Expression of lignin peroxidase H2 from Phanerochaete chrysosporium by multi-copy recombinant Pichia strain

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Medium optimization for enhanced production of recombinant lignin peroxidase in Pichia pastoris

OBJECTIVES

Different cultivation conditions and parameters were evaluated to improve the production and secretion of a recombinant Phanerochaete chrysosporium lipH8 gene in Komagataella phaffii (Pichia pastoris).

RESULTS

The recombinant lipH8 gene with its native secretion signal was successfully cloned and expressed in Komagataella phaffii (Pichia pastoris) under the control of the alcohol oxidase 1 promoter (P_AOX1). The results revealed that co-feeding with sorbitol and methanol increased rLiP secretion by 5.9-fold compared to the control conditions. The addition of 1 mM FeSO₄ increased LiP activity a further 6.0-fold during the induction phase. Moreover, the combination of several optimal conditions and parameters yielded an extracellular rLiP activity of 20.05 U l^-1, which is more than ten-fold higher relative to standard growth conditions (BMM10 medium, pH 6 and 30 °C).

CONCLUSION

Extracellular activity of a recombinant LiP expressed in P. pastoris increased more than ten-fold when co-feeding sorbitol and methanol as carbon sources, together with urea as nitrogen source, FeSO₄ supplementation, lower pH and lower cultivation temperature.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Valorization of Lignin and Its Derivatives Using Yeast

As the third most plentiful biopolymer after other lignocellulosic derivates such as cellulose and hemicellulose, lignin carries abundant potential as a substitute for petroleum-based products. However, the efficient, practical, value-added product valorization of lignin remains quite challenging. Although several studies have reviewed the valorization of lignin by microorganisms, this present review covers recent studies on the valorization of lignin by employing yeast to obtain products such as single-cell oils (SCOs), enzymes, and other chemical compounds. The use of yeasts has been found to be suitable for the biological conversion of lignin and might provide new insights for future research to develop a yeast strain for lignin to produce other valuable chemical compounds.

Functional annotation and comparative modeling of ligninolytic enzymes from Trametes villosa (SW.) Kreisel for biotechnological applications

Functional annotation of Trametes villosa genome was performed to search Class II peroxidase proteins in this white-rot fungus, which can be valuable for several biotechnological processes. After sequence identification and manual curation, five proteins were selected to build 3 D models by comparative modeling. Analysis of sequential and structural sequences from selected targets revealed the presence of two putative Lignin Peroxidase and three putative Manganese Peroxidase on this fungal genome. All 3 D models had a similar folding pattern from selected 3 D structure templates. After minimization and validation steps, the best 3 D models were subjected to docking studies and molecular dynamics to identify structural requirements and the interactions required for molecular recognition. Two reliable 3 D models of Class II peroxidases, with typical catalytic site and architecture, and its protein sequences are indicated to recombinant production in biotechnological applications, such as bioenergy.Communicated by Ramaswamy H. Sarma.

Heterologous Expression of Lignocellulose-Modifying Enzymes in Microorganisms: Current Status

Heterologous expression of the carbohydrate-active enzymes in microorganisms is a promising approach to produce bio-based compounds, such as fuels, nutraceuticals and other value-added products from sustainable lignocellulosic sources. Several microorganisms, including Saccharomyces cerevisiae, Escherichia coli, and the filamentous fungi Aspergillus nidulans, have unique characteristics desirable for a biorefinery production approach like well-known genetic tools, thermotolerance, high fermentative capacity and product tolerance, and high amount of recombinant enzyme secretion. These microbial factories are already stablished in the heterologous production of the carbohydrate-active enzymes to produce, among others, ethanol, xylooligosaccharides and the valuable coniferol. A complete biocatalyst able to heterologous express the CAZymes of glycoside hydrolases, carbohydrate esterases and auxiliary activities families could release these compounds faster, with higher yield and specificity. Recent advances in the synthetic biology tools could expand the number and diversity of enzymes integrated in these microorganisms, and also modify those already integrated. This review outlines the heterologous expression of carbohydrate-active enzymes in microorganisms, as well as recent updates in synthetic biology.

The synergistic application of quinone reductase and lignin peroxidase for the deconstruction of industrial (technical) lignins and analysis of the degraded lignin products

The effect of combined quinone reductase (QR) and lignin peroxidase (LiP) on the depolymerization of technical lignins isolated from soda-anthraquinone (SAQ), steam explosion (S-E), and two sulfite processes (NaE and NaPE) was investigated. While LiP is best known for its ability to degrade lignins, it may also cause lignin re-polymerization due to the random coupling of phenoxy radicals and quinoid intermediates. This study evidenced that the addition of the bioreactor produced QR can to some extent limit the lignin re-polymerization by LiP. The synergistic application of QR and LiP lowered the molecular weights (M_w) of SAQ, NaE, S-E, and NaPE lignins by 31%, 34%, 41%, and 52%, respectively. The thermogravimetric analysis also showed that the thermal stability of the four lignins was reduced, whereas gas chromatography-mass spectrometry analysis showed that the degradation products included monomeric phenols. Therefore, the combined QR and LiP system is a promising approach for lignin valorization.

Pichia pastoris — recombinant enzyme producent for environment treatment — review

Since environmental pollution is increasing, scientists try to find a sustainable way for its clean up and for environment protection. Due to increasing knowledge of genetics and recombinant technologies, recombinant enzymes have been increasingly applied for these purposes. This article deals with the possibilities of environmental treatment with different types of enzymes produced by P. pastoris. Environment is polluted mostly with pesticides, wastewaters, phenol compounds, plastics, toxic compounds, wastes from medical treatment, etc. All these compounds have to be eliminated considering the deteriorating biodiversity, human health, and condition of plants. Enzymes are an environmentally friendly way of such treatment.

Synergistic codon optimization and bioreactor cultivation toward enhanced secretion of fungal lignin peroxidase in Pichia pastoris: Enzymatic valorization of technical (industrial) lignins

Lignin peroxidase (LiP) is a well-recognized enzyme for its ability to oxidize lignins, but its commercial availability is limited, which hinders the biotechnological application of LiP-based bioprocesses in lignocellulose biorefineries. This study evaluated a combination strategy to improve the expression of LiP to promote its practical use. The strategy included optimization of the lipH8 gene of Phanerochaete chrysosporium according to the codon usage of Pichia pastoris, followed by fed-batch fermentation using a 14 L bioreactor (10 L working volume). The combination strategy achieved a maximum volumetric LiPH8 activity of 4480 U L^-1, protein concentration of 417 mg L^-1 and a specific activity of 10.7 U mg^-1, which was higher than previous reports. Biochemical characterization showed that the recombinant LiPH8 (rLiPH8) was optimum at pH 3.0, 25 ℃ and 0.4 mM H₂O₂. Using the optimized conditions, rLiPH8 was used to treat isolated technical lignins namely soda-anthraquinone (SAQ) lignin and steam explosion (S-E) lignin. High-performance gel permeation chromatography (HP-GPC) analysis showed that the molecular weight (Mw) of SAQ and S-E lignins were increased by 1.43-and 1.14-fold, respectively, after the enzymatic treatment. Thermogravimetric analysis (TGA) also showed that the thermal stability of the lignins was improved, indicating that the enzyme treatment of lignins with rLiPH8 resulted in lignin re-polymerization. As the first report on rLiPH8 production using P. pastoris, this study has shed light on the possible route for the enhancement of rLiPH8 production and its potential application for upgrading technical lignins.

Linking Enzymatic Oxidative Degradation of Lignin to Organics Detoxification

The major enzymes involved in lignin degradation are laccase, class II peroxidases (lignin peroxidase, manganese peroxidase, and versatile peroxidase) and dye peroxidase, which use an oxidative or peroxidative mechanism to deconstruct the complex and recalcitrant lignin. Laccase and manganese peroxidase directly oxidize phenolic lignin components, while lignin peroxidase and versatile peroxidase can act on the more recalcitrant non-phenolic lignin compounds. Mediators or co-oxidants not only increase the catalytic ability of these enzymes, but also largely expand their substrate scope to those with higher redox potential or more complicated structures. Neither laccase nor the peroxidases are stringently selective of substrates. The promiscuous nature in substrate preference can be employed in detoxification of a range of organics.

Progress and obstacles in the production and application of recombinant lignin-degrading peroxidases

Lignin is 1 of the 3 major components of lignocellulose. Its polymeric structure includes aromatic subunits that can be converted into high-value-added products, but this potential cannot yet been fully exploited because lignin is highly recalcitrant to degradation. Different approaches for the depolymerization of lignin have been tested, including pyrolysis, chemical oxidation, and hydrolysis under supercritical conditions. An additional strategy is the use of lignin-degrading enzymes, which imitates the natural degradation process. A versatile set of enzymes for lignin degradation has been identified, and research has focused on the production of recombinant enzymes in sufficient amounts to characterize their structure and reaction mechanisms. Enzymes have been analyzed individually and in combinations using artificial substrates, lignin model compounds, lignin and lignocellulose. Here we consider progress in the production of recombinant lignin-degrading peroxidases, the advantages and disadvantages of different expression hosts, and obstacles that must be overcome before such enzymes can be characterized and used for the industrial processing of lignin.

Optimization of phenazine-1-carboxylic acid production by a gacA/qscR-inactivated Pseudomonas sp. M18GQ harboring pME6032Phz using response surface methodology

Phenazine-1-carboxylic acid (PCA) production was enhanced in Pseudomonas sp. M18 wild strain and its mutants carrying recombinant pME6032Phz for phz gene cluster overexpression, among which Pseudomonas sp. strain M18GQ/pME6032Phz, a gacA and qscR double gene chromosomally inactivated mutant harboring pME6032Phz, showed the highest PCA yield. The conditions for fermentation and isopropyl-beta-D-1-thiogalactopyranoside (IPTG) induction were optimized for strain M18GQ/pME6032Phz in shake flask experiments. A one-factor-at-a-time approach, followed by a fractional factorial design identified soybean meal, corn steep liquor, and ethanol as statistically significant factors. Optimal concentrations and mutual interactions of the factors were then determined by the method of steepest ascent and by response surface methodology based on the center composite design. The predicted PCA production was 6,335.2 mg/l after 60 h fermentation in the optimal medium of 65.02 g soybean meal, 15.36 g corn steep liquor, 12 g glucose, 21.70 ml ethanol, and 1 g MgSO(4) per liter in the flask fermentations, with induction of 1.0 mmol/l IPTG 24 h after inoculation. In an experimental validation under these conditions, the maximum PCA production was 6,365.0 mg/l. This represents a approximately 60% increase over production by strain M18GQ in optimal conditions. The negative effect of plasmid pME6032 on the expression of chromosomally located phz gene cluster was found in Pseudomonas sp. M18GQ, and the possible reason was discussed in the text.