Density functional theory calculations on single atomic catalysis: Ti-decorated Ti3C2O2 monolayer (MXene) for HCHO oxidation

Efficient catalytic oxidation of formaldehyde by defective g-C3N4-anchored single-atom Pt: A DFT study

Indoor volatile formaldehyde is a serious health hazard. The development of low-temperature and efficient nonhomogeneous oxidation catalysts is crucial for protecting human health and the environment but is also quite challenging. Single-atom catalysts (SACs) with active centers and coordination environments that are precisely tunable at the atomic level exhibit excellent catalytic activity in many catalytic fields. Among two-dimensional materials, the nonmagnetic monolayer material g-C3N4 may be a good platform for loading single atoms. In this study, the effect of nitrogen defect formation on the charge distribution of g-C3N4 is discussed in detail using density functional theory (DFT) calculations. The effect of nitrogen defects on the activated molecular oxygen of Pt/C3N4 was systematically revealed by DFT calculations in combination with molecular orbital theory. Two typical reaction mechanisms for the catalytic oxidation of formaldehyde were proposed based on the Eley-Rideal (E-R) mechanism. Pt/C3N4-V3N was more advantageous for path 1, as determined by the activation energy barrier of the rate-determining step and product desorption. Finally, the active centers and chemical structures of Pt/C3N4 and Pt/C3N4-V3N were verified to have good stability at 375 K by determination of the migration energy barriers and ab initio molecular dynamics simulations. Therefore, the formation of N defects can effectively anchor single-atom Pt and provide additional active sites, which in turn activate molecular oxygen to efficiently catalyze the oxidation of formaldehyde. This study provides a better understanding of the mechanism of formaldehyde oxidation by single-atom Pt catalysts and a new idea for the development of Pt as well as other metal-based single-atom oxidation catalysts.

High-Throughput Screening Strategy for Electrocatalysts for Selective Catalytic Oxidation of Formaldehyde to Formic Acid

Electrocatalytic oxidation of formaldehyde (FOR) is an effective way to prevent the damage caused by formaldehyde and produce high-value products. A screening strategy of a single-layer MnO2-supported transition metal catalyst for the selective oxidation of formaldehyde to formic acid was designed by high-throughput density functional calculation. N-MnO2@Cu and MnO2@Cu are predicted to be potential FOR electrocatalysts with potential-limiting steps (PDS) of 0.008 and -0.009 eV, respectively. Electronic structure analysis of single-atom catalysts (SACs) shows that single-layer MnO2 can regulate the spin density of loaded transition metal and thus regulate the adsorption of HCHO (Ead), and Ead is volcanically distributed with the magnetic moment descriptor -|mM - mH|. In addition, the formula quantifies Ead and |mM - mH| to construct a volcano-type descriptor α describing the PDS [ΔG(*CHO)]. Other electronic and structural properties of SACs and α are used as input features for the GBR method to construct machine learning models predicting the PDS (R2 = 0.97). This study hopes to provide some insights into FOR electrocatalysts.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

First-principles study of hydrogen sulfide decomposition on Sc-Ti3C2O2 single-atom catalyst

CONTEXT

Hydrogen sulfide gas poses significant risks to both human health and the environment, with the potential to induce respiratory and neurological effects, and a heightened fatality risk at elevated concentrations. This article investigates the catalytic decomposition of H2S on a Sc-Ti3C2O2 single-atom catalyst(SAC) using the density functional theory-based first-principles calculation approach. Initially, the adsorption behavior of H2S on Ti3C2O2-MXene was examined, revealing weak physical adsorption between them. Subsequently, the transition metal atom Sc was introduced to the Ti3C2O2 surface, and its stability was studied, demonstrating high stability. Further exploration of H2S adsorption on Sc-Ti3C2O2 revealed direct dissociation of H2S gas molecules into HS* and H*, with HS* binding to Sc and H* binding to O on the Ti3C2O2 surface, resulting in OH groups. Using the transition state search method, the dissociation of H2S molecules on the SAC's surface was investigated, revealing a potential barrier of 2.45 eV for HS* dissociation. This indicates that the H2S molecule can be dissociated into H2 and S with the action of the Sc-Ti3C2O2 SAC. Moreover, the S atom left on the catalyst surface can aggregate to produce elemental S8, desorbing on the catalyst surface, completing the catalytic cycle. Consequently, the Sc-Ti3C2O2 SAC is poised to be an efficient catalyst for the catalytic decomposition of H2S.

METHODS

The Dmol3 module in Materials Studio software based on density functional theory is used in this study. The generalized gradient approximation method GGA-PBE is used for the exchange-correlation function. The complete LST/QST and the NEB methods in the Dmol3 module were used to study the minimum energy path of the dissociation of hydrogen sulfide molecules on the catalyst surface.

Density functional theory-based screening of Ti4C3O2-loaded single atoms for efficient selective catalytic oxidation of formaldehyde

Indoor formaldehyde (HCHO) pollution poses a major risk to human health. Low-temperature catalytic oxidation is an effective method for HCHO removal. The high activity and selectivity of single atomic catalysts provide a possibility for the development of efficient non-precious metal catalysts. In this study, the most stable single-atom catalyst Ti-Ti4C3O2 was screened by density functional theory among many single atomic catalysts with two-dimensional (2D) monolayer Ti4C3O2 as the support. The computational results show that Ti-Ti4C3O2 is highly selective to HCHO and O2 in complex environments. The HCHO oxidation reaction pathways are proposed based on the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanisms. According to the reaction energy and energy span models, the E-R mechanism has a lower maximum energy barrier and higher catalytic efficiency than the L-H mechanism. In addition, the stability of the Ti-Ti4C3O2 structure and active center was verified by diffusion energy barrier and ab initio molecular dynamics simulations. The above results indicate that Ti-Ti4C3O2 is a promising non-precious metal catalyst. The present study provides detailed theoretical insights into the catalytic oxidation of HCHO by Ti-Ti4C3O2, as well as an idea for the development of efficient non-precious metal catalysts based on 2D materials.

Gas-sensing properties of Ti, Zr, V, and Nb-modified Ti3C2O2 for decomposed gases in locomotive electric transformers: a DFT study

This study investigated the adsorption properties of the decomposed gases in locomotive electric transformers: C2H2, CH4, and CO on metal atoms (Ti, Zr, V, and Nb) modified Ti3C2O2 by DFT calculations. The optimal modification structures of metal atoms on Ti3C2O2 were calculated and band structure, adsorption energy, charge transfer, density of states, charge density diagrams, and recovery time were used to analyze the adsorption properties. The results showed that metal atom modifications could enhance the conductivity and surface activity. In the adsorption systems, gas received electrons, and the conductivity was changed after gas adsorption. The adsorption processes of CH4 on modified systems were physical and had an extremely short recovery time. However, new bonds were formed in the adsorption of C2H2 and CO resulting in long recovery times. In essence, Ti, Zr, V, and Nb-doped Ti3C2O2 can be used as gas-sensing materials for CH4 and as adsorbents for C2H2 and CO gases in locomotive electric transformers.

Unveiling the intrinsic role of water in the catalytic cycle of formaldehyde oxidation: a comprehensive study integrating density functional theory and microkinetic analysis

Previous research is predominantly in consensus on the reaction mechanism between formaldehyde (HCHO) and oxygen (O2) over catalysts. However, water vapor (H2O) always remains present during the reaction, and the intrinsic role of H2O in the oxidation of HCHO still needs to be fully understood. In this study, a single-atom catalyst, Al-doped C2N substrate, Al1/C2N, can be adopted as an example to investigate the relationship and interaction among O2, H2O, and HCHO. Density functional theory (DFT) calculations and microkinetic simulations were carried out to interpret the enhancement mechanism of H2O on HCHO oxidation over Al1/C2N. The outcome demonstrates that H2O directly breaks down a surface hydroxyl group on Al1/C2N, considerably lowering the energy required to form crucial intermediates, thus promoting oxidation. Without H2O, Al1/C2N cannot effectively oxidize HCHO at ambient temperature. During oxidation, H2O takes the major catalytic responsibility, delaying the entrance of O2 into the reaction, which is not only the product but also the crucial reactant to initiate catalysis, thereby sustaining the catalytic cycle. Moreover, this study predicts the catalytic behavior at various temperatures and presents feasible recommendations for regulating the reaction rates. The oxidation mechanism of HCHO is explained at the molecular level in this study, emphasizing the intrinsic role of water on Al1/C2N, which fills in the relevant studies for HCHO oxidation on two-dimensional carbon materials.

Efficient degradation of formaldehyde based on DFT-screened metal-doped C3N6 monolayer photocatalysts: performance evaluation and mechanistic insights

Photocatalytic oxidation is an efficient and promising technology for reducing indoor pollution levels of formaldehyde (HCHO). However, developing efficient and low-cost photocatalysts for the removal of HCHO remains challenging due to the time-consuming and expensive nature of traditional "trial and error" and "directed research" approaches. To achieve this goal, first-principles density functional theory (DFT) calculations were conducted to high-throughput screen candidate TM-C3N6 photocatalysts for high-performance degradation of HCHO. The results revealed that Zr-C3N6 and Hf-C3N6 in functionalizing C3N6 with 28 transition metals showed excellent adsorption energy of HCHO, boosting the highly effective capture of HCHO. Meanwhile, an excellent adsorption performance mechanism was further elicited by the electric structure-property relationship. In addition, reaction mechanisms for HCHO degradation and three potential reaction pathways for HCHO degradation were systematically evaluated. Our findings indicated that hydroxyl-assisted dehydrogenation and oxygen-assisted dehydrogenation are the most favorable pathways, with rate-limiting steps involving the formation of ˙OH and ˙O radicals. Overall, this study may provide new insights into a high-throughput screening of novel photocatalysts that are both high-performing and low-cost for the removal of formaldehyde. This, in turn, can accelerate the experimental development process and reduce the associated costs and time consumption.

Composite nanoarchitectonics with TiO2 nanocrystals and superior thin Ti3C2Tx nanosheets towards efficient NO removal

Accordion-like Ti₃C₂T_x MXene supplied a possibility to construct two-dimensional composites with novel performance. In this paper, few-layered Ti₃C₂T_x MXene was created via a chemical etching strategy. The oxidation in-situ using a powerful alkaline solution resulted successfully in TiO₂ nanocrystals grown on Ti₃C₂T_x nanosheets. The alkaline treatment adjusted terminations of the Ti₃C₂T_x MXene and controlled the oxidation degree by changing temperature. The ratio of Ti₃C₂T_x and TiO₂ was finally optimized. Because of Ti₃C₂T_x nanosheets with well conductivity and excellent light absorption as well as TiO₂ nanocrystal arrays on Ti₃C₂T_x nanosheets with a high specific surface area and more active sites, TiO₂/Ti₃C₂T_x composites revealed excellent photocatalystic activity, especially for NO removal. The improvement of separation and transfer efficiency of phootogenerated carriers is ascribed to the microstructure of TiO₂/Ti₃C₂T_x composites. The composite sample synthesized at 75 °C revealed the best NO removal efficiency, in which 70% of NO was removed at a concentration of 600 ppb. This study offers a new thought for preparing high performance MXene-based photocatalysts.

Visible light-driven NH2Cl activation by g-C3N4 photocatalysis producing reactive nitrogen species to degrade bisphenol A

The photolysis of monochloramine (NH₂Cl), a widely used disinfectant, under UVC irradiation produces different radicals for the micropollutant degradation. For the first time, this study demonstrates the degradation of bisphenol A (BPA) via the NH₂Cl activation by graphitic carbon nitride (g-C₃N₄) photocatalysis using visible light-LEDs at 420 nm, termed as the Vis₄₂₀/g-C₃N₄/NH₂Cl process. The process produces •NH₂, •NH₂OO, •NO and •NO₂ via the e_CB^-- and O₂^•--induced activation pathways and •NHCl and NHClOO• via the h_VB⁺-induced activation pathway. The produced reactive nitrogen species (RNS) enhanced 100% of the BPA degradation compared with the Vis₄₂₀/g-C₃N₄. Density functional theory calculations confirmed the proposed NH₂Cl activation pathways and further demonstrated that e_CB^-/O₂^•- and h_VB⁺ induced the cleavage of N-Cl and N-H bonds in NH₂Cl, respectively. The process converted 73.5% of the decomposed NH₂Cl to nitrogen-containing gas, compared with that of approximately 20% in the UVC/NH₂Cl process, leaving much less ammonia, nitrite and nitrate in water. Among different operating conditions and water matrices tested, of particular significance is natural organic matter of 5 mgDOC/L only reduced 13.1% of the BPA degradation compared against that of at least 46% reduction in the UVC/NH₂Cl process. Only 0.017-0.161 µg/L of disinfection byproducts were produced, two orders of magnitudes lower than that in the UVC/chlorine and UVC/NH₂Cl processes. The combined use of visible light-LEDs, g-C₃N₄ and NH₂Cl significantly improves the micropollutant degradation and reduces the energy consumption and byproduct formation of the NH₂Cl-based AOP.

Interfacial contact barrier and charge carrier transport of MoS2/metal(001) heterostructures

The rapid rise of two-dimensional (2D) materials has aroused increasing interest in the fields of microelectronics and optoelectronics; various types of 2D van der Waals heterostructures (vdWHs), especially those based on MoS₂, have been widely investigated in theory and experiment. However, the interfacial properties of MoS₂ and the uncommon crystal surface of traditional three-dimensional (3D) metals are yet to be explored. In this paper, we studied heterostructures composed of MoS₂ and metal(001) slabs, based on the first-principles calculations, and we uncovered that MoS₂/Au(001) and MoS₂/Ag(001) vdWHs reveal Schottky contacts, and MoS₂/Cu(001) belongs to Ohmic contact and possesses ultrahigh electron tunneling probability at the equilibrium distance. Thus, the MoS₂/Cu(001) heterostructure exhibits the best contact performance. Further investigations demonstrate that external longitudinal strain can modulate interfacial contact to engineer the Schottky-Ohmic contact transition and regulate interfacial charge transport. We believe that it is a general strategy to exploit longitudinal strain to improve interfacial contact performance to design and fabricate a multifunctional MoS₂-based electronic device.

Computational study on persulfate activation by two-dimensional carbon materials with various nitrogen proportions for carbamazepine oxidation in wastewater: The essential role of graphitic N atoms

Two-dimensional carbon materials with various N atom proportions (2D-CNMs) are constructed to clarify the optimal catalyst for carbamazepine (CBZ) oxidation and the inner mechanism for persulfate-based advanced oxidation processes (P-AOPs). Results show that peroxydisulfate (PDS) can be activated by all 2D-CNMs with the order of C₃N > C₇₁N > graphene > C₂N > CN, while C₃N is the only catalyst for peroxymonosulfate (PMS) activation. The C₃N with the maximum graphitic N can activate PDS and PMS in a wide temperature range at any pH, and demonstrates the optimal CBZ oxidation performance. Notably, the graphitic N atoms promote P-AOPs from five aspects: (i) electron structure, (ii) electrical conductivity, (iii) electron transfer from persulfate to catalysts, (iv) electron jump of co-system before and after activation, (v) interaction between catalyst and persulfate. The most vigorous activity of C₃N is attributed to the greatest number of graphitic N. This work clarifies the essential role of graphitic N atoms with implications for the catalyst design, and facilitates the environmental applications of P-AOPs for micropollutant abatement.

Selective catalytic oxidation of formaldehyde on single V- and Cr-atom decorated magnetic C4N3 substrate: A first principles study

Formaldehyde (HCHO) is the most common indoor hazardous pollutant and has attracted great concern because its long-term exposure has adverse health effects on humans. Retention and catalytic oxidation of highly hazardous HCHO is an efficient and environmentally friendly method to use for air remediation, but a major obstacle to this procedure is the lack of an appropriate catalyst. Herein, two-dimensional magnetic C₄N₃ material with a 3d-transition metal as activate sites was systemically investigated in HCHO oxidation using density functional theory calculations. The results show that V-C₄N₃ and Cr-C₄N₃ have high structural stability and shallow activation barriers for O₂ decomposition; these characteristics provide the necessary precursors for the subsequent oxidation reaction. Moreover, the V-C₄N₃ and Cr-C₄N₃ catalysts have unique selective adsorption and catalysis toward HCHO in a mixture of some typical in-door volatile organic compounds (VOCs) and air. The corresponding dynamic barrier for each reaction step was investigated and the mechanism involved in HCHO oxidation was revealed in detail. Aggregation of metal atoms in the V-C₄N₃ and Cr-C₄N₃ catalysts is prevented by enormous diffusion resistance, and this is further confirmed by AIMD simulations. These results provide insightful guidance for developing advanced magnetic catalysts for HCHO oxidation to improve the remediation of air contaminants.

Removal of Gaseous Volatile Organic Compounds by a Multiwalled Carbon Nanotubes/Peroxymonosulfate Wet Scrubber

In this study, a wet scrubber coupled with a persulfate-based advanced oxidation process [carbocatalysts/peroxymonosulfate (PMS)] was demonstrated to efficiently remove gaseous volatile organic compounds (VOCs). The removal efficiency of a representative VOC, styrene, was stable at above 98%, and an average mineralization rate was achieved at 76% during 2 h. The removal efficiency of the carbocatalysts/PMS wet scrubber for styrene was much higher than that of pure water, carbocatalysts/water, or PMS/water systems. Quenching experiments, electron spin resonance spectroscopy, in-situ Raman spectroscopy and density functional theory (DFT) calculations indicated that singlet oxygen (¹O₂) and oxidative complexes are the main reactive oxygen species and that both contributed to styrene removal. In particular, carbonyl groups (C═O) in the carbocatalyst were found to be the active sites for activating PMS during styrene oxidation. The role of ¹O₂ was discovered to be benzene ring breaking and a possible non-radical oxidation pathway of styrene was proposed based on time-of-flight mass spectroscopy which was further verified by DFT calculations. In particular, the electron transfer process of multi world carbon nanotubes-PMS* in styrene oxidation was further studied in-depth by experiments and DFT calculations. The unstable vinyl on styrene was simultaneously degraded by the oxidative complexes and ¹O₂ into benzene, and finally oxidized by ¹O₂ into H₂O and CO₂. This study provides an effective method for VOC removal and clearly illustrates the complete degradation mechanism of styrene in a nonradical PMS-based process by a wet scrubber.

Enhanced the synergistic degradation effect between active hydroxyl and reactive oxygen species for indoor formaldehyde based on platinum atoms modified MnOOH/MnO2 catalyst

Maintaining high activity during prolonged catalysis is always the pursuit in catalytic degradation of organic pollutants. For indoor formaldehyde (HCHO) degradation, the accumulation of intermediates is the major factor limiting the conversion of HCHO to final product CO₂ (HCHO-to-CO₂ conversion) and long-lasting catalysis. Herein, a three-dimensional radialized nanostructure catalyst self-assembled by MnOOH/MnO₂ nanosheets anchored with Pt single atoms (Pt_SA-MnOOH/MnO₂ with a trace platinum loading amount of 0.09%) is developed by thermally assisted two-step electrochemical method, which achieves enhanced CO₂ production in catalytic HCHO degradation at the room temperature by the collaborative action of active hydroxyl (OH*) and active oxygen species (O₂*). By boosting intermediates' decomposing, the catalyst implements real-time HCHO-to-CO₂ conversion (∼85.7%) and long-term continuous HCHO removal (∼98%) during 100 h in a 15 ppm HCHO atmosphere at 25 °C under a weight hourly space velocity of 30000 mL/g_cat∙h. Density functional theory calculation shows that the formation energy of O₂* from O₂ over Pt_SA-MnOOH/MnO₂ is nearly half lower than that over Pt-MnO₂ catalyst. And decomposing accumulated intermediates gives the credit to OH* species sustainably generated by the combined action of MnOOH and O₂*. The synergistic action between Pt_SA and MnOOH contributes to the continuous production of O₂* and OH* for enhancing CO₂ production in indoor catalytic formaldehyde degradation.

Rational design of M-N4-Gr/V2C heterostructures as highly active ORR catalysts: a density functional theory study

Inspired by the composites of N-doped graphene and transition metal-based materials as well as MXene-based materials, heterostructures (M-N₄-Gr/V₂C) of eight different transition metals (M = Ti, Cr, Mn, Fe, Co, Ni, Cu, and Zn) doped with nitrogen-coordinated graphene and V₂C as potential catalysts for the oxygen reduction reaction (ORR) using density functional theory (DFT) were designed and are described herein. The calculations showed that the heterostructure catalysts (except for Zn-N₄-Gr/V₂C) were thermodynamically stable. Ni-N₄-Gr/V₂C and Co-N₄-Gr/V₂C showed higher activities towards the ORR, with overpotentials as low as 0.32 and 0.45 V, respectively. Excellent catalytic performance results were observed from the change in electronic structure caused by the strong interaction between V₂C and the graphene layers as well as the synergistic effect between the MN₄ groups and the graphene layers. This study further provides insights into the practical application of ORR catalysts for MXene systems through the modulation of the electronic structure of two-dimensional materials.

Noble Metal Single-Atom Catalysts for the Catalytic Oxidation of Volatile Organic Compounds

Volatile organic compounds (VOCs) are detrimental to the environment and human health and must be eliminated before discharging. Oxidation by heterogeneous catalysts is one of the most promising approaches for the VOCs abatement. Precious metal catalysts are highly active for the catalytic oxidation of VOCs, but they are rare and their high price limits large-scale application. Supported metal single-atom catalysts (SACs) have a high atom efficiency and provide the possibility to circumvent such limitations. This Review summarizes recent advances in the use of metal SACs for the complete oxidation of VOCs, such as benzene, toluene, formaldehyde, and methanol, as well as aliphatic and Cl- and S-containing hydrocarbons. The structures of the metal SACs used and the reaction mechanisms of the VOC oxidation are discussed. The most widely used SACs are noble metals supported on oxides, especially on reducible oxides, such as Mn₂ O₃ and TiO₂ . The reactivity of most SACs is related to the activity of surface lattice oxygen of the oxides. Furthermore, several metal SACs show better reactivity and improved S and Cl resistance than the corresponding nanocatalysts, indicating that SACs have potential for application in the oxidation of VOCs. The deactivation and regeneration mechanisms of the metal SACs are also summarized. It is concluded that the application of metal SACs in catalytic oxidation of VOCs is still in its infancy. This Review aims to elucidate structure-performance relationships and to guide the design of highly efficient metal SACs for the catalytic oxidation of VOCs.

Density Functional Theory Study on the Influence of Cation and Anion Elements Doping on the Surface of Ti3C2 on the Adsorption Performance of Formaldehyde

Based on the generalized gradient approximation of density functional theory, the geometric structure and electronic properties of the intrinsic Ti3C2 and Cu-, Pt-, Co-, Si-, F-, Cl- or Br-doped Ti3C2 are optimized, and the adsorption process of HCHO on the surface of the intrinsic Ti3C2 and doped Ti3C2 is calculated. The effects of adsorption energy, stability, DOS and doping on bond length were discussed. The results show that the adsorption energy of the intrinsic Ti3C2 crystal plane at the top site is the strongest, at −7.58 eV. The optimal adsorption sites of HCHO on various doping systems are Cu-Top, Pt-Top, Co-Top, Si-Hollow, Cl-Hollow, F-Bridge and Br-Hollow, respectively. Among the doped elements, anion (F, Cl, Br) doping at each adsorption site generally reduces the formaldehyde adsorption activity of the substrate; cationic doping (Cu, Pt, Co, Si) enhances the adsorption activity of the substrate for formaldehyde at most of the adsorption sites, indicating that the modification effect of anions on Ti3C2 is not as good as that of cations. The adsorption capacity of Si-doped Ti3C2 for formaldehyde was significantly improved. Compared with the intrinsic Ti3C2 crystal plane at the same adsorption site, the adsorption activity of HCHO was improved, and the highest adsorption energy was −8.09 eV.

DFT Modeling of CO2 Adsorption and HCOO• Group Conversion in Anatase Au-TiO2-Based Photocatalysis

Due to the merits of carbon circulation and hydrocarbon production, solar-assisted photocatalysis has been regarded as an ideal option for securing a sustainable future of energy and environment. In the photocatalytic carbon cycle process, surface reactions including the adsorption of CO₂ and the conversion of CO₂ into CH₄, CH₃OH, etc. are crucial to be examined ascribed to their significant influence on the performance of the photocatalysis. Because the conversion reaction starts from the formation of HCOO^•, the density functional theory (DFT) model was established in this study to investigate the micromechanism of CO₂ adsorption and the conversion of CO₂ to HCOO^• group in the anatase Au-TiO₂ photocatalytic system. The CO₂ adsorption bonding in six configurations was simulated, on which basis the effects of the proportion of water molecules and the lattice temperature increase due to the local surface plasmon resonance (LSPR) on the photocatalytic CO₂ adsorption and conversion were specifically analyzed. The results show that the experimental conditions that water molecules are released before CO₂ are favorable for the formation of the adsorption configuration in which HCOO^• tends to be produced without the need of reaction activation energy. This is reasonable since the intermediate C atoms do not participate in bonding under these conditions. Moreover, Au clusters have an insignificant influence on the adsorption behaviors of CO₂ including the adsorption sites and configurations on TiO₂ surfaces. As a result, the reaction rate is reduced due to the temperature increase caused by the LSPR effect. Nevertheless, the reaction maintains a very high rate. Interestingly, configurations that require activation energy are also possible to be resulted, which exerts a positive influence of temperature on the conversion rate of CO₂. It is found that the rate of the reaction can be improved by approximately 1-10 times with a temperature rise of 50 K above the ambient.

A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions

Timely detection of formaldehyde is pivotal because formaldehyde is slowly released from the indoor decorative materials, jeopardizing our healthy. Herein, a high-response formaldehyde gas sensor based on Ag-ZnO/In₂O₃ nanofibers was successfully fabricated. Compared with all the control samples, the hybrid exhibits superior sensitivity (0.65 ppm^-1), excellent selectivity (≥ 12.5) and durable stability (the deviation value ≤ 3%). Particularly, an ultra-high response value of about 186 towards 100 ppm of formaldehyde at 260 °C was achieved, heading the list of outstanding candidates. Additionally, the limit of detection is as low as 9 ppb. The enhanced gas sensing properties can be mainly attributed to multi-level heterojunctions (n-n heterojunction and Ohmic junction) and the "spill-over" effect of Ag, ultimately increasing the adsorption of gas molecules on the surface of sensing material. This work verifies that proper design of multi-level heterojunctions significantly upgrade the sensing performance.

First-Principles Evaluation of Volatile Organic Compounds Degradation in Z-Scheme Photocatalytic Systems: MXene and Graphitic-CN Heterostructures

It is a formidable challenge to use the traditional trial-and-error method to identify suitable catalysts for the photocatalytic degradation of volatile organic compounds (VOCs). In this work, by performing density functional theory calculations, we designed three Z-scheme g-CN/M₂CO₂ (M = Hf, Zr, and Sc) heterostructures, which not only exhibit favorable structure stability but also show promising ability for photocatalytic degradation of VOCs. The enhancement of the photocatalytic activity of these three Z-scheme systems can be ascribed to the low recombination rate of electron-hole pairs because photoelectrons migrated from the g-CN layer to the M₂CO₂ layer as well as the internal electric fields in the Z-scheme heterojunction. Among the three heterostructures, only g-CN/Zr₂CO₂ presents favorable spectra utilization under photoirradiation as well as the direct band gap. As a result, in the Z-scheme g-CN/Zr₂CO₂ heterostructure, the electrons in the conduction band of g-CN migrate to the holes in the valence band of the Zr₂CO₂ layer, which improves extraction and utilization of photogenerated electrons in the g-CN sheet. Moreover, the Z-scheme g-CN/Zr₂CO₂ system shows superior performance for photocatalytic VOC degradation in comparison with individual g-CN and Zr₂CO₂, which can be attributed to the enhanced VOC adsorption capacity as well as excellent ability to photoactivate O₂ and H₂O into ^•O₂^- and ^•OH radicals. Our findings pave a new promising way to facilitate the application of MXene-based materials for VOC photocatalytic degradation.

Formaldehyde Molecules Adsorption on Zn Doped Monolayer MoS2: A First-Principles Calculation

Based on the first principles of density functional theory, the adsorption behavior of H2CO on original monolayer MoS2 and Zn doped monolayer MoS2 was studied. The results show that the adsorption of H2CO on the original monolayer MoS2 is very weak, and the electronic structure of the substrate changes little after adsorption. A new kind of surface single cluster catalyst was formed after Zn doped monolayer MoS2, where the ZnMo3 small clusters made the surface have high selectivity. The adsorption behavior of H2CO on Zn doped monolayer MoS2 can be divided into two situations. When the H-end of H2CO molecule in the adsorption structure is downward, the adsorption energy is only 0.11 and 0.15 eV and the electronic structure of adsorbed substrate changes smaller. When the O-end of H2CO molecule is downward, the interaction between H2CO and the doped MoS2 is strong leading to the chemical adsorption with the adsorption energy of 0.80 and 0.98 eV. For the O-end-down structure, the adsorption obviously introduces new impurity states into the band gap or results in the redistribution of the original impurity states. All of these may lead to the change of the chemical properties of the doped MoS2 monolayer, which can be used to detect the adsorbed H2CO molecules. The results show that the introduction of appropriate dopant may be a feasible method to improve the performance of MoS2 gas sensor.

Co-embedded sulfur vacant MoS2 monolayer as a promising catalyst for formaldehyde oxidation: a theoretical evaluation

In this work, we theoretically evaluated the complete catalytic oxidation of formaldehyde (HCHO) catalyzed by a cobalt embedded sulfur vacant MoS2 (COSv–MoS2) monolayer.

Hierarchical nanostructures self-assembled from δ-MnO2 ultrathin nanosheets and Mn3O4 octahedrons for efficient room-temperature HCHO oxidation

Self-assembling ultrathin active δ-MnO₂ nanosheets and Mn₃O₄ octahedrons into hierarchical texture enhances room-temperature formaldehyde oxidation at a low-level of Pt.