Logic control of enzyme-like gold nanoparticles for selective detection of lead and mercury ions

Development and performance of NLISA for C-reactive protein detection based on Prussian blue nanoparticle conjugates

Prussian blue nanoparticles (PBNPs), also called nanozymes, are very attractive as an alternative to horseradish peroxidase in immunoassay development due to their simple and low-cost synthesis, stability and high catalytic activity. Today, there is a method for highly effective PBNP synthesis based on the reduction of an FeCl3/K3[Fe(CN)6] mixture by hydrogen peroxide. However, there is a lack of research showcasing the use of these highly effective PBNPs for specific target detection in clinical settings, as well as a lack of comprehensive comparisons with conventional methods. To address this gap, we prepared diagnostic reagents based on highly effective PBNPs by modifying them using gelatin and attaching anti-C-reactive protein (CRP) monoclonal antibodies through cross-linking with glutaraldehyde. As a result, a solid-phase colorimetric immunoassay in a sandwich format (nanozyme-linked immunosorbent assay [NLISA]) using highly effective PBNPs as a label for CRP detection has been demonstrated for the first time. The assay demonstrated a detection limit of 21.8 pg/mL, along with acceptable selectivity, precision (CV < 25%) and accuracy (the recovery index was within acceptable limits (75-125%) for LLOQ /ULOQ range. The analytical performance of this method is on par with sensitive assays developed in the last 5 years. Notably, the results obtained from NLISA align with those from an immunofluorescence assay conducted by a certified clinical laboratory. Furthermore, this study underscores the technological challenges involved in constructing an analysis that necessitate further exploration.

Recent advances of Au@Ag core-shell SERS-based biosensors

The methodological advancements in surface-enhanced Raman scattering (SERS) technique with nanoscale materials based on noble metals, Au, Ag, and their bimetallic alloy Au-Ag, has enabled the highly efficient sensing of chemical and biological molecules at very low concentration values. By employing the innovative various type of Au, Ag nanoparticles and especially, high efficiency Au@Ag alloy nanomaterials as substrate in SERS based biosensors have revolutionized the detection of biological components including; proteins, antigens antibodies complex, circulating tumor cells, DNA, and RNA (miRNA), etc. This review is about SERS-based Au/Ag bimetallic biosensors and their Raman enhanced activity by focusing on different factors related to them. The emphasis of this research is to describe the recent developments in this field and conceptual advancements behind them. Furthermore, in this article we apex the understanding of impact by variation in basic features like effects of size, shape varying lengths, thickness of core-shell and their influence of large-scale magnitude and morphology. Moreover, the detailed information about recent biological applications based on these core-shell noble metals, importantly detection of receptor binding domain (RBD) protein of COVID-19 is provided.

Tannic Acid-Capped Gold Nanoparticles as a Novel Nanozyme for Colorimetric Determination of Pb2+ Ions

In this study, tannic acid-modified gold nanoparticles were found to have superior nanozyme activity and catalyze the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide. Enhancing the catalytic activity of the nanozyme by Pb2+ ions caused by selectively binding metal ions by the tannic acid-capped surface of gold nanoparticles makes them an ideal colorimetric probe for Pb2+. The parameters of the reaction, including pH, incubation time, and concentration of components, were optimized to reach maximal sensitivity of Pb2+ detection. The absorption change is directly proportional to the Pb2+ concentration and allows the determination of Pb2+ ions within 10 min. The colorimetric sensor is characterized by a wide linear range from 25 to 500 ng×mL−1 with a low limit of detection of 11.3 ng×mL−1. The highly sensitive and selective Pb2+ detection in tap, drinking, and spring water revealed the feasibility and applicability of the developed colorimetric sensor.

A novel colorimetric sensor for naked-eye detection of cysteine and Hg2+ based on "on-off" strategy using Co/Zn-grafted mesoporous silica nanoparticles

In an attempt to explore the significance of inorganic mimetic enzymes as sensors, this study introduces a naked-eye analytical sensing platform for the detection of L-cysteine (cys), mercury ions (Hg²⁺) based on (turn off/turn-on) catalytic activity of zinc and cobalt grafted mesoporous silica nanoparticles (MSNs). To this end, Zn-MSN and Co/Zn-MSN catalysts were synthesized and characterized using XRD, FT-IR, FESEM, TEM, and nitrogen adsorption-desorption methods. Then, using the intrinsic peroxidase-like activity of as-synthesized samples, the oxidation reactions of the chromogenic substrate (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS)) was designed using H₂O₂, which produced green colored cation radical of ABTS. Considering the high peroxidase-like activity of Co/Zn-MSN in comparison to Zn-MSN, it was employed to detect cys and then Hg²⁺. The results indicated that the strong interaction between cys and Co/Zn-MSN was proved by a limit of detection (LOD) down to 0.24 nM and the linear relationship from 0.8-50 nM (turn off). Given the fact that Hg²⁺ has a high-affinity tendency to combine with cys, we were suggested a novel colorimetric path for sensing of Hg²⁺ in the presence of cys (turn on). Based on this method, LOD was found 0.17 nM with the linear range of 0.57-50 nM. Taken together, results showed that the as-prepared catalysts are superior to other nanoparticles as a sensor to measure the target molecules in biological monitoring and clinical diagnostics.

Nanozymes in Point-of-Care Diagnosis: An Emerging Futuristic Approach for Biosensing

Nanomaterial-based artificial enzymes (or nanozymes) have attracted great attention in the past few years owing to their capability not only to mimic functionality but also to overcome the inherent drawbacks of the natural enzymes. Numerous advantages of nanozymes such as diverse enzyme-mimicking activities, low cost, high stability, robustness, unique surface chemistry, and ease of surface tunability and biocompatibility have allowed their integration in a wide range of biosensing applications. Several metal, metal oxide, metal-organic framework-based nanozymes have been exploited for the development of biosensing systems, which present the potential for point-of-care analysis. To highlight recent progress in the field, in this review, more than 260 research articles are discussed systematically with suitable recent examples, elucidating the role of nanozymes to reinforce, miniaturize, and improve the performance of point-of-care diagnostics addressing the ASSURED (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free and deliverable to the end user) criteria formulated by World Health Organization. The review reveals that many biosensing strategies such as electrochemical, colorimetric, fluorescent, and immunological sensors required to achieve the ASSURED standards can be implemented by using enzyme-mimicking activities of nanomaterials as signal producing components. However, basic system functionality is still lacking. Since the enzyme-mimicking properties of the nanomaterials are dictated by their size, shape, composition, surface charge, surface chemistry as well as external parameters such as pH or temperature, these factors play a crucial role in the design and function of nanozyme-based point-of-care diagnostics. Therefore, it requires a deliberate exertion to integrate various parameters for truly ASSURED solutions to be realized. This review also discusses possible limitations and research gaps to provide readers a brief scenario of the emerging role of nanozymes in state-of-the-art POC diagnosis system development for futuristic biosensing applications.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

A simple and cost-effective paper-based and colorimetric dual-mode detection of arsenic(iii) and lead(ii) based on glucose-functionalized gold nanoparticles

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions. The paper-based detection of As(iii) and Pb(ii) is based on the change in the signal intensity of AuNPs/Glu fabricated on a paper substrate after the deposition of the analyte using a smartphone, followed by processing with the ImageJ software. The colorimetric method is based on the change in the color and the red shift of the localized surface plasmon resonance (LSPR) absorption band of AuNPs/Glu in the region of 200-800 nm. The red shift (Δλ) of the LSPR band observed was from 525 nm to 660 nm for As(iii) and from 525 nm to 670 nm for Pb(ii). The mechanism of dual-mode detection is due to the non-covalent interactions of As(iii) and Pb(ii) ions with glucose molecule present on the surface AuNPs, resulting in the aggregation of novel metal nanoparticles. The calibration curve gave a good linearity range of 20-500 μg L-1 and 20-1000 μg L-1 for the determination of As(iii) and Pb(ii) with the limit of detection of 5.6 μg L-1 and 7.7 μg L-1 for both metal ions, respectively. The possible effects of different metal ions and anions were also investigated but did not cause any significant interference. The employment of AuNPs/Glu is successfully demonstrated for the determination of As(iii) and Pb(ii) using paper-based and colorimetric sensors in environmental water samples.

Photothermometric analysis of bismuth ions using aggregation-induced nanozyme system with a target-triggered surface cleaning effect

The development of nanozyme-based photothermometric sensing for point-of-care testing (POCT) heavy metal ions is of great significance for disease diagnosis and health management. Considering the low catalytic activity of most nanozymes at physiological pH, we found bismuth ions (Bi³⁺) could effectively enhance the peroxidase (POX)-like activity of cetyltrimethylammonium bromide and citrate-capped octahedral gold nanoparticle (CTAB/Cit-AuNP) nanozymes. It is mainly based on Bi³⁺ ions being able to trigger the surface cleaning effect of CTAB/Cit-AuNPs. Because the more active Bi³⁺ ions could effectively bind with citrate on the gold surface and competitively destroy the electrostatic interaction between citrate and CTAB, resulting in the removal of CTAB ligands from the gold surface. Without the ligand protection, CTAB/Cit-AuNPs aggregated immediately, and further resulted in a significant activation of the POX-like activity of AuNP nanozymes. Based on this principle, we introduced the enzyme substrate 3,3',5,5'-tetramethylbenzidine (TMB) into this aggregation-induced nanozyme system, and rationally designed a photothermometric platform to quickly and sensitively detect Bi³⁺ ions by using the good photothermal effect of the oxidation product of TMB (oxTMB). The developed photothermometric method only using a common thermometer has a limit of detection (LOD) as low as 45.7 nM for POCT analysis of Bi³⁺ ions. This study not only provides a more accurate understanding of the aggregation-induced nanozymes based on the surface cleaning principle, but also shows the potential applications of aggregation-induced nanozymes in the POCT field.

Zettomole electrochemical HIV DNA detection using 2D DNA-Au nanowire structure, hemin/G-quadruplex and polymerase chain reaction multi-signal synergistic amplification

Multi-signal synergistically amplified electrochemical sensing of HIV DNA was proposed based on two-dimensional (2D) DNA-Au nanowire structure coupled with hemin/G-quadruplex and polymerase chain reaction (PCR). In the design, by using target HIV DNA as the template, PCR generated numbers of double-stranded DNA (dsDNA) with free single-stranded DNA (ssDNA) tails on one side and free G-quadruplex sequences on the other side. Then, the ssDNA tails of the PCR products were hybridized with the capture probe (CP) to introduce the hemin/G-quadruplex to the electrode surface as a redox-active reporter and to amplify the electrochemical signal as mimic peroxidase catalysis in the presence of H₂O₂. Meanwhile, (+)AuNPs were electrostatically adsorbed onto dsDNA surface for the formation of 2D DNA-Au nanowire structure, amplifying the electrochemical signal further as another mimic peroxidase and electric conductor together. By effectively combining these signal amplification processes, ultrasensitive HIV DNA detection was achieved with a detection limit of 1.3 aM, indicating that it has potential application in clinical diagnosis.

Expanding nanoparticle multifunctionality: size-selected cargo release and multiple logic operations

Physically stimulated nanoparticles that deliver size-selected cargo and function as logic gates are reported. To achieve this goal the particle requires multiple components, and we recognized early on that the components, not just the released cargo, could be used to demonstrate logic operations (OR and AND logic). For stimuli, we chose two non-invasive types, red light and alternating magnetic fields (AMF), because they both have potential biological relevance. To realize cargo delivery with size selection and logic operations, we mechanized the surface of core@shell nanoparticles with a superparamagnetic core that generates localized heating when exposed to an AMF, and a mesoporous silica shell into which cargo molecules with different sizes were loaded. We demonstrate the core@shell nanoparticles can load the dual cargos with different sizes and subsequently release the smaller (∼0.5 nm) and bigger (∼2 nm) cargos in succession when stimulated by a red light followed by an AMF. Finally, we demonstrate that the multi-component nanoparticles could function as nanoparticle-based Boolean logic gates where AMF and red light served as the two inputs and the release of small cargo, and free cyclodextrin served as the outputs. The construction of two Boolean logic gates (OR, and AND) was realized.

Preparation, Functionalization, Modification, and Applications of Nanostructured Gold: A Critical Review

Gold nanoparticles (Au NPs) play a significant role in science and technology because of their unique size, shape, properties and broad range of potential applications. This review focuses on the various approaches employed for the synthesis, modification and functionalization of nanostructured Au. The potential catalytic applications and their enhancement upon modification of Au nanostructures have also been discussed in detail. The present analysis also offers brief summaries of the major Au nanomaterials synthetic procedures, such as hydrothermal, solvothermal, sol-gel, direct oxidation, chemical vapor deposition, sonochemical deposition, electrochemical deposition, microwave and laser pyrolysis. Among the various strategies used for improving the catalytic performance of nanostructured Au, the modification and functionalization of nanostructured Au produced better results. Therefore, various synthesis, modification and functionalization methods employed for better catalytic outcomes of nanostructured Au have been summarized in this review.

A review on metal nanozyme-based sensing of heavy metal ions: Challenges and future perspectives

Large scale mining, manufacturing industries, exploitation of underground water, depletion of groundwater level, and uncontrolled discharge of industrial wastes have caused severe heavy metal ion pollution to the environment throughout the world. Therefore, the rapid detection of such toxic metal ions is inevitable. However, conventional methods require sophisticated instruments and skilled manpower and are difficult to operate in on-field conditions. Recently, metal nanozyme-based assays have been found to have the potential as an alternative to conventional methods due to their portability, simplicity, and high sensitivity to detect metal ion concentration to as low as parts per trillion (ppt). Metal nanozyme-based systems for heavy metal ions enable rapid and cheap screening on the spot with a very simple instrument such as a UV-vis absorption spectrophotometer and therefore, are convenient for use in field operations, especially in remote parts of the world. The sensing mechanism of a nanozyme-based sensor is highly dependent on its surface properties and specific interactions with particular metal ion species. Such method often encounters selectivity issues, unlike natural enzyme-based assays. Therefore, in this review, we mainly focus our discussion on different types of target recognition and inhibition/enhancement mechanisms, and their responses toward the catalytic activity in the sensing of target metal ions, design strategies, challenges, and future perspectives.

Recent advances in semiconducting polymer dots as optical probes for biosensing

This review mainly summarized the recent results that used bright polymer dots (Pdots) for the detection of different analytes such as reactive oxygen species (ROS), metal ions, pH values, and a variety of biomolecules.

The prototypes of nanozyme-based nanorobots

Artificial nanorobot is a type of robots designed for executing complex tasks at nanoscale. The nanorobot system is typically consisted of four systems, including logic control, driving, sensing and functioning. Considering the subtle structure and complex functionality of nanorobot, the manufacture of nanorobots requires designable, controllable and multi-functional nanomaterials. Here, we propose that nanozyme is a promising candidate for fabricating nanorobots due to its unique properties, including flexible designs, controllable enzyme-like activities, and nano-sized physicochemical characters. Nanozymes may participate in one system or even combine several systems of nanorobots. In this review, we summarize the advances on nanozyme-based systems for fabricating nanorobots, and prospect the future directions of nanozyme for constructing nanorobots. We hope that the unique properties of nanozymes will provide novel ideas for designing and fabricating nanorobotics.

Enhancing the peroxidase-like activity and stability of gold nanoparticles by coating a partial iron phosphate shell

Using citrate-capped gold nanoparticles (AuNPs) as peroxidase-mimicking enzymes to design biosensors is hindered by their low catalytic activity and poor colloidal stability, resulting in limited sensitivity and large variations. Herein, the growth of a partial iron phosphate (FeP) shell with Fe²⁺ ions on citrate-capped AuNPs boosted the activity of the AuNPs by up to 20-fold. The FeP-enhanced activity was demonstrated on AuNPs of different sizes, and gold nanostars. When the FeP layer is thick enough to block the access to the Au/FeP interface, the activity was inhibited. Capping the remaining Au surface by thiol also inhibited the activity, suggesting that faster reactions occurred at the interfaces of Au/FeP. Moreover, a FeP shell can stabilize AuNPs against freezing and a high NaCl concentration of 1 M. Sensitive detection of Fe²⁺ was achieved with a detection limit of 0.41 μM, while no other tested transition metal phosphates enhanced the peroxidase-like activity of AuNPs.

Resorufin-based responsive probes for fluorescence and colorimetric analysis

The fluorescence imaging technique has attracted increasing attention in the detection of various biological molecules in situ and in real-time owing to its inherent advantages including high selectivity and sensitivity, outstanding spatiotemporal resolution and fast feedback. In the past few decades, a number of fluorescent probes have been developed for bioassays and imaging by exploiting different fluorophores. Among various fluorophores, resorufin exhibits a high fluorescence quantum yield, long excitation/emission wavelength and pronounced ability in both fluorescence and colorimetric analysis. This fluorophore has been widely utilized in the design of responsive probes specific for various bioactive species. In this review, we summarize the advances in the development of resorufin-based fluorescent probes for detecting various analytes, such as cations, anions, reactive (redox-active) sulfur species, small molecules and biological macromolecules. The chemical structures of probes, response mechanisms, detection limits and practical applications are investigated, which is followed by the discussion of recent challenges and future research perspectives. This review article is expected to promote the further development of resorufin-based responsive fluorescent probes and their biological applications.

Recent advances in the construction of nanozyme-based logic gates

Nanozymes, nanomaterials with enzyme-like activity, have been considered as promising alternatives of natural enzymes. Molecular logic gates, which can simulate the function of the basic unit of an electronic computer, perform Boolean logic operation in response to chemical, biological, or optical signals. Recently, the combination of nanozymes and logic gates enabled bioinformation processing in a logically controllable way. In the review, recent progress in the construction of nanozyme-based logic gates integrated with their utility in sensing is introduced. Furthermore, the issues and challenges in the construction processes are discussed. It is expected the review will facilitate a comprehensive understanding of nanozyme-based logic systems.

Designing signal-on sensors by regulating nanozyme activity

Nanozymes are nanomaterials with enzyme-like activities. Compared to natural enzymes, nanozymes are more stable and cost-effective, and they have unique properties due to their nanoscale size and surface chemistry. In this review, we summarize 'signal-on' nanozyme-based sensors for detecting metal ions, anions, small molecules and proteins. Since protein-based enzymes are already highly active, they were used to detect their inhibitors, resulting in 'signal-off' sensors. On the other hand, for nanozymes, target molecules were detected either as a promotor of nanozyme activity or for its ability to selectively remove nanozyme inhibitors. In both cases, 'signal-on' detection was achieved. We classify the commonly used nanozymes based on their composition such as metal oxide, gold nanoparticles and other nanomaterials, most of which belong to the oxidase, peroxidase and catalase mimics. The nanozymes can catalyze the oxidation of colorless or non-fluorescent substrates to produce a visual or fluorescent signal. Based on this, this article presents some typical 'turn-on' and 'turn-off-on' sensors, and we critically review their design principles. At the end, further perspectives for the nanozyme-based sensors are outlined.

Gold nanozyme as an excellent co-catalyst for enhancing the performance of a colorimetric and photothermal bioassay

Advanced oxidation processes (AOPs) have recently proposed for advancing colorimetric sensing applications, owing to their excellent performance of sensitive color readout that generated from the oxidation of chromogenic substrates like 3,3',5,5'-tetramethylbenzidine (TMB) by reactive oxygen species (ROS) of AOPs such as ·OH and ·O₂^- radicals. However, the efficiency of ROS generation and the related H₂O₂ decomposition in most AOPs is quite low especially at neutral pH, which greatly hampered the practical sensing applications of the AOPs. We herein communicated that β-cyclodextrin (β-CD)-capped gold nanoparticles (β-CD@AuNPs) can promote catalysis at neutral pH for AOP as an excellent co-catalyst. In this strategy, inorganic pyrophosphate (PPi) ions was first used to coordinate with Cu²⁺ and form Cu²⁺-PPi complex. In the presence of hydrogen peroxide, target inorganic pyrophosphatase (PPase) can hydrolyze PPi into inorganic phosphate (Pi) and release free Cu²⁺ simultaneously, resulting in a Cu²⁺-triggered Fenton-like AOP reaction. The introduced β-CD@AuNPs acts as a co-catalyst, analogous to mediators in the most co-catalyzed system, to enhance the rate-limiting step of Cu²⁺/Cu⁺ conversion in Cu²⁺/H₂O₂ Fenton-like AOP and resulting in an efficient generation of ·OH and ·O₂^- radicals, which further producing an intense blue color by oxidizing TMB into its oxidation product (TMBox) within a short time. Finally, this reaction system was used to simply detecting target PPase with the colorimetric and photothermal readout based on the in-situ generated TMBox indicator. More significantly, we successfully demonstrated nanozyme can serve as a co-catalyst to promote the AOP catalysis at neutral pH, and inspire other strategies to overcome the pH limitation in the AOP catalysis and expand its colorimetric and photothermometric application.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic

We report the first use of metallic nanozyme as colorimetric probe for Pb²⁺ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb²⁺ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ faded gradually. A determination limit of 3.0 nM Pb²⁺ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb²⁺ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

Surface chemistry of gold nanoparticles for health-related applications

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications. Health-related applications of gold nanoparticles rely on the physical and chemical reactions between molecules and gold nanoparticles. Surface chemistry can precisely control and tailor the surface properties of gold nanoparticles to meet the needs of applications. Gold nanoparticles have unique physical and chemical properties, and have been used in a broad range of applications from prophylaxis to diagnosis and treatment. The surface chemistry of gold nanoparticles plays a crucial role in all of these applications. This minireview summarizes these applications from the perspective of surface chemistry and explores how surface chemistry improves and imparts new properties to gold nanoparticles for these applications.

Electrochemical immunosensor based on Ag+-dependent CTAB-AuNPs for ultrasensitive detection of sulfamethazine

An electrochemical biosensor was proposed utilizing an improved amplification strategy for the rapid detection of sulfamethazine (as a model target) in aquatic environments. In this competitive immunoassay, cetyltrimethylammonium bromide-capped gold nanoparticles (CTAB-AuNPs) were used as a signal amplifier and electrode matrix and coated with an antigen-antibody (Cag-Ab₁) specific binding system as a recognition unit for the target compound. In addition, silver nanoparticle labels were functionalized with dendritic fibrous nanosilica (DFNS@AgNPs) and decorated onto chitosan/single walled carbon nanohorn (CS/SWCNH)-modified glass carbon electrodes (GCEs), which improved the electron transfer rate and increased the surface area, enabling more coating antigens to be captured. Under acidic conditions, massive amounts of the Ag⁺ bound to the surface of the AuNPs dissolved, and consequently, formed Ag⁺@CTAB-AuNP complexes, which resulted in a distinctly improved peroxidase-like activity and enhanced current response. Furthermore, the destroyed Ab₁-Ab₂-DFNS conjugation greatly decreased the impedance, bringing about the amplification of the electrochemical signals. After optimization of the parameters, the proposed approach exhibited excellent performance, including good sensitivity (LOD, 0.0655 ng/mL) and satisfactory accuracy (recoveries, 79.02%-118.39%; CV, 3.18%-9.82%), which indicates the great potential of this strategy for the rapid detection of trace pollutants in the environments.

Progress in rapid optical assays for heavy metal ions based on the use of nanoparticles and receptor molecules

This review (with 230 refs.) covers recent progress in rapid optical assays for heavy metals (primarily lead and mercury as the most relevant) based on the use of nanoparticles and receptor molecules. An introduction surveys the importance, regulatory demands (such as maximum permissible concentrations) and potential and limitations of various existing methods. This is followed by a general discussion on the use of nanoparticles in optical assays of heavy metals (including properties, basic mechanisms of signal generation). The next sections cover methods for the functionalization of nanoparticles with (a) sulfur-containing compounds (used for modification of nanoparticles or added to the reaction medium), (b) nitrogen-containing compounds (such as amino acids, polypeptides, and heterocyclic molecules), and (c) oxygen-containing species (such as hydroxy and carbonyl compounds). This is continued by a specific description of specific assays based on the use of aptamers as receptors, on the use of deoxyribozymes as synthetic reaction catalysts, of G-quadruplex aptamers, of aptamers in logic gate-type of assays of linear (unstructured) aptamers ("hairpins"), and on the use of aptamers in lateral flow assays. A next section covers assays based on the employment of antibodies as receptors (used in the immunoassay development). The properties of various nanoparticles and their applicability in optical assays are also discussed in some detail. Final sections discuss the selectivity of assays, potential interferences by other cations, methods for their elimination, and also matrix effects and approaches for sample pretreatment. A concluding section discusses current challenges and future trends. Analysis based on enzyme inhibition assay is not treated here but enzyme-like action of some receptor molecules such as DNAzymes is discussed. Graphical abstract Schematic presentation of main principles of application of various nanoparticles with receptor molecules (S-, N-, O-containing, heterocyclic compounds, proteins, antibody, aptamers) for heavy metals ions detection. The included methods cover optical assays with description of mechanisms of interactions and signal generation.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Label-Free Colorimetric Detection of Mercury (II) Ions Based on Gold Nanocatalysis

Herein, a label-free colorimetric nanosensor for Hg(II) is developed utilizing the hindering effect of Hg(II) on the kinetic aspect of gold nanoparticle (AuNPs) growth on the surface of gold nanostars (AuNSs). H-AuNS probes are synthesized and modified by 2-[4-(2-hydroxyethel) piperazine-1-yl] ethanesulfonic acid (HEPES). After the formulation of the reagents and testing conditions are optimized, HEPES-capped AuNSs (H-AuNSs) demonstrates good selectivity and sensitivity towards Hg(II) determination. A H-AuNS probe, in the presence of HCl/Au(III)/H₂O₂, is capable of detecting a Hg(II) concentration range of 1.0 nM⁻100 µM, with a detection limit of 0.7 nM, at a signal-to-noise ratio of 3.0, and a visual detection limit of 10 nM with naked eyes. For practicality, the H-AuNS probe is evaluated by measuring Hg(II) in the environmental water matrices (lake water and seawater) by a standard addition and recovery study. The detection limits for environmental samples are found to be higher than the lab samples, but they are still within the maximum allowable Hg concentration in drinking water (10 nM) set by the US Environmental Protection Agency (EPA). To create a unique nanosensor, the competitive interaction between Hg(II) and Pt(IV) toward the H-AuNSs probe is developed into a logic gate, improving the specificity in the detection of Hg(II) ions in water samples.

Ag+ -Gated Surface Chemistry of Gold Nanoparticles and Colorimetric Detection of Acetylcholinesterase

Chemical regulation of enzyme-mimic activity of nanomaterials is challenging because it requires a precise understanding of the surface chemistry and mechanism, and rationally designed applications. Herein, Ag+ -gated peroxidase activity is demonstrated by successfully modulating surface chemistry of cetyltrimethylammonium bromide-capped gold nanoparticles (CTAB-AuNPs). A surface blocking effect of long-chain molecules on surfaces of AuNPs that inhibit peroxidase activity of AuNPs is found. Ag+ ions can selectively bind on the surfaces of AuNPs and competitively destroy CTAB membrane forming Ag+ @CTAB-AuNPs complexes to result in enhanced peroxidase activity. Ag+ @CTAB-AuNPs show the highest peroxidase activity compared to similar-sized citrate-capped and ascorbic acid-capped AuNPs. Ag+ @CTAB-AuNPs can potentially develop into analyte-responsive systems and exhibit advantages in the optical sensing field. For example, the Ag+ @CTAB-AuNPs system shows an enhanced sensitivity and selectivity for acetylcholinesterase activity sensing compared to other methods.

Switching Peroxidase-Mimic Activity of Protein Stabilized Platinum Nanozymes by Sulfide Ions: Substrate Dependence, Mechanism, and Detection

In the present work, we use β-casein as a model protein to prepare a smart β-casein stabilized Pt nanoparticle (CM-PtNP) with peroxidase mimicking activity and systematically investigate sulfide-mediated switching effect and mechanism of CM-PtNP nanozyme's activity. Sulfide-mediated activity switching effect depends heavily on the physicochemical properties of nanozymes and the identity of substrate. On one hand, the binding of sulfide to a Pt nanozyme surface leads to the transform from Pt²⁺ to Pt⁰, resulting in more active sites and the activity "switching on"; on the other hand, the binding of sulfide ions via Pt-S interaction blocks the active sites, resulting in the activity "switching off". For substrates 3,3',5,5'-tetramethylbenzidine and 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt, the two factors play different decisive roles since the interaction of substrate molecules with nanozyme allows their different distributions on nanozyme surfaces. By virtue of this specific response, excellent sulfide colorimetric sensors with different limits of detection were developed based on CM-PtNP with different substrates. This is the first report about a fundamental understanding of how substrates influence the anion-mediated activity switching effect by illuminating the nature of anion-nanozyme interaction and nanozyme-substrate interaction. This may be useful to rationally predict the environment factors on the activities of the nanozyme and to design an effective signal amplification based on target-induced nanozyme deactivation/activation.

Peroxidase-like activity of nanocrystalline cobalt selenide and its application for uric acid detection

Dendrite-like cobalt selenide nanostructures were synthesized from cobalt and selenium powder precursors by a solvothermal method in anhydrous ethylenediamine. The as-prepared nanocrystalline cobalt selenide was found to possess peroxidase-like activity that could catalyze the reaction of peroxidase substrates in the presence of H₂O₂. A spectrophotometric method for uric acid (UA) determination was developed based on the nanocrystalline cobalt selenide-catalyzed coupling reaction between N-ethyl-N-(3-sulfopropyl)-3-methylaniline sodium salt and 4-aminoantipyrine (4-AAP) in the presence of H₂O₂. Under optimum conditions, the absorbance was proportional to the concentration of UA over the range of 2.0-40 μM with a detection limit of 0.5 μM. The applicability of the proposed method has been validated by determination of UA in human serum samples with satisfactory results.

Bimetallic Bi/Pt peroxidase mimic and its bioanalytical applications

In this work, bimetallic Bi/Pt nanoparticles in bovine serum albumin biomolecular scaffold (BSA-Bi/PtNPs) were synthesized through a facile and green method. As compared with BSA-PtNPs, the BSA-Bi/PtNPs possess enhanced peroxidase-like catalytic activity. Moreover, the BSA-Bi/PtNPs are stable in harsh conditions such as high temperature, extreme pH environments, and high ionic strength, as well as in common biological matrixes. These prominent advantages enable the BSA-Bi/PtNPs to be applied to a wide range of fields. Bioassays, such as serum glucose detection, extracellular hydrogen peroxide (H₂O₂) monitor, and cancer cells labeling, have been realized with satisfying results. The linear range of glucose determination was from 1 to 100 μM and the limit of detection (LOD) was 0.2 μM. The H₂O₂ released from each MCF-7 cell after stimulation was calculated to be 2.66 × 10^-16 mol/s. By utilizing folic acid as a recognition element, tumor cell could be readily distinguished by BSA-Bi/PtNPs and the LOD for MCF-7 cell detection was 90 cells.

A Simple Paper-Based Colorimetric Device for Rapid Mercury(II) Assay

Contamination of the environment by mercury(II) ions (Hg(2+)) poses a serious threat to human health and ecosystems. Up to now, many reported Hg(2+) sensors require complex procedures, long measurement times and sophisticated instrumentation. We have developed a simple, rapid, low cost and naked-eye quantitative method for Hg(2+) environmental analysis using a paper-based colorimetric device (PCD). The sample solution to which platinum nanoparticles (PtNPs) have been added is dispensed to the detection zone on the PCD, where the 3,3,5,5-tetramethylbenzidine (TMB) substrate has been pre-loaded. The PtNPs effect a rapid oxidization of TMB, inducing blue colorization on the PCD. However, Hg(2+) in the solution rapidly interact with the PtNPs, suppressing the oxidation capacity and hence causing a decrease in blue intensity, which can be observed directly by the naked eye. Moreover, Hg(2+) at concentrations as low as 0.01 uM, can be successfully monitored using a fiber optic device, which gives a digital readout proportional to the intensity of the blue color change. This paper-based colorimetric device (PCD) shows great potential for field measurement of Hg(2+).