Some investigations on bioflocculant producing bacteria

Alteromonas arenosi sp. nov., a novel bioflocculant-producing bacterium, isolated from intertidal sand

A novel Gram-stain-negative, strictly aerobic and bioflocculant-producing bacterium, designated as ASW11-36T, was isolated from an intertidal sand collected from coastal areas of Qingdao, PR China. Growth occurred at 15-40 °C (optimum, 30 °C), pH 7.0-9.0 (optimum, pH 7.5) and with 1.5-7.0% (w/v) NaCl (optimum, 2.5-3.0%). In the whole-cell fatty acid pattern prevailed C16:0 and summed feature 3 (C16:1 ω7c and/or C16:1 ω6c). The major isoprenoid quinone was determined to be Q-8 and the major polar lipids were phosphatidylethanolamine (PE) and phosphatidylglycerol (PG), one unidentified aminolipid (AL), one unidentified glycolipid (GL), and two lipids (L1, L2). Based on the phylogenetic analyses of 16S rRNA gene sequences and 618 single-copy orthologous clusters, strain ASW11-36T could represent a novel member of the genus Alteromonas and was closely related to Alteromonas flava P0211T (98.4%) and Alteromonas facilis P0213T (98.3%). The pairwise average nucleotide identity and digital DNA-DNA hybridization values of the ASW11-36T genome assembly against the closely related species genomes were 71.8% and 21.7%, respectively, that clearly lower than the proposed thresholds for species. Based on phenotypic, phylogenetic, and chemotaxonomic analyses, strain ASW11-36T is considered to represent a novel species of the genus Alteromonas, for which the name Alteromonas arenosi sp. nov. is proposed. The type strain is ASW11-36T (= KCTC 82496T = MCCC 1K05585T). In addition, the strain yielded 65% of flocculating efficiency in kaolin suspension with CaCl2 addition. The draft genome of ASW11-36T shared abundant putative CAZy family related genes, especially involved in the biosynthesis of exopolysaccharides, implying its potential environmental and biological applications.

Realizable wastewater treatment process for carbon neutrality and energy sustainability: A review

Despite a quick shift of global goals toward carbon-neutral infrastructure, activated sludge based conventional systems inhibit the Green New Deal. Here, a municipal wastewater treatment plant (MWWTP) for carbon neutrality and energy sustainability is suggested and discussed based on realizable technical aspects. Organics have been recovered using variously enhanced primary treatment techniques, thereby reducing oxygen demand for the oxidation of organics and maximizing biogas production in biological processes. Meanwhile, ammonium in organic-separated wastewater is bio-electrochemically oxidized to N₂ and reduced to H₂ under completely anaerobic conditions, resulting in the minimization of energy requirements and waste sludge production, which are the main problems in activated sludge based conventional processes. The anaerobic digestion process converts concentrated primary sludge to biomethane, and H₂ gas recovered from nitrogen upgrades the biomethane quality by reducing carbon dioxide in biogas. Based on these results, MWWTPs can be simplified and improved with high process and energy efficiencies.

A bioflocculant from Corynebacterium glutamicum and its application in acid mine wastewater treatment

Although many microorganisms have been found to produce bioflocculants, and bioflocculants have been considered as attractive alternatives to chemical flocculants in wastewater treatment, there are few reports on bioflocculants from the safe strain C. glutamicum, and the application of bioflocculants in acid wastewater treatment is also rare attributed to the high content of metal ions and high acidity of the water. In this study, a novel bioflocculant produced by Corynebacterium glutamicum Cg1-P30 was investigated. An optimal production of this bioflocculant with a yield of 0.52 g/L was achieved by Box-Behnken design, using 12.20 g/L glucose, 4.00 g/L corn steep liquor and 3.60 g/L urea as carbon and nitrogen source. The structural characterization revealed that the bioflocculant was mainly composed of 37.50% neutral sugar, 10.03% uronic acid, 6.32% aminosugar and 16.51% protein. Carboxyl, amine and hydroxyl groups were the functional groups in flocculation. The biofocculant was thermally stable and dependent on metal ions and acidic pH, showing a good flocculating activity of 91.92% at the dosage of 25 mg/L by aid of 1.0 mM Fe³⁺ at pH 2.0. Due to these unique properties, the bioflocculant could efficiently remove metal ions such as Fe, Al, Zn, and Pb from the real acid mine wastewater sample without pH adjustment, and meanwhile made the acid mine wastewater solution become clear with an increased neutral pH. These findings suggested the great potential application of the non-toxic bioflocculant from C. glutamicum Cg1-P30 in acid mine wastewater treatment.

Optimized production and characterization of cation-independent bioflocculant produced by Klebsiella sp. 59L

The cation-independent bioflocculant (59LF) extracted from Klebsiella sp. 59L was characterized. 59LF consisted of protein (4.8%) and total sugar (85.2%) with high molecular weight (93.82% of 2120 kDa), and total sugar was composed of 76.45% of neutral sugar, 3.65% of uronic acid, and 1.43% of amino sugar. Results indicated that 59LF was pH tolerant and thermally stable, and the maximum yield of 59LF was 4.078 g/L after 48 h culture. The optimal flocculating activity for Kaolin particles was obtained when the dosage of 59LF was 7.0 mg/L without additional metal ions as coagulant aids. Furthermore, the surface properties of 59LF were observed using a Fourier-transform infrared spectrophotometer and X-ray photoelectron spectroscopy, whereas a porous structure was detected by a scanning electron microscope. Thus, a primary flocculation mechanism of 59LF was proposed. This study provided a potential cation-independent bioflocculant with high productivity and low dosage in future application.

Bioflocculants Produced by Bacterial Strains Isolated from Palm Oil Mill Effluent for Application in the Removal of Eriochrome Black T Dye from Water

Four strains of bioflocculant-producing bacteria were isolated from a palm oil mill effluent (POME). The four bacterial strains were identified as Pseudomonas alcaliphila (B1), Pseudomonas oleovorans (B2), Pseudomonas chengduensis (B3), and Bacillus nitratireducens (B4) by molecular identification. Among the four bacterial strains, Bacillus nitratireducens (B4) achieved the highest flocculating activity (49.15%) towards kaolin clay suspension after eight hours of cultivation time and was selected for further studies. The optimum conditions for Eriochrome Black T (EBT) flocculation regarding initial pH, type of cation, and B4 dosage were determined to be pH 2, Ca²⁺ cations, and a dosage of 250 mL/L of nutrient broth containing B4. Under these conditions, above 90% of EBT dye removal was attained. Fourier transform infrared spectroscopic (FT-IR) analysis of the bioflocculant revealed the presence of hydroxyl, alkyl, carboxyl, and amino groups. This bioflocculant was demonstrated to possess a good flocculating activity, being a promissory, low-cost, harmless, and environmentally friendly alternative for the treatment of effluents contaminated with dyes.

Turbidimetric analysis of growth kinetics of bacteria in the laboratory environment using smartphone

For different microbiological and pathological studies, it is often required to monitor the growth of bacteria in a cultured medium in the laboratory environment. UV-VIS spectrophotometer is commonly used to estimate the growth of bacterial cell population by measuring the absorbance at 600 nm over a period of time. Colony-forming unit (CFU) is another approach, which has been routinely performed to estimate the live bacterial cells on semisolid agar plates. Herein, we demonstrate an alternative yet highly reliable sensing platform on a smartphone using which growth kinetics of different bacteria can be reliably monitored. The performance of the proposed smartphone sensor has been compared with the data obtained from OD600 and CFU analysis. A good correlation of bacterial growth rates enumerated based on the proposed smartphone sensor, bench-top spectrophotometer and CFU analysis have been observed under the experimental conditions.

Microalgal interstrains differences in algal-bacterial biofloc formation during liquid digestate treatment

In this study, the effect of microalgal strains on the formation of algal-bacterial biofloc was investigated in liquid digestate pretreated by a sequencing batch reactor (SBR), which loaded much aerobic bacteria from activated sludge. Six microalgal strains resulted in three cases: no-bioflocculation (Scenedesmus obliquus and Botryococcus braunii), optimal-bioflocculation with high flocculation activity and good growth (Chlorella sp. BWY-1, Haematococcus pluvialis and Dictyosphaerium ehnenbergianum) and over-bioflocculation with high flocculation activity and bad growth (Chlorella vulgaris). Chlorella sp. BWY-1 provided a better level of flocculation activity and growth. Polysaccharides and proteins were present in EPS of algal-bacterial biofloc, and their distribution was confirmed by staining with alcian blue and fluorescein isothiocyanate (FITC).

Development of a new culture medium for bioflocculant production using chicken viscera

The economy of mass bioflocculant production and its industrial application is couple with the cost of production. The growth medium is the most significant factor that accounts for the production cost. In order to find a substitute for the expensive commercial media mostly the carbon and nitrogen sources used for bioflocculant production, we use chicken viscera as a sole source of nutrient for bioflocculant production. The culture conditions for Aspergillus flavus S44-1 growth and bioflocculant yield were optimized through one factor at a time (OFAT). The use of chicken viscera as a sole source to develop a culture medium seems to be more appropriate, simple, reduce cost of bioflocculant production and in addition offers a sustainable means of managing environmental pollution by the poultry waste. In this article, we focus on detailed description of the steps involve in developing an optimized culture medium using chicken viscera as a sole source for bioflocculant production.

•

A new media for bioflocculant production was developed from chicken viscera.

•

The culture conditions for bioflocculant production were determined and optimized.

•

The bioflocculant yield and efficiency were parallel to mycelial weight at log phase.

Sources for isolation of extracellular polymeric substances (EPSs) producing bacterial strains which are capable of using wastewater sludge as solo substrate

Isolation of extracellular polymeric substances (EPSs) producing bacterial strains capable of using sludge as low-cost growth substrate was carried out in this study. A total of 110 EPS-producing strains were isolated from different sources, which include sludge of beer and winery wastewater treatment plant (WWTP); young, 2-month-old and 10-year-old leachate. Thirty-seven isolated strains showed good growth in sludge medium with cell count varying from 10⁶ to 10¹⁰ most probable number (MPN)/mL and total EPS concentration from 2737 to 6639 mg/L. Twenty-one strains produced EPS with high flocculation activity (FA_max varied from 72.0% to 80.2%). The highest FA_max (80.2%) was observed with EPS produced by strain BES 19, which was isolated from sludge of beer WWTP. Sludge of beer WWTP, young leachate and 10-year-old leachate were good sources for isolation of EPS-producing bacteria.

Organic loading rate (OLR) regulation for enhancement of aerobic sludge granulation: Role of key microorganism and their function

According to unique growth characteristics of various environmental microorganism specially with different substrates and their levels, aerobic sludge granulation are studied under different operation mode of influent organic loading rate (OLR), and the EPS component, sludge surface characters and functional microbes are analyzed to achieve a novel process for stable sludge granulation. Results showed that activated sludge cultivated under gradient influent OLR decreasing from 5.5 to 3.5 kgCOD m^-3 d^-1 achieved complete granulation with average size of 438 μm and exopolysaccharide (PS) to protein (PN) ratio over 2.0. Meanwhile, these granules had excellent flocculability and hydrophobicity with Zeta potential and contact angle of -15 mV and 110°, respectively. Principal component analysis (PCA) illustrated that microbes with function of EPS secretion enriched with decreased OLR regulation for their suitable specific growth characteristics, then promoted other microbes aggregation and sludge granulation along with the improvement of cellular surface characters and microbial niche.

Bioflocculation formation of microalgae-bacteria in enhancing microalgae harvesting and nutrient removal from wastewater effluent

Microalgal bacterial flocs can be a promising approach for microalgae harvesting and wastewater treatment. The present study provides an insight on the bioflocs formation to enhance harvesting of Chlorella vulgaris and the removal of nutrients from seafood wastewater effluent. The results showed that the untreated seafood wastewater was the optimal culture medium for the cultivation and bioflocculation of C. vulgaris, with the flocculating activity of 92.0 ± 6.0%, total suspended solids removal of 93.0 ± 5.5%, and nutrient removal of 88.0 ± 2.2%. The bioflocs collected under this optimal condition contained dry matter of 107.2 ± 5.6 g·L^-1 and chlorophyll content of 25.5 ± 0.2 mg·L^-1. The results were promising when compared to those obtained from the auto-flocculation process that induced by the addition of calcium chloride and pH adjustment. Additionally, bacteria present in the wastewater aided to promote the formation of bioflocculation process.

Production and flocculating properties of a compound biopolymer flocculant from corn ethanol wastewater

A compound biopolymer flocculant (CBF) produced using corn ethanol wastewater as substrate was investigated. After optimization of culture conditions, 3.08 g/L of purified CBF was extracted from the culture broth following 48 h of cultivation. The CBF macromolecule is mainly composed of protein (15.9%) and polysaccharide (81.8%). The polysaccharide component includes neutral sugars (28.92%), amino sugars (4.04%) and uronic acid (11.69%), with the neutral sugars being glucose, mannose, and lactose at a molar ratio of 4.1:1.5:1.9. CBF is pH tolerant from 3.0 to 12.0 and thermal tolerant from 20 to 100 °C, allowing for its application over a wide range of conditions. Furthermore, the Langmuir model better describes CBF adsorption on kaolin clay, as compared to the Freundlich model. Charge neutralization and bridging mechanisms are the primary flocculation mechanisms. In addition, CBF shows a high methylene blue removal efficiency. These results indicate that this compound biopolymer flocculant has great potential in dye wastewater treatment.

Characterization of a novel bioflocculant from a marine bacterium and its application in dye wastewater treatment

Background

The identification of microorganisms with excellent flocculant-producing capability and optimization of the fermentation process are necessary for the wide-scale application of bioflocculants. Thus, we evaluated the flocculant-producing ability of a novel strain identified by the screening of marine bacteria, and we report for the first time the properties of the bioflocculant produced by Alteromonas sp. in the treatment of dye wastewater.

Results

A bioflocculant-producing bacterium was isolated from seawater and identified as Alteromonas sp. CGMCC 10612. The optimal carbon and nitrogen sources for the strain were 30 g/L glucose and 1.5 g/L wheat flour. In a 2-L fermenter, the flocculating activity and bioflocculant yield reached maximum values of 2575.4 U/mL and 11.18 g/L, respectively. The bioflocculant was separated and showed good heat and pH stability. The purified bioflocculant was a proteoglycan consisting of 69.61% carbohydrate and 21.56% protein (wt/wt). Infrared spectrometry further indicated the presence of hydroxyl, carboxyl and amino groups preferred for flocculation. The bioflocculant was a nanoparticle polymer with an average mass of 394,000 Da. The purified bioflocculant was able to remove Congo Red, Direct Black and Methylene Blue at efficiencies of 98.5%, 97.9% and 72.3% respectively.

Conclusions

The results of this study indicated that the marine strain Alteromonas sp. is a good candidate for the production of a novel bioflocculant and suggested its potential industrial utility for biotechnological processes.

Electronic supplementary material

The online version of this article (10.1186/s12896-017-0404-z) contains supplementary material, which is available to authorized users.

Bioflocculation: An alternative strategy for harvesting of microalgae - An overview

Microalgae based research has been extensively progressed for the production of value added products and biofuels. Potential application of microalgae for biofuel is recently gained more attention for possibilities of biodiesel and other high value metabolites. However, high cost of production of biomass associated with harvesting technologies is one of the major bottleneck for commercialization of algae based industrial product. Based on the operation economics, harvesting efficiency, technological possibilities, flocculation of algal biomass is a superior method for harvesting microalgae from the growth medium. In this article, latest trends of microalgal cell harvesting through flocculation are reviewed with emphasis on current progress and prospect in environmental friendly bio-based flocculation approach. Bio-flocculation based microalgae harvesting technologies is a promising strategy for low cost microalgal biomass production for various applications.

Simultaneously upgrading biogas and purifying biogas slurry using cocultivation of Chlorella vulgaris and three different fungi under various mixed light wavelength and photoperiods

In order to purify biogas slurry and biogas simultaneously, three different fungi, Pleurotus geesteranus (P. geesteranus), Ganoderma lucidum (G. lucidum), and Pleurotus ostreatus (P. ostreatus) were pelletized with Chlorella vulgaris (C. vulgaris). The results showed that the optimal light wavelength ratio for red:blue was 5:5 for these three different fungi-assisted C. vulgaris, resulting in higher specific growth rate as well as nutrient and CO₂ removal efficiency compared with other ratios. G. lucidum/C. vulgaris was screened as the best fungi-mialgae for biogas slurry purification and biogas upgrading with light/dark ratio of 14h:10h, which was also confirmed by the economic efficiency analysis of the energy consumptions. These results will provide a theoretical foundation for large-scale biogas slurry purifying and biogas upgrading using microalgae.

Isolation of Potential Bacteria as Inoculum for Biofloc Formation in Pacific Whiteleg Shrimp, Litopenaeus vannamei Culture Ponds

BACKGROUND AND OBJECTIVE

A new green technology to reduce environmental damages while optimizing production of Pacific Whiteleg shrimp, Litopenaeus vannamei was developed known as "Biofloc technology". Microbial communities in biofloc aggregates are responsible in eliminating water exchange and producing microbial proteins that can be used as supplemented feed for L. vannamei. This study aimed to isolate and identify potential bioflocculant-producing bacteria to be used as inoculum for rapid formation of biofloc.

MATERIALS AND METHODS

For the purpose of this study, bacterial communities during 0, 30 and 70 days of culture (DOC) of L. vannamei grow-out ponds were isolated and identified through phenotypic and 16S rDNA sequences analysis. Phylogenetic relationships between isolated bacteria were then evaluated through phylogenetic tree analysis. One-way analysis of variance (ANOVA) was used to compare the differences of microbial communities at each DOC.

RESULTS

Out of 125 bacterial isolates, nine species of bacteria from biofloc were identified successfully. Those bacteria species were identified as Halomonas venusta, H. aquamarina, Vibrio parahaemolyticus, Bacillus infantis, B. cereus, B. safensis, Providencia vermicola, Nitratireductor aquimarinus and Pseudoalteromonas sp., respectively. Through phylogenetic analysis, these isolates belong to Proteobacteria and Firmicutes families under the genera of Halomonas sp., Vibrio sp., Bacillus sp., Providencia sp., Nitratireductor sp. and Pseudoalteromonas sp.

CONCLUSION

In this study, bioflocculant-producing bacteria were successfully identified which are perfect candidates in forming biofloc to reduce water pollution towards a sustainable aquaculture industry. Presence of Halomonas sp. and Bacillus sp. in all stages of biofloc formation reinforces the need for new development regarding the ability of these species to be used as inoculum in forming biofloc rapidly.

Bioflocculants' production in a biomass-degrading bacterium using untreated corn stover as carbon source and use of bioflocculants for microalgae harvest

BACKGROUND

Bioflocculation has been developed as a cost-effective and environment-friendly method to harvest multiple microalgae. However, the high production cost of bioflocculants makes it difficult to scale up. In the current study, low-cost bioflocculants were produced from untreated corn stover by a biomass-degrading bacterium Pseudomonas sp. GO2.

RESULTS

Pseudomonas sp. GO2 showed excellent production ability of bioflocculants through directly hydrolyzing various biomasses. The untreated corn stover was selected as carbon source for bioflocculants' production due to its highest flocculating efficiency compared to that when using other biomasses as carbon source. The effects of fermentation parameters on bioflocculants' production were optimized via response surface methodology. According to the optimal model, an ideal flocculating efficiency of 99.8% was obtained with the fermentation time of 130.46 h, initial pH of 7.46, and biomass content of 0.64%. The relative importance of carboxymethyl cellulase and xylanase accounted for 51.8% in the process of bioflocculants' production by boosted regression tree analysis, further indicating that the bioflocculants were mainly from the hydrolysates of biomass. Biochemical analysis showed that it contained 59.0% polysaccharides with uronic acid (34.2%), 32.1% protein, and 6.1% nucleic acid in the bioflocculants, which had an average molecular weight as 1.33 × 10⁶ Da. In addition, the bioflocculants showed the highest flocculating efficiency at a concentration of 12.5 mg L^-1 and were stable over broad ranges of pH and temperature. The highest flocculating efficiencies obtained for Chlorella zofingiensis and Neochloris oleoabundans were 77.9 and 88.9%, respectively.

CONCLUSIONS

The results indicated that Pseudomonas sp. GO2 can directly utilize various untreated lignocellulolytic biomasses to produce low-cost bioflocculants, which showed the high efficiency to harvest two green microalgae in a low GO2 fermentation broth/algal culture ratio.

Implications for public health demands alternatives to inorganic and synthetic flocculants: bioflocculants as important candidates

Chemical flocculants are generally used in drinking water and wastewater treatment due to their efficacy and cost effectiveness. However, the question of their toxicity to human health and environmental pollution has been a major concern. In this article, we review the application of some chemical flocculants utilized in water treatment, and bioflocculants as a potential alternative to these chemical flocculants. To the best of our knowledge, there is no report in the literature that provides an up‐to‐date review of the relevant literature on both chemical flocculants and bioflocculants in one paper. As a result, this review paper comprehensively discussed the various chemical flocculants used in water treatment, including their advantages and disadvantages. It also gave insights into bioflocculants production, challenges, various factors influencing their flocculating efficiency and their industrial applications, as well as future research directions including improvement of bioflocculants yields and flocculating activity, and production of cation‐independent bioflocculants. The molecular biology and synthesis of bioflocculants are also discussed.

Characterization of a Bioflocculant (MBF-UFH) Produced by Bacillus sp. AEMREG7

A bioflocculant named MBF-UFH produced by a Bacillus species isolated from sediment samples of Algoa Bay of the Eastern Cape Province of South Africa was characterized. The bacterial identification was through 16S rDNA sequencing; nucleotide sequences were deposited in GenBank as Bacillus sp. AEMREG7 with Accession Number KP659187. The production of the bioflocculant was observed to be closely associated with cell growth. The bioflocculant had the highest flocculating activity of 83.2% after 72 h of cultivation, and approximately 1.6 g of purified MBF-UFH was recovered from 1 L of fermentation broth. Its chemical analyses indicated that it is a glycoprotein composed of polysaccharide (76%) and protein (14%). Fourier transform infrared spectroscopy (FTIR) revealed that it consisted of hydroxyl, amide, carboxyl and methoxyl as the functional moieties. Scanning electron microscopy (SEM) revealed the amorphous structure of MBF-UFH and flocculated kaolin clay particles. The maximum flocculating activity of 92.6% against kaolin clay suspension was achieved at 0.3 mg/mL over pH ranges of 3-11 with the peak flocculating rate at pH 8 in the presence of MgCl2. The bioflocculant retained high flocculating activity of 90% after heating at 100 °C for 1 h. MBF-UFH appears to have immense potential as an alternative to conventional chemical flocculants.

Production of polysaccharide-based bioflocculant for the synthesis of silver nanoparticles by Streptomyces sp

Polysaccharide-based bioflocculants have attracted considerable attention in recent years due to their biodegradable, harmless and negligible secondary pollution. Bioflocculants are organic macromolecular substances secreted by microorganisms. A simple, cost-effective and green method was developed for the biosynthesis of silver nanoparticles using polysaccharides as reducing and stabilizing agents. In this paper, we report on the production and optimization of polysaccharide-based bioflocculant for the green synthesis of silver nanoparticles by Streptomyces sp. MBRC-91. Medium composition and culture conditions for polysaccharide-based bioflocculants were statistically optimized by response surface methodology (RSM). The bioflocculant production was statistically optimized with most significant factors, namely palm jaggery (18.73g/L), yeast extract (2.07g/L), K2HPO4 (3.74g/L) and NaCl (0.38g/L), respectively. The biosynthesized silver nanoparticles were characterized by UV-vis spectroscopy, XRD, FTIR, FESEM, EDXA and HRTEM. The biosynthesized silver nanoparticles revealed strong antibacterial activity in sewage water and this result could make a new avenue in the wastewater treatment. Therefore, the biosynthesized silver nanoparticles can be extended as an alternative for the development of new bactericidal bionanomaterials for wastewater treatment and biotechnological applications.

Bioflocculant production from untreated corn stover using Cellulosimicrobium cellulans L804 isolate and its application to harvesting microalgae

BACKGROUND

Microalgae are widely studied for biofuel production. Nevertheless, harvesting step of biomass is still a critical challenge. Bioflocculants have been applied in numerous applications including the low-cost harvest of microalgae. A major bottleneck for commercial application of bioflocculant is its high production cost. Lignocellulosic substrates are abundantly available. Hence, the hydrolyzates of rice stover and corn stover have been used as carbon source to produce the bioflocculant in previous studies. However, the hydrolyzates of biomass required the neutralization of pH before the downstream fermentation processes, and the toxic by-products produced during hydrolysis process inhibited the microbial activities in the subsequent fermentation processes and contaminated the bioflocculant product. Therefore, strains that can secrete plant cell-wall-degrading enzymes and simultaneously produce bioflocculants through directly degrading the lignocellulosic biomasses are of academic and practical interests.

RESULTS

A lignocellulose-degrading strain Cellulosimicrobium cellulans L804 was isolated in this study, which can produce the bioflocculant MBF-L804 using untreated biomasses, such as corn stover, corn cob, potato residues, and peanut shell. The effects of culture conditions including initial pH, carbon source, and nitrogen source on MBF-L804 production were analyzed. The results showed that over 80 % flocculating activity was achieved when the corn stover, corn cob, potato residues, and peanut shell were used as carbon sources and 4.75 g/L of MBF-L804 was achieved under the optimized condition: 20 g/L dry corn stover as carbon source, 3 g/L yeast extract as nitrogen source, pH 8.2. The bioflocculant MBF-L804 contained 68.6 % polysaccharides and 28.0 % proteins. The Gel permeation chromatography analysis indicated that the approximate molecular weight (MW) of MBF-L804 was 229 kDa. The feasibility of harvesting microalgae Chlamydomonas reinhardtii and Chlorella minutissima using MBF-L804 was evaluated. The highest flocculating efficiencies for C. reinhardtii and C. minutissima were 99.04 and 93.83 %, respectively.

CONCLUSIONS

This study shows for the first time that C. cellulans L804 can directly convert corn stover, corn cob, potato residues and peanut shell into the bioflocculants, which can be used to effectively harvest microalgae.

Production, characterization, and flocculation mechanism of cation independent, pH tolerant, and thermally stable bioflocculant from Enterobacter sp. ETH-2

Synthetic high polymer flocculants, frequently utilized for flocculating efficiency and low cost, recently have been discovered as producing increased risk to human health and the environment. Development of a more efficient and environmentally sound alternative flocculant agent is investigated in this paper. Bioflocculants are produced by microorganisms and may exhibit a high rate of flocculation activity. The bioflocculant ETH-2, with high flocculating activity (2849 mg Kaolin particle/mg ETH-2), produced by strain Enterobacter sp. isolated from activated sludge, was systematically investigated with regard to its production, characterization, and flocculation mechanism. Analyses of microscopic observation, zeta potential and ETH-2 structure demonstrates the bridging mechanism, as opposed to charge neutralization, was responsible for flocculation of the ETH-2. ETH-2 retains high molecular weight (603 to 1820 kDa) and multi-functional groups (hydroxyl, amide and carboxyl) that contributed to flocculation. Polysaccharides mainly composed of mannose, glucose, and galactose, with a molar ratio of 1∶2.9∶9.8 were identified as the active constituents in bioflocculant. The structure of the long backbone with active sites of polysaccharides was determined as a primary basis for the high flocculation activity. Bioflocculant ETH-2 is cation independent, pH tolerant, and thermally stable, suggesting a potential fit for industrial application.

Extracellular polymeric substances of bacteria and their potential environmental applications

Biopolymers are considered a potential alternative to conventional chemical polymers because of their ease of biodegradability, high efficiency, non-toxicity and non-secondary pollution. Recently, extracellular polymeric substances (EPS, biopolymers produced by the microorganisms) have been recognised by many researchers as a potential flocculent for their applications in various water, wastewater and sludge treatment processes. In this context, literature information on EPS is widely dispersed and is very scarce. Thus, this review marginalizes various studies conducted so far about EPS nature-production-recovery, properties, environmental applications and moreover, critically examines future research needs and advanced application prospective of the EPS. One of the most important aspect of chemical composition and structural details of different moieties of EPS in terms of carbohydrates, proteins, extracellular DNA, lipid and surfactants and humic substances are described. These chemical characteristics of EPS in relation to formation and properties of microbial aggregates as well as degradation of EPS in the matrix (biomass, flocs etc) are analyzed. The important engineering properties (based on structural characteristics) such as adsorption, biodegradability, hydrophilicity/hydrophobicity of EPS matrix are also discussed in details. Different aspects of EPS production process such as bacterial strain maintenance; inoculum and factors affecting EPS production were presented. The important factors affecting EPS production include growth phase, carbon and nitrogen sources and their ratio, role of other nutrients (phosphorus, micronutrients/trace elements, and vitamins), impact of pH, temperature, metals, aerobic versus anaerobic conditions and pure and mixed culture. The production of EPS in high concentration with high productivity is essential due to economic reasons. Therefore, the knowledge about all the aspects of EPS production (listed above) is highly essential to formulate a logical and scientific basis for the research and industrial activities. One of the very important issues in the production/application/biodegradation of EPS is how the EPS is extracted from the matrix or a culture broth. Moreover, EPS matrix available in different forms (crude, loosely bound, tightly bound, slime, capsular and purified) can be used as a bioflocculant material. Several chemical and physical methods for the extraction of EPS (crude form or purified form) from different sources have been analyzed and reported. There is ample information available in the literature about various EPS extraction methods. Flocculability, dewaterability and biosorption ability are the very attractive engineering properties of the EPS matrix. Recent information on important aspects of these properties qualitatively as well as quantitatively has been described. Recent information on the mechanism of flocculation mediated by EPS is presented. Potential role of EPS in sludge dewatering and biosorption phenomenon has been discussed in details. Different factors influencing the EPS ability to flocculate and dewaterability of different suspensions have been included. The factors considered for the discussion are cations, different forms of EPS, concentration of EPS, protein and carbohydrate content of EPS, molecular weight of EPS, pH of the suspension, temperature etc. These factors were selected for the study based upon their role in the flocculation and dewatering mechanism as well the most recent available literature findings on these factors. For example, only recently it has been demonstrated that there is an optimum EPS concentration for sludge flocculation/dewatering. High or low concentration of EPS can lead to destabilization of flocs. Role of EPS in environmental applications such as water treatment, wastewater flocculation and settling, colour removal from wastewater, sludge dewatering, metal removal and recovery, removal of toxic organic compounds, landfill leachate treatment, soil remediation and reclamation has been presented based on the most recent available information. However, data available on environmental application of EPS are very limited. Investigations are required for exploring the potential of field applications of EPS. Finally, the limitations in the knowledge gap are outlined and the research needs as well as future perspectives are highlighted.

Production and characterization of high efficiency bioflocculant isolated from Klebsiella sp. ZZ-3

In this study, a new bioflocculant (ZZ-3) is isolated and evaluated. This novel flocculant was derived Klebsiella, which was identified by 16S rDNA sequencing as well as biochemical and physiological analyses. The composition of ZZ-3 was found to be 84.6% polysaccharides and 6.1% protein. More specifically, the amount (moles) of the polysaccharides rhamnose, mannose, and galactose were found to be 6.48, 2.47, and 1.74 greater than glucose, respectively. Results show ZZ-3 has a relatively high molecular weight (603-1820 kDa) and contains many functional groups (hydroxyl, amide, carboxyl, and methoxyl) that likely contribute to flocculation. The results of microscopic observation, zeta potential measurements, and ZZ-3 bioflocculant structure suggested that bridging was the main mechanism for flocculation with kaolin. Based on a high flocculation efficiency, thermal stability, pH tolerance and the ability to flocculate without additional cations, ZZ-3 shows potential for industrial application.

Optimized production of a novel bioflocculant M-C11 by Klebsiella sp. and its application in sludge dewatering

The optimized production of a novel bioflocculant M-C11 produced by Klebsiella sp. and its application in sludge dewatering were investigated. The optimal medium carbon source, nitrogen source, metal ion, initial pH and culture temperature for the bioflocculant production were glucose, NaNO3, MgSO4, and pH7.0 and 25°C, respectively. A compositional analysis indicated that the purified M-C11 consisted of 91.2% sugar, 4.6% protein and 3.9% nucleic acids (m/m). A Fourier transform infrared spectrum confirmed the presence of carboxyl, hydroxyl, methoxyl and amino groups. The microbial flocculant exhibited excellent pH and thermal stability in a kaolin suspension over a pH range of 4.0 to 8.0 and a temperature range of 20 to 60°C. The optimum bioflocculating activity was observed as 92.37% for 2.56mL M-C11 and 0.37g/L CaCl2 dosages using response surface methodology. The sludge resistance in filtration (SRF) decreased from 11.6×10(12) to 4.7×10(12)m/kg, which indicated that the sludge dewaterability was remarkably enhanced by the bioflocculant conditioning. The sludge dewatering performance conditioned by M-C11 was more efficient than that of inorganic flocculating reagents, such as aluminum sulfate and polymeric aluminum chloride. The bioflocculant has advantages over traditional sludge conditioners due to its lower cost, benign biodegradability and negligible secondary pollution. In addition, the bioflocculant was favorably adapted to the specific sludge pH and salinity.

Extracellular polymeric substances production kinetics of 13 sludge isolates using wastewater sludge as raw material and its flocculation potential

The kinetics of batch fermentation of 13 extracellular polymeric substances (EPS) producing bacterial strains (9 Bacillus, 2 Serratia and 2 Yersinia) were carried out using sterilized sludge as a raw material. The most of Bacillus (µ(max): 0.11-0.27 h⁻¹), Serratia (µ(max): 0.23-0.27 h⁻¹) and Yersinia (µ(max): 0.18-0.19 h⁻¹) strains had capability to grow and produce EPS (1.36-2.12 g/L) in the sterilized sludge. In general, EPS production was mixed growth associated for all the bacterial strains cultivated independently. Bacillus sp. 7, Serratia sp. 2 and Yersinia sp. 2 produced higher concentration (1.95-2.12 g/L) of EPS than the other remaining bacterial strains. Protein and carbohydrate contents of EPS remained constant during fermentation. Broth EPS (B-EPS) exhibited high kaolin flocculation activity (≥ 75%) in most of the cases except Bacillus sp. 1, Bacillus sp. 5 and Bacillus sp. 9, respectively. In general, high flocculation activities (FAs) (≥ 75%), were attained using 1.31-1.70 mg B-EPS/g kaolin, 0.45-0.97 mg protein/g kaolin and 0.11-0.21 mg carbohydrates/g kaolin. The study suggests that further systematic exploration is required for optimizing the process of EPS production. EPS produced in the sludge can potentially be used for different water and wastewater treatments.

Characterization and flocculation efficiency of a bioflocculant produced by a marine Halobacillus

We reported earlier on the bioflocculant production potential of Halobacillus sp. Mvuyo, a marine bacteria isolated from Algoa Bay sediment samples. In this paper we report on the detailed characterization of the purified bioflocculant composed of polysaccharide and protein. The optimum dose of the purified bioflocculant for the clarification of 4 g l(-1) kaolin clay suspension was 0.2 mg ml(-1) at neutral pH. Scanning electron micrograph (SEM) revealed the bioflocculant to have an amorphous structure. The Fourier transform infrared (FTIR) spectrum exhibited the presence of hydroxyl, carboxyl and amino groups in its structure. The bioflocculant was thermostable with relative bioflocculant activity residue of 74.4% after heat treatment at 100 degrees C. Moreover thermogravimetric analysis (TGA) exhibited a degradation temperature (Td) of - 140 degrees C. The flocculation efficiency of the bioflocculant was 86.2% compared with 82.6%, 74.5% and 70.9% for polyethylimine, ferric chloride and alum, respectively. This bioflocculant has immense promise as a substitute to inorganic and synthetic flocculants in view of their hazard implications.

Production of ultra-high molecular weight poly-γ-glutamic acid with Bacillus licheniformis P-104 and characterization of its flocculation properties

A novel strain of Bacillus licheniformis P-104 was isolated from Chinese soybean paste to produce a bioflocculant. The bioflocculant was confirmed as ultra-high molecular weight poly-γ-glutamic acid (γ-PGA) using Fourier transform infrared spectrum, high-performance liquid chromatography, and gel permeation chromatography with multi-angle laser light scattering. The production technology and flocculation properties of γ-PGA were investigated. By fed-batch fermentation in a 7-L bioreactor, the maximum γ-PGA yield reached 41.6 g L(-1) with a productivity rate of 1.07 g L(-1) h(-1). The flocculating activity of γ-PGA for kaolin suspension was 33.5±1.6 1/OD under the optimized flocculation conditions (6 mM Ca(2+), 1.5 mg L(-1) γ-PGA, and pH 6.0). The optimized dosage of γ-PGA for flocculation was just about 30 % of that of reported γ-PGA produced by other strains. Moreover, the flocculation activity of γ-PGA produced by strain P-104 was much higher than commercial γ-PGA with the molecular weight ranging 200-500 kDa and 1,500-2,500 kDa. This study provided a promising strain and an efficient method for production of ultra-high molecular weight γ-PGA which could be used as a potential green bioflocculant.

Cation dependence, pH tolerance, and dosage requirement of a bioflocculant produced by Bacillus spp. UPMB13: flocculation performance optimization through kaolin assays

A bioflocculant-producing bacterial strain with highly mucoid and ropy colony morphological characteristics identified as Bacillus spp. UPMB13 was found to be a potential bioflocculant-producing bacterium. The effect of cation dependency, pH tolerance and dosage requirement on flocculating ability of the strain was determined by flocculation assay with kaolin as the suspended particle. The flocculating activity was measured as optical density and by flocs formation. A synergistic effect was observed with the addition of monovalent and divalent cations, namely, Na⁺, Ca²⁺, and Mg²⁺, while Fe²⁺ and Al³⁺ produced inhibiting effects on flocculating activity. Divalent cations were conclusively demonstrated as the best cation source to enhance flocculation. The bioflocculant works in a wide pH range, from 4.0 to 8.0 with significantly different performances (P < 0.05), respectively. It best performs at pH 5.0 and pH 6.0 with flocculating performance of above 90%. A much lower or higher pH would inhibit flocculation. Low dosage requirements were needed for both the cation and bioflocculant, with only an input of 50 mL/L for 0.1% (w/v) CaCl₂ and 5 mL/L for culture broth, respectively. These results are comparable to other bioflocculants produced by various microorganisms with higher dosage requirements.

Thermostable bacterial bioflocculant produced by Cobetia spp. isolated from Algoa Bay (South Africa)

A novel bioflocculant-producing bacteria was isolated from sediment samples of Algoa Bay in the Eastern Cape Province of South Africa and the effect of culture conditions on the bioflocculant production was investigated. Analysis of the partial nucleotide sequence of the 16S rDNA of the bacteria revealed 99% similarity to Cobetia sp. L222 and the sequence was deposited in GenBank as Cobetia sp. OAUIFE (accession number JF799092). Cultivation condition studies revealed that bioflocculant production was optimal with an inoculum size of 2% (v/v), initial pH of 6.0, Mn(2+) as the metal ion, and glucose as the carbon source. Metal ions, including Na(+), K(+), Li(+), Ca(2+)and Mg(2+) stimulated bioflocculant production, resulting in flocculating activity of above 90%. This crude bioflocculant is thermally stable, with about 78% of its flocculating activity remaining after heating at 100 °C for 25 min. Analysis of the purified bioflocculant revealed it to be an acidic extracellular polysaccharide.

Production of a novel bioflocculant MNXY1 by Klebsiella pneumoniae strain NY1 and application in precipitation of cyanobacteria and municipal wastewater treatment

AIMS

To isolate and characterize the novel bioflocculant-producing bacteria, to optimize the bioflocculant production and to evaluate its potential applications.

METHODS AND RESULTS

Klebsiella pneumoniae strain NY1, a bacterium that produces a novel bioflocculant (MNXY1), was selected on the chemically defined media. It was classified according to the 16S rRNA gene sequence, morphological and microscopic characteristics. MNXY1 was characterized to contain 26% protein and 66% total sugar. The constituent sugar monomers of MNXY1, revealed by NMR analysis, are glucose, galactose and quinovose. Favourable culture conditions for MNXY1 production were determined. Strain NY1 produces a high level (14.9 g l(-1)) of MNXY1. MNXY1 is thermostable and tolerant to the extreme pH. It precipitated 54% of cyanobacteria from laboratory culture and 72% of the total suspended solids from raw wastewater.

CONCLUSIONS

Strain NY1 was identified to produce a novel bioflocculant MNXY1. The outstanding performance of MNXY1 in practical applications and its availability in copious amounts make it attractive for further investigation and development for industrial scale applications.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is first report for the identification of a quinovose-containing bioflocculant and application of a protein-polysaccharide complex bioflocculant in precipitation of cyanobacteria. These findings suggest that MNXY1 holds great potential for use in management of harmful algae and city wastewater treatment.

Harvest of Scenedesmus sp. with bioflocculant and reuse of culture medium for subsequent high-density cultures

The optimal flocculating conditions for harvesting high-density cultures of Scenedesmus sp. were investigated using inorganic coagulants and the bioflocculant produced by Paenibacillus polymyxa AM49. The flocculated medium as nutrients for subsequent algal cultivation was also tested. Consecutive treatment with 8.5 mM CaCl(2) and 0.2 mM FeCl(3) as coagulants and 1% bioflocculant from the culture broth of P. polymyxa AM49 showed the highest flocculating activity of up to 95% for high density algal cultures. The medium flocculated with the coagulants and bioflocculant showed less than 8% decrease in the growth yield in the subsequent algal cultivation. Furthermore, a 20% or 50% fresh BG11 medium supplement allowed the flocculated medium to maintain a high growth yield in subsequent algal cultivation. These results suggest that the flocculation method presented here is efficient and bio-friendly, and allows the reuse of the flocculated medium, thereby contributing to the economic cultivation and harvest of microalgae.

Flocculating performances of exopolysaccharides produced by a halophilic bacterial strain cultivated on agro-industrial waste

This study reports the first systematic investigation of the flocculation dynamics of exopolysaccharides (EPSs) produced by a halophilic bacterial strain grown on pretreated molasses as fermentation substrate. The potential use of these EPSs as an easily biodegradable, natural alternative for synthetic polyelectrolytes which are widely used and contain toxic and carcinogenic monomers was investigated. Flocculating activities of the EPS samples in synthetic water, synthetic sea water and natural sea water media which were used as model raw waters were monitored via the Photometric Dispersion Analyser (PDA 2000) instrument and removals were determined by measuring residual turbidities. One of the six EPS specimens, which formed the largest flocs thus performed highest turbidity removal, exhibited flocculation performance and particle removal efficiency comparable with commercial cationic, nonionic and anionic synthetic polyelectrolytes.

Characteristics and culture conditions of a bioflocculant produced by Penicillium sp

OBJECTIVE

To study the characteristics of a bioflocculant named MBF7 produced by Penicillum strain HHE-P7 and the effects of cultivation conditions on bioflocculant production.

METHODS

The chemical group in the bioflocculant molecules was shown by Fourier transform infrared (FTIR) spectra, and the average molecular weight of MBF7 was estimated by gel permeation chromatography. The effects of medium components on bioflocculant production and flocculating activity were studied.

RESULTS

Phospho-, amino-, hydroxyl, and carboxyl groups were the major fractions of MBF7, and the molecule weight was about 3.0x10(5) Da. In addition, the carbon and nitrogen sources favorable for the bioflocculant production were glucose and yeast extract respectively. When the initial pH of the medium was adjusted to 5.0, high flocculant efficiency could be achieved.

CONCLUSION

The bioflocculant MBF7 is a new macromolecule with high flocculating efficiency for Kaolin suspension, and could be produced under appropriate culture conditions.