Electrospun Nanofibers as Substrates for Surface-Assisted Laser Desorption/Ionization and Matrix-Enhanced Surface-Assisted Laser Desorption/Ionization Mass Spectrometry

Point-of-care applicable metabotyping using biofluid-specific electrospun MetaSAMPs directly amenable to ambient LA-REIMS

In recent years, ambient ionization mass spectrometry (AIMS) including laser ablation rapid evaporation IMS, has enabled direct biofluid metabolome analysis. AIMS procedures are, however, still hampered by both analytical, i.e., matrix effects, and practical, i.e., sample transport stability, drawbacks that impede metabolome coverage. In this study, we aimed at developing biofluid-specific metabolome sampling membranes (MetaSAMPs) that offer a directly applicable and stabilizing substrate for AIMS. Customized rectal, salivary, and urinary MetaSAMPs consisting of electrospun (nano)fibrous membranes of blended hydrophilic (polyvinylpyrrolidone and polyacrylonitrile) and lipophilic (polystyrene) polymers supported metabolite absorption, adsorption, and desorption. Moreover, MetaSAMP demonstrated superior metabolome coverage and transport stability compared to crude biofluid analysis and was successfully validated in two pediatric cohorts (MetaBEAse, n = 234 and OPERA, n = 101). By integrating anthropometric and (patho)physiological with MetaSAMP-AIMS metabolome data, we obtained substantial weight-driven predictions and clinical correlations. In conclusion, MetaSAMP holds great clinical application potential for on-the-spot metabolic health stratification.

Hybrid Surface Design of Organosilica Films for Laser Desorption/Ionization Mass Spectrometry: Low Free Energy Surface with Interactive Sites

Laser desorption/ionization mass spectrometry (LDI-MS) assisted by solid substrates is useful for the facile and rapid analysis of low-molecular-weight compounds. The LDI performance of solid substrates depends on not only a surface morphology but also the surface functionalities dominating the surface-analyte interactions. In this study, we propose a hybrid surface design for LDI substrates, realizing both weak surface-analyte interaction and homogeneous distribution of analytes. The hybrid surface consisted of a mixture of fluoroalkylsilane (FAS), SiO₂, and TiO₂ and was formed on organosilica substrates containing UV-laser-absorbing naphthalimide moieties. To investigate the surface interactions, the hybrid surface as well as conventional hydrophobic surfaces treated with FAS only were prepared on flat organosilica films. Contact angle measurements and surface free energy analysis showed that the hybrid surface exhibited the highest hydrophobicity, while the contribution of the polar and hydrogen bonding terms in the surface free energy was clearly observed. The organosilica film with the hybrid surface demonstrated significant LDI performance for the detection of biorelated compounds (e.g., peptides, phospholipids, and medicines), and a high detection ability was particularly observed for peptides. The substrate surface promoted the desorption/ionization of analytes through a low surface free energy and uniform distribution of the analytes due to the interactive sites. The hybrid surface design was then applied to a nanostructured organosilica substrate consisting of a base film and a nanoparticle layer. The signal intensity of a peptide was further improved approximately 3-fold owing to the increased surface area of the nanostructured substrate, and the limit of detection reached the subfemtomole order. Our hybrid surface design is expected to improve the LDI performance of various nanostructured solid substrates.

Surface Siloxane-Modified Silica Materials Combined with Metal-Organic Frameworks as Novel MALDI Matrixes for the Detection of Low-MW Compounds

Surface siloxane (3-aminopropyl triethoxysilane hydrolyzates)-modified silica materials were used as "initiators", which resulted in the release and desorption of intact molecules adsorbed on the surface of a matrix. A covalently cross-linked MIL-53(Al) material was used to enhance the ionization of analytes. Herein, we have provided an efficient matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) matrix strategy, which responded to both ion and laser irradiation with low background interference in the low-molecular-weight (MW) region. The matrixes MIL-53(Al), SBA-15@APTES, SiO₂@APTES, SBA-15@APTES@MOF, and SiO₂@APTES@MOF were synthetized and used for the analysis of a series of low-MW compounds to verify the effectiveness of the strategies. Compared to conventional matrixes, the surface-modified SBA-15@APTES@MOF and SiO₂@APTES@MOF had low background, high sensitivity, extensive applicability, good stability, and ultrahigh tolerance of salt concentrations. The detection limits of standard analytes were determined to range from 0.1 to 1 × 10^-5 mg/mL for 16 amino acids as well as citric acid, reserpine, tetraethylammonium chloride, melamine, bisphenol A, and malachite green. These results could help in designing more efficient nanostructure-initiator materials and further promote the application of MALDI-TOF MS.

Ultrathin Homogenous AuNP Monolayers as Tunable Functional Substrates for Surface-Assisted Laser Desorption/Ionization of Small Biomolecules

A series of ultrathin, homogenous gold nanoparticle (AuNP) substrates for surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) were prepared using a simple air/water interface approach. These SALDI substrates enabled soft ionization and provided significant improvements in terms of signal intensities and reduced background levels in comparison to other AuNP morphologies for different analytes such as fatty acids, peptides, amino acids, saccharides, and drugs. Through different microscopic and spectroscopic methods, we determined that the packing homogeneity of the [AuNP]_n substrates played a vital role in the efficiency of the SALDI process. We demonstrated that the signal intensities of the investigated analytes were readily optimized by manipulating the thickness of the [AuNP]_n substrates. The desorption/ionization efficiency increased as a function of the number of layers and then reached a saturation point. The optimized [AuNP]_n substrates not only exhibited high SALDI-MS desorption/ionization efficiencies but also showed excellent reproducibilities of the analyte signals.

Atmospheric Pressure Plasma-Treated Carbon Nanowalls’ Surface-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (CNW-SALDI-MS)

Carbon nanowalls (CNWs), vertically standing highly crystallizing graphene sheets, were used in the application of a surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF-MS). The CNW substrates solved the issues on interferences of matrix molecules and alkali metal addition ions in low-weight molecule detection. Before SALDI sample preparations, the hydrophobic CNW was treated by atmospheric pressure plasma for exposing hydrophilicity to the CNWs’ surface. Detection of water soluble amino acids, arginine, was demonstrated.

Recent advances in single-cell analysis by mass spectrometry

Cells are the most basic structural units that play vital roles in the functioning of living organisms. Analysis of the chemical composition and content of a single cell plays a vital role in ensuring precise investigations of cellular metabolism, and is a crucial aspect of lipidomic and proteomic studies. In addition, structural knowledge provides a better understanding of cell behavior as well as the cellular and subcellular mechanisms. However, single-cell analysis can be very challenging due to the very small size of each cell as well as the large variety and extremely low concentrations of substances found in individual cells. On account of its high sensitivity and selectivity, mass spectrometry holds great promise as an effective technique for single-cell analysis. Numerous mass spectrometric techniques have been developed to elucidate the molecular profiles at the cellular level, including electrospray ionization mass spectrometry (ESI-MS), secondary ion mass spectrometry (SIMS), laser-based mass spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). In this review, the recent advances in single-cell analysis by mass spectrometry are summarized. The strategies of different ionization modes to achieve single-cell analysis are classified and discussed in detail.

A flexible and multifunctional metal–organic framework as a matrix for analysis of small molecules using laser desorption/ionization mass spectrometry

Fast screening of multi-functional MOFs as SALDI-MS matrices for the detection of small molecules and simultaneous enrichment and detection of analytes.

A robust and homogeneous porous poly(3,4-ethylenedioxythiophene)/graphene thin film for high-efficiency laser desorption/ionization analysis of estrogens in biological samples

Herein, a robust and homogeneous porous poly(3,4-ethylenedioxythiophene)/graphene (PEDOT/graphene) thin film surface-assisted laser desorption/ionization (SALDI) functional platform was prepared through a rapid and facile in-situ photopolymerization method. The graphene-embedded PEDOT skeleton well circumvented the aggregation-related problems in the traditional carbon-based SALDI method which combined with time-of-flight mass spectrometer (TOF MS). As a result, the reproducibility and quantitative capacity of the SALDI platform were significantly improved. Furthermore, the highly efficient adsorption performance of the PEDOT/graphene thin film was demonstrated in terms of in vitro and in vivo solid-phase microextraction (SPME) extraction. It showed that porous morphology with abundant graphene doping favored the adsorption and enrichment of target analytes. Owing to the excellent adsorption capability of the PEDOT/graphene thin film and the inherent strong laser absorption ability of graphene, expected SALDI effect (3-13 times higher than the commercial nanomaterial-assisted LDI plate) and quantitative analysis (linear range 0.5-100 μg L^-1) of the PEDOT/graphene functional surfaces were achieved. As for the real-world applications, we deployed the PEDOT/graphene thin film SALDI platform for the analysis of five estrogens in biological samples at microliter-volume level, without tedious sample preparation procedures. Satisfactory recoveries ranging from 60.6% to 99.0% were obtained. The present study suggested that the graphene-embedded PEDOT skeleton with porous morphology would be developed as promising coating for the adsorption of analytes of interest. Additionally, the combination of PEDOT with graphene not only expanded the application fields of PEDOT, but also offered an efficient strategy for preparing homogeneous functional surfaces to realize the quantitative analysis in SALDI method.

Nanomaterials as Assisted Matrix of Laser Desorption/Ionization Time-of-Flight Mass Spectrometry for the Analysis of Small Molecules

Matrix-assisted laser desorption/ionization (MALDI), a soft ionization method, coupling with time-of-flight mass spectrometry (TOF MS) has become an indispensible tool for analyzing macromolecules, such as peptides, proteins, nucleic acids and polymers. However, the application of MALDI for the analysis of small molecules (<700 Da) has become the great challenge because of the interference from the conventional matrix in low mass region. To overcome this drawback, more attention has been paid to explore interference-free methods in the past decade. The technique of applying nanomaterials as matrix of laser desorption/ionization (LDI), also called nanomaterial-assisted laser desorption/ionization (nanomaterial-assisted LDI), has attracted considerable attention in the analysis of low-molecular weight compounds in TOF MS. This review mainly summarized the applications of different types of nanomaterials including carbon-based, metal-based and metal-organic frameworks as assisted matrices for LDI in the analysis of small biological molecules, environmental pollutants and other low-molecular weight compounds.

Surface-assisted laser desorption/ionization time-of-flight mass spectrometry of small drug molecules and high molecular weight synthetic/biological polymers using electrospun composite nanofibers

Polyacrylonitrile/Nafion®/carbon nanotube (PAN/Nafion®/CNT) composite nanofibers were prepared using electrospinning.

Peptidylation for the determination of low-molecular-weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A universal peptide-based derivatization (peptidylation) strategy for the sensitive detection of low-molecular-weight compounds by MALDI-TOF-MS was developed.

Mass spectrometry imaging for the proteomic study of clinical tissue

Over the last decade, MALDI-MS imaging has been used by researchers to explore areas of proteomics, lipidomics and metabolomics in samples of clinical origin for both targeted and global biomarker analysis. Numerous technological advancements in MS and clinical tissue MS imaging have been accomplished; hence, in this article we aim to critically discuss whether MS imaging has now in fact become a true champion of the 'Omics Era'. In order to assess the potential for it to be routinely used in the clinical setting, it is pertinent to discuss some of its limitations, and to examine how these have been addressed by researchers. The key limitations of the technique we will discuss in this viewpoint article are as follows: sample throughput; relevance to patients, the availability of validated/standardised techniques; and integration with conventional pathology and other medical imaging techniques. Good progress has been made over the last 5 years in overcoming these limitations that had previously restricted the use of this technology in the clinical setting.

SU-8 as a material for lab-on-a-chip-based mass spectrometry

This short review focuses on the application of SU-8 for the microchip-based approach to the miniaturization of mass spectrometry. Chip-based mass spectrometry will make the technology commonplace and bring benefits such as lower costs and autonomy. The chip-based miniaturization of mass spectrometry necessitates the use of new materials which are compatible with top-down fabrication involving both planar and non-planar processes. In this context, SU-8 is a very versatile epoxy-based, negative tone resist which is sensitive to ultraviolet radiation, X-rays and electron beam exposure. It has a very wide thickness range, from nanometres to millimetres, enabling the formation of mechanically rigid, very high aspect ratio, vertical, narrow width structures required to form microfluidic slots and channels for laboratory-on-a-chip design. It is also relatively chemically resistant and biologically compatible in terms of the liquid solutions used for mass spectrometry. This review looks at the impact and potential of SU-8 on the different parts of chip-based mass spectrometry - pre-treatment, ionization processes, and ion sorting and detection.

Novel galvanic nanostructures of Ag and Pd for efficient laser desorption/ionization of low molecular weight compounds

A simple approach for synthesis of palladium and silver nanostructures with readily adjustable morphologies was developed using galvanic electrochemical deposition, for application to surface-assisted laser desorption/ionization (SALDI) of small biological molecules. A range of fatty acids, triglycerides, carbohydrates, and antibiotics were investigated to assess the performance of the new materials. Intense analyte cations were generated from the galvanic surfaces upon UV laser irradiation such as potassium adducts for a film thickness <100 nm (originating from impurities of the electrolyte solution) and Pd and Ag cluster ions for films with a thickness >120 nm. Possible laser desorption/ionization mechanisms of these galvanic structures are discussed. The films exhibited self-organizing abilities and adjustable morphologies by changing electrochemical parameters. They did not require any stabilizing agents and were inexpensive and very easy to produce. SALDI analysis showed that the materials were stable under ambient conditions and analytical results with excellent measurement reproducibility and detection sensitivity similar to MALDI were obtained. Finally, we applied the galvanic surfaces to fast screening of natural oils with minimum sample preparation.

A lithium-rich composite metal oxide used as a SALDI-MS matrix for the determination of small biomolecules

A lithium-rich composite metal oxide material used as a SALDI matrix for high throughput analysis of small molecules.