Structure, synthesis, and catalytic properties of nanosize cerium-zirconium-based solid solutions in environmental catalysis

Pd Single-Atom Loaded Ce-Zr Solid Solution Catalysts Prepared by Flame Spray Pyrolysis for Efficient CO Catalytic Oxidation

Single-atom catalysts (SACs) exhibit remarkable catalytic activity at each metal site. However, conventionally synthesized single-atom catalysts often possess low metal loading, thereby constraining their overall catalytic performance. Here, a flame spray pyrolysis (FSP) method for the synthesis of a single-atom catalyst with a high loading capacity of up to 1.4 wt.% in practice is reported. CeZrO2 acts as a carrier and provides a large number of anchoring sites, which promotes the high-density generation of Pd, and the strong interaction between the metal and the support avoids atom aggregation. Pd-CeZrO2 series catalysts have excellent CO oxidation performance. When 0.97 wt.% Pd is added, the catalytic activity is the highest, and the temperature can be reduced to 120 °C. This work presented here demonstrates that FSP, as an inherently scalable technique, allows for elevating the single-atom loading to achieve an increase in its catalytic performance. The method presented here more options for the preparation of SACs.

Abundance of Low-Energy Oxygen Vacancy Pairs Dictates the Catalytic Performance of Cerium-Stabilized Zirconia

Cerium-stabilized zirconia (Ce1-xZrxOy, CZO) is renowned for its superior oxygen storage capacity (OSC), a key property long believed to be beneficial to catalytic oxidation reactions. However, 50% Ce-containing CZO recorded with the highest OSC has disappointingly poor performance in catalytic oxidation reactions compared to those with higher Ce contents but lower OSC ability. Here, we employ global neural network (G-NN)-based potential energy surface exploration methods to establish the first ternary phase diagram for bulk structures of CZO, which identifies three critical compositions of CZO, namely, 50, 60, and 80% Ce-containing CZO that are thermodynamically stable under typical synthetic conditions. 50% Ce-containing CZO, although having the highest OSC, exhibits the lowest O vacancy (Ov) diffusion rate. By contrast, 60% Ce-containing CZO, despite lower OSC (33.3% OSC compared to that of 50% Ce-containing CZO), reaches the highest Ov diffusion ability and thus offers the highest CO oxidation catalytic performance. The physical origin of the high performance of 60% Ce-containing CZO is the abundance of energetically favorable Ov pairs along the ⟨110⟩ direction, which reduces the energy barrier of Ov diffusion in the bulk and promotes O2 activation on the surface. Our results clarify the long-standing puzzles on CZO and point out that 60% Ce-containing CZO is the most desirable composition for typical CZO applications.

Hydrocarbon adsorption mechanism of modern automobile engines and methods of reducing hydrocarbon emissions during cold start process: A review

With the global emphasis on environmental protection and increasingly stringent emission regulations for internal combustion engines, there is an urgent need to overcome the problem of large hydrocarbon (HC) emissions caused by unstable engine cold starts. Synergistic engine pre-treatment (reducing hydrocarbon production) as well as after-treatment devices (adsorbing and oxidizing hydrocarbons) is the fundamental solution to emissions. In this paper, the improvement of hydrocarbon emissions is summarized from two aspects: pre-treatment and after-treatment. The pre-treatment for engine cold start mainly focuses on summarizing the intake control, fuel, and engine timing parameters. The after-treatment mainly focuses on summarizing different types of adsorbents and modifications (mainly including different molecular sieve structures and sizes, preparation conditions, silicon aluminum ratio, ion exchange modification, and heterogeneity, etc.), adsorptive catalysts (mainly including optimization of catalytic performance and structure), and catalytic devices (mainly including coupling with thermal management equipment and HC trap devices). In this paper, a SWOT (strength, weakness, opportunity, and threat) analysis of pre-treatment and after-treatment measures is conducted. Researchers can obtain relevant research results and seek new research directions and approaches for controlling cold start HC emissions.

Ceo2 /Cus Nanoplates Electroreduce Co2 to Ethanol with Stabilized Cu+ Species

Copper-based electrocatalysts effectively produce multicarbon (C2+ ) compounds during the electrochemical CO2 reduction (CO2 RR). However, big challenges still remain because of the chemically unstable active sites. Here, cerium is used as a self-sacrificing agent to stabilize the Cu+ of CuS, due to the facile Ce3+ /Ce4+ redox. CeO2 -modified CuS nanoplates achieve high ethanol selectivity, with FE up to 54% and FEC2+ ≈ 75% in a flow cell. Moreover, in situ Raman spectroscopy and in situ Fourier-transform infrared spectroscopy indicate that the stable Cu+ species promote CC coupling step under CO2 RR. Density functional theory calculations further reveal that the stronger * CO adsorption and lower CC coupling energy, which is conducive to the selective generation of ethanol products. This work provides a facile strategy to convert CO2 into ethanol by retaining Cu+ species.

Impact of Ce/Zr Ratio in the Nanostructured Ceria and Zirconia Composites on the Selective CO2 Adsorption

High surface-area, mesoporous CeO2, ZrO2, and Ce-Zr composite nanoparticles were developed using the hydrothermal template-assisted synthesis method. Samples were characterized using XRD, N2 physisorption, TEM, XPS, and FT-IR spectroscopic methods. The CO2 adsorption ability of the obtained materials was tested under dynamic and equilibrium conditions. A high CO2 adsorption capacity in CO2/N2 flow or CO2/N2/H2O was determined for all studied adsorbents depending on their composition flow. A higher CO2 adsorption was registered for Ce-Zr composite nanomaterials due to the presence of strong O2- base sites and enriched surface oxygen species. The role of the Ce/Zr ratio is the process of the formation of highly active and selective adsorption sites is discussed. The calculated heat of adsorption revealed the processes of chemisorption and physisorption. Experimental data could be appropriately described by the Yoon-Nelson kinetic model. The composites reused in five adsorption/desorption cycles showed a high stability with a slight decrease in CO2 adsorption capacities in dry flow and in the presence of water vapor.

Effect of catalyzed diesel particulate filter and its catalyst loading on emission characteristics of a non-road diesel engine

In this study, the effects of a diesel oxidation catalyst (DOC) coupled with a catalyzed diesel particulate filter (CDPF) with different catalyst loadings on the power, fuel consumption, gaseous and particulate emissions from a non-road diesel engine were investigated. Results showed that the after-treatment had a negligible effect on the power and fuel consumption. The reduction effect of the DOC on the CO and hydrocarbon (HC) increased with the engine load. Further reductions occurred coupling with the CDPF. Increasing the catalyst loading resulted in a more significant reduction in the HC emissions than CO emissions. The DOC could increase the NO₂ proportion to 37.9%, and more NO₂ was produced when coupled with the CDPF below 250°C; above 250°C, more NO₂ was consumed. The after-treatment could reduce more than 99% of the particle number (PN) and 98% of the particle mass (PM). Further reductions in the PN and PM occurred with a higher CDPF catalyst loading. The DOC had a better reduction effect on the nucleation particles than the accumulation ones, but the trend reversed with the CDPF. The DOC shifted the particle size distribution (PSD) to larger particles with an accumulation particle proportion increasing from 13% to 20%, and the geometric mean diameter (GMD) increased from 18.2 to 26.0 nm. The trend reversed with the CDPF and the accumulation particle proportion declined to less than 10%. A lower catalyst loading on the CDPF led to a higher proportion of nucleation particles and a smaller GMD.

Synergistic effect of F and triggered oxygen vacancies over F-TiO2 on enhancing NO ozonation

Oxidation-absorption technology is a key step for NO_x removal from low-temperature gas. Under the condition of low O₃ concentration (O₃/NO molar ratio = 0.6), F-TiO₂ (F-TiO₂), which is cheap and environmentally friendly, has been prepared as ozonation catalysts for NO oxidation. Catalytic activity tests performed at 120°C showed that the NO oxidation efficiency of F-TiO₂ samples was higher than that of TiO₂ (about 43.7%), and the NO oxidation efficiency of F-TiO₂-0.15 was the highest, which was 65.3%. Combined with physicochemical characteristics of catalysts and the analysis of active species, it was found that there was a synergistic effect between F sites and oxygen vacancies on F-TiO₂, which could accelerate the transformation of monomolecular O₃ into multi-molecule singlet oxygen (¹O₂), thus promoting the selective oxidation of NO to NO₂. The oxidation reaction of NO on F-TiO₂-0.15 follows the Eley-Rideal mechanism, that is, gaseous NO reacts with adsorbed O₃ and finally form NO₂.

Enhancement of performance and sulfur resistance of Si-doped V/W/Ti using sulfation for selective catalytic reduction of NOx with ammonia

The SO₂ resistance improvement factor was confirmed to form Si²⁺(Si-O-Ti) species.In the optimised V/SiW/TiO₂ catalyst; the incoming SO₂ was converted to Si(SO₄).The formation of Si(SO₄) increased active sites for adsorbed NH₃, in the form of SO₄-NH₃ to improve denitrification efficiency.

Mesoporous crystalline Ti1-xSnxO2 (0 < x < 1) solid solution for a high-performance photocatalyst under visible light irradiation

We report a facile and effective inorganic polycondensation combined with aerosol-spray strategy towards high-performance photocatalyst by fabricating mesoporous Ti_1-xSn_xO₂ (0 < x < 1) solid solution. Such Ti_1-xSn_xO₂ nanocrystals with high Sn-doped contents are self-assembled into mesoporous spheres can effectively promote visible-light harvest and high quantum yield, leading a longer lifetime of the photoelectron-hole pairs and less recombination. Such the photocatalysts enhanced photocatalytic activity for the degradation of Rhodamine B (RhB). The representative Ti_0.9Sn_0.1O₂ and Ti_0.8Sn_0.2O₂ compounds reach an optimum degradation of ≈50% and 70%, respectively, after 120 min irradiation under visible irradiation. The mesoporous Ti_1-xSn_xO₂ solid solution could inhibit the recombination of electron-hole pairs, which promote reaction thermodynamics and kinetics for RhB degradation.

Brønsted acid enhanced hexagonal cerium phosphate for the selective catalytic reduction of NO with NH3: In situ DRIFTS and DFT investigation

The possible effect of optimized acid sites on NH₃-SCR performance and the fundamental mechanism are barely illustrated. In this work, we report two model catalysts of hexagonal (h-CPO) and monoclinic (m-CPO) cerium phosphate with disparate acidity that show different NH₃-SCR activities under the same reaction conditions. Brønsted acid sites were found to be crucial for NH₃-SCR performance at both low and high temperature. The electron localization discrepancy of h-CPO was more pronounced as compared with m-CPO, leading to the enrichment of P-OH (Brønsted acid site) which could strongly absorb NH₃ and then generate NH₄⁺ to participate in fast SCR via Langmuir-Hinshelwood mechanism, resulting in good activity at low temperature. The zeolitic water stored in the open channels of h-CPO could be released as supplement for P-OH sites which prevent the depletion and non-selective oxidation of NH₃ thus maintaining its high activity at high temperature via the Eley-Rideal mechanism. Meanwhile, as DFT calculation revealed, cerium is the electron deficient center which can easily fix NO and NO₂ from the intake, generating active NO_2(ad) or nitrites and facilitating fast SCR by reacting with NH₄⁺ species. Hence, the superior protonation ability to form P-OH and low energy barrier to generate active nitrites of h-CPO led its T₈₀ NO_x conversion to a broaden temperature of 150-450 ^oC under high GHSV of 177,000 h^-1. Furthermore, experimental and DFT calculation also demonstrated that the enriched Brønsted acid sites over h-CPO have largely suppressed SO₂ adsorption_, thus significantly reducing the formation of metal sulfates and achieving great SO₂ resistance. The ammonium sulfate deposits can be storage of NH₃, supplying additional reductant to promote high temperature activity and selectivity.

Zirconia aerogels for thermal management: Review of synthesis, processing, and properties information architecture

Zirconia aerogels are porous nanomaterials with high specific surface areas and low thermal conductivities that are suitable for a wide range of functions. The applications of zirconia aerogels include numerous uses in thermal management systems that are specifically beneficial in aeronautics and aerospace systems. This review seeks to detail the synthesis, processing, and characterization of these unique materials. However, the many distinctive synthesis pathways and processing conditions of zirconia aerogels can make the optimization of these materials difficult, potentially inhibiting further development. Independent variables in the synthesis process alone include zirconium precursor, rare earth stabilizer, solvent system, gelation agent, and surfactant templating agent. If only two distinct options were available for each synthetic variable, there would be up to 32 different synthetic pathways; if there were three options for each variable, 243 different synthetic pathways would be possible. Apart from the gel synthesis, processing conditions, including drying method, drying temperature, drying solvent, and sintering temperature, as well as various techniques used to characterize aerogels, need to be considered. To mitigate the sheer volume of synthetic parameters, this review uses an architected information structure to contemplate approximately 600 aerogel materials, along with the synthesis and processing conditions that make each material unique. By utilizing this information structure, containing over 10,000 relationships amongst 3,800 nodes, the connection between specific properties of zirconia aerogels and the pathways used to produce them can be more easily visualized, leading to a more effective understanding of the many variables that are used in the synthesis and processing of these materials. This review seeks to utilize data science in a way that can elucidate structure-property relationships in colloidal chemistry, providing a more efficient way to evaluate the synthesis and processing of materials with high experimental dimensionality.

Atomic layer deposition of silica to improve the high-temperature hydrothermal stability of Cu-SSZ-13 for NH3 SCR of NOx

The improvement of stability is a crucial and challenging issue for industrial catalyst, which affects not only the service time but also the cost of catalyst. This is especially prominent for that applied in harsh environment atmospheres, such as the exhaust of diesel vehicles. Herein, we reported a new strategy to improve the high-temperature hydrothermal stability of Cu-SSZ-13, which is a promising catalyst for the treatment of exhaust emitted from diesel vehicles through the NH₃-SCR NO_x route. Different from that reported in literature, we managed to improve the high-temperature hydrothermal stability of Cu-SSZ-13 by coating the surface with a nanolayer of stable SiO₂ material using the atomic layer deposition (ALD) method. The coating of SiO₂ layers effectively suppressed the leaching of alumina from the SSZ-13 molecular sieve even after the hydrothermal aging at 800 °C for 16 h with 12.5% water in air. Meanwhile, the ultra-thin SiO₂ nanolayer does not block the pores of zeolites and affect the catalytic activity of Cu-SSZ-13 contribute to the superiority of the ALD technology.

Facile synthesis of Pt-Ce0.63Zr0·37O2-Y catalysts and the application in catalytic oxidation of toluene

In this work, a series of Pt-Ce_0.63Zr_0·37O₂-Y catalysts were prepared by unique simple mechanical mixing method. The catalytic activity of these catalysts for toluene oxidation was investigated. The physicochemical properties of the catalysts were characterized by XRD, ICP-MS, SEM, TEM, XPS and N₂ sorption. Pore size distribution was analyzed according nitrogen adsorption and desorption isotherms. The catalytic results showed that using NaY as support for Pt-Ce_0.63Zr_0·37O₂-Y could enhance the conversion of toluene during the oxidation process in comparison with HY. Further mixing cerium zirconium solid solution with Pt-NaY can improve the oxidation catalytic property of these catalysts. The conversion of toluene over Pt-Ce_0.63Zr_0·37O₂-NaY reached more than 90% at 200 °C. High catalytic stability was obtained for toluene oxidation over Pt-Ce_0.63Zr_0·37O₂-NaY. Platinum, cerium and zirconium can be uniformly dispersed on Y zeolite with small particle size by simple mechanical synthesis. The effect of drying methods on catalytic activity and hydrothermal stability of catalysts were also investigated in this research.

Effects of La incorporation in catalytic activity of Ag/La-CeO2 catalysts for soot oxidation

Owing to strengthened regulations toward vehicle emissions, the use of diesel particulate filter technology to reduce particulate matter emissions has attracted significant attention. To achieve low temperature oxidation of particulate matter, numerous studies on Ag/CeO₂ catalysts for soot oxidation have been reported. Herein, Ag/La-CeO₂ catalysts with different La contents are synthesized and compared to analyze the effect of La. Hydrogen temperature programmed reduction analysis confirms that the reducibility increases with an increase in the La content in La-CeO₂. X-ray photoelectron spectroscopy and Raman analysis confirm an increase of oxygen vacancies with La doping. Accordingly, the soot oxidation performances estimated by temperature programmed oxidation experiments increase with La doping. However, the catalytic activity of Ag/La-CeO₂ exhibits a volcano trend. When an appropriate amount of La is incorporated in Ag/CeO₂, peroxide generation and reducibility improve, thereby enhancing the soot oxidation performance. Conversely, the catalytic activities gradually decrease with excess La-doping. Scanning transmission electron microscopy analysis and density functional theory calculations confirm that excess amounts of La induce the sintering of Ag particles, which lead to the degradation of peroxide generation and reducibility of the catalysts. Consequently, an optimal amount of La incorporation on Ag/La-CeO₂ results in the best soot oxidation performance.

O3 oxidation combined with semi-dry method for simultaneous desulfurization and denitrification of sintering/pelletizing flue gas

With the vigorous development of China's iron and steel industry and the introduction of ultra-low emission policies, the emission of pollutants such as SO₂ and NO_x has received unprecedented attention. Considering the increase of the proportion of semi-dry desulfurization technology in the desulfurization process, several semi-dry desulphurization technologies such as flue gas circulating fluidized bed (CFB), dense flow absorber (DFA) and spray drying absorption (SDA) are briefly summarized. Moreover, a method for simultaneous treatment of SO₂ and NO_x in sintering/pelletizing flue gas by O₃ oxidation combined with semi-dry method is introduced. Meantime, the effects of key parameters such as O₃/NO molar ratio, CaSO₃, SO₂, reaction temperature, Ca/(S+2N) molar ratio, droplet size and approach to adiabatic saturation temperature (AAST) on denitrification and desulfurization are analyzed. Furthermore, the reaction mechanism of denitrification and desulfurization is further elucidated. Finally, the advantages and development prospects of the new technology are proposed.

Highly Active and Stable Palladium Catalysts on Novel Ceria-Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Precious metal catalysts with superior low-temperature activity and excellent thermal stability are highly needed in environmental catalysis field. In this work, a novel two-step incipient wetness impregnation (T-IWI) method was developed for the fabrication of a unique and highly stable CeO₂/Al₂O₃ support (CA-T). Pd anchored on CA-T exhibited a much higher low-temperature catalytic activity and superior thermal stability in carbon monoxide (CO) and hydrocarbon (HC) oxidations, compared to Pd anchored on conventional CeO₂/Al₂O₃ (CA), which was prepared by a one-step IWI method. After aging treatment at 800 °C, the CO oxidation rate on Pd/CA-T (1.69 mmol/(g_Pd s)) at 120 °C was 4.1 and 84.5 times of those on Pd/CA (0.41 mmol/(g_Pd s)) and Pd/Al₂O₃ (0.02 mmol/(g_Pd s)), respectively. It was revealed that the CA-T support with well-controlled small CeO₂ particles (ca. 12 nm) possessed abundant defects for Pd anchoring, which created rich Pd-CeO₂ interfaces with strengthened interaction between Pd and CeO₂ where oxygen could be efficiently activated. This resulted in the significantly improved oxidation activity and thermal stability of Pd/CA-T catalysts. The T-IWI method developed herein can be applied as a universal approach to prepare highly stable metal oxide-alumina-based supports, which have broad application in environmental catalyst design, especially for automobile exhaust aftertreatment.

Low-Temperature Selective Catalytic Reduction of NO x with NH3 over Mn-Ce Composites Synthesized by Polymer-Assisted Deposition

The Mn _x Ce _y binary catalysts with a three-dimensional network structure were successfully prepared via a polymer-assisted deposition method using ethylenediaminetetraacetic acid and polyethyleneimine as complexing agents. The developed pore structure could facilitate the gas diffusion and accelerate the catalytic reaction for NH₃ selective catalytic reduction (SCR). Moreover, the addition of Ce is beneficial for the exposure of active sites on the catalyst surface and increases the adsorption of the NH₃ and NO species. Therefore, the Mn₁Ce₁ catalyst exhibits the best catalytic activity for NO _x removal with a conversion rate of 97% at 180 °C, superior water resistance, and favorable stability. The SCR reaction over the Mn₁Ce₁ catalyst takes place through the E-R pathway, which is confirmed by the in situ diffuse reflectance Fourier transform analysis. This work explores a new strategy to fabricate multimetal catalysts and optimize the structure of catalysts.

Construction of Superhydrophobic Ru/TiCeOx Catalysts for the Enhanced Water Resistance of o-Dichlorobenzene Catalytic Combustion

In this paper, a simple method to enhance the H₂O resistance of Ru/TiCeO_x catalysts for o-DCB catalytic combustion by constructing superhydrophobic coating of phenyltriethoxysilane (PhTES) was proposed. The effect of PhTES content on the pore structure, specific surface area, H₂O resistance, contact angle (CA) value, and catalytic activity of the catalyst was studied. When water was added, the pristine Ru/TiCeO_x catalytic activity decreased by about 26%, while the Ru/TiCeO_x-16Ph activity hardly decreased. According to the analysis results of XRD, FT-IR, SEM, and CA, PhTES was closely coated on the surface of Ru/TiCeO_x to produce a more hydrophobic surface. The Ru/TiCeO_x-16Ph catalyst had strong hydrophobicity, and the contact angle was 159.8°, which not only significantly enhanced the water resistance and self-cleaning activity but also showed a good elimination temperature (T₉₀ = 341 °C) for the o-DCB. The enhanced water resistance of Ru/TiCeO_x-XPh catalysts resulted from the reduction of the active centers consumed (water occupying oxygen vacancy sites). The reaction mechanism of the Ru/TiCeO_x-16Ph catalyst based on surface oxygen species and the Deacon reaction was proposed. This method provided new idea for the design of a new water-resistant composite catalyst and promoted the practical application of the composite catalyst in the catalytic oxidation of o-DCB.

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al₂O₃ at 200 °C can controllably dope Al cations into the shape-engineered CeO₂ nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). The substituted Al³⁺ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO₂ NRs. These Al³⁺ dopants form -Al-O-Ce-O- clusters, which are new Ce species and can be reversibly reduced and oxidized at 500-700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

Ce-Mn coordination polymer derived hierarchical/porous structured CeO2-MnOx for enhanced catalytic properties

Catalytic performance is largely dependent on how the structures/compositions of materials are designed. Herein, CeO2-MnOx binary oxide catalysts with a hierarchical/porous structure are prepared by a facile and efficient method, which involves the preparation of the hierarchical Ce-Mn coordination polymer (CPs) precursor, followed by a thermal treatment step. The obtained CeO2-MnOx catalysts not only well inherit the hierarchical structure of Ce-Mn CPs, but also possess porous and hollow features due to the removal of organic ligands and heterogeneous contraction during the calcination process. In addition, the effect of the Mn/Ce ratio is also studied to optimize catalytic performance. Specifically, the as-prepared CeO2-MnOx (5 : 5) catalyst exhibits excellent catalytic performance toward CO oxidation and selective catalytic reduction (SCR) of NO with NH3 at low temperatures. Based on the characterization results, we propose that the special hierarchical structure, high surface area, strong synergistic interaction between CeO2 and MnOx, and high content of active Ce3+, Mn4+ and Osurf are collectively responsible for its remarkable catalytic performance.

Enhancement of the Generation and Transfer of Active Oxygen in Ni/CeO2 Catalysts for Soot Combustion by Controlling the Ni-Ceria Contact and the Three-Dimensional Structure

The effect of the three-dimensionally ordered macroporous (3DOM) structure and the Ni doping of CeO₂ on the physicochemical properties and catalytic activity for soot combustion was studied. Moreover, the way in which Ni is introduced to the ceria support was also investigated. For this, CeO₂ supports were synthesized with uncontrolled (Ref) and 3DOM-structured morphology, and their respective Ni/CeO₂ catalysts were prepared by impregnation of the previously synthesized supports or by successive impregnation of both precursors (Ni and Ce) on the 3DOM template. Conclusions reached in this study are: (1) the 3DOM structure increases the surface area of the catalysts and improves the catalyst-soot contact. (2) The doping of CeO₂ with Ni improves the catalytic activity because the NiO participates in the catalytic oxidation of NO to NO₂, and also favors the production of active oxygen and the catalyst oxygen storage capacity. (3) Ni incorporation method affects its physicochemical and catalytic properties. By introducing Ni by successive infiltration in the solid template, the CeO₂ crystal size is reduced, Ni dispersion is improved, and the catalyst reducibility is increased. All of these characteristics make the catalyst synthesized by successive infiltration to have higher catalytic activity for soot combustion than the Ni-impregnated CeO₂ catalyst.

Green synthesis of mesoporous MnNbOx oxide by a liquid induced self-assembly strategy for low-temperature removal of NOx

A highly porous MnNbO_x with excellent low-temperature NO_x reduction was fabricated by a facile, sustainable ionic liquid induced self-assembly strategy.