DOPA-Mediated Reduction Allows the Facile Synthesis of Fluorescent Gold Nanoclusters for Use as Sensing Probes for Ferric Ions

Carbon dots-based dual-emission ratiometric fluorescent sensors for fluorescence and visual detection of hypochlorite and Cu2

Carbon dots (CDs) with blue emission were synthesized by solvothermal method using hydroquinone and 5-aminoisphthalic acid as precursors. The strong oxidation of ClO- caused the fluorescence quenching of CDs at 405 nm, and synchronously generated a new emission peak at 500 nm. Furthermore, upon the addition of Cu2+ to CDs-ClO- system, the green fluorescence at 500 nm was quenched, while the blue emission at 405 nm remained unchanged, due to the complexation between Cu2+ and the amino group on the CDs surface. Meanwhile, the fluorescence color of system changed from blue to bright green and then to dark blue by sequentially increasing the concentrations of ClO- and Cu2+. The fluorescence signal of F500/F405 exhibited a linear relationship with the concentration of ClO- and Cu2+ in a certain range, respectively. Thus, a ratiometric fluorescence sensor based on the obtained CDs were developed to sequentially detect ClO- and Cu2+ with detection limits of 0.40 μM and 0.31 μM, respectively. Additionally, the CDs were mixed with polyvinyl alcohol hydrogel to form test strips, which were successfully used for visual detection of ClO- and Cu2+. Satisfactory results were also obtained in the analysis of ClO- and Cu2+ in actual water samples.

Biogenic fabrication of a gold nanoparticle sensor for detection of Fe3+ ions using a smartphone and machine learning

In recent years, smartphones have been integrated into rapid colorimetric sensors for heavy metal ions, but challenges persist in accuracy and efficiency. Our study introduces a novel approach to utilize biogenic gold nanoparticle (AuNP) sensors in conjunction with designing a lightbox with a color reference and machine learning for detection of Fe3+ ions in water. AuNPs were synthesized using the aqueous extract of Eleutherine bulbosa leaf as reductants and stabilizing agents. Physicochemical analyses revealed diverse AuNP shapes and sizes with an average size of 19.8 nm, with a crystalline structure confirmed via SAED and XRD techniques. AuNPs exhibited high sensitivity and selectivity in detection of Fe3+ ions through UV-vis spectroscopy and smartphones, relying on nanoparticle aggregation. To enhance image quality, we developed a lightbox and implemented a reference color value for standardization, significantly improving performance of machine learning algorithms. Our method achieved approximately 6.7% higher evaluation metrics (R 2 = 0.8780) compared to non-normalized approaches (R 2 = 0.8207). This work presented a promising tool for quantitative Fe3+ ion analysis in water.

Tripeptide-Assisted Gold Nanocluster Formation for Fe3+ and Cu2+ Sensing

Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine's reduction capability under alkaline conditions. We investigated tyrosine's role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine-cysteine-tyrosine (YCY) and serine-cysteine-tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.

Fast, Selective and Sensitive Fluorescence Detection of Levofloxacin, Fe3+ and Cu2+ Ions in 100% Aqueous Solution Via Their Reciprocal Recognition

The fluorescence detection of ions and pharmaceutical effluents by using organic chemosensors is a valuable surrogate to the currently existing expensive analytical methods. In this regard, the design of multi-functional chemosensors to recognize desirable guests is of utmost importance. In this study, we first show that levofloxacin (LVO) is able to use as a fluorescent chemosensor for the detection of biologically important Cu2+ (turn-off) and Fe3+ (turn-on) ions via independent signal outputs in 100% aqueous buffer solutions. Next, using the reciprocal recognition of LVO and Fe3+ provides a unique emission pattern for the detection of LVO. This approach exhibited a high specificity to LVO among various pharmaceutical samples, namely acetaminophen (AC), azithromycin (AZ), gemifloxacin (GEM) and ciprofloxacin (CIP) and also showed great anti-interference property in urine. The attractive features of this sensing system are availability, easy-to-use, high sensitivity (limit of detection = 18 nM for Cu2+, 22 nM for Fe3+ and 0.12 nM for LVO), rapid response (5 s) with an excellent selectivity.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Graphitic carbon nitride derived probes for the recognition of heavy metal pollutants of environmental concern in water bodies

Graphitic carbon nitride (g-CN) has a number of valuable features that have been recognized during the studies related to its photocatalytic activity enhancement derived by visible light. Because of these characteristics, g-CN can be used as a detecting signal transducer with different transmission modalities. The latest up-to-date detection capabilities of modified g-CN nanoarchitectures are covered in this study. The structural features and synthetic methodologies have been discussed in a number of reports. Herein, employment of the g-CN as a promising probing modality for the recognition of different toxic heavy metals is the promising feature of the present study.

Gold Nanocluster-Based Ratiometric Probe with Surface Structure Regulation-Triggered Sensing of Hydrogen Sulfide in Living Organisms

The development of reliable probes for in vivo detection of hydrogen sulfide (H₂S) with high sensitivity and selectivity is of great significance due to its key roles in many pathological and physiological processes. Herein, it was found that H₂S could finely regulate surface structure of gold nanoclusters (AuNCs) through reduction of surface Au(I)-ligand motifs and further quench their fluorescence by a two-stage kinetic reaction process. Stage I showed the H₂S-assisted surface Au(I)-ligand reduction and Au(0) core growth with a rapid fluorescence decrease; stage II showed the surface structure optimization and reconstruction with a relatively slow fluorescence quenching. By virtue of the excellent fluorescence response of AuNCs to H₂S, a novel ratiometric fluorescence probe (RBDA) for sensing H₂S was designed through electrostatic attraction-induced fluorescence resonance energy transfer (FRET) between AuNCs and rhodamine B. The probe was facilely prepared, showing a straightforward, rapid ratiometric fluorescence response to H₂S with built-in self-calibration. It presented the high detection sensitivity with a detection limit (LOD) of 56 nM and an excellent sensing selectivity for H₂S over various other biological species. The probe was demonstrated to possess high biostability, low cytotoxicity, good cell and issue penetrability, and favorable biocompatibility. It realizes successful monitoring of both exogenous and endogenous H₂S levels in living cells and zebrafish.

Nucleic acid drug vectors for diagnosis and treatment of brain diseases

Nucleic acid drugs have the advantages of rich target selection, simple in design, good and enduring effect. They have been demonstrated to have irreplaceable superiority in brain disease treatment, while vectors are a decisive factor in therapeutic efficacy. Strict physiological barriers, such as degradation and clearance in circulation, blood-brain barrier, cellular uptake, endosome/lysosome barriers, release, obstruct the delivery of nucleic acid drugs to the brain by the vectors. Nucleic acid drugs against a single target are inefficient in treating brain diseases of complex pathogenesis. Differences between individual patients lead to severe uncertainties in brain disease treatment with nucleic acid drugs. In this Review, we briefly summarize the classification of nucleic acid drugs. Next, we discuss physiological barriers during drug delivery and universal coping strategies and introduce the application methods of these universal strategies to nucleic acid drug vectors. Subsequently, we explore nucleic acid drug-based multidrug regimens for the combination treatment of brain diseases and the construction of the corresponding vectors. In the following, we address the feasibility of patient stratification and personalized therapy through diagnostic information from medical imaging and the manner of introducing contrast agents into vectors. Finally, we take a perspective on the future feasibility and remaining challenges of vector-based integrated diagnosis and gene therapy for brain diseases.

Fluorescent copper conjugated curcumin cysteine nanoprobe for selective determination of Fe3+ and G-quadruplex DNA

The synthesis of fluorescent copper-curcumin-cysteine (Cu-CC) as a sensing platform is reported. The synthesized probe has been confirmed by UV-visible spectroscopy, FT-IR, XRD, SEM, and TEM characterization techniques, respectively. The mechanistic aspects of selective sensing of Fe³⁺ and detection of different G-quadruplex DNA have been illustrated based on the "turn-off-on" concept of a regeneratable fluorescence sensing probe at λ_ex 450 nm. Interestingly, we have noticed a high selectivity to Fe³⁺ ion by the developed Cu-CC sensing probe in comparison with other metal ions. Furthermore, the restoration of fluorescence of the sensing probe in the presence of different DNA sequences is illustrating a cost-effective, convenient, and reliable detection methodology of DNA detection. It is highly sensitive for the determination of Pu27, promoter c-MYC quadruplex DNA in a wide linear range of 100-700 nM having a detection limit of 13.1 nM (RSD: 0.15%) and sensitivity of 37.2 cps/nM. Whereas, the Pu18 and H-telo telomeric DNA sequences are showing a narrow linear range, i.e., 10 nM-200 nM and 10 nM-180 nM, respectively. The real-world sample analysis performance of the regeneratable sensing probe for Pu27 DNA detection in fresh human blood serum samples is showing a satisfactory result.

Novel schiff base as Fe3+ sensor as well as an antioxidant and its theoretical studies

A novel Schiff base derivative L (N1-(thiophene-2-ylmethylene)benzene-1,2-diamine) was synthesized via condensation reaction of 3-thiophene carboxaldehyde and 1,2-diamino benzene. The synthesized compound was authenticated using 1 H NMR, 13 C NMR, HRMS, and IR spectroscopy. The compound L was found to be a Fe3+ sensor with the complexation ratio of 1 : 3 as revealed by Job’s plot with maximum absorption at 318 nm. The photophysical properties were studied using absorption and emission spectra. DFT and TD-DFT studies were carried out in order to support the photophysical outcomes of compound L. An antioxidant behaviour of compound L was studied using TAC, FRAP, and DPPH assays and it was found to be showing better TAC activity than the used standard i.e. gallic acid.

Microwave-Assisted Rapid Synthesis of Luminescent Tryptophan-Stabilized Silver Nanoclusters for Ultra-Sensitive Detection of Fe(III), and Their Application in a Test Strip

A new preparation method for extreme fluorescent green emission tryptophan-stabilized silver nanoclusters (Tryp-AgNCs) is presented in this scientific research. The produced silver nanoclusters are dependent on tryptophan amino acid which contributes to normal growth in infants and the sublimation and recovery of human protein, muscles, and enzymes. Herein, we have introduced a green method by using microwave-assisted rapid synthesis. The subsequent silver nanoclusters (AgNCs) have excitation/emission peaks at 408/498 nm and display a considerable selectivity to Fe(III) ions. The tryptophan amino acid molecule was used in the synthesis process as a reducing and stabilizing agent. The Tryp-AgNCs’ properties were investigated in terms of morphology, dispersity, and modification of the synthesized particles using different advanced instruments. The luminescent nanoclusters traced the Fe(III) ions by the luminescence-quenching mechanism of the Tryp-AgNCs luminescence. Therefore, the extreme selectivity of the prepared nanoclusters was exhibited to the Fe(III) ions, permitting the sensitive tracing of ferric ions in the lab and in the real environmental samples. The limit of detection for Fe(III) ions based on Tryp-AgNCs was calculated to be 16.99 nM. The Tryp-AgNCs can be efficiently applied to a paper test strip method. The synthesized nanoclusters were used efficiently to detect the Fe(III) ions in the environmental samples. Moreover, we examined the reactivity of Tryp-AgNCs on various human tumor cell lines. The results show that the Tryp-AgNCs exhibited their activity versus the cancer cells in a dose-dependent routine for the perceived performance versus the greatest-used cancer cell lines.

Understanding of chiral site-dependent enantioselective identification on a plasmon-free semiconductor based SERS substrate

Chiral differentiation is an important topic in diverse fields ranging from pharmaceutics to chiral synthesis. The improvement of sensitivity and the elucidation of the mechanism of chiral recognition are still the two main challenges. Herein, a plasmon-free semiconductive surface-enhanced Raman spectroscopy (SERS) substrate with sensitive chiral recognition ability is proposed for the discrimination of enantiomers. A homochiral environment is constructed by typical π–π stacking between l-tryptophan (l-Trp) and phenyl rings on well-aligned TiO₂ nanotubes (TiO₂ NTs). Using 3,4-dihydroxyphenylalanine (DOPA) enantiomers as the targets and the chelating interaction of Fe³⁺–DOPA for the onsite growth of Prussian blue (PB), the enantioselectivity difference between l-DOPA and d-DOPA on the homochiral substrate can be directly monitored from PB signals in the Raman-silent region. By combining the experimental results with molecular dynamic (MD) simulations, it is found that satisfactory enantioselective identification not only requires a homochiral surface but also largely depends on the chiral center environment-differentiated hydrogen-bond formation availability.

An intelligent enantioselective identification strategy is designed to demonstrate that both enantioselectivity and stereoselectivity are crucial factors for chiral sensing.

The Role of N and S Doping on Photoluminescent Characteristics of Carbon Dots from Palm Bunches for Fluorimetric Sensing of Fe3+ Ion

This work aims to enhance the value of palm empty fruit bunches (EFBs), an abundant residue from the palm oil industry, as a precursor for the synthesis of luminescent carbon dots (CDs). The mechanism of fIuorimetric sensing using carbon dots for either enhancing or quenching photoluminescence properties when binding with analytes is useful for the detection of ultra-low amounts of analytes. This study revealed that EFB-derived CDs via hydrothermal synthesis exceptionally exhibited luminescence properties. In addition, surface modification for specific binding to a target molecule substantially augmented their PL characteristics. Among the different nitrogen and sulfur (N and S) doping agents used, including urea (U), sulfate (S), p-phenylenediamine (P), and sodium thiosulfate (TS), the results showed that PTS-CDs from the co-doping of p-phenylenediamine and sodium thiosulfate exhibited the highest PL properties. From this study on the fluorimetric sensing of several metal ions, PTS-CDs could effectively detect Fe3+ with the highest selectivity by fluorescence quenching to 79.1% at a limit of detection (LOD) of 0.1 µmol L−1. The PL quenching of PTS-CDs was linearly correlated with the wide range of Fe3+ concentration, ranging from 5 to 400 µmol L−1 (R2 = 0.9933).

Real time sensor for Fe3+, Al3+, Cu2+ & PPi through quadruple mechanistic pathways using a novel dipodal quinoline-based molecular probe

A quinoline-based small molecular probe, H₂L was designed, synthesized and characterized by different spectroscopic methods. It was utilized as a multi-responsive probe for the detection of Fe³⁺, Al³⁺, Cu²⁺ and PPi. It showed very selective instant turn-on fluorimetric response towards Fe³⁺and Al³⁺ with a detection limit in nanomolar range. Solutions of H₂L containing Fe³⁺ or Al³⁺ could sequentially sense PPi by a turn-off mechanism. Also, H₂L could determine the presence of Cu²⁺ very selectively among a series of other metal ions by a sharp change in colour. Detection of Cu²⁺ through colorimetry was further investigated by systematic UV-Vis studies and the potential of H₂L to act as a potential colorimetric sensor for Cu²⁺ was suitably established. Filter-paper strip experiments were conducted to demonstrate the practical utility of the proposed sensor. Potential applications of H₂L as a sensor for pH in the acidic range has also been explored.

Fluorescence determination of Fe(iii) in drinking water using a new fluorescence chemosensor

A new fluorescence chemosensor based on (Z)-2-(1-(3-oxo-3H-benzo[f]chromen-2-yl)ethylidene)hydrazine-1-carbothioamide (CEHC) has been developed for the determination of Fe(iii) in drinking water. The optimum conditions were acetate buffer solution with a pH 5.0. In this approach, the determination of Fe(iii) is based on static quenching of the luminescence of the probe upon increasing concentrations of Fe(iii). The CEHC sensor binds Fe(iii) in a 1 : 1 stoichiometry with a binding constant K_a = 1.30 × 10⁴ M⁻¹. CEHC responds to Fe(iii) in a way that is more sensitive, selective, and quick to turn off the fluorescence than to other heavy metal ions. Selectivity was proved against seven other metal ions (Mn(ii), Al(iii), Cu(ii), Ni(ii), Zn(ii), Pb(ii), and Cd(ii)). The calibration curve was constructed based on the Stern–Volmer equation. The linear range was 2.50–150 μM with the correlation coefficient of 0.9994, and the LOD was 0.76 μM. The method was successfully applied to determine Fe(iii) in drinking water samples, and the accuracy of the chemosensor was validated by atomic absorption spectrometry.

A new fluorescence chemosensor based on (Z)-2-(1-(3-oxo-3H-benzo[f]chromen-2-yl)ethylidene)hydrazine-1-carbothioamide (CEHC) has been developed for the determination of the fluorescence probe of Fe(iii) in drinking water.

Hydrothermal synthesis of Eu3+-doped BaMoO4 fluorescent probe for the selective detection of Fe3+ ions

BaMoO4:Eu3+ fluorescent probe materials have high selectivity and sensitivity for Fe3+-ion detection and can be applied to the detection of Fe3+ in actual wastewater.

One-step Hydrothermal Synthesis of N-doped Fluorescent Carbon Dots from Fermented Rice with Highly Selective Characteristics for Label-free Detection of Fe3+ Ions and as Fluorescent Ink

In our work, N-doped carbon dots (CDs) were synthesized by a facile hydrothermal method with fermented rice as the carbon source. The CDs show bright blue fluorescence, and the maximum emission wavelength was 380 nm with wavelength ranges from 320 to 560 nm. Interestingly, these as-prepared CDs show strong blue photoluminescent properties under the radiation with ultraviolet (UV) light. Moreover, it also exhibits good sensitive fluorescence detection for Fe³⁺ ions; the detection limit is 0.1 μM, which is significant fluorescence quenching based on CDs. Other representative metal ions were further tested to verify their selectivity, which provides a solid underpinning for the practical use in Fe³⁺ ions detection in real samples, e.g. underground water. In addition, the CDs work well as a fluorescent ink and can encrypt and store information.

Recovered fluorescence of the Cd-nanocluster-Hg(II) system based on experimental results and computational methods

Human Serum Albumin, a plasma protein existing in abundance, was selected as a template and reducing agent for the formation of CdNCs due to two factors: its stability and low cost. In the presence of human serum albumin (HSA), a selective and sensitive, low-cost, environmental friendly, and label-free off-on fluorescent sensor was synthesized and characterized for a bioaccumulating and toxic heavy metal, Hg²⁺ and biothiols. HSA - CdNCs can specifically recognize Hg²⁺ through aggregating NCs and causing fluorescence quenching. Subsequently, with increase in the concentration of biothiols, Hg²⁺ was eliminated from the surface of NC, while the fluorescence was restored. The calculated limits of detection (LOD) were 55 pM for Hg(II) and 14 nM for GSH, respectively. The assay was capable of detecting Hg²⁺ ions and GHS at different concentrations in the range of 0.008 to 8530 nM and 7.5-5157 nM, respectively. Furthermore, the appropriate molecular mechanics (MM) as well as quantum mechanical (QM) methods were performed to optimize and the theoretical investigation of the discussed HSA-profile structures and its interactions with the Cd-NCs (one atom of Cd), Hg²⁺ and glutathione (G).

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

Novel luminescent Schiff's base derivative with an azo moiety for ultraselective and sensitive chemosensor of Fe3+ ions

Chemosensors with ultrasensing capabilities for detection of metal ions have received particular attention when using luminescent organic compounds. Even though hundreds of chemosensor agents have been reported for Fe³⁺ ion sensing, the designs of those molecules have been complicated and time consuming, in addition to having limited application for aquatic samples due to their poor hydrophilicity. Here, we synthesized a novel azo-imine derivative (L2) that showed ultrasensitive and selective sensing for Fe³⁺ ions. L2 exhibited ultraselective detection of Fe³⁺ ions with a turn-off of its emission intensity at 341 nm in H₂ O:MeOH (4:1 v/v) aqueous medium. This quenching phenomenon was in good agreement with its colour change from orange-yellowish to colourless. Its capability was shown due to its very low limit of detection and limit of quantification values of 0.31 and 1.04 μM, respectively. The interference study showed that L2 is ultraselective for the detection of Fe³⁺ ions without a significant reduction in its sensing capability even in competitive metal mixtures. Furthermore, direct Fe³⁺ quantification of tap and drinking water showed that L2 gave good recovery percentages. These findings demonstrated that the Schiff's base with an azo fluorophore derivative is a potential chemosensor agent for Fe³⁺ ions sensing applications in aqueous media.

Boron, and nitrogen co-doped carbon dots as a multiplexing probe for sensing of p-nitrophenol, Fe (III), and temperature

Boron and nitrogen co-doped carbon dots (B, N-CDs) were fabricated through a simple, one-step hydrothermal reaction of citric acid, boric acid, and tris base. The obtained B, N-CDs exhibit excitation-dependent fluorescence, high quantum yield (QY), biocompatibility, photostability, and aqueous solubility. The QY was substantially increased to 57% by doping boron atoms. Furthermore, the fluorescence intensity of B, N-CDs was temperature-dependent and decreased linearly from 283 to 333 K. The prepared B, N-CDs were used as a fluorescence probe for the detection ofpara-nitrophenol (p-NP) and Fe (III) ions with low detection limits of 0.17μM and 0.30μM, respectively. Moreover, the presence of p-NP could be further confirmed by a colorimetric assay. The fluorescent probe has been applied to determine p-NP and Fe (III) in a spiked serum sample and spiked water samples (lake and tap water). Moreover, the as-prepared B, N-CDs were of low toxicity and capable of bioimaging.

Determination of Fe(Ⅲ) ion and cellular bioimaging based on a novel photoluminescent silicon nanoparticles

The determination approaches of Fe (Ⅲ) in biological samples were developed by a novel water-soluble silicon nanoparticles (SiNPs). The SiNPs were synthesized by a facile microwave-assisted method, and simultaneously featured strong blue fluorescence (photoluminescence quantum yield: 25.2%), long lifetime (~13.29 ns) and good photo-stability. The fluorescence intensities of SiNPs were gradually quenched with Fe (Ⅲ) concentration increasing from 2.0 to 50 μmol/L. The detection limit of the established method was 0.56 μmol/L and the precision for eleven replicate detections of 20 μmol/L Fe (Ⅲ) was 3.2% (relative standard deviation, RSD). The spiked recoveries were 99.0%-104.5%. Results of the lifetime decay and cyclic voltammetry (CV) evidenced that the electron transfer was responsible for the fluorescence quenching mechanism of SiNPs and Fe (Ⅲ). Moreover, the SiNPs were successfully applied in the determination of Fe(Ⅲ) in different environmental waters and human serum. Finally, the resulting SiNPs exhibited the green fluorescence in HeLa cells as the optical probe.

A novel selective fluorescent chemosensor for Fe 3+ ions based on phthalonitrile dimer: synthesis, analysis, and theoretical studies

Phenyl-4,4-di(3,6-dibutoxyphthalonitrile) ( 3 ) was synthesized by the reaction of 1,4-phenylenebisboronic acid ( 1 ) and 4-bromo-3,6-dibutoxyphthalonitrile ( 2 ), using Suzuki cross-coupling reaction. The newly synthesized compound ( 3 ) was characterized by FT-IR, MALDI-MS, ESI-MS, ¹ H-NMR, ¹³ C-NMR, and ¹³ C-DEPT-135-NMR. The fluorescence property of phenyl-4,4-di(3,6-dibutoxyphthalonitrile) ( 3 ) towards various metal ions was investigated by fluorescence spectroscopy, and it was observed thatthe compound ( 3 ) displayed a significantly 'turn-off' response to Fe ³⁺ , which was referred to 1:2 complex formation between ligand ( 3 ) and Fe ³⁺ . The compound was also studied via density functional theory calculations revealing the interaction mechanism of the molecule with Fe ³⁺ ions.

Two Cd(ii)-based metal–organic frameworks for the highly effective detection of Fe3+ ions and levofloxacin in aqueous media

Two new Cd(ii)-MOFs are hydrothermally synthesized and can be applied as dual-response sensors to identify Fe3+ and levofloxacin (LVX) with high selectivity, sensitivity and excellent reusability.

A novel iron quantum cluster confined in hemoglobin as fluorescent sensor for rapid detection of Escherichia coli

A new method based on fluorescent probe of iron quantum cluster has been proposed for rapid detection of Escherichia coli (E. coli). The iron quantum cluster was synthesized using hemoglobin as both a source of iron and a protective agent (Hb-FeQCs). The investigation of the sensitivity of Hb-FeQCs towards metal ions showed a highly selective turn off fluorescence for Cu²⁺. It suggests that Cu²⁺ can induce fluorescence quenching by binding to amino acids of Hb. The ability of E. coli bacteria to capture and reduce of Cu ions caused to efficient recovery of the fluorescence of Hb-FeQCs from Cu²⁺-caused quenching. This probe has a satisfactorily linear range of 0.35-35 μM for Cu²⁺ under the optimal iron quantum cluster concentration (500 μg/mL) with an 85 nM detection limit. Rapid and facile detection of E.coli bacteria with the limit of detection around 8.3 × 10³ CFU/mL was successfully achieved in the artificially contaminated urine, tap water, and DMEM samples within 30 min. The fluorescence recovery was investigated by different types of bacteria and only E. coli revealed 56% recovery which related to its capability to Cu²⁺ reduction and the great potential of the fluorescent probe for rapid detection of pathogenic E. coli bacteria. Furthermore, the Hb-FeQCs can detect E. coli bacteria in an infected urine sample by retrieving up to 74% of its fluorescence which is helpful to accelerate the diagnosis and treatment of urinary tract infection (UTI).

Phosphorus-Doped Carbon Quantum Dots as Fluorometric Probes for Iron Detection

Carbon quantum dots (CQDs), a novel fluorescent nanomaterial, have been extensively employed/explored in various applications, that is, biosensors, bioimaging, nanomedicine, therapeutics, photocatalysis, electrocatalysis, energy storage system, and so forth. In this study, we report the synthesis, characterization, and the application of phosphorus-doped CQDs (PCQDs), synthesized using trisodium citrate and phosphoric acid by the hydrothermal method. The effect of phosphorus doping on optical features and the formation of PCQDs have been explored elaborately by controlling the concentrations of precursors, reaction time, and the temperature. The fluorescent quantum yield for PCQDs was determined to be 16.1% at an excitation/emission wavelength of 310/440 nm. Also, the optical and structural properties of PCQDs were determined by using various spectroscopic and microscopic techniques. Static quenching of fluorescence was determined upon the addition of Fe3+ to PCQDs because of the formation of the fluorescent inactive complex (PCQDs-Fe3+). Hence, this chemistry leads to the development of a new fluorometric assay for the detection of Fe3+. The lower limit of Fe3+ detection is determined to be 9.5 nM (3σ/slope), with the linear fit from 20 nM to 3.0 μM (R 2 = 0.99). We have validated this new assay in the raw, ejected, and purified water samples of the RO plant by the standard addition method. These results suggest the possibility of developing a new commercial assay for Fe3+ detection in blood, urine, and various industrial waste and sewage water samples. Furthermore, recycling the pollutant water into the freshwater using filters that consist of PCQDs offers a great deal.

Highly Luminescent Copper Nanoclusters Stabilized by Ascorbic Acid for the Quantitative Detection of 4-Aminoazobenzene

As one of the widely studied metal nanoclusters, the preparation of copper nanoclusters (Cu NCs) by a facile method with high fluorescence performance has been the interest of researchers. In this paper, a simple, green, clean, and time-saving chemical etching method was used to synthesize water-soluble Cu NCs using ascorbic acid (AA) as the reducing agent. The as-prepared Cu NCs showed strong green fluorescence (with a quantum yield as high as 33.6%) and high ion stability, and good antioxidant activity as well. The resultant Cu NCs were used for the detection of 4-aminoazobenzene (one of 24 kinds of prohibited textile compounds) in water with a minimum detection limit of 1.44 μM, which has good potential for fabric safety monitoring.

Structural and functional analyses of organic molecules regulating biomineralization

Biomineralization by living organisms are common phenomena observed everywhere. Molluskan shells are representative biominerals that have fine microstructures with controlled morphology, polymorph, and orientation of CaCO3 crystals. A few organic molecules involved in the biominerals play important roles in the formation of such microstructures. Analyses of structure–function relationships for matrix proteins in biominerals revealed that almost all matrix proteins have an acidic region for the binding of calcium ion in CaCO3 crystals and interaction domains for other organic molecules. On the other hand, biomineralization of metal nanoparticles by microorganisms were also investigated. Gold nanoparticles and quantum dots containing cadmium were successfully synthesized by bacteria or a fungus. The analyses of components revealed that glycolipids, oligosaccharides, and lactic acids have key roles to synthesize the gold nanoparticle in Lactobacillus casei as reductants and dispersants. These researches about biomineralization will give new insights for material and environmental sciences in the human society.

Diphenylalanin nanofibers-inspired synthesis of fluorescent gold nanoclusters for screening of anti-amyloid drugs

Protein misfolding and aggregation into amyloid structures is linked with a number of pathophysiological disorders. In the past decade, significant progresses have been made in the drug discovery strategies against toxic aggregates. Although lack of specificity and high sensitivity for in vitro screening system still seen. Here we demonstrate a new targeting probe based on FF diphenylalanine peptide -protected gold nanoclusters (FF AuNCs). Diphenylalanine peptide has previously been shown to self-assemble into well-ordered fiber like the fibers that are observed in amyloid aggregates. We used of the self-assembly properties along with the ability of FF dipeptide in reduction of gold ions for synthesis of novel Au nanoclusters. We used FF AuNCs for monitoring of effectiveness of anti-amyloid drugs. Fluorescence was considerably diminished when drugs at different concentrations added, due to destruction of the amyloid fibers. Furthermore, the analysis of several components demonstrates significant selectivity against the amyloid disrupting molecules. Prepared FF AuNCs will gain possible strategy for in vitro screening of amyloid disrupting molecules.

Gold nanoclusters/graphene quantum dots complex-based dual-emitting ratiometric fluorescence probe for the determination of glucose

Herein, we report the design of a single-excitation/double-emission ratiometric fluorescence nanosensor for the determination of glucose. The sensing system combines glucose oxidation catalyzed by glucose oxidase, Fenton chemistry, Fe³⁺-sensitive fluorescent gold nanoclusters (AuNCs), and Fe³⁺-inert fluorescent graphene quantum dots (GQDs). We used orange-fluorescent AuNCs co-modified with bovine serum albumin and 3-mercaptopropionic acid as the indicator probe, and GQDs with the same excitation wavelength as the BSA/MPA-AuNCs, but with different emission wavelength, as the reference probe. The fluorescence intensity-ratio between 420 nm and 575 nm (F₄₂₀/F₅₇₅) was used to quantitatively determine glucose with a low detection limit of 0.18 μM, and the nanosensor was successfully used to detect glucose in human serum. This ratiometric fluorescence sensing system, based on AuNCs and GQDs, ensures sensitive and convenient determination of glucose, and has broad application prospects for biomedical-analysis applications.

Plant Part-Derived Carbon Dots for Biosensing

Carbon dots (CDs) are a new cluster of carbon atoms with particle size less than 10 nm. CDs also exhibit interesting fluorescence (FL) properties. CDs are attractive because of their fascinating characteristics including low toxicity, good water solubility, and tremendous biocompatibility. Recently, CDs have been investigated as biosensors for numerous target analytes. Meanwhile, the utilization of cheap and renewable natural resources not only fulfills the pressing requirement for the large-scale synthesis of CDs but also encourages the establishment of sustainable applications. The preparation of CDs using natural resources, i.e., plants, offers several advantages as it is inexpensive, eco-friendly, and highly available in the surroundings. Plant parts are readily available natural resources as the starting materials to produce CDs with different characteristics and attractive applications. Several review articles are now available covering the synthesis, properties, and applications of CDs. However, there is no specific and focused review literature discussing plant part-derived CDs for biosensing applications. To handle this gap, we provide a review of the progress of CDs derived from various plant parts with their synthesis methods, optical properties, and biosensing applications in the last five years. We highlight the synthesis methods and then give an overview of their optical properties and applications as biosensors for various biomolecules and molecules in biological samples. Finally, we discuss some future perspectives for plant part-derived CDs for better material development and applications.

Fluorescent gold nanocluster-based sensor for detection of alkaline phosphatase in human osteosarcoma cells

Gold nanoclusters (AuNCs) have attracted much attention as signal transducers in photoluminescence chemical/biological sensors. Herein, we employ bovine serum albumin/3-mercaptopropionic acid co-modified AuNCs as a fluorescence probe, Fe³⁺ as a quencher, and pyrophosphate as an alkaline phosphatase (ALP) substrate and Fe³⁺ chelator to design a novel biosensor for ALP detection, achieving a detection linear range of 0.8-16 U/L and a detection limit of 0.78 U/L. The developed method is successfully applied to the detection of ALP in human osteosarcoma cells and is shown to be suited for ALP inhibitor screening.

A naphthylamide based fluorescent probe for detection of Al3+, Fe3+, and CN- with high sensitivity and selectivity

A naphthylamide based fluorescent chemosensor, N,N'-(1,2-phenylene)bis(1-hydroxy-2-naphthamide) (H₄L), for detection of Fe³⁺ and Al³⁺ cations as well as CN^- anion is reported. This compound has been synthesized by a novel and facile synthetic method with high yield and characterized by FT-IR, ¹H NMR, elemental analysis, and UV-Vis spectroscopy. It could detect Fe³⁺ and Al³⁺ ions in different media with different excitation and emission wavelengths. In DMSO solution, H₄L showed selective ON-OFF quenching of its 451 nm emission in the presence of Fe³⁺. On the other hand, in DMF solution, H₄L exhibited selective OFF-ON fluorescence upon the addition of Al³⁺, the intensity at 429 nm increases drastically by 24-fold. Also, among the anions, the probe can selectively distinguish CN^- by deprotonation of OH and NH groups, as proved by ¹H NMR titration. TD-DFT calculation supports the UV-Vis and fluorescence measurements of the chemosensor.

Utilizing the interfacial reaction of naphthalenyl thiosemicarbazide-modified carbon dots for the ultrasensitive determination of Fe (III) ions

Since thiosemicarbazide contains numerous nitrogen and sulfur atoms in its structural formula that enhance its strong coordinating abilities with metal ions, it is always selected as the mother molecule for the design of metal-ion sensors. In this report, a thiosemicarbazide derivative (4-naphthalenyl-3-thiosemicarbazide (NTSC)) was synthesized via a single step process and covalently conjugated onto the surfaces of carbon dots (CDs). The modified CDs demonstrated excellent monodispersity, good photostability, and tunable luminescence properties. More importantly, the CDs retained a highly specific Fe³⁺ recognition capacity in contrast to other competing metal ions. Fe³⁺ can efficiently quench the fluorescence of CDs even at fairly low concentration (30μM) with a detection limit as low as 1.68nM. The fluorescence quenching kinetics are likely to involve static quenching, which is caused by specific interactions between NTSC-CDs and Fe³⁺ toward the formation of a ground state complex. Due to their excellent optical performance, low toxicity, and good biocompatibility the NTSC-CDs may be applied to the imaging and monitoring of Fe³⁺ in bacillus subtilis. In effect we successfully fabricated an effective fluorescent nanosensor for both the quantitative detection of Fe³⁺ in aqueous solutions, and its real-time imaging in vivo.