Enhanced visible photocatalytic activity of TiO2 hollow boxes modified by methionine for RhB degradation and NO oxidation

Structural Diversity Design, Four Nucleation Methods Growth and Mechanism of 3D Hollow Box TiO2 Nanocrystals with a Temperature-Controlled High (001) Crystal Facets Exposure Ratio

Three-dimensional (3D) hollow box TiO2 nanocrystals with structural diversity have been designed and grown by four nucleation methods, including the acid dissolution denucleation method with Fe2O3 as heterogeneous nucleation, the topological phase transition method, the sonic solvothermal method, and the air atmosphere sintering method with TiOF2 as homogeneous nucleation. Through full morphology analysis and structural characterization, reasonable growth mechanisms of 3D hollow box TiO2 nanocrystals were proposed, including nucleation dissolution, Oswald ripening, and hydrolysis reactions. It was found that the high energy (001) crystal facets exposure ratio was closely correlated with reaction temperature of four nucleation-methods, which even reached 92% for the first time. Under simulated sunlight irradiation, their hydrogen production performance and photocatalytic degradation efficiency on model dye molecules rhodamine B (RhB) and methylene blue (MB) were evaluated, and as-prepared hollow box TiO2 nanocrystals prepared by the sonic solvothermal method exhibited the best photocatalytic performance, with a hydrogen production rate of 93.88 μmol/g/h. Within 70 min, the photocatalytic degradation rates of RhB and MB reached 96.59 and 75.25%, respectively, which were 5.74 and 5.54 times that of P25. Their properties are closely connected with the orderly cubic and hierarchy configuration structure of hollow box TiO2 nanocrystals, which have a high exposure ratio of (001) facet controlled by reaction temperatures, thereby greatly improving the photocatalytic activity. This study provides a classic reference for improving the properties of hollow box TiO2 nanocrystals through structural diversity design and various methods of nanocrystal growth.

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.

Fabrication of Z-Type TiN@(A,R)TiO2 Plasmonic Photocatalyst with Enhanced Photocatalytic Activity

Plasmonic effect-enhanced Z-type heterojunction photocatalysts comprise a promising solution to the two fundamental problems of current TiO₂-based photocatalysis concerning low-charge carrier separation efficiency and low utilization of solar illumination. A plasmonic effect-enhanced TiN@anatase-TiO₂/rutile-TiO₂ Z-type heterojunction photocatalyst with the strong interface of the N-O chemical bond was synthesized by hydrothermal oxidation of TiN. The prepared photocatalyst shows desirable visible light absorption and good visible-light-photocatalytic activity. The enhancement in photocatalytic activities contribute to the plasma resonance effect of TiN, the N-O bond-connected charge transfer channel at the TiO₂/TiN heterointerface, and the synergistically Z-type charge transfer pathway between the anatase TiO₂ (A-TiO₂) and rutile TiO₂ (R-TiO₂). The optimization study shows that the catalyst with a weight ratio of A-TiO₂/R-TiO₂/TiN of approximately 15:1:1 achieved the best visible light photodegradation activity. This work demonstrates the effectiveness of fabricating plasmonic effect-enhanced Z-type heterostructure semiconductor photocatalysts with enhanced visible-light-photocatalytic activities.

Surface Coordination of Pd/ZnIn2S4 toward Enhanced Photocatalytic Activity for Pyridine Denitrification

New surface coordination photocatalytic systems that are inspired by natural photosynthesis have significant potential to boost fuel denitrification. Despite this, the direct synthesis of efficient surface coordination photocatalysts remains a major challenge. Herein, it is verified that a coordination photocatalyst can be constructed by coupling Pd and CTAB-modified ZnIn₂S₄ semiconductors. The optimized Pd/ZnIn₂S₄ showed a superior degradation rate of 81% for fuel denitrification within 240 min, which was 2.25 times higher than that of ZnIn₂S₄. From the in situ FTIR and XPS spectra of 1% Pd/ZnIn₂S₄ before and after pyridine adsorption, we find that pyridine can be selectively adsorbed and form Zn⋅⋅⋅C-N or In⋅⋅⋅C-N on the surface of Pd/ZnIn₂S₄. Meanwhile, the superior electrical conductivity of Pd can be combined with ZnIn₂S₄ to promote photocatalytic denitrification. This work also explains the surface/interface coordination effect of metal/nanosheets at the molecular level, playing an important role in photocatalytic fuel denitrification.

Dielectric barrier discharge plasma-assisted modification of g-C3N4/Ag2O/TiO2-NRs composite enhanced photoelectrocatalytic activity

Dielectric barrier discharge (DBD) plasma applied as surface treatment technology was employed for the modification of Ag₂O and graphitic carbon nitride (g-C₃N₄) powders. Subsequently, the pretreated powders were sequentially loaded onto TiO₂ nanorods (TiO₂-NRs) via electro-deposition, followed by calcination at N₂ atmosphere. The results indicated that at the optimal plasma discharge time of 5 min for modification of g-C₃N₄ and Ag₂O, photocurrent density of ternary composite was 6 times to bare TiO₂-NRs under UV-visible light irradiation. Phenol was degraded by using DBD plasma-modified g-C₃N₄/Ag₂O/TiO₂-NRs electrode to analyze the photoelectrocatalytic performance. The removal rate of phenol for g-C₃N₄-5/Ag₂O-5/TiO₂-NRs electrode was about 3.07 times to that for TiO₂-NRs electrode. During active species scavengers' analysis, superoxide radicals and hydroxyl radicals were the main oxidation active species for pollutants degradation. A possible electron-hole separation and transfer mechanism of ternary composite with high photoelectrocatalytic performance was proposed.

Degradation of organophosphorus flame retardant tri(chloro-propyl)phosphate (TCPP) by (001) crystal plane of TiO2 photocatalysts

This paper demonstrates the successful synthesis of TiO₂ with (001) crystal plane; its morphology and structure were characterized using XRD, TEM and Raman spectrometer. The results showed that TiO₂ nanosheets were bounded by (001) facets on both the top and bottom. TiO₂-001/UV photocatalytic process was proved to be a powerful method for degrading tri(chloro-propyl) phosphate (TCPP) in aqueous solution. Under the given parameters, 95% of TCPP was removed in 360 min. The photodegradation followed the pseudo-first-order kinetic reaction. The reactive species during photocatalytic oxidation of TiO₂-001 was mainly hydroxyl radical. TCPP was decomposed into small molecule organics by hydroxyl radicals, along with the release of PO43- and Cl^-, and most of these intermediates were eventually degraded into carbon dioxide and water.

Construction of Bi2MoO6/CdS heterostructures with enhanced visible light photocatalytic activity for fuel denitrification

In this work, a novel step-scheme (S-scheme) Bi₂MoO₆/CdS heterojunction (HJ) photocatalyst (PC) was successfully prepared by a two-step solvothermal method for the first time. One-dimensional CdS nanorods were prepared by a simple solvothermal method as a synthesis template. Then, a Bi₂MoO₆ precursor was added to obtain a series of Bi₂MoO₆/CdS HJ composite catalytic materials with different morphologies. The photocatalytic performance of the catalyst was investigated by simulating fuel denitration as a probe reaction under visible light excitation (>420 nm). When compared with pure Bi₂MoO₆ and CdS, the 0.65-Bi₂MoO₆/CdS composite shows the highest photocatalytic activity for pyridine degradation. Degradation of pyridine reached 81% after 240 min of visible light excitation. The degradation rate of 0.65-Bi₂MoO₆/CdS reached 0.4471 h^-1, which was 1.8 and 3.2 times higher than that of CdS (0.2493 h^-1) and Bi₂MoO₆ (0.1427 h^-1), respectively. Combined with a series of characterisation results, the improvement in pyridine degradation activity was mainly attributed to (1) the S-scheme HJ structure between Bi₂MoO₆ and CdS, which greatly promoted the separation of photogenerated electrons and holes while retaining its strong redox ability, (2) the large specific surface area, which provided abundant active sites and efficient adsorption performance and catalytic performance, and (3) the special morphology, which induced multiple reflections of light, thereby improving absorption and utilisation of light. Moreover, after four cycles of pyridine denitrification, the samples still exhibited high activity, indicating good stability and recyclability of the composite catalyst. These findings provide a basis for the development of composite PCs for efficient fuel denitration under visible light irradiation.

Recycling of spent alkaline Zn-Mn batteries directly: Combination with TiO2 to construct a novel Z-scheme photocatalytic system

Recycling of spent alkaline Zn-Mn batteries (S-AZMB) has always been a focus of attention in environmental and energy fields. However, the current research mostly concentrated in the recovery of purified materials, and ignores the direct reuse of S-AZMB. Herein, we propose a new concept for the first time that unpurified S-AZMB can be used as raw materials for preparation of Z-scheme photocatalytic system in combination with TiO₂. A series of characterizations and experiments confirm that the combination with S-AZMB not only extends the response of TiO₂ to visible light, but also significantly enhances the separation ability of photogenerated electron-hole pairs. In the toluene removal experiment, the degradation kinetic rate of Z-scheme TiO₂@S-AZMB photocatalyst reaches 21.0 and 10.5 times than that of TiO₂ and S-AZMB, respectively. More notably, this S-AZMB based Z-scheme photocatalyst can maintain structural and photocatalytic performance stability in cyclic catalytic reactions. We believe that this work not only expands the research concept of recycling S-AZMB, but also provides a new idea for designing highly efficient Z-scheme photocatalysts.

TiO2/Fe2O3 heterostructures with enhanced photocatalytic reduction of Cr(vi) under visible light irradiation

We report a study on the synthesis of TiO₂/Fe₂O₃ (TF) nanocomposites and their photocatalytic performance under visible-light irradiation. The characterization of structure and morphology shows that hematite Fe₂O₃ was deposited on anatase TiO₂ nanoparticles with particle sizes in the range of 20–100 nm. In contrast to pure TiO₂ and pure Fe₂O₃, the nanocomposites exhibited remarkable photocatalytic activity. For example, the photoreduction efficiency of TF0.5 reaches 100% for a 100 ppm Cr(vi) solution within 160 minutes. The photochemical properties were studied by various methods. Finally, we conclude that the excellent performance of the photocatalysts is mainly attributed to two aspects: the enhanced absorption of visible light and the synergistic effect of an internal electric field at the heterojunction and citric acid for promoting the separation of electron–hole pairs.

A TiO₂/Fe₂O₃ heterojunction with an internal electric field was constructed for enhancing photocatalytic reduction efficiency of Cr(vi).

Photocatalytic Oxidation of Acetone Over High Thermally Stable TiO2 Nanosheets With Exposed (001) Facets

Anatase TiO₂ (A-TiO₂) usually exhibits superior photocatalytic activity than rutile TiO₂ (R-TiO₂). However, the phase transformation from A-TiO₂ to R-TiO₂ will inevitably happens when the calcination temperature is up to 600°C, which hampers the practical applications of TiO₂ photocatalysis in hyperthermal situations. In this paper, high energy faceted TiO₂ nanosheets (TiO₂-NSs) with super thermal stability was prepared by calcination of TiOF₂ cubes. With increase in the calcination temperature from 300 to 600°C, TiOF₂ transforms into TiO₂ hollow nanoboxes (TiO₂-HNBs) assembly from TiO₂-NSs via Ostwald Rippening process. Almost all of the TiO₂-HNBs are disassembled into discrete TiO₂-NSs when calcination temperature is higher than 700°C. Phase transformation from A-TiO₂ to R-TiO₂ begins at 1000°C. Only when the calcination temperature is higher than 1200°C can all the TiO₂-NSs transforms into R-TiO₂. The 500°C-calcined sample (T500) exhibits the highest photoreactivity toward acetone oxidation possibly because of the production of high energy TiO₂-NSs with exposed high energy (001) facets and the surface adsorbed fluorine. Surface oxygen vacancy, due to the heat-induced removal of surface adsorbed fluoride ions, is responsible for the high thermal stability of TiO₂-NSs which are prepared by calcination of TiOF₂ cubes.

One-step topological preparation of carbon doped and coated TiO2 hollow nanocubes for synergistically enhanced visible photodegradation activity

Various three-dimensional TiO₂ hollow structures have attracted strong scientific and technological attention due to their excellent properties. 3D hierarchical TiO₂ hollow nanocubes (TiO₂-HNBs) are not good candidates for industrial photocatalytic applications due to their large energy gap which is only activated by UV light. Herein, visible-light-responsive carbon doped and coated TiO₂-HNBs (C@TiO₂-HNBs) with a dominant exposure of {001} facets have been prepared via a template-engaged topotactic transformation process using facile one-step solvothermal treatment and a solution containing ethanol, glucose and TiOF₂. The effects of reaction time and glucose/TiOF₂ mass ratio on the structure and performance of C@TiO₂-HNBs were systematically studied. We found that glucose played an important role in providing H₂O during the topological transformation from self-templated TiOF₂ cubes into 3D hierarchical TiO₂ hollow nanocubes versus dehydration reactions, where its main function was as a carbon source. Coated carbon was deposited predominantly on the surface as sp² graphitic carbon in extended p conjugated graphite-like environments, and doped carbon mainly replaced Ti atoms in the surface lattice to form a carbonate structure. The results were confirmed using TEM SEM, EDS, XRD, FT-IR, XPS and Raman spectroscopic studies. The C@TiO₂-HNBs achieved greatly improved RhB photodegradation activity under visible light irradiation. The catalyst prepared with glucose/TiOF₂ at a mass ratio of 0.15 (T24-0.15) showed the highest photodegradation rate of 96% in 40 min, which is 7.0 times higher than those of the TiO₂-HNBs and P25. This new synthetic approach proposes a novel way to construct carbon hybridized 3D hierarchical TiO₂ hollow nanocubes by combining two modification methods, “element doped” and “surface sensitized”, at the same time.

Herein, visible-light-responsive carbon doped and coated TiO₂-HNBs have been prepared via a template-engaged topotactic transformation process.