Electrochemical detection of single-nucleotide mismatches using an electrode microarray

Disposable impedance sensors based on novel hybrid MoS2 nanosheets and microparticles to detect Escherichia Coli DNA

The rapid and accurate detection of pathogenic bacteria is essential for food safety and public health. Conventional detection techniques, such as nucleic acid sequence-based amplification and polymerase chain reaction, are time-consuming and require specialized equipment and trained personnel. Here, we present quick, disposable impedance sensors based on the novel hybrid MoS2 nanomaterial for detecting Escherichia coli DNA. Our results indicate that the proposed sensors operate linearly between 10- 20 and 10-15 M concentrations, achieving an impressive detection limit of 10-20 M with the highest sensitivity observed at a 0.325 nM probe concentration sensor. Furthermore, the electrochemical impedance spectroscopy biosensors exhibited potential selectivity for Escherichia coli DNA over Bacillus subtilis and Vibrio proteolyticus DNA sequences. The findings offer a promising avenue for efficient and precise DNA detection, with potential implications for broader biotechnology and medical diagnostics applications.

Developing a Low-Cost, Simple-to-Use Electrochemical Sensor for the Detection of Circulating Tumour DNA in Human Fluids

It is well-known that two major issues, preventing improved outcomes from cancer are late diagnosis and the evolution of drug resistance during chemotherapy, therefore technologies that address these issues can have a transformative effect on healthcare workflows. In this work we present a simple, low-cost DNA biosensor that was developed specifically to detect mutations in a key oncogene (KRAS). The sensor employed was a screen-printed array of carbon electrodes, used to perform parallel measurements of DNA hybridisation. A DNA amplification reaction was developed with primers for mutant and wild type KRAS sequences which amplified target sequences from representative clinical samples to detectable levels in as few as twenty cycles. High levels of sensitivity were demonstrated alongside a clear exemplar of assay specificity by showing the mutant KRAS sequence was detectable against a significant background of wild type DNA following amplification and hybridisation on the sensor surface. The time to result was found to be 3.5 h with considerable potential for optimisation through assay integration. This quick and versatile biosensor has the potential to be deployed in a low-cost, point-of-care test where patients can be screened either for early diagnosis purposes or monitoring of response to therapy.

Impedimetric Sensing of Factor V Leiden Mutation by Zip Nucleic Acid Probe and Electrochemical Array

A carbon nanofiber enriched 8-channel screen-printed electrochemical array was used for the impedimetric detection of SNP related to Factor V Leiden (FV Leiden) mutation, which is the most common inherited form of thrombophilia. FV Leiden mutation sensing was carried out in three steps: solution-phase nucleic acid hybridization between zip nucleic acid probe (Z-probe) and mutant type DNA target, followed by the immobilization of the hybrid on the working electrode area of array, and measurement by electrochemical impedance spectroscopy (EIS). The selectivity of the assay was tested against mutation-free DNA sequences and synthetic polymerase chain reaction (PCR) samples. The developed biosensor was a trustful assay for FV Leiden mutation diagnosis, which can effectively discriminate wild type and mutant type even in PCR samples.

Role of backbones on the interaction of metal ions with deoxyribonucleic acid and peptide nucleic acid: A DFT study

Metal ion interaction with deoxyribonucleic acid and peptide nucleic acid were studied using B3LYP-D3/6-311++g(d,p)//B3LYP/6-31 + G(d) level of theory in aqueous phase employing polarized continuum (PCM) model. This study reports the role of backbones on deoxyribonucleic acid and peptide nucleic acid for complexation with different metal ions. The systematic study performed with DFT calculations reveals that central binding (Type-4) shows the strongest binding compared to the other binding modes because of the involvement of the backbone as well as the nitrogenous bases. The charged backbone of DNA nucleotides contributes significantly towards binding with the metal ions. The deoxyguanosine monophosphate (dGMP) clearly indicates the strongest binding upon complexation with Mg²⁺ (-49.6 kcal/mol), Zn²⁺ (-45.3 kcal/mol) and Cu²⁺ (-148.4 kcal/mol), respectively. The neutral backbone of PNA also assists to complex the metal ions with PNA nucleotides. The Mg²⁺ and Cu²⁺ prefer to bind with the PNA-Cytosine (-32.9 kcal/mol & -132.9 kcal/mol) in central binding mode (type-4). PNA-Adenine-Zn²⁺ (-29.1 kcal/mol) is the preferred binding mode (type-4) compared to other modes of interaction for this metal ion with PNA-Adenine nucleotide. The Cu²⁺ ion showed the superior complexation ability with deoxyribonucleic acid and peptide nucleic acid compared to Mg²⁺ and Zn²⁺ ions. The cation-π complexation with the bases of nucleotides was also obtained with Cu²⁺ ion. The AIM (atoms in molecule) theory has been applied to examine the nature of the interaction of Mg²⁺, Zn²⁺, and Cu²⁺ ion to the deoxyribonucleic acid and peptide nucleic acid. The alkaline earth metal, Mg²⁺ ion shows electrostatic nature while interaction with deoxyribonucleic acid and peptide nucleic acid, however, the transition metal ions (Zn²⁺, Cu²⁺) showed partly covalent nature as well with deoxyribonucleic acid and peptide nucleic acid. The optical properties calculated for the binding of metal ions with deoxyribonucleic acid and peptide nucleic acid showed a diagnostic signature to ascertain the interaction of metal ions with such nucleotides. Cu²⁺ ion showed larger red shifts in the absorption spectrum values upon complexation with the DNAs and PNAs. The calculated results suggest that such metal ions would prefer to bind with the DNA compared to PNA in DNA-PNA duplexes. The preference for the binding of metal ions with DNA nucleotides is largely attributed to the contribution of charged backbones compared to the neutral PNA backbones.

Selective covalent capture of a DNA sequence corresponding to a cancer-driving C>G mutation in theKRASgene by a chemically reactive probe: optimizing a cross-linking reaction with non-canonical duplex structures

A covalent cross-linking reaction used for selective capture of a disease-relevant DNA sequence.

Nanoporous platinum electrode grown on anodic aluminum oxide membrane: Fabrication, characterization, electrocatalytic activity toward reactive oxygen and nitrogen species

A new type of nanoelectrode, nanoporous platinum (NPt) electrode was prepared on aluminum oxide membrane by thermal evaporation deposition. The morphology, conductivity and electrocatalytic activity of NPt electrode were characterized and compared with those of nanofilm-Pt electrode through scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques, respectively. SEM images showed that "nanocavities" observed in NPt electrode were actually 2-dimensional enclosures by linked nanoparticles. It was different from the conventional arrays of "nanocavities" formed on homogeneous metal films. EIS data indicated that NPt electrode possesses higher conductivity. Compared with that on nanofilm-Pt electrode (14.05 Ω·cm²), the impedance spectrum on NPt electrode exhibits a semicircle portion with much smaller diameters (1.24 Ω·cm² for NPt-100, 1.48 Ω·cm² for NPt-200). Meanwhile, the response sensitivity of NPt electrode to O₂ is 0.85 mA cm^-2, which is larger than that of nanofilm-Pt electrode (0.54 mA cm^-2). The largest catalytic current for nitric oxide (NO) was obtained in buffer with pH value of 9.4 while for Angeli^'s salt (AS) was obtained in buffer with pH value of 5.4. Additionally, electrocatalytic mechanisms of NPt electrode toward NO and AS were proposed, which indicating it depended on pH value of buffer solution.

Impedimetric measurement of DNA-DNA hybridisation using microelectrodes with different radii for detection of methicillin resistant Staphylococcus aureus (MRSA)

Due to their electroanalytical advantages, microelectrodes are a very attractive technology for sensing and monitoring applications. One highly important application is measurement of DNA hybridisation to detect a wide range of clinically important phenomena, including single nucleotide polymorphisms (SNPs), mutations and drug resistance genes. The use of electrochemical impedance spectroscopy (EIS) for measurement of DNA hybridisation is well established for large electrodes but as yet remains relatively unexplored for microelectrodes due to difficulties associated with electrode functionalisation and impedimetric response interpretation. To shed light on this, microelectrodes were initially fabricated using photolithography and characterised electrochemically to ensure their responses matched established theory. Electrodes with different radii (50, 25, 15 and 5 μm) were then functionalised with a mixed film of 6-mercapto-1-hexanol and a thiolated single stranded DNA capture probe for a specific gene from the antibiotic resistant bacterium MRSA. The complementary oligonucleotide target from the mecA MRSA gene was hybridised with the surface tethered ssDNA probe. The EIS response was evaluated as a function of electrode radius and it was found that charge-transfer (R_CT) was more significantly affected by hybridisation of the mecA gene than the non-linear resistance (R_NL) which is associated with the steady state current. The discrimination of mecA hybridisation improved as electrode radius reduced with the R_CT component of the response becoming increasingly dominant for smaller radii. It was possible to utilise these findings to produce a real time measurement of oligonucleotide binding where changes in R_CT were evident one minute after nanomolar target addition. These data provide a systematic account of the effect of microelectrode radius on the measurement of hybridisation, providing insight into critical aspects of sensor design and implementation for the measurement of clinically important DNA sequences. The findings open up the possibility of developing rapid, sensitive DNA based measurements using microelectrodes.

Sequence-Specific Covalent Capture Coupled with High-Contrast Nanopore Detection of a Disease-Derived Nucleic Acid Sequence

Hybridization-based methods for the detection of nucleic acid sequences are important in research and medicine. Short probes provide sequence specificity, but do not always provide a durable signal. Sequence-specific covalent crosslink formation can anchor probes to target DNA and might also provide an additional layer of target selectivity. Here, we developed a new crosslinking reaction for the covalent capture of specific nucleic acid sequences. This process involved reaction of an abasic (Ap) site in a probe strand with an adenine residue in the target strand and was used for the detection of a disease-relevant T→A mutation at position 1799 of the human BRAF kinase gene sequence. Ap-containing probes were easily prepared and displayed excellent specificity for the mutant sequence under isothermal assay conditions. It was further shown that nanopore technology provides a high contrast-in essence, digital-signal that enables sensitive, single-molecule sensing of the cross-linked duplexes.

Assessment of analytical methods to determine pyrethroids content of bednets

OBJECTIVE

To present and evaluate simple, cost-effective tests to determine the amount of insecticide on treated materials.

METHODS

We developed and evaluated a competitive immunoassay on two different platforms: a label-free impedimetric biosensor (EIS biosensor) and a lateral flow. Both approaches were validated by gas chromatography (GC) and ELISA, gold standards for analytical methods and immunoassays, respectively. Finally, commercially available pyrethroid-treated ITN samples were analysed. Different extraction methods were evaluated.

RESULTS

Insecticide extraction by direct infusion of the ITN samples with dichloromethane and dioxane showed recovery efficiencies around 100% for insecticide-coated bednets, and >70% for insecticide-incorporated bednets. These results were comparable to those obtained with standard sonication methods. The competitive immunoassay characterisation with ELISA presented a dynamic range between 12 nm and 1.5 μm (coefficient of variation (CV) below 5%), with an IC₅₀ at 138 nm, and a limit of detection (LOD) of 3.2 nm. EIS biosensor had a linear range between 1.7 nm and 61 nm (CV around 14%), with an IC₅₀ at 10.4 nm, and a LOD of 0.6 nm. Finally, the lateral flow approach showed a dynamic range between 150 nm and 1.5 μm, an IC₅₀ at 505 nm and a LOD of 67 nm.

CONCLUSIONS

ELISA can replace chromatography as an accurate laboratory technique to determine insecticide concentration in bednets. The lateral flow approach developed can be used to estimate ITN insecticide concentration in the field. This new technology, coupled to the new extraction methods, should provide reliable guidelines for ITN use and replacement in the field.

Molecular conductance of double-stranded DNA evaluated by electrochemical capacitance spectroscopy

Conductance was measured in two different double stranded DNA (both with 20 bases), the more conducting poly(dG)-poly(dC) (ds-DNAc) and the less conducting poly(dA)-poly(dT) (ds-DNAi), by means of Electrochemical Capacitance Spectroscopy (ECS). The use of the ECS approach, exemplified herein with DNA nanowires, is equally a suitable and time-dependent advantageous alternative for conductance measurement of molecular systems, additionally allowing better understanding of the alignment existing between molecular scale conductance and electron transfer rate.

A robust DNA interface on a silicon electrode

Schematic of a DNA sensing interface formed on oxide-free silicon electrodes that both resist nonspecific adsorption of DNA and maintains stable electrical properties in biological media.

Direct quantification of microRNA at low picomolar level in sera of glioma patients using a competitive hybridization followed by amplified voltammetric detection

MicroRNAs (miRNAs), acting as oncogenes or tumor suppressors in humans, play a key role in regulating gene expression and are believed to be important for developing novel therapeutic treatments and clinical prognoses. Due to their short lengths (17-25 nucleotides) and extremely low concentrations (typically < picomolar) in biological samples, quantification of miRNAs has been challenging to conventional biochemical methods, such as Northern blotting, microarray, and quantitative polymerase chain reaction (qPCR). In this work, a biotinylated miRNA (biotin-miRNA) whose sequence is the same as that of a miRNA target is introduced into samples of interest and allowed to compete with the miRNA target for the oligonucleotide (ODN) probe preimmobilized onto an electrode. Voltammetric quantification of the miRNA target was accomplished after complexation of the biotin-miRNA with ferrocene (Fc)-capped gold nanoparticle/streptavidin conjugates. The Fc oxidation current was found to be inversely proportional to the concentration of target miRNA between 10 fM and 2.0 pM. The method is highly reproducible (relative standard deviation (RSD) < 5%), regenerable (at least 8 regeneration/assay cycles without discernible signal decrease), and selective (with sequence specificity down to a single nucleotide mismatch). The low detection levels (10 fM or 0.1 attomoles of miRNA in a 10 μL solution) allow the direct quantification of miRNA-182, a marker correlated to the progression of glioma in patients, to be performed in serum samples without sample pretreatment and RNA extraction and enrichment. The concentration of miRNA-182 in glioma patients was found to be 3.1 times as high as that in healthy persons, a conclusion in excellent agreement with a separate qPCR measurement of the expression level. The obviations of the requirement of an internal reference in qPCR, simplicity, and cost-effectiveness are other additional advantages of this method for detection of nucleic acids in clinical samples.

Nanoporous gold electrode as a platform for the construction of an electrochemical DNA hybridization biosensor

The application of a nanoporous gold electrode (NPGE) in the fabrication of an electrochemical sensing system for the detection of single base mismatches (SBMs) using ferrocene-modified DNA probe has been investigated in the present manuscript. Ferrocene carboxylic acid is covalently attached to the amino-modified probe using EDC/NHS chemistry. By covalent attachment of the redox reporter molecules on the top of DNA, the direct oxidation of the ferrocene on the electrode surface is avoided. On the other hand, the electrochemical signals are amplified by anodizing the electrode surface and converting it to nanoporous form. By improving the sensitivity of the biosensor, the different SBMs including the thermodynamically stable G-A and G-T mismatches, can be easily distinguished. In this research, NPGE was prepared by anodization and chemical reduction of Au surface and used for signal amplification. Nanoporous electrode enhances the sensitivity of DNA biosensor and makes it capable to detect complementary target DNA in sub-nanomole scales.

Electrochemical identification of artificial oligonucleotides related to bovine species. Potential for identification of species based on mismatches in the mitochondrial cytochrome C1 oxidase gene

Our studies show that electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) of films of ds-DNA on gold allow us to distinguish between mitochondrial DNA fragments of the cytochrome c(1) oxidase (mt-Cox1) of three related species of the subfamily 'Bovinae' (Bos taurus, Bison bison, and Bison bonasus). In EIS, a perfectly matched DNA gives rise to a considerably larger charge transfer resistance R(ct) compared to mismatched pairings. Differences in charge transfer resistance, ΔR(ct), before and after the addition of Zn(2+) ions provide an additional tool for identification. In addition, all ds-DNA films were studied by SECM and their kinetic parameters were determined. Perfectly matched ds-DNAs are readily distinguished from mismatched duplexes by their lower rate constants. Our system can be used multiple times by dehybridization and rehybridization of capture strands up to the 250 pmole level.

The effects of oligonucleotide overhangs on the surface hybridization in DNA films: an impedance study

While oligonucleotide hybridization and effects of nucleobase mismatches have been the intense focus of a number of electrochemical studies, the effects of the target strand length on the electrochemical response of oligonucleotide films have not been addressed yet. In this report, we have studied the electrochemical impedance of the oligonucleotide films having overhangs on either the target or the surface bound capture strand. Each system gives different impedance responses, which were interpreted with the help of modified Randles' equivalent. Results indicate that comparable sizes of target and capture strands ensure the higher hybridization efficiency and film order. The presence of nucleobase overhangs at the bottom of the film causes lower changes in charge transfer resistance (ΔR(CT)) after hybridization due to lower hybridization efficiency and presumably non-uniformity in the film. Nucleobase overhangs at the top of the film result in higher ΔR(CT) due to higher film order and accumulation of negative charges but appear not to cause any steric congestion.

Probing nucleobase mismatch variations by electrochemical techniques: exploring the effects of position and nature of the single-nucleotide mismatch

Electrochemical impedance spectroscopy (EIS) has been used as an ultrasensitive tool for label-free detection of single-nucleotide mismatches in double-stranded DNA (ds-DNA) films. In this study, we have explored the effects of the position and of the type of single-nucleotide mismatch in ds-DNA on gold surfaces and were able to distinguish mismatch positions and mismatch pairs. The single-nucleotide mismatches A-C, A-A and A-G were introduced at three positions within the sequence in bottom, middle and top positions of ds-DNA, the films were studied by EIS, and the impedance results were interpreted with the help of equivalent circuits. The DeltaR(ct), the difference in charge transfer resistance before and after the addition of Zn(2+), was used to distinguish single-nucleotide mismatch within the DNA sequences. Importantly, the mismatch pair is easily distinguishable at the middle position. A purine-pyrimidine mismatch can be distinguished from purine-purine mismatch by its lower DeltaR(ct) value. In addition, all ds-DNA films were studied by scanning electrochemical microscopy in the absence and presence of Zn(2+), allowing us to distinguish a range of mismatched films from matched ds-DNA film.

Multiplexed DNA-modified electrodes

We report the use of silicon chips with 16 DNA-modified electrodes (DME chips) utilizing DNA-mediated charge transport for multiplexed detection of DNA and DNA-binding protein targets. Four DNA sequences were simultaneously distinguished on a single DME chip with 4-fold redundancy, including one incorporating a single base mismatch. These chips also enabled investigation of the sequence-specific activity of the restriction enzyme Alu1. DME chips supported dense DNA monolayer formation with high reproducibility, as confirmed by statistical comparison to commercially available rod electrodes. The working electrode areas on the chips were reduced to 10 microm in diameter, revealing microelectrode behavior that is beneficial for high sensitivity and rapid kinetic analysis. These results illustrate how DME chips facilitate sensitive and selective detection of DNA and DNA-binding protein targets in a robust and internally standardized multiplexed format.

Exploiting the interaction of metal ions and peptide nucleic acids-DNA duplexes for the detection of a single nucleotide mismatch by electrochemical impedance spectroscopy

The interaction of the metal ions Mg(2+), Zn(2+), Ni(2+), and Co(2+) with DNA-peptide nucleic acid (PNA) films on a gold surface is studied by electrochemical impedance spectroscopy in the presence of [Fe(CN)(6)](3-/4-) as the redox probe. Impedance data were analyzed with the help of a modified Randles' equivalent circuit. Changes in the charge-transfer resistance, R(CT), decreases in the order of Ni(2+) > Co(2+) > Zn(2+) > Mg(2+). We interpret these results in terms of stronger interactions for Ni(2+) with the DNA-PNA film compared to the other metal ions, potentially involving interactions with the nucleobases, presumably with the N7 of purines or the N3 of pyrimidines. On the basis of these observations, Ni(2+) was chosen to probe the detection of a C-T mismatch in 15-mer PNA-DNA films. Using Ni(2+), it is possible to detect a single C-T mismatch. The resulting DeltaR(CT) is larger for the PNA-DNA hybrid compared to that for the identical 15-mer DNA-DNA hybrid.

G-quadruplex signaling probe for highly sensitive DNA detection

Ferrocene-conjugated oligonucleotides that can form intermolecular guanine (G)-quadruplexes are prepared and used as signaling probes for detecting target DNA, improving substantially assay characteristics (e.g. a considerably wider linear dynamic range and lower detection limit).

Unlabeled hairpin DNA probe for electrochemical detection of single-nucleotide mismatches based on MutS-DNA interactions

The paper described a label-free assay for the detection of single-nucleotide mismatches in which an unlabeled hairpin DNA probe and a MutS protein conjugate (His6-MutS-linker peptide-streptavidin binding peptide (HMLS)) are exploited for the detection of mismatches by electrochemical impedance spectroscopy (EIS). We demonstrate this method for eight single-nucleotide mismatches. Upon hybridization of the target strand with the hairpin DNA probe, the stem-loop structure is opened forming a duplex DNA. In duplexes containing a single nucleotide mismatch, the mismatch is present at the solvent exposed side, enabling more effective HMLS recognition and binding. The binding event is evaluated by EIS and analyzed with the help of Randles' equivalent circuits. The differences in the charge transfer resistance DeltaR(CT) before and after protein binding to the duplex DNA allows the unequivocal detection of all eight single-nucleotide mismatches. DeltaR(CT) allows the discrimination of a C-A mismatch with the concentration of the target strand as low as 100 pM.

Electrochemical impedance spectroscopy

This review describes recent advances in electrochemical impedance spectroscopy (EIS) with an emphasis on its novel applications to various electrochemistry-related problems. Section 1 discusses the development of new EIS techniques to reduce measurement time. For this purpose, various forms of multisine EIS techniques were first developed via a noise signal synthesized by mixing ac waves of various frequencies, followed by fast Fourier transform of the signal and the resulting current. Subsequently, an entirely new concept was introduced in which true white noise was used as an excitation source, followed by Fourier transform of both excitation and response signals. Section 2 describes novel applications of the newly developed techniques to time-resolved impedance measurements as well as to impedance imaging. Section 3 is devoted to recent applications of EIS techniques, specifically traditional measurements in various fields with a special emphasis on biosensor detections.

DNA hybridization sensors based on electrochemical impedance spectroscopy as a detection tool

Recent advances in label free DNA hybridization sensors employing electrochemical impedance spectroscopy (EIS) as a detection tool are reviewed. These sensors are based on the modulation of the blocking ability of an electrode modified with a probe DNA by an analyte, i.e., target DNA. The probe DNA is immobilized on a self-assembled monolayer, a conducting polymer film, or a layer of nanostructures on the electrode such that desired probe DNA would selectively hybridize with target DNA. The rate of charge transfer from the electrode thus modified to a redox indicator, e.g., [Fe(CN)₆]^3−/4−, which is measured by EIS in the form of charge transfer resistance (R_ct), is modulated by whether or not, as well as how much, the intended target DNA is selectively hybridized. Efforts made to enhance the selectivity as well as the sensitivity of DNA sensors and to reduce the EIS measurement time are briefly described along with brief future perspectives in developing DNA sensors.

"Four-potential" ferrocene labeling of PNA oligomers via click chemistry

The scope of the Cu(I)-catalyzed [2 + 3] azide/alkyne cycloaddition (CuAAC, click chemistry) as a key reaction for the conjugation of ferrocene derivatives to N-terminal functionalized PNA oligomers is explored herein (PNA: peptide nucleic acid). The facile solid-phase synthesis of N-terminal azide or alkyne-functionalized PNA oligomer precursors and their cycloaddition with azidoferrocene, ethynylferrocene, and N-(3-ethylpent-1-yn-3-yl)ferrocene-carboxamide (DEPA-ferrocene) on the solid phase are presented. While the click reaction with azidomethylferrocene worked equally well, the ferrocenylmethyl group is lost from the conjugate upon acid cleavage. However, the desired product was obtained via a post-SPPS conversion of the alkyne-PNA oligomer with azidomethylferrocene in solution. The synthesis of all ferrocene-PNA conjugates (trimer t(3)-PNA, 3, 4, 5, 6; 12mer PNA, 10 - t c t a c a a g a c t c, 11 - t c t a c c g t a c t c) succeeded with excellent yields and purities, as determined by mass spectrometry and HPLC. Electrochemical studies of the trimer Fc-PNA conjugates 3, 4, 5, and 6 with four different ferrocene moieties revealed quasi-reversible redox processes of the ferrocenyl redox couple Fc(0/+) and electrochemical half-wave potentials in a range of E(1/2) = -20 mV to +270 mV vs FcH(0/+) (Fc: ferrocenyl, C(10)H(9)Fe). The observed potential differences ΔE(1/2)(min) are always greater than 60 mV for any given pair of Fc-PNA conjugates, thus allowing a reliable differentiation with sensitive electrochemical methods like e.g. square wave voltammetry (SWV). This is the electrochemical equivalent of "four-color" detection and is hence denoted "four-potential" labeling. Preparation and electrochemical investigation of the set of four structurally different and electrochemically distinguishable ferrocenyl groups conjugated to PNA oligomers, as exemplified by the conjugates 3, 4, 5, and 6, demonstrates the scope of the azide/alkyne cycloaddition for the labeling of PNA with electrochemically active ferrocenyl groups. Furthermore, it provides a PNA-based system for the electrochemical detection of single-nucleotide polymorphism (SNP) in DNA/RNA.

Label-free technologies for quantitative multiparameter biological analysis

In the postgenomic era, information is king and information-rich technologies are critically important drivers in both fundamental biology and medicine. It is now known that single-parameter measurements provide only limited detail and that quantitation of multiple biomolecular signatures can more fully illuminate complex biological function. Label-free technologies have recently attracted significant interest for sensitive and quantitative multiparameter analysis of biological systems. There are several different classes of label-free sensors that are currently being developed both in academia and in industry. In this critical review, we highlight, compare, and contrast some of the more promising approaches. We describe the fundamental principles of these different methods and discuss advantages and disadvantages that might potentially help one in selecting the appropriate technology for a given bioanalytical application.

Pathways of excess electron transfer in phenothiazine-tethered DNA containing single-base mismatches

The effects of local structural disorder on excess electron transfer (EET) in DNA were investigated by evaluating photoinduced electron transfer in phenothiazine (PTZ)-modified oligodeoxynucleotides bearing single-base mismatches. Unexpectedly, more efficient electron transfer was observed for the mismatched duplexes than for the complementary DNA, suggesting that distraction of hydrogen bond interaction at the mismatch site enables electron injection or hopping beyond the mismatch sites. It was also anticipated that water accessibility of the mismatched nucleobases could affect EET because protonation of the electron-captured pyrimidine intermediates became competitive to EET, especially at the mismatch sites.

DNA hairpins containing a diaminostilbene derivative as a photoinduced electron donor for probing the effects of single-base mismatches on excess electron transfer in DNA

To investigate the effects of local structural disorder induced by a single-base mismatch on excess electron transfer (EET) in DNA, a novel hairpin DNA containing diaminostilbene (DAS) as a photoinducible electron donor has been developed. It was clearly demonstrated that EET efficiency depends on the electron injection modes from the electron donors and redox properties of the mismatched bases.

Interaction of metal ions and DNA films on gold surfaces: an electrochemical impedance study

Electrochemical impedance spectroscopy (EIS) has been used to investigate the effects of a number of metal ions with DNA films on gold surfaces exploiting [Fe(CN)6](3-/4-) as a solution-based redox probe. Alkaline earth metal ions Mg2+, Ca2+, trivalent Al3+, La3+ and divalent transition metal ions Ni2+, Cu2+, Cd2+ and Hg2+ have been selected in this study and the results are compared with previous studies on the effects of Zn2+ on the EIS of DNA films. All experimental results were evaluated with the help of equivalent circuits which allowed the extraction of resistive and capacitive components. For all metal ions studied here, addition of the metal ions causes a decrease in the charge transfer resistance. The difference of charge transfer resistance (DeltaR(ct)) of ds-DNA films in the presence and absence of the various metal ions is different and particular to any given metal ion. In addition, we studied the EIS of ds-DNA films containing a single A-C mismatch in the presence and absence of Ca2+, Zn2+, Cd2+ and Hg2+. DeltaR(ct) values for ds-DNA films with a single A-C mismatch is smaller than those of fully matched ds-DNA films.

PAMAM dendrimer-enhanced DNA biosensors based on electrochemical impedance spectroscopy

A novel, simple and sensitive DNA biosensor based on DNA-poly(amidoamine) (PAMAM) dendrimer nanoconjugates was developed by using the electrochemical impedance spectroscopy (EIS) technique. In this context, the assay relies on the hybridization of the single-stranded DNA (ssDNA) probe covalently conjugated on a mercaptoacetic acid self-assembled monolayer on gold electrodes, with the generation 4.5 (G-4.5) PAMAM-target DNA complex in solution. Once the double-stranded DNA (dsDNA) formed on the gold electrodes, G-4.5 PAMAM bearing carboxyls on the periphery was anchored on the hybrids; the changes of interfacial electron-transfer resistance (R(et)) of the electrodes were measured using an Fe(CN)(6)(3-/4-) redox probe by electrochemical impedance spectroscopy. The results showed that only a complementary sequence could form a dsDNA-PAMAM with the DNA-PAMAM probe and give an obviously enlarged R(et) value. The non-complementary and three-base mismatched sequence exhibited negligible impedance change compared with the blank measurement (the blank measurement means: ssDNA probe-modified gold electrode was directly measured by EIS). The unique spherical structure combining with more negative charges on the G-4.5 PAMAM periphery anchored on the hybrids could significantly amplify the hybridization signal (R(et) value), and the detection limit for measuring the full complementary sequence is down to pM level.

Detection of single-nucleotide mismatches using scanning electrochemical microscopy

Probing ds-DNA films in the presence of Zn(2+) ions by scanning electrochemical microscopy (SECM) allows the unequivocal detection of a single-nucleotide mismatch and provides information about its position within the duplex.

Electrochemical DNA biosensors: protocols for intercalator-based detection of hybridization in solution and at the surface

An electrochemical DNA biosensor is a device that utilizes the inherent ability of two complementary strands of nucleic acids to form a double helix. The specificity of this reaction, namely hybridization, is used in the detection of target DNA sequences with a view toward developing point-of-care devices. Since the early 1990s, great progress has been made in this field, but there are still numerous challenges to overcome. This chapter describes the components of an electrochemical DNA biosensor for researchers new to the field, paying particular attention to intercalator-based DNA biosensors. We will use a well-defined electro-active DNA intercalator Hoechst 33258, as our running example. Two of the most classic DNA sensing methods: solution-based and surface-immobilized methods are discussed, along with guiding notes that would help identify and overcome possible problems in a typical electrochemical DNA biosensor experiment.

Innovative integrated system for real-time measurement of hybridization and melting on standard format microarrays

Despite the great popularity and potential of microarrays, their use for research and clinical applications is still hampered by lengthy and costly design and optimization processes, mainly because the technology relies on the end point measurement of hybridization. Thus, the ability to monitor many hybridization events on a standard microarray slide in real time would greatly expand the use and benefit of this technology, as it would give access to better prediction of probe performance and improved optimization of hybridization parameters. Although real-time hybridization and thermal denaturation measurements have been reported, a complete walk-away system compatible with the standard format of microarrays is still unavailable. To address this issue, we have designed a biochip tool that combines a hybridization station with active mixing capability and temperature control together with a fluorescence reader in a single compact benchtop instrument. This integrated live hybridization machine (LHM) allows measuring in real time the hybridization of target DNA to thousands of probes simultaneously and provides excellent levels of detection and superior sequence discrimination. Here we show on an environmental single nucleotide polymorphism (SNP) model system that the LHM enables a variety of experiments unachievable with conventional biochip tools.

An enzyme-based E-DNA sensor for sequence-specific detection of femtomolar DNA targets

In this work, we report an enzyme-based E-DNA sensor for the sequence-specific detection of nucleic acids. This DNA sensor employs a "stem-loop" DNA probe dually labeled with biotin and digoxigenin (DIG). The probe is immobilized at an avidin-modified electrode surface via the biotin-avidin bridge, and the DIG serves as an affinity tag for the enzyme binding. In the initial state of the sensor, the probe adopts the stem-loop structure, which shields DIG from being approached by a bulky horseradish peroxidase-linked-anti-DIG antibody (anti-DIG-HRP) due to the steric effect. After hybridization, the probe undergoes a significant conformational change, forcing DIG away from the electrode. As a result, the DIG label becomes accessible by the anti-DIG-HRP, and the target hybridization event can be sensitively transduced via the enzymatically amplified electrochemical current signal. By using this new strategy, we demonstrate that the prototype E-DNA sensor has been able to detect as low as femtomolar DNA targets with excellent differentiation ability for even single mismatches.

Unlabeled hairpin-DNA probe for the detection of single-nucleotide mismatches by electrochemical impedance spectroscopy

An unlabeled hairpin-DNA probe was used for the detection of eight single-nucleotide mismatches by electrochemical impedance spectroscopy (EIS). Upon hybridization of the target strand with the hairpin DNA probe, the stem-loop structure is opened and forms a duplex DNA. Accordingly, the film thickness is increased, which causes differences in the electrical properties of the film before and after hybridization. Randles equivalent circuits were employed to evaluate the EIS result. The differences in the charge-transfer resistance DeltaR(CT) between hairpin DNA (before hybridization) and duplex DNA (after hybridization) shows the consequence of a large structural rearrangement from hairpin to duplex. If a single-nucleotide mismatch is present in the center of the duplex, the difference in charge-transfer resistance DeltaR(CT) between B-DNA in the absence and presence of Zn(2+) allows the unequivocal detection of all eight single-nucleotide mismatches. The detection limit was measured, and DeltaR(CT) allows the discrimination of a single-nucleotide mismatch with the concentration of the target strand as low as 10 pM.