2D Photonic Crystal Protein Hydrogel Coulometer for Sensing Serum Albumin Ligand Binding

Iron protoporphyrin IX-hyaluronan hydrogel-supported luminol chemiluminescence for the detection of nitric oxide in physiological solutions

Due to its role as a free radical signal-transducing agent with a short lifespan, precise measurement of nitric oxide (●NO) levels presents significant challenges. Various analytical techniques offer distinct advantages and disadvantages for ●NO detection. This research aims to simplify the detection process by developing a hydrogel system using iron(III)-protoporphyrin IX (hemin)-loaded hyaluronan for the detection of ●NO in solution. Various hydrogel formulations were created, and the effects of their components on hydrogel-supported luminol chemiluminescence (CL) kinetics, radical scavenging, and physicochemical properties were analysed through factorial analysis. The candidate formulations were then evaluated using two ●NO donors. An increase in the degree of crosslinking in unloaded formulations enhanced interactions with the CL reaction components, hydrogen peroxide (H2O2) and luminol, thereby affecting light generation. However, hemin loading negated these effects, resulting in more prominent luminescence kinetics in formulations with lower crosslinking degrees. Similarly, ●NO influenced the kinetics differently, interacting with both the CL reaction and hydrogel components. Hemin-loaded formulations exhibited enhanced signal propagation when exposed to ●NO, followed by H2O2 and luminol, whereas reversing the order of addition inhibited this propagation. The magnitude of these luminescence changes depended on the type and concentration of the ●NO donor, demonstrating greater sensitivity to ●NO levels compared to amperometric sensing. These findings suggest that the studied hydrogel platform has potential for the facile and accurate detection of ●NO in solution, requiring minimal sample sizes.

Hydrogels for Chemical Sensing and Biosensing

The development and synthesis of hydrogels for chemical and biosensing are of great value. Hydrogels can be tailored to its own physical structure, chemical properties, biocompatibility, and sensitivity to external stimuli when being used in a specific environment. Herein, hydrogels and their applications in chemical and biosensing are mainly covered. In particular, it is focused on the manner in which hydrogels serve as sensing materials to a specific analyte. Different types of responsive hydrogels are hence introduced and summarized. Researchers can modify different chemical groups on the skeleton of the hydrogels, which make them as good chemical and biosensing materials. Hydrogels have great application potential for chemical and biosensing in the biomedical field and some emerging fields, such as wearable devices.

Detection of Biomarkers through Functionalized Polymers

Over the past decade, there has been a rising interest in utilizing functionalized porous polymers for sensor applications. By incorporating functional groups into nanostructured materials like hydrogels, nanosheets, and nanopores, exciting new opportunities have emerged for biomarker detection. The ability of functionalized polymers to undergo physical changes and deformations makes them perfect for modulating optical signals. This chemical mechanism enables the creation of biocompatible sensors for in situ biomarker measurement. Here a comprehensive overview of the current publication trends is provided in functionalized polymers, encompassing functional groups that can induce measurable physical deformations. It explores various materials categorized based on their detection targets, which include proteins, carbohydrates, ions, and deoxyribonucleic acid. As such, this work serves as a valuable reference for the development of functionalized polymer-based sensors.

Ultra-sensitive pressure sensing capabilities of defective one-dimensional photonic crystal

Present research work deals with the extremely sensitive pressure-sensing capabilities of defective one-dimensional photonic crystal structure (GaP/SiO2)N/Al2O3/(GaP/SiO2)N. The proposed structure is realized by putting a defective layer of material Al2O3 in the middle of a structure consisting of alternating layers of GaP and SiO2. The transfer matrix method has been employed to examine the transmission characteristics of the proposed defective one-dimensional photonic crystal in addition to MATLAB software. An external application of the hydrostatic pressure on the proposed structure is responsible for the change in the position and intensity of defect mode inside the photonic band gap of the structure due to pressure-dependent refractive index properties of the materials being used in the design of the sructure. Additionally, the dependence of the transmission properties of the structure on other parameters like incident angle and defect layer thickness has also studied. The theoretical obtained numeric values of the quality factor and sensitivity are 17,870 and 72 nm/GPa respectively. These results are enough to support our claim that the present design can be used as an ultra-sensitive pressure sensor.

Artificial Skin with Patterned Stripes for Color Camouflage and Thermoregulation

Chameleons are famous for their quick color changing abilities, and it is commonly assumed that they do this for camouflage. However, recent reports revealed that chameleons also change color for body temperature regulation. Inspired by the structure of the panther chameleon's skin, a stripe-patterned poly(N-isopropylacrylamide) (PNIPAM) and polyacrylamide (PAM) hydrogel film with a laminated structure is fabricated in this work; thus, both camouflage and thermoregulation can be achieved through controlling Vis and NIR light effectively. For the PNIPAM stripe, the upper layer is the native PNIPAM hydrogel and the lower layer is the carbon nanotube-composited PNIPAM hydrogel. Thus, the PNIPAM stripe is capable of reaching 28 °C at a low environmental temperature (12 °C) and a low radiation intensity (20 mW cm-2), while preventing the body temperature from rising by changing to white under a strong radiation intensity (100 mW cm-2). For the PAM stripe, the upper layer combines colloidal photonic crystals and displays a tunable structural color by stretching, and the lower layer is mixed with PNIPAM microgels for thermal regulation. Through the fabrication of multifunctional patterns, the film can achieve both dynamic structural color and thermoregulation by precisely controlling solar radiation absorption, scattering, and reflection. More importantly, in the stripe-patterned system, the shrinkage of the PNIPAM stripes can effectively trigger the elongation of the PAM stripe, which endows the structural color changing process to be self-powered completely. The performances show that the stripe-patterned film may have potential applications in intelligent coatings, especially in areas with large temperature differences during the day such as high plains.

Novel self-healing and recyclable fire-retardant polyvinyl alcohol/borax hydrogel coatings for the fire safety of rigid polyurethane foam

Rigid polyurethane foam (RPUF) has attracted great attention as an insulation material, but its inherent flammability restricts its practical application. Developing a sustainable fire-retardant strategy that can improve its fire safety is particularly desirable and challenging. Herein, novel fire-retardant hydrogel coatings based on polyvinyl alcohol (PVA) and borax are proposed and applied in RPUF, and the self-healing, recyclability and flame retardant properties of the coatings are investigated. The dynamic and reversible cross-linked networks based on the borate ester bonds and hydrogen bonds endow the hydrogels with excellent repairability, recyclability, and elasticity. Compared with a neat RUPF, the coated RPUF exhibited improved fire-retardant properties without the inherent advantages being influenced and can be reflected by the 8% increase in the limiting oxygen index (LOI), 20% reduction in total heat release (THR), and 25% decrease in total smoke production (TSP) with the coatings, along with a rapid self-quenching behavior. The novel hydrogel coatings provide a new strategy for the development of flame-retardant coatings, demonstrating the potential of the next generation of self-healing hydrogel coatings to reduce the fire risk of the RPUF.

Research progress on albumin-based hydrogels: Properties, preparation methods, types and its application for antitumor-drug delivery and tissue engineering

Albumin is derived from blood plasma and is the most abundant protein in blood plasma, which has good mechanical properties, biocompatibility and degradability, so albumin is an ideal biomaterial for biomedical applications, and drug-carriers based on albumin can better reduce the cytotoxicity of drug. Currently, there are numerous reviews summarizing the research progress on drug-loaded albumin molecules or nanoparticles. In comparison, the study of albumin-based hydrogels is a relatively small area of research, and few articles have systematically summarized the research progress of albumin-based hydrogels, especially for drug delivery and tissue engineering. Thus, this review summarizes the functional features and preparation methods of albumin-based hydrogels, different types of albumin-based hydrogels and their applications in antitumor drugs, tissue regeneration engineering, etc. Also, potential directions for future research on albumin-based hydrogels are discussed.

Aptamer-functionalized 2D photonic crystal hydrogels for detection of adenosine

Aptamer-functionalized two-dimensional photonic crystal (2DPC) hydrogels are reported for the detection of adenosine (AD). As a molecular recognition group, an AD-binding aptamer was covalently attached to 2DPC hydrogels. This aptamer selectively and sensitively binds AD, changing the conformation of the aptamer from a long single-stranded structure (AD-free conformation) to a short hairpin loop structure (AD-bound conformation). The AD-binding-induced changes of aptamer conformation reduced the volume of the 2DPC hydrogels and decreased the interparticle spacing of the 2DPC embedded in the hydrogel network. The particle spacing changes being dependent on AD concentration were determined by measuring 2DPC light diffraction using a simple laser pointer. The 2DPC hydrogel sensor showed a large particle spacing decrease of ~ 110 nm in response to 1 mM AD in phosphate-buffered saline (PBS). The linear range of determination of AD was 0.1 nM to 1 mM and the limit of detection was 0.09 nM. The hydrogel sensor response for real samples was then validated in diluted fetal bovine serum (FBS) and human urine. The average % difference in particle spacing changes measured between diluted FBS and pure PBS was only 3.99%. In diluted human urine, the recoveries for the detection of AD were 95-101% and the relative standard deviations were 4.9-7.8%. The results demonstrate the potential applicability of the hydrogel sensor for real samples. This sensing concept, using the aptamer-functionalized 2DPC hydrogels, allows for a simple, sensitive, selective, and reversible detection of AD. It may enable sensor development for a wide variety of analytes by simply changing the aptamer recognition group.

Multi-Factors Cooperatively Actuated Photonic Hydrogel Aptasensors for Facile, Label-Free and Colorimetric Detection of Lysozyme

Responsive two-dimensional photonic crystal (2DPC) hydrogels have been widely used as smart sensing materials for constructing various optical sensors to accurately detect different target analytes. Herein, we report photonic hydrogel aptasensors based on aptamer-functionalized 2DPC poly(acrylamide-acrylic acid-N-tert-butyl acrylamide) hydrogels for facile, label-free and colorimetric detection of lysozyme in human serum. The constructed photonic hydrogel aptasensors undergo shrinkage upon exposure to lysozyme solution through multi-factors cooperative actuation. Here, the specific binding between the aptamer and lysozyme, and the simultaneous interactions between carboxyl anions and N-tert-butyl groups with lysozyme, increase the cross-linking density of the hydrogel, leading to its shrinkage. The aptasensors’ shrinkage decreases the particle spacing of the 2DPC embedded in the hydrogel network. It can be simply monitored by measuring the Debye diffraction ring of the photonic hydrogel aptasensors using a laser pointer and a ruler without needing sophisticated apparatus. The significant shrinkage of the aptasensors can be observed by the naked eye via the hydrogel size and color change. The aptasensors show good sensitivity with a limit of detection of 1.8 nM, high selectivity and anti-interference for the detection of lysozyme. The photonic hydrogel aptasensors have been successfully used to accurately determine the concentration of lysozyme in human serum. Therefore, novel photonic hydrogel aptasensors can be constructed by designing functional monomers and aptamers that can specifically bind target analytes.

DNA-Crosslinked 2D Photonic Crystal Hydrogels for Detection of Adenosine Actuated by an Adenosine-Binding Aptamer

There is a need to develop versatile sensing motifs that can be used to detect a variety of chemical targets in resource-limited settings, for example, at the point of care. While numerous sensing technologies have been developed toward this effort, these technologies can be overly complex and require a skilled technician, extensive sample preparation, or sophisticated instrumentation to use, limiting their generalizability and application in resource-limited settings. Here, we report a novel sensing motif that utilizes DNA-crosslinked two-dimensional photonic crystal (2DPC) hydrogels. These hydrogel sensors contain a DNA aptamer recognition group that binds a target analyte. As proof of concept, we fabricated 2DPC hydrogels using a well-studied adenosine-binding aptamer. This adenosine aptamer is duplexed with a partially complementary strand and forms responsive crosslinks in the hydrogel polymer network. When adenosine is introduced, aptamer-adenosine binding occurs, breaking the DNA crosslinks and causing the hydrogel to swell. This in turn increases the particle spacing of an embedded 2DPC array, shifting the 2DPC Bragg diffraction. Thus, adenosine concentration can be monitored through 2DPC Bragg diffraction measurements. A linear range of 20 μM to 2 mM was observed. The detection limits were calculated to be 13.9 μM in adenosine-binding buffer and 26.7 μM in fetal bovine serum. This reported sensing motif has a readout that is simple and rapid and requires minimal equipment. We hypothesize that this sensing motif is generalizable and that other sensors can be easily fabricated by simply exchanging the aptamer that serves as a molecular recognition group.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Two dimensional photonic crystal angle sensor design

We present a novel design for an angle sensor based on photon coupling to internal optical modes of a two dimensional photonic crystal. We show in simulation that an implementation of this design could achieve sensitivities as high as 1.61 × 10⁶ V/rad, which in principle allows for angle measurements with a noise floor of 2.98 × 10^-14 rad$/\sqrt{\textrm{Hz}}$ at the photodiode noise equivalent power. We discuss the limitations of this design and predict the impact these limitations have on the sensitivity as well as the possible ways to further increase the devices sensitivity. As a proof of concept, we demonstrate experimentally a photonic crystal with an angle sensitive mode.

Biomimetic design of photonic materials for biomedical applications

Photonic crystal (PC) materials with bio-inspired structure colors have drawn increasing attention as their potentials have been rapidly progressed in the field of biomedicine. After elaborate integration with smart materials or preparations through advanced techniques, PC materials have shown significant advantages in biosensing, bio-probing, bio-screening, tissue engineering, and so forth. In this review, we first introduced the fundamentals of PC materials as well as their fabrication strategies with different dimensional outputs. Based on these diversified PC materials, their biomedical potentials as biosensing elements, cell carriers, drug delivery systems, screening methods, cell scaffolds for tissue engineering, cell imaging probes, as well as the monitoring means for biological processes were then highlighted. In addition to these, we finally listed and discussed some emerging applications of PCs integrated with functional materials and newly developed material engineering technologies. In short, this review will provide a panoramic view of PCs-based biomedicines, and moreover, the progressive discussions from fundamentals to advanced applications in this review may also encourage researchers to innovate PC materials or devices for broader biomedical applications.

A responsive photonic crystal film sensor for the ultrasensitive detection of uranyl ions

As an effective nuclear energy resource, uranium plays an important role in industry and energy but the wastes of uranium also cause radioactive contamination, which is harmful to the environment and the human body. Herein, a responsive photonic crystal (PC) film sensor for the ultrasensitive and label-free detection of uranyl ions (UO₂²⁺) has been proposed, which is easy to construct and does not need to be combined with a hydrogel. The PC film is not pH-sensitive because it is obtained by the self-assembly of methyl methacrylate-acrylonitrile co-polymeric nanospheres (PMMA-AN). These nanospheres were modified with amidoxime groups, which have a good coordination ability with UO₂²⁺. The bindings between nanospheres and UO₂²⁺ change the refractive index and disturb the face-centered cubic structure of the film, which leads to a decrease in the diffraction peak intensity of the PC film. The sensor works in the concentration range of 10 pM to 100 μM for UO₂²⁺ determination and the decreased intensities of the diffraction peaks are linearly correlated with the logarithm of UO₂²⁺ concentration in the range from 1 nM to 100 μM. Moreover, the sensor shows good selectivity for UO₂²⁺ and can also perform the determination of UO₂²⁺ in a real sample. The responsive PC film sensor shows great potential in the label-free and ultrasensitive detection of UO₂²⁺.

Detection and sensing of hemoglobin using one-dimensional binary photonic crystals comprising a defect layer

Believing that the detection of hemoglobin possesses a vital role in the discovery of many diseases, we present in this work a simple method for sensing and detecting hemoglobin based on one-dimensional photonic crystals. Implementing hemoglobin as a defect layer inside the proposed photonic crystal results in a resonant peak evolving within the bandgaps. The strong dependence of these resonant peaks on concentration and the consequent refractive index are the essential bases of the detection process. The role played by these parameters together with the angle of incidence on performance and efficiency of our sensor is demonstrated. In the vicinity of the investigated results, we demonstrate the values of sensitivity, figure of merit (FOM), signal-to-noise ratio (SNR), and resolution to optimize the performance of our sensor. The numerical results show a significant effect of polarization mode on performance of this sensor. For TE polarization with an angle of incidence equal to 45°, we investigated sensitivity of 167nmRIU^-1, SNR of 0.23, FOM of 0.63RIU^-1, and resolution of 257 nm.

Stimuli-Responsive Pure Protein Organogel Sensors and Biocatalytic Materials

Utilizing protein chemistry in organic solvents has important biotechnology applications. Typically, organic solvents negatively impact protein structure and function. Immobilizing proteins via cross-links to a support matrix or to other proteins is a common strategy to preserve the native protein function. Recently, we developed methods to fabricate macroscopic responsive pure protein hydrogels by lightly cross-linking the proteins with glutaraldehyde for chemical sensing and enzymatic catalysis applications. The water in the resulting protein hydrogel can be exchanged for organic solvents. The resulting organogel contains pure organic solvents as their mobile phases. The organogel proteins retain much of their native protein function, i.e., protein-ligand binding and enzymatic activity. A stepwise ethylene glycol (EG) solvent exchange was performed to transform these hydrogels into organogels with a very low vapor pressure mobile phase. These responsive organogels are not limited by solvent/mobile phase evaporation. The solvent exchange to pure EG is accompanied by a volume phase transition (VPT) that decreases the organogel volume compared to that of the hydrogel. Our organogel sensor systems utilize shifts in the particle spacing of an attached two-dimensional photonic crystal (2DPC) to report on the volume changes induced by protein-ligand binding. Our 2DPC bovine serum albumin (BSA) organogels exhibit VPT that swell the organogels in response to the BSA binding of charged ligands like ibuprofen and fatty acids. To our knowledge, this is the first report of a pure protein organogel VPT induced by protein-ligand binding. Catalytic protein organogels were also fabricated that utilize the enzyme organophosphorus hydrolase (OPH) to hydrolyze toxic organophosphate (OP) nerve agents. Our OPH organogels retain significant enzymatic activity. The OPH organogel rate of OP hydrolysis is ∼160 times higher than that of un-cross-linked OPH monomers in a 1:1 ethylene glycol/water mixture.

One-dimensional defective photonic crystals for the sensing and detection of protein

The sensing of protein is of great importance because of its prominent role in building and repairing tissues. In this work, we present a simple design for the detection and sensing of protein using one-dimensional defective photonic crystals. The main idea of our work is included in the theoretical investigation of the transmittance properties of the resonant mode produced inside the photonic band gap. Our study uses the characteristic matrix method and curve fitting. The main reason for our study is to detect the concentration of a protein solution using an efficient, accurate, and simple method. Here, the defect layer is filled with a protein solution. Our idea depends on two hypotheses, and the first one is based on the appearance of a resonant peak on the photonic band gap. The second one depends on a change in the position of this resonant peak with the concentration of the protein solution. The effect of many parameters on the performance of our sensor, such as the thickness of the defect layer and the sensitivity, is demonstrated. The numerical results could present a simple way to design an accurate, stable, efficient, and low-cost protein sensor compared to other current methods and techniques.

Chameleon-Inspired Strain-Accommodating Smart Skin

Stimuli-responsive color-changing hydrogels, commonly colored using embedded photonic crystals (PCs), have potential applications ranging from chemical sensing to camouflage and anti-counterfeiting. A major limitation in these PC hydrogels is that they require significant deformation (>20%) in order to change the PC lattice constant and generate an observable chromatic shift (∼100 nm). By analyzing the mechanism of how chameleon skin changes color, we developed a strain-accommodating smart skin (SASS), which maintains near-constant size during chromatic shifting. SASS is composed of two types of hydrogels: a stimuli-responsive, PC-containing hydrogel that is patterned within a second hydrogel with robust mechanical properties, which permits strain accommodation. In contrast to conventional "accordion"-type PC responsive hydrogels, SASS maintains near-constant volume during chromatic shifting. Importantly, SASS materials are stretchable (strain ∼150%), amenable to patterning, spectrally tunable, and responsive to both heat and natural sunlight. We demonstrate examples of using SASS for biomimicry. Our strategy, to embed responsive materials within a mechanically matched scaffolding polymer, provides a general framework to guide the future design of artificial smart skins.

Ultrathin Photonic Polymer Gel Films Templated by Non-Close-Packed Monolayer Colloidal Crystals to Enhance Colorimetric Sensing

Responsive polymer-based sensors have attracted considerable attention due to their ability to detect the presence of analytes and convert the detected signal into a physical and/or chemical change. High responsiveness, fast response speed, good linearity, strong stability, and small hysteresis are ideal, but to gain these properties at the same time remains challenging. This paper presents a facile and efficient method to improve the photonic sensing properties of polymeric gels by using non-close-packed monolayer colloidal crystals (ncp MCCs) as the template. Poly-(2-vinyl pyridine) (P2VP), a weak electrolyte, was selected to form the pH-responsive gel material, which was deposited onto ncp MCCs obtained by controlled O₂ plasma etching of close-packed (cp) MCCs. The resultant ultrathin photonic polymer gel film (UPPGF) exhibited significant improvement in responsiveness and linearity towards pH sensing compared to those prepared using cp MCCs template, achieving fast visualized monitoring of pH changes with excellent cyclic stability and small hysteresis loop. The responsiveness and linearity were found to depend on the volume and filling fraction of the polymer gel. Based on a simple geometric model, we established that the volume increased first and then decreased with the decrease of template size, but the filling fraction increased all the time, which was verified by microscopy observations. Therefore, the responsiveness and linearity of UPPGF to pH can be improved by simply adjusting the etching time of oxygen plasma. The well-designed UPPGF is reliable for visualized monitoring of analytes and their concentrations, and can easily be combined in sensor arrays for more accurate detection.

Thermal and stress tension dual-responsive photonic crystal nanocomposite hydrogels

Easily prepared dual-responsive optical nanocomposite hydrogel (ONH) sensors which are responsive to tension and temperature are reported in which polymethyl methacrylate (PMMA) colloidal arrays were embedded into the hydrogels to obtain an optical response. Because of the band gap in the photonic crystal (PhC), the bright color of ONHs can be tuned by an external stimulus according to Bragg’s law. Thermosensitive N-isopropyl acrylamide (NiPAm) is added to the gel system, and by controlling NiPAm content and temperature, the contraction of the dual-response ONHs and the structural color response in the visible light range can change accordingly. Meanwhile, the temperature responses can be repeated more than seven times. Owing to the high biocompatibility, the excellent temperature response and the good mechanical strength of the ONHs, such optical biosensors have wide application in the biological field as an external stimulus sensor for implantable sensors, intracorporeal pressure measurement, and body temperature detection.

Easily prepared dual-responsive optical nanocomposite hydrogel (ONH) sensors which are responsive to tension and temperature are reported.

L-Glutamine-assisted synthesis of ZnO oatmeal-like/silver composites as an electrochemical sensor for Pb2+ detection

We report a green synthesis of oatmeal ZnO/silver composites in the presence of L-glutamine as an electrochemical sensor for Pb²⁺ detection. The synthesis was performed via the direct reduction of Ag⁺ in the presence of L-glutamine in NaOH. X-ray diffraction indicated that the Ag⁺ was completely reduced to metallic Ag. The field emission scanning electron microscopy (FESEM) and energy dispersive X-ray results confirmed an oatmeal-like morphology of the ZnO with the presence of Ag. The FESEM images showed the effect of L-glutamine on the ZnO morphology. The EIS results confirmed a significant decrease in the charge transfer resistance of the modified glassy carbon electrode due to the presence of Ag. From the differential pulse voltammetry results, a linear working range for the concentration of Pb²⁺ between 5 and 6 nM with LOD of 0.078 nM (S/N = 3) was obtained. The sensitivity of the linear segment is 1.42 μA nM^-1 cm^-2. The presence of L-glutamine as the capping agent and stabilizer decreases the size of Ag nanoparticles and prevents the agglomeration of ZnO, respectively. Graphical abstract ᅟ.

Responsive Protein Hydrogels Assembled from Spider Silk Carboxyl-Terminal Domain and Resilin Copolymers

Responsive protein hydrogels are known to respond to target external stimuli that cause changes in their properties, attracting considerable attention for diverse applications. Here we report the design and recombinant biosynthesis of protein copolymers via genetic fusion of repeating units of resilin with spider silk carboxyl-terminal (CT) domain. The resulting copolymers were thermoresponsive in aqueous solutions, and formed reversible hydrogels at low temperatures and irreversible hydrogels at high temperatures within minutes, a peculiar dual thermogelation feature endowed by the CT domain. The incorporation of resilin blocks upshifted the temperature range of reversible gelation and hydrogel stiffness, whereas the temperature of irreversible gelation was differentially affected by the length of the resilin blocks. In addition, sodium chloride and potassium phosphate at moderate concentrations downregulated both the reversible and irreversible gelation temperatures and hydrogel mechanical properties, proving the salts as another level of control over dual thermogelation. Surprisingly, the copolymers were prone to gelate at body temperature in a time-dependent manner, and the resulting hydrogels were pH-responsive to release a highly polar model drug in vitro. The newly developed resilin-CT copolymers and the multistimuli-responsive hydrogels may be potentially useful in biomedicine, such as for drug delivery.

Bioinspired Stimuli-Responsive Color-Changing Systems

Stimuli-responsive colors are a unique characteristic of certain animals, evolved as either a method to hide from enemies and prey or to communicate their presence to rivals or mates. From a material science perspective, the solutions developed by Mother Nature to achieve these effects are a source of inspiration to scientists for decades. Here, an updated overview of the literature on bioinspired stimuli-responsive color-changing systems is provided. Starting from natural systems, which are the source of inspiration, a classification of the different solutions proposed is given, based on the stimuli used to trigger the color-changing effect.

Fabrication of Hexagonal-Prismatic Granular Hydrogel Sheets

Natural soft materials are often composed of proteins that self-assemble into well-defined structures and display mechanical properties that cannot be matched by manmade materials. These materials are frequently mimicked with hydrogels whose mechanical properties depend on their composition and the type and density of cross-links. Protocols to tune these parameters are well established and routinely used. The mechanical properties of hydrogels also depend on their structure; this parameter is more difficult to control. In this paper, we present a method to produce hexagonal-prismatic granular hydrogel sheets with well-defined structures and heterogeneous cross-link densities. The hydrogel sheets are made of self-assembled covalently cross-linked 40-120 μm diameter hexagonal-prismatic hydrogel particles that display a narrow size distribution. The structure and microscale surface roughness of the hydrogels sheets can be tuned with the polymerization conditions, their chemical composition with that of the individual hydrogel particles, and their mechanical properties with the cross-link density. Remarkably, the hydrogels composed of hexagonal-prismatic microparticles are significantly stiffer than unstructured counterparts. These results demonstrate that the stiffness of hydrogels can be tuned by controlling their micrometer-scale structure without altering their composition. Thereby, they open up new possibilities to design soft materials whose performance more closely resembles that of natural ones.

Applications and developments of on-chip biochemical sensors based on optofluidic photonic crystal cavities

Photonic crystal (PC) cavities, which possess the advantages of compactness, flexible design, and suitability for integration in a lab-on-a-chip system, are able to distinguish slight variations in refractive index with only a small amount of analyte. Combined with the newly proposed optofluidic technology, PC-cavity devices stimulate an emerging class of miniaturized and label-free biochemical sensors. In this review, an overview of optofluidic PC cavities based biochemical sensors is presented. First, the basic properties of the PC, as well as the sensing principle of the PC cavity, are discussed. Second, the applications of the sensors in detecting gas, liquid, and biomolecule concentrations are reviewed, with a focus on their structures, sensing principles, sensing properties, advantages, and disadvantages. Finally, the current challenges and future development directions of optofluidic PC-cavity-based biochemical sensors are discussed.

Spontaneous Charge Generation in Flowing Albumin Solutions at 35 °C and 38 °C

The time dependence of a charge accumulation in a 10-15 M albumin solution, flowing through a measuring cell of an analytical flow system injector, had a nonlinear character under certain conditions, within a human physiological temperature range. Sharp charge increases depended on albumin concentration. This effect must be taken into consideration when generating models that describe electrokinetic phenomena in flowing protein solutions and when developing analytical flow systems for the registration of biomolecules in low concentration ranges.

Photonic crystal materials and their application in biomedicine

Photonic crystal (PC) materials exhibit unique structural colors that originate from their intrinsic photonic band gap. Because of their highly ordered structure and distinct optical characteristics, PC-based biomaterials have advantages in the multiplex detection, biomolecular screening and real-time monitoring of biomolecules. In addition, PCs provide good platforms for drug loading and biomolecule modification, which could be applied to biosensors and biological carriers. A number of methods are now available to fabricate PC materials with variable structure colors, which could be applied in biomedicine. Emphasis is given to the description of various applications of PC materials in biomedicine, including drug delivery, biodetection and tumor screening. We believe that this article will promote greater communication among researchers in the fields of chemistry, material science, biology, medicine and pharmacy.

Responsive Photonic Crystal Carbohydrate Hydrogel Sensor Materials for Selective and Sensitive Lectin Protein Detection

Lectin proteins, such as the highly toxic lectin protein, ricin, and the immunochemically important lectin, jacalin, play significant roles in many biological functions. It is highly desirable to develop a simple but efficient method to selectively detect lectin proteins. Here we report the development of carbohydrate containing responsive hydrogel sensing materials for the selective detection of lectin proteins. The copolymerization of a vinyl linked carbohydrate monomer with acrylamide and acrylic acid forms a carbohydrate hydrogel that shows specific "multivalent" binding to lectin proteins. The resulting carbohydrate hydrogels are attached to 2-D photonic crystals (PCs) that brightly diffract visible light. This diffraction provides an optical readout that sensitively monitors the hydrogel volume. We utilize lactose, galactose, and mannose containing hydrogels to fabricate a series of 2-D PC sensors that show strong selective binding to the lectin proteins ricin, jacalin, and concanavalin A (Con A). This binding causes a carbohydrate hydrogel shrinkage which significantly shifts the diffraction wavelength. The resulting 2-D PC sensors can selectively detect the lectin proteins ricin, jacalin, and Con A. These unoptimized 2-D PC hydrogel sensors show a limit of detection (LoD) of 7.5 × 10^-8 M for ricin, a LoD of 2.3 × 10^-7 M for jacalin, and a LoD of 3.8 × 10^-8 M for Con A, respectively. This sensor fabrication approach may enable numerous sensors for the selective detection of numerous lectin proteins.

Gold Nanoparticles in Photonic Crystals Applications: A Review

This review concerns the recently emerged class of composite colloidal photonic crystals (PCs), in which gold nanoparticles (AuNPs) are included in the photonic structure. The use of composites allows achieving a strong modification of the optical properties of photonic crystals by involving the light scattering with electronic excitations of the gold component (surface plasmon resonance, SPR) realizing a combination of absorption bands with the diffraction resonances occurring in the body of the photonic crystals. Considering different preparations of composite plasmonic-photonic crystals, based on 3D-PCs in presence of AuNPs, different resonance phenomena determine the optical response of hybrid crystals leading to a broadly tunable functionality of these crystals. Several chemical methods for fabrication of opals and inverse opals are presented together with preparations of composites plasmonic-photonic crystals: the influence of SPR on the optical properties of PCs is also discussed. Main applications of this new class of composite materials are illustrated with the aim to offer the reader an overview of the recent advances in this field.

Photonic crystals: emerging biosensors and their promise for point-of-care applications

Biosensors are extensively employed for diagnosing a broad array of diseases and disorders in clinical settings worldwide. The implementation of biosensors at the point-of-care (POC), such as at primary clinics or the bedside, faces impediments because they may require highly trained personnel, have long assay times, large sizes, and high instrumental cost. Thus, there exists a need to develop inexpensive, reliable, user-friendly, and compact biosensing systems at the POC. Biosensors incorporated with photonic crystal (PC) structures hold promise to address many of the aforementioned challenges facing the development of new POC diagnostics. Currently, PC-based biosensors have been employed for detecting a variety of biotargets, such as cells, pathogens, proteins, antibodies, and nucleic acids, with high efficiency and selectivity. In this review, we provide a broad overview of PCs by explaining their structures, fabrication techniques, and sensing principles. Furthermore, we discuss recent applications of PC-based biosensors incorporated with emerging technologies, including telemedicine, flexible and wearable sensing, smart materials and metamaterials. Finally, we discuss current challenges associated with existing biosensors, and provide an outlook for PC-based biosensors and their promise at the POC.

l-Glutamine-assisted synthesis of flower-like NiO and ball-flower-like NiO/Ag as an electrochemical sensor for lead(ii) detection

Flower-like NiO (F-NiO) and ball-flower-like NiO/Ag (BF-NiO–Ag) were synthesized in the presence of l-glutamine as an electrochemical sensor for lead(ii) detection.

Label-Free Photonic Crystal-Based β-Lactamase Biosensor for β-Lactam Antibiotic and β-Lactamase Inhibitor

A simple, label-free, and visual photonic crystal-based β-lactamase biosensor was developed for β-lactam antibiotic and β-lactamase inhibitor in which the penicillinase (a β-lactamase) was immobilized on the pH-sensitive colloidal crystal hydrogel (CCH) film to form penicillinase colloidal crystal hydrogel (PCCH) biosensing film. The hydrolysis of penicillin G (a β-lactam antibiotic) can be catalyzed by penicillinase to produce penicilloic acid, leading to a pH decrease in the microenvironment of PCCH film, which causes the shrink of pH-sensitive CCH film and triggers a blue-shift of the diffraction wavelength. Upon the addition of β-lactamase inhibitor, the hydrolysis reaction is suppressed and no clear blue-shift is observed. The concentrations of β-lactam antibiotic and β-lactamase inhibitor can be sensitively evaluated by measuring the diffraction shifts. The minimum detectable concentrations for penicillin G and clavulanate potassium (a β-lactamase inhibitor) can reach 1 and 0.1 μM, respectively. Furthermore, the proposed method is highly reversible and selective, and it allows determination of penicillin G in fish pond water samples.

Photonic crystal protein hydrogel sensor materials enabled by conformationally induced volume phase transition

Hydrogels that change volume in response to specific molecular stimuli can serve as platforms for sensors, actuators and drug delivery devices. There is great interest in designing intelligent hydrogels for tissue engineering, drug delivery, and microfluidics that utilize protein binding specificities and conformational changes. Protein conformational change induced by ligand binding can cause volume phase transitions (VPTs). Here, we develop a highly selective glucose sensing protein photonic crystal (PC) hydrogel that is fabricated from genetically engineered E. coli glucose/galactose binding protein (GGBP). The resulting 2-D PC-GGBP hydrogel undergoes a VPT in response to glucose. The volume change causes the 2-D PC array particle spacing to decrease, leading to a blue-shifted diffraction which enables our sensors to report on glucose concentrations. This 2-D PC-GGBP responsive hydrogel functions as a selective and sensitive sensor that easily monitors glucose concentrations from ∼0.2 μM to ∼10 mM. This work demonstrates a proof-of-concept for developing responsive, "smart" protein hydrogel materials with VPTs that utilize ligand binding induced protein conformational changes. This innovation may enable the development of other novel chemical sensors and high-throughput screening devices that can monitor protein-drug binding interactions.

Ultrathin polymer gel-infiltrated monolayer colloidal crystal films for rapid colorimetric chemical sensing

The ultrathin polymer gel-infiltrated monolayer colloidal crystal film shows rapid, linear, reversible, and colorimetric responses to pH variations.

A colloidoscope of colloid-based porous materials and their uses

Colloids assemble into a variety of bioinspired structures for applications including optics, wetting, sensing, catalysis, and electrodes.

A Photonic Crystal Protein Hydrogel Sensor for Candida albicans

We report two-dimensional (2D) photonic crystal (PC) sensing materials that selectively detect Candida albicans (C. albicans). These sensors utilize Concanavalin A (Con A) protein hydrogels with a 2D PC embedded on the Con A protein hydrogel surface, that multivalently and selectively bind to mannan on the C. albicans cell surface to form crosslinks. The resulting crosslinks shrink the Con A protein hydrogel, reduce the 2D PC particle spacing, and blue-shift the light diffracted from the PC. The diffraction shifts can be visually monitored, measured with a spectrometer, or determined from the Debye diffraction ring diameter. Our unoptimized hydrogel sensor has a detection limit of around 32 CFU/mL for C. albicans. This sensor distinguishes between C. albicans and those microbes devoid of cell-surface mannan such as the gram-negative bacterium E. coli. This sensor provides a proof-of-concept for utilizing recognition between lectins and microbial cell surface carbohydrates to detect microorganisms in aqueous environments.