Chapter 11.1 Clays and Clay Minerals for Pollution Control

Natech potential due to emerging climate hazards and awareness of the local stakeholders in the coastal industrial site of Kuala Selangor, Malaysia

Climate change may put more industrial sites at risk of Natech incidents, particularly in coastal areas due to the compounding effects of climate hazards. This study investigates industrial facilities with potential for Natech due to emerging floods and delineates awareness of the exposed stakeholders, using the best available information, to strengthen local level climate change adaptation and disaster resilience in IKS Kuala Selangor, Malaysia. Two major methods were employed, conceptual site modelling using the source-pathway-receptor-consequence approach and semi-structured interviews to get insights from the local stakeholders. Findings reveal that in the worst-case scenario, manufacturing industries are exposed to floods, have limited flood protection and unknown containment and storage measures of hazardous materials within their facilities. While the high concentration of total metals in the surrounding topsoil has not been linked directly to the manufacturing industries, they have potential for Natech in future flood events. An area with environmentally available lead and arsenic accumulation linked to agricultural activities is also a potential point source for pollution during flood events in the worst-case scenario. Although most of the exposed local stakeholders are aware of climate hazards, they are not prepared for the risks of Natech. The local adaptation plan should include awareness building on Natech targeting the exposed local stakeholders as well as adequate flood protection and updated guidance on managing the safety of hazardous materials at manufacturing industry facilities.

Binder-type effect on the physico-mechanical, combustion and emission properties of Alstonia boonei De Wild. sawdust and Theobroma cacao L. pod biochar briquettes for energy applications

Energy application potential from the abundant biomass residues is inadequately exploited. Over-dependence on forest trees, its negative environmental impacts, and ever-rising energy costs require alternative production technologies including briquetting. The physico-mechanical and combustion properties of binderless and bindered Alstonia boonei sawdust and Theobroma cacao (cocoa) pod briquettes, carbonized in a steel kiln (at 410±5°C, and a heating rate of 4°C/min from the ambient temperature of 25°C), piston-pressed at 9.0 MPa, were studied. The binders were starch, wax, and clay. Starch-bindered T. cacao pod briquettes recorded the maximum bulk density (640 kg/cm3), while basic density was greatest for sawdust/clay briquette (433 kg/cm3). Sawdust/wax briquette produced much Water Resistance Capacity (76.76%) with safer carbon monoxide (CO) emissions (0.67 ppm). A. boonei sawdust/starch briquettes recorded the greatest calorific value (24.023 MJ/kg), least specific fuel consumption (0.0483 kg/l), and slowest burning rate (0.0005 kg/min). All but T. cacao pod/starch and Sawdust/starch emitted CO below the safe air quality Standard of ≤ 6ppm (24h mean). Binderless sawdust, sawdust/starch and T. cacao pod/starch briquettes recorded 47.86, 20.95 and 11.40 μg/m3 particulate matter (PM2.5) respectively, which are below WHO Air Quality Standard safe for domestic uses. Binderless T. cacao pod produced more harmful CO and PM2.5 than its non-bindered A. boonei sawdust counterpart. Clay-bindered briquettes were the most durable. Briquetting, 'a waste-to-energy technology', enhances bio-residue management for domestic and industrial spaces in the global energy mix.

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Potential interaction mechanisms between PAHs and glomalin related-soil protein (GRSP)

Glomalin-related soil protein (GRSP) has gained widespread attention because of its benefits to carbon sequestration, improving soil quality and fixing heavy metals. However, studies on how GRSP affects the environmental fate of organic contaminants are scarce. In this study, different types of GRSPs were isolated from forest soils and characterized to study the binding of GRSPs and PAHs under different environmental conditions. The results indicated that GRSPs contain abundant functional groups (such as -NH, -COOH, and CO) and material composition, like humic acid, proteins, and lipids. For the tested GRSPs, EE-GRSP has lower DOC, SUVA₂₆₀ and SUVA₂₈₀ values, as well as higher E2/E3 values, indicating that EE-GRSP has lower hydrophobicity and molecular weight. These properties can lead to strong interactions between GRSP and PAHs, especially with benzopyrene, which has a high K_ow and K_sw and a large molecular size, with binding constants ranging from 16,119 to 163,697 L kg^-1. Furthermore, low pH (pH = 3) and temperature (15 °C) could increase GRSP's aggregation, enhance the GRSP binding ability with PAHs, whose binding constants were 11,595 and 5067.3 L kg^-1. Therefore, the binding between GRSP and PAHs may lead to changes in the fate of PAHs in the soil and affect the environmental risk of PAHs. The results presented here will deepen our understanding of the environmental function of GRSPs and provide a theoretical basis to further elucidate the mechanisms of GRSPs and organic pollutants.

Heavy metal stabilization remediation in polluted soils with stabilizing materials: a review

The remediation of soil contaminated by heavy metals has long been a concern of academics. This is due to the fact that heavy metals discharged into the environment as a result of natural and anthropogenic activities may have detrimental consequences for human health, the ecological environment, the economy, and society. Metal stabilization has received considerable attention and has shown to be a promising soil remediation option among the several techniques for the remediation of heavy metal-contaminated soils. This review discusses various stabilizing materials, including inorganic materials like clay minerals, phosphorus-containing materials, calcium silicon materials, metals, and metal oxides, as well as organic materials like manure, municipal solid waste, and biochar, for the remediation of heavy metal-contaminated soils. Through diverse remediation processes such as adsorption, complexation, precipitation, and redox reactions, these additives efficiently limit the biological effectiveness of heavy metals in soils. It should also be emphasized that the effectiveness of metal stabilization is influenced by soil pH, organic matter content, amendment type and dosage, heavy metal species and contamination level, and plant variety. Furthermore, a comprehensive overview of the methods for evaluating the effectiveness of heavy metal stabilization based on soil physicochemical properties, heavy metal morphology, and bioactivity has also been provided. At the same time, it is critical to assess the stability and timeliness of the heavy metals' long-term remedial effect. Finally, the priority should be on developing novel, efficient, environmentally friendly, and economically feasible stabilizing agents, as well as establishing a systematic assessment method and criteria for analyzing their long-term effects.

The impact of livestock activities and geochemical processes on groundwater quality of fractured volcanic rock aquifer: Lake Çıldır watershed (NE Turkey)

This paper presents the impact of livestock activities and geochemical processes on the water quality of a fractured volcanic rock aquifer in the Lake Çıldır watershed, located at the northeastern part of Turkey. The existence of a high livestock population and animal grazing activities in meadow and pasturelands of the watershed during the short summer period poses serious stress on both surface and groundwater resources being the only drinking water supply for the local communities. Therefore, understanding the effect of grazing and livestock breeding activities occurring in the recharge areas of the fractured volcanic rock aquifer is vital to take precautions in order to protect limited water supplies at the watershed and vulnerable lake ecosystem as well. The mean nitrate content of the groundwater was measured at 6.4 ± 6.6 (std. dev) mg/L in the wet (before grazing) period and 7.1 ± 5.9 mg/L in the dry (after grazing) period. Despite low nitrate concentration levels of groundwater, microbial contamination was observed in the spring waters at alarming levels especially after the animal grazing activities. 56%, 26%, and 11% of the groundwater samples showed bacterial contamination in terms of total coliform, fecal coliform, and fecal streptococci contents, respectively, prior to grazing activity, while in pursuit of intense livestock grazing at highland, these microbial indicators have been increased to 92%, 85%, and 77% in the dry period. A significant increase observed in fecal contamination indicates the negative impact of livestock activities on groundwater quality. Al (200-638 µg/L) and Fe (66-218 µg/L) enrichments locally observed in groundwater were related to advanced argillic alteration (kaolinization) and hematization zones in pyroclastic rocks.

Bioelectrochemical systems-based metal removal and recovery from wastewater and polluted soil: Key factors, development, and perspective

Bioelectrochemical systems (BES) are considered efficient and sustainable technologies for bioenergy generation and simultaneously removal/recovery metal (loid)s from soil and wastewater. However, several current challenges of BES-based metal removal and recovery, especially concentrating target metals from complex contaminated wastewater or soil and their economic feasibility of engineering applications. This review summarized the applications of BES-based metal removal and recovery systems from wastewater and contaminated soil and evaluated their performances on electricity generation and metal removal/recovery efficiency. In addition, an in depth review of several key parameters (BES configurations, electrodes, catalysts, metal concentration, pH value, substrate categories, etc.) of BES-based metal removal and recovery was carried out to facilitate a deep understanding of their development and to suggest strategies for scaling up their specific application fields. Finally, the future intervention on multifunctional BES to improve their performances of mental removal and recovery were revealed.

Structural Alteration, Hydration Stability, Heavy Metal Removal Efficiency, and Montmorillonite Porosity Fate by Coupling the Soil Solution pH and a Thermal Gradient

Clay minerals are considered as a promising material in the context of geological barrier for the confinement of radioactive and industrial waste. Understanding the usefulness of the smectite mineral, in this approach, remains insufficient. The deep investigation about structural response/changes, hydrate stability, cation exchange process, permeability, and heavy metal/radionuclide adsorption/removal efficiency under external constraints is needed. To explore the structural alteration, the hydration stability, and the evolution of montmorillonite porosity under a first order of external applied constraints coupling, a reference Na-rich montmorillonite specimen is used as a starting material, and three exchangeable heavy metal cations (Ba2+, Cu2+, and Co2+) have been selected. The applied constraint coupling is realized at laboratory scale and assured by simultaneously varying of the soil solution pH and the thermal gradient. The evaluation of the mineral fraction response is established by correlation of quantitative XRD analysis results, thermal analysis, and porosity measurements. The quantitative XRD analysis allows rebuilding of the theoretical model describing the interlamellar space (IS) configurations/damages, structural heterogeneity degrees, and hydrous stability. Obtained results show a dominant interstratified hydration character, for all studied complexes, attributed to a new IS organization versus the applied constraint strength. Furthermore, all samples exhibit a heterogeneous hydration behavior traduced by the coexistence of different layers of type population within the crystallite. Additionally, the theoretical XRD profile decomposition allowed us to prove link between the domination of the segregated stacking layers mode against the constraint strength. Thermal analysis allowed us to develop theoretical models describing the decrease of the water molecule amounts as a function of the increase in temperature and soil solution pH. Moreover, a specific hydration footprint response and an interstratification mapping are assigned for each corresponding stress degrees. The evolution of montmorillonite porosity is determined by adsorption measurement, based on Brunauer, Emmett, and Teller (BET) and Barrett-Joyner-Halenda (BJH) pore size distribution analyses which confirms for all samples, the exfoliation process, and the mesopore diameter rise by increasing the constraint intensity.

Sorbent and Photocatalytic Potentials of Local Clays for the Removal of Organic Xenobiotic: Case of Crystal Violet

Natural materials are widely used in the field of environmental remediation and are appreciated for their surface physical and chemical properties. Clay constitutes a typical example. In this work, we report the evaluation of sorbent and photocatalytic potentials of local clay of two irrigated rice field waters in the degradation of crystal violet. The structural, textural and compositional properties of the local clay were investigated by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD) and X-ray Fluorescence (XRF) analysis. The analysis results showed that these materials were composed mainly of quartz and kaolinite. The efficiency of these adsorbents (Y. Clay and L. Clay) to eliminate crystal violet dye from aqueous medium was examined at different initial concentrations, pH, contact time, adsorbent dose and the possible interference of inorganic salts from fertilizers. Kinetic studies showed that the adsorption process was well described by the pseudo-second order model and the equilibrium modelling results fitted adequately to the Freundlich model. The maximum amount of uptake capacity achieved at pH 2.0 was 18.40 (mg·g−1) and 20.40 (mg·g−1), respectively, for Y. Clay and L. Clay. The evaluation of the photocatalytic potential showed that the raw clay samples do not show photocatalytic activities during the 30 min of exposure to UV light. On the other hand, their photocatalytic potential is manifested when loaded with titanium dioxide (TiO2). Clays coupled with TiO2 under UV light showed an improvement in the degradation of the crystal violet dye by 15%. The synergistic effects between the high photocatalytic activity of TiO2 and the strong adsorption capacity of clays can be one promising technique for in situ remediation of contaminated soaked rice field.

Assessment of Antimicrobial Potential of Plagiochasma rupestre Coupled with Healing Clay Bentonite and AGNPS

The impact of individual component, i.e., plant extract (Plagiochasma rupestre), biosynthesized silver nanoparticles (AgNPs), and healing clay (bentonite) as antimicrobial agent is reported but their combined effect as a ternary system is a new approach. This study is aimed at investigating the impact of the proposed ternary system against selected human pathogens. AgNPs were synthesized by using Plagiochasma rupestre extract (aqueous) as reducing agent and neutral polymer (PVP) as stabilizer. The morphology, size, and structural properties of synthesized AgNPs were determined with XRD and SEM analysis which showed spherical monomodal particles with an average particle size of 25.5 nm. The antibacterial and antifungal activities of the individual and nanoternary system were investigated. The phytochemical screening of plant extract showed the presence of alkaloids, flavonoids, phenol, and glycosides in methanol extract as compare to aqueous and acetone extract. The antimicrobial activities of crude extracts of Plagiochasma rupestre with AgNPs and bentonite clay were studied as an appropriate candidate for treatment of microbial infections, especially bacterial and fungal diseases. The antioxidant activity of Plagiochasma rupestre aqueous extract and nanoparticles was assessed by (DPPH) free radical, and absorbance was checked at 517 nm. Crude extract has inhibitory effect towards bacteria and fungi, and bentonite clay also showed some degree of antimicrobial resistance. Strategy can be efficiently applied for future engineering and medical. The nanoternary systems showed 3 and 3.5 times higher antibacterial and antifungal activity, respectively, in comparison to Plagiochasma rupestre and bentonite clay, individually.

Experimental and modeling studies of the effects of nanoclay on the oil behaviors in a water-sand system

When oil is released into the oceans, spilled oil may get to the shoreline driven by wind and wave. This study comprehensively explored the effects of bentonite nanoclay on the oil behaviors in a water-sand system from both experimental and modeling perspectives. Four factors including nanoclay concentration, temperature, salinity, and pH have been studied. The increasing nanoclay concentration resulted in the decrease in remaining oil on sand. Higher temperature and salinity were associated with less residual oil on sand in the presence of nanoclay. The lower residual oil on sand with coexisting nanoclay was found to be at pH 7. The factorial analysis results indicated that the nanoclay concentration showed the most significant impact among these factors. Miscibility modeling results showed an increasing temperature was favorable to the nanoclay miscibility. Moreover, the effect of nanoclay on oil behavior was further revealed through the dynamic simulation, in which it can be seen the nanoclay could penetrate into oil droplets and promote the oil detachment from solid substrate. The results of this study can help understand the role of fine particles in the fate and transport of oil on shoreline and support the risk assessment and response planning after oil spill.

Cleanup of oiled shorelines using a dual responsive nanoclay/sodium alginate surface washing agent

Oil spills may affect ecosystems and endanger public health. In this study, we developed a novel and dual responsive nanoclay/sodium alginate (NS) washing fluid, and systematically evaluated its application potential in oiled shoreline cleanup. The characterization results demonstrated that sodium alginate combined with nanoclay via hydrogen bonds, and was inserted into the interlayer spacing of nanoclay. Adding sodium alginate reduced surface and interfacial tensions, while increasing the viscoelasticity of the washing fluid. Batch experiments were conducted to investigate oil removal performance under various conditions. Additionally, the factorial design analysis showed that three single factors (temperature, oil concentration, and salinity), and two interactive effects (temperature/salinity; and oil concentration/HA) displayed significant effects on the oil removal efficiency of the NS washing fluid. Compared to the commercial surfactants, the NS composite exhibited satisfactory removal efficiencies for treating oily sand. Green materials-stabilized Pickering emulsion can potentially be used for oil/water separation. The NS washing agent displayed excellent pH- and Ca²⁺- responsiveness, generating transparent supernatants with low oil concentration and turbidity. Our work opens an interesting avenue for designing economical, high performance, and green washing agents.

Glycoproteins of arbuscular mycorrhiza for soil carbon sequestration: Review of mechanisms and controls

Glycoproteins, e.g., glomalin related soil proteins (GRSP), are sticky organic substances produced by arbuscular mycorrhizal fungi (AMF). This review summarizes the information on i) the biochemical nature, physical state and origin of GRSP, ii) GRSP decomposition and residence time in soil, iii) GRSP functions, in particular the physical, chemical, and biochemical roles for soil aggregation and carbon (C) sequestration, and finally iv) how land use and agricultural management affect GRSP production and subsequently, organic C sequestration. GRSP augment soil quality by increasing water holding capacity, nutrient storage and availability, microbial and enzymatic activities, and microbial production of extracellular polysaccharides. After release into the soil, GRSP become prone to microbial decomposition due to stabilization with organic matter and sesquioxides, and thereby increasing the residence time between 6 and 42 years. Temperate soils contain 2-15 mg GRSP g^-1, whereas arid and semiarid grasslands amount for 0.87-1.7 mg g^-1, and GRSP are lower in desert soils. GRSP content is highest in acidic soils as compared to neutral and calcareous soils. Conservation tillage, organic fertilizers and AMF inhabiting crops (e.g. maize, sorghum, soybean, and wheat) increase GRSP production and transform C into stable forms, thereby sustaining soil health and reducing CO₂ emissions. Crop rotations with non-mycorrhizal species (e.g. rapeseed) and fallow soils reduce AMF growth and consequently, the GRSP production. The GRSP production increases under nutrient and water deficiency, soil warming and elevated CO₂. In the context of global climate change, increased C sequestration through GRSP induced aggregate formation and organic matter stabilization prolong the mean residence time of soil C. Protecting soils against degradation under intensive land use, stable aggregate formation, and prolonging the residence time of C calls for strategies that maximize GRSP production and functions based on reduced tillage, AMF-relevant crop rotations and organic farming.

Effectiveness and Characterization of Novel Mineral Clay in Cd2+ Adsorption Process: Linear and Non-Linear Isotherm Regression Analysis

The excellent adsorption properties of clay minerals make the optimization of heavy metal removal the subject of numerous research projects. In the present study, ASLAVITAL cosmetic clay (ACC) powder was applied for the removal of Cd2+ from water. The main deposit of ACC clay is the Pădurea Craiului Mountains in Romania. A wide range of morpho-structural approaches (SEM, EDX, FTIR, Raman, XRD) were used to characterize the morphology and elemental composition of the adsorbent. As expected for clay minerals, Al (Wt(%) = 11.4 ± 0.9) and Si (Wt(%) = 13.7 ± 1.4) are the main constituents of ACC. After adsorption, Wt(%) = 0.2 ± 0.01 Cd2+ was detected in the sample. As proved before, the initial metal concentration is the primary influencing factor; therefore, batch adsorption of 10–160 mg/L Cd2+ was investigated. After 190 min, an efficiency of 99% was reached, and the quantity in equilibrium increased from 1–8 mg/g. The best fit in linear form was obtained for the Langmuir II. model, where R2 = 0.954 (RL = 0.037–0.027). Based on linear isotherm models, physical bonds formed between ACC and Cd2+ during the favorable adsorption. For the non-linear fits, the Liu model proved to be the best R2 = 0.965, χ2 = 1.101. Pseudo-II-order kinetic model described the experimental data R2 = 0.988–0.999; qexp and qcalc were almost identical (the differences ranged 0.03–0.34).

Adsorption of Polycyclic Aromatic Hydrocarbons by Natural, Synthetic and Modified Clays

Polycyclic aromatic hydrocarbons (PAHs) are of major scientific concern owing to their widespread presence in environmental compartments and their potential toxicological effects on humans and biota. In this study, the adsorption capacity of natural (montmorillonite (Mt)), synthetic (Na-Mica-4), and modified (with octadecylamine and octadecyltrimethylamine (ODA-Mt, ODA-Mica-4, and ODTMA-Mt and ODTMA-Mica-4)) clays were assessed and compared for the removal of 16 PAHs. Materials were synthesized and characterized by X-Ray diffraction, Zeta potential, and Fourier-transform infrared spectroscopy. The results showed its correct preparation and the incorporation of PAHs in the structure of the clays after the adsorption tests. The proposed materials were effective PAH adsorbents, with adsorption percentages close to 100%, in particular those using Mt. Mt and Na-Mica-4 presented a better adsorption capacity than their organofunctionalized derivatives, indicating that the adsorption of PAHs may occur both in the surface part and in the interlayer. The proposed adsorbents take the advantage of being a low cost and highly effective. They can be an interesting alternative for wastewater treatment and soil remediation to prevent PAH contamination.

How the Solid/Liquid Ratio Affects the Cation Exchange Process and Porosity in the Case of Dioctahedral Smectite: Structural Analysis?

The performance of a clay mineral geomembrane used in the context of a geological barrier for industrial and radioactive waste confinement must pass through the understanding of its hydrous response as well as the limits of the cation exchange process which are closely related to the solid/liquid ratio constraint. The Na-rich montmorillonite is used, as starting material, to evaluate the link between the applied external constraint (variable solid/liquid ratio) and the structural response of the material. The geochemical constraint is realized at the laboratory scale, and the possible effects are investigated in the cases of Ba2+ and Ni2+ heavy metal cations. The structural analysis is achieved using the XRD profile modeling approach to quantify the interlayer space (IS) deformation. The quantitative XRD analysis, which consists of the comparison of experimental 001 reflections with the calculated ones deduced from structural models, allowed us to determine the optimal structural parameters describing IS configuration along the $c\ast$ axis. The obtained result showed an interstratified hydration character, for both studied exchangeable cations, regardless of the solid/liquid ratio being described probably by a partial cation exchange process. The theoretical mixed layer structure (MLS) suggests the coexistence of more one cristallite species saturated by more than one exchangeable cations, indicating a partial saturation of all exchangeable sites. The optimum structural parameter values, from the theoretical model, allowed us to follow the evolution of several intrinsic properties versus the applied constraint strength. The variable solid/liquid ratio effect on the material porosity is examined by the BET-specific surface area and BJH pore size distribution (PSD) analyses. The adsorption measurement outcomes confirm XRD results concerning mainly the link between several intrinsic clay properties and the constraint strength.

Swelling layered minerals applications: A solid state NMR overview

Swelling layered clay minerals form an important sub-group of the phyllosilicate family. They are characterized by their ability to expand or contract in the presence or absence of water. This property makes them useful for a variety of applications, ranging from environmental technologies to heterogeneous catalysis, and including pharmaceutical and industrial applications. Solid State Nuclear Magnetic Resonance (SS-NMR) has been extensively applied in the characterization of these materials, providing useful information on their dynamics and structure that is inaccessible using other characterization methods such as X-ray diffraction. In this review, we present the key contributions of SS-NMR to the understanding of the mechanisms that govern some of the main applications associated to swelling clay minerals. The article is divided in two parts. The first part presents SS-NMR conventional applications to layered clay minerals, while the second part comprises an in-depth review of the information that SS-NMR can provide about the different properties of swelling layered clay minerals.

The advantages of clay mineral modification methods for enhancing adsorption efficiency in wastewater treatment: a review

This review discusses the recent trends in the research over the last 30 years to use clay minerals in natural and modified forms for removing different toxic organic/inorganic pollutants. The natural and modified forms of clay minerals have an exceptional ability to remove different contaminants. However, the modification methods can improve the clay mineral adsorption properties that consequently increase more adsorption sites and functional groups to adsorb different environmental pollutants. This review shows the importance of modification methods and more extension of novel clay preparation based on nanotechnology which could raise the control of pollution. The syntheses of functionalized clays such as pillared clays and porous clay heterostructures introduce the new class of heterostructure materials with high adsorption capacity, capability, and selectivity. Due to the acceptable properties of heterostructure materials including high specific surface area, thermal and mechanical stability, and the existence of multifunctional groups to selective adsorption, this review collects more literature of research related to environmental protection issues. However, it is expected much attention to get a better understanding of the adsorption mechanism, regeneration, and recovery process of these materials.

Impact of a tire fire accident on soil pollution and the use of clay minerals as natural geo-indicators

Following the occurrence of a fire at a tire landfill in the surrounding area of Madrid City (Spain), polycyclic aromatic hydrocarbons (PAHs) and trace elements present in soils were analyzed to assess the impact of the fire. The capacity of the soils' clay mineral fraction to reflect this air pollution incident was studied. Fourteen soil samples were collected at different distances under the smoke plume, and they were subjected to high-performance liquid chromatography-photodiode array detection, inductively coupled plasma mass spectrometry and X-ray diffraction analyses. Clay minerals content showed a strong correlation with the pollutants potentially released in the tire fire, acenaphthene, pyrene, benzo(a)pyrene and benzo(a)fluoranthene. Trace metals Zn and Se were related to the proximity of the tire fire without any relationship with clay minerals content. This work suggests the use of natural clay minerals as potential PAHs geo-indicators in response to air pollution, complementary to current air and biological analyses.

Application of seven different clay types in sorbent-modified biodegradability studies with cationic biocides

The cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) can exert inhibitory effects on micro-organisms responsible for their biodegradation. However, under environmentally relevant exposure scenarios the presence of and sorption to organic and inorganic matter can lead to significant reduction of inhibitory effects. In our studies we investigated silica gel and seven clays as inert sorbents to mitigate these inhibitory effects in a 28 day manometric respirometry biodegradation test. CTAB was not inhibitory to the used inoculum, but we did observe that seven out of eight sorbents increased maximum attainable biodegradation, and four out of eight decreased the lag phase. The strongly inhibitory effect of CPC was successfully mitigated by most sorbents, with five out of eight allowing >50% biodegradation within 28 days. Results further indicate that bioaccessibility of the sorbed fractions in the stirred manometric test systems was higher than in calmly shaken headspace test systems. Bioaccessibility might also be limited depending on characteristics of test chemical and sorbent type, with montmorillonite and bentonite apparently providing the lowest level of bioaccessibility with CPC. Clay sorbents can thus be used as environmentally relevant sorbents to mitigate potential inhibitory effects of test chemicals, but factors that impede bioaccessibility should be considered. In addition to apparently increased bioaccessibility due to stirring, the automated manometric respirometry test systems give valuable and highly cost-effective insights into lag phase and biodegradation kinetics; information that is especially relevant for test chemicals of gradual biodegradability.

Atomistic View of Mercury Cycling in Polar Snowpacks: Probing the Role of Hg2+ Adsorption Using Ab Initio Calculations

Photochemical oxidation of atmospheric elemental mercury (Hg0) promotes reactive oxidized Hg (HgII) adsorption on particles and deposition to the polar snowpack. The deposited Hg either returns to the atmosphere via photochemical reduction or remains in the snowpack depending on the strength of adsorption. In this study, we performed ab initio calculations to understand the atomic-level cause of the fate of adsorbed Hg by determining the adsorption affinity for Hg2+, the simplest form of HgII, of barite, halite, muscovite, illite, and ice-Ih as potential adsorbents. The adsorption affinity was estimated by calculating the energy required to dissociate adsorbed Hg2+ from the adsorbents. The results reveal that Hg2+ is stable on the surfaces of the selected adsorbents, except barite, but is prone to photodissociation under solar ultraviolet radiation. This mild adsorption is expected to contribute to the bidirectional exchange of Hg between the atmosphere and the polar snowpack. Thus, this theoretical approach can provide complementary perspectives on polar Hg dynamics beyond the limitations of field and laboratory experiments. Further studies on more complicated and realistic adsorption models with different HgII species and adsorbent surfaces having diverse defective structures are required to better comprehend air–snow Hg cycling in the polar regions.

Inorganic and Hybrid (Organic⁻Inorganic) Lamellar Materials for Heavy metals and Radionuclides Capture in Energy Wastes Management-A Review

The energy industry (nuclear, battery, mining industries, etc.) produces a large quantity of hazardous effluents that may contain radionuclides (¹³⁷Cs and ⁹⁰Sr in particular) and heavy metals. One of the hardest tasks of environmental safety and sustainable development is the purification of wastewater holding these pollutants. Adsorption is one of the most powerful methods for extracting toxic compounds from wastewater. This study reviews the usefulness of clay minerals as adsorbent for removing these hazardous elements to clean up energy production processes. Phyllosilicates are able to extract several heavy metals from effluent, as widely examined. A particular focus is given to synthetic phyllosilicates and their abilities to entrap heavy metals with a special attention paid to those synthesized by sol-gel route. Indeed, this method is attractive since it allows the development of organic–inorganic hybrids from organosilanes presenting various functions (amino, thiol, etc.) that can interact with pollutants. Regarding these pollutants, a part of this review focuses on the interaction of lamellar materials (natural and synthetic phyllosilicates as well as layered double hydroxide) with heavy metals and another part deals with the adsorption of specific radionuclides, cesium and strontium.

An explanation of soil amendments to reduce cadmium phytoavailability and transfer to food chain

Cadmium contamination in soil, water and food has become a global problem since last century's industrial and agricultural revolution. It is a highly toxic metal with serious consequences on human and animal health. Different natural and anthropogenic sources are responsible for Cd release in the soil which ultimately leads to the food chain. Cd persists in soil for long durations due to its minimal microbial or chemical loss. There are various physical, chemical or biological techniques which are helpful to minimize Cd risk in food chain. Among them, in-situ immobilization with organic, inorganic or clay amendments is a cost-effective and an environment friendly strategy to remediate Cd polluted sites. Lime, biochar, organic wastes, phosphorus fertilizers, sepiolite, zeolite, hydroxyapatite and bentonite are commonly used amendments for amelioration of Cd contaminated soils. These amendments reduce Cd uptake and enhance immobilization by adsorption, complexation, and precipitation processes. This review is aimed to provide a comprehensive note on Cd toxicity in humans and environment, its immobilization by different agents through variety of processes, and comparison of technologies for Cd removal from contaminated sites.

Bioremediation of PAHs and VOCs: Advances in clay mineral-microbial interaction

Bioremediation is an effective strategy for cleaning up organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Advanced bioremediation implies that biotic agents are more efficient in degrading the contaminants completely. Bioremediation by microbial degradation is often employed and to make this process efficient, natural and cost-effective materials can serve as supportive matrices. Clay/modified clay minerals are effective adsorbents of PAHs/VOCs, and readily available substrate and habitat for microorganisms in the natural soil and sediment. However, the mechanism underpinning clay-mediated biodegradation of organic compounds is often unclear, and this requires critical investigation. This review describes the role of clay/modified clay minerals in hydrocarbon bioremediation through interaction with microbial agents in specific scenarios. The vision is on a faster, more efficient and cost-effective bioremediation technique using clay-based products. This review also proposes future research directions in the field of clay modulated microbial degradation of hydrocarbons.

Effect of modified montmorillonites on the biodegradation and adsorption of biomarkers such as hopanes, steranes and diasteranes

The effect of modified montmorillonites on the biodegradation and adsorption of selected steranes, diasteranes and hopanes was investigated in aqueous clay/oil microcosm experiments with a hydrocarbon degrading microorganism community. The unmodified montmorillonite was treated with didecyldimethylammonium bromide, hydrochloric acid and the relevant metallic chloride to produce organomontmorillonite, acid activated montmorillonite and homoionic montmorillonite respectively which were used in this study. The study indicated that organomontmorillonite, acid activated montmorillonite and potassium montmorillonite did not support the biodegradation of the selected steranes, diasteranes and hopanes as alteration of the biomarkers via biodegradation varied from a paltry 2-6 %. The adsorption of the selected biomarkers on acid activated montmorillonite and organomontmorillonite was also poor. However, adsorption of the biomarkers on potassium montmorillonite was relatively high. Sodium montmorillonite and unmodified montmorillonite appear to stimulate the biodegradation of the selected biomarkers moderately (30-35 %) with adsorption occurring at low level. Calcium montmorillonite and ferric montmorillonite effected significant biodegradation (51-60 %) of the selected biomarkers.

Natural montmorillonite induced photooxidation of As(III) in aqueous suspensions: roles and sources of hydroxyl and hydroperoxyl/superoxide radicals

Photooxidation of arsenite(As(III)) in a suspension of natural montmorillonite under the irradiation of metal halide lamp (λ ≥ 313 nm)has been investigated. The results showed that the natural montmorillonite induced the photooxidation of As(III) by generating hydroxyl radicals (HO·) and hydroperoxyl/superoxide radicals (HO₂·/O₂⁻·). HO· which was responsible for the As(III) photooxidation. Approximately 38% of HO· was generated by the photolysis of ferric ions, and the formation of the remaining 62% was strongly dependent on the HO₂·/O₂⁻·. The presence of free ironions (Fe(2+) and Fe(3+)), made significant contributions to the photogeneration of these reactive oxygen species (ROS). The photooxidation of As(III) in natural montmorillonite suspensions was greatly influenced by the pH values. The photooxidation of As(III) by natural montmorillonite followed the Langmuir-Hinshelwood equation. In addition, the photooxidation of As(III) could be enhanced by the addition of humic acid. This work demonstrates that photooxidation may be an important environmental process for the oxidation of As(III) and may be a way to remove As(III) from acidic surface water containing iron-bearing clay minerals.

Compositional changes of crude oil SARA fractions due to biodegradation and adsorption on colloidal support such as clays using Iatroscan

The compositional changes of saturates, aromatics, resins and asphaltenes (SARA) fractions in aqueous clay/oil microcosm experiments with a hydrocarbon-degrading microorganism community were analysed using Iatroscan. The clay mineral samples used in this study were organomontmorillonite, acid-activated montmorillonite and K, Ca, Zn and Cr montmorillonites produced by modifying the original montmorillonite sample. The evaluation and quantification of biodegradation and adsorption were carried out using a combination of the Iatroscan and gravimetric analysis. The SARA compositions in the presence of organomontmorillonite and acid-activated montmorillonite after incubation follow the same pattern in which the aromatic fraction is higher than the other fractions unlike in the presence of unmodified, K, Ca and Zn montmorillonites, where the saturates fraction is higher than the other fractions. Changes in SARA fractions due to biodegradation seemed to occur most in the presence of unmodified and calcium montmorillonites; hence, the removal of SARA fractions due to biodegradation was significant and enhanced in the presence of these two clay samples. However, biodegradation in the presence of organomontmorillonite and acid-activated and Cr montmorillonites was hindered. The study indicated that Cr montmorillonite adsorbed resins most, whereas Zn and K montmorillonites adsorbed aromatics most after incubation.

Removal of atrazine by nanoscale zero valent iron supported on organobentonite

The organobentonite (CTMA-Bent) was prepared from Na(+)-saturated bentonite (Na-Bent) by intercalation with cetyltrimethylammonium bromide (CTMA), and used as a carrier of nanoscale zero valent iron (NZVI) for the removal of atrazine. The NZVI/CTMA-Bent composite was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM), and good dispersion of nanoscale iron particles on the carrier was observed. The removal efficiency of atrazine by this composite was compared with that by commercial iron powder and NZVI itself. For both treatments by NZVI and NZVI/CTMA-Bent, the removal efficiency increased as the pH of the solution decreased, and the removal percentage of atrazine by NZVI/CTMA-Bent reached 63.5% at initial pH=5.0 after 120 min. It is not only much higher than that (26.6%) by NZVI containing the same amount of iron, but also superior to the sum (32.1%) of reduction by NZVI plus adsorption by CTMA-Bent (5.5%). Besides, the NZVI/CTMA-Bent has a good long-term stability, and the carrier CTMA-Bent could prevent the iron ions (the byproduct of dechlorination) from leaching into the solution.

Bioassembled layered silicate-metal nanoparticle hybrids

Here we report on the bioenabled assembly of layered nanohybrids using peptides identified with regard to their affinity to the nanoparticle surface. A dodecamer peptide termed M1, determined from a phage peptide display library, was found to bind to the surface of a layered aluminosilicate (montmorillonite, MMT). Fusion of a metal binding domain to the M1 peptide or the M1 peptide by itself was able to direct the growth of metal nanoparticles, such as gold and cobalt-platinum, respectively, on the MMT. This method of producing hybrid nanoclay materials will have utility in catalytic, optical, biomedical, and composite materials applications.

Partial exchange of Fe(III) montmorillonite with hexadecyltrimethylammonium cation increases catalytic activity for hydrophobic substrates

Fe(III) montmorillonite clay that was partially exchanged with hexadecyltrimethylammonium (HDTMA(+)) cations achieved increased catalytic activity for the oxidative coupling of hydrophobic organic substrates. A series of mixed-cation organoclays were produced, where the organic cation content ranged from 6 to 50% relative to the cation-exchange capacity (CEC) of the clay, and were tested for catalytic activity using different Fe(III)-mediated oxidative coupling reactions. Enhanced catalytic activity by Fe(3+)/HDTMA(+) montmorillonite for coupling hydrophobic substrates was observed, with maximum catalytic activity in the oxidative coupling of 2-naphthol observed at 6% HDTMA(+) coverage. However, maximum catalytic activity with a more hydrophobic substrate, anthrone, was achieved with 50% HDTMA(+) coverage, indicating that matching levels of organic modification to substrate hydrophobicity improves catalytic activity. The organization of the organic cations at the clay surfaces proved to be heterogeneous, as determined by scanning transmission X-ray microscopy (STXM) and powder X-ray diffraction. Results from molecular dynamics simulations supported the heterogeneous nature of the catalysts but also pointed toward large regions within the interlayers that may be filled with nonreactive hydrated Fe oxides resulting from the organic cation treatment. The exchangeable Fe content of the organic treated clays, as determined by AAS and ICP measurements, was observed to be higher than expected relative to that of Fe-saturated clay, substantiating this hypothesis. These findings have implications for the development of substrate-specific clay catalysts, where the composition and configuration of exchangeable cations can be matched to a particular substrate or reaction.