Advances in photocatalysis in China

Calculation of Mechanical Properties, Electronic Structure and Optical Properties of CsPbX3 (X = F, Cl, Br, I)

We utilized a first-principle density functional theory for a comprehensive analysis of CsPbX3 (X = F, Cl, Br, I) to explore its physical and chemical properties, including its mechanical behavior, electronic structure and optical properties. Calculations show that all four materials have good stability, modulus of elasticity, hardness and wear resistance. Additionally, CsPbX3 demonstrates a vertical electron leap and serves as a semiconductor material with direct band gaps of 3.600 eV, 3.111 eV, 2.538 eV and 2.085 eV. In examining its optical properties, we observed that the real and imaginary components of the dielectric function exhibit peaks within the low-energy range. Furthermore, the dielectric function gradually decreases as the photon energy increases. The absorption spectrum reveals that the CsPbX3 material exhibits the highest UV light absorption, and as X changes (with the increase in atomic radius within the halogen group of elements), the light absorption undergoes a red shift, becoming stronger and enhancing light utilization. These properties underscore the material's potential for application in microelectronic and optoelectronic device production. Moreover, they provide a theoretical reference for future investigations into CsPbX3 materials.

Recent Advances and Perspectives of Core-Shell Nanostructured Materials for Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into solar fuels is a promising technology to alleviate CO₂ emissions and energy crises. The development of core-shell structured photocatalysts brings many benefits to the photocatalytic CO₂ reduction process, such as high conversion efficiency, sufficient product selectivity, and endurable catalyst stability. Core-shell nanostructured materials with excellent physicochemical features take an irreplaceable position in the field of photocatalytic CO₂ reduction. In this review, the recent development of core-shell materials applied for photocatalytic reduction of CO_{2 is introduced} . First, the basic principle of photocatalytic CO₂ reduction is introduced. In detail, the classification and synthesis techniques of core-shell catalysts are discussed. Furthermore, it is also emphasized that the excellent properties of the core-shell structure can greatly improve the activity, selectivity, and stability in the process of photocatalytic CO₂ reduction. Hopefully, this paper can provide a favorable reference for the preparation of efficient photocatalysts for CO₂ reduction.

Recent advances in visible-light graphitic carbon nitride (g-C3N4) photocatalysts for chemical transformations

Graphitic carbon nitride (g-C3N4) has emerged as a new research hotspot, attracting broad interdisciplinary attention in the form of metal-free and visible-light-responsive photocatalysts in the field of solar energy conversion and environmental remediation. These photocatalysts have evolved as attractive candidates due to their non-toxicity, chemical stability, efficient light absorption capacity in the visible and near-infrared regions, and adaptability as a platform for the fabrication of hybrid materials. This review mainly describes the latest advances in g-C3N4 photocatalysts for chemical transformations. In addition, the typical applications of g-C3N4-based photocatalysts involving organic transformation reactions are discussed (synthesis of heterocycles, hydrosulfonylation, hydration, oxygenation, arylation, coupling reactions, etc.).

Advances in Enzyme and Ionic Liquid Immobilization for Enhanced in MOFs for Biodiesel Production

Biodiesel is a promising candidate for sustainable and renewable energy and extensive research is being conducted worldwide to optimize its production process. The employed catalyst is an important parameter in biodiesel production. Metal-organic frameworks (MOFs), which are a set of highly porous materials comprising coordinated bonds between metals and organic ligands, have recently been proposed as catalysts. MOFs exhibit high tunability, possess high crystallinity and surface area, and their order can vary from the atomic to the microscale level. However, their catalytic sites are confined inside their porous structure, limiting their accessibility for biodiesel production. Modification of MOF structure by immobilizing enzymes or ionic liquids (ILs) could be a solution to this challenge and can lead to better performance and provide catalytic systems with higher activities. This review compiles the recent advances in catalytic transesterification for biodiesel production using enzymes or ILs. The available literature clearly indicates that MOFs are the most suitable immobilization supports, leading to higher biodiesel production without affecting the catalytic activity while increasing the catalyst stability and reusability in several cycles.

Improved Photocatalyzed Degradation of Phenol, as a Model Pollutant, over Metal-Impregnated Nanosized TiO2

Photocatalyzed degradation of phenol in aqueous solution over surface impregnated TiO₂ (M = Cu, Cr, V) under UV-Vis (366 nm) and UV (254 nm) irradiation is described. Nanosized photocatalyts were prepared from TiO₂-P25 by wet impregnation, and characterized by X-ray diffraction, X-ray fluorescence, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy, Raman spectroscopy, and adsorption studies. No oxide phases of the metal dopants were found, although their presence in the TiO₂-P25 lattice induces tensile strain in Cu-impregnated TiO₂-P25, whereas compressive strain in Cr- and V-impregnated TiO₂-P25. Experimental evidences support chemical and mechanical stability of the photocatalysts. Type IV N₂ adsorption–desorption isotherms, with a small H3 loop near the maximum relative pressure were observed. Metal surface impregnated photocatalysts are mesoporous with a similar surface roughness, and a narrow pore distribution around ca. 25 Å. They were chemically stable, showing no metal lixiviation. Their photocatalytic activity was followed by UV-Vis spectroscopy and HPLC–UV. A first order kinetic model appropriately fitted the experimental data. The fastest phenol degradation was obtained with M (0.1%)/TiO₂-P25, the reactivity order being Cu > V >> Cr > TiO₂-P25 under 366 nm irradiation, while TiO₂-P25 > Cu > V > Cr, when using 254 nm radiation. TOC removal under 366 nm irradiation for 300 min showed almost quantitative mineralization for all tested materials, while 254 nm irradiation for 60 min led to maximal TOC removal (ca. 30%). Photoproducts and intermediate photoproducts were identified by HPLC–MS, and appropriate reaction pathways are proposed. The energy efficiency of the process was analysed, showing UV lamps are superior to UVA lamps, and that the efficiency of the surface impregnated catalyst varies in the order Cu > V > Cr.

Facile preparation of a self-assembled Artemia cyst shell-TiO2-MoS2 porous composite structure with highly efficient catalytic reduction of nitro compounds for wastewater treatment

The catalytic reduction of nitro compounds is currently a hot research area, how to efficiently and stably degrade such toxic and harmful substances has become the research goal of many researchers. In this work, an Artemia cyst shell (ACS)-TiO2-MoS2 ternary porous structure was proposed and prepared as a catalyst for the reduction of 2-nitroaniline (2-NA) and 4-nitrophenol (4-NP). The ACS has a large number of porous structures, exhibits a good binding ability with TiO2 and MoS2, and provides a large number of active sites for the catalytic reduction process. The obtained composite material has a good reduction effect on 4-NP and 2-NA, with a good stability and recyclability, which is obviously higher than the reduction effect of ACS-TiO2 and MoS2 under the same conditions. This work provides ideas for the design of porous catalytic materials.

Recent advances in metalloporphyrins for environmental and energy applications

Porphyrin-based chemistry has reached an unprecedented period of rapid development after decades of study. Due to attractive multifunctional properties, porphyrins and their analogues have emerged as multifunctional organometals for environmental and energy purposes. In particular, pioneer works have been conducted to explore their application in pollution abatement, energy conversion and storage and molecule recognition. This review summarizes recent advances of porphyrins chemistry, focusing on elucidating the nature of catalytic process. The Fenton-like redox chemistry and photo-excitability of porphyrins and their analogues are discussed, highlighting the generation of high-valent iron oxo porphyrin species. Finally, challenges in current research are identified and perspectives for future development in this area are presented.

Recent advances in modified TiO2 for photo-induced organic synthesis

The recent advancements of modified TiO₂ materials as photocatalysts for organic synthesis are summarized.

Sulfur-Doped Carbon Nitride Polymers for Photocatalytic Degradation of Organic Pollutant and Reduction of Cr(VI)

As a promising conjugated polymer, binary carbon nitride has attracted extensive attention as a metal-free and visible-light-responsive photocatalyst in the area of photon-involving purification of water and air. Herein, we report sulfur-doped polymeric carbon nitride microrods that are synthesized through thermal polymerization based on trithiocyanuric acid and melamine (TM) supramolecular aggregates. By tuning the polymerization temperature, a series of sulfur-doped carbon nitride microrods are prepared. The degradation of Rhodamine B (RhB) and the reduction of hexavalent chromium Cr(VI) are selected as probe reactions to evaluate the photocatalytic activities. Results show that increasing pyrolysis temperature leads to a large specific surface area, strong visible-light absorption, and accelerated electron-hole separation. Compared to bulk carbon nitride, the highly porous sulfur-doped carbon nitride microrods fabricated at 650 °C exhibit remarkably higher photocatalytic activity for degradation of RhB and reduction of Cr(VI). This work highlights the importance of self-assembly approach and temperature-control strategy in the synthesis of photoactive materials for environmental remediation.