Luminescence Oxygen Sensor Based on a Ruthenium(II) Star Polymer Complex

Determination and Imaging of Small Biomolecules and Ions Using Ruthenium(II) Complex-Based Chemosensors

Luminescence chemosensors are one of the most useful tools for the determination and imaging of small biomolecules and ions in situ in real time. Based on the unique photo-physical/-chemical properties of ruthenium(II) (Ru(II)) complexes, the development of Ru(II) complex-based chemosensors has attracted increasing attention in recent years, and thus many Ru(II) complexes have been designed and synthesized for the detection of ions and small biomolecules in biological and environmental samples. In this work, we summarize the research advances in the development of Ru(II) complex-based chemosensors for the determination of ions and small biomolecules, including anions, metal ions, reactive biomolecules and amino acids, with a particular focus on binding/reaction-based chemosensors for the investigation of intracellular analytes' evolution through luminescence analysis and imaging. The advances, challenges and future research directions in the development of Ru(II) complex-based chemosensors are also discussed.

Porous matrix materials in optical sensing of gaseous oxygen

The review provides comparison of porous materials that act as a matrix for luminescent oxygen indicators. These include silica-gels, sol–gel materials based on silica and organically modified silica (Ormosils), aerogels, electrospun polymeric nanofibers, metal–organic frameworks, anodized alumina, and various other microstructured sensor matrices. The influence of material structure and composition on the efficiency of oxygen quenching and dynamic response times is compared and the advantages and disadvantages of the materials are summarized to give a guide for design and practical application of sensors with desired sensitivity and response time.

Polymer matrix: A good substrate material for oxygen probes used in pressure sensitive paints

Over the past few years, surface pressure measurement has fundamental importance in many areas, particularly, aerodynamic research. Conventional methods involve pressure taps, but due to the nature of these pressure taps, only pressure information of isolated points on model surface is available, which limit their applications in aerodynamics studies. Recently the newly developed approach, pressure sensitive paint (PSP) has revolutionized such pressure measurements and various PSP materials have been developed for aerodynamics research. Hence, the main focus of this review is to study the interactions of polymers with different oxygen probes and polymeric role as supporting material in the maturation of PSP. In this review, the selected PSP materials are categorically elucidated in terms of their advantages and limitations to give a fair insight about their applicability. Further, we have summarized and articulated such particular optical oxygen sensing materials either that have been used as PSP or have potential to be used as PSP materials.

Synthesis of europium(iii)-doped copper nanoclusters for electrochemiluminescence bioanalysis

We reported an electrochemiluminescence biosensing platform based on europium(iii)-doped copper nanoclusters that exhibited excellent analytical performances of high stability and enhanced intensity.

In Situ Monitoring of Fluorescent Polymer Brushes by Angle-Scanning Based Surface Plasmon Coupled Emission

Fluorescent polymers have attracted interest in many fields such as sensing, diagnostics, imaging, and organic electronic devices. Real-time techniques to monitor and understand the polymerization process are important for obtaining controllable fluorescence polymers. We present a new technique to in situ monitor the growth process of fluorescent polymer brushes by using angle-scanning based surface plasmon coupled emission (AS-SPCE) approach during electrochemically mediated atom-transfer radical polymerization. The polymer thickness was determined by modeling the location of SPCE emission angle(s) with theoretical calculation. The advantages of unique angle distribution patterns, thickness dependence and effective background rejection of AS-SPCE guarantee the success in the real-time investigation for controllable fabrication of fluorescent polymers.

Polystyrene Oxygen Optodes Doped with Ir(III) and Pd(II) meso-Tetrakis(pentafluorophenyl)porphyrin Using an LED-Based High-Sensitivity Phosphorimeter

This paper presents a gaseous oxygen detection system based on time-resolved phosphorimetry (time-domain), which is used to investigate O2 optical transducers. The primary sensing elements were formed by incorporating iridium(III) and palladium(II) meso-tetrakis(pentafluorophenyl)porphyrin complexes (IrTFPP-CO-Cl and PdTFPP) in polystyrene (PS) solid matrices. Probe excitation was obtained using a violet light-emitting diode (LED) (low power), and the resulting phosphorescence was detected by a high-sensitivity compact photomultiplier tube. The detection system performance and the preparation of the transducers are presented along with their optical properties, phosphorescence lifetimes, calibration curves and photostability. The developed lifetime measuring system showed a good signal-to-noise ratio, and reliable results were obtained from the optodes, even when exposed to moderate levels of O2. The new IrTFPP-CO-Cl membranes exhibited room temperature phosphorescence and moderate sensitivity: <τ0>/<τ21%> ratio of ≈6. A typically high degree of dynamic phosphorescence quenching was observed for the traditional indicator PdTFPP: <τ0>/<τ21%> ratio of ≈36. Pulsed-source time-resolved phosphorimetry combined with a high-sensitivity photodetector can offer potential advantages such as: (i) major dynamic range, (ii) extended temporal resolution (Δτ/Δ[O2]) and (iii) high operational stability. IrTFPP-CO-Cl immobilized in polystyrene is a promising alternative for O2 detection, offering adequate photostability and potentially mid-range sensitivity over Pt(II) and Pd(II) metalloporphyrins.

Luminescence-Based Optical Sensors Fabricated by Means of the Layer-by-Layer Nano-Assembly Technique

Luminescence-based sensing applications range from agriculture to biology, including medicine and environmental care, which indicates the importance of this technique as a detection tool. Luminescent optical sensors are required to be highly stable, sensitive, and selective, three crucial features that can be achieved by fabricating them by means of the layer-by-layer nano-assembly technique. This method permits us to tailor the sensors' properties at the nanometer scale, avoiding luminophore aggregation and, hence, self-quenching, promoting the diffusion of the target analytes, and building a barrier against the undesired molecules. These characteristics give rise to the fabrication of custom-made sensors for each particular application.

Meta-Alkoxy-Substituted Difluoroboron Dibenzoylmethane Complexes as Environment-Sensitive Materials

The optical properties of meta-alkoxy-substituted difluoroboron dibenzoylmethane dyes were investigated in solution and in the solid state. Meta-alkoxy substitution induced strong intramolecular charge transfer (ICT) from the oxygen-donating substituent to the halide and boron acceptors in the excited state, as compared to the π-π* transition that is observed with para-alkoxy substitution. The optical properties of para- and meta-substituted alkoxy boron dyes were evaluated by calculations, in dilute solution, and in solid-state films. When embedded in amorphous matrixes (e.g., PLA, PMMA, PS, cholesterol), all dyes showed fluorescence (F) and phosphorescence (P) emission. In this report, we show that meta-substitution resulted in enhanced solvatochromism and an increased phosphorescence-to-fluorescence ratio in solid-state films compared to analogous para-substituted samples. With enhanced phosphorescence intensity via the heavy-atom effect, iodo-substituted dyes were further studied in PLA-PEG nanoparticles. Oxygen calibrations revealed stronger phosphorescence and a greater oxygen-sensing range for the meta- versus para-alkoxy-substituted dyes, features that are important for oxygen-sensing materials design.

High sensitivity and accuracy dissolved oxygen (DO) detection by using PtOEP/poly(MMA-co-TFEMA) sensing film

Fluorinated acrylate polymer has received great interest in recent years due to its extraordinary characteristics such as high oxygen permeability, good stability, low surface energy and refractive index. In this work, platinum octaethylporphyrin/poly(methylmethacrylate-co-trifluoroethyl methacrylate) (PtOEP/poly(MMA-co-TFEMA)) oxygen sensing film was prepared by the immobilizing of PtOEP in a poly(MMA-co-TFEMA) matrix and the technological readiness of optical properties was established based on the principle of luminescence quenching. It was found that the oxygen-sensing performance could be improved by optimizing the monomer ratio (MMA/TFEMA=1:1), tributylphosphate(TBP, 0.05mL) and PtOEP (5μg) content. Under this condition, the maximum quenching ratio I0/I100 of the oxygen sensing film is obtained to be about 8.16, Stern-Volmer equation is I0/I=1.003+2.663[O2] (R(2)=0.999), exhibiting a linear relationship, good photo-stability, high sensitivity and accuracy. Finally, the synthesized PtOEP/poly(MMA-co-TFEMA) sensing film was used for DO detection in different water samples.

Synthetic methodologies and spatial organization of metal chelate dendrimers and star and hyperbranched polymers

The synthetic methodologies, physico-chemical peculiarities, properties, and structure of metal chelate dendrimers and star and hyperbranched polymers are considered.

Preparation and characterization of a luminescent carbon dots grafted CaSiO3:Eu3+ phosphor for ratiometric fluorescent oxygen sensing

In this work, we present a rapid, selective and highly sensitive sensor for the detection of oxygen based on ratiometric fluorescentcarbon dots (CDs) grafted CaSiO₃:Eu³⁺.

Saccharide-induced modulation of photoluminescence lifetime in microgels

Sugar-responsive microgels based on boronic acid derivative and incorporating [Ru(bpy)₃]²⁺ as a luminescent reporter, exhibit very long lifetimes and unusually high quantum yields, which decrease upon saccharide addition.

Tailoring Oxygen Sensitivity with Halide Substitution in Difluoroboron Dibenzoylmethane Polylactide Materials

The dual-emissive properties of solid-state difluoroboron β-diketonate-poly(lactic acid) (BF2bdkPLA) materials have been utilized for biological oxygen sensing. In this work, BF2dbm(X)PLA materials were synthesized, where X = H, F, Cl, Br, and I. The effects of changing the halide substituent and PLA polymer chain length on the optical properties in dilute CH2Cl2 solutions and solid-state polymer films were studied. These luminescent materials show fluorescence, phosphorescence, and lifetime tunability on the basis of molecular weight, as well as lifetime modulation via the halide substituent. Short BF2dbm(Br)PLA (6.0 kDa) and both short and long BF2dbm(I)PLA polymers (6.0 or 20.3 kDa) have fluorescence and intense phosphorescence ideal for ratiometric oxygen sensing. The lighter halide-dye polymers with hydrogen, fluorine, and chlorine substitution have longer phosphorescence lifetimes and can be utilized as ultrasensitive oxygen sensors. Photostability was also analyzed for the polymer films.

Oximated ruthenium tris-bipyridyl complex: synthesis and luminescent response specifically for ClO− in water containing multiple ions

A novel Ru(bpy)₃²⁺ complex capable of a selective response to ClO⁻ in pH 4–11 water in the presence of other anions and cations is reported.

Electrochemiluminescence sensor for dopamine with a dual molecular recognition strategy based on graphite-like carbon nitride nanosheets/3,4,9,10-perylenetetracarboxylic acid hybrids

Preparation of an ECL sensor and graphite-like carbon nitride nanosheets/3,4,9,10-perylenetetracarboxylic acid hybrids.

Organometallic polymers for electrode decoration in sensing applications

Macromolecules containing metals combine the processing advantages of polymers with the functionality offered by the metal centers. The developments in the area of electrochemical chemo/biosensors based on organometallic polymers are reviewed.

Charge-transfer excited states in phosphorescent organo-transition metal compounds: a difficult case for time dependent density functional theory?

A series of 17 platinum(ii) and iridium(iii) complexes have been investigated theoretically and experimentally to elucidate the charge-transfer character in emission from the lowest triplet state. TDDFT is found to be surprisingly accurate.

Optical methods for sensing and imaging oxygen: materials, spectroscopies and applications

We review the current state of optical methods for sensing oxygen. These have become powerful alternatives to electrochemical detection and in the process of replacing the Clark electrode in many fields. The article (with 694 references) is divided into main sections on direct spectroscopic sensing of oxygen, on absorptiometric and luminescent probes, on polymeric matrices and supports, on additives and related materials, on spectroscopic schemes for read-out and imaging, and on sensing formats (such as waveguide sensing, sensor arrays, multiple sensors and nanosensors). We finally discuss future trends and applications and summarize the properties of the most often used indicator probes and polymers. The ESI† (with 385 references) gives a selection of specific applications of such sensors in medicine, biology, marine and geosciences, intracellular sensing, aerodynamics, industry and biotechnology, among others.

Thermal-healable and shape memory metallosupramolecular poly(n-butyl acrylate-co-methyl methacrylate) materials

Thermal-induced shape memory and healing based on a metallosupramolecular polymer were realized.

Hybrid oxygen-responsive reflective Bragg grating platforms

Oxygen responsive sensor platforms were fabricated by pin printing tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) ([Ru(dpp)(3)](2+)) doped sols onto wavelength tuned reflective Bragg gratings. In an epi-luminescence configuration, these Bragg gratings (Gr) were designed to selectively reflect the O(2) responsive [Ru(dpp)(3)](2+) emission toward the detector to enhance the detected signal magnitude. The xerogel based sensors were formed onto (i) glass (XGl), (ii) directly on top of the grating (XGrGl), or (iii) on the glass substrate opposite the grating (XGlGr). The results show that all sensors exhibit linear, statistically equivalent O(2) sensitivities, and the XGrGl platform yields up to an 8-fold increase in relative detected analytical signal (RDAS) in comparison to the control (XGl) platform.

Platinum (II) Porphyrin-Containing Thermoresponsive Poly(N-isopropylacrylamide) Copolymer as Fluorescence Dual Oxygen and Temperature Sensor

A random copolymer, poly(NIPAAm-co-PtPorphyrin), consisting of N-isopropylacrylamide (NIPAAm) and platinum (II) porphyrin units, behaves as an optical dual sensor for oxygen and temperature. The dual sensor is designed by incorporating an oxygen-sensitive platinum (II) porphyrin (M1) into a temperature-sensitive polymer (PNIPAAm). The polymer exhibited low critical solution temperature (LCST) property at 31.5 °C. This LCST affected the polymer's aggregation status, which in turn affected the nanostructures, fluorescence intensities, and responses to dissolved oxygen. This enables the polymer to functionalize as a dual temperature and dissolved oxygen sensor. Oxygen response of the platinum (II) porphyrin probes in the polymer followed a two-site Stern-Volmer model, indicating the nonuniform distribution of the probes. The copolymer was used to preliminarily monitor the oxygen consumption of Escherichia coli (E. coli) bacteria. The results indicate a potential application of the polymer in biological fields.

On the causes of altered photophysics of luminescent metal complexes embedded in polymer hosts

A suite of luminescent Re(I) complexes has been prepared whose emissive properties are responsive to the probe's local environment. These complexes were embedded in a series of chemically similar polymers whose room temperature rigidity varied over a significant range. It is shown that the degree of local rigidity experienced by the embedded complexes significantly alters the observed emission in terms of both spectra and lifetime. Time resolved emission measurements show that the spectral shifts and lifetime complexity are correlated and track well the polymers' T(g) within the series. Fluorescence confocal microscopy did not show the presence of discrete domains, and thus, the environmental features responsible for the altered photophysics must be submicrometer in size.

Functional soft materials from metallopolymers and metallosupramolecular polymers

Synthetic polymers containing metal centres are emerging as an interesting and broad class of easily processable materials with properties and functions that complement those of state-of-the-art organic macromolecular materials. A diverse range of different metal centres can be harnessed to tune macromolecular properties, from transition- and main-group metals to lanthanides. Moreover, the linkages that bind the metal centres can vary almost continuously from strong, essentially covalent bonds that lead to irreversible or 'static' binding of the metal to weak and labile, non-covalent coordination interactions that allow for reversible, 'dynamic' or 'metallosupramolecular', binding. Here we review recent advances and challenges in the field and illustrate developments towards applications as emissive and photovoltaic materials; as optical limiters; in nanoelectronics, information storage, nanopatterning and sensing; as macromolecular catalysts and artificial enzymes; and as stimuli-responsive materials. We focus on materials in which the metal centres provide function; although they can also play a structural role, systems where this is solely their purpose have not been discussed.

New ratiometric optical oxygen and pH dual sensors with three emission colors for measuring photosynthetic activity in Cyanobacteria

Photosynthetic algae and cyanobacteria have been proposed for producing biofuels through a direct photoconversion process. To accelerate the efforts of discovering and screening microbes for biofuel production, sensitive and high throughput methods to measure photosynthetic activity need to be developed. Here we report the development of new ratiometric optical oxygen and pH dual sensors with three emission colors for measuring photosynthetic activities directly. The dual sensor system can measure oxygen (O(2)) generation and pH increase resulted from carbon dioxide (CO(2)) consumption simultaneously. The sensor was prepared by a copolymerization of three monomeric probes, an intra-reference probe (IRP) which does not respond to pH or O(2), a probe for pH sensing (pHS), and an O(2) probe for O(2) sensing (OS) with 2-hydroxyethyl methacrylate (HEMA) and acrylamide (AM). After polymerization, the three probes were chemically immobilized in an ion and O(2) permeable poly(2-hydroxyethyl methacrylate)-co-polyacrylamide (PHEMA-co-PAM) matrix. The resulted sensing films (membranes) exhibited three emission colors with well separated emission spectra, covering blue, green, and red emission windows, under 380 nm light excitation. Responses of the sensors to pH and dissolved O(2) were investigated in buffers and cyanobacterial cell cultures (Synechocystis sp. PCC 6803). In spite of the strong autofluorescence from cyanobacteria, the sensors were able to determine the pH values and dissolved O(2) concentrations accurately and reproducibly. The measured results using the optical sensors were well in accordance with measurements using electrodes with minimal experimental variations. The sensors were further applied for evaluation of photosynthetic activities of Synechocystis sp. PCC 6803 at the exponential and stationary phases. The results were consistent with biological observation that the photosynthetic activity in the exponential phase was higher than that in the stationary phase.