Fabrication of gold nanoparticle-embedded metal-organic framework for highly sensitive surface-enhanced Raman scattering detection

Highly sensitive SERS sensors for glucose detection based on enzyme@MOFs and ratiometric Raman

Diabetes is a common chronic metabolic disease. The frequent fluctuation of glucose is the main cause of most diabetes complications, which in turn causes harm to the health of patients. Surface-enhanced Raman scattering (SERS) spectroscopy has attracted much attention in the rapid detection of glucose due to its unique molecular fingerprinting ability, ultra-high sensitivity and fast response. However, due to the low affinity between glucose and SERS substrate, poor signal, susceptibility to complex environmental interference, and poor stability of SERS detection, it is still a challenge for SERS to accurately and sensitively determine glucose in complex environments. In this work, we encapsulated 4-mercaptobutyronitrile (4-MBN) as an internal standard (IS) in Au@Ag NRs inside and then Au@4-MBN@Ag NRs, Leucomalachite Green (LMG), glucose oxidase (GOx) and horseradish peroxidase (HPR) were encapsulated in ZIF-8 to prepare a tandem enzyme catalytic ratiometric SERS sensor Au@4-MBN@Ag@LMG@ZIF-8(GOx, HPR) for the detection of glucose in saliva. Because ZIF-8 enhanced the catalytic activity of the enzyme, the ability of glucose enrichment, and weakens the aggregation of Ag NRs. The internal standard signal molecule improves the accuracy and sensitivity of detection. The ratiometric Raman signal I412/I2233 of glucose has a good linear relationship with the concentration in the range of 0.1-100 μM, and the limit of detection (LOD) could be down to 0.03 μM. At the same time, it has excellent selectivity, repeatability and accuracy. The recovery rate of glucose in saliva is 96.50%-105.56 %, which proves the feasibility of the method. The Au@4-MBN@Ag@LMG@ZIF-8(GOx, HPR) sensor prepared in this study showed excellent SERS performance, which was able to detect glucose quickly, sensitively and accurately. This work provides a new strategy for the design of enzyme-catalyzed SERS sensors.

Metal-Organic Framework-Enabled Trapping of Volatile Organic Compounds into Plasmonic Nanogaps for Surface-Enhanced Raman Scattering Detection

Utilizing electromagnetic hotspots within plasmonic nanogaps is a promising approach to create ultrasensitive surface-enhanced Raman scattering (SERS) substrates. However, it is difficult for many molecules to get positioned in such nanogaps. Metal-organic frameworks (MOFs) are commonly used to absorb and concentrate diverse molecules. Herein, we combine these two strategies by introducing MOFs into plasmon-coupled nanogaps, which has so far remained experimentally challenging. Ultrasensitive SERS substrates are fabricated through the construction of nanoparticle-on-mirror structures, where Au nanocrystals are encapsulated with a zeolitic imidazolate framework-8 (ZIF-8) shell and then coupled to a gold film. The ZIF-8 shell, as a spacer that separates the Au nanocrystal and the Au film, can be adjusted in thickness over a wide range, which allows the electric field enhancement and plasmon resonance wavelength to be varied. By trapping Raman-active molecules within the ZIF-8 shell, we show that our plasmon-coupled structures exhibit a superior SERS detection performance. A range of volatile organic compounds at the concentrations of 10-2 mg m-3 can be detected sensitively and reliably. Our study therefore offers an attractive route for synergistically combining plasmonic electric field enhancement and MOF-enabled molecular enrichment to design and create SERS substrates for ultrasensitive detection.

Unveiling the Dual-Enhancing Mechanisms of Kinetically Controlled Silver Nanoparticles on Piezoelectric PVDF Nanofibers for Optimized SERS Performance

Noble metal nanoparticle (NMP)-based composite substrates have garnered significant attention as a highly promising technique for surface-enhanced Raman scattering (SERS) in diverse scientific disciplines because their remarkable ability to amplify and functionalize Raman signals has positioned them as valuable tools for molecular detection. However, optimizing the size and distribution of NMPs has not received sufficient emphasis because of challenges associated with the precise control of deposition and the modulation of reducing rates during growth. In this research, we achieved the optimized size and spatial patterns of AgNWs on electrospun poly(vinylidene fluoride) (PVDF) nanofibers by utilizing a polydopamine (PDA) layer as a mild and controllable reduction mediator, by which the size and density of the AgNWs could be relatively precisely manipulated, achieving a dense distribution of effective "hot spots". On the other hand, harnessing the inherent piezoelectric properties of the electrospun PVDF nanofibers further boosted the LSPR effect during the SERS test, forming a flexible dual-enhancing composite SERS substrate with excellent sensitivity. In addition to addressing structural aspects, exploiting synergistic systems capable of transferring external energy or forces to enhance the SERS performances presents a compelling avenue to broaden the practical applications of SERS. The dual-enhanced substrate achieved an exceptional enhancement factor (EF) of 1.05 × 108 and a low detection limit (LOD) of 10-10 M during the SERS test. This study focuses on integrating NMPs with electrospun piezoelectric polymer nanofibers to develop a dual-enhancing SERS substrate with excellent sensitivity and practicality. The findings provide valuable insights into controllably depositing NMPs on electrospun polymer fibers and hold significant implications for the development of highly sensitive and practical SERS substrates across various applications.

Highly Sensitive Measurement of Horseradish Peroxidase Using Surface-Enhanced Raman Scattering of 2,3-Diaminophenazine

The development of various enzyme-linked immunosorbent assays (ELISAs) coupled with surface-enhanced Raman scattering (SERS) detection is a growing area in analytical chemistry due to their potentially high sensitivity. A SERS-based ELISA with horseradish peroxidase (HRP) as an enzymatic label, an o-phenylenediamine (oPD) substrate, and a 2,3-diaminophenazine (DAP) enzymatic product was one of the first examples of such a system. However, the full capabilities of this long-known approach have yet to be revealed. The current study addresses a previously unrecognized problem of SERS detection stage performance. Using silver nanoparticles and model mixtures of oPD and DAP, the effects of the pH, the concentration of the aggregating agent, and the particle surface chloride stabilizer were extensively evaluated. At the optimal mildly acidic pH of 3, a 0.93 to 1 M citrate buffer, and AgNPs stabilized with 20 mM chloride, a two orders of magnitude advantage in the limits of detection (LODs) for SERS compared to colorimetry was demonstrated for both DAP and HRP. The resulting LOD for HRP of 0.067 pmol/L (1.3 amol per assay) underscores that the developed approach is a highly sensitive technique. We suppose that this improved detection system could become a useful tool for the development of SERS-based ELISA protocols.

A Recent Advancement in Food Quality Assessment: Using MOF-Based Sensors: Challenges and Future Aspects

Monitoring food safety is crucial and significantly impacts the ecosystem and human health. To adequately address food safety problems, a collaborative effort needed from government, industry, and consumers. Modern sensing technologies with outstanding performance are needed to meet the growing demands for quick and accurate food safety monitoring. Recently, emerging sensors for regulating food safety have been extensively explored. Along with the development in sensing technology, the metal-organic frameworks (MOF)-based sensors gained more attention due to their excellent sensing, catalytic, and adsorption properties. This review summarizes the current advancements and applications of MOFs-based sensors, including colorimetric, electrochemical, luminescent, surface-enhanced Raman scattering, and electrochemiluminescent sensors. and also focused on the applications of MOF-based sensors for the monitoring of toxins such as heavy metals, pesticide residues, mycotoxins, pathogens, and illegal food additives from food samples. Future trends, as well as current developments in MOF-based materials.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Determination of sulfide in complex biofilm matrices using silver-coated, 4-mercaptobenzonitrile-modified gold nanoparticles, encapsulated in ZIF-8 as surface-enhanced Raman scattering nanoprobe

A surface-enhanced Raman scattering nanoprobe has been developed for sulfide detection and applied to  complex bacterial biofilms. The nanoprobe, Au@4-MBN@Ag@ZIF-8, comprised a gold core modified with 4-mercaptobenzonitrile (4-MBN) as signaling source, a layer of silver shell as the sulfide sensitization material, and a zeolitic imidazolate framework-8 (ZIF-8) as surface barrier. ZIF-8, with its high surface area and mesoporous structure, was applied to preconcentrate sulfide around the nanoprobe with its excellent adsorption capacity. Besides, the external wrapping of ZIF-8 can not only prevent the interference of biomolecules, such as proteins, with the Au@4-MBN@Ag assay but also enhance the detection specificity through the sulfide cleavage function towards ZIF-8. These properties are critical for the application of this nanoprobe to complex environmental scenarios. In the presence of sulfide, it was first enriched through adsorption by the outer ZIF-8 layer, then destroyed the barrier layer, and subsequently reacted with the Ag shell, leading to changes in the Raman signal. Through this rational design, the Au@4-MBN@Ag@ZIF-8 nanoprobe exhibited excellent detection sensitivity, with a sulfide detection limit in the nanomolar range and strong linearity in the concentration range  50 nM to 500 μM. Furthermore, the proposed Au@4-MBN@Ag@ZIF-8 nanoprobe was effectively utilized for sulfide detection in intricate biofilm matrices, demonstrating its robust selectivity and reproducibility.

Chemical-Chemical Redox Cycle Signal Amplification Strategy Combined with Dual Ratiometric Immunoassay for Surface-Enhanced Raman Spectroscopic Detection of Cardiac Troponin I

Improving the sensitivity and reproducibility of surface-enhanced Raman spectroscopy (SERS) methods for the detection of bioactive molecules is crucial in biological process research and clinical diagnosis. Herein, we designed a novel SERS platform for cardiac troponin I (cTnI) detection by a chemical-chemical redox cycle signal amplification strategy combined with a dual ratiometric immunoassay. First, ascorbic acid (AA) was generated by enzyme-assisted immunoreaction with a cTnI-anchored sandwich structure. Then, oxidized 4-mercaptophenol (ox4-MP) was reacted with AA to produce 4-mercaptophenol (4-MP). Quantitative analysis of cTnI was realized by a Raman signal switch between ox4-MP and 4-MP. Specifically, AA could be regenerated by reductant (tris(2-carboxyethyl) phosphine, TCEP), which in turn produced more signal indicator 4-MP, causing significant signal amplification for cTnI analysis by SERS immunosensing. Moreover, a dual ratiometric-type SERS method was established with the intensity ratio I1077/I822 and I633/I822, which improved the reproducibility of the cTnI assay. The excellent performance of the chemical-chemical redox cycle strategy and ratio-type SERS assay endows the method with high sensitivity and reproducibility. The linear ranges of cTnI were 0.001 to 50.0 ng mL-1 with detection limits of 0.33 pg mL-1 (upon I1077/I822) and 0.31 pg mL-1 (upon I635/I822), respectively. The amount of cTnI in human serum samples yielded recoveries from 89.0 to 114%. This SERS method has remarkable analytical performance, providing an effective approach for the early diagnosis of cardiovascular diseases, and has great latent capacity in the sensitive detection of bioactive molecules.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

Recent Progress in the Application of Metal Organic Frameworks in Surface-Enhanced Raman Scattering Detection

Metal-organic framework (MOF) compounds are centered on metal ions or metal ion clusters, forming lattices with a highly ordered periodic porous network structure by connecting organic ligands. As MOFs have the advantages of high porosity, large specific surface area, controllable pore size, etc., they are widely used in gas storage, catalysis, adsorption, separation and other fields. SERS substrate based on MOFs can not only improve the sensitivity of SERS analysis but also solve the problem of easy aggregation of substrate nanoparticles. By combining MOFs with SERS, SERS performance is further improved, and tremendous research progress has been made in recent years. In this review, three methods of preparing MOF-based SERS substrates are introduced, and the latest applications of MOF-based SERS substrates in biosensors, the environment, gases and medical treatments are discussed. Finally, the current status and prospects of MOF-based SERS analysis are summarized.

Metal-Organic Frameworks-Based Optical Nanosensors for Analytical and Bioanalytical Applications

Metal-organic frameworks (MOFs)-based optical nanoprobes for luminescence and surface-enhanced Raman spectroscopy (SERS) applications have been receiving tremendous attention. Every element in the MOF structure, including the metal nodes, the organic linkers, and the guest molecules, can be used as a source to build single/multi-emission signals for the intended analytical purposes. For SERS applications, the MOF can not only be used directly as a SERS substrate, but can also improve the stability and reproducibility of the metal-based substrates. Additionally, the porosity and large specific surface area give MOF a sieving effect and target molecule enrichment ability, both of which are helpful for improving detection selectivity and sensitivity. This mini-review summarizes the advances of MOF-based optical detection methods, including luminescence and SERS, and also provides perspectives on future efforts.

Controlled fiber core mode and surface mode interaction for enhanced SERS performance

Three-dimensional surface-enhanced Raman scattering (SERS) platform based on microstructure fibers has many advantages for rapid liquid detection due to its microfluidic channels and light guidance. The fiber mode field distribution determines the light-analyte interaction strength but has rarely been studied in SERS applications. In this paper, we numerically and experimentally investigate the mode field distribution in suspended-core fibers decorated with gold nanoparticles. The interaction between the core mode and surface mode is controlled by changing the density of gold nanoparticles on the inner surface. The avoided crossing wavelength shifts linearly to red with the decrease of the nanoparticle spacing. With an optimized nanoparticle spacing of 20 nm, the avoided crossing occurs near the laser wavelength of 633 nm, which greatly increases the power ratio in the liquid channels and hence improves the SERS performance. The detection limit for crystal violet was 10^-9 M, and the enhancement factor was 10⁸. The avoided crossing mechanism can be applied to all fiber SERS probes for sensitivity improvement.

Recent Progress in Nanotechnology-Based Approaches for Food Monitoring

Throughout the food supply chain, including production, storage, and distribution, food can be contaminated by harmful chemicals and microorganisms, resulting in a severe threat to human health. In recent years, the rapid advancement and development of nanotechnology proposed revolutionary solutions to solve several problems in scientific and industrial areas, including food monitoring. Nanotechnology can be incorporated into chemical and biological sensors to improve analytical performance, such as response time, sensitivity, selectivity, reliability, and accuracy. Based on the characteristics of the contaminants and the detection methods, nanotechnology can be applied in different ways in order to improve conventional techniques. Nanomaterials such as nanoparticles, nanorods, nanosheets, nanocomposites, nanotubes, and nanowires provide various functions for the immobilization and labeling of contaminants in electrochemical and optical detection. This review summarizes the recent advances in nanotechnology for detecting chemical and biological contaminations in the food supply chain.

Recent Progress on Solid Substrates for Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy technique with distinguished features of non-destructivity, ultra-sensitivity, rapidity, and fingerprint characteristics for analysis and sensors. The SERS signals are mainly dependent on the engineering of high-quality substrates. Recently, solid SERS substrates with diverse forms have been attracting increasing attention due to their promising features, including dense hot spot, high stability, controllable morphology, and convenient portability. Here, we comprehensively review the recent advances made in the field of solid SERS substrates, including their common fabrication methods, basic categories, main features, and representative applications, respectively. Firstly, the main categories of solid SERS substrates, mainly including membrane substrate, self-assembled substrate, chip substrate, magnetic solid substrate, and other solid substrate, are introduced in detail, as well as corresponding construction strategies and main features. Secondly, the typical applications of solid SERS substrates in bio-analysis, food safety analysis, environment analysis, and other analyses are briefly reviewed. Finally, the challenges and perspectives of solid SERS substrates, including analytical performance improvement and largescale production level enhancement, are proposed.

Nanocrystalline Cellulose Cures Constipation via Gut Microbiota Metabolism

Constipation can seriously affect the quality of life and increase the risk of colorectal cancer. The present strategies for constipation therapy have adverse effects, such as causing irreversible intestinal damage and affecting the absorption of nutrients. Nanocrystalline cellulose (NCC), which is from natural plants, has good biocompatibility and high safety. Herein, we used NCC to treat constipation assessed by the black stool, intestinal tissue sections, and serum biomarkers. We studied the effect of NCC on gut microbiota and discussed the correlation of gut microbiota and metabolites. We evaluated the long-term biosafety of NCC. NCC could effectively treat constipation through gut microbiota metabolism, which required a small dosage and did not affect the organs and intestines. NCC could be used as an alternative to medications and dietary fiber for constipation therapy.

Metal-organic frameworks based surface-enhanced Raman spectroscopy technique for ultra-sensitive biomedical trace detection

Metal-organic frameworks (MOFs) have attracted widespread interest due to their unique and unprecedented advantages in microstructures and properties. Besides, surface-enhanced Raman scattering (SERS) technology has also rapidly developed into a powerful fingerprint spectroscopic technique that can provide rapid, non-invasive, non-destructive, and ultra-sensitive detection, even down to single molecular level. Consequently, a considerable amount of researchers combined MOFs with the SERS technique to further improve the sensing performance and broaden the applications of SERS substrates. Herein, representative synthesis strategies of MOFs to fabricate SERS-active substrates are summarized and their applications in ultra-sensitive biomedical trace detection are also reviewed. Besides, relative barriers, advantages, disadvantages, future trends, and prospects are particularly discussed to give guidance to relevant researchers.

AuNPs@MIL-101 (Cr) as a SERS-Active Substrate for Sensitive Detection of VOCs

Surface-enhanced Raman scattering (SERS) is an important and powerful analytical technique in chemical and biochemical analyses. Metal–organic frameworks (MOFs) can effectively capture volatile organic compounds (VOCs) with high adsorption capacity and fast kinetics, and the local surface plasmon resonance characteristics of gold nanoparticles can quickly and effectively distinguish different VOCs by SERS. Combining both, we designed a novel SERS substrate based on embedding gold nanoparticles (AuNPs) within MIL-101(Cr) for the recognition of various VOCs in the gaseous phase. Occupying of AuNPs inside MIL-101(Cr) increased the micropore-specific surface area of AuNPs@MIL-101(Cr), which enabled AuNPs@MIL-101(Cr) to absorb more toluene molecules and consequently realized its high detection sensitivity. The detection limits for toluene, 4-ethylbenzaldehyde, and formaldehyde were down to 6, 5, and 75, ppm respectively. Moreover, this substrate could be used for detecting different VOCs simultaneously. Finally, we discussed the enhancement of AuNPs outside and inside MIL-101(Cr) on the Raman signal.

Fabrication of branched gold copper nanoalloy doped mesoporous graphitic carbon nitride hybrid membrane for surface-enhanced Raman spectroscopy analysis of carcinogens

Carcinogens in food samples show great potential threat to human health due to their wide distribution and high carcinogenicity. In this work, branched AuCu nanoalloy doped mesoporous graphitic carbon nitride hybrid membrane (mpg-C₃N₄/AuCu) was fabricated for SERS analysis of carcinogens including benzidine and zearalenone in food. The AuCu was in-situ grown on mpg-C₃N₄ to form mpg-C₃N₄/AuCu composites. The as-fabricated mpg-C₃N₄/AuCu membrane can effectively combined synergistic effect of localized surface plasmon resonance properties of branched AuCu nanoalloy and semiconductor characteristics of mpg-C₃N₄. The limit of detection for crystal violet is 1.0 ng/L with enhancement factor of 3.7 × 10⁸. The mechanism of high SERS activity of mpg-C₃N₄/AuCu membrane was investigated by density functional theory simulations. The mpg-C₃N₄/AuCu membrane was used for direct determination of benzidine, and indirect determination of zearalenone with 3,3',5,5'-tetramethylbenzidine as markers in food. The limits of detection of SERS method were 0.14 and 0.03 μg/L for benzidine and zearalenone, respectively. It provides a new strategy for design and fabrication of high-quality SERS substrates for carcinogens analysis.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Dimensional Design for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that enables specific identification of target analytes with sensitivity down to the single-molecule level by harnessing metal nanoparticles and nanostructures. Excitation of localized surface plasmon resonance of a nanostructured surface and the associated huge local electric field enhancement lie at the heart of SERS, and things will become better if strong chemical enhancement is also available simultaneously. Thus, the precise control of surface characteristics of enhancing substrates plays a key role in broadening the scope of SERS for scientific purposes and developing SERS into a routine analytical tool. In this review, the development of SERS substrates is outlined with some milestones in the nearly half-century history of SERS. In particular, these substrates are classified into zero-dimensional, one-dimensional, two-dimensional, and three-dimensional substrates according to their geometric dimension. We show that, in each category of SERS substrates, design upon the geometric and composite configuration can be made to achieve an optimized enhancement factor for the Raman signal. We also show that the temporal dimension can be incorporated into SERS by applying femtosecond pulse laser technology, so that the SERS technique can be used not only to identify the chemical structure of molecules but also to uncover the ultrafast dynamics of molecular structural changes. By adopting SERS substrates with the power of four-dimensional spatiotemporal control and design, the ultimate goal of probing the single-molecule chemical structural changes in the femtosecond time scale, watching the chemical reactions in four dimensions, and visualizing the elementary reaction steps in chemistry might be realized in the near future.

SERS determination of dopamine using metal-organic frameworks decorated with Ag/Au noble metal nanoparticle composite after azo derivatization with p-aminothiophenol

A specific surface-enhanced Raman scattering (SERS) assay for dopamine (DA) based on an azo derivatization reaction is proposed for the first time by preparation of p-aminothiophenol (PATP)-modified composite SERS substrate, composed of metal-organic framework (MIL-101) decorated with Au and Ag nanoparticles. As the result, the SERS method for detection of the azo reaction between PATP and DA exhibits superior sensitivity, selectivity, and stability. A reasonable linearity in the range 10^-6 to 10^-10 mol∙L^-1 is achieved, and the limit of detection is 1.2 × 10^-12 mol∙L^-1. The reactive SERS assay is free from interference in complex physiological fluid. The feasibility of the proposed SERS method for the detection of DA levels in fetal bovine serum (FBS) samples and human serum samples is validated by HPLC-MS methods, displaying promising application potential in early disease diagnosis.

A dual-responsive nanozyme sensor with ultra-high sensitivity and ultra-low cross-interference towards metabolic biomarker monitoring

Accurate, sensitive and selective detection of metabolic biomarkers in biofluids are of vital significance for health self-monitoring and chronic disease prevention. Here, for the first time, a smart dual-responsive nanozyme sensor (DNS) was developed for simultaneous analysis of glucose and caffeine utilizing stimuli-responsive yolk-shell gold nanoparticles (GNPs)-embedded MIL-53 (Al) (GNPs@MIL-53) structures. After the introduction of glucose, GNPs@MIL-53 displays excellent glucose oxidase (GOx)-like activity to induce the conversion of glucose to gluconic acid and H₂O₂. H₂O₂ can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) with the generation a bright-blue color, enabling in-field visualization and surface enhanced Raman scattering (SERS) detection of glucose. Upon the addition of caffeine, 2-aminoterephthalic acid modified MIL-53 can react with the caffeine to form intermolecular hydrogen-bonded complexes, leading to strong cyan fluorescence and significant Raman enhancements. The DNS with multi-channel signal outputs can simultaneously determine glucose and caffeine at concentrations of as low as 3 × 10^-8 M and 1.2 × 10^-11 M, respectively. Importantly, the DNS-based analytical system not only enables visual discrimination and accurate assay of glucose and caffeine in biofluids, but also exhibits negligible cross-interference between glucose and caffeine determination. The combined characteristics of high selectivity, enhanced accuracy and superior quantitative performance make our platform suitable for the point-of-care monitoring of chronic-disease-related metabolic biomarkers.

Layered filter paper-silver nanoparticle-ZIF-8 composite for efficient multi-mode enrichment and sensitive SERS detection of thiram

A SERS substrate FP/Ag/ZIF-8 composed of filter paper (FP), silver nanoparticles (AgNPs) and zeolitic imidazolate framework (ZIF-8) film arranged in a layered structure was developed for sensitive detection of pesticide thiram in various samples. Roles of these components in analyte adsorption and Raman signal enhancement were studied using a pesticide intermediate 4-Aminothiophenol (4-ATP) as the probe. The substrate showed high adsorption and optimized SERS response with thick metal organic framework (MOF) coating (125 nm), which is different from previous reported plasmonic particle-MOF composite substrate, where thinnest MOF coating produced the strongest SERS signal. Detection limit for 4-ATP improved 1000-fold on FP/Ag/ZIF-8 (3 pM) compared with that on FP/Ag (3 nM). Importantly, the FP/Ag/ZIF-8 with porous and flexible property can efficiently capture pesticide thiram in different real samples using soaking, filtration or swabbing operation. The subsequent SERS detection of thiram showed advantages of low detection limit (soaking, LOD: 0.04 nM in lake water), fast detection (filtration, within 1 min in peach juice) and suitable for curve surface analysis (swabbing, LOD: 0.1 ng/cm² on apple peel), respectively. The substrate also displayed good reproducibility, high stability and size-selective response for thiram detection. Such a layered plasmonic particle/MOF hybrid may hold great promise for toxicant analysis in environment and food.

Metal-Organic Frameworks-Based Sensors for Food Safety

Food contains a variety of poisonous and harmful substances that have an impact on human health. Therefore, food safety is a worldwide public concern. Food detection approaches must ensure the safety of food at every step of the food supply chain by monitoring and evaluating all hazards from every single step of food production. Therefore, early detection and determination of trace-level contaminants in food are one of the most crucial measures for ensuring food safety and safeguarding consumers’ health. In recent years, various methods have been introduced for food safety analysis, including classical methods and biomolecules-based sensing methods. However, most of these methods are laboratory-dependent, time-consuming, costly, and require well-trained technicians. To overcome such problems, developing rapid, simple, accurate, low-cost, and portable food sensing techniques is essential. Metal-organic frameworks (MOFs), a type of porous materials that present high porosity, abundant functional groups, and tunable physical and chemical properties, demonstrates promise in large-number applications. In this regard, MOF-based sensing techniques provide a novel approach in rapid and efficient sensing of pathogenic bacteria, heavy metals, food illegal additives, toxins, persistent organic pollutants (POPs), veterinary drugs, and pesticide residues. This review focused on the rapid screening of MOF-based sensors for food safety analysis. Challenges and future perspectives of MOF-based sensors were discussed. MOF-based sensing techniques would be useful tools for food safety evaluation owing to their portability, affordability, reliability, sensibility, and stability. The present review focused on research published up to 7 years ago. We believe that this work will help readers understand the effects of food hazard exposure, the effects on humans, and the use of MOFs in the detection and sensing of food hazards.

Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets with Activated Ligand-Cluster Units for Enhanced SERS

Ultrathin two-dimensional (2D) metal-organic framework (MOF) nanosheets (MOFNs) comprise an emerging family of attractive materials with excellent potential for use in different catalytic, electrochemical, and sensing applications owing to their striking features such as ultrathin thickness, a large surface area, and highly ordered network structures. However, to the best of our knowledge, the ligand-cluster units activated through exfoliation into the MOFNs have rarely been realized, which is indeed crucial for surface-enhanced Raman scattering (SERS) analysis. Herein, we emphasize that the activated ligand-cluster units are based on the accessible coordination sites at the exposed cluster nodes accompanied by a complete excitation of the ligand-cluster units under incident photons, which make MOFNs highly effective SERS substrates, significantly outperforming their bulk counterparts. The SERS enhancement of MOFNs is further illustrated by an efficient integration of the inherent ligand-cluster charge-transfer (LCCT) transitions in MOFNs into interfacial charge-transfer processes through an "L"-type charge-transfer (CT) pathway, as further evidenced by an ultrahigh degree (0.98) of CT contributed to the SERS enhancement. This study provides an efficient strategy of exfoliating MOFs into ultrathin nanosheets for the design of highly efficient MOF-based SERS substrates.

Ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots for the detection of α-fetoprotein via fluorescence resonance energy transfer

The ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots is superior to the traditional single-wavelength-based method.

A facile dual-mode aptasensor based on AuNPs@MIL-101 nanohybrids for ultrasensitive fluorescence and surface-enhanced Raman spectroscopy detection of tetrodotoxin

The development of ultrasensitive, reliable, and facile detection technologies for trace tetrodotoxin (TTX) is challenging. We presented a facile dual-mode aptamer-based biosensor (aptasensor) for ultrasensitive fluorescence and surface-enhanced Raman spectroscopy (SERS) detection of TTX by using gold nanoparticles (AuNPs)-embedded metal-organic framework (MOF) nanohybrids (AuNPs@MIL-101) because of their superior properties. A TTX-specific aptamer labelled with fluorescence and Raman reporter cyanine-3 (Cy3-aptamer) was selected as the recognition element and signal probe. Without immobilisation processing steps, Cy3-aptamers were effectively adsorbed onto the surface of AuNPs@MIL-101, thereby generating both fluorescence quenching and SERS enhancement. The preferential binding of TTX towards the Cy3-aptamer triggered the release of rigid Cy3-aptamer-TTX complexes from the AuNPs@MIL-101 surface, which resulted in recovered fluorescence signals and weakened SERS signals. Switched fluorescence and SERS intensities exhibited excellent linear relationships with logarithms of TTX concentrations of 0.01-300 ng/mL, and ultrahigh detection sensitivities of 6 and 8 pg/mL, respectively, were obtained. Furthermore, two quantitative detection approaches for TTX-spiked puffer fish and clam samples obtained satisfactory spiked recoveries and coefficient of variation (CV) values. Notably, the dual-mode aptasensor also successfully determined natural TTX-contaminated samples, showing excellent practical applications. The results indicated that this dual-mode measurement not only was ultrasensitive and simple but also markedly boosted analysis reliability and precision. This study is the first to propose a dual-mechanism AuNPs@MIL-101-based aptasensor for detection of trace TTX and provides a favourable pathway for developing multimode sensing platforms for various applications.

Site-Selective Deposition of Metal-Organic Frameworks on Gold Nanobipyramids for Surface-Enhanced Raman Scattering

Site-selective deposition of metal-organic frameworks (MOFs) on metal nanocrystals has remained challenging because of the difficult control of the nucleation and growth of MOFs. Herein we report on a facile wet-chemistry approach for the selective deposition of zeolitic imidazolate framework-8 (ZIF-8) on anisotropic Au nanobipyramids (NBPs) and nanorods. ZIF-8 is selectively deposited at the ends and waist and around the entire surface of the elongated Au nanocrystals. The NBP-based nanostructures with end-deposited ZIF-8 exhibit the best surface-enhanced Raman scattering (SERS) performance, implying that molecules can be concentrated by ZIF-8 at the hot spots. In addition, the SERS signal exhibits good selectivity for small molecules because of the molecular sieving effect of ZIF-8. This study opens up a promising route for constructing plasmonic nanostructures with site selectively deposited ZIF-8, which hold enormous potential for molecular sensing, optical switching, and plasmonic catalysis.

SERS-ELISA determination of human carboxylesterase 1 using metal-organic framework doped with gold nanoparticles as SERS substrate

By in situ synthesis of gold nanoparticles (AuNPs) within the acid-etched (AE) MIL-101 (Cr) framework, AE-MIL-101 (Cr) nanocomposites embedded with AuNPs (AuNP/AE-MIL-101 (Cr)) were prepared as surface-enhanced Raman scattering (SERS) substrate. AuNPs are uniformly distributed and stabilized inside the metal-organic framework (MOF), thus forming more SERS hotspots. The SERS performance of AuNP/AE-MIL-101 (Cr) was evaluated using 4-mercaptophenylboronic acid (4-MPBA), 4-mercaptobenzoic acid (4-MBA), benzidine, and rhodamine 6G (R6G). The SERS substrate displays satisfying stability with very low background signal. When benzidine is used as the Raman reporter, the limit of detection (LOD) can reach 6.7 × 10^-13 mol·L^-1, and the relative standard deviation (RSD) of the intra- and inter-batch repetitive tests is less than 5.2%. On this basis, we developed a method for the detection of human carboxylesterase 1 (hCE 1) in human serum using AuNP/AE-MIL-101 (Cr) nanocomposite as SERS substrate and enzyme-linked immunosorbent assay (ELISA) colorimetric substrate as SERS marker. This method was used to determine hCE 1 in clinical serum samples without complicated sample pretreatment, and the detection results were consistent with the data determined by ELISA. In the concentration range 0.1-120 ng·mL^-1, the SERS signal intensity of benzidine at 1609 cm^-1 gradually decreases with the increase of hCE 1 concentration (R² = 0.9948). The average recoveries of hCE 1 in human serum are in the range 84 to 108%, with RSDs lower than 7.7%. By using AuNP/acid etching-MIL-101(Cr) metal organic framework (MOF) as SERS substrate and enzyme-linked immunosorbent assay (ELISA) colorimetric substrate as the SERS marker, a rapid and sensitive method for the determination of human carboxylesterase 1 (hCE1) in human serum samples has been developed.

ZEUS (ZIF-based electrochemical ultrasensitive screening) device for isopentane analytics with focus on lung cancer diagnosis

Breath analytics is currently being explored for the development of point-of-care devices in non-invasive disease detection. It is based on the measurement of volatile organic compounds (VOCs) and gases that are produced by the body because of the metabolic pathways. The levels of these metabolites vary due to alteration in the endogenous oxidative stress-related metabolic pathways and can be correlated to understand the underlying disease condition. The levels of exhaled hydrocarbons in human breath can be used to design a rapid, easy to use method for lung cancer detection. This work outlines the development of an electrochemical sensing platform that can be used for the non-invasive diagnosis of lung cancer by monitoring isopentane levels in breath. This electrochemical sensor platform involves the use of [BMIM]BF₄@ZIF-8 for sensing the target analyte. This synthesized nanocomposite offers advantages for gas sensing applications as it possesses unique properties such as an electrochemically active Room Temperature Ionic Liquid (RTIL) and a crosslinking Metal Organic Framework (MOF) that provides increased surface area for gas absorption. This is the first report of a hydrocarbon-based sensor platform developed for lung cancer diagnosis. The developed sensor platform displays sensitivity and specificity for the detection of isopentane up to 600 parts-per-billion. We performed structural and morphological characterization of the synthesized nanocomposite using various analytical techniques such as PXRD, FESEM, FTIR, and DLS. We further analyzed the electrochemical activity of the synthesized nanocomposite using a standard glassy carbon electrode. The application of the nanocomposite for isopentane sensing was done using a commercially available carbon screen printed electrode. The results so obtained helped in strengthening our hypothesis and serve as a proof-of-concept for the development of a breathomics-enabled electrochemical strategy. We illustrated the specificity of the developed nanocomposite by cross-reactivity studies. We envision that the detection platform will allow sensitive and specific sensing of isopentane levels such that it can used for point of care applications in noninvasive and early diagnosis of lung cancer, thereby leading to its early treatment and decrease in mortality rate.

A novel synthesized [BMIM]BF₄@ZIF-8 nanocomposite for electrochemical sensing of isopentane as a biomarker for lung cancer diagnosis.

UiO-66 metal-organic frameworks/gold nanoparticles based substrates for SERS analysis of food samples

Recently, metal-organic frameworks (MOFs) based substrates have shown great potential for the quantitative analysis of food samples by surface-enhanced Raman scattering (SERS) due to their unique properties. Herein, we developed two UiO-66 MOFs/gold nanoparticles (AuNPs) based substrates by self-assembly, including UiO-66/AuNPs suspension substrate and UiO-66(NH₂)/AuNPs/Nylon-66 flexible membrane substrate, for quantitative analysis of complex food samples by SERS. UiO-66/AuNPs suspension substrate was prepared for SERS-based determination of a carcinogenic heterocyclic amine in barbecue meat. UiO-66(NH₂)/AuNPs/Nylon-66 membrane substrate was fabricated for the simultaneous separation, enrichment, and in situ analysis of Sudan Red 7B in chilli products. The heterocyclic amine and Sudan dye in real samples could be detected and quantified with the recoveries of 82.3-110% and 84.5-114% and relative standard deviations (RSDs) of 3.1-11.0% and 1.9-5.6% (n = 3) by use of these two substrates, respectively. These two UiO-66/AuNPs based substrates combined molecular enrichment and SERS activity, achieving excellent analytical accuracy and widening SERS application in practical food safety analysis.

Three-dimensional porous SERS powder for sensitive liquid and gas detections fabricated by engineering dense "hot spots" on silica aerogel

A three-dimensional porous SERS powder material, Ag nanoparticles-engineered-silica aerogel, was developed. Utilizing an in situ chemical reduction strategy, Ag nanoparticles were densely assembled on porous aerogel structures, thus forming three-dimensional "hot spots" distribution with intrinsic large specific surface area and high porosity. These features can effectively enrich the analytes on the metal surface and provide huge near field enhancement. Highly sensitive and homogeneous SERS detections were achieved not only on the conventional liquid analytes but also on gas with the enhancement factor up to ∼10⁸ and relative standard deviation as small as ∼13%. Robust calibration curves were obtained from the SERS data, which demonstrates the potential for the quantification analysis. Moreover, the powder shows extraordinary SERS stability than the conventional Ag nanostructures, which makes long term storage and convenient usage feasible. With all of these advantages, the porous SERS powder material can be extended to on-site SERS "nose" applications such as liquid and gas detections for chemical analysis, environmental monitoring, and anti-terrorism.

Metal-semiconductor heterostructures for surface-enhanced Raman scattering: synergistic contribution of plasmons and charge transfer

After 45 years of its first observation, surface-enhanced Raman spectroscopy (SERS) has become an ultrasensitive tool applied in chemical analysis, materials science, and biomedical research. SERS-active nanomaterials, such as noble metals, transition metals, and semiconductors, have undergone extensive development. The hybridization of semiconductors with plasmonic metal nanomaterials is highly effective in boosting light harvesting and conversion, which enables the rapid growth of metal-semiconductor hybrid nanostructures in SERS-based research fields. With the combination of the unique photoelectric properties and giant SERS signals attributed to the synergistic contribution of plasmons and change transfer (CT), metal-semiconductor heterostructures allow diverse and novel applications of SERS in CT investigations for the rational design of photovoltaic devices and ultrasensitive chemical or biological sensing. In this review, we specifically discuss SERS-active metal-semiconductor heterostructures including their building blocks, enhancement mechanisms, and applications. Moreover, we highlight the current challenges and opportunities for future research in this field based on our recent studies and other related research.

In Situ Observation of Glucose Metabolism Dynamics of Endothelial Cells in Hyperglycemia with a Stretchable Biosensor: Research Tool for Bridging Diabetes and Atherosclerosis

Diabetes is a metabolic syndrome associated with hyperglycemia, hypertension, atherosclerosis, and endothelial dysfunction. Applying the mechanical stretch on cells to simulate blood circulation while monitoring the cell glucose metabolism in a high-glucose environment is important for better comprehension of the underlying mechanisms of atherosclerosis caused by diabetes. Herein, we developed a facile strategy integrating zeolitic imidazolate framework-8-encapsulated glucose oxidase (GOx@ZIF-8) and an gold (Au) stretchable electrode (Au SE) to construct a flexible and stretchable glucose sensor (GOx@ZIF-8/Au SE) for investigating the glucose metabolism mechanism of stretched endothelial cells in hyperglycemia. The encapsulation of GOx with ZIF-8 prevents the aggregation and detachment of GOx from the sensing interface and endows the biosensor with high stability. Additionally, the Au SE with inherent stretchability can act as an integrated platform for mechanical stimulation as well as for transient signal sensing during the mechanotransduction process. Moreover, this flexible and stretchable glucose sensor is successfully used for monitoring the glucose metabolism of mechanically stimulated cells in hyperglycemia, and it was found for the first time that the glucose utilization ability of cells under static conditions is higher than that in the stretched state. This facile and straightforward method paves a promising route for designing a stable enzyme-based stretchable biosensor for detecting the underlying mechanisms of atherosclerosis caused by diabetes.

Recent Advances in Metal Organic Frameworks Based Surface Enhanced Raman Scattering Substrates: Synthesis and Applications

Metal-organic frameworks (MOFs) are supramolecular nanomaterials, in which metal ions or clusters are connected by organic ligands to form crystalline lattices with highly ordered periodic porous network structure. MOFs have been widely applied in various fields, such as catalyst, sample preparation, and sensing. In recent years, MOFs based surface enhanced Raman scattering (SERS) substrates have attracted much attention since MOFs can largely improve the performance of metallic SERS substrates toward target enrichment and signal enhancement. MOFs have been exploited in SERS analysis to tackle some challenges that bare metal substrates cannot achieve. Combination of MOFs and SERS improved the sensitivity of traditional SERS analysis and extended the application scope of SERS. With the increasing exploration of MOFs based SERS substrates, there is a great demand to review the advances in these researches. Herein, this review concentrated on summarizing the preparation and applications of MOFs based SERS substrates. Representative researches were discussed to better understand the property of MOFs based SERS substrates. The advantages of MOFs based SERS substrates were highlighted, as well as their limitations. In addition, the challenges, opportunities, and future trends in MOFs based SERS analysis were tentatively discussed.

Development of affinity between target analytes and substrates in surface enhanced Raman spectroscopy for environmental pollutant detection

Environmental pollution has long been a social concern due to the variety of pollutants and their wide distribution, persistence and being detrimental to health. It is therefore necessary to develop rapid and sensitive strategies to trace and detect these compounds. Among various detection methodologies, surface enhanced Raman spectroscopy (SERS) has become an attractive option as it enables accurate analyte identification, simple sample preparation, rapid detection and ultra-high sensitivity without any interference from water. For SERS detection, an essential yet challenging step is the effective capture of target analytes onto the surface of metal nanostructures with a high intensity of enhanced electromagnetic field. This review has systematically summarized recent advances in developing affinity between targets and the surface of SERS substrates via direct adsorption, hydrophobic functional groups, boronate affinity, metal organic frameworks (MOFs), DNA aptamers and molecularly imprinted polymers (MIPs). At the end of this review, technical limitations and outlook have been provided, with suggestions on optimizing SERS techniques for real-world applications in environmental pollutant detection.

Understanding the Role of Metal-Organic Frameworks in Surface-Enhanced Raman Scattering Application

Metal-organic frameworks (MOFs), built from organic linkers and metal ions/clusters, have emerged as highly promising materials for wide applications. Combining highly porous crystalline MOFs with the surface-enhanced Raman scattering (SERS) technique can achieve unprecedented advantages of high selectivity, high sensitivity, and expedience in analysis and detection. In this critical review, the aim is to present a comprehensive review of recent advances in understanding of the roles of MOFs in MOF-SERS systems, particularly their structure-to-property correlation. Key examples are selected from representative literature to illustrate critical concepts and the MOF-based property-dependent applications are particularly emphasized. Finally, the barriers, future trends, and prospects for further advances in MOF-SERS platforms are also discussed.