applications. The enzyme rapidly inactivates on storage at pH 7.0-7.6 at temperatures between 30 and 40°C. Results of fluorimetry and circular dichroism spectroscopy indicate that GOx inactivation under these conditions is associated with release of the cofactor FAD and molten globule formation, indicated by major loss of tertiary structure but almost complete retention of secondary structure. Inactivation of GOx at pH<7 leads to precipitation, but at pH ≥ 7 it leads to non-specific formation of small soluble aggregates detectable by PAGE and size-exclusion chromatography (SEC). Inactivation of P. amagasakiense GOx differs from that of A. niger GOx in displaying complete rather than partial retention of secondary structure and in being promoted rather than prevented by NaCl. The contrasting salt effects may reflect differences in the nature of the interface between subunits in the native dimers and/or the quantity of secondary structure loss upon inactivation.

Comparative assessment of tea quality by various analytical and sensory methods with emphasis on tea polyphenols

Attempts were made to evolve an efficient technique for quality assessment of tea (Camellia sinensis) using a tyrosinase based biosensor to detect polyphenols (PP). Tyrosinase catalyzes the polymerization of PP to form theaflavins (Tf) and thearubigins (Tr) contributing to the colour and astringency of tea, which determine tea quality. Variation in biosensor response of tea infusions gave an indication of differential amount of Tf and Tr. A comparative study of quality attributes of 8 varieties of commercially available brands of tea (A-H) was done using biosensor and results were compared with conventional techniques such as spectrophotometry, high performance liquid chromatography (HPLC), Commission Internationale de I'Eclairage (CIE) system and sensory evaluation. Considerable correlation was observed among the biosensor, sensory and spectrophotometric evaluation of tea samples. Sample A showed high Tf content and also showed a relative high biosensor response whereas sample G showed relatively poor response. Application of biosensors would serve as a basis for the evaluation of market value of tea in the near future.

A high-throughput enzyme assay for organophosphate residues in milk

A rapid, high-sensitivity, chemiluminescence (CL) enzyme assay for the determination of organophosphate (OP) residues in milk is presented. The assay for quantification of OP residues in milk is based on the inhibition of enzyme butyrylcholinesterase (BuChE). BuChE was stabilized and preloaded in 384 well plates at 30 °C. The assay permits rapid determination of OPs in milk within 12 min including an incubation step. The enzyme assay was tested for individual and mixtures of OPs such as methyl paraoxon (MPOx), methyl parathion (MP) and malathion (MT) in milk to evaluate their synergistic effect on BuChE inhibition. Good linearity was obtained in the range 0.005–50 μg·L⁻¹ for MPOx and 0.5–1,000 μg·L⁻¹ for MP as well as MT in milk. Mean recovery of 93.2%–98.6% was obtained for MPOx spiked milk samples with 0.99%–1.67% reproducibility (RSD). The proposed method facilitated rapid screening of milk samples in 384 well plate formats with further miniaturization presented in 1,536 well plates.

Fiber optic monooxygenase biosensor for toluene concentration measurement in aqueous samples

Measurements of pollutants such as toluene are critical for the characterization of contaminated sites and for the monitoring of remediation processes and wastewater treatment effluents. Fiber optic enzymatic biosensors have the potential to provide cost-effective, real time, continuous, in situ measurements. In this study, a fiber optic enzymatic biosensor was constructed and characterized for the measurement of toluene concentrations in aqueous solutions. The biological recognition element was toluene ortho-monooxygenase (TOM), expressed by Escherichia coli TG1 carrying pBS(Kan)TOM, while an optical fiber coated with an oxygen-sensitive ruthenium-based phosphorescent dye served as the transducer. Toluene was detected based on the enzymatic reaction catalyzed by TOM, which resulted in the consumption of oxygen and changes in the phosphorescence intensity. The biosensor was found to have a limit of detection of 3 μM, a linear signal range up to 100 μM, and a response time of 1 h. The performance was reproducible with different biosensors (RSD=7.4%, n=8). The biosensor activity declined with each measurement and with storage time, particularly at elevated temperatures. This activity loss could be partially reversed by exposure to formate, suggesting that NADH consumption was the primary factor limiting lifetime. This is the first report of an enzymatic toluene sensor and of an oxygenase-based biosensor. Since many oxygenases have been reported, the design concept of this oxygenase-based biosensor has the potential to broaden biosensor applications in environmental monitoring.

The detection of alkaline phosphatase using an electrochemical biosensor in a single-step approach

A one-step, single use, disposable Alkaline Phosphatase (ALP) biosensor has been developed. It is based on the detection of phenol produced by an ALP enzymatic reaction. It can operate at 25 °C in a pH 10 medium. It measures ALP of 0–300 IU/L. The permissible concentrations of glucose, ascorbic acid and urea without interference are 10 mM/L, 5 mg/L and 400 mg/L, respectively. Experimental results are compared to those obtained by spectrophotometric measurements in bovine serum. Excellent linearity between the biosensor outputs and the ALP concentrations exists. The agreement between the measurements of this biosensor and the spectrophotometer is also outstanding.