Flow Cytometric Analysis To Detect Pathogens in Bacterial Cell Mixtures Using Semiconductor Quantum Dots

Theranostics applications of quantum dots in regenerative medicine, cancer medicine, and infectious diseases

Quantum dots (QDs) have attracted attention for their application and commercialization in all industrial fields, including communications, displays, and solar cells, due to their excellent optical properties based on the quantum size effect. In recent years, the development of QDs that do not contain cadmium which is toxic to cells and living organisms, has progressed, and they have attracted considerable attention in the bio-imaging field for targeting molecules and cells. Furthermore, recently, the need for diagnostics and treatment at the single molecule and single cell level in the medical field has been increasing, and the application of QDs in the medical field is also accelerating. Therefore, this paper outlines the frontiers of diagnostic and therapeutic applications (theranostics) of QDs, especially in advanced medical fields such as regenerative medicine, oncology, and infectious diseases.

Novel next generation sequencing panel method for the multiple detection and identification of foodborne pathogens in agricultural wastewater

Detecting and identifying the origins of foodborne pathogen outbreaks is a challenging. The Next-Generation Sequencing (NGS) panel method offers a potential solution by enabling efficient screening and identification of various bacteria in one reaction. In this study, new NGS panel primer sets that target 18 specific virulence factor genes from six target pathogens (Bacillus cereus, Yersinia enterocolitica, Staphylococcus aureus, Vibrio cholerae, Vibrio parahaemolyticus, and Vibrio vulnificus) were developed and optimized. The primer sets were validated for specificity and selectivity through singleplex PCR, confirming the expected amplicon size. Crosscheck and multiplex PCR showed no interference in the primer set or pathogenic DNA mixture. The NGS panel analysis of spiked water samples detected all 18 target genes in a single reaction, with pathogen concentrations ranging from 10⁸ to 10⁵ colony-forming units (CFUs) per target pathogen. Notably, the total sequence read counts from the virulence factor genes showed a positive association with the CFUs per target pathogen. However, the method exhibited relatively low sensitivity and occasional false positive results at low pathogen concentrations of 10⁵ CFUs. To validate the detection and identification results, two sets of quantitative real-time PCR (qPCR) analyses were independently performed on the same spiked water samples, yielding almost the same efficiency and specificity compared to the NGS panel analysis. Comparative statistical analysis and Spearman correlation analysis further supported the similarity of the results by showing a negative association between the NGS panel sequence read counts and qPCR cycle threshold (Ct) values. To enhance NGS panel analysis for better detection, optimization of primer sets and real-time NGS sequencing technology are essential. Nonetheless, this study provides valuable insights into applying NGS panel analysis for multiple foodborne pathogen detection, emphasizing its potential in ensuring food safety.

Nanotechnology in Food and Plant Science: Challenges and Future Prospects

Globally, food safety and security are receiving a lot of attention to ensure a steady supply of nutrient-rich and safe food. Nanotechnology is used in a wide range of technical processes, including the development of new materials and the enhancement of food safety and security. Nanomaterials are used to improve the protective effects of food and help detect microbial contamination, hazardous chemicals, and pesticides. Nanosensors are used to detect pathogens and allergens in food. Food processing is enhanced further by nanocapsulation, which allows for the delivery of bioactive compounds, increases food bioavailability, and extends food shelf life. Various forms of nanomaterials have been developed to improve food safety and enhance agricultural productivity, including nanometals, nanorods, nanofilms, nanotubes, nanofibers, nanolayers, and nanosheets. Such materials are used for developing nanofertilizers, nanopesticides, and nanomaterials to induce plant growth, genome modification, and transgene expression in plants. Nanomaterials have antimicrobial properties, promote plants' innate immunity, and act as delivery agents for active ingredients. Nanocomposites offer good acid-resistance capabilities, effective recyclability, significant thermostability, and enhanced storage stability. Nanomaterials have been extensively used for the targeted delivery and release of genes and proteins into plant cells. In this review article, we discuss the role of nanotechnology in food safety and security. Furthermore, we include a partial literature survey on the use of nanotechnology in food packaging, food safety, food preservation using smart nanocarriers, the detection of food-borne pathogens and allergens using nanosensors, and crop growth and yield improvement; however, extensive research on nanotechnology is warranted.

Future of Nanotechnology in Food Industry: Challenges in Processing, Packaging, and Food Safety

Over the course of the last several decades, nanotechnology has garnered a growing amount of attention as a potentially valuable technology that has significantly impacted the food industry. Nanotechnology helps in enhancing the properties of materials and structures that are used in various fields such as agriculture, food, pharmacy, and so on. Applications of nanotechnology in the food market have included the encapsulation and distribution of materials to specific locations, the improvement of flavor, the introduction of antibacterial nanoparticles into food, the betterment of prolonged storage, the detection of pollutants, enhanced storage facilities, locating, identifying, as well as consumer awareness. Labeling food goods with nano barcodes helps ensure their security and may also be used to track their distribution. This review article presents a discussion about current advances in nanotechnology along with its applications in the field of food-tech, food packaging, food security, enhancing life of food products, etc. A detailed description is provided about various synthesis routes of nanomaterials, that is, chemical, physical, and biological methods. Nanotechnology is a rapidly improving the field of food packaging and the future holds great opportunities for more enhancement via the development of new nanomaterials and nanosensors.

Development and Evaluation of a Next-Generation Sequencing Panel for the Multiple Detection and Identification of Pathogens in Fermented Foods

These days, bacterial detection methods have some limitations in sensitivity, specificity, and multiple detection. To overcome these, novel detection and identification method is necessary to be developed. Recently, NGS panel method has been suggested to screen, detect, and even identify specific foodborne pathogens in one reaction. In this study, new NGS panel primer sets were developed to target 13 specific virulence factor genes from five types of pathogenic Escherichia coli, Listeria monocytogenes, and Salmonella enterica serovar Typhimurium, respectively. Evaluation of the primer sets using singleplex PCR, crosscheck PCR and multiplex PCR revealed high specificity and selectivity without interference of primers or genomic DNAs. Subsequent NGS panel analysis with six artificially contaminated food samples using those primer sets showed that all target genes were multi-detected in one reaction at 10⁸-10⁵ CFU of target strains. However, a few false-positive results were shown at 10⁶-10⁵ CFU. To validate this NGS panel analysis, three sets of qPCR analyses were independently performed with the same contaminated food samples, showing the similar specificity and selectivity for detection and identification. While this NGS panel still has some issues for detection and identification of specific foodborne pathogens, it has much more advantages, especially multiple detection and identification in one reaction, and it could be improved by further optimized NGS panel primer sets and even by application of a new real-time NGS sequencing technology. Therefore, this study suggests the efficiency and usability of NGS panel for rapid determination of origin strain in various foodborne outbreaks in one reaction.

Flow cytometry-based rapid detection of Staphylococcus aureus and Pseudomonas aeruginosa using fluorescent antibodies

Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) are major pathogens frequently detected in food and beverage poisoning, and persistent infections. Therefore, the development of a rapid method that can detect these pathogens before serious multiplication is required. In this study, we established a flow cytometry (FCM)-based detection method that allows rapid acquisition of cell populations in fluid samples by using a fluorescent antibody against S. aureus or P. aeruginosa. Using this method, we detected these pathogens with a 10³ to 10⁵ CFU order of limit of detection value within 1 hour. The FCM-based method for the detection of S. aureus and P. aeruginosa offers the possibility of high-throughput analysis of pathogens in food, environmental, and clinical sources.

Thermodynamic and kinetic insights into the interactions between functionalized CdTe quantum dots and human serum albumin: A surface plasmon resonance approach

To explore in vivo application of quantum dots (QDs), it is essential to understand the dynamics and energetics of interactions between QDs and proteins. Here, surface plasmon resonance (SPR) and molecular docking were employed to investigate the kinetics and thermodynamics of interactions between human serum albumin (HSA) and CdTe QDs (~3 nm) functionalized with mercaptopropionic acid (MPA) or thioglycolic acid (TGA). Kinetic analysis showed that HSA-QD interactions involved transition-complex formation. Despite the structural similarities between MPA and TGA, the [HSA-CdTe@TGA]^‡ formation by association of free HSA and QDs demanded 70% more energy and higher entropic gain (E_a-TGA^‡= 65.10 and T∆S_a-TGA^‡= 28.62 kJ mol^-1) than the formation of [HSA-CdTe@MPA]^‡ (E_a-MPA^‡ = 38.13 and T∆S_a-MPA^‡ = 0.53kJ mol^-1). While the [HSA-CdTe@MPA]^° dissociation required higher energy and lower entropy loss (E_d-MPA^‡ = 49.96 and T∆S_d-MPA^‡ = - 32.18kJ mol^-1) than the [HSA-CdTe@TGA]^° dissociation (E_d-TGA^‡= 30.78 and T∆S_d-TGA^‡= - 51.12 kJ mol^-1). The stability of [HSA-QDs]^° was independent of the temperature and functionalizing group. However, the enthalpic and entropic components were highly affected by the substitution of MPA (ΔH° = - 11.83 and TΔS° = 32.72 kJ mol^-1) with TGA (ΔH° = 34.31 and TΔS° = 79.73 kJ mol^-1). Furthermore, molecular docking results indicated that the metal site on the QDs contributes to the stabilization of [HSA-QDs]^°. Therefore, differences in QD functionalization and surface coverage densities can alter the HSA-QD interaction, thus their application.

An Overview of the Applications of Nanomaterials and Nanodevices in the Food Industry

The efficient progress in nanotechnology has transformed many aspects of food science and the food industry with enhanced investment and market share. Recent advances in nanomaterials and nanodevices such as nanosensors, nano-emulsions, nanopesticides or nanocapsules are intended to bring about innovative applications in the food industry. In this review, the current applications of nanotechnology for packaging, processing, and the enhancement of the nutritional value and shelf life of foods are targeted. In addition, the functionality and applicability of food-related nanotechnologies are also highlighted and critically discussed in order to provide an insight into the development and evaluation of the safety of nanotechnology in the food industry.

Aptamer surface functionalization of microfluidic devices using dendrimers as multi-handled templates and its application in sensitive detections of foodborne pathogenic bacteria

A microfluidic system that incorporates both dendrimers and aptamers to detect E. coli O157:H7 is developed. To achieve this, generation 7-polyamidoamine dendrimers were immobilized onto the detection surfaces of PDMS microfluidic channels; subsequently aptamers against E. coli O157:H7 were conjugated onto the microchannel surfaces via the immobilized dendrimers as templates. Surface modifications were characterized by FTIR, XPS, water contact angles, fluorescence microscopy and AFM to confirm the success of each surface modification steps. The efficacy of this simple microchannel in detection was investigated using E. coli O157:H7 spiked samples. Our results showed that this interesting approach significantly increased the amount of aptamers available on the microfluidic channel surfaces to capture E. coli O157:H7 cells to allow sensitive detection, which in turn resulted in detections of E. coli O157:H7 cells at a low limit of detection of 10² cells mL^-1. The results also demonstrated that in comparison with the generation 4-polyamidoamine dendrimers (G4) modified microchannels, those modified with G7 showed enhanced detection signals, improved target capturing efficiencies, and at higher throughput. This simple whole cell detection design has not been reported in the literature and it is an interesting and effective approach to developing a sensitive and rapid detection platform for foodborne pathogenic bacteria.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Prospects of using nanotechnology for food preservation, safety, and security

The rapid development of nanotechnology has transformed many domains of food science, especially those that involve the processing, packaging, storage, transportation, functionality, and other safety aspects of food. A wide range of nanostructured materials (NSMs), from inorganic metal, metal oxides, and their nanocomposites to nano-organic materials with bioactive agents, has been applied to the food industry. Despite the huge benefits nanotechnology has to offer, there are emerging concerns regarding the use of nanotechnology, as the accumulation of NSMs in human bodies and in the environment can cause several health and safety hazards. Therefore, safety and health concerns as well as regulatory policies must be considered while manufacturing, processing, intelligently and actively packaging, and consuming nano-processed food products. This review aims to provide a basic understanding regarding the applications of nanotechnology in the food packaging and processing industries and to identify the future prospects and potential risks associated with the use of NSMs.

Single Upconversion Nanoparticle-Bacterium Cotrapping for Single-Bacterium Labeling and Analysis

Detecting and analyzing pathogenic bacteria in an effective and reliable manner is crucial for the diagnosis of acute bacterial infection and initial antibiotic therapy. However, the precise labeling and analysis of bacteria at the single-bacterium level are a technical challenge but very important to reveal important details about the heterogeneity of cells and responds to environment. This study demonstrates an optical strategy for single-bacterium labeling and analysis by the cotrapping of single upconversion nanoparticles (UCNPs) and bacteria together. A single UCNP with an average size of ≈120 nm is first optically trapped. Both ends of a single bacterium are then trapped and labeled with single UCNPs emitting green light. The labeled bacterium can be flexibly moved to designated locations for further analysis. Signals from bacteria of different sizes are detected in real time for single-bacterium analysis. This cotrapping method provides a new approach for single-pathogenic-bacterium labeling, detection, and real-time analysis at the single-particle and single-bacterium level.

Specific Single-Cell Isolation of Escherichia coli O157 from Environmental Water Samples by Using Flow Cytometry and Fluorescence-Activated Cell Sorting

Contamination of food and water with pathogenic bacteria is of concern. Although culture-independent detection and quantification of pathogens is useful, isolation of pathogenic bacteria is still important when identifying the sources of pathogens. Here, we report the use of flow cytometry (FCM) and fluorescence-activated cell sorting (FACS) to specifically detect and isolate individual Escherichia coli O157:H7 cells from water samples. When present at >10 cells/mL water, target pathogen was specifically detected and isolated. The FACS-sorted E. coli O157:H7 population reflected the original population diversity, in contrast to the populations obtained by immunomagnetic separation. Relative abundance of multiple pathogenic strains is important when performing source-tracking studies; therefore, single-cell isolation with FCM-FACS can be a useful tool to obtain pathogenic bacteria for source tracking purpose.

Exploitation of Nanotechnology for the Monitoring of Waterborne Pathogens: State-of-the-Art and Future Research Priorities

Contaminated drinking water is one of the most important environmental contributors to the human disease burden. Monitoring of water for the presence of pathogens is an essential part of ensuring drinking water safety. In order to assess water quality it is essential to have methods available to sample and detect the type, level and viability of pathogens in water which are effective, cheap, quick, sensitive, and where possible high throughput. Nanotechnology has the potential to drastically improve the monitoring of waterborne pathogens when compared to conventional approaches. To date, there have been no reviews that outline the applications of nanotechnology in this area despite increasing exploitation of nanotechnology for this purpose. This review is therefore the first overview of the state-of-the-art in the application of nanotechnology to waterborne pathogen sampling and detection schemes. Research in this field has been centered on the use of engineered nanomaterials. The effectiveness and limitations of nanomaterial-based approaches is outlined. A future outlook of the advances that are likely to emerge in this area, as well as recommendations for areas of further research are provided.

Bacterial detection with amphiphilic carbon dots

Amphiphilic carbon dots employed for detection and visualization of bacterial cells and distinguishing among different bacterial strains.

P-doped carbon dots act as a nanosensor for trace 2,4,6-trinitrophenol detection and a fluorescent reagent for biological imaging

A simple and rapid method for sensitive and selective detection of 2,4,6-trinitrophenol (TNP) was developed with the use of water-soluble carbon dots (CDs) as a nanosensor.

Biocompatibility of quantum dots (CdSe/ZnS ) in human amniotic membrane-derived mesenchymal stem cells in vitro

BACKGROUND AND AIM

Amniotic membrane-derived mesenchymal stem cells (hAM-dMSCs) are a potential source of mesenchymal stem cells which could be used to repair skin damage. The use of mesenchymal stem cells to repair skin damage requires safe, effective and biocompatible agents to evaluate the effectiveness of the result. Quantum dots (QDs) composed of CdSe/ZnS are semiconductor nanocrystals with broad excitation and narrow emission spectra, which have been considered as a new chemical and fluorescent substance for non-invasively labeling different cells in vitro and in vivo. This study investigated the cytotoxic effects of QDs on hAM-dMSCs at different times following labeling.

METHODS

Using 0.75, 1.5 and 3.0 μL between quantum dots, labeled human amniotic mesenchymal stem cells were collected on days 1, 2 and 4 and observed morphological changes, performed an MTT cell growth assay and flow cytometry for mesenchymal stem cells molecular markers.

RESULTS

Quantum dot concentration 0.75 μg/mL labeled under a fluorescence microscope, cell morphology was observed, The MTT assay showed cells in the proliferative phase. Flow cytometry expression CD29, CD31, CD34, CD44, CD90, CD105 and CD106.

CONCLUSIONS

Within a certain range of concentrations between quantum dots labeled human amniotic mesenchymal stem cells has good biocompatibility.

CORE-SIZE DEPENDENT PHOTOLUMINESCENCE BLINKING OF ISOLATED QUANTUM DOT-FULLERENE HYBRIDS

We demonstrate the possibility to bias the photoluminescence blinking of isolated colloidal quantum dots coupled to fullerenes by varying the quantum dot core size. Changing the core size affects the energy offset between the donor and acceptor and directly affects the driving force for electron transfer between the two moieties. Single particle photoluminescence measurements reveal dramatic reduction in the on-time associated with the photoluminescence blinking in quantum dot-fullerene hybrids when the quantum dot core size decreases, a manifestation associated with enhanced electron transfer.

[Formula: see text]Special Issue Comment: This project is about the blink properties of QDs in the presence of electron acceptor moieties and it connects with two articles from this Special Issue involving treatments when solving single molecules.1,2

Colorimetric detection of Escherichia coli O157:H7 using functionalized Au@Pt nanoparticles as peroxidase mimetics

The presence of Escherichia coli (E. coli) in food and drinking water is a chronic problem worldwide. Protecting food against bacterial contamination and rapid diagnosis of infection require simple and rapid assays for detection of bacterial pathogens, including E. coli O157:H7. Here we report a rapid and novel colorimetric method for detecting E. coli O157:H7. This colorimetric method is based on the catalytic oxidation of the peroxidase substrate 3,3,5,5-tetramethylbenzidine by hydrogen peroxide using 4-mercaptophenylboronic acid-functioned Au@Pt nanoparticles adsorbed on the surface of E. coli O157:H7. The assay showed excellent sensitivity both with the naked eye and based on absorbance measurements. The absorbance at 652 nm was proportional to the concentration of E. coli O157:H7 ranging from 7 to 6 × 10(6) cfu mL(-1) with a limit of detection of 7 cfu mL(-1). The total detection time was less than 40 min.

Recent advances in optical biosensors for environmental monitoring and early warning

The growing number of pollutants requires the development of innovative analytical devices that are precise, sensitive, specific, rapid, and easy-to-use to meet the increasing demand for legislative actions on environmental pollution control and early warning. Optical biosensors, as a powerful alternative to conventional analytical techniques, enable the highly sensitive, real-time, and high-frequency monitoring of pollutants without extensive sample preparation. This article reviews important advances in functional biorecognition materials (e.g., enzymes, aptamers, DNAzymes, antibodies and whole cells) that facilitate the increasing application of optical biosensors. This work further examines the significant improvements in optical biosensor instrumentation and their environmental applications. Innovative developments of optical biosensors for environmental pollution control and early warning are also discussed.

A dual-color flow cytometry protocol for the simultaneous detection of Vibrio parahaemolyticus and Salmonella typhimurium using aptamer conjugated quantum dots as labels

A sensitive, specific method for the collection and detection of pathogenic bacteria was demonstrated using quantum dots (QDs) as a fluorescence marker coupled with aptamers as the molecular recognition element by flow cytometry. The aptamer sequences were selected using a bacterium-based SELEX strategy in our laboratory for Vibrio parahaemolyticus and Salmonella typhimurium that, when applied in this method, allows for the specific recognition of the bacteria from complex mixtures including shrimp samples. Aptamer-modified QDs (QD-apt) were employed to selectively capture and simultaneously detect the target bacteria with high sensitivity using the fluorescence of the labeled QDs. The signal intensity is amplified due to the high photostability of QDs nanoparticles, resulting in improved sensitivity over methods using individual dye-labeled probes. This proposed method is promising for the sensitive detection of other pathogenic bacteria in food stuff if suitable aptamers are chosen. The method may also provide another potential platform for the application of aptamer-conjugated QDs in flow cytometry.

Dual channel detection of ultra low concentration of bacteria in real time by scanning FCS

We describe a novel method to detect very low concentrations of bacteria in water. Our device consists of a portable horizontal geometry small confocal microscope with large pinhole and a holder for cylindrical cuvettes containing the sample. Two motors provide a fast rotational and slow vertical motion of the cuvette so the device looks like a simplified flow cytometer without flow. To achieve high sensitivity the design has two detection channels. Bacteria are stained by two different nucleic acid dyes and excited with two different lasers. Data are analyzed with a correlation filter based on particle passage pattern recognition. The passage of a particle through the illumination volume is compared with a Gaussian pattern in both channels. The width of the Gaussian correlates with the time of passage of the particle so one particle is counted when the algorithm finds a match with a Gaussian in both channels. The concentration of particles in the sample is deduced from the total number of coincident hits and the total volume scanned. This portable setup provides higher sensitivity, low cost and it could have a wide use ranging from clinical applications to pollution monitors and water and air quality control.

Luminescent nanoparticles and their applications in the life sciences

Nanoparticles have recently emerged as an important group of materials used in numerous disciplines within the life sciences, ranging from basic biophysical research to clinical therapeutics. Luminescent nanoparticles make excellent optical bioprobes significantly extending the capabilities of alternative fluorophores such as organic dyes and genetically engineered fluorescent proteins. Their advantages include excellent photostability, tunable and narrow spectra, controllable size, resilience to environmental conditions such as pH and temperature, combined with a large surface for anchoring targeting biomolecules. Some types of nanoparticles provide enhanced detection contrast due to their long emission lifetime and/or luminescence wavelength blue-shift (anti-Stokes) due to energy upconversion. This topical review focuses on four key types of luminescent nanoparticles whose emission is governed by different photophysics. We discuss the origin and characteristics of optical absorption and emission in these nanoparticles and give a brief account of synthesis and surface modification procedures. We also introduce some of their applications with opportunities for further development, which could be appreciated by the physics-trained readership.

Multiplex competitive microbead-based flow cytometric immunoassay using quantum dot fluorescent labels

In answer to the ever-increasing need to perform the simultaneous analysis of environmental hazards, microcarrier-based multiplex technologies show great promise. Further integration with biofunctionalized quantum dots (QDs) creates new opportunities to extend the capabilities of multicolor flow cytometry with their unique fluorescence properties. Here, we have developed a competitive microbead-based flow cytometric immunoassay using QDs fluorescent labels for simultaneous detection of two analytes, bringing the benefits of sensitive, rapid and easy-of-manipulation analytical tool for environmental contaminants. As model target compounds, the cyanobacterial toxin microcystin-LR and the polycyclic aromatic hydrocarbon compound benzo[a]pyrene were selected. The assay was carried out in two steps: the competitive immunological reaction of multiple targets using their exclusive sensing elements of QD/antibody detection probes and antigen-coated microsphere, and the subsequent flow cytometric analysis. The fluorescence of the QD-encoded microsphere was thus found to be inversely proportional to target analyte concentration. Under optimized conditions, the proposed assay performed well within 30 min for the identification and quantitative analysis of the two environmental contaminants. For microcystin-LR and benzo[a]pyrene, dose-response curves with IC(50) values of 5 μg L(-1) and 1.1 μg L(-1) and dynamic ranges of 0.52-30 μg L(-1) and 0.13-10 μg L(-1) were obtained, respectively. Recovery was 92.6-106.5% for 5 types of water samples like bottled water, tap water, surface water and seawater using only filtration as sample pretreatment.

Quantum dots hold promise for early cancer imaging and detection

Despite all major breakthroughs in recent years of research concerning the complex events that lead to cancer expression and metastasis, we are not yet able to effectively treat cancer that has spread to vital organs. The various clinical phases originating from cancer diagnosis through treatment and prognosis require a comprehensive understanding of these events, to utilise pre-symptomatic, minimally invasive and targeted cancer management techniques. Current imaging modalities such as ultrasound, computed tomography, magnetic resonance imaging and gamma scintigraphy facilitate the pre-operative study of tumours, but they have been rendered unable to visualise cancer in early stages, due to their intrinsic limitations. The semiconductor nanocrystal quantum dots (QDs) have excellent photo-physical properties, and the QDs-based probes have achieved encouraging developments in cellular (in vitro) and in vivo molecular imaging. However, the same unique physical and chemical properties which renowned QDs attractive may be associated with their potentially catastrophic effects on living cells and tissues. There are critical issues that need to be further examined to properly assess the risks associated with the manufacturing and use of QDs in cancer management. In this review, we aim to describe the current utilisation of QDs as well as their future prospective to decipher and confront cancer.

Application of nanoparticles for the detection and sorting of pathogenic bacteria by flow-cytometry

In this paper we will describe a new developed contribution of fluorescence nano-crystal (q-dots) as a fluorescence label for detecting pathogenic bacteria by flow cytometry (FCM) and the use of nano-magnetic particles to improve bacterial sorting by Flow cytometry cell sorting (FACS).FCM or FACS systems are based upon single cell detection by light scatter and Immunofluorescence labeling signals. The common FACS systems are based upon single or dual excitation as excitation source both for light scatter parameters and for several fluorescence detectors. Hence, for multi-labeling detection, there is a need for fluorophores with broad excitation wave length and sharp emission bands. Moreover, such fluorophores should be with high fluorescence efficiency, stable, and available for bio-molecules conjugation. Q-dots benefit from practical features which meet those -criteria. We will describe the use of q-dots as fluorescence labels for specific conjugates against Bacillus anthracis spores and Yersinia pestis bacteria, which enable the specific detection of the different species. A specific and sensitive multiplex analysis procedure for both pathogens was achieved, with high sensitivity down to 10(3) bacteria per ml in the sample.Sorting bacteria by FACS has a tremendous advantage for sensitive and selective analysis and sorting of sub-populations. However it has always been a difficult task due to the fact that bacteria are small particles (usually 1-3 μm). For such small particles, light scatter signal is on the threshold level, and many positive events may be lost. Here we will present the development of a procedure for sorting of the gram negative bacteria Y. pestis from environment samples. We will show that the application of nano-magnetic particles, as a tool for the immunomagnetic labeling and separation of the bacteria, enables fast sorting in high and low bacterial concentration down to 10  (5) cfu/ml. The nano-metric physical size of the immunospecific labeling particles disguises them from the FACS detectors; hence the bacterial population becomes the major population as opposed to being "rare events population" when using standard micro-magnetic beads for pre-enrichment.The procedure of separation and collection of bacteria enables sensitive detection and characterization methods of bacteria from complex samples.

Nanobiotechnologies for the detection and reduction of pathogens

Advances in the manipulation of nanomaterials has permitted the development of nanobiotechnology with enhanced sensitivities and improved response times. Low levels of infection of the major pathogens require the need for sensitive detection platforms and the properties of nanomaterials make them suitable for the development of assays with enhanced sensitivity, improved response time and increased portability. Nanobiotechnologies focusing on the key requirements of signal amplification and pre-concentration for the development of sensitive assays for food-borne pathogen detection in food matrices will be described and evaluated. The potential that exists for the use of nanomaterials as antimicrobial agents will also be examined.

Rapid and ultrasensitive E. coli O157:H7 quantitation by combination of ligandmagnetic nanoparticles enrichment with fluorescent nanoparticles based two-color flow cytometry

A novel, fast and sensitive determination strategy for E. coli O157:H7 has been developed by combination of ligandmagnetic nanoparticles (LMNPs) enrichment with a fluorescent silica nanoparticles (FSiNPs) based two-color flow cytometry assay (LMNPs@FSiNPs-FCM). E. coli O157:H7 was first captured and enriched through the lectin concanavalin A (Con A) favored strong adhesion of E. coli O157:H7 to the mannose-conjugated magnetic nanoparticles. The enriched E. coli O157:H7 was further specially labeled with goat anti-E. coli O157:H7 antibody modified RuBpy-doped FSiNPs, and then stained with a nucleic acid dye SYBR Green I (SYBR-I). After dual-labeling with FSiNPs and SYBR-I, the enriched E. coli O157:H7 was determined using multiparameter FCM analysis. With this method, the detection sensitivity was greatly improved due to the LMNPs enrichment and the signal amplification of the FSiNPs labelling method. Furthermore, the false positives caused by aggregates of FSiNPs conjugates and nonspecific binding of FSiNPs to background debris could be significantly decreased. This assay allowed the detection of E. coli O157:H7 in PB buffer at levels as low as 7 cells mL(-1). The total assay time including E. coli O157:H7 sample enrichment and detection was less than 4 h. An artificially contaminated bottled mineral water sample with a concentration of 6 cells mL(-1) can be detected by this method. It is believed that the proposed method will find wide applications in biomedical fields demanding higher sensitive bacterial identification.

Cellular heterogeneity and live cell arrays

In the past decade, the tendency to move from a global, one-size-fits-all treatment philosophy to personalized medicine is based, in part, on the nuanced differences and sub-classifications of disease states. Our knowledge of these varied states stems from not only the ability to diagnose, classify, and perform experiments on cell populations as a whole, but also from new technologies that allow interrogation of cell populations at the individual cell level. Such departures from conventional thinking are driven by the recognition that clonal cell populations have numerous activities that manifest as significant levels of non-genetic heterogeneity. Clonal populations by definition originate from a single genetic origin so are regarded as having a high level of homogeneity as compared to genetically distinct cell populations. However, analysis at the single cell level has revealed a different phenomenon; cells and organisms require an inherent level of non-genetic heterogeneity to function properly, and in some cases, to survive. The growing understanding of this occurrence has lead to the development of methods to monitor, analyze, and better characterize the heterogeneity in cell populations. Following the trend of DNA- and protein microarrays, platforms capable of simultaneously monitoring each cell in a population have been developed. These cellular microarray platforms and other related formats allow for continuous monitoring of single live cells and simultaneously generate individual cell and average population data that are more descriptive and information-rich than traditional bulk methods. These technological advances have helped develop a better understanding of the intricacies associated with biological processes and afforded greater insight into complex biological systems. The associated instruments, techniques, and reagents now allow for highly multiplexed analyses, which enable multiple cellular activities, processes, or pathways to be monitored simultaneously. This critical review will discuss the paradigm shift associated with cellular heterogeneity, speak to the key developments that have lead to our better understanding of systems biology, and detail the future directions of the discipline (281 references).

Quantum dot technology in flow cytometry

The development of quantum dot (QD) technology represents one of the most dramatic advances in flow cytometry history, offering the opportunity for highly multiplexed experiments and allowing better resolution of dimly staining markers. Here, we guide users through the technical aspects of using QDs (including instrumentation and antibody conjugation), demonstrate why QDs are useful in multicolor flow cytometry, and describe some of the challenges investigators may face when adopting this technology.

High-resolution light microscopy using luminescent nanoparticles

This review presents recent progress in the development of the luminescent nanoparticles for confocal and multiphoton microscopy. Four classes of nanomaterials are discussed: (1) silica-based nanoparticles doped with fluorescent molecules, (2) gold nanoparticles, (3) semiconductor nanocrystals (quantum dots/rods), and (4) nanophosphors. Special considerations are given to recently developed imaging nanoprobes, such as (1) organically modified silica (ORMOSIL) nanoparticles doped with two-photon absorbing fluorophores, which exhibit aggregation-enhanced fluorescence (AEF), and (2) nanophosphors (ceramic nanoparticles containing luminescent lanthanoid ions). Advantages and disadvantages of every class of nanomaterials and their specific applications are briefly discussed.

Gold-coated polycarbonate membrane filter for pathogen concentration and SERS-based detection

A SERS-based method for the concentration and detection of Giardia lamblia cysts in finished drinking water is reported. In this method, samples are concentrated with a membrane filter and then cysts captured on the filter surface are labeled with immunogold SERS labels and quantified via Raman spectroscopy. Anodisc((R)) membrane filters, silver membrane filters, and electroless gold-coated polycarbonate track etched (PCTE) membrane filters were investigated for their compatibility with the SERS based detection strategy. The largest pore size Anodisc((R)) membrane commercially available was too small for the proposed method because they led to physical retention of immunogold. When silver membrane filters were employed, cysts were difficult to distinguish from nonspecifically bound labels and cyst recovery from distilled water samples was only approximately 12.3%. With gold-coated PCTE membranes, however, cysts were readily detectable and cyst recovery was approximately 95%. This Raman based method simplifies Giardia detection and has potential to be extended to the simultaneous detection of numerous pathogenic organisms. To our knowledge, this is the first report coupling the use of membrane filters for the concentration and detection of organisms from water samples with a SERS based detection strategy.