Synthesis, Characterization, and Application of Eu(III), Tb(III), Sm(III), and Dy(III) Lanthanide Chelate Nanoparticle Labels

NIR-triggered upconversion and sensitized NIR-emission in Yb-based Eosin Y lake doped latex nanoparticles

Here, Yb-based Eosin Y lakes (EOS-Yb) have been encapsulated in organic nanoparticles (NPs) by microemulsion radical polymerization of methacrylate-based copolymers. These photoactive EOS-Yb NPs emit in the visible and near infrared (NIR) upon excitation at 530 nm and can also display NIR-to-visible upconversion emission upon excitation at 980 nm.

Magnetic separation-enhanced photoluminescence detection of dipicolinic acid and quenching detection of Cu(II) ions

Dipicolinic acid (DPA) is a chelate capable of binding to a variety of lanthanide ions to make them luminescent in the visible range. Based on this property and also assisted by magnetic separation, we report a strategy for the sensitive detection of DPA. Poly(acrylic acid)-coated iron oxide nanoparticles (IONPs) serve as a magnetic carrier to deliver only a necessary amount of Tb3+ ions to DPA in a sample solution. This enables photoluminescence measurement of the Tb3+-DPA complex with minimal background noise. The obtained detection limit, which is as low as 0.236 nM, is more than two orders of magnitude lower than that of the assay not assisted by magnetic separation. Not only does this method possess a potential for diagnosing anthrax, given that DPA is a major constituent of Bacillus anthracis spores, but it is also useful for detecting aqueous Cu2+ ions through the luminescence quenching effect. High sensitivity with a detection limit of 54 nM [Cu2+] is demonstrated using the Eu3+-DPA complex.

High brightness red emitting polymer beads for immunoassays: Comparison between trifluoroacetylacetonates of Europium

Efficiently luminescing spherical polymer particles (beads) in the nanoscale regime of up to approximately 250 nm have become very valuable tools in bioanalytical assays. Eu³⁺- complexes imbedded in polymethacrylate and polystyrene in particular proved to be extraordinarily useful in sensitive immunochemical and multi-analyte assays, and histo- and cytochemistry. Their obvious advantages derive from both, the possibility to realize very high ratios of emitter complexes to target molecules, and the intrinsically long decay times of the Eu³⁺-complexes, which allows an almost complete discrimination against bothersome autofluorescence via time-gated measuring techniques; the narrow line emission in conjunction with large apparent Stokes shifts are additional benefits with regard to spectral separation of excitation and emission with optical filters. Last but not least, a reasonable strategy to couple the beads to the analytes is mandatory. We have thus screened a variety of complexes and ancillary ligands; the four most promising candidates evaluated and compared to each other were β-diketonates (trifluoroacetylacetonates, R-CO-CH-CO-CF₃, R = - thienyl, -phenyl, -naphthyl and -phenanthryl); highest solubilities in polystyrene were obtained with trioctylphosphine co-ligands. All beads had overall quantum yields in excess of 80% as dried powders and lifetimes well beyond 600 µs. Core-shell particles were devised for the conjugation to model proteins (Avidine, Neutravidine). Their applicability was tested in biotinylated titer plates using time gated measurements and a Lateral Flow Assay as practical examples.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Luminescent lanthanide nanoparticle-based imaging enables ultra-sensitive, quantitative and multiplexed in vitro lateral flow immunoassays

Lateral Flow Assays (LFAs) have been extensively used on-site to rapidly detect analytes, possibly in complex media. However, standard gold nanoparticle-based LFAs lack sensitivity and cannot provide quantitative measurements with high accuracy. To overcome these limitations, we image lanthanide-doped nanoparticles (YVO₄:Eu 40%) as new luminescent LFA probes, using a homemade reader coupled to a smartphone and propose an original image analysis allowing strip quantification regardless of the shape of the test band signal. This method is demonstrated for the detection of staphylococcal enterotoxins SEA, SEG, SEH, and SEI. A systematic comparison to state-of-the-art gold nanoparticle-based LFA revealed an analytical sensitivity enhancement of at least one order of magnitude. We furthermore provided measurements of absolute toxin concentration over two orders of magnitude and demonstrated simultaneous quantitative detection of multiple toxins with unaltered sensitivity. In particular, we reached concentrations 100 times lower than the ones reported in the literature for on-site multiplexed LFA targeting enterotoxins. Altogether, these results highlight that our luminescent nanoparticle-based method provides a powerful and versatile on-site framework to detect multiple biomolecules with sensitivity approaching that obtained by ELISA. This paves the way to a change of paradigm in the field of analytical immunoassays by providing fast in situ quantitative high sensitivity detection of biomarkers or pathogens.

Synthesis of Silica Nanoparticles with Physical Encapsulation of Near-Infrared Fluorescent Dyes and Their Tannic Acid Coating

This study reports a novel method for the synthesis of silica nanoparticles (NPs) encapsulating near-infrared (NIR) fluorescent dyes through physical adsorption. Although a NIR cationic fluorescent dye, oxazine 725 (OXA), has no chemical bonding moiety toward silica NPs such as the triethoxysilyl group, the dyes were successfully incorporated into silica NPs without denaturation under the mild reaction conditions. Next, tannic acid (TA) molecules were coated in the presence of Fe³⁺ on the particle surface for the functionalization of silica NPs encapsulating OXA (OXA@SiO₂ NPs). The TA coating on the surface of OXA@SiO₂ NPs was confirmed by transmission electron microscopy and X-ray photoelectron spectroscopy. The TA coating significantly contributed to the resistance improvement against photobleaching and leakage of the dyes in the NPs. Furthermore, the obtained TA-coated silica NPs encapsulating OXAs (OXA@SiO₂@TA NPs) were used for the fluorescence imaging of African green monkey kidney (COS-7) cells, and it was shown that the fluorescence originated from OXA@SiO₂@TA NPs was clearly observed in the COS-7 cells.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

1,3-Diketone Calix[4]arene Derivatives-A New Type of Versatile Ligands for Metal Complexes and Nanoparticles

The present review is aimed at highlighting outlooks for cyclophanic 1,3-diketones as a new type of versatile ligands and building blocks of the nanomaterial for sensing and bioimaging. Thus, the main synthetic routes for achieving the structural diversity of cyclophanic 1,3-diketones are discussed. The structural diversity is demonstrated by variation of both cyclophanic backbones (calix[4]arene, calix[4]resorcinarene and thiacalix[4]arene) and embedding of different substituents onto lower or upper macrocyclic rims. The structural features of the cyclophanic 1,3-diketones are correlated with their ability to form lanthanide complexes exhibiting both lanthanide-centered luminescence and magnetic relaxivity parameters convenient for contrast effect in magnetic resonance imaging (MRI). The revealed structure–property relationships and the applicability of facile one-pot transformation of the complexes to hydrophilic nanoparticles demonstrates the advantages of 1,3-diketone calix[4]arene ligands and their complexes in developing of nanomaterials for sensing and bioimaging.

Development of a Homogeneous Time-Resolved Fluorescence Resonance Energy Transfer (TR-FRET) Assay for the Inhibition of Keap1-Nrf2 Protein-Protein Interaction

The transcription factor, nuclear factor erythroid 2-related factor 2 (Nrf2), plays a major role in regulating the antioxidant defense system through the Kelch-like ECH-associated protein 1-Nrf2-antioxidant response element (Keap1-Nrf2-ARE) pathway. Small-molecule inhibitors targeting Keap1-Nrf2 protein-protein interaction (PPI) decrease the rate of Nrf2 degradation by the 26S proteasome and thus increase the intracellular level of Nrf2, which translocates into the nucleus, leading to upregulated expression of cytoprotective and antioxidant enzymes. Such inhibitors can be developed into potential preventive and therapeutic agents of diseases caused by oxidative damage. To more effectively identify promising Nrf2 activators through the inhibition of Keap1-Nrf2 PPI, a homogeneous time-resolved fluorescence resonance energy transfer (TR-FRET) assay was developed in this work by indirectly labeling the Keap1 Kelch domain protein with Tb-anti-His antibody as the donor and using, as the acceptor, fluorescein isothiocyanate (FITC)-labeled 9mer Nrf2 peptide amide, the same fluorescent probe that was used in an earlier fluorescence polarization (FP) assay. Assay conditions, including concentrations of the various components, buffer type, and incubation time, were optimized in the TR-FRET competition assay with known small-molecule inhibitors of Keap1-Nrf2 PPI. Under the optimized conditions, the Keap1-Nrf2 TR-FRET assay exhibited great sensitivity with a high dynamic range and considerable stability for as long as 5 h. The Z' factor was determined to be 0.82, suggesting that the assay is suitable for high-throughput screening and lead optimization of inhibitors of Keap1-Nrf2 PPI. Furthermore, the TR-FRET assay is capable of differentiating potent inhibitors of Keap1-Nrf2 PPI down to the subnanomolar inhibition constant (Ki) range.

Time-Resolved Fluorescence Immunochromatography Assay (TRFICA) for Aflatoxin: Aiming at Increasing Strip Method Sensitivity

Aflatoxin is the most harmful mycotoxin that is ubiquitous in foods and agro-products. Because of its high toxicity, maximum admissible levels of aflatoxins (AF) is regulated worldwide, and monitoring of their occurrence in several commodities is mandatory for assuring food safety and consumers' health. Considering that the strip method is very simple and convenient for users, in order to enhance strip assay's sensitivity, a lot of time-resolved fluorescence immunochromatography assays (TRFICAs) were developed recently with increasing several times of assay sensitivity compared with traditional gold nanoparticle-based strip assay (GNP-SA). This review briefly describes the newly developed TRFICA for aflatoxin determination, including TRFICA for aflatoxin B1 (AFB1) detection, TRFICA for aflatoxin M1 (AFM1) detection, TRFICA for total aflatoxins (AFB1 + B2 + G1 + G2) detection and the latest identification-nanobody-based TRFICA for aflatoxin detection. The application of TRFICA for aflatoxin detection in different agro-products is also concluded in this review. Reasonably, TRFICA has been becoming one of the most important tool for monitoring aflatoxin in foods and agro-products.

Inorganic Complexes and Metal-Based Nanomaterials for Infectious Disease Diagnostics

Infectious diseases claim millions of lives each year. Robust and accurate diagnostics are essential tools for identifying those who are at risk and in need of treatment in low-resource settings. Inorganic complexes and metal-based nanomaterials continue to drive the development of diagnostic platforms and strategies that enable infectious disease detection in low-resource settings. In this review, we highlight works from the past 20 years in which inorganic chemistry and nanotechnology were implemented in each of the core components that make up a diagnostic test. First, we present how inorganic biomarkers and their properties are leveraged for infectious disease detection. In the following section, we detail metal-based technologies that have been employed for sample preparation and biomarker isolation from sample matrices. We then describe how inorganic- and nanomaterial-based probes have been utilized in point-of-care diagnostics for signal generation. The following section discusses instrumentation for signal readout in resource-limited settings. Next, we highlight the detection of nucleic acids at the point of care as an emerging application of inorganic chemistry. Lastly, we consider the challenges that remain for translation of the aforementioned diagnostic platforms to low-resource settings.

Sensitive prostate specific antigen quantification using dihydrolipoic acid surface-functionalized phosphorescent quantum dots

Herein, high-quality Mn-doped ZnS quantum dots (QDs) have been synthesized using a facile approach directly in aqueous media. The surface of the obtained QDs was further modified by cap-exchange of the native cysteine shell with dihydrolipoic acid (DHLA) ligands resulting in nanocrystals with high water-stability having an intense phosphorescent signal. Covalent bioconjugation of the DHLA-coated nanoparticles with an anti-IgG antibody was then carried out. Interestingly the QD immunoprobe (QD-labelled antibodies) maintained an intense phosphorescence emission, without any significant spectral-shift (as compared to the free QDs). Coupling of an asymmetric flow field flow fractionation technique to an elemental mass spectrometry detection enabled the accurate determination of the efficiency of the bioconjugation reaction. The obtained nanoparticle-antibody bioconjugate was then applied to develop a quantitative sandwich-type phosphorescent immunoassay for Prostate Specific Antigen (PSA), and a limit of detection (LOD) of 17 pg mL^-1 of PSA was achieved and allow to quantify such biomarker in samples within clinically relevant levels. Finally, the assay was validated for the quantification of PSA in the cellular media of prostate cancer cells. Obtained results proved the robustness of the proposed immunoassay based on long-lived phosphorescence measurements against eventual photoluminescent interferences significantly affecting the conventional short-lived fluorescence detection.

Bacteriophages as Factories for Eu2O3 Nanoparticle Synthesis

The use of phage display to identify peptides with an ability to bind and synthesize Eu₂O₃ nanoparticles is demonstrated in this report. This is the first report of modified phages specifically binding a lanthanide. The peptides exposed on virions revealed very strong binding to Eu₂O₃ nanoparticles and the ability to catalyze Eu₂O₃ nanoparticles' formation from Eu(OH)₃ and Eu(NO₃)₃ solutions. The luminescence emission spectrum of Eu³⁺ ions indicated that these ions existed mostly in sites deviated from the inversion symmetry in crystalline Eu₂O₃ aggregates and gelatinous Eu(OH)₃ precipitate. The ability of phage-displayed peptides to catalyze formation of Eu₂O₃ nanoparticles provides a useful tool for a low-cost and effective synthesis of lanthanide nanoparticles, which serve as attractive biomedical sensors or fluorescent labels, among their other applications.

Sensitive detection of protein biomarkers using silver nanoparticles enhanced immunofluorescence assay

Detection of biomarkers is extremely important for the early diagnosis of diseases. Here, we developed an easy and highly sensitive fluorescence detection system for the determination of biomarkers by combining the rapid separation of magnetic beads and silver nanoparticles labeled antibodies. An ultrasensitive silver ions fluorescence probe 3', 6'-bis (diethylamino)-2-(2-iodoethyl) spiro[isoindoline-1, 9'-xanthen]-3-one (Ag+-FP) was applied to immunoassay. A significant signal amplification was achieved as the AgNPs can be dissolved by H2O2 and generate numerous Ag+, which would turn "on" the fluorescence of Ag+-FP. Using α-fetoprotein (AFP) and C-reactive protein (CRP) as target analytes, good linear responses were obtained from 0.1 to 10 ng mL-1 and the limits of detection (LOD) were as low as 70 pg·mL-1 and 30 pg·mL-1, respectively. In addition, the developed system was further evaluated for the detection of real samples including 30 positive serum specimens obtained from hepatocarcinoma patients and 20 negative serum samples, and performs as well as the commercial electrochemiluminescence immunoassay (ECLI) method with less cost and more convenience. Thus, the designed detection system can be used as a promising platform for the detection of a variety of biomarkers and served as a powerful tool in clinical diagnosis.

Ultrasensitive Luminescent In Vitro Detection for Tumor Markers Based on Inorganic Lanthanide Nano-Bioprobes

Ultrasensitive and accurate detection of tumor markers is of vital importance for the screening or diagnosis of cancers at their early stages and for monitoring cancer relapse after surgical resection. Inorganic lanthanide (Ln3+) nanoparticles (NPs), owing to their superior physicochemical characteristics, are regarded as a new generation of luminescent nano-bioprobes in the field of cancer diagnosis and therapy. In this progress report, a focus is set on our recent efforts on the development of inorganic Ln3+-NPs as efficient luminescent nano-bioprobes for the ultrasensitive in vitro biodetection of tumor markers, with an emphasis on the dissolution-enhanced luminescent bioassay (DELBA), an emerging technique recently developed toward practical medical applications.

Influence of Shell Formation on Morphological Structure, Optical and Emission Intensity on Aqueous Dispersible NaYF4:Ce/Tb Nanoparticles

A highly water-dispersible NaYF4:Ce/Tb (core), NaYF4:Ce/Tb@NaYF4(core/shell) and NaYF4:Ce/Tb@NaYF4@SiO2 (core/shell/SiO2) nanoparticles (NPs) were synthesized via a general synthesis approach. The growth of an inert NaYF4 and silica shell (~14 nm) around the core-NPs resulted in an increase of the average size of the nanopaticles as well as broadening of their size distribution. The optical band-gap energy slightly decreases after shell formation due to the increase the crystalline size. To optimize the influence of shell formation a comparative analysis of photoluminescence properties (excitation, emission, and luminescence decay time) of the core, core/shell, and core/shell/SiO2 NPs were measured. The emission intensity was significantly enhanced after inert shell formation around the surface of the core NPs. The Commission International de l'Eclairage chromaticity coordinates of the emission spectrum of core, core/shell, core/shell/SiO2 NPs lie closest to the standard green color emission at 545 nm. By quantitative spectroscopic measurements of surface-modified core-NPs, it was suggested that encapsulation with inert and silica layers was found to be effective in retaining both luminescence intensity and dispersibility in aqueous environment. Considering the high aqueous dispersion and enhanced luminescence efficiency of the core-NPs make them an ideal luminescent material for luminescence bioimaging and optical biosensors.

Recent Advances on Luminescent Enhancement-Based Porous Silicon Biosensors

Luminescence-based detection paradigms have key advantages over other optical platforms such as absorbance, reflectance or interferometric based detection. However, autofluorescence, low quantum yield and lack of photostability of the fluorophore or emitting molecule are still performance-limiting factors. Recent research has shown the need for enhanced luminescence-based detection to overcome these drawbacks while at the same time improving the sensitivity, selectivity and reducing the detection limits of optical sensors and biosensors. Nanostructures have been reported to significantly improve the spectral properties of the emitting molecules. These structures offer unique electrical, optic and magnetic properties which may be used to tailor the surrounding electrical field of the emitter. Here, the main principles behind luminescence and luminescence enhancement-based detections are reviewed, with an emphasis on europium complexes as the emitting molecule. An overview of the optical porous silicon microcavity (pSiMC) as a biosensing platform and recent proof-of-concept examples on enhanced luminescence-based detection using pSiMCs are provided and discussed.

Lanthanide chelate-encapsulated polystyrene nanoparticles for rapid and quantitative immunochromatographic assay of procalcitonin

Procalcitonin (PCT) is a potentially specific early marker of bloodstream infection and sepsis.

A Novel Europium Chelate Coated Nanosphere for Time-Resolved Fluorescence Immunoassay

A novel europium ligand 2,2',2'',2'''-(4,7-diphenyl-1,10-phenanthroline-2,9-diyl) bis (methylene) bis (azanetriyl) tetra acetic acid (BC-EDTA) was synthesized and characterized. It shows an emission spectrum peak at 610 nm when it is excited at 360 nm, with a large Stock shift (250 nm). It is covalently coated on the surface of a bare silica nanosphere containi free amino groups, using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-Hydroxysuccinimide. We also observed an interesting phenomenon that when BC-EDTA is labeled with a silica nanosphere, the chelate shows different excitation spectrum peaks of about 295 nm. We speculate that the carboxyl has a significant influence on its excitation spectrum. The BC-EDTA/Eu3+coated nanosphere could be used as a fluorescent probe for time-resolved fluorescence immunoassay. We labeled the antibody with the fluorescent nanosphere to develop a nanosphere based hepatitis B surface antigen as a time-resolved fluorescence immunoassay reagent, which is very easy to operate and eliminates potential contamination of Eu3+ contained in the environment. The analytical and functional sensitivities are 0.0037 μg/L and 0.08 μg/L (S/N≥2.0) respectively. The detection range is 0.08-166.67 μg/L, which is much wider than that of ELISA (0.2-5 μg/L). It is comparable to the commercial dissociation-enhanced lanthanide fluoro-immunoassay system (DELFIA) reagents (0.2-145 μg/L). We propose that it can fulfill clinical applications.

Luminescent lanthanide nanomaterials: an emerging tool for theranostic applications

Lanthanide materials have been gaining popularity for use in various theranostic applications, primarily due to their unique optical properties such as narrow emission bands, multiple emission wavelengths, emission tunability, long fluorescence lifetime and large Stokes shift. Apart from these, some lanthanide materials also exhibit magnetic and light-up conversion properties. Such nanomaterials have been used for a wide range of applications ranging from detection of biomarkers, in vitro and in vivo imaging to therapeutic applications. Recently, combined modalities of lanthanide nanomaterials for simultaneous detection/imaging and delivery of therapeutic agents (termed ‘theranostics’) have been explored. The various advantages and disadvantages of using lanthanide nanomaterials as theranostic agents and potential areas for future development have been discussed in this review.

A luminescent europium MOF containing Lewis basic pyridyl site for highly selective sensing of o-, m- and p-nitrophenol

A new Eu–MOF constructed by a multidentate ligand with a Lewis basic pyridyl site shows highly luminescent selective sensing of the o-, m- and p-nitrophenol.

Fluorescent silica nanoparticles modified chemically with terbium complexes as potential bioimaging probes: their fluorescence and colloidal properties in water

Highly fluorescent silica nanoparticles were synthesized using silylated terbium complexes, which were prepared easily through formation of a Schiff base.

Lanthanide luminescence enhancements in porous silicon resonant microcavities

In this paper, the covalent immobilization and luminescence enhancement of a europium (Eu(III)) complex in a porous silicon (pSi) layer with a microcavity (pSiMC) structure are demonstrated. The alkyne-pendant arm of the Eu(III) complex was covalently immobilized on the azide-modified surface via ligand-assisted "click" chemistry. The design parameters of the microcavity were optimized to obtain an efficient luminescence-enhancing device. Luminescence enhancements by a factor of 9.5 and 3.0 were observed for Eu(III) complex bound inside the pSiMC as compared to a single layer and Bragg reflector of identical thickness, respectively, confirming the increased interaction between the immobilized molecules and the electric field in the spacer of the microcavity. When comparing pSiMCs with different resonance wavelength position, luminescence was enhanced when the resonance wavelength overlapped with the maximum emission wavelength of the Eu(III) complex at 614 nm, allowing for effective coupling between the confined light and the emitting molecules. The pSiMC also improved the spectral color purity of the Eu(III) complex luminescence. The ability of a pSiMC to act as an efficient Eu(III) luminescence enhancer, combined with the resulting sharp linelike emission, can be exploited for the development of ultrasensitive optical biosensors.

Europium-complex-grafted polymer dots for amplified quenching and cellular imaging applications

We report on a europium-complex-grafted polymer for preparing stable nanoparticle probes with high luminescence brightness, narrow emission bandwidth, and long luminescence lifetimes. A Eu complex bearing an amino group was used to react with a functional copolymer poly(styrene-co-maleic anhydride) by the spontaneous amidation reaction, producing the polymer grafted with Eu complexes in the side chains. The Eu-complex-grafted polymer was further used to prepare Eu-complex-grafted polymer dots (Pdots) and Eu-complex-blended poly(9-vinylcarbazole) composite Pdots, which showed improved colloidal stability as compared to those directly doped with Eu-complex molecules. Both types of Pdots can be efficiently quenched by a nile blue dye, exhibiting much lower detection limit and higher quenching sensitivity as compared to free Eu-complex molecules. Steady-state spectroscopy and time-resolved decay dynamics suggest the quenching mechanism is via efficient fluorescence resonance energy transfer from the Eu complex inside a Pdot to surface dye molecules. The amplified quenching in Eu-complex Pdots, together with efficient cell uptake and specific cell surface labeling observed in mammalian cells, suggests their potential applications in time-resolved bioassays and cellular imaging.

Biomolecule detection in porous silicon based microcavitiesviaeuropium luminescence enhancement

The ability of a porous silicon microcavity (pSiMC) to act as a luminescence enhancing sensor was confirmed using Eu(iii) complex labelled streptavidin as a model analyte on a biotin-modified pSiMC.

Immunological Detection and Characterization

Immunological methods have been used for viral diagnosis for more than 100 years. Although molecular methods are replacing many older methods of viral diagnosis, there is still a significant role for immunological methods to guide patient care and in the performance of epidemiologic studies. Identification of viral antigens in clinical samples can be accomplished rapidly through the use of point-of-care lateral immunoassays or through the use of more traditional immunofluorescence and enzyme immunoassays in the virology laboratory. Serological assays are also a valuable tool for the clinician and epidemiologist. Many of the available diagnostic assays have enzyme immunoassay formats, but functional assays such as hemagglutination-inhibition and neutralizing antibody tests are also available. In some instances, virus infection can be diagnosed with a single serum sample (e.g., HIV and hepatitis C virus infections) while in other instances paired sera are needed (e.g., those caused by common respiratory viruses). Point-of-care antibody assays are also available for testing blood and saliva samples for some viruses. An understanding of the principles of immunological detection methods is important in the application and interpretation of test results.

Lanthanide-doped NaScF4 nanoprobes: crystal structure, optical spectroscopy and biodetection

Trivalent lanthanide ions (Ln(3+))-doped inorganic nanoparticles (NPs) as potential luminescent bioprobes have been attracting tremendous interest because of their unique upconversion (UC) and downconversion (DC) luminescence properties. NaScF4, as an important host material, has been rarely reported and its crystal structure remains unclear. Herein, based on the single crystal X-ray diffraction, the space group of NaScF4 crystals was determined to be P31 containing multiple sites of Sc(3+) with crystallographic site symmetry of C1, which was verified by high-resolution photoluminescence spectroscopy of Eu(3+) at low temperature (10 K). Furthermore, monodisperse and size-controllable NaScF4:Ln(3+) NPs were synthesized via a facile thermal decomposition method. The biotinylated NaScF4:Er(3+)/Yb(3+) NPs were demonstrated for their applications as a heterogeneous UC luminescence bioprobe to detect avidin with a detection limit of 180 pM. After bioconjugation with amino-terminal fragment (ATF) of urokinase plasminogen activator (uPA), NaScF4:Ln(3+) NPs also exhibited specific recognition of cancer cells overexpressed with uPA receptor (uPAR, an important marker of tumor biology and metastasis), showing great potentials in tumor-targeted bioimaging.

Evaluation of triazole-chelated lanthanides as chemically stabile bioimaging agents

Europium (Eu), dysprosium (Dy), samarium (Sm), and terbium (Tb) complexes were prepared using the neutral tridentate chelator 2,6-bis(1-benzyl-1,2,3-triazol-4-yl)pyridine and one equivalent of each lanthanide salt. The physicochemical, aerodynamic, and in vitro cellular properties of each lanthanide metal complex were studied to determine their viability as cell surface fluorescent probes. Each compound was characterized by electrospray ionization mass spectroscopy (ESI-MS), ultraperformance liquid chromatography (UPLC), differential scanning calorimetry (DSC), and thermogravimetic analysis (TGA). Upon excitation at 320 nm each complex displayed characteristic lanthanide-based fluorescence emission in the visible wavelength range with stokes shifts greater than 200 nm. Each complex was found to be chemically stable when exposed to pH range of 1-11 for 72 h and resistant to photobleaching. To simulate pulmonary administration of these fluorophores, the aerodynamic properties of the Eu and Tb complexes were determined using a next generation impactor (NGI). This measurement confirmed that the complexes retain their fluorescence emission properties after nebulization. Cellular cytotoxicity was determined on A-549 lung cancer cell line using methylthiazol tetrazolium (MTT) cytotoxicity assay at 24, 48, and 72 h postexposure to the complexes. The complexes showed a dose and time-dependent effect on the percent viability of the cells.

Synthesis and characterization of Eu(III) complexes of modified cellulose and poly(N-isopropylacrylamide)

A series of thermo-responsive copolymers of poly(N-isopropylacrylamide) (PNIPAM) and cellulose were synthesized via atom transfer radical polymerization (ATRP) using N-isopropylacrylamide as the monomer, cellulose acetate as the initiator, and CuCl/tris(2-dimethylaminoethyl)amine (Me6TREN) as a catalytic system. The resulting polymers had a narrow range of polydispersity indexes 1.27-1.37, and molecular weights of 8600-17,300 g mol(-1). Novel functional complexes of cellulose-g-PNIPAM/Eu(III) with excellent thermosensitive and fluorescent properties were then formed by the chelation of copolymers and europium(III) ions. The maximum emission intensity of the complexes at 613 nm was enhanced by a factor of approximately 10 relative to that of the corresponding Eu(III) complexes. Additionally, the lower critical solution temperatures (LCSTs) of cellulose-g-PNIPAM/Eu(III) were slightly greater than those of the copolymers.

Non-emissive plastic colour filters for fluorescence detection

We report the fabrication of non-emissive short- and long-pass filters on plastic for high sensitivity fluorescence detection. The filters were prepared by overnight immersion of titania-coated polyethylene terephthalate (PET) in an appropriate dye solution - xylene cyanol for short-pass filtering and fluorescein disodium salt for long-pass filtering - followed by repeated washing to remove excess dye. The interface between the titania and the dye molecule induces efficient quenching of photo-generated excitons in the dye molecule, reducing auto-fluorescence to negligible values and so overcoming the principal weakness of conventional colour filters. Using the filters in conjunction with a 505 nm cyan light-emitting diode and a Si photodiode, dose-response measurements were made for T8661 Transfluosphere beads in the concentration range 1 × 10(9) to 1 × 10(5) beads μL(-1), yielding a limit of detection of 3 × 10(4) beads μL(-1). The LED/short-pass filter/T8661/long-pass filter/Si-photodiode combination reported here offers an attractive solution for sensitive, low cost fluorescence detection that is readily applicable to a wide range of bead-based immunodiagnostic assays.

Amine-functionalized lanthanide-doped zirconia nanoparticles: optical spectroscopy, time-resolved fluorescence resonance energy transfer biodetection, and targeted imaging

Ultrasmall inorganic oxide nanoparticles doped with trivalent lanthanide ions (Ln(3+)), a new and huge family of luminescent bioprobes, remain nearly untouched. Currently it is a challenge to synthesize biocompatible ultrasmall oxide bioprobes. Herein, we report a new inorganic oxide bioprobe based on sub-5 nm amine-functionalized tetragonal ZrO(2)-Ln(3+) nanoparticles synthesized via a facile solvothermal method and ligand exchange. By utilizing the long-lived luminescence of Ln(3+), we demonstrate its application as a sensitive time-resolved fluorescence resonance energy transfer (FRET) bioprobe to detect avidin with a record-low detection limit of 3.0 nM. The oxide nanoparticles also exhibit specific recognition of cancer cells overexpressed with urokinase plasminogen activator receptor (uPAR, an important marker of tumor biology and metastasis) and thus may have great potentials in targeted bioimaging.

Biological applications of rare-earth based nanoparticles

Biomedicine and cell and molecular biology require powerful imaging techniques of the single molecule scale to the whole organism, either for fundamental science or diagnosis. These applications are however often limited by the optical properties of the available probes. Moreover, in cell biology, the measurement of the cell response with spatial and temporal resolution is a central instrumental problem. This has been one of the main motivations for the development of new probes and imaging techniques either for biomolecule labeling or detection of an intracellular signaling species. The weak photostability of genetically encoded probes or organic dyes has motivated the interest for different types of nanoparticles for imaging such as quantum dots, nanodiamonds, dye-doped silica particles, or metallic nanoparticles. One of the most active fields of research in the past decade has thus been the development of rare-earth based nanoparticles, whose optical properties and low cytotoxicity are promising for biological applications. Attractive properties of rare-earth based nanoparticles include high photostability, absence of blinking, extremely narrow emission lines, large Stokes shifts, long lifetimes that can be exploited for retarded detection schemes, and facile functionalization strategies. The use of specific ions in their compositions can be moreover exploited for oxidant detection or for implementing potent contrast agents for magnetic resonance imaging. In this review, we present these different applications of rare-earth nanoparticles for biomolecule detection and imaging in vitro, in living cells or in small animals. We highlight how chemical composition tuning and surface functionalization lead to specific properties, which can be used for different imaging modalities. We discuss their performances for imaging in comparison with other probes and to what extent they could constitute a central tool in the future of molecular and cell biology.

Luminescent lanthanide-functionalized gold nanoparticles: exploiting the interaction with bovine serum albumin for potential sensing applications

As luminescent surface-functionalized gold nanoparticles emerged as potential powerful analytical tools in the biomedical fields, understanding the interaction of such systems with proteins has become crucial. In the present study, the interaction of luminescent water-soluble gold nanoparticles (AuNP-1·Eu-nta), obtained through the self-assembly of a naphthalene β-diketone antenna with a Eu(III) cyclen complex tethered to the gold surface via a C(12) alkyl thiol spacer, with bovine serum albumin (BSA) was investigated. The changes in the UV-visible absorption and fluorescence spectra of both the antenna and protein, as well as in the time-resolved Eu(III)-centered emission, of the resulting self-assembly were monitored, at physiological pH, as a function of the BSA concentration. We demonstrate that the Eu(III) emission arising from the self-assembly on the AuNP surface is almost completely quenched upon addition of BSA. Binding constant determination clearly showed that the sensitizing antenna was not displaced and that the quenching was the result of the interaction between the antenna and BSA. Detailed spectroscopic studies performed on the nta-BSA system brought a better insight in the strength of such interaction as well as its effect on the protein secondary structure. Finally, the information gathered on each system resulted in applying AuNP-1·Eu-nta-BSA for the luminescent detection of drugs via the perturbation of the nta-BSA interaction. Competitive titrations using ibuprofen and warfarin showed that nta was located in the binding site II of BSA and that the presence of warfarin, a site I drug, did not interfere with the detection of site II ibuprofen.

Serological responses to experimental Norwalk virus infection measured using a quantitative duplex time-resolved fluorescence immunoassay

A quantitative duplex time-resolved fluorescence assay, dissociation-enhanced lanthanide fluorescent immunoassay (DELFIA), was developed to measure Norwalk virus (NV)-specific IgA and IgG antibodies simultaneously. The duplex assay showed superior performance by detecting seroconversion following experimental NV infection at an earlier time point than a reference total immunoglobulin enzyme-linked immunosorbent assay (ELISA).