Determination of perfluorinated surfactants in surface water samples by two independent analytical techniques: liquid chromatography/tandem mass spectrometry and 19F NMR

A multi-platform approach for the comprehensive analysis of per- and polyfluoroalkyl substances (PFAS) and fluorine mass balance in commercial ski wax products

The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 μg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 μg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 μg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 μg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.

Fingerprinting Organofluorine Molecules via Position-Specific Isotope Analysis

Organofluorine substances are found in a wide range of materials and solvents commonly used in industry and homes, as well as pharmaceuticals and pesticides. In the environment, organofluorine molecules are now recognized as an important class of anthropogenic pollutants. Fingerprinting organofluorine compounds via their carbon isotope ratios (13C/12C) is crucial for correlating molecules with their source. Here we apply a 19F nuclear magnetic resonance spectroscopy (NMR) technique to obtain the first position-specific carbon isotope ratios for a diverse set of organofluorine molecules. In contrast to traditional isotope ratio mass spectrometry, the 19F NMR method provides 13C/12C isotope ratios at each carbon position where a C-F bond is present, and does not require fragmentation or combustion to CO2, overcoming challenges posed by the robust C-F covalent bonds. The method was validated with 2,2,2-trifluoroethanol, and applied to analyze heptafluorobutanoic acid, 5-fluorouracil and fipronil. Results reveal distinct intramolecular carbon isotope distributions, enabling differentiation of chemically identical molecules. Notably, the NMR method accurately analyzes carbon isotopes within target molecules despite impurities. Potential applications include the detection of counterfeit products and drugs, and ultimately pollution tracking in the environment.

PFAS in Nigeria: Identifying data gaps that hinder assessments of ecotoxicological and human health impacts

This review examines the extensive use and environmental consequences of Per- and Polyfluoroalkyl Substances (PFAS) on a global scale, specifically emphasizing their potential impact in Nigeria. Recognized for their resistance to water and oil, PFAS are under increased scrutiny for their persistent nature and possible ecotoxicological risks. Here, we consolidate existing knowledge on the ecological and human health effects of PFAS in Nigeria, focusing on their neurological effects and the risks they pose to immune system health. We seek to balance the advantages of PFAS with their potential ecological and health hazards, thereby enhancing understanding of PFAS management in Nigeria and advocating for more effective policy interventions and the creation of safer alternatives. The review concludes with several recommendations: strengthening regulatory frameworks, intensifying research into the ecological and health impacts of PFAS, developing new methodologies and longitudinal studies, fostering collaborative efforts for PFAS management, and promoting public awareness and education to support sustainable environmental practices and healthier communities in Nigeria.

The mechanism and kinetics of the atmospheric oxidation of CF3(CF2)2CHCH2 (HFC-1447fz) by hydroxyl radicals: ab initio investigation

The oxidation of 3,3,4,4,5,5,5-heptafluoro-1-pentene (HFC-1447fz) by hydroxyl radicals plays a crucial role in atmospheric conditions. By employing the CCSD(T)/cc-pVTZ//M06-2X/6-311++G(d,p) level of theory, the detailed reaction mechanism, kinetics and atmospheric implications of the degradation of HFC-1447fz by hydroxyl radicals were investigated. Compared to H-abstraction channels, the OH addition reaction is determined to be more favorable initial pathways in the degradation processes of HFC-1447fz. The overall rate coefficient of the degradation of HFC-1447fz by OH radicals is estimated to be 1.66 × 10-12 cm3 molecule-1 s-1 and the lifetime of HFC-1447fz is found to be 7 days at 298 K, which are in good agreement with the reported experimental results. The global warming potential (GWP) for HFC-1447fz on the 50, 100 and 500-year time horizons is estimated using the calculated rate coefficient. Furthermore, the mechanisms of the subsequent reactions of two OH-addition adducts have also been investigated. By TD-DFT calculations, it was found that eleven species can undergo photodissociation, while ten other species are photolytically stable under sunlight.

The use of a fluorine mass balance to demonstrate the mineralization of PFAS by high frequency and high power ultrasound

High-frequency ultrasound (sonolysis) has been shown as a practical approach for mineralizing PFAS in highly concentrated PFAS waste. However, a fluorine mass balance approach showing complete mineralization for ultrasound treatment has not been elucidated. The impact of ultrasonic power density (W/L) and the presence of co-occurring PFAS on the degradation of individual PFAS are not well understood. In this research, the performance of a 10L sonochemical reactor was assessed for treating synthetic high-concentration PFAS waste with carboxylic and sulfonic perfluoroalkyl surfactants ranging in chain length from four to eight carbons at three different initial concentrations: 6, 55, 183 μM. The mass balance for fluorine was performed using three analytical techniques: triple quadrupole liquid chromatography-mass spectrometry, a fluoride ion selective electrode, and 19F nuclear magnetic resonance. The test results showed near complete mineralization of PFAS in the waste without the formation of intermediate fluorinated by-products. The PFAS mineralization efficiency of the sonolysis treatment at two different power densities for similar initial concentrations were almost identical; the G value at 145 W/L was 9.7*10-3 g/kWh, whereas the G value at 90 W/L was 9.3*10-3 g/kWh. The results of this study highlight the implications for the scalability of the sonolytic process to treat high-concentration PFAS waste.

Fluorinated Pharmaceutical and Pesticide Photolysis: Investigating Reactivity and Identifying Fluorinated Products by Combining Computational Chemistry,19F NMR, and Mass Spectrometry

Fluorinated breakdown products from photolysis of pharmaceuticals and pesticides are of environmental concern due to their potential persistence and toxicity. While mass spectrometry workflows have been shown to be useful in identifying products, they fall short for fluorinated products and may miss up to 90% of products. Studies have shown that 19F NMR measurements assist in identifying and quantifying reaction products, but this protocol can be further developed by incorporating computations. Density functional theory was used to compute 19F NMR shifts for parent and product structures in photolysis reactions. Computations predicted NMR spectra of compounds with an R2 of 0.98. Computed shifts for several isolated product structures from LC-HRMS matched the experimental shifts with <0.7 ppm error. Multiple products including products that share the same shift that were not previously reported were identified and quantified using computational shifts, including aliphatic products in the range of -80 to -88 ppm. Thus, photolysis of fluorinated pharmaceuticals and pesticides can result in compounds that are polyfluorinated alkyl substances (PFAS), including aliphatic-CF3 or vinyl-CF2 products derived from heteroaromatic-CF3 groups. C-F bond-breaking enthalpies and electron densities around the fluorine motifs agreed well with the experimentally observed defluorination of CF3 groups. Combining experimental-computational 19F NMR allows quantification of products identified via LC-HRMS without the need for authentic standards. These results have applications for studies of environmental fate and analysis of fluorinated pharmaceuticals and pesticides in development.

Multicomponent PFAS sorption and desorption in common commercial adsorbents: Kinetics, isotherm, adsorbent dose, pH, and index ion and ionic strength effects

The adsorption and desorption of 9 PFAS, including 3 perfluoroalkyl sulphonic and 6 perfluoroalkyl carboxylic acids, in artificial groundwater was investigated using 3 commercial adsorbents that comprised a powdered activated carbon (PAC), a surface-modified organoclay (NMC+n), and a carbonaceous organic amendment (ROAC). Sorption kinetics and isotherms of PFAS, as well as the effects of adsorbent dose, pH, index ion and ionic strength on PFAS adsorption and desorption were investigated. Sorption of multicomponent PFAS in the adsorbents was rapid, especially for NMC+n and ROAC, regardless of PFAS chain length. The sorption and (and especially) desorption of PFAS in the adsorbents was impacted by the pH, index ion, and ionic strength of simulated groundwater, especially for the short chain PFAS, with only minimal impacts on NMC+n and PAC compared to ROAC. Although the potential mineral and charged constituents of the adsorbents contributed to the adsorption of short chain PFAS through electrostatic interactions, these interactions were susceptible to variable groundwater chemistry. Hydrophobic interactions also played a major role in facilitating and increasing PFAS sorption, especially in adsorbents with aliphatic functional groups. The desorption of PFAS from the adsorbents was below 8 % when the aqueous phase was deionised water, with no measurable desorption for NMC+n. In contrast, the desorption of short chain PFAS in simulated groundwater increased substantially (30-100 %) in the adsorbents, especially in ROAC and NMC+n, but more so with ROAC. In general, the three adsorbents exhibited strong stability for the long chain PFAS, especially the perfluoroalkyl sulphonic acids, with minimal to no sorption reversibility under different pH and ionic composition of simulated groundwater. This study highlights the importance of understanding not only the sorption of PFAS in groundwater using adsorbents, but also the desorption of PFAS, which may be useful for decision making during the ex-situ and in-situ treatment of PFAS-contaminated groundwater.

Identification and Prioritization of Environmental Organic Pollutants: From an Analytical and Toxicological Perspective

Exposure to environmental organic pollutants has triggered significant ecological impacts and adverse health outcomes, which have been received substantial and increasing attention. The contribution of unidentified chemical components is considered as the most significant knowledge gap in understanding the combined effects of pollutant mixtures. To address this issue, remarkable analytical breakthroughs have recently been made. In this review, the basic principles on recognition of environmental organic pollutants are overviewed. Complementary analytical methodologies (i.e., quantitative structure-activity relationship prediction, mass spectrometric nontarget screening, and effect-directed analysis) and experimental platforms are briefly described. The stages of technique development and/or essential parts of the analytical workflow for each of the methodologies are then reviewed. Finally, plausible technique paths and applications of the future nontarget screening methods, interdisciplinary techniques for achieving toxicant identification, and burgeoning strategies on risk assessment of chemical cocktails are discussed.

Investigation of the adsorption/desorption mechanism of perfluoroalkyl substances on HLB-WAX extraction phases for microextraction

The C-F alkyl structural backbone of per- and polyfluoroalkyl substances makes this class of molecules resistant to heat and degradation, leading to their high persistence and mobility in the environment and bioaccumulation in the tissues of living organisms. In this study, 15 PFAS with an alkyl chain length from C₄ to C₁₄, currently monitored by the U.S. Environmental Protection Agency (EPA), were preconcentrated by solid-phase microextraction (SPME) and analyzed by liquid chromatography-tandem mass spectrometry. The adsorption and desorption mechanisms of PFAS onto ion-exchange extraction phases was evaluated to understand the extraction process of PFAS from various environmental matrices under different conditions. This was achieved using two SPME geometries, namely fibers and thin films. The use of thin films resulted in a twofold improvement in extraction efficiency compared to fibers, especially for the short-chain PFAS. Methanol:water (80:20, v/v) was chosen as the optimized desorption solution, with ammonium formate added to minimize carryover. Extraction time profiles for both SPME geometries showed faster equilibration with thin films (30 min) compared to fibers (90-120 min). The linear dynamic range obtained with this method using fibers and thin films ranged from 10 to 5000 ng L^-1 and 2.5-5000 ng L^-1, respectively, with acceptable accuracy (70-130%) and precision (<15%). LOD ranged within 2.5-10 ng L^-1 for fibers and 0.01-0.25 ng L^-1 for thin films. Investigating the factors affecting PFAS recovery in complex samples enabled the quantitative assessment of PFAS contamination in various environmental water samples such as seawater, melted snow and biospecimens like human plasma. A 96-SPME holder was used for validation, which is compatible with sampling in 96-well plates and ensures high throughput in the analysis of real samples. The total concentration of PFAS detected in seawater and snow was 51.3 ng L^-1 and 16.4 ng L^-1, respectively.

Quantitation of Total PFAS Including Trifluoroacetic Acid with Fluorine Nuclear Magnetic Resonance Spectroscopy

Fluorine nuclear magnetic resonance (19F-NMR) spectroscopy has been shown to be a powerful tool capable of quantifying the total per- and polyfluoroalkyl substances (PFAS) in a complex sample. The technique relies on the characteristic terminal -CF3 shift (-82.4 ppm) in the alkyl chain for quantification and does not introduce bias due to sample preparation or matrix effects. Traditional quantitative analytical techniques for PFAS, such as liquid chromatography-mass spectrometry (LC-MS) and combustion ion chromatography (CIC), contain inherent limitations that make total fluorine analysis challenging. Here, we report a sensitive 19F-NMR method for the analysis of total PFAS, with a limit of detection of 99.97 nM, or 50 μg/L perfluorosulfonic acid. To demonstrate the capabilities of 19F-NMR, the technique was compared to two commonly used methods for PFAS analysis: total oxidizable precursor (TOP) assay and LC-high resolution MS analysis for targeted quantification and suspect screening. In both cases, the 19F-NMR analyses detected higher total PFAS quantities than either the TOP assay (63%) or LC-MS analyses (65%), suggesting that LC-MS and TOP assays can lead to underreporting of PFAS. Importantly, the 19F-NMR detected trifluoroacetic acid at a concentration more than five times the total PFAS concentration quantified using LC-MS in the wastewater sample. Therefore, the use of 19F-NMR to quantify the total PFAS in highly complex samples can be used to complement classic TOP or LC-MS approaches for more accurate reporting of PFAS contamination in the environment.

Wavelength-Dependent UV-LED Photolysis of Fluorinated Pesticides and Pharmaceuticals

The wavelength dependence of photoproduct formation and quantum yields was evaluated for fluorinated pesticides and pharmaceuticals using UV-light emitting diodes (LEDs) with 255, 275, 308, 365, and 405 nm peak wavelengths. The fluorinated compounds chosen were saflufenacil, penoxsulam, sulfoxaflor, fluoxetine, 4-nitro-3-trifluoromethylphenol (TFM), florasulam, voriconazole, and favipiravir, covering key fluorine motifs (benzylic-CF₃, heteroaromatic-CF₃, aryl-F, and heteroaromatic-F). Quantum yields for the compounds were consistently higher for UV-C as compared to UV-A wavelengths and did not show the same trend as molar absorptivity. For all compounds except favipiravir and TFM, the fastest degradation was observed using 255 or 275 nm light, despite the low power of the LEDs. Using quantitative ¹⁹F NMR, fluoride, trifluoroacetate, and additional fluorinated byproducts were tracked and quantified. Trifluoroacetate was observed for both Ar-CF₃ and Het-CF₃ motifs and increased at longer wavelengths for Het-CF₃. Fluoride formation from Het-CF₃ was significantly lower as compared to other motifs. Ar-F and Het-F motifs readily formed fluoride at all wavelengths. For Het-CF₃ and some Ar-CF₃ motifs, 365 nm light produced either a greater number of or different major products. Aliphatic-CF₂/CF₃ products were stable under all wavelengths. These results assist in selecting the most efficient wavelengths for UV-LED degradation and informing future design of fluorinated compounds.

Paints: A Source of Volatile PFAS in Air─Potential Implications for Inhalation Exposure

Paints are widely used in indoor settings yet there are no data for volatile per- and polyfluoroalkyl substances (PFAS) for paints or knowledge if paints are potentially important sources of human exposure to PFAS. Different commercial paints (n = 27) were collected from local hardware stores and analyzed for volatile PFAS by gas chromatography-mass spectrometry (GC-MS), nonvolatile PFAS by liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-qTOF), and total fluorine by ¹⁹F nuclear magnetic resonance spectroscopy (NMR). Diluted paint required clean up to remove 6:2 fluorotelomer phosphate diester (diPAP), which thermally transforms into 6:2 FTOH at 280 °C (GC inlet temperature). Only 6:2 FTOH (0.9-83 μg/g) and 6:2 diPAP (0.073-58 μg/g) were found in five exterior and nine interior paints and only accounted for a maximum of 17% of total fluorine. Upon drying, 40% of the FTOH mass was lost, and the loss was verified by measurements of the cumulative FTOH mass measured in the air of a small, confined space over a 3 h period. Based on the liquid paint results, the ConsExpo model was used for potential exposure assessment and one commercial paint exceeded the chosen reference dose (5 μg/kg-day) for children and adults, indicating the potential for human exposure during painting.

Toxicity assessment of historical aqueous film-forming foams (AFFFs) using cell-based assays

Aqueous film-forming foam (AFFF) has historically contained high concentrations of long-chain per-and polyfluoroalkyl substances (PFAS), which have been linked with adverse health outcomes. However, the toxicity of historical AFFFs remains largely unknown, presenting uncertainties in their risk assessment. This study assessed the toxicity of historical AFFFs by exposing human liver cells (HepG2) to various dilutions of 3M Light Water AFFF or Ansulite AFFF (0.001%, 0.002%, 0.005%, 0.009%, 0.019%, 0.038%, 0.075%, 0.15%, and 0.3%) for 24 h. The effects of the two AFFF formulations on the cell viability, intracellular reactive oxygen species (ROS) production, Nrf2-ARE activity, and DNA damage were assessed by CellTiter 96® Aq_ueous One Solution Cell Proliferation Assay (MTS kit), dichlorofluorescein diacetate assay, luciferase assay, and alkaline Comet assay, respectively. The results revealed that the two brands of AFFFs tested were toxic to HepG2 cells at dilutions lower than the recommended 3% application formulation. Specifically, exposure to 3M Light Water AFFF or Ansulite AFFF induced a dilution-dependent decrease in cell viability, increased intracellular ROS production, and increased Nrf2-ARE activity. However, except for the highest concentration (lowest dilution) of 3M Light Water AFFF tested (0.038%.), both 3M Light Water AFFF and Ansulite AFFF did not significantly induce cellular DNA damage. Overall, 3M Light Water AFFF was more toxic than Ansulite AFFF. The findings from this study provided valuable in vitro toxicity data that may better inform the health risk assessment of these historical AFFFs.

Development of a standardized adsorbable organofluorine screening method for wastewaters with detection by combustion ion chromatography

Per- and polyfluoroalkyl substances (PFAS) are man-made organofluorine chemicals that can contaminate environmental waters and have gained worldwide attention over the past two decades. PFAS are most frequently detected by mass spectrometric targeted analysis methods which may not detect all the PFAS in samples. This report describes the investigation of adsorbable organofluorine (AOF) with detection by combustion ion chromatography (CIC) for detection of PFAS in surface waters and wastewaters that adsorb to granular activated carbon (GAC) with the recognition that this technique measures more than just PFAS. Overall mean recoveries of 77-120% were obtained in 17 of the 18 tested surface water and wastewater matrices spiked with perfluoropentane sulfonate (PFPeS) and 55-119% mean recoveries were obtained in 11 of the 12 surface water and wastewater matrices spiked with a PFAS mixture. Poor method performance (34-39% mean recoveries) was observed in landfill leachate wastewater. Method detection limits of 1.4-2.2 μg L^-1 were achieved using 100 mL sample volumes adsorbed onto commercially available GAC. This report demonstrates that this AOF technique can be a useful screening tool for estimating organofluorine concentrations when PFAS contamination is suspected.

Analysis of Specific Perfluorohexane Sulfonate Isomers by Liquid Chromatography-Tandem Mass Spectrometry: Method Development and Application in Source Apportionment

Characterization of perfluorohexane sulfonate (PFHxS) isomers, a chemical proposed for listing under the Stockholm Convention, is important to elucidate its environmental behaviors and sources. Optimized chromatographic separation coupled with monitoring of the characteristic fragments enabled the identification of four mono-substituted and two di-substituted branched PFHxS isomers. The transitions of molecular ions m/z 399 to the fragments m/z 80 (n-), m/z 169 (iso-), m/z 319 (1m-), m/z 80 (2m-), and m/z 180 (3m-) were selected for quantifying the mono-substituted isomers. Method accuracy of the established LC-MS/MS was verified by comparing the results of technical products with those determined by ¹⁹F-nuclear magnetic resonance (NMR). The developed method was then used to quantify the isomeric compositions of PFHxS in the perfluorooctane sulfonate (PFOS) industrial products which contained PFHxS as an impurity, as well as in several kinds of water samples, with the limits of detection for all isomers in the range of 4 to 30 pg/L. For the first time, a liquid chromatography-tandem mass spectrometry method was established to separate and quantify the PFHxS isomers. The isomeric profiling of water samples suggested that PFHxS in the waters was mainly due to the direct contamination of PFHxS rather than from PFOS contamination.

Finding Fluorine: Photoproduct Formation during the Photolysis of Fluorinated Pesticides

The photolysis of pesticides with different fluorine motifs was evaluated to quantify the formation of fluorinated products in buffered aqueous systems, advanced oxidation (AOP) and reduction processes (ARP), and river water. Simulated sunlight quantum yields at pH 7 were 0.0033, 0.0025, 0.0015, and 0.00012 for penoxsulam, florasulam, sulfoxaflor, and fluroxypyr, respectively. The bimolecular rate constants with hydroxyl radicals were 2 to 5.7 × 1010 M-1 s-1 and, with sulfate radicals, 1.6 to 2.6 × 108 M-1 s-1 for penoxsulam, florasulam, and fluroxypyr, respectively. The rate constants of sulfoxaflor were 100-fold lower. Using quantitative 19F-NMR, complete fluorine mass balances were obtained. The maximum fluoride formation was 53.4 and 87.4% for penoxsulam and florasulam under ARP conditions, and 6.1 and 100% for sulfoxaflor and fluroxypyr under AOP conditions. Heteroaromatic CF3 and aliphatic CF2 groups were retained in multiple fluorinated photoproducts. Aryl F and heteroaromatic F groups were readily defluorinated to fluoride. CF3 and CF2 groups formed trifluoroacetate and difluoroacetate, and yields increased under oxidizing conditions. 19F-NMR chemical shifts and coupling analysis provided information on hydrogen loss on adjacent bonds or changes in chirality. Mass spectrometry results were consistent with the observed 19F-NMR products. These results will assist in selecting treatment processes for specific fluorine motifs and in the design of agrochemicals to reduce byproduct formation.

Detection methods for sub-nanogram level of emerging pollutants - Per and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds has been manufactured for more than five decades and used in different purposes. Among persistent organic pollutants, PFAS are toxic, bioaccumulative in humans, wildlife, and global environment. As per environmental protection agency (EPA) guidelines, the perfluorooctanoate and perfluorooctane sulfonate permissible limit was 0.07 ng/L in drinking water. When the concentration exceeds the acceptable limit, it has negative consequences for humans. In such a case, PFAS monitoring is critical, and a quick detection technique are highly needed. Health departments and regulatory agencies have interests in monitoring of PFAS presences and exposures. For the detection of PFAS, numerous highly precise and sensitive chromatographic methods are available. However, the drawbacks of analytical techniques include timely sample preparations and the lack of on-site applicability. As a result, there is an increasing demand for simple sensor systems for monitoring of PFAS in real field samples. In this review, we first describe the sample pre-treatment and analytical techniques for the detection of PFAS. Second, we broadly discussed available sensor system for the quantification of PFAS in different filed samples. Finally, future trends in PFASs sensor are also presented.

Determination of total reducible organofluorine in PFAS-impacted aqueous samples based on hydrated electron defluorination

Per- and polyfluoroalkyl substances (PFASs) is a large group of thousands of anthropogenic chemicals. Recently, measurement of total organic fluorine (TOF) to reflect the total PFASs has been recommended in limits and advisories. In this study, a total reducible organofluorine (TROF) assay is developed based on hydrated electron (e_aq^-) conversion of PFASs into inorganic fluorine combined with ion chromatograph, which is a common and widespread instrument. The e_aq^- is generated in UV/sulfite system with alkaline condition, and the concentration of TROF (C_{F_TROF}) is the difference of fluoride concentration before and after assay. Method validation uses perfluorooctanesulfonic acid, perfluorooctanoic acid and their main alternatives, and F^- recoveries are 76.6%-101%, except for perfluorobutanesulfonic acid (48.5%). Method application of TROF assay uses industrial surfactant products and fluorochemical industry-contaminated water, meanwhile, target PFAS analysis and total oxidizable precursors (TOP) assay are concurrently conducted. Concentrations of PFASs detected in target analysis and TOP assay were converted to fluorine equivalents concentrations (C_{F_Target} and C_{F_TOP}). ∑C_{F_Target} and ∑C_{F_TOP} account for 0.80%-36% of C_{F_TROF} in industrial samples, 0.12%-54% in environmental water and 9.7%-14% in wastewater. The TROF assay can be used to initially judge whether PFASs contamination occurred near a hotspot with known sources. The C_{F_TROF} could infer the extent of PFAS contamination in PFAS-impacted samples and estimate the fraction of uncharacterized PFAS.

Observed and predicted embryotoxic and teratogenic effects of organic and inorganic environmental pollutants and their mixtures in zebrafish (Danio rerio)

Risk assessment of chemicals is still primarily focusing on single compound evaluation, even if environmental contamination consists of a mixture of pollutants. The concentration addition (CA) and independent action (IA) models have been developed to predict mixture toxicity. Both models assume no interaction between the components, resulting in an additive mixture effect. In the present study, the embryo toxicity test (OECD TG no. 236) with zebrafish embryos (Danio rerio) was performed to investigate whether the toxicity caused by binary, ternary, and quaternary mixtures of organic (Benzo[a]pyrene, perfluorooctanesulfonate, and 3,3´,4,4´,5-pentachlorobiphenyl 126) and inorganic (arsenate) pollutants can be predicted by CA and IA. The acute toxicity and sub-lethal alterations such as lack of blood circulation were investigated. The models estimated the mixture toxicity well and most of the mixtures were additive. However, the binary mixture of PFOS and PCB126 caused a synergistic effect, with almost a ten-fold difference between the observed and predicted LC₅₀-value. For most of the mixtures, the CA model was better in predicting the mixture toxicity than the IA model, which was not expected due to the chemicals' different modes of action. In addition, some of the mixtures caused sub-lethal effects not observed in the single compound toxicity tests. The mixture of PFOS and BaP caused a division of the yolk and imbalance was caused by the combination of PFOS and As and the ternary mixture of PFOS, As, and BaP. Interestingly, PFOS was part of all three mixtures causing the mixture specific sub-lethal effects. In conclusion, the present study shows that CA and IA are mostly resulting in good estimations of the risks that mixtures with few components are posing. However, for a more reliable assessment and a better understanding of mixture toxicity, further investigations are required to study the underlying mechanisms.

Total organic fluorine (TOF) analysis by completely converting TOF into fluoride with vacuum ultraviolet

Quantifying total organic fluorine (TOF) in water is vital in monitoring the occurrence and persistence of all fluorine-containing organic compounds in the environment, while currently most studies focus on analyzing individual fluorine-containing organic compounds. To fill the technology gap, we herein proposed to convert TOF completely into fluoride with vacuum ultraviolet (VUV) photolysis, followed by analysis of fluoride with ion chromatography. Results showed that the tailored VUV photoreactor achieved satisfying recoveries of fluorine from ten model TOF compounds not only in ultrapure water (83.9 ± 2.0% to 109.4 ± 0.8%) but also in real water samples (92.1 ± 1.0%-106.2 ± 15.7%). Unlike other ultraviolet-based processes that favor alkaline conditions, this VUV process preferred either neutral or acidic conditions to defluorinate selected compounds. While the mechanisms remain to be explored in the future, it has been evidenced that the photo-degradation and photo-defluorination rates of these TOF compounds varied significantly among compounds and operation conditions. The method obtained a method detection limit (MDL) of 0.15 μg-F/L, which is lower than the MDLs of many other TOF analytical methods, along with excellent calibration curves for concentrations ranging from 0.01 to 10.0 mg-F/L. Notably, minimizing fluoride in sample prior to photoconversion was necessary to avoid subtraction-induced errors for TOF measurement, especially when the fluoride/TOF ratio was high. The robust VUV is also green for sample pretreatment due to its unreliance of chemicals or additives.

Noise-Reduced Quantitative Fluorine NMR Spectroscopy Reveals the Presence of Additional Per- and Polyfluorinated Alkyl Substances in Environmental and Biological Samples When Compared with Routine Mass Spectrometry Methods

Per- and polyfluorinated alkyl substances (PFAS) are ubiquitous throughout the environment. Analysis of PFAS is commonly performed using both targeted and nontargeted mass spectrometry methods. However, it has been demonstrated that measurements of fluorinated compounds in the environment by mass spectrometry often fall short of the total fluorine concentration. In the present study, we employ a ¹⁹F NMR technique, which is capable of detailing fluorinated compounds in a sample while providing both quantitative and structural information. Inclusion of a noise-reduction strategy involving the acquisition of arrays of spectra with an increasing number of transients addresses the sensitivity challenges of environmental nuclear magnetic resonance (NMR), improving signal to noise. When this technique is applied to environmental and biological samples including rainwater, lake water, wastewater effluent, serum, and urine, the presence of PFAS, which may have been missed by routine mass spectrometric methods, is revealed. Important resonances in the ¹⁹F NMR spectrum such as that of trifluoroacetic acid are brought above the limit of quantification in all samples, allowing detection limits as low as 389 pg/L in rainwater. A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method, which was used to analyze 47 PFAS compounds, accounts for only 3.7-27% of the total fluorine concentration as determined by the NMR strategy in the present study.

NMR spectroscopy of wastewater: A review, case study, and future potential

NMR spectroscopy is arguably the most powerful tool for the study of molecular structures and interactions, and is increasingly being applied to environmental research, such as the study of wastewater. With over 97% of the planet's water being saltwater, and two thirds of freshwater being frozen in the ice caps and glaciers, there is a significant need to maintain and reuse the remaining 1%, which is a precious resource, critical to the sustainability of most life on Earth. Sanitation and reutilization of wastewater is an important method of water conservation, especially in arid regions, making the understanding of wastewater itself, and of its treatment processes, a highly relevant area of environmental research. Here, the benefits, challenges and subtleties of using NMR spectroscopy for the analysis of wastewater are considered. First, the techniques available to overcome the specific challenges arising from the nature of wastewater (which is a complex and dilute matrix), including an examination of sample preparation and NMR techniques (such as solvent suppression), in both the solid and solution states, are discussed. Then, the arsenal of available NMR techniques for both structure elucidation (e.g., heteronuclear, multidimensional NMR, homonuclear scalar coupling-based experiments) and the study of intermolecular interactions (e.g., diffusion, nuclear Overhauser and saturation transfer-based techniques) in wastewater are examined. Examples of wastewater NMR studies from the literature are reviewed and potential areas for future research are identified. Organized by nucleus, this review includes the common heteronuclei (¹³C, ¹⁵N, ¹⁹F, ³¹P, ²⁹Si) as well as other environmentally relevant nuclei and metals such as ²⁷Al, ⁵¹V, ²⁰⁷Pb and ¹¹³Cd, among others. Further, the potential of additional NMR methods such as comprehensive multiphase NMR, NMR microscopy and hyphenated techniques (for example, LC-SPE-NMR-MS) for advancing the current understanding of wastewater are discussed. In addition, a case study that combines natural abundance (i.e. non-concentrated), targeted and non-targeted NMR to characterize wastewater, along with in vivo based NMR to understand its toxicity, is included. The study demonstrates that, when applied comprehensively, NMR can provide unique insights into not just the structure, but also potential impacts, of wastewater and wastewater treatment processes. Finally, low-field NMR, which holds considerable future potential for on-site wastewater monitoring, is briefly discussed. In summary, NMR spectroscopy is one of the most versatile tools in modern science, with abilities to study all phases (gases, liquids, gels and solids), chemical structures, interactions, interfaces, toxicity and much more. The authors hope this review will inspire more scientists to embrace NMR, given its huge potential for both wastewater analysis in particular and environmental research in general.

Analysis of surfactants by mass spectrometry: Coming to grips with their diversity

Surfactants are surface-active agents widely used in numerous applications in our daily lives as personal care products, domestic, and industrial detergents. To determine complex mixtures of surfactants and their degradation products, unselective and rather insensitive methods, based on colorimetric and complexometric analyses are no longer employable. Analytical methodologies able to determine low concentration levels of surfactants and closely related compounds in complex matrices are required. The recent introduction of robust, sensitive, and selective mass spectrometry (MS) techniques has led to the rapid expansion of the surfactant research field including complex mixtures of isomers, oligomers, and homologues of surfactants as well as their chemically and biodegradation products at trace levels. In this review, emphasis is given to the state-of-the-art MS-based analysis of surfactants and their degradation products with an overview of the current research landscape from traditional methods involving hyphenate techniques (gas chromatography-MS and liquid chromatography-MS) to the most innovative approaches, based on high-resolution MS. Finally, we outline a detailed explanation on the utilization of MS for mechanistic purposes, such as the study of micelle formation in different solvents.

Combustion ion chromatography for extractable organofluorine analysis

Combustion ion chromatography (CIC) has found a role in environmental analytical chemistry for fluorine content analysis. It is used for extractable organofluorine (EOF) analysis to evaluate perfluoroalkyl and polyfluoroalkyl substances (PFASs) and other organofluorine burden. The prevailing assumption has been that all PFASs are incinerated in CIC and matrix components have no impact on this process, but this has not been experimentally evaluated. In this work, the combustion efficiencies of 13 different PFASs were determined (66–110%). A notable difference was observed between calibrating the CIC with inorganic fluorine or organofluorine. Potential interferences from cations and coextracted matrix components from whole blood and surface water samples were evaluated. These observations should be acknowledged when performing EOF analysis using CIC, overlooking either non-100% combustion efficiencies or the differences in calibrating the CIC with inorganic fluorine or organofluorine could lead to underestimating EOF content and through that to misguide policy decisions.

•

Combustion efficiencies of PFASs were in the range of 66–110%

•

There was difference between calibration with inorganic fluorine and organofluorine

•

Matrix had no discernable effect on combustion efficiency

Sensors for detecting per- and polyfluoroalkyl substances (PFAS): A critical review of development challenges, current sensors, and commercialization obstacles

Per- and polyfluoroalkyl substances (PFAS) are a class of compounds that have become environmental contaminants of emerging concern. They are highly persistent, toxic, bioaccumulative, and ubiquitous which makes them important to detect to ensure environmental and human health. Multiple instrument-based methods exist for sensitive and selective detection of PFAS in a variety of matrices, but these methods suffer from expensive costs and the need for a laboratory and highly trained personnel. There is a big need for fast, inexpensive, robust, and portable methods to detect PFAS in the field. This would allow environmental laboratories and other agencies to perform more frequent testing to comply with regulations. In addition, the general public would benefit from a fast method to evaluate the drinking water in their homes for PFAS contamination. A PFAS sensor would provide almost real-time data on PFAS concentrations that can also provide actionable information for water quality managers and consumers around the planet. In this review, we discuss the sensors that have been developed up to this point for PFAS detection by their molecular detection mechanism as well as the goals that should be considered during sensor development. Future research needs and commercialization challenges are also highlighted.

Ion exchange solid phase microextraction coupled to liquid chromatography/laminar flow tandem mass spectrometry for the determination of perfluoroalkyl substances in water samples

Per- and polyfluoroalkyl substances (PFAS) are toxic and bioaccumulative compounds that are persistent in the environment due to their water and heat resistant properties. These compounds have been demonstrated to be ubiquitous in the environment, being found in water, soil, air and various biological matrices. The determination of PFAS at ultra-trace levels is thus critical to assess the extent of contamination in a particular matrix. In this work, solid phase microextraction (SPME) was evaluated as a pre-concentration technique to aid the quantitation of this class of pollutants below the EPA established advisory limits in drinking water at parts-per-trillion levels. Four model PFAS with varying physicochemical properties, namely hexafluoropropylene oxide dimer acid (GenX), perfluoro-1- butanesulfonate (PFBS), perfluoro-n-octanoic acid (PFOA) and perfluoro-1-octanesulfonate (PFOS) were studied as a proof of concept. Analysis was performed with the use of ultra-high pressure liquid chromatography-laminar flow tandem mass spectrometry (UHPLC-MS/MS). This study proposes the use of hydrophilic-lipophilic balance-weak anion-exchange/polyacrylonitrile (HLB-WAX/PAN) as a SPME coating, ideal for all model analytes. A sample volume of 1.5 mL was used for analysis, the optimized protocol including 20 min extraction, 20 min desorption and 6 min LC/MS analysis. This method achieved LOQs of 2.5 ng L^- 1 (PFOS) and 1 ng L ^- 1 (GenX, PFBS and PFOA) with satisfactory precision and accuracy values evaluated over a period of 5 days.

Isolating the AFFF Signature in Coastal Watersheds Using Oxidizable PFAS Precursors and Unexplained Organofluorine

Water supplies for millions of U.S. individuals exceed maximum contaminant levels for per- and polyfluoroalkyl substances (PFAS). Contemporary and legacy use of aqueous film forming foams (AFFF) is a major contamination source. However, diverse PFAS sources are present within watersheds, making it difficult to isolate their predominant origins. Here we examine PFAS source signatures among six adjacent coastal watersheds on Cape Cod, MA, U.S.A. using multivariate clustering techniques. A distinct signature of AFFF contamination enriched in precursors with six perfluorinated carbons (C6) was identified in watersheds with an AFFF source, while others were enriched in C4 precursors. Principal component analysis of PFAS composition in impacted watersheds showed a decline in precursor composition relative to AFFF stocks and a corresponding increase in terminal perfluoroalkyl sulfonates with < C6 but not those with ≥ C6. Prior work shows that in AFFF stocks, all extractable organofluorine (EOF) can be explained by targeted PFAS and precursors inferred using Bayesian inference on the total oxidizable precursor assay. Using the same techniques for the first time in impacted watersheds, we find that only 24%-63% of the EOF can be explained by targeted PFAS and oxidizable precursors. Our work thus indicates the presence of large non-AFFF organofluorine sources in these coastal watersheds.

Assessing the Ecological Risks of Per- and Polyfluoroalkyl Substances: Current State-of-the Science and a Proposed Path Forward

Per- and poly-fluoroalkyl substances (PFAS) encompass a large, heterogenous group of chemicals of potential concern to human health and the environment. Based on information for a few relatively well-understood PFAS such as perfluorooctane sulfonate and perfluorooctanoate, there is ample basis to suspect that at least a subset can be considered persistent, bioaccumulative, and/or toxic. However, data suitable for determining risks in either prospective or retrospective assessments are lacking for the majority of PFAS. In August 2019, the Society of Environmental Toxicology and Chemistry sponsored a workshop that focused on the state-of-the-science supporting risk assessment of PFAS. The present review summarizes discussions concerning the ecotoxicology and ecological risks of PFAS. First, we summarize currently available information relevant to problem formulation/prioritization, exposure, and hazard/effects of PFAS in the context of regulatory and ecological risk assessment activities from around the world. We then describe critical gaps and uncertainties relative to ecological risk assessments for PFAS and propose approaches to address these needs. Recommendations include the development of more comprehensive monitoring programs to support exposure assessment, an emphasis on research to support the formulation of predictive models for bioaccumulation, and the development of in silico, in vitro, and in vivo methods to efficiently assess biological effects for potentially sensitive species/endpoints. Addressing needs associated with assessing the ecological risk of PFAS will require cross-disciplinary approaches that employ both conventional and new methods in an integrated, resource-effective manner. Environ Toxicol Chem 2021;40:564-605. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. This article has been contributed to by US Government employees and their work is in the public domain in the USA.

Dominant entropic binding of perfluoroalkyl substances (PFASs) to albumin protein revealed by 19F NMR

Mechanistic insight into protein binding by poly- and perfluoroalkyl substances (PFASs) is critical to understanding how PFASs distribute and accumulate within the body and to developing predictive models within and across classes of PFASs. Fluorine nuclear magnetic resonance spectroscopy (19F NMR) has proven to be a powerful, yet underutilized tool to study PFAS binding; chemical shifts of each fluorine group reflect the local environment along the length of the PFAS molecule. Using bovine serum albumin (BSA), we report dissociation constants, Kd, for four common PFASs well below reported critical micelle concentrations (CMCs) - perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexanesulfonic acid (PFHxS), and perfluorooctanesulfonic acid (PFOS) - as a function of temperature in phosphate buffered saline. Kd values were determined based on the difluoroethyl group adjacent to the anionic headgroups and the terminal trifluoromethyl groups. Our results indicate that the hydrophobic tails exhibit greater binding affinity relative to the headgroup, and that the binding affinities are generally consistent with previous results showing that greater PFAS hydrophobicity leads to greater protein binding. However, the binding mechanism was dominated by entropic hydrophobic interactions attributed to desolvation of the PFAS tails within the hydrophobic cavities of the protein and on the surface of the protein. In addition, PFNA appears to form hemimicelles on the protein surfaces below reported CMC values. This work provides a renewed approach to utilizing 19F NMR for PFAS-protein binding studies and a new perspective on the role of solvent entropy.

Benchtop 19 F NMR spectroscopy as a practical tool for testing of remedial technologies for the degradation of perfluorooctanoic acid, a persistent organic pollutant

The development of effective remedial technologies for the destruction of environmental pollutants requires the ability to clearly monitor degradation processes. Nuclear magnetic resonance (NMR) spectroscopy is a powerful tool for understanding reaction progress; however, practical considerations often restrict the application of NMR spectroscopy as a tool to better understand the degradation of environmental pollutants. Chief among these restrictions is the limited access smaller environmental research labs and remediation companies have to suitable NMR facilities. Benchtop NMR spectroscopy is a low-cost and user-friendly approach to acquire much of the same information as conventional nuclear magnetic resonance (NMR) spectroscopy, albeit with reduced sensitivity and resolution. This paper explores the practical application of benchtop NMR spectroscopy to understand the degradation of perfluorooctanoic acid using sodium persulfate, a common reagent for the destruction of groundwater contaminants. It is found that Benchtop ¹⁹ F NMR spectroscopy is able to monitor the complete degradation of perfluorooctanoic acid into fluoride; however, the observation of intermediate degradation products formed, which can be observed using a conventional NMR spectrometer, cannot be readily distinguished from the parent compound when measurements are performed using the benchtop instrument. Under certain reaction conditions, the formation of fluorinated structures that are resistant to further degradation is readily observed. Overall, it is shown that benchtop ¹⁹ F NMR spectroscopy has potential as a quick and reliable tool to assist in the development of remedial technologies for the degradation of fluorinated contaminants.

A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater

Water-borne emerging pollutants are among the greatest concern of our modern society. Many of these pollutants are categorized as endocrine disruptors due to their environmental toxicities. They are harmful to humans, aquatic animals, and plants, to the larger extent, destroying the ecosystem. Thus, effective environmental remediations of these pollutants became necessary. Among the various remediation techniques, adsorption and photocatalytic degradation have been single out as the most promising. This review is devoted to the compilations and analysis of the role of metal-organic frameworks (MOFs) and their composites as potential materials for such applications. Emerging organic pollutants, like dyes, herbicides, pesticides, pharmaceutical products, phenols, polycyclic aromatic hydrocarbons, and perfluorinated alkyl substances, have been extensively studied. Important parameters that affect these processes, such as surface area, bandgap, percentage removal, equilibrium time, adsorption capacity, and recyclability, are documented. Finally, we paint the current scenario and challenges that need to be addressed for MOFs and their composites to be exploited for commercial applications.

Destruction of Per- and Polyfluoroalkyl Substances (PFASs) in Aqueous Film-Forming Foam (AFFF) with UV-Sulfite Photoreductive Treatment

Ultraviolet photochemical reaction of sulfite (SO₃^2-) photosensitizer generates strongly reducing hydrated electrons (e_aq^-; NHE = -2.9 V) that have been shown to effectively degrade individual per- and polyfluoroalkyl substances (PFASs), including perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). However, treatment of complex PFAS mixtures in aqueous film-forming foam (AFFF) remains largely unknown. Here, UV-sulfite was applied to a diluted AFFF to characterize e_aq^- reactions with 15 PFASs identified by liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) targeted analysis. Results show that reactivity varies widely among PFASs, but reaction rates observed for individual PFASs in AFFF are similar to rates observed in single-solute experiments. While some structures, including long-chain perfluoroalkyl sulfonic acids (PFSAs) and perfluoroalkyl carboxylic acids (PFCAs) were readily degraded, other structures, most notably short-chain PFSAs and fluorotelomer sulfonic acids (FTSs), were more recalcitrant. This finding is consistent with results showing incomplete fluoride ion release (up to 53% of the F content in AFFF) during reactions. Furthermore, results show that selected PFSAs, PFCAs, and FTSs can form as transient intermediates or unreactive end-products via e_aq^- reactions with precursor structures in AFFF. These results indicate that while UV-sulfite treatment can be effective for treating PFOS and PFOA to meet health advisory levels, remediation of the wider range of PFASs in AFFF will prove more challenging.

Per- and polyfluoroalkyl substances in water and soil in wastewater-irrigated farmland in Jordan

The Zarqa river (ZR) in Jordan receives >300,000 m³ day ^-1 of wastewater effluent from Assamra wastewater treatment plant (WWTP) and is a major source of irrigation water for vegetable crops and fodder downstream. ZR water quality is therefore highly important and directly influences crop and soil quality in irrigated fields. This study investigated the occurrence and concentration of 20 per- and polyfluoroalkyl substances (PFASs) in Assamra wastewater, ZR water, soils and crop plants (alfalfa (Medicago sativa), mint (Mentha spicata) and lettuce (Lactuca sativa)) along the ZR flow path between Assamra WWTP and Jerash spring. The combined PFAS concentration (∑PFASs) in Assamra WWTP effluent (14-24 ng L^-1) was comparable to that in influent (10-15 ng L^-1), indicating poor removal of PFASs. The dominant PFAS in influent was perfluorodecanoate (PFDA), while perfluorooctanoate (PFOA) and perfluoropentanoate (PFPeA) dominated in effluent. ∑PFASs in an unaffected upstream tributary (Sukhna station) was 4.7-5.4 ng L^-1. Farther downstream, ZR water contained 16-27 ng L^-1, with PFPeA, PFOA and PFDA dominating, and these levels did not change along the flow path to Jerash spring. ∑PFASs in soil was generally low, 340 ± 150 pg g^-1 dry weight (dw) in alfalfa soil (mainly PFOA and PFDA) and 710 ± 420 pg g^-1 dw in mint soil and 970 ± 800 pg g^-1 dw in lettuce soil (mainly linear perfluorooctane sulfonate (L-PFOS) in both cases). Soil-water partitioning coefficient (K_d) was generally low in all soils (range 24-62 L kg^-1, 20-46 L kg^-1 and 28 L kg^-1 for PFOA, PFDA and L-PFHxS, respectively). No PFASs were detected in alfalfa and mint plants. Overall, this investigation demonstrated that PFAS contamination in wastewater, surface water and soil in the ZR basin is very low in a global comparison, and that there is no accumulation of PFASs in the food and feed crops studied.

Point source characterization of per- and polyfluoroalkyl substances (PFASs) and extractable organofluorine (EOF) in freshwater and aquatic invertebrates

Major point sources of per- and polyfluoroalkyl substances (PFASs) cause ubiquitous spread of PFASs in the environment. In this study, surface water and aquatic invertebrates at three Swedish sites impacted by PFAS point sources were characterized, using homologue, isomer and extractable organofluorine (EOF) profiling as well as estimation of bioaccumulation factors (BAFs) and mass discharge. Two sites were impacted by fire training (sites A and R) and the third by industrial runoff (site K). Mean Σ₂₅PFASs concentration in water was 1920 ng L^-1 at site R (n = 3), which was more than 20- and 10-fold higher than those from sites A and K, respectively. PFOS was the most predominant PFAS in all waters samples, constituting 29-79% of Σ₂₅PFAS concentrations. Several branched isomers were detected and they substantially contributed to concentrations in surface water (e.g. 49-78% of ΣPFOS) and aquatic invertebrates (e.g. 15-28% of ΣPFOS). BAFs in the aquatic invertebrates indicated higher bioaccumulation for long chain PFASs and lower bioaccumulation for branched PFOS isomers compared to linear PFOS. EOF mass balance showed that Σ₂₅target PFASs in water could explain up to 55% of EOF at site R. However, larger proportions of EOF (>92%) remained unknown in water from sites A and K. Mass discharges were for the first time estimated for EOF and revealed that high amounts of EOF (e.g. 8.2 g F day^-1 at site A) could be transported by water to recipient water bodies relative to Σ₂₅PFASs (e.g. 0.15 g day^-1 at site A). Overall, we showed that composition profiling, BAFs and EOF mass balance can improve the characterization of PFASs around point sources.

A Review of Perfluoroalkyl Acids (PFAAs) in terms of Sources, Applications, Human Exposure, Dietary Intake, Toxicity, Legal Regulation, and Methods of Determination

Per- and polyfluoroalkyl substances (PFASs) are widely distributed across the world and are expected to be of concern to human health and the environment. The review focuses on perfluoroalkyl acids (PFAAs) and, in particular, on the most frequently discussed perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkane sulfonic acids (PFSAs). In this study, some basic information concerning PFASs is reviewed, focusing mainly on PFAAs (perfluoroalkyl acids). We have made efforts to systemize their division into groups according to chemical structure, describe their basic physicochemical properties, characterize production technologies, and determine potential human exposure routes with particular reference to oral exposure. A variety of possible toxicological effects to human health are also discussed. In response to increasing public concern about the toxicity of PFAAs, an evaluation of dietary intake has been undertaken for two of the most commonly known PFAAs: perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). As summarized in this study, PFAAs levels need further assessment due to the science-based TWI standards laid down by the EFSA’s CONTAM Panel regarding the risk to human health posed by the presence of perfluorooctane sulfonic acid and perfluorooctanoic acid in food (tolerable weekly intakes of PFOA and PFOS set up to 6 ng·kg−1·bw·week−1 and 13 ng·kg−1·bw·week−1, respectively). Current legislation, relevant legislation on PFAAs levels in food, and the most popular methods of analysis in food matrices are described.

Nontargeted Analysis of a Non-Aqueous-Phase Liquid From a Chemical Manufacturing Site Using Nuclear Magnetic Resonance Spectroscopy

Non-aqueous-phase liquids (NAPLs), composed primarily of organic solvents and other immiscible liquids, can be found in the subsurface at many industrial sites. The chemical composition of NAPLs is often complex and, in many instances, difficult to fully characterize using conventional analytical techniques based on targeted compound analysis. Incomplete characterization of NAPLs leaves gaps in the understanding of the chemical profile at an impacted site. Previous work has shown that nuclear magnetic resonance (NMR) spectroscopy may be able to assist in the improved characterization of complex NAPL samples. In general, NMR spectroscopy provides an unbiased approach for the analysis of organic compounds because different classes of compounds are all treated and analyzed using the same methods. In addition, NMR spectroscopy provides unique structural information that can be used to elucidate unknowns. The present study describes the use of NMR spectroscopy as a nontargeted tool to characterize the composition of NAPLs collected from an impacted site. It is shown that NMR spectroscopy can be a complementary tool to be used in site assessments to help provide improved understanding of NAPL chemistry, leading to the development of improved conceptual site models and improved strategies for remedial and managerial activities at impacted sites. Environ Toxicol Chem 2019;00:1-9. © 2019 SETAC.

Measuring Total PFASs in Water: The Tradeoff between Selectivity and Inclusivity

Millions of people around the world may be exposed to drinking water impacted by per- and polyfluoroalkyl substances (PFASs) at levels exceeding local or national advisories. Many studies indicate that the full extent of PFAS contamination is significantly underestimated when only targeted analytical methods are used. Here, we review techniques using bulk organofluorine measurement to quantify the (as of yet) unidentified fraction of PFASs. We discuss advantages and disadvantages of specific approaches and their applicability to water analysis with a focus on the tradeoff between selectivity and inclusivity, and provide suggestions for a path forward to better characterize the wide array of PFASs present in environmental samples.

Highly selective fluorescent visual detection of perfluorooctane sulfonate via blue fluorescent carbon dots and berberine chloride hydrate

As a kind of emerging persistent organic pollutants, perfluorooctane sulfonate (PFOS) and its salts have caused global ecosystem pollution. To develop rapid, sensitive and low-cost detection method of PFOS is of great importance. In this work, a novel sensing method has been proposed for the highly selective fluorescent visual detection of PFOS in aqueous solution based on carbon dots (CDs) and berberine chloride hydrate (BH). It was found that the fluorescence of CDs decreased apparently in the presence of berberine chloride hydrate in pH 6.09 Britton-Robinson (BR) buffer solution. When PFOS was added to the system, the fluorescence was restored slightly at 448 nm and enhanced apparently at 533 nm, but no phenomenon occurred with other perfluorinated compounds. As a consequence, an obviously distinguishable fluorescence color variation (from blue to light yellow) of solution was observed. Under the optimized experimental conditions, the enhanced fluorescence intensities at 533 nm are in proportion to the concentration of PFOS in the range of 0.22-50.0 μmol/L (R² = 0.9919), with a detection limit of 21.7 nmol/L (3σ). The proposed approach has been successfully applied to the detection of PFOS in environmental water samples with RSD ≤ 1.1%.

Practical application of 1 H benchtop NMR spectroscopy for the characterization of a nonaqueous phase liquid from a contaminated environment

Nonaqueous phase liquids (NAPLs) located at the surface of the water table and/or below the water table are often a significant source for groundwater contamination near current or former commercial/industrial facilities. Due to the complex and long history of many industrial sites, these NAPLs often contain a complex mixture of contaminants and as such can be difficult to fully characterize using conventional analytical methods. Remediation and risk assessment activities at sites containing NAPLs may, subsequently, be hindered as the contamination profile may not be fully understood. This paper demonstrates the application of bench-scale 1 H nuclear magnetic resonance (NMR) spectroscopy as a practical tool to assist with the characterization of complex NAPLs. Here, a NAPL collected from a contaminated site situated near a former chemical manufacturing facility was analyzed using a combination of one-dimensional (1D) 1 H NMR spectroscopy and two-dimensional (2D) 1 H J-resolved spectroscopy (JRES). It is shown that 1D NMR experiments are useful in the rapid identification of the classes of compounds present, whereas 2D JRES NMR experiments are useful in identifying specific compounds. The use of benchtop NMR spectroscopy as a simple and cost effective tool to assist in the analysis of contaminated sites may help improve the practical characterization of many heavily contaminated sites and facilitate improved risk assessments and remedial strategies.

Evaluation and Management Strategies for Per- and Polyfluoroalkyl Substances (PFASs) in Drinking Water Aquifers: Perspectives from Impacted U.S. Northeast Communities

BACKGROUND

Multiple Northeast U.S. communities have discovered per- and polyfluoroalkyl substances (PFASs) in drinking water aquifers in excess of health-based regulatory levels or advisories. Regional stakeholders (consultants, regulators, and others) need technical background and tools to mitigate risks associated with exposure to PFAS-affected groundwater.

OBJECTIVES

The aim was to identify challenges faced by stakeholders to extend best practices to other regions experiencing PFAS releases and to establish a framework for research strategies and best management practices.

METHODS AND APPROACH

Management challenges were identified during stakeholder engagement events connecting attendees with PFAS experts in focus areas, including fate/transport, toxicology, and regulation. Review of the literature provided perspective on challenges in all focus areas. Publicly available data were used to characterize sources of PFAS impacts in groundwater and conduct a geospatial case study of potential source locations relative to drinking water aquifers in Rhode Island.

DISCUSSION

Challenges in managing PFAS impacts in drinking water arise from the large number of relevant PFASs, unconsolidated information regarding sources, and limited studies on some PFASs. In particular, there is still considerable uncertainty regarding human health impacts of PFASs. Frameworks sequentially evaluating exposure, persistence, and treatability can prioritize PFASs for evaluation of potential human health impacts. A regional case study illustrates how risk-based, geospatial methods can help address knowledge gaps regarding potential sources of PFASs in drinking water aquifers and evaluate risk of exposure.

CONCLUSION

Lessons learned from stakeholder engagement can assist in developing strategies for management of PFASs in other regions. However, current management practices primarily target a subset of PFASs for which in-depth studies are available. Exposure to less-studied, co-occurring PFASs remains largely unaddressed. Frameworks leveraging the current state of science can be applied toward accelerating this process and reducing exposure to total PFASs in drinking water, even as research regarding health effects continues. https://doi.org/10.1289/EHP2727.

Validation and determination of nine PFCS in surface water and sediment samples using UPLC-QTOF-MS

In this study, an analytical method for the routine determination of nine perfluorinated compounds (PFCs), using ultra performance liquid chromatography coupled to a quadrupole time-of-flight mass spectrometer (UPLC-QTOF-MS), was developed, validated, and used for their assay in surface water and sediments. The method yielded good linearity with a correlation coefficient (R²) ranging between 0.991 and 0.999 for all the compounds investigated. Limits of detection (LOD) ranged between 0.02 and 0.08 ng/l, while the limit of quantification (LOQ) ranged from 0.065 to 0.261 ng/l. Recovery studies were carried out in replicate assays, and percentage recoveries ranged between 56 and 112% for the nine perfluorinated compounds investigated. The method was applied to determine levels of perflurooctanoic acid (PFOA) and PFOS in surface water and sediment samples collected along the Plankenburg River in Stellenbosch, South Africa. Samples were pre-treated, extracted, and cleaned up via offline solid-phase extraction (SPE) procedures, using hydrophilic-lipophilic balance (HLB) C-18 cartridges. Levels of PFOA and PFOS found in surface water ranged between (12.8 ± 4.24 and 62.62 ± 4.86 ng/l) and (<LOD and 3.8 ng/l), respectively, while levels measured in corresponding sediment samples ranged between 0.14-0.33 ng/g (PFOA) and <LOD and 0.7 ± 0.013 ng/g (PFOS). Concentrations of PFOA and PFOS were suspected to be associated with anthropogenic activities in the vicinity of the sampling areas.

Mechanochemical mineralization of "very persistent" fluorocarbon surfactants ‒ 6:2 fluorotelomer sulfonate (6:2FTS) as an example

Fluorinated organic chemicals have a wide variety of industrial and consumer applications. For long time perfluorooctane sulfonate and perfluorooctanoic acid have been used as precursors for manufacture of such chemicals. However, these C₈ chain compounds have been demonstrated to be toxic, persistent, and bioaccumulative, thus inducing their phase-out. Currently, C₆ telomer based fluorocarbon surfactants are considered better alternatives to C₈ products because of their low bioaccumulability. But, their high persistency suggests that in the near future their concentrations will increase in the environment and in industrial waste. Being a solid state non-thermal technology, mechanochemical treatment is a good candidate for the destruction of emerging C₆ fluorotelomers in solid waste. In the present study, 6:2 fluorotelomer sulfonate is effectively destroyed (~100%) in rapid manner (<1 h) by high energy ball milling with KOH. Stoichiometric fluoride formation confirms its entire mineralization, assuring that no toxic by-products are generated. Reaction mechanism and kinetics indicate that effective mineralization of the perfluorinated moiety is obtained thanks to a rapid CF₂ "flake-off" process through radical mechanism.

Certain Perfluoroalkyl and Polyfluoroalkyl Substances Associated with Aqueous Film Forming Foam Are Widespread in Canadian Surface Waters

The presence of perfluoroalkyl and polyfluoroalkyl substances (PFASs) commonly associated with aqueous film forming foams (AFFFs) at sites without known AFFF contamination is a largely unexplored area, which may reveal widespread environmental contaminants requiring further investigation. Sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening for 23 classes of PFASs, followed by quantitative analysis was used to investigate surface waters from rural, urban, and AFFF-impacted sites in Canada. The PFASs detected included perfluorohexane sulfonamide (FHxSA), 6:2 fluorotelomer sulfonamide (FTSAm), fluorotelomer sulfonamide alkylbetaines (FTABs), fluorotelomer betaines (FTBs), 6:2 fluorotelomer mercaptoalkylamido sulfonate sulfone (FTSAS-SO₂), 6:2 fluorotelomerthiohydroxyl ammonium sulfoxide (FTSHA-SO), 6:2 fluorotelomer sulfonamide alkylamine (FTAA) and C3 to C6 perfluoroalkane sulfonamido amphoterics. Detection of FHxSA in all urban and AFFF-impacted sites (0.04-19 ng/L) indicates the widespread presence of rarely considered perfluorohexanesulfonate (PFHxS) precursors in Canadian waters. FTABs and FTBs were especially abundant with up to 16-33 ng/L of 6:2 FTAB in urban and AFFF-impacted water suggesting it may have additional applications, while FTBs were only in AFFF-impacted sites (qualitative; ∑FTBs 80 ng/L). The distributions of PFASs moving downstream along the AFFF-impacted Welland River and between water and sediment suggested differences in the persistence of various AFFF components and enhanced sorption of long-chain fluorotelomer betaines. Total organofluorine combustion-ion chromatography (TOF-CIC) revealed that fluorotelomer betaines were a substantial portion of the organofluorine in some waters and 36-99.7% of the total organofluorine was not measured in the targeted analysis.