Preparing catalytic surfaces for sensing applications by immobilizing enzymes via hydrophobin layers

Biotechnological applications of amyloid fibrils

Protein aggregates and amyloid fibrils have special qualities and are used in a variety of biotechnological applications. They are extensively employed in bioremediation, biomaterials, and biocatalysis. Because of their capacity to encapsulate and release pharmaceuticals and their sensitivity to certain molecules, respectively, they are also used in drug delivery and biosensor applications. They have also demonstrated potential in the domains of food and bioremediation. Additionally, amyloid peptides have drawn interest in biological applications, especially in the investigation of illnesses like Parkinson's and Alzheimer's. The unique characteristics of amyloid fibrils, namely their mechanical strength and β-sheet structure, make them adaptable to a wide range of biotechnological uses. Even with their promise, one important factor to keep in mind before widely using modified amyloid materials is their potential toxicity. Thus, current research aims to overcome safety concerns while maximizing their potential.

Aspergillus Hydrophobins: Physicochemical Properties, Biochemical Properties, and Functions in Solid Polymer Degradation

Hydrophobins are small amphipathic proteins conserved in filamentous fungi. In this review, the properties and functions of Aspergillus hydrophobins are comprehensively discussed on the basis of recent findings. Multiple Aspergillus hydrophobins have been identified and categorized in conventional class I and two non-conventional classes. Some Aspergillus hydrophobins can be purified in a water phase without organic solvents. Class I hydrophobins of Aspergilli self-assemble to form amphipathic membranes. At the air–liquid interface, RolA of Aspergillus oryzae self-assembles via four stages, and its self-assembled films consist of two layers, a rodlet membrane facing air and rod-like structures facing liquid. The self-assembly depends mainly on hydrophobin conformation and solution pH. Cys4–Cys5 and Cys7–Cys8 loops, disulfide bonds, and conserved Cys residues of RodA-like hydrophobins are necessary for self-assembly at the interface and for adsorption to solid surfaces. AfRodA helps Aspergillus fumigatus to evade recognition by the host immune system. RodA-like hydrophobins recruit cutinases to promote the hydrolysis of aliphatic polyesters. This mechanism appears to be conserved in Aspergillus and other filamentous fungi, and may be beneficial for their growth. Aspergilli produce various small secreted proteins (SSPs) including hydrophobins, hydrophobic surface–binding proteins, and effector proteins. Aspergilli may use a wide variety of SSPs to decompose solid polymers.

The growth of marine fungi on seaweed polysaccharides produces cerato-platanin and hydrophobin self-assembling proteins

The marine fungi Paradendryphiela salina and Talaromyces pinophilus degrade and assimilate complex substrates from plants and seaweed. Additionally, these fungi secrete surface-active proteins, identified as cerato-platanins and hydrophobins. These hydrophobic proteins have the ability to self-assemble forming amyloid-like aggregates and play an essential role in the growth and development of the filamentous fungi. It is the first time that one cerato-platanin (CP) is identified and isolated from P. salina (PsCP) and two Class I hydrophobins (HFBs) from T. pinophilus (TpHYD1 and TpHYD2). Furthermore, it is possible to extract cerato-platanins and hydrophobins using marine fungi that can feed on seaweed biomass, and through a submerged liquid fermentation process. The propensity to aggregate of these proteins has been analyzed using different techniques such as Thioflavin T fluorescence assay, Fourier-transform Infrared Spectroscopy, and Atomic Force Microscopy. Here, we show that the formation of aggregates of PsCP and TpHYD, was influenced by the carbon source from seaweed. This study highlighted the potential of these self-assembling proteins generated from a fermentation process with marine fungi and with promising properties such as conformational plasticity with extensive applications in biotechnology, pharmacy, nanotechnology, and biomedicine.

Improvement Thermal Stability of D-Lactate Dehydrogenase by Hydrophobin-1 and in Silico Prediction of Protein-Protein Interactions

Hydrophobins are small surface-active proteins. They can connect to hydrophobic or hydrophilic regions and oligomerize in solution to form massive construction. In nature, these proteins are produced by filamentous fungi at different stages of growth. So far, researchers have used them in various fields of biotechnology. In this study, recombinant hydrophobin-1 (rHFB1, 7.5 kDa) was used to stabilize recombinant D-lactate dehydrogenase (rD-LDH, 35 kDa). rD-LDH is a sensitive enzyme deactivated and oxidized by external agents such as O₂ and lights. So, its stabilization with rHFB1 can be the best index to demonstrate the positive effect of rHFB1 on preserving and improving enzyme's activity. The unique ability of rHFB1 for interacting with hydrophobic regions of rD-LDH was predicted by protein-protein docking study with ClusPro and PIC servers and confirmed by fluorescence experiments, and Colorless Native-PAGE. Measurement of thermodynamic parameters allows for authenticating the role of rHFB1 as a thermal stabilizer in the protein-protein complex (rD-LDH@rHFB1). Interaction between rHFB1 and rD-LDH improved half-life of enzyme 2.25-fold at 40 °C. Investigation of the kinetic parameters proved that the presence of rHFB1 along with the rD-LDH enhancement strongly the affinity of the enzyme for pyruvate. Furthermore, an increase of Kcat/Km for complex displayed the effect of rHFB1 for improving the enzyme's catalytic efficiency.

Hydrophobin-enhanced stability, dispersions and release of curcumin nanoparticles in water

Most chemotherapeutic drugs commonly suffer from low aqueous solubility that can potentially limit drugs absorption. Drug nanomerization is an advanced approach to overcoming their poor water-solubility. In this study, class I hydrophobin recombinant HGFI (rHGFI)-based curcumin (Cur) nanoparticles (rHGFI-Cur) were prepared by freeze-drying method. The rHGFI-Cur nanocomposites were characterized by contact angle, transmission electron microscopy, fluorescence microscopy and dynamic light scattering. The results showed that rHGFI could lead to the wettability conversion and stability improved of Cur in water. X-ray photoelectron spectroscopy and Fourier transform infrared suggested that rHGFI could non-covalently bind to Cur to render them hydrophilic through hydrophobic forces. Additionally, drug release and cytotoxicity assays illustrated that rHGFI-Cur nanoparticles could facilitate Cur release and exhibited higher cytotoxicity than free Cur for human esophageal cancer cells TE-1. Thus, it suggested that rHGFI has a great potential application for hydrophobic drug delivery without toxicity.[Formula: see text].

Cell surface display of proteins on filamentous fungi

Protein display approaches have been useful to endow the cell surface of yeasts with new catalytic activities so that they can act as enhanced whole-cell biocatalysts. Despite their biotechnological potential, protein display technologies remain poorly developed for filamentous fungi. The lignocellulolytic character of some of them coupled to the cell surface biosynthesis of valuable molecules by a single or a cascade of several displayed enzymes is an appealing prospect. Cell surface protein display consists in the co-translational fusion of a functional protein (passenger) to an anchor one, usually a cell-wall-resident protein. The abundance, spacing, and local environment of the displayed enzymes-determined by the relationship of the anchor protein with the structure and dynamics of the engineered cell wall-are factors that influence the performance of display-based biocatalysts. The development of protein display strategies in filamentous fungi could be based on the field advances in yeasts; however, the unique composition, structure, and biology of filamentous fungi cell walls require the customization of the approach to those microorganisms. In this prospective review, the cellular bases, the design principles, and the available tools to foster the development of cell surface protein display technologies in filamentous fungi are discussed.

Self-Assembling Protein-Polymer Bioconjugates for Surfaces with Antifouling Features and Low Nonspecific Binding

A new method is demonstrated for preparing antifouling and low nonspecific adsorption surfaces on poorly reactive hydrophobic substrates, without the need for energy-intensive or environmentally aggressive pretreatments. The surface-active protein hydrophobin was covalently modified with a controlled radical polymerization initiator and allowed to self-assemble as a monolayer on hydrophobic surfaces, followed by the preparation of antifouling surfaces by Cu(0)-mediated living radical polymerization of poly(ethylene glycol) methyl ether acrylate (PEGA) performed in situ. By taking advantage of hydrophobins to achieve at the same time the immobilization of protein A, this approach allowed to prepare surfaces for IgG1 binding featuring greatly reduced nonspecific adsorption. The success of the surface modification strategy was investigated by contact angle, XPS, and AFM characterization, while the antifouling performance and the reduction of nonspecific binding were confirmed by QCM-D measurements.

Hydrophobins: multifunctional biosurfactants for interface engineering

Hydrophobins are highly surface-active proteins that have versatile potential as agents for interface engineering. Due to the large and growing number of unique hydrophobin sequences identified, there is growing potential to engineer variants for particular applications using protein engineering and other approaches. Recent applications and advancements in hydrophobin technologies and production strategies are reviewed. The application space of hydrophobins is large and growing, including hydrophobic drug solubilization and delivery, protein purification tags, tools for protein and cell immobilization, antimicrobial coatings, biosensors, biomineralization templates and emulsifying agents. While there is significant promise for their use in a wide range of applications, developing new production strategies is a key need to improve on low recombinant yields to enable their use in broader applications; further optimization of expression systems and yields remains a challenge in order to use designed hydrophobin in commercial applications.

Structure Formation in Class I and Class II Hydrophobins at the Air-Water Interface under Multiple Compression/Expansion Cycles

Hydrophobins are small amphiphilic fungal proteins empirically divided into two classes. We investigated the self-assembled structures of class I SC3 from S. commune and class II HFBII from T. reesei transferred to mica from the air-water interface by using the Langmuir-Schaefer (LS) technique and atomic force microscopy (AFM). The main focus is the influence of areal constraint and multiple compressions and expansions on the morphology of the protein films. SC3 shows a rather homogenous coverage of the mica surface, with fibrillary structures. Multiple compressions to a surface pressure of 13 mn m^-1 led to a shortening of the fibrils. HFBII exhibits multilayered structures of varying thickness at higher surface pressures. Multiple compressions led to a variety of large, multilayer aggregates. Several compressions and expansions homogenized the films of both types. Both proteins showed similar dendritic structures with relevant length scales of at least several hundred nanometers at pressures of 13 mn m^-1 and above, although the primary structures they assemble into are usually different in size and type, and range from fibrils to hexagonally ordered films. These dendritic structures may stem from a combination of mechanical influences, such as compressions, expansions, and the drying effect during LS transfer, which may simulate processes during physiological applications of hydrophobins, such as encapsulation or release of spores.

In situ removal of consensus dengue virus envelope protein domain III fused to hydrophobin in Pichia pastoris cultures

This work describes a novel strategy for the integrated expression and purification of recombinant proteins in Pichia pastoris cultures. Hydrophobins can be used as fusion tags, proteins fused to them alter their hydrophobicity and can be purified by aqueous two-phase systems (ATPS) based on non-ionic surfactants. Here, the consensus dengue virus envelope protein domain III fused to hydrophobin I of Trichoderma reesei was expressed in Pichia pastoris cultures and an in situ product removal by an ATPS using a non-ionic detergent, (Triton X-114) was performed. The protein was produced and purified directly from the yeast culture supernatant both efficiently and with no loss. The purified protein was properly immobilized by adsorption in solid phase and recognized by anti-dengue antibodies, showing its potential for the development of an indirect immunoassay for dengue virus.

From Protein Features to Sensing Surfaces

Proteins play a major role in biosensors in which they provide catalytic activity and specificity in molecular recognition. However, the immobilization process is far from straightforward as it often affects the protein functionality. Extensive interaction of the protein with the surface or significant surface crowding can lead to changes in the mobility and conformation of the protein structure. This review will provide insights as to how an analysis of the physico-chemical features of the protein surface before the immobilization process can help to identify the optimal immobilization approach. Such an analysis can help to preserve the functionality of the protein when on a biosensor surface.

Applications of Functional Amyloids from Fungi: Surface Modification by Class I Hydrophobins

Class I hydrophobins produced from fungi are amongst the first proteins recognized as functional amyloids. They are amphiphilic proteins involved in the formation of aerial structures such as spores or fruiting bodies. They form chemically robust layers which can only be dissolved in strong acids. These layers adhere to different surfaces, changing their wettability, and allow the binding of other proteins. Herein, the modification of diverse types of surfaces with Class I hydrophobins is reported, highlighting the applications of the coated surfaces. Indeed, these coatings can be exploited in several fields, spanning from biomedical to industrial applications, which include biosensing and textile manufacturing.

HFB7 - A novel orphan hydrophobin of the Harzianum and Virens clades of Trichoderma, is involved in response to biotic and abiotic stresses

Hydrophobins are small secreted cysteine-rich proteins exclusively found in fungi. They are able to self-assemble in single molecular layers at hydrophobic-hydrophilic interfaces and can therefore be directly involved in establishment of fungi in their habitat. The genomes of filamentous mycotrophic fungi Trichoderma encode a rich diversity of hydrophobins, which are divided in several groups based on their structure and evolution. Here we describe a new member of class II hydrophobins, HFB7, that has a taxonomically restricted occurrence in Harzianum and Virens clades of Trichoderma. Evolutionary analysis reveals that HFB7 proteins form a separate clade distinct from other Trichoderma class II hydrophobins and that genes encoding them evolve under positive selection pressure. Homology modelling of HFB7 structure in comparison to T. reesei HFB2 reveals that the two large hydrophobic patches on the surface of the protein are remarkably conserved between the two hydrophobins despite significant difference in their primary structures. Expression of hfb7 gene in T. virens increases at interactions with other fungi and a plant and in response to a diversity of abiotic stress conditions, and is also upregulated during formation of aerial mycelium in a standing liquid culture. This upregulation significantly exceeds that of expression of hfb7 under a strong constitutive promoter, and T. virens strains overexpressing hfb7 thus display only changes in traits characterized by low hfb7 expression, i.e. faster growth in submerged liquid culture. The hfb7 gene is not expressed in conidia. Our data allow to conclude that this protein is involved in defence of Trichoderma against a diversity of stress factors related to the oxidative stress. Moreover, HFB7 likely helps in the establishment of the fungus in wetlands or other conditions related to high humidity.

Analysis of the ionic interaction between the hydrophobin RodA and two cutinases of Aspergillus nidulans obtained via an Aspergillus oryzae expression system

Hydrophobins are amphipathic secretory proteins with eight conserved cysteine residues and are ubiquitous among filamentous fungi. In the fungus Aspergillus oryzae, the hydrophobin RolA and the polyesterase CutL1 are co-expressed when the sole available carbon source is the biodegradable polyester polybutylene succinate-co-adipate (PBSA). RolA promotes the degradation of PBSA by attaching to the particle surface, changing its structure and interacting with CutL1 to concentrate CutL1 on the PBSA surface. We previously reported that positively charged residues in RolA and negatively charged residues in CutL1 are cooperatively involved in the ionic interaction between RolA and CutL1. We also reported that hydrophobin RodA of the model fungus Aspergillus nidulans, which was obtained via an A. oryzae expression system, interacted via ionic interactions with CutL1. In the present study, phylogenetic and alignment analyses revealed that the N-terminal regions of several RolA orthologs contained positively charged residues and that the corresponding negatively charged residues on the surface of CutL1 that were essential for the RolA-CutL1 interaction were highly conserved in several CutL1 orthologs. A PBSA microparticle degradation assay, a pull-down assay using a dispersion of Teflon particles, and a kinetic analysis using a quartz crystal microbalance revealed that recombinant A. nidulans RodA interacted via ionic interactions with two recombinant A. nidulans cutinases. Together, these results imply that ionic interactions between hydrophobins and cutinases may be common among aspergilli and other filamentous fungi.

Recent Advances in Fungal Hydrophobin Towards Using in Industry

Fungal hydrophobin is a family of low molecular weight proteins consisting of four disulfide bridges and an extraordinary hydrophobic patch. The hydrophobic patch of hydrophobins and the molecules of gaseous CO2 may interact together and form the stable CO2-nanobubbles covered by an elastic membrane in carbonated beverages. The nanobubbles provide the required energy to provoke primary gushing. Due to the hydrophobicity of hydrophobin, this protein is used as a biosurfactant, foaming agent or encapsulating agent in food products and medicine formulations. Increasing demands for using of hydrophobins led to a challenge regarding production and purification of this product. However, the main issue to use hydrophobin in the industry is the regulatory affairs: yet there is no approved legislation for using hydrophobin in food and beverages. To comply with the legislation, establishing a consistent method for obtaining pure hydrophobins is necessary. Currently, few research teams in Europe are focusing on different aspects of hydrophobins. In this paper, an up-to-date collection of highlights from those special groups about the bio-chemical and physicochemical characteristics of hydrophobins have been studied. The recent advances of those groups concerning the production and purification, positive applications and negative function of hydrophobin are also summarised.

Heterologous expression of a hydrophobin HFB1 and evaluation of its contribution to producing stable foam

Hydrophobins are small secreted proteins belong to filamentous fungi. These proteins possess a unique ability to self-assemble at air/water interfaces. Hydrophobins have a broad range of biotechnological applications such as stabilizing emulsions and foams, immobilizing proteins on a surface, designing biosensors, affinity tag for protein purification, and drug delivery. We have successfully expressed HFB1 from Trichoderma reesei belonged to class II of hydrophobins in Pichia pastoris. The recombinant gene was under the control of the methanol-inducible AOX1 promoter (alcohol oxidase 1) in the pPICZAα vector. The amount of secreted HFB1 was increased in 90-h using methanol induction. The recombinant HFB1 was purified based on the presence of His-tag and foam formation. Furthermore, HFB1 was able to produce macro and micro stable air bubbles in the liquid due to the presence of hydrophobic patches on its surface. The liquid medium containing HFB1 becomes turbid after shaking, and then the stable bubbles are formed and remained for three weeks.

Applications of hydrophobins: current state and perspectives

Hydrophobins are proteins exclusively produced by filamentous fungi. They self-assemble at hydrophilic-hydrophobic interfaces into an amphipathic film. This protein film renders hydrophobic surfaces of gas bubbles, liquids, or solid materials wettable, while hydrophilic surfaces can be turned hydrophobic. These properties, among others, make hydrophobins of interest for medical and technical applications. For instance, hydrophobins can be used to disperse hydrophobic materials; to stabilize foam in food products; and to immobilize enzymes, peptides, antibodies, cells, and anorganic molecules on surfaces. At the same time, they may be used to prevent binding of molecules. Furthermore, hydrophobins have therapeutic value as immunomodulators and can been used to produce recombinant proteins.

Protein bodies in nature and biotechnology

Protein bodies are natural structures containing protein aggregates that exist in many organisms ranging from bacteria to mammals and plants. In bacteria they are often a phenomenon associated to over-expression of heterologous proteins. In mammals the so called Russell bodies indicate an accumulation of mutated immune globulins. In plants the protein bodies play a major role as protein storage organelle in seeds. Besides these natural cases, protein bodies can also be artificially induced primarily using self-assembling peptides. Frequently plant derived proteins such as prolamins or their derivatives are used. In some cases the help of an endoplasmatic retention signal is needed to create artificial protein bodies. The biotechnological application of protein bodies offers novel solutions such as the simplification of downstream processing in protein manufacture, the utilisation as particle for immunisation as vaccines or as carrier free self immobilised enzyme particle for many industrial catalytic processes.

Strategies and techniques to enhance the in situ endothelialization of small-diameter biodegradable polymeric vascular grafts

Due to the lack of success in small-diameter (<6 mm) prosthetic vascular grafts, a variety of strategies have evolved utilizing a tissue-engineering approach. Much of this work has focused on enhancing the endothelialization of these grafts. A healthy, confluent endothelial layer provides dynamic control over homeo-stasis, influencing and preventing thrombosis and smooth muscle cell proliferation that can lead to intimal hyperplasia. Strategies to improve endothelialization of biodegradable polymeric grafts have encompassed both chemical and physical modifications to graft surfaces, many focusing on the recruitment of endothelial and endothelial progenitor cells. This review aims to provide a compilation of current and developing strategies that utilize in situ endothelialization to improve vascular graft outcomes, providing a context for the future directions of vascular tissue-engineering strategies that do not require preprocedural cell seeding.

Phylogenetic, genomic organization and expression analysis of hydrophobin genes in the ectomycorrhizal basidiomycete Laccaria bicolor

Hydrophobins are morphogenetic, small secreted hydrophobic fungal proteins produced in response to changing development and environmental conditions. These proteins are important in the interaction between certain fungi and their hosts. In mutualistic ectomycorrhizal fungi several hydrophobins form a subclass of mycorrhizal-induced small secreted proteins that are likely to be critical in the formation of the symbiotic interface with host root cells. In this study, two genomes of the ectomycorrhizal basidiomycete Laccaria bicolor strains S238N-H82 (from North America) and 81306 (from Europe) were surveyed to construct a comprehensive genome-wide inventory of hydrophobins and to explore their characteristics and roles during host colonization. The S238N-H82 L. bicolor hydrophobin gene family is composed of 12 genes while the 81306 strain encodes nine hydrophobins, all corresponding to class I hydrophobins. The three extra hydrophobin genes encoded by the S238N-H82 genome likely arose via gene duplication and are bordered by transposon rich regions. Expression profiles of the hydrophobin genes of L. bicolor varied greatly depending on life stage (e.g. free living mycelium vs. root colonization) and on the host root environment. We conclude from this study that the complex diversity and range of expression profiles of the Laccaria hydrophobin multi-gene family have likely been a selective advantage for this mutualist in colonizing a wide range of host plants.

High-yield production of hydrophobins RodA and RodB from Aspergillus fumigatus in Pichia pastoris

Hydrophobins are small fungal proteins with amphipatic properties and the ability to self-assemble on a hydrophobic/hydrophilic interface; thus, many technical applications for hydrophobins have been suggested. The pathogenic fungus Aspergillus fumigatus expresses the hydrophobins RodA and RodB on the surface of its conidia. RodA is known to be of importance to the pathogenesis of the fungus, while the biological role of RodB is currently unknown. Here, we report the successful expression of both hydrophobins in Pichia pastoris and present fed-batch fermentation yields of 200-300 mg/l fermentation broth. Protein bands of expected sizes were detected by SDS-PAGE and western blotting, and the identity was further confirmed by tandem mass spectrometry. Both proteins were purified using his-affinity chromatography, and the high level of purity was verified by silver-stained SDS-PAGE. Recombinant RodA as well as rRodB were able to convert a glass surface from hydrophilic to hydrophobic similar to native RodA, but only rRodB was able to decrease the hydrophobicity of a Teflon-like surface to the same extent as native RodA, while rRodA showed this ability to a lesser extent. Recombinant RodA and native RodA showed a similar ability to emulsify air in water, while recombinant RodB could also emulsify oil in water better than the control protein bovine serum albumin (BSA). This is to our knowledge the first successful expression of hydrophobins from A. fumigatus in a eukaryote host, which makes it possible to further characterize both hydrophobins. Furthermore, the expression strategy and fed-batch production using P. pastoris may be transferred to hydrophobins from other species.

Hydrophobin can prevent secondary protein adsorption on hydrophobic substrates without exchange

By combining several surface analytical tools, we show that an adsorbed layer of the protein H*Protein B prevents the adsorption of secondary proteins bovine serum albumin, casein, or collagen at low-salinity conditions and at pH 8. H*Protein B is an industrially producible fusion protein of the hydrophobin family, known for its high interfacial activity. While applications of hydrophobin have been reported to facilitate adhesion of proteins under different pH conditions, careful analysis by quartz-crystal microbalance and ellipsometry prove that no additional adsorption can be found on top of the H*Protein B layer in this study. Surface analysis by X-ray photoelectron spectroscopy and secondary ion mass spectrometry proves that the hydrophobin layer stays intact even after hours of exposure to solutions of the secondary proteins and that no exchange of proteins can be detected.

Fig. 1

Creating Surface Properties Using a Palette of Hydrophobins

Small secreted proteins called hydrophobins play diverse roles in the life cycle of filamentous fungi. For example, the hydrophobin SC3 of Schizophyllum commune is involved in aerial hyphae formation, cell-wall assembly and attachment to hydrophobic surfaces. Hydrophobins are capable of self-assembly at a hydrophilic-hydrophobic interface, resulting in the formation of an amphipathic film. This amphipathic film can make hydrophobic surfaces of a liquid or a solid material wettable, while a hydrophilic surface can be turned into a hydrophobic one. These properties, among others, make hydrophobins of interest for medical and technical applications. For instance, hydrophobins can be used to purify proteins from complex mixtures; to reduce the friction of materials; to increase the biocompatibility of medical implants; to increase the solubility of water insoluble drugs; and to immobilize enzymes, for example, biosensor surfaces.

Physiologically relevant online electrochemical method for continuous and simultaneous monitoring of striatum glucose and lactate following global cerebral ischemia/reperfusion

This study demonstrates a new electroanalytical method with a high physiological relevance for simultaneous online monitoring of glucose and lactate in the striatum of the rat brain following global cerebral ischemia/reperfusion. The online analytical method is based on the efficient integration of in vivo microdialysis sampling with an online selective electrochemical detection with the electrochemical biosensors with dehydrogenases, i.e., glucose and lactate dehydrogenases, as recognition elements. The dehydrogenase-based electrochemical biosensors are developed onto the dual split-disk plastic carbon film (SPCF) electrodes with methylene green (MG) adsorbed onto single-walled carbon nanotubes (SWNTs) as the electrocatalyst for the oxidation of dihydronicotiamide adenine dinucleotide (NADH) at a low potential of 0.0 V (vs Ag/AgCl). Artificial cerebrospinal fluid (aCSF) containing NAD(+) is externally perfused from a second pump and online mixed with the brain microdialysates to minimize the variation of pH that occurred following the cerebral ischemia/reperfusion and to supply NAD(+) cofactor and O(2) for the enzymatic reactions of dehydrogenases and ascorbate oxidase, respectively. As a result, the developed online electroanalytical method exhibits a high selectivity against the electrochemically active species endogenously existing in the cerebral systems and a high tolerance against the variation of pH and O(2) following cerebral ischemia/reperfusion. This property, along with the good linearity and a high stability toward glucose and lactate as well as little cross-talk between two biosensors, substantially makes this method possible for the continuous, simultaneous, and online monitoring of glucose and lactate in the rat brain following global cerebral ischemia/reperfusion. This study establishes a new and effective platform for the investigation of the energy metabolism in physiological and pathological processes.

Mechanisms of protein adhesion on surface films of hydrophobin

Hydrophobins are adhesive proteins produced by filamentous fungi. They are in many cases secreted into the medium and adsorb readily to a number of different surfaces. They fulfill many different tasks such as the formation of various coatings and mediating adhesion of fungi to surfaces. The mechanism of how hydrophobins adhere and how they mediate fungal adhesion is of interest both from the point of view of fungal biology and for various biotechnical immobilization applications. It has been shown that hydrophobins typically form a monomolecular layer on solid substrates. We are especially interested in how a surface layer of hydrophobin can mediate the adhesion of a second layer of another protein. In this work we systematically studied how proteins adsorb onto hydrophobins that are bound as monomolecular layers on nonpolar surfaces. We found that several types of proteins readily adsorb onto hydrophobins, but only under defined conditions of pH and ionic strength. The binding conditions were also highly dependent on the adhering protein. By studying solution conditions such as pH and ionic strength, we conclude that the surface adhesion is due to selective Coulombic charge interactions. We conclude that hydrophobins can transform a nonpolar surface into one that efficiently recruits other proteins by charge interactions.

Two methods for glass surface modification and their application in protein immobilization

Protein immobilization is a crucial step in protein chip, biosensor, etc. Here, two methods to immobilize proteins on glass surface were analyzed, one is silanization method using 3-aminopropyltriethoxysilane (APTES), and the other is hydrophobin HFBI coating. The modified glass surfaces were characterized with X-ray photoelectron spectroscopy (XPS), water contact angle measurement (WCA) and immunoassay. The results of XPS and WCA illustrated that the surface property of glass can be changed by both the two methods. The following immunoassay using microcontact printing (microCP) verified that both methods could help protein immobilization effectively on glass slides. Compared with the amine treatment, it is concluded that hydrophobin self-assemblies is a simple and generic way for protein immobilization on glass slides, which has potential application in protein chips and biosensors.

Phage display cDNA cloning and expression analysis of hydrophobins from the entomopathogenic fungus Beauveria (Cordyceps) bassiana

Hydrophobins are small amphipathic proteins that function in a broad range of growth and developmental processes in fungi. They are involved in the formation of aerial structures, the attachment of fungal cells to surfaces, and act in signalling in response to surface cues and pathogenesis. Beauveria bassiana is an important entomopathogenic fungus used as an arthropod biological control agent. To examine the feasibility of using phage display technology to clone cDNAs encoding hydrophobins, biopanning experiments were performed using a variety of affinity resins, including N,N'-diacetylchitobiose-, fucose-, lactose-, maltose- and melibiose-coupled agarose beads. After five rounds of iterative biopanning, cDNAs corresponding to two B. bassiana (class I) hydrophobins were selectively enriched using melibiose- or lactose-coupled agarose beads. Expression analysis revealed that the hyd1 gene was expressed in all samples tested, including aerial conidia, in vitro blastospores, submerged conidia, and cells sporulating on chitin and insect cuticle, with hyd1 expression peaking in growing mycelia. In contrast, the hyd2 gene was not appreciably expressed in any of the single-cell types (aerial conidia, blastospores and submerged conidia), but was constitutively expressed in growing mycelia and when cells were sporulating on chitin and insect cuticle. MS fingerprinting of an approximately 10 kDa protein found in boiling SDS-insoluble, trifluoroacetic acid-soluble extracts from aerial conidia identified the major component of the B. bassiana rodlet layer to be the hyd2 gene product. These results reveal the differential regulation of the isolated hydrophobins and indicate that phage display represents a novel approach to cDNA cloning of hydrophobins.

Hydrophobins: proteins with potential

Hydrophobins are self-assembling proteins of fungal origin. Their ability to self-assemble into an amphipathic membrane is of interest for many different applications, ranging from medical and technical coatings to the production of proteinaceous glue and cosmetics. Assembled hydrophobins can modify surface characteristics, thus controling the binding properties of the surface; for example, enzymes can be actively and non-covalently immobilized on electrode surfaces and medical coatings can be improved for biocompatibility. Over the past few years research on hydrophobins has contributed to a better understanding of the self-assembly process and is generating more handles to control and manipulate the process. This knowledge could have an immediate effect on production levels, which are not yet adequate, and provide the boost needed for hydrophobins to reach their full potential.

Bioactive surface modification of mica and poly(dimethylsiloxane) with hydrophobins for protein immobilization

Bioactive surfaces with appropriate hydrophilicity for protein immobilization can be achieved by hydrophobin II (HFBI) self-assembly on mica and polydimethylsiloxane (PDMS) surfaces. X-ray photoelectron spectroscopy and water contact angle measurements illustrated that the surface wettability can be changed from superhydrophobic (PDMS) or superhydrophilic (mica) to moderately hydrophilic, which is suitable for protein (chicken IgG) immobilization on both substrate surfaces. The results suggest that HFBI assembly, one kind of hydrophobin from Trichoderma reesei, may be a versatile and convenient method for the immobilization of biomolecules on diverse substrates, which may have potential applications in biosensors, immunoassays, and microfluidic networks.

Amperometric glucose biosensor based on self-assembly hydrophobin with high efficiency of enzyme utilization

Hydrophobins are a family of natural self-assembling proteins with high biocompability, which are apt to form strong and ordered assembly onto many kinds of surfaces. These physical-chemical and biological properties make hydrophobins suitable for surface modification and biomolecule immobilization purposes. A class II hydrophobin HFBI was used as enzyme immobilization matrix on platinum electrode to construct amperometric glucose biosensor. Permeability of HFBI self-assembling film was optimized by selecting the proper HFBI concentration for electrode modification, in order to allow H(2)O(2) permeating while prevent interfering compounds accessing. HFBI self-assembly and glucose oxidase (GOx) immobilization was monitored by quartz crystal microbalance (QCM), and characterization of the modified electrode surface was obtained by scanning electron microscope (SEM). The resulting glucose biosensors showed rapid response time within 6s, limits of detection of 0.09 mM glucose (signal-to-noise ratio=3), wide linear range from 0.5 to 20mM, high sensitivity of 4.214 x 10(-3)AM(-1)cm(-2), also well selectivity, reproducibility and lifetime. The all-protein modified biosensor exhibited especially high efficiency of enzyme utilization, producing at most 712 microA responsive current for per unit activity of GOx. This work provided a promising new immobilization matrix with high biocompatibility and adequate electroactivity for further research in biosensing and other surface functionalizing.

The effect of the layer structure on the activity of immobilized enzymes in ultrathin films

The molecular engineering capability of the layer-by-layer (LbL) method for fabricating thin films has been exploited in order to immobilize glucose oxidase (GOD) in films with alternating layers of chitosan. Chitosan was proven a good scaffolding material, as GOD molecules preserved their catalytic activity towards glucose oxidation. Using electrochemical measurements, we showed that chitosan/GOD LbL films can be used to detect glucose with a limit of detection of 0.2 mmol l-1 and an activity of 40.5 microA mmol-1 L microg-1, which is highly sensitive when compared to other sensors in previous reports in the literature. The highest sensitivity of the LbL film was achieved when only the top layer contained GOD, thus indicating that GOD in inner layers did not contribute to glucose oxidation, probably because it hampers analyte diffusion and electron transport through the deposited layers. This may be explained by the dense packing of GOD molecules in the LbL films with chitosan, as inferred from estimates of the amount of GOD adsorbed per layer using a quartz crystal microbalance.

Analytical Investigation of the Interactions between SC3 Hydrophobin and Lipid Layers: Elaborating of Nanostructured Matrixes for Immobilizing Redox Systems

Hydrophobins are highly tensioactive fungal proteins with a pronounced affinity for interfaces and a propensity for self-assembly. Recently, these proteins were shown to be useful in retaining different molecules on solid surfaces. This finding offers a possibility for developing new functional materials, while creating the necessity of further research at a deeper mechanistic level. In this work, the mechanisms governing the surface phenomena were studied using native Schizophyllum commune hydrophobin (SC3) and lipid mono- and bilayers; the soft matter systems were used to get a handle on the interactive protein/interface effects at a molecular level. The results obtained indicated that the SC3/lipid membrane interactions were adjusted by protein conformational adaptation, allowing its incorporation into lipid matrixes; the incorporation of a chelating SC3 hydrophobin (PFA-SC3) in a monoolein cubic phase yielded a biomimetic, cell-like system of Cu(II) cation immobilization. This system, which is suitable for modifying electrode surface and monitoring the Cu(II)/Cu(0) redox process, may be of practical interest in switching and sensing.