Reversible detection of heparin and other polyanions by pulsed chronopotentiometric polymer membrane electrode

Chronopotentiometric Nanopore Sensor Based on a Stimulus-Responsive Molecularly Imprinted Polymer for Label-Free Dual-Biomarker Detection

The development of sensors for detection of biomarkers exhibits an exciting potential in diagnosis of diseases. Herein, we propose a novel electrochemical sensing strategy for label-free dual-biomarker detection, which is based on the combination of stimulus-responsive molecularly imprinted polymer (MIP)-modified nanopores and a polymeric membrane chronopotentiometric sensor. The ion fluxes galvanostatically imposed on the sensing membrane surface can be blocked by the recognition reaction between the target biomarker in the sample solution and the stimulus-responsive MIP receptor in the nanopores, thus causing a potential change. By using two external stimuli (i.e., pH and temperature), the recognition abilities of the stimulus-responsive MIP receptor can be effectively modulated so that dual-biomarker label-free chronopotentiometric detection can be achieved. Using alpha fetoprotein (AFP) and prostate-specific antigen (PSA) as model biomarkers, the proposed sensor offers detection limits of 0.17 and 0.42 ng/mL for AFP and PSA, respectively.

Construction of a highly sensitive detection platform for heparin based on a "turn-off" cationic fluorescent dye

A highly sensitive detection platform for heparin was constructed via the utilization of a commercially available cationic fluorescent dye (cresyl violet acetate, CV) as a fluorescence probe. The electrostatic binding between CV and heparin quenched the fluorescence in 4-(2-hydroxyethyl)-1-piperazineethanesulfonic (HEPES) buffer solution (10 mM, pH 7.1). CV was highly selective towards heparin over other potential inferring substances. The detection limit of heparin detection was 5.19 ng/mL, and the linear working range was 0 ∼ 1 μg/mL in HEPES solution. In 1 % serum, the detection platform based on the fluorescence "turn-off" behavior of CV was also successfully constructed with a detection limit of 5.86 ng/mL in the linear range of 0 ∼ 0.8 μg/mL. Moreover, the CV-heparin complex was considered a potential sensor platform for the detection of protamine because of its stronger affinity for heparin and protamine.

Rapid environmentally benign label free detection of heparin using highly fluorescent N,S-CDs sensing probe through a turn-on mechanism

Heparin (HEP) is one of the oldest anticoagulant drugs that currently still in widespread clinical use. It lacks chromophore and not easily derivatized due to its hydrophilic nature. In this work we developed a green, selective, and sensitive fluorescence sensor for detection of HEP in its injection dosage forms. The sensor is composed of nitrogen and sulfur co-doped carbon quantum dots (N,S-CDs) semi quenched by Fe3+. The N,S-CDs were prepared using microwave assisted pyrolysis in 3.5 min and exhibited high emission at 425 nm after excitation at 350 nm with high quantum yield of 96%. Owing to the anionic nature of HEP, it could compete with N,S-CDs for Fe3+ complexation resulting in turning-on the quenched fluorescence. This fluorescence enhancement was linear over a concentration range between 6 and 20 μg/mL (R2 = 0.99) with a limit of detection of 1.41 µg/ml. The accuracy and precision of the proposed sensor were indicated by percentage recovery values between 98% -102% and %RSD less than 2, respectively. Furthermore, the proposed sensor was successfully applied for determination of HEP in injection dosage form. The developed sensor showed excellent greenness on analytical eco-scale (score 93%) and GAPI scale.

Trace-level chronopotentiometric detection in the presence of a high electrolyte background using thin-layer ion-selective polymeric membranes

We propose here a pulsed galvanostatic control of a solid-contact ion-selective electrode coupled with a thin-layer ion-exchanger free membrane, which allows chronopotentiometric trace-level ion detection with a high-interfering background in a rapid and reversible way.

Thin membrane-based potentiometric sensors for sensitive detection of polyions

A novel protocol for development of sensitive and rapid polymeric membrane polyion sensitive electrodes has been explored in this work. In contrast to the traditional polyion electrodes which usually have a sensing membrane thickness of 100∼200 μm, a thin membrane electrode with a membrane thickness of 5 μm is proposed to detect polyions. By using such thin membrane configuration, the diffusion of polyions from the organic boundary layer into the bulk of the membrane can be effectively blocked. The induced accumulation of polyions in the membrane boundary layer largely enhances the obtained potential response. It has been found that the proposed electrode shows a remarkably improved sensitivity and measurement time over conventional potentiometric polyion sensors based on the thick membranes. By using protamine as a model of polyions, the new concept offers a detection limit nearly two orders of magnitude lower than those obtained by the traditional thick-membrane polyion electrodes for potentiometric measurements of polyions. The proposed polyion sensing platform offers great promise in the sensitive and rapid detection of polyions as well as other polyion-involved bioanalyses.

AIE-MOF materials for biological applications

Metal-Organic Frameworks (MOFs), coming under the realm of coordination chemistry, are unparalleled and the most studied among the group of porous materials. Structurally, these are well-defined three-dimensional crystalline products that can be tuned for various potential applications with a range of physico-chemical properties. More recently, aggregation-induced emission (AIE) and AIE of MOF material has attracted tremendous attention due to promising applications in biology. However, a chapter summarizing the work in AIE-MOFs materials has never been reported till date. A comprehensive review on the AIE and MOFs separately is beyond the reach of this chapter. Hence, we have summarized overview of recent developments in the syntheses and biological applications such as cell imaging, heparin detection, and drug delivery. In the end, conclusion, prospects and challenges in the arena of AIE-MOF materials are also highlighted.

Translating potentiometric detection into non-enzymatic amperometric measurement of H2O2

The developments of alternative signal readout strategies for the ion-selective electrodes (ISEs) are necessary in order to break through the limitation of the Nernst equation. In this work, a simple, convenient and easily operated strategy based on the non-enzymatic amperometric measurement of H₂O₂ is proposed to read out the potentiometric responses for the ISEs. The proposed amperometric signal readout based on H₂O₂ is carried out in a two compartment electrochemical cell configuration containing a detection cell and a sample cell, physically connected by a salt bridge. A glassy carbon (GC) electrode is placed in the detection cell to monitor the oxidation current of H₂O₂, and an ISE is placed in the sample cell to act as both the reference electrode and the potentiometric sensor for obtaining the ion activities. The oxidation of H₂O₂ is induced by a constant potential applied between the GC electrode and the ISE, and subsequently modulated by the potential change of the ISE in the presence of the primary ion. The proposed amperometric signal readout based on H₂O₂ shows the satisfied slope sensitivity and detection limit, which are better than or compared to those for the potentiometric responses for the ISEs. This work provides a general strategy for transforming the potential response of the ISEs into the amperometric readout, and is promising for detection of cations (eg., Ca²⁺) and anions (eg., NO₃^-) with high sensitivity and excellent selectivity.

Quantitative determination of dextran sulfate and pentosan polysulfate and their binding with protamine using chronopotentiometry with polyion-selective electrodes

We report for the first time a chronopotentiometric measurement of polyanions based on localized ion depletion at the sample/membrane interface at a characteristic transition time τ, using polymer membrane polyanion-selective electrodes. Chronopotentiometric transduction of polyions based on the measurement of transition time has analytically more attractive applications compared to the controlled-current reversible pulsed chronopotentiometric transduction based on electromotive force (emf) measurement. This is because traditional polyion-selective electrodes based on emf measurement intrinsically give nonlinear (sigmoidal) calibration curves. While these can be used for indirect determination of polyions via polyanion-polycation titrations, they are not convenient for direct quantitation. However, under chronopotentiometric measurement based on the measurement of transition time, the square root of the transition time τ is linearly related to the concentration of the polyion according to the Sand equation and can be used for a direct calibration-free rapid determination. In this work, we have measured the concentrations of dextran sulfate (DS) and pentosan polysulfate (PPS) using polyanion selective electrodes under chronopotentiometric method where the transition time was measured and controlled-current pulsed chronopotentiometric transductions, where the phase boundary potential (emf) was measured. In addition, the protamine-DS and the protamine-PPS binding ratios have been determined using both transductions. The protamine-PPS binding ratio was determined to be 1.51:1 by the titration method and 1.54:1 by chronopotentiometry. The protamine-DS binding ratio was determined to be 1.37:1 by the titration method and 1.41:1 by chronopotentiometry, showing excellent agreement between the two methods. These simple measurement methods of binding ratios between polysaccharides and polypeptides may become important tools for screening safer and more reliable antidotes for the newer and safer anticoagulants such as Low Molecular Weight Heparins(LMWHs) and also to determine the dosages of antidotes needed to neutralize the anticoagulant activity.

A colorimetric and fluorometric based dual readout approach for effective heparin sensing

Devising fluorescence-based turn-on probes for the specific and sensitive detection of Heparin is of utmost clinical importance. In this contribution, we have identified a molecular rotor based asymmetric cyanine probe, thiazole orange (TO), which enables an efficient colorimetric and fluorimetric detection of Heparin. TO undergoes the formation of emissive H-aggregates upon interaction with Heparin that display an impressive emission enhancement of ~22 fold together with drastic changes in the absorption spectra that yields a prominent colour change in the solution from orange to yellow. These seldom reported emissive H-aggregates of TO, serve as an efficient platform for Heparin detection with a LOD of 19 nM, fluorometrically and 34 nM, colorimetrically. The TO-Heparin complex is also accompanied by a large change in the excited-state lifetime. The TO-Heparin complex has been further utilized for the detection of Protamine, which is the only medically affirmed antitoxin of Heparin. Overall, our sensing system offers several advantages, such as, simple, dual read-out, economic and specific detection of Heparin with longer excitation and emission wavelength, rapid naked eye detection and utilizes an in-expensive commercially available fluoprophore, TO. Most importantly, our sensing system also displays a good performance in the biologically complex human serum matrix.

Fabrication of Orange-Emitting Organic Nanoparticle-Protamine Conjugate: Fluorimetric Sensor of Heparin

Among the diverse sensing techniques, fluorimetric detection dominates over the other methods because of its rapid signaling, high selectivity and sensitivity, and operational simplicity. This present article delineates fabrication of a fluorescent organic nanoparticle-protamine (FONP-Pro) conjugate for selective and sensitive detection of heparin simply by exploitation of the aggregation-induced emission (AIE) property of the FONPs. Naphthalene diimide-based bola-type amphiphilic molecules (NDI-1) comprise a naphthyl residue and a 3-aminopyridyl unit at both terminals, forming organic nanoparticles in a dimethyl sulfoxide-water binary solvent mixture, and exhibited AIE through excimer formation. The presence of naphthyl residue in the molecular backbone facilitates the intramolecular charge transfer to generate orange-emitting (λ_em = 594 nm) AIE-luminogen (AIE-gen). The aminopyridine residues within NDI-1 induced negative surface charge on NDI-1 FONPs, which facilitated interaction with positively charged protamine (Pro) to construct FONP-Pro conjugates. Formation of this NDI-1 FONP-Pro conjugate through the interaction between Pro and FONP drastically reduced the orange emission intensity (fluorescence off) of the AIE-gens. Interestingly, addition of heparin to this FONP-Pro conjugate turned on the fluorescence signal of FONPs through unwinding of the Pro from the FONP surface because of a strong binding affinity between heparin and Pro. Formation of the FONP-Pro conjugate and fluorimetric sensing of heparin was investigated by monitoring the change in emission behavior of NDI-1 FONPs. Also, the heparin-sensing was found to be highly selective against many other biomolecules including proteins, enzymes, and DNA. Hence, a selective and efficient heparin sensor (FONP-Pro) was developed having a limit of detection of 12 nM simply by utilizing the fluorescence "turn-off" and "turn-on" mechanism of NDI-1 FONP.

Facile synthesis of near-infrared emitting dBSA-templated Cu nanoclusters for sensitive detection of heparin

The near-infrared emitting dBSA-Cu NCs were synthesized through a facile synthesis route and were applied for ultra-sensitive detection of heparin in human plasma.

In situ formation of SERS hot spots by a bis-quaternized perylene dye: a simple strategy for highly sensitive detection of heparin over a wide concentration range

We have demonstrated a simple SERS assay for the sensitive detection of heparin by means of an in situ hot spot assembly method.

Manual and Flow-Injection Detection/Quantification of Polyquaterniums via Fully Reversible Polyion-Sensitive Polymeric Membrane-Based Ion-Selective Electrodes

The detection of four different polyquaterniums (PQs) using a fully reversible potentiometric polyion sensor in three different detection modes is described. The polyion sensing "pulstrodes" serve as the detector for direct dose-response experiments, beaker titrations, and in a flow-injection analysis (FIA) system. Direct polycation response toward PQ-2, PQ-6, PQ-10, and poly(2-methacryloxyethyltrimethylammonium) chloride (PMETAC) yields characteristic information about each PQ species (e.g., relative charge densities, etc.) via syringe pump addition of each PQ species to a background electrolyte solution. Quantitative titrations are performed using a syringe pump to deliver heparin as the polyanion titrant to quantify all four PQs at μg/mL levels. Both the direct and indirect methods incorporate the use of a three-electrode system including counter, double junction reference, and working electrodes. The working electrode possesses a plasticized poly(vinyl chloride) (PVC) membrane containing the neutral lipophilic salt of dinonylnaphthalenesulfonate (DNNS^-) tridodecylmethylammonium (TDMA⁺). Further, the titration method is shown to be useful to quantify PQ-6 levels in recreational swimming pool water collected in Ann Arbor, MI. Finally, a FIA system equipped with a pulstrode detector is used to demonstrate the ability to potentially quantify PQ levels via a more streamlined and semiautomated testing platform.

Sensing Active Heparin by Counting Aggregated Quantum Dots at Single-Particle Level

Developing highly sensitive and highly selective assays for monitoring heparin levels in blood is required during and after surgery. In previous studies, electrostatic interactions are exploited to recognize heparin and changes in light signal intensity are used to sense heparin. In the present study, we developed a quantum dot (QD) aggregation-based detection strategy to quantify heparin. When cationic micelles and fluorescence QDs modified with anti-thrombin III (AT III) are added into heparin sample solution, the AT III-QDs, which specifically bind with heparin, aggregate around the micelles. The aggregated QDs are recorded by spectral imaging fluorescence microscopy and differentiated from single QDs based on the asynchronous process of blue shift and photobleaching. The ratio of aggregated QD spots to all counted QD spots is linearly related to the amount of heparin in the range of 4.65 × 10 ^-4 U/mL to 0.023 U/mL. The limit of detection is 9.3 × 10 ^-5 U/mL (∼0.1 nM), and the recovery of the spiked heparin at 0.00465 U/mL (∼5 nM) in 0.1% human plasma is acceptable.

Highly selective and sensitive detection of heparin based on competition-modulated assembly and disassembly of fluorescent gold nanoclusters

A simple and economical fluorescence assay for heparin using glutathione-protected gold nanoclusters via competitive binding was developed.

Emissive H-Aggregates of an Ultrafast Molecular Rotor: A Promising Platform for Sensing Heparin

Constructing "turn on" fluorescent probes for heparin, a most widely used anticoagulant in clinics, from commercially available materials is of great importance, but remains challenging. Here, we report the formation of a rarely observed emissive H-aggregate of an ultrafast molecular rotor dye, Thioflavin-T, in the presence of heparin, which provides an excellent platform for simple, economic and rapid fluorescence turn-on sensing of heparin. Generally, H-aggregates are considered as serious problem in the field of biomolecular sensing, owing to their poorly emissive nature resulting from excitonic interaction. To the best of our knowledge, this is the first report, where contrastingly, the turn-on emission from the H-aggregates has been utilized in the biomolecule sensing scheme, and enables a very efficient and selective detection of a vital biomolecule and a drug with its extensive medical applications, i.e., heparin. Our sensor system offers several advantages including, emission in the biologically advantageous red-region, dual sensing, i.e., both by fluorimetry and colorimetry, and most importantly constructed from in-expensive commercially available dye molecule, which is expected to impart a large impact on the sensing field of heparin. Our system displays good performance in complex biological media of serum samples. The novel Thioflavin-T aggregate emission could be also used to probe the interaction of heparin with its only clinically approved antidote, Protamine.

Pharmacology of Heparin and Related Drugs

Heparin has been recognized as a valuable anticoagulant and antithrombotic for several decades and is still widely used in clinical practice for a variety of indications. The anticoagulant activity of heparin is mainly attributable to the action of a specific pentasaccharide sequence that acts in concert with antithrombin, a plasma coagulation factor inhibitor. This observation has led to the development of synthetic heparin mimetics for clinical use. However, it is increasingly recognized that heparin has many other pharmacological properties, including but not limited to antiviral, anti-inflammatory, and antimetastatic actions. Many of these activities are independent of its anticoagulant activity, although the mechanisms of these other activities are currently less well defined. Nonetheless, heparin is being exploited for clinical uses beyond anticoagulation and developed for a wide range of clinical disorders. This article provides a "state of the art" review of our current understanding of the pharmacology of heparin and related drugs and an overview of the status of development of such drugs.

Detecting Levels of Polyquaternium-10 (PQ-10) via Potentiometric Titration with Dextran Sulphate and Monitoring the Equivalence Point with a Polymeric Membrane-Based Polyion Sensor

Polymeric quaternary ammonium salts (polyquaterniums) have found increasing use in industrial and cosmetic applications in recent years. More specifically, polyquaternium-10 (PQ-10) is routinely used in cosmetic applications as a conditioner in personal care product formulations. Herein, we demonstrate the use of potentiometric polyion-sensitive polymeric membrane-based electrodes to quantify PQ-10 levels. Mixtures containing both PQ-10 and sodium lauryl sulfate (SLS) are used as model samples to illustrate this new method. SLS is often present in cosmetic samples that contain PQ-10 (e.g., shampoos, etc.) and this surfactant species interferes with the polyion sensor detection chemistry. However, it is shown here that SLS can be readily separated from the PQ-10/SLS mixture by use of an anion-exchange resin and that the PQ-10 can then be titrated with dextran sulphate (DS). This titration is monitored by potentiometric polyanion sensors to provide equivalence points that are directly proportional to PQ-10 concentrations.

A "turn on" fluorescent probe for heparin and its oversulfated chondroitin sulfate contaminant

Designing "turn on" fluorescent probes for heparin (Hep), a widely used anticoagulant in clinics, is of great importance but remains challenging. By introducing a Hep specific binding peptide AG73 to a typical aggregation induced emission (AIE) fluorogen, tetraphenylethene (TPE), a sensitive and selective "turn on" fluorescent probe named TPE-1 for Hep was developed. TPE-1 was able to detect Hep in a wide pH range of 3-10 without obvious interference from tested anions and biomolecules, especially Hep analogues known as chondroitin sulfate (Chs) and hyaluronic acid (HA). The detection limit of Hep sensing was 3.8 ng mL-1, which was far below the clinically demanded concentration of Hep. The probe was applicable to both unfractionated Hep and low molecular weight Hep, the two main heparin products clinically used. Besides, the fluorescence of Hep bound TPE-1 can be turned off via sequential treatment with heparinases. Importantly, this phenomenon allows us to develop an enzyme assisted strategy for "turn on" sensing of oversulfated chondroitin sulfate (OSCS) with a detection limit of 0.001% (w%), which is the main contaminant in Hep and may cause severe adverse reactions including death.

DNA Nanostructure-Based Magnetic Beads for Potentiometric Aptasensing

In this work, a simple, general, and sensitive potentiometric platform is presented, which allows potentiometric sensing to be applied to any class of molecule irrespective of the analyte charge. DNA nanostructures are self-assembled on magnetic beads via the incorporation of an aptamer into a hybridization chain reaction. The aptamer-target binding event leads to the disassembly of the DNA nanostructures, which results in a dramatic change in the surface charge of the magnetic beads. Such a surface charge change can be sensitively detected by a polycation-sensitive membrane electrode using protamine as an indicator. With an endocrine disruptor bisphenol A as a model, the proposed potentiometric method shows a wide linear range from 0.1 to 100 nM with a low detection limit of 80 pM (3σ). The proposed sensing strategy will lay a foundation for the development of potentiometric sensors for highly sensitive and selective detection of various targets.

Quantitative determination of fucoidan using polyion-sensitive membrane electrodes

The use of polyanion and polycation-sensitive membrane electrodes to detect five different preparations of fucoidan is described. Unlike linear polyanionic molecules previously measured with polymer membrane-based electrochemical sensors, fucoidans from marine brown algae are all highly branched, sulfated polysaccharides with varying charge densities and structures, depending on the species of seaweed, method of extraction used and extent of purification. When tridodecylmethylammonium (TDMA) was used as the ion-exchanger, a large, non-equilibrium EMF response was observed over a concentration range of 0.5-50 μg mL(-1) fucoidan. Fucoidan was also measured by titration with polycationic protamine, using a dinonylnaphthalene sulfonate (DNNS)-doped membrane electrode as the potentiometric endpoint detector. Potentiometric titration was used to determine the binding ratio between protamine and fucoidan at the neutralization endpoint for each fucoidan preparation. This binding ratio was then used to successfully determine the fucoidan content of commercially available nutritional supplements. Fucoidan was also measured in undiluted blood serum, demonstrating that this method may be applicable for measuring fucoidan for clinical applications.

Resonance Rayleigh scattering detection of heparin with concanavalin A

Stepwise macromolecular interactions observed between conA and heparin, which are accompanied by RRS changes.

Polyion selective polymeric membrane-based pulstrode as a detector in flow-injection analysis

A method for the detection of polyions using fully reversible polyion selective polymeric membrane type pulstrodes as detectors in a flow-injection analysis (FIA) system is examined. The detection electrode consists of a plasticized polymeric membrane doped with 10 wt % of tridodecylmethylammonium-dinonylnaphthalene sulfonate (TDMA/DNNS) ion-exchanger salt. The pulse sequence used involves a short (1 s) galvanostatic pulse, an open-circuit pulse (0.5 s) during which the EMF of the cell is measured, and a longer (15 s) potentiostatic pulse to return the membrane to its original chemical composition. It is shown that total pulse sequence times can be optimized to yield reproducible real-time detection of injected samples of protamine and heparin at up to 20 samples/h. Further, it is shown that the same membrane detector can be employed for FIA detection of both polycations at levels ≥10 μg/mL and polyanions at levels of ≥40 μg/mL by changing the direction of the galvanostatic pulse. The methodology described may also be applicable in the detection of polyionic species at low levels in other flowing configurations, such as in liquid chromatography and capillary electrophoresis.

Glucose-sensitive polyelectrolyte nanocapsules based on layer-by-layer technique for protein drug delivery

The glucose-responsive nanocapsules [CS-NAC/p(GAMA-r-AAPBA)] were readily fabricated with modified chitosan (CS-NAC) and random glycopolymer poly(D-gluconamidoethyl methacrylate-r-3-acrylamidophenylboronic acid) p(GAMA-r-AAPBA) as the alternant multilayered polyelectrolyte hybrid shell via layer-by-layer self-assembly after etching the amino functionalized SiO2 spheres by NH4F/HF. The spherical and hollow structure of nanocapsules was confirmed by TEM analysis and there was no clear collapse found after removal of the sacrificial cores. The reversible zeta potential changes of the nanocapsule materials evaluated the reversible glucose sensitivity. Besides, this system demonstrated a good capacity for encapsulation and loading insulin entrapped in nanocapsules as model protein drug. A good biocompatibility of the material was confirmed by the cell viability. In vitro release of insulin experiments revealed that no obvious release was found in acidic condition and the release could be normally conducted at physiological pH. These results implied that it was feasible for nanocapsules to be used in controlled release drug delivery system.

Highly sensitive surface-enhanced Raman scattering sensing of heparin based on antiaggregation of functionalized silver nanoparticles

We report a simple and sensitive surface-enhanced Raman scattering (SERS) platform for the detection of heparin, based on antiaggregation of 4-mercaptopyridine (4-MPY) functionalized silver nanoparticles (Ag NPs). Here, protamine was employed as a medium for inducing the aggregation of negatively charged 4-MPY functionalized Ag NPs through surface electrostatic interaction, which resulted in significantly enhanced Raman signal of the Raman reporter. However, in the presence of heparin, the interaction between heparin and protamine decreased the concentration of free protamine, which dissipated the aggregated 4-MPY functionalized Ag NPs and thus decreased Raman enhancement effect. The degree of aggregation and Raman enhancement effect was proportional to the concentration of added heparin. Under optimized assay conditions, good linear relationship was obtained over the range of 0.5-150 ng/mL (R(2) = 0.998) with a minimum detectable concentration of 0.5 ng/mL in standard aqueous solution. Furthermore, the developed method was also successfully applied for detecting heparin in fetal bovine serum samples with a linear range of 1-400 ng/mL.

pH-independent optical sensing of heparin based on ionic liquid-capped gold nanoparticles

A simple pH-independent optical method for the sensing of heparin, as a biomedically important polyionic drug, based on aggregation of gold nanoparticles (AuNPs) is described. The polyanionic heparin induces the aggregation of positively charged ionic liquid stabilized AuNPs, which results in a shift in the surface plasmon band and a consequent color change of the AuNPs from red to blue. The color change was monitored using UV-vis spectrophotometry and image analysis methods. The aggregation was confirmed by transmission electron microscopic measurements. The degree of aggregation was found to be proportional to the concentration of the added heparin, allowing its quantitative detection. The change in the absorbance and color-value has been used to monitor the concentration of heparin. This optical method can quantify heparin as low as 0.010 μg mL(-1) and the calibration is linear for a wide range of concentration.