Molecular, clinical and political approaches to the problem of cleft lip and palate

Enhancing Craniofacial Bone Reconstruction with Clinically Applicable 3D Bioprinted Constructs

Medical imaging and 3D bioprinting can be used to create patient-specific bone scaffolds with complex shapes and controlled inner architectures. This study investigated the effectiveness of a biomimetic approach to scaffold design by employing geometric control. The biomimetic scaffold with a dense external layer showed improved bone regeneration compared to the control scaffold. New bone filled the defected region in the biomimetic scaffolds, while the control scaffolds only presented new bone at the boundary. Histological examination also shows effective bone regeneration in the biomimetic scaffolds, while fibrotic tissue ingrowth is observed in the control scaffolds. These findings suggest that the biomimetic bone scaffold, designed to minimize competition for fibrotic tissue formation in the bony defect, can enhance bone regeneration. This study underscores the notion that patient-specific anatomy can be accurately translated into a 3D bioprinting strategy through medical imaging, leading to the fabrication of constructs with significant clinical relevance.

Dental anomalies and their therapeutic implications: retrospective assessment of a frequent finding in patients with cleft lip and palate

BACKGROUND

Orofacial clefts are characterized by a frequent occurrence of dental anomalies. Numerous studies demonstrate the high prevalence of dental aplasia, supernumerary teeth, and hypoplastic teeth in patients with cleft lip with/without cleft palate (CL/P), yet the therapeutic consequences are rarely discussed. This study explores prevalence, localization, and association between primary and secondary dentition in a large European collective and begins to evaluate the significance of dental anomalies in the therapeutic course of patients with CL/P.

METHODS

The medical reports of 1070 patients with different entities of CL/P who presented to our clinic within a 15-year investigation period were evaluated retrospectively. Dental anomalies were classified into three different diagnostic groups: dental aplasia, supernumerary teeth and hypoplastic teeth. The statistical analyses included studies of the frequency and localization of dental anomalies in different cleft entities as well as of the association between primary and secondary dentition and the therapeutic consequences.

RESULTS

Uni- or bilateral cleft lip and palate (CLP) (47.5%) occurred most frequently, followed by cleft palate only (CPO) (32.9%) and cleft lip with or without alveolus (CL ± A) (19.6%). Dental anomalies were found significantly more often on the side of the cleft. Aplastic permanent teeth were mostly found in patients with CLP (54.8%), while supernumerary permanent teeth occurred primarily in patients with CL ± A (21.7%). Patients with CPO presented dental aplasia but no patient with CPO showed supernumerary teeth. The occurrence of dental aplasia in the primary dentition significantly increases the probability of aplastic teeth in the permanent dentition. Dental anomalies, in particular dental aplasia, significantly increase patients' need for subsequent orthodontic therapy and orthognathic surgery.

CONCLUSION

Dental aplasia and hypoplasia are common in patients with CL/P not only in the cleft area but in the whole dentition. In the event of dental aplasia in the primary dentition, the frequency of aplastic teeth in the permanent dentition is significantly higher. Additionally, the need for therapeutic interventions, especially concerning orthognathic surgery, seems to be significantly higher in patients with CL/P who are affected by dental anomalies. Clinicians should take this into account when creating long-term treatment plans.

Evaluation of the Multiple Tissue Factors in the Cartilage of Primary and Secondary Rhinoplasty in Cleft Lip and Palate Patients

Cleft lip and palate (CLP) is one of the craniofacial defects. The objective of this study was to identify the differences in appearance between the tissue factors in cartilage of CLP patients after primary and secondary rhinoplasty. Immunohistochemistry was performed with MMP-2, MMP-8, MMP-9, TIMP-2, IL-1α, IL-10, bFGF, and TGFβ1. The quantification of the structures was performed using a semi-quantitative census method. MMP-2, -9, IL-1a, and bFGF demonstrated higher number of positive cells in patients, while the number of MMP-8, IL-1a, -10 and TGFβ1 cells was higher or equal in the control subjects. The only statistically significant difference between CLP-operated patients was found in the TIMP-2 group, where the primary CLP patient group had a higher number of TIMP-2 positive chondrocytes than the secondary CLP patient group (U = 53.5; p = 0.021). The median value of the primary CLP group was ++ number of TIMP-2 positive chondrocytes compared to +++ in the secondary CLP group. No statistically significant difference was found between primary and secondary rhinoplasty patients for other tissue factors. Commonly, the rich expression of different tissue factors suggests a stimulation of higher elasticity in cleft affected cartilage. The statistically significant TIMP-2 elevation in primary operated cartilage indicates an impact of the selective tissue remodeling for hard tissue.

Mineralization Potential of Electrospun PDO-Hydroxyapatite-Fibrinogen Blended Scaffolds

The current bone autograft procedure for cleft palate repair presents several disadvantages such as limited availability, additional invasive surgery, and donor site morbidity. The present preliminary study evaluates the mineralization potential of electrospun polydioxanone:nano-hydroxyapatite : fibrinogen (PDO : nHA : Fg) blended scaffolds in different simulated body fluids (SBF). Scaffolds were fabricated by blending PDO : nHA : Fg in the following percent by weight ratios: 100 : 0 : 0, 50 : 25 : 25, 50 : 50 : 0, 50 : 0 : 50, 0 : 0 : 100, and 0 : 50 : 50. Samples were immersed in (conventional (c), revised (r), ionic (i), and modified (m)) SBF for 5 and 14 days to induce mineralization. Scaffolds were characterized before and after mineralization via scanning electron microscopy, Alizarin Red-based assay, and modified burnout test. The addition of Fg resulted in scaffolds with smaller fiber diameters. Fg containing scaffolds also induced sheet-like mineralization while individual fiber mineralization was noticed in its absence. Mineralized electrospun Fg scaffolds without PDO were not mechanically stable after 5 days in SBF, but had superior mineralization capabilities which produced a thick bone-like mineral (BLM) layer throughout the scaffolds. 50 : 50 : 0 scaffolds incubated in either r-SBF for 5 days or c-SBF for 14 days produced scaffolds with high mineral content and individual-mineralized fibers. These mineralized scaffolds were still porous and will be further optimized as an effective bone substitute in future studies.

Tissue engineering solutions for cleft palates

PURPOSE

Clefts of the lip and palate are the most prevalent congenital craniofacial birth defect in humans. The developing field of tissue engineering is considered for the management of clefts of the lip and palate.

MATERIALS AND METHODS

A review of the literature was carried out by using electronic databases (such as PubMed and ISI Web of Science) to search topics including "cleft palate," "tissue engineering," "bone engineering," "palate engineering," and "alveolar bone grafting." To reflect current practice and research, these searches were limited primarily to articles published after the year 2000.

RESULTS

Current approaches for the treatment of clefts of the lip and palate include surgery and bone grafts; however, there are limitations associated with these therapies. Tissue engineering strategies, particularly alveolar bone engineering and soft tissue engineering, may provide clinicians with new alternatives. The application of these emerging technologies to a pediatric population must be well considered.

CONCLUSIONS

A tissue engineering approach may be a useful alternative for the treatment of cleft palates as it mitigates the concerns of donor site morbidity as well as provides additional options including scaffold implantation and growth factor delivery.

Apoptosis as a creative agent of embryonic development of bucca, mentum and nasolacrimal duct. An in vivo study in rats

INTRODUCTION

For embryonal facial development several fusion processes between different facial prominences are necessary. If fusion fails to appear, various facial clefts may occur, known as median (e.g. lower median cleft lip), oblique (e.g. open nasolacrimal duct) or lateral facial clefts (macrostomia, lateral cleft).

MATERIAL AND METHODS

The development of 3 different facial regions (bucca, mentum, and nasolacrimal duct) was examined in rats using serial histological sections on day 13.5 after conception. Common procedures were used (staining for active caspase-3 and for Ki-67) for histological assessment about the role of apoptotic and proliferative processes in the fusion zones of buccal, mental and nasolacrimal areas.

RESULTS

Multiple apoptotic events were detected in epithelial cells of the respective regions, the proliferative centers were located in the mesenchymal surroundings of fusion zones.

CONCLUSION

A substantial precondition for fusion of facial prominences are proliferative and apoptotic processes in epithelial and mesenchymal cells. Apoptosis contributes to the development of bucca, mentum and the nasolacrimal duct. Absence of apoptoses may be responsible for facial clefts.