Real-Time Measurement of Oligomeric Species in Secondary Organic Aerosol with the Aerosol Time-of-Flight Mass Spectrometer

Characteristics and seasonal variations of high-molecular-weight oligomers in urban haze aerosols

Organic aerosols (OA) undergo sophisticated physiochemical processes in the atmosphere, playing a crucial role in extreme haze formations over the Northern China Plain. However, current understandings of the detailed composition and formation pathways are limited. In this study, high-molecular weight (HMW) species were observed in samples collected year-round in urban Beijing, especially in autumn and winter, during 2016-2017. The positive-ion-mode mass spectra of matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) showed that higher signal intensities were obtained in the mass-to-charge (m/z) ranges of 200-500 and 800-900, with repetitive mass difference patterns of m/z 12, 14, 16, and 18. This provided sound evidence that high-molecular-weight oligomers were generated as haze episodes became exacerbated. These oligomer signal intensities were enhanced in the presence of high relative humidity, aerosol water content, and PM_2.5 (particles with an aerodynamic diameter ≤ 2.5 μm) mass, proving that the multiphase reaction processes play a fundamental role in haze formation in Beijing. Our study can form a basis for improved air pollution mitigation measures aimed at OA to improve health outcomes.

Atmospheric Chemistry in a Box or a Bag

Environmental chambers have proven to be essential for atmospheric photochemistry research. This historical perspective summarizes chamber research characterizing smog. Experiments with volatile organic compounds (VOCs)-nitrogen oxides (NOx) have characterized O3 and aerosol chemistry. These led to the creation and evaluation of complex reaction mechanisms adopted for various applications. Gas-phase photochemistry was initiated and developed using chamber studies. Post-1950s study of photochemical aerosols began using smog chambers. Much of the knowledge about the chemistry of secondary organic aerosols (SOA) derives from chamber studies complemented with specially designed atmospheric studies. Two major findings emerge from post-1990s SOA experiments: (1) photochemical SOAs hypothetically involve hydrocarbons and oxygenates with carbon numbers of 2, and (2) SOA evolves via more than one generation of reactions as condensed material exchanges with the vapor phase during “aging”. These elements combine with multiphase chemistry to yield mechanisms for aerosols. Smog chambers, like all simulators, are limited representations of the atmosphere. Translation to the atmosphere is complicated by constraints in reaction times, container interactions, influence of precursor injections, and background species. Interpretation of kinetics requires integration into atmospheric models addressing the combined effects of precursor emissions, surface exchange, hydrometeor interactions, air motion and sunlight.

Spiers Memorial Lecture. Introductory lecture: chemistry in the urban atmosphere

The urban atmosphere is characterised by a multitude of complex processes. Gaseous and particulate components are continuously emitted into the atmosphere from many different sources. These components are then dispersed in the urban atmosphere via turbulent mixing. Numerous chemical reactions modify the gas phase chemistry on multiple time scales, producing secondary pollutants. Through partitioning, the chemical and physical properties of the aerosol particles are also constantly changing as a consequence of dispersion and gas phase chemistry. This review presents an overview of the involved processes, focusing on the contributions presented at this conference and putting them into a broader context. Advanced methods for aerosol source apportionment are presented as well, followed by some aspects of health effects related to air pollution.

High molecular weight organic compounds (HMW-OCs) in severe winter haze: Direct observation and insights on the formation mechanism

High molecular weight organic compounds (HMW-OCs), formed as secondary organic aerosols (SOA), have been reported in many laboratory studies. However, little evidence of HMW-OCs formation, in particular during winter season in the real atmosphere, has been reported. In January 2013, Beijing faced historically severe haze pollution, in which the hourly PM_2.5 concentration reached as high as 974 μg m^-3. Four typical haze events (HE1 to HE4) were identified, and HE2 (Jan. 9-16) was the most serious of these. Based on the hourly observed chemical composition of PM_2.5 and the daily organic composition analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), we found that abundant ion peaks in m/z 200-850 appeared on heavy haze days, whereas these were negligible on a clear day, indicating the existence of HMW-OCs in the wintertime haze. A negative nonlinear correlation between HMW-OCs and O₃ suggested that gas oxidation was not likely to be the dominant mechanism for HMW-OCs formation. During the heavy haze events, the relative humidity and mass ratio of H₂O/PM_2.5 reached as high as 80% and 0.2, respectively. The high water content and its good positive correlation with HMW-OCs indicated that an aqueous-phase process may be a significant pathway in wintertime. The evidence that acidity was much higher during HE2 (0.37 μg m^-3) than on other days, as well as its strong correlation with HMW-OCs, indicated that acid-catalyzed reactions likely resulted in HMW-OCs formation during the heavy winter haze in Beijing.

Characterization of particulate products for aging of ethylbenzene secondary organic aerosol in the presence of ammonium sulfate seed aerosol

Aging of secondary organic aerosol (SOA) particles formed from OH- initiated oxidation of ethylbenzene in the presence of high mass (100-300μg/m(3)) concentrations of (NH4)2SO4 seed aerosol was investigated in a home-made smog chamber in this study. The chemical composition of aged ethylbenzene SOA particles was measured using an aerosol laser time-of-flight mass spectrometer (ALTOFMS) coupled with a Fuzzy C-Means (FCM) clustering algorithm. Experimental results showed that nitrophenol, ethyl-nitrophenol, 2,4-dinitrophenol, methyl glyoxylic acid, 5-ethyl-6-oxo-2,4-hexadienoic acid, 2-ethyl-2,4-hexadiendioic acid, 2,3-dihydroxy-5-ethyl-6-oxo-4-hexenoic acid, 1H-imidazole, hydrated N-glyoxal substituted 1H-imidazole, hydrated glyoxal dimer substituted imidazole, 1H-imidazole-2-carbaldehyde, N-glyoxal substituted hydrated 1H-imidazole-2-carbaldehyde and high-molecular-weight (HMW) components were the predominant products in the aged particles. Compared to the previous aromatic SOA aging studies, imidazole compounds, which can absorb solar radiation effectively, were newly detected in aged ethylbenzene SOA in the presence of high concentrations of (NH4)2SO4 seed aerosol. These findings provide new information for discussing aromatic SOA aging mechanisms.

Near-Real Time Measurement of Carbonaceous Aerosol Using Microplasma Spectroscopy: Application to Measurement of Carbon Nanomaterials

A sensitive, field-portable microplasma spectroscopy method has been developed for real-time measurement of carbon nanomaterials. The method involves microconcentration of aerosol on a microelectrode tip for subsequent analysis for atomic carbon using laser-induced breakdown spectroscopy (LIBS) or spark emission spectroscopy (SES). The spark-induced microplasma was characterized by measuring the excitation temperature (15,000 - 35,000 K), electron density (1.0 × 1017 - 2.2 × 1017 cm-3), and spectral responses as functions of time and interelectrode distance. The system was calibrated and detection limits were determined for total atomic carbon (TAC) using a carbon emission line at 247.856 nm (C I) for various carbonaceous materials including sucrose, EDTA, caffeine, sodium carbonate, carbon black, and carbon nanotubes. The limit of detection for total atomic carbon was 1.61 ng, equivalent to 238 ng m-3 when sampling at 1.5 L min-1 for 5 min. To improve the selectivity for carbon nanomaterials, which consist of elemental carbon (EC), the cathode was heated to 300 °C to reduce the contribution of organic carbon to the total atomic carbon. Measurements of carbon nanotube aerosol at elevated electrode temperature showed improved selectivity to elemental carbon and compared well with the measurements from thermal optical method (NIOSH Method 5040). The study shows that the SES method to be an excellent candidate for development as a low-cost, hand-portable, real-time instrument for measurement of carbonaceous aerosols and nanomaterials.

New insights into secondary organic aerosol from the ozonolysis of α-pinene from combined infrared spectroscopy and mass spectrometry measurements

Thermograms of desorbing species from size-fractionated SOA.

Aging of secondary organic aerosol from alpha-pinene ozonolysis: roles of hydroxyl and nitrate radicals

This work investigates the oxidative aging of preformed secondary organic aerosol (SOA) derived from alpha-pinene ozonolysis (-100 ppb(v) hydrocarbon [HC(x)] with excess of O3) within the University of California-Riverside Center for Environmental Research and Technology environmental chamber that occurs after introduction of additional hydroxyl (OH) and nitrate (NO3) radicals. Simultaneous measurements of SOA volume concentration, hygroscopicity, particle density, and elemental chemical composition (C:O:H) reveal increased particle wall-loss-corrected SOA formation (1.5%, 7.5%, and 15.1%), increase in oxygen-to-carbon ratio (O/C; 15.6%, 8.7%, and 8.7%), and hydrophilicity (4.2%, 7.4%, and 1.4%) after addition of NO (ultraviolet [UV] on), H2O2 (UV(on)), and N2O5 (dark), respectively. The processing observed as an increase in O/C and hydrophilicity is attributed to OH and NO3 reactions with first-generation vapor products and UV photolysis. The rate of increase in O/C appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) on a day time scale even at the raised chamber radical concentrations. The additional processing with UV irradiation without addition of NO, H2O2, or N2O5 is observed, adding 5.5% wall-loss-corrected volume. The photolysis-only processing is attributed to additional OH generated from photolysis of the nitrous acid (HONO) offgasing from chamber walls. This finding indicates that OH and NO3 radicals can further alter the chemical composition of SOA from alpha-pinene ozonolysis, which is proved to consist of first-generation products.

IMPLICATIONS

Secondary organic aerosol (SOA) may undergo aging processes once formed in the atmosphere, thereby altering the physicochemical and toxic properties of aerosol. This study discusses SOA aging of a major biogenic volatile organic compound (VOC; alpha-pinene) after it initially forms SOA. Aging of the alpha-pinene ozonolysis system by OH (through NO or H2O2 injection), NO3 (through N2O5 injection), and photolysis is observed. Although the reaction rate appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) level of oxygenation on a 1-day scale, it is important that SOA aging be considered in ambient air quality models. Aging in this study is attributed to further oxidation of gas-phase oxidation products of alpha-pinene ozonolysis.

Rapid formation of secondary organic aerosol from the photolysis of 1-nitronaphthalene: role of naphthoxy radical self-reaction

The chemical composition of secondary organic aerosol (SOA) formed from the photolysis of 1-nitronaphthalene in a series of simulation chamber experiments has been investigated using an aerosol time-of-flight mass spectrometer (ATOFMS). The resulting SOA is characterized by the presence of a dimer (286 Da) proposed to be formed through the self-reaction of naphthoxy radicals along with the expected product nitronaphthol. The molecular formulas of the SOA products were confirmed by collecting filter samples and analyzing the extracts using ultrahigh resolution mass spectrometry. Further evidence for the radical self-reaction mechanism was obtained by photolyzing 1-nitronaphthalene in the presence of excess nitrobenzene, where it was shown that the resulting SOA contained a product consistent with the cross-reaction of phenoxy and naphthoxy radicals. The naphthoxy dimer was formed from the photolysis of 1-nitronaphthalene under a variety of different experimental conditions including the presence of excess butyl ether as an OH scavenger and the presence of ambient air and particles. However, formation of the dimer was suppressed when 1-nitronaphthalene was photolyzed in the presence of excess NO and nitronaphthol was instead found to be the dominant particle-phase product indicating that the yield of the dimer is dependent upon the concentration of pre-existing NO(x). The results of this work suggest that photolysis of 1-nitronaphthalene represents a previously unidentified pathway to SOA formation in the troposphere. Analogous mechanisms may also be important for other nitrated polycyclic aromatic hydrocarbons.

Mass spectrometry of atmospheric aerosols--recent developments and applications. Part II: On-line mass spectrometry techniques

Many of the significant advances in our understanding of atmospheric particles can be attributed to the application of mass spectrometry. Mass spectrometry provides high sensitivity with fast response time to probe chemically complex particles. This review focuses on recent developments and applications in the field of mass spectrometry of atmospheric aerosols. In Part II of this two-part review, we concentrate on real-time mass spectrometry techniques, which provide high time resolution for insight into brief events and diurnal changes while eliminating the potential artifacts acquired during long-term filter sampling. In particular, real-time mass spectrometry has been shown recently to provide the ability to probe the chemical composition of ambient individual particles <30 nm in diameter to further our understanding of how particles are formed through nucleation in the atmosphere. Further, transportable real-time mass spectrometry techniques are now used frequently on ground-, ship-, and aircraft-based studies around the globe to further our understanding of the spatial distribution of atmospheric aerosols. In addition, coupling aerosol mass spectrometry techniques with other measurements in series has allowed the in situ determination of chemically resolved particle effective density, refractive index, volatility, and cloud activation properties.

Characterization of surgical aerosols by the compact single-particle mass spectrometer LAMPAS 3

A new method is presented using an optical particle counter and the compact mobile laser mass spectrometer LAMPAS 3 for in situ analysis of single particles generated by electrosurgical dissection of biological tissues. The instrumental performance is demonstrated for analysing aerosol particles formed during rapid thermal evaporation of porcine liver and porcine kidney tissues. Particle number concentrations of up to 5,000 particles per cubic centimetre were detected during surgical dissection. Chemical analysis of tissue particles was performed by bipolar time-of-flight mass spectrometry. The application of an online mass spectrometric particle analysis for surgical aerosols is reported here for the first time.

Molecular characterization of organic aerosols using nanospray-desorption/electrospray ionization-mass spectrometry

Nanospray desorption electrospray ionization (nano-DESI) combined with high-resolution mass spectrometry (HR-MS) is a promising approach for the detailed, molecular-level chemical characterization of atmospheric organic aerosols (OA) collected in laboratory and field experiments. The nano-DESI technique possesses distinct advantages of technical simplicity, enhanced sensitivity, and signal stability. In nano-DESI, analyte is desorbed into a solvent bridge formed between two capillaries and the analysis surface, which enables fast and efficient characterization of OA collected on substrates without sample preparation. Stable signals achieved using nano-DESI make it possible to obtain high-quality HR-MS data both for laboratory-generated and field-collected OA using only a small amount of material (<10 ng). Furthermore, nano-DESI enables the efficient detection of chemically labile compounds in OA, which is important for understanding chemical aging phenomena.

Evidence for high molecular weight nitrogen-containing organic salts in urban aerosols

High molecular weight (M(w)) species were observed at substantial intensities in the positive-ion mass spectra in urban Shanghai aerosols collected from a single-particle time-of-flight mass spectrometer (in the m/z range 250-500) during three separate periods over 2007-2009. These species correlate well with the CN(-) mass signal, suggesting that C-N bonds are prevalent and that the observed high-M(w) species are potentially nitrogen-containing organic salts. Anti-correlation with the ambient O(3) concentration suggests that photochemical oxidants are not involved directly in the formation of these species. The Mannich reaction, among amines (or ammonia), formaldehyde, and carbonyls with an adjacent, acidic proton, is proposed as a plausible pathway leading to these organic salts. Although the high-M(w) species observed in the single-particle mass spectra appear to be nitrogen-containing organics, further chemical confirmation is desired to verify if the proposed Mannich reaction can explain the formation of these high-M(w) species in regions where ammonia, amines, and carbonyls are prevalent.

Recent developments in the mass spectrometry of atmospheric aerosols

Atmospheric aerosol particles consist of a highly complex mixture of thousands of different compounds. Mass spectrometric techniques are well suited for the analysis of these particles, with each method of analysis having specific advantages and disadvantages. On-line techniques offer high time resolution and thus allow for the investigation of rapidly changing signals. They typically measure either single particles or the average non-refractory submicrometer aerosol. Off-line techniques are often coupled to chromatography or another technique separating for a specific property, which enhances their resolving power. Ultra-high resolution mass spectrometry allows for an unambiguous assignment of the elemental composition throughout the majority of the mass range typically measured in ambient aerosol samples, i.e. up to about m/z 400-600. The quantitative determination of individual compounds, or of classes of compounds, remains an important, but often unresolved, topic. Examples of applications of various mass spectrometric techniques are presented, both from laboratory and field studies.

Particulate nitrate formation in a highly polluted urban area: a case study by single-particle mass spectrometry in Shanghai

An aerosol time-of-flight mass spectrometer was deployed in August 2007 to characterize the 0.1-2.0 microm diameter particles in Shanghai to examine nitrate-containing particles. About 39% of the mass spectra of single particles contained nitrate ion peaks. The relative intensity of nitrate signals showed a pronounced diurnal profile, peaking in the late night or early morning during highly polluted days, and is closely correlated with the ambient relative humidity (RH). However, during the sampling days with good air quality, the diurnal pattern of nitrate changed by showing much lower signal intensity of nitrate with irregular variation. Poor correlation between the signals of ammonium and nitrate inthe mass spectra excluded the possibility of NH4NO3 as a major form of particulate nitrate, whose formation is favored by high RH and low temperature. The peak intensities of nitrate during the nighttime and high concentrations of O3 and NO2 strongly suggest that the heterogeneous reactions of N2O5 and NO3 onthe aerosol surface dominated the particulate nitrate formation on polluted days.

Analysis of atmospheric aerosols

Aerosols represent an important component of the Earth's atmosphere. Because aerosols are composed of solid and liquid particles of varying chemical complexity, size, and phase, large challenges exist in understanding how they impact climate, health, and the chemistry of the atmosphere. Only through the integration of field, laboratory, and modeling analysis can we begin to unravel the roles atmospheric aerosols play in these global processes. In this article, we provide a brief review of the current state of the science in the analysis of atmospheric aerosols and some important challenges that need to be overcome before they can become fully integrated. It is clear that only when these areas are effectively bridged can we fully understand the impact that atmospheric aerosols have on our environment and the Earth's system at the level of scientific certainty necessary to design and implement sound environmental policies.

Characterization of polar compounds and oligomers in secondary organic aerosol using liquid chromatography coupled to mass spectrometry

A generic method has been developed for the analysis of polar compounds and oligomers in secondary organic aerosol (SOA) formed during atmospheric simulation chamber experiments. The technique has been successfully applied to SOA formed in a variety of systems, ranging from ozonolysis of biogenic volatile organic compounds to aromatic photooxidation. An example application of the method is described for the SOA produced from the reaction of ozone with cis-3-hexenyl acetate, an important biogenic precursor. A range of solvents were tested as extraction media, and water was found to yield the highest recovery. Extracts were analyzed using reversed-phase liquid chromatography coupled to ion trap mass spectrometry. In order to determine correct molecular weight assignments and increase sensitivity for less polar species, a series of low-concentration mobile-phase additives were used (NaCl, LiBr, NH4OH). Lithium bromide produced better fragmentation patterns, with more structural information than in the other cases with no reduction in sensitivity. The main reaction products identified in the particle-phase were 3-acetoxypropanal, 3-acetoxypropanoic acid, and 3-acetoxypropane peroxoic acid and a series of dimers and trimers up to 500 Da. Structural identification of oligomers indicates the presence of linear polyesters possibly formed via esterfication reactions or decomposition of peroxyhemiacetals.

Real-time, single-particle measurements of oligomers in aged ambient aerosol particles

Unique high mass negative ions in the -200 to -400 mass/charge range with repetitive spacings of 12, 14, and 16 units, representative of oligomeric species, have been detected in single ambient submicrometer aerosol particles using real-time single-particle mass spectrometry during the Study of Organic Aerosols field campaign conducted in Riverside, CA (SOAR) in August and November 2005. These oligomer-containing particles represented 33-40% of the total detected particles and contained other indicators of aging including oxidized organic carbon, amine, nitrate, and sulfate ion markers. Overall, the highest mass oligomeric patterns were observed in small acidic 140-200 nm particles in the summer. Also during the summer, increased oligomer intensities were observed when the particles were heated with a thermodenuder. We hypothesize that heat removed semivolatile species, thereby increasing particle acidity, while concentrating the oligomeric precursors and accelerating oligomer formation. Differences in oligomer behavior with respect to particle size and heating can be attributed to seasonal differences in photochemical oxidation, the relative amount of ammonium, and particle acidity.

Instrumentation, data evaluation and quantification in on-line aerosol mass spectrometry

On-line micro- and nanoparticle mass spectrometry has evolved into a prominent analytical method for the characterization of airborne particles, particle populations and aerosols over the recent years, driven by essential developments in instrumentation, data evaluation and validation. In this tutorial, the fundamental aspects of the technology and methodology for qualitative and quantitative on-line aerosol particle analysis are discussed. Specific properties of the on-line mass spectrometric instrumentation for particle analysis are described, combined with a discussion of basic differences of the instruments and demands for future improvements of instruments and data analysis techniques. Optimized technology and methodology in particle analysis is expected to lead to essential growth of the knowledge and to quality improvement of the description of atmospheric processes and health effects in the future.

Ultrahigh Mass Resolution and Accurate Mass Measurements as a Tool To Characterize Oligomers in Secondary Organic Aerosols

Organic aerosols are a major fraction, often more than 50%, of the total atmospheric aerosol mass. The chemical composition of the total organic aerosol mass is poorly understood, although hundreds of compounds have been identified in the literature. High molecular weight compounds have recently gained much attention because this class of compounds potentially represents a major fraction of the unexplained organic aerosol mass. Here we analyze secondary organic aerosols, generated in a smog chamber from alpha-pinene ozonolysis with ultra-high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). About 450 compounds are detected in the mass range of m/z 200-700. The mass spectrum is clearly divided into a low molecular weight range (monomer) and a high molecular weight range, where dimers and trimers are distinguishable. Using the Kendrick mass analysis, the elemental composition of about 60% of all peaks could be determined throughout the whole mass range. Most compounds have high O:C ratios between 0.4 and 0.6. Small compounds (i.e., monomers) have a higher maximum O:C ratio than dimers and trimers, suggesting that condensation reactions with, for example, the loss of water are important in the oligomer formation process. A program developed in-house was used to determine exact mass differences between peaks in the monomer, dimer, and trimer mass range to identify potential monomer building blocks, which form the co-oligomers observed in the mass spectrum. A majority of the peaks measured in the low mass region of the spectrum (m/z < 300) is also found in the calculated results. For the first time the elemental composition of the majority of peaks over a wide mass range was determined using advanced data analysis methods for the analysis of ultra-high-resolution MS data. Possible oligomer formation mechanisms in secondary organic aerosols were investigated.

Current literature in mass spectrometry

In order to keep subscribers up‐to‐date with the latest developments in their field, John Wiley & Sons are providing a current awareness service in each issue of the journal. The bibliography contains newly published material in the field of mass spectrometry. Each bibliography is divided into 11 sections: 1 Books, Reviews & Symposia; 2 Instrumental Techniques & Methods; 3 Gas Phase Ion Chemistry; 4 Biology/Biochemistry: Amino Acids, Peptides & Proteins; Carbohydrates; Lipids; Nucleic Acids; 5 Pharmacology/Toxicology; 6 Natural Products; 7 Analysis of Organic Compounds; 8 Analysis of Inorganics/Organometallics; 9 Surface Analysis; 10 Environmental Analysis; 11 Elemental Analysis. Within each section, articles are listed in alphabetical order with respect to author (6 Weeks journals ‐ Search completed at 4th. Oct. 2006)