Determination of disulfide bonds in highly bridged disulfide-linked peptides by matrix-assisted laser desorption/ionization mass spectrometry with postsource decay

EThcD Benefits for the Sequencing Inside Intramolecular Disulfide Cycles of Amphibian Intact Peptides

Disulfide bonds formed by a pair of cysteine residues in the peptides' backbone represent a certain problem for their sequencing by means of mass spectrometry. As a rule, in proteomics, disulfide bonds should be cleaved before the analysis followed by some sort of chemical derivatization. That step is time-consuming and may lead to losses of minor peptides of the analyzed mixtures due to incomplete reaction, adsorption on the walls of the vials, etc. Certain problems in the de novo top-down sequencing of amphibian skin peptides are caused by the C-terminal disulfide loop, called the Rana box. Its reduction with or without subsequent derivatization was considered to be an unavoidable step before mass spectrometry. In the present study, EThcD demonstrated its efficiency in sequencing intact disulfide-containing peptides without any preliminary derivatization. Applied to the secretion of three frog species, EThcD provided the full sequence inside the intramolecular disulfide cycle for all S-S-containing peptides found in the samples, with the only exception being diarginine species. Proteolytic fragments, which are shorter than the original peptides, were helpful in some cases. HCD should be mentioned as a complementary tool to the EThcD tool, being useful as a confirmation method for some sequence details.

Comprehensive Analysis of Tryptic Peptides Arising from Disulfide Linkages in NISTmAb and Their Use for Developing a Mass Spectral Library

This work presents methods for identifying and then creating a mass spectral library for disulfide-linked peptides originating from the NISTmAb, a reference material of the humanized IgG1k monoclonal antibody (RM 8671). Analyses involved both partially reduced and non-reduced samples under neutral and weakly basic conditions followed by nanoflow liquid chromatography tandem mass spectrometry (LC–MS/MS). Spectra of peptides containing disulfide bonds are identified by both MS1 ion and MS2 fragment ion data in order to completely map all the disulfide linkages in the NISTmAb. This led to the detection of 383 distinct disulfide-linked peptide ions, arising from fully tryptic cleavage, missed cleavage, irregular cleavage, complex Met/Trp oxidation mixtures, and metal adducts. Fragmentation features of disulfide bonds under low-energy collision dissociation were examined. These include (1) peptide bond cleavage leaving disulfide bonds intact; (2) disulfide bond cleavage, often leading to extensive fragmentation; and (3) double cleavage products resulting from breakages of two peptide bonds or both peptide and disulfide bonds. Automated annotation of various complex MS/MS fragments enabled the identification of disulfide-linked peptides with high confidence. Peptides containing each of the nine native disulfide bonds were identified along with 86 additional disulfide linkages arising from disulfide bond shuffling. The presence of shuffled disulfides was nearly completely abrogated by refining digest conditions. A curated spectral library of 702 disulfide-linked peptide spectra was created from this analysis and is publicly available for free download. Since all IgG1 antibodies have the same constant regions, the resulting library can be used as a tool for facile identification of “hard-to-find” disulfide-bonded peptides. Moreover, we show that one may identify such peptides originating from IgG1 proteins in human serum, thereby serving as a means of monitoring the completeness of protein reduction in proteomics studies. Data are available via ProteomeXchange with identifier PXD023358.

Cysteine residues contribute to the dimerization and enzymatic activity of human nuclear dUTP nucleotidohydrolase (nDut)

dUTPase is an enzyme found in all organisms that have thymine as a constituent of DNA. Through evolution, humans have two major isoforms of dUTPase: a mitochondrial (mDut) and a nuclear (nDut) isoform. The nuclear isoform of dUTPase is a 164‐amino‐acids‐long protein containing three cysteine residues. nDut's starting methionine is post‐translationally cleaved, leaving four unique amino acids on its amino‐terminus including one cysteine residue (C3). These are not present in the mitochondrial isoform (mDut). Using mass spectrometry analyses of recombinant dUTPase constructs, we have discovered an intermolecular disulfide bridge between cysteine‐3 of each nDut monomer. We have found that these two residues stabilize a dimer configuration that is unique to the nDut isoform. We have also uncovered an intramolecular disulfide linkage between cysteine residues C78 and C134, stabilizing the monomeric state of the protein. Of note, both disulfide linkages are essential for nDut's enzymatic activity and dimeric formation can be augmented by the addition of the oxidizing agent, hydrogen peroxide to cells. Analyses of endogenous cellular dUTPase proteins confirm these differences between the two isoforms. We observed that mDut appears to be a mixture of monomer, dimer, and trimer conformations, as well as higher‐order subunit interactions. In contrast, nDut appeared to exist only in monomeric and dimeric forms. Cysteine‐based redox “switches” have recently emerged as a distinct class of post‐translational modification. In light of this and our results, we propose that nDut possesses a redox switch whereby cysteine interactions regulate nDut's dUTP‐hydrolyzing activity.

Top-Down Charge Transfer Dissociation (CTD) of Gas-Phase Insulin: Evidence of a One-Step, Two-Electron Oxidation Mechanism

Top-down analyses of protonated insulin cations of charge states of 4+, 5+, or 6+ were performed by exposing the isolated precursor ions to a beam of helium cations with kinetic energy of more than 6 keV, in a technique termed charge transfer dissociation (CTD). The ~100 ms charge transfer reaction resulted in approximately 20% conversion efficiency to other intact charge exchange products (CTnoD), and a range of low abundance fragment ions. To increase backbone and sulfide cleavages, and to provide better structural information than straightforward MS2 CTD, the CTnoD oxidized products were isolated and subjected to collisional activation at the MS3 level. The MS3 CTD/CID reaction effectively broke the disulfide linkages, separated the two chains, and yielded more structurally informative fragment ions within the inter-chain cyclic region. CTD also provided doubly oxidized intact product ions at the MS2 level, and resonance ejection of the singly oxidized product ion revealed that the doubly oxidized product originates directly from the isolated precursor ion and not from consecutive CTD reactions of a singly oxidized intermediate. MS4 experiments were employed to help identify potential radical cations and diradical cations, but the results were negative or inconclusive. Nonetheless, the two-electron oxidation process is a demonstration of the very large potential energy (>20 eV) available through CTD, and is a notable capability for a 3D ion trap platform. Graphical Abstract ᅟ.

Negative Ion In-Source Decay Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry for Sequencing Acidic Peptides

Matrix-assisted laser desorption/ionization (MALDI) in-source decay was studied in the negative ion mode on deprotonated peptides to determine its usefulness for obtaining extensive sequence information for acidic peptides. Eight biological acidic peptides, ranging in size from 11 to 33 residues, were studied by negative ion mode ISD (nISD). The matrices 2,5-dihydroxybenzoic acid, 2-aminobenzoic acid, 2-aminobenzamide, 1,5-diaminonaphthalene, 5-amino-1-naphthol, 3-aminoquinoline, and 9-aminoacridine were used with each peptide. Optimal fragmentation was produced with 1,5-diaminonphthalene (DAN), and extensive sequence informative fragmentation was observed for every peptide except hirudin(54-65). Cleavage at the N-Cα bond of the peptide backbone, producing c' and z' ions, was dominant for all peptides. Cleavage of the N-Cα bond N-terminal to proline residues was not observed. The formation of c and z ions is also found in electron transfer dissociation (ETD), electron capture dissociation (ECD), and positive ion mode ISD, which are considered to be radical-driven techniques. Oxidized insulin chain A, which has four highly acidic oxidized cysteine residues, had less extensive fragmentation. This peptide also exhibited the only charged localized fragmentation, with more pronounced product ion formation adjacent to the highly acidic residues. In addition, spectra were obtained by positive ion mode ISD for each protonated peptide; more sequence informative fragmentation was observed via nISD for all peptides. Three of the peptides studied had no product ion formation in ISD, but extensive sequence informative fragmentation was found in their nISD spectra. The results of this study indicate that nISD can be used to readily obtain sequence information for acidic peptides.

Mechanisms and energetics of free radical initiated disulfide bond cleavage in model peptides and insulin by mass spectrometry

Direct radical substitution at sulfur initiates disulfide bond cleavage by hydrogen-deficient radicals in peptides and proteins.

We investigate the mechanism of disulfide bond cleavage in gaseous peptide and protein ions initiated by a covalently-attached regiospecific acetyl radical using mass spectrometry (MS). Highly selective S–S bond cleavages with some minor C–S bond cleavages are observed by a single step of collisional activation. We show that even multiple disulfide bonds in intact bovine insulin are fragmented in the MS2 stage, releasing the A- and B-chains with a high yield, which has been challenging to achieve by other ion activation methods. Yet, regardless of the previous reaction mechanism studies, it has remained unclear why (1) disulfide bond cleavage is preferred to peptide backbone fragmentation, and why (2) the S–S bond that requires the higher activation energy conjectured in previously suggested mechanisms is more prone to be cleaved than the C–S bond by hydrogen-deficient radicals. To probe the mechanism of these processes, model peptides possessing deuterated β-carbon(s) at the disulfide bond are employed. It is suggested that the favored pathway of S–S bond cleavage is triggered by direct acetyl radical attack at sulfur with concomitant cleavage of the S–S bond (S_H2). The activation energy for this process is substantially lower by ∼9–10 kcal mol^–1 than those of peptide backbone cleavage processes determined by density functional quantum chemical calculations. Minor reaction pathways are initiated by hydrogen abstraction from the α-carbon or the β-carbon of a disulfide, followed by β-cleavages yielding C–S or S–S bond scissions. The current mechanistic findings should be generally applicable to other radical-driven disulfide bond cleavages with different radical species such as the benzyl and methyl pyridyl radicals.

Integration of electrochemistry with ultra-performance liquid chromatography/mass spectrometry

This study presents the development of ultra-performance liquid chromatography (UPLC) mass spectrometry (MS) combined with electrochemistry (EC) for the first time and its application for the structural analysis of proteins/peptides that contain disulfide bonds. In our approach, a protein/peptide mixture sample undergoes a fast UPLC separation and subsequent electrochemical reduction in an electrochemical flow cell followed by online MS and tandem mass spectrometry (MS/MS) analyses. The electrochemical cell is coupled to the mass spectrometer using our recently developed desorption electrospray ionization (DESI) interface. Using this UPLC/EC/DESI-MS method, peptides that contain disulfide bonds can be differentiated from those without disulfide bonds, as the former are electroactive and reducible. MS/MS analysis of the disulfide-reduced peptide ions provides increased information on the sequence and disulfide-linkage pattern. In a reactive DESI- MS detection experiment in which a supercharging reagent was used to dope the DESI spray solvent, increased charging was obtained for the UPLC-separated proteins. Strikingly, upon online electrolytic reduction, supercharged proteins (e.g., α-lactalbumin) showed even higher charging, which will be useful in top- down protein structure MS analysis as increased charges are known to promote protein ion dissociation. Also, the separation speed and sensitivity are enhanced by approximately 1(~)2 orders of magnitude by using UPLC for the liquid chromatography (LC)/EC/MS platform, in comparison to the previously used high- performance liquid chromatography (HPLC). This UPLC/EC/DESI-MS method combines the power of fast UPLC separation, fast electrochemical conversion, and online MS structural analysis for a potentially valuable tool for proteomics research and bioanalysis.

Integration of online digestion and electrolytic reduction with mass spectrometry for rapid disulfide-containing protein structural analysis

Bottom-up structural analysis of disulfide-bond containing proteins usually involves time-consuming offline enzymatic digestion, chemical reduction and thiol protection prior to mass spectrometric detection, which takes many hours. This paper presents an expedited bottom-up approach, employing desorption electrospray ionization-mass spectrometry (DESI-MS) coupled with online pepsin digestion and online electrochemical reduction of disulfide bonds. Peptides are generated in high digestion yield as its precursor protein in acidic aqueous solution flows through a pepsin column, which can undergo direct electrolysis. The electrolytic behaviors of peptides, as online monitored by DESI-MS, suggest the presence or absence of disulfide bonds in the peptides, and also provide information to relate disulfide bond-containing peptide precursors to their corresponding reduced products. Furthermore, selective electrolysis simply using different reduction potentials can be adopted to generate either partially or fully reduced peptides to assist disulfide bond mapping. In addition, it turns out that DESI is suitable for ionizing peptides in water without organic solvent additives (organic solvent additives would not be compatible with the use of pepsin column). The feasibility of this method was demonstrated using insulin, a protein carrying three pairs of disulfide-bonds as an example, in which all disulfide bond linkages and most of the protein sequence were successfully determined. Strikingly, this method shortens the sample digestion, reduction and MS detection from hours to less than 7 min, which could be of high value in high-throughput proteomics research.

Collision-induced dissociation fragmentation inside disulfide C-terminal loops of natural non-tryptic peptides

Collision-induced dissociation (CID) spectra of long non-tryptic peptides are usually quite complicated and rather difficult to interpret. Disulfide bond formed by two cysteine residues at C-terminus of frog skin peptides precludes one to determine sequence inside the forming loop. Thereby, chemical modification of S-S bonds is often used in "bottom up" sequencing approach. However, low-energy CID spectra of natural non-tryptic peptides with C-terminal disulfide cycle demonstrate an unusual fragmentation route, which may be used to elucidate the "hidden" C-terminal sequence. Low charge state protonated molecules experience peptide bond cleavage at the N-terminus of C-terminal cysteine. The forming isomeric acyclic ions serve as precursors for a series of b-type ions revealing sequence inside former disulfide cycle. The reaction is preferable for peptides with basic lysine residues inside the cycle. It may also be activated by acidic protons of Asp and Glu residues neighboring the loop. The observed cleavages may be quite competitive, revealing the sequence inside disulfide cycle, although S-S bond rupture does not occur in this case.

Automatic determination of disulfide bridges in proteins

Precise determination of disulfide linkages between cysteine (Cys) residues in proteins is essential in the determination of protein structure. Therefore, a reliable automated method for the identification of disulfide bridges can serve as an important tool in the analysis of the tertiary structure of proteins of interest. Here, we describe the current and past methods used to identify disulfide bridges in proteins, with a focus on mass spectrometry (MS)-based methods and a particular emphasis on nanoliquid chromatography-tandem mass spectrometry (nanoLC-MS/MS)-based methods. We also show the development of an easy method based on the separation of disulfide-linked proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis under denaturing and nonreducing conditions and selective in-gel digestion of proteins using reducing and nonreducing conditions, followed by analysis of the resulting peptide mixture by nanoACQUITY UPLC coupled to a quadrupole time-of-flight (QTOF) Micro mass spectrometer (nanoLC-MS/MS). Data-dependent analysis (DDA) nanoLC-MS/MS and information-dependent analysis (IDA) nanoLC-MS/MS were used for random and targeted identification of disulfide-linked peptides. Finally, an example of electrospray-MS (ESI-MS) and ESI-MS/MS-based determination of disulfide-linked peptides is shown.

A negative ion mass spectrometry approach to identify cross-linked peptides utilizing characteristic disulfide fragmentations

Chemical cross-linking combined with mass spectrometry (MS) is an analytical tool used to elucidate the topologies of proteins and protein complexes. However, identification of the low abundance cross-linked peptides and modification sites amongst a large quantity of proteolytic fragments remains challenging. In this work, we present a strategy to identify cross-linked peptides by negative ion MS for the first time. This approach is based around the facile cleavages of disulfide bonds in the negative mode, and allows identification of cross-linked products based on their characteristic fragmentations. MS(3) analysis of the cross-linked peptides allows for their sequencing and identification, with residue specific location of cross-linking sites. We demonstrate the applicability of the commercially available cystine based cross-linking reagent dithiobis(succinimidyl) propionate (DSP) and identify cross-linked peptides from ubiquitin. In each instance, the characteristic fragmentation behavior of the cross-linked species is described. The data presented here indicate that this negative ion approach may be a useful tool to characterize the structures of proteins and protein complexes, and provides the basis for the development of high throughput negative ion MS chemical cross-linking strategies.

Cleavage of Multiple Disulfide Bonds in Insulin via Gold Cationization and Collision-induced Dissociation

Intact bovine insulin, with its two chains linked via two disulfide linkages, has been used as a model system to study the incorporation of one or more gold cations as means for facilitating the cleavage of multiple disulfide bonds in a tandem mass spectrometry experiment. Gas-phase ion/ion reactions involving Au(I)Cl(2) (-) or Au(III)Cl(4) (-) were used to incorporate either one or two gold cations into multiply-protonated insulin cations, followed by ion trap collision-induced dissociation (CID) of the products. The incorporation of a single gold cation followed by CID showed little evidence for disulfide bond cleavage. Rather, the CID spectra were similar to those acquired for the same charge state with only excess protons present. However, the incorporation of two gold cations, regardless of oxidation state, resulted in efficient cleavage of the disulfide bonds connecting the two chains of insulin. Furthermore, ion trap CID of the insulin complexes containing two gold cations showed more sequence information compared to the complexes containing only one gold cation or no gold cations. The partitioning of the gold cations between the two chains upon CID proved to be largely asymmetric, as both gold cations tended to stay together. There appeared to be a slight preference for both gold cations to partition into the B-chain. However, the relatively low contribution from single chain ions with only one gold ion suggests a degree of cooperativity in the overall mechanism for separation of the two chains.

Disulfide bond cleavage in TEMPO-free radical initiated peptide sequencing mass spectrometry

The gas-phase free radical initiated peptide sequencing (FRIPS) fragmentation behavior of o-TEMPO-Bz-conjugated peptides with an intra- and intermolecular disulfide bond was investigated using MS(n) tandem mass spectrometry experiments. Investigated peptides included four peptides with an intramolecular cyclic disulfide bond, Bactenecin (RLCRIVVIRVCR), TGF-α (CHSGYVGVRC), MCH (DFDMLRCMLGRVFRPCWQY) and Adrenomedullin (16-31) (CRFGTCTVQKLAHQIY), and two peptides with an intermolecular disulfide bond. Collisional activation of the benzyl radical conjugated peptide cation, which was generated through the release of a TEMPO radical from o-TEMPO-Bz-conjugated peptides upon initial collisional activation, produced a large number of peptide backbone fragments in which the S-S or C-S bond was readily cleaved. The observed peptide backbone fragments included a-, c-, x- or z-types, which indicates that the radical-driven peptide fragmentation mechanism plays an important role in TEMPO-FRIPS mass spectrometry. FRIPS application of the linearly linked disulfide peptides further showed that the S-S or C-S bond was selectively and preferentially cleaved, followed by peptide backbone dissociations. In the FRIPS mass spectra, the loss of •SH or •SSH was also abundantly found. On the basis of these findings, FRIPS fragmentation pathways for peptides with a disulfide bond are proposed. For the cleavage of the S-S bond, the abstraction of a hydrogen atom at C(β) by the benzyl radical is proposed to be the initial radical abstraction/transfer reaction. On the other hand, H-abstraction at C(α) is suggested to lead to C-S bond cleavage, which yields [ion ± S] fragments or the loss of •SH or •SSH.

Application of MALDI TOF/TOF mass spectrometry and collision-induced dissociation for the identification of disulfide-bonded peptides

This paper describes a method for the fast identification and composition of disulfide-bonded peptides. A unique fragmentation signature of inter-disulfide-bonded peptides is detected using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF mass spectrometry and high-energy collision-induced dissociation (CID). This fragmentation pattern identifies peptides with an interconnected disulfide bond and provides information regarding the composition of the peptides involved in the pairing. The distinctive signature produced using CID is a triplet of ions resulting from the cleavage of the disulfide bond to produce dehydroalanine, cysteine or thiocysteine product ions. This method is not applicable to intra-peptide disulfide bonds, as the cleavage mechanism is not the same and a triplet pattern is not observed. This method has been successfully applied to identifying disulfide-bonded peptides in a number of control digestions, as well as study samples where disulfide bond networks were postulated and/or unknown.

Induction and identification of disulfide-intact and disulfide-reduced β-subunit of Shiga toxin 2 from Escherichia coli O157:H7 using MALDI-TOF-TOF-MS/MS and top-down proteomics

The disulfide-intact and disulfide-reduced β-subunit of Shiga toxin 2 (β-Stx2) from Escherichia coli O157:H7 (strain EDL933) has been identified by matrix-assisted laser desorption/ionization time-of-flight-time-of-flight tandem mass spectrometry (MALDI-TOF-TOF-MS/MS) and top-down proteomic analysis using software developed in-house. E. coli O157:H7 was induced to express Stx2 by culturing on solid agar media supplemented with 10-50 ng mL(-1) of ciprofloxacin (CP). Bacterial cell lysates at each CP concentration were analyzed by MALDI-TOF-MS. A prominent ion at mass-to-charge (m/z) ~7820 was observed for the CP concentration range: 10-50 ng mL(-1), reaching a maximum signal intensity at 20 ng mL(-1). Complex MS/MS data were obtained of the ion at m/z ~7820 by post-source decay resulting in top-down proteomic identification as the mature, signal peptide-removed, disulfide-intact β-Stx2. Eight fragment ion triplets (each spaced Δm/z ~33 apart) were also observed resulting from backbone cleavage between the two cysteine residues (that form the intra-molecular disulfide bond) and symmetric and asymmetric cleavage of the disulfide bond. The middle fragment ion of each triplet, from symmetric disulfide bond cleavage, was matched to an in silico fragment ion formed from cleavage of the backbone at a site adjacent to an aspartic acid or glutamic acid residue. The flanking fragment ions of each triplet, from asymmetric disulfide bond cleavage, were not matched because their corresponding in silico fragment ions are not represented in the database. Easier to interpret MS/MS data were obtained for the disulfide-reduced β-Stx2 which resulted in an improved top-down identification.

Studying disulfide bond rearrangement by MALDI-RTOF PSD and MALDI-TOF/RTOF high-energy CID (20 keV) experiments of peptides derived from ammodytoxins

Ammodytoxins (Atxs) are presynaptically neurotoxic phospholipases present in Vipera ammodytes ammodytes snake venom. Atxs show a high sequence homology and contain 14 cysteines which form seven biologically relevant disulfide bridges-connecting non-neighboring cysteines. Formic acid cleavage was performed to confirm protein sequences by MALDI RTOF MS and resulted in 95.6% sequence coverage exhibiting only few formylations. Cysteine-containing peptides showed adjacent signals 2 and/or 4 Da lower (according to the number of cysteines present in the peptide) than the theoretical molecular weight indicating disulfide bridge rearrangement. Post-source decay (PSD) and high-energy collision-induced dissociation (CID) at 20 keV experiments showed fragmentation pattern unique for the reduced, thiol group containing and the oxidized, disulfide bridge harboring peptides. Besides typical low-energy fragment ions observed during PSD experiments (a-, b-, y-type ions), additional high-energy fragment ions (c-, x-, w-, d-type and internal fragments) of significant intensity were generated during fragmentation at 20 keV. In the case of charge directing N- and C-termini, x- and w-type ions were also observed during PSD. Good and up to complete sequence coverage was achieved for all studied peptides from Atxs in the case of high-energy CID, whereas PSD lacked information particularly for larger peptides.

Matrix-assisted laser desorption/ionization-post source decay fragmentation of cystine- containing amphibian peptides with novel cysteine tags

Long disulphide-containing peptides brevinins 1E and 2Ec from the skin secretion of the frog Rana ridibunda were reduced and alkylated with ten novel and three known derivatizing agents. Nine of novel reagents are maleimide derivatives. The peptides were also reduced with DTT directly onto the MALDI target without alkylation. Modified samples were subjected to MALDI-PSD study. Procedures, fragmentation patterns, fragment ion signal abundances and sequence coverage for two peptides modified with thirteen tags (or on-plate reduced) are described. The fast on-plate procedure for reduction/alkylation was applied to Rana ridibunda crude secretion, providing intensive signals of derivatized peptides. The corresponding ions may be used for the MS/MS sequencing procedure.

Desulfurization of cysteine-containing peptides resulting from sample preparation for protein characterization by mass spectrometry

In this study, we have examined two cysteine modifications resulting from sample preparation for protein characterization by mass spectrometry (MS): (1) a previously observed conversion of cysteine into dehydroalanine, now found in the case of disulfide mapping and (2) a novel modification corresponding to conversion of cysteine into alanine. Using model peptides, the conversion of cysteine into dehydroalanine via beta-elimination of a disulfide bond was seen to result from the conditions of typical tryptic digestion (37 degrees C, pH 7.0-9.0) without disulfide reduction and alkylation. Furthermore, the surprising conversion of cysteine into alanine was shown to occur by heating cysteine-containing peptides in the presence of a phosphine (tris(2-carboxyethyl)phosphine hydrochloride (TCEP)). The formation of alanine from cysteine, investigated by performing experiments in H(2)O or D(2)O, suggested a radical-based desulfurization mechanism unrelated to beta-elimination. Importantly, an understanding of the mechanism and conditions favorable for cysteine desulfurization provides insight for the establishment of improved sample preparation procedures of protein analysis.

Wavelength Dependence On The Level Of Post-Source Metastable Ion Decay Observed In Infrared Matrix-Assisted Laser Desorption Ionization

The levels of post-source metastable ion decay (PSD) observed in several peptides and proteins ionized by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI TOF-MS) are measured utilizing both infrared (IR) and ultraviolet (UV) desorption wavelengths. A gridless deceleration ion optic is employed to temporally separate stable analyte ions from analyte metastable neutral and ion fragments. Comparisons of the extent of PSD that is observed in UV-MALDI at 337 nm and IR-MALDI at multiple wavelengths between 2.8 and 3.0 mum are made using the same matrices and analytes. The amount of PSD observed using IR-MALDI was found to be highly dependent on the specific IR wavelength (2.8-3.0 mum) employed for desorption. IR wavelengths shorter than 2.86 mum tended to produce higher levels of PSD, while longer IR wavelengths typically produced significantly less PSD when using a number of common MALDI matrices. Relative PSD levels are quantified by determining the percentage of the neutral fragment signal intensity to the intensity of the stable singly protonated molecular species observed in decelerated MALDI spectra. These studies suggest that an analyte ion activation pathway leading to significant PSD in IR-MALDI may proceed by way of vibrational excitation of the analyte molecules during the desorption event.

Dissociation of disulfide-intact somatostatin ions: the roles of ion type and dissociation method

The dissociation chemistry of somatostatin-14 was examined using various tandem mass spectrometry techniques including low-energy beam-type and ion trap collision-induced dissociation (CID) of protonated and deprotonated forms of the peptide, CID of peptide-gold complexes, and electron transfer dissociation (ETD) of cations. Most of the sequence of somatostatin-14 is present within a loop defined by the disulfide linkage between Cys-3 and Cys-14. The generation of readily interpretable sequence-related ions from within the loop requires the cleavage of at least one of the bonds of the disulfide linkage and the cleavage of one polypeptide backbone bond. CID of the protonated forms of somatostatin did not appear to give rise to an appreciable degree of dissociation of the disulfide linkage. Sequential fragmentation via multiple alternative pathways tended to generate very complex spectra. CID of the anions proceeded through CH(2)-S cleavages extensively but relatively few structurally diagnostic ions were generated. The incorporation of Au(I) into the molecule via ion/ion reactions followed by CID gave rise to many structurally relevant dissociation products, particularly for the [M+Au+H](2+) species. The products were generated by a combination of S-S bond cleavage and amide bond cleavage. ETD of the [M+3H](3+) ion generated rich sequence information, as did CID of the electron transfer products that did not fragment directly upon electron transfer. The electron transfer results suggest that both the S-S bond and an N-C(alpha) bond can be cleaved following a single electron transfer reaction.

Determination with matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry of the extensive disulfide bonding in tarantula venom peptide Psalmopeotoxin I

Psalmopeotoxin I (PcFK1) is a 33-residue peptide isolated from the venom of the tarantula Psalmopoeus cambridgei. This peptide specifically inhibits the intra-erythrocyte stage of Plasmodium falciparum in vitro. It contains six cysteine residues forming three disulfide bridges and belongs to the superfamily of natural peptides containing the inhibitor cystine knot (ICK) fold. We produced the wild-type and mutated forms of the recombinant peptide to examine the mechanism of action of PcFK1. The purified toxins were consistently produced as two isobaric peptides (r-PcFK1-1 and r-PcFK1-2) with different retention properties but identical anti-plasmodial -biological activity. Comparison of (15)N-NMR heteronuclear single quantum correlation spectra revealed that although rPcFK1-1 was highly structured, rPcFK1-2 does not have a stable three-dimensional structure. We used high-energy collision-induced fragmentation of the peptides with a matrix-assisted laser desorption/ionization tandem time-of- flight mass spectrometer to further investigate the structure of the native peptides in its natural form and produced in E. coli. The fragmentation spectra of the native peptides were very complex due to the occurrence in the spectrum of ions resulting from (1) cross-linking of fragments through a disulfide bridge and (2) asymmetric fragmentations of the disulfide bridges and (3) multiple neutral losses. The tandem mass spectrometry fragmentation pattern of r-PcFK1-1 was similar to that of the natural peptide isolated from crude venom, but r-PcFK1-2 had a clearly distinct fragmentation pattern, more closely resembling the fragmentation spectra of reduced and alkylated peptides. Observed ions could be attributed to specific fragments by comparing spectra between the wild-type and selected variants with point mutations (Y11W, R20T, Y26W, K28V). The disulfide connections in r-PcFK1-2 differed from those of the native peptide and showed a rare disulfide bridge between vicinal cysteine residues. The r-PcFK1_(R20T) variant showed a very limited fragmentation pattern when analyzed in positive mode but displayed much more fragmentation in negative mode pointing out the importance of the R20 residue in the fragmentation of PcFK1. Using the reductive matrix 1,5-diaminonaphtalene promoted strongly in source decay fragmentation of the peptides in MS mode. Our findings illustrated the critical role of the electronic environment around the central Cys(18)-Cys(19) doublet in PcFK1 in internal fragmentation of the peptide.

Mass spectrometry profiles superoxide-induced intramolecular disulfide in the FMN-binding subunit of mitochondrial Complex I

Protein thiols with regulatory functions play a critical role in maintaining the homeostasis of the redox state in mitochondria. One major host of regulatory cysteines in mitochondria is Complex I, with the thiols primarily located on its 51 kDa FMN-binding subunit. In response to oxidative stress, these thiols are expected to form intramolecular disulfide bridges as one of their oxidative post-translational modifications. Here, to test this hypothesis and gain insights into the molecular pattern of disulfide in Complex I, the isolated bovine Complex I was prepared. Superoxide (O(2)(.-)) is generated by Complex I under the conditions of enzyme turnover. O(2)(.-)-induced intramolecular disulfide formation at the 51, kDa subunit was determined by tandem mass spectrometry and database searching, with the latter accomplished by adaptation of the in-house developed database search engine, MassMatrix [Xu, H., et al., J. Proteome Res. 2008, 7, 138-144]. LC/MS/MS analysis of tryptic/chymotryptic digests of the 51 kDa subunit from alkylated Complex I revealed that four specific cysteines (C(125), C(142), C(187), and C(206)) of the 51 kDa subunit were involved in the formation of mixed intramolecular disulfide linkages. In all, three cysteine pairs were observed: C(125)/C(142), C(187)/C(206), and C(142)/C(206). The formation of disulfide bond was subsequently inhibited by superoxide dismutase, indicating the involvement of O(2)(.-). These results elucidated by mass spectrometry indicate that the residues of C(125), C(142), C(187), and C(206) are the specific regulatory cysteines of Complex I and they participate in the oxidative modification with disulfide formation under the physiological or pathophysiological conditions of oxidative stress.

NMR-based mapping of disulfide bridges in cysteine-rich peptides: application to the mu-conotoxin SxIIIA

Disulfide-rich peptides represent a megadiverse group of natural products with very promising therapeutic potential. To accelerate their functional characterization, high-throughput chemical synthesis and folding methods are required, including efficient mapping of multiple disulfide bridges. Here, we describe a novel approach for such mapping and apply it to a three-disulfide-bridged conotoxin, mu-SxIIIA (from the venom of Conus striolatus), whose discovery is also reported here for the first time. Mu-SxIIIA was chemically synthesized with three cysteine residues labeled 100% with (15)N/(13)C, while the remaining three cysteine residues were incorporated using a mixture of 70%/30% unlabeled/labeled Fmoc-protected residues. After oxidative folding, the major product was analyzed by NMR spectroscopy. Sequence-specific resonance assignments for the isotope-enriched Cys residues were determined with 2D versions of standard triple-resonance ((1)H, (13)C, (15)N) NMR experiments and 2D [(13)C, (1)H] HSQC. Disulfide patterns were directly determined with cross-disulfide NOEs confirming that the oxidation product had the disulfide connectivities characteristic of mu-conotoxins. Mu-SxIIIA was found to be a potent blocker of the sodium channel subtype Na(V)1.4 (IC50 = 7 nM). These results suggest that differential incorporation of isotope-labeled cysteine residues is an efficient strategy to map disulfides and should facilitate the discovery and structure-function studies of many bioactive peptides.

Determination of disulfide bond patterns in laminin beta1 chain N-terminal domains by nano-high-performance liquid chromatography/matrix-assisted laser desorption/ionization time-of-flight/time-of-flight mass spectrometry

The disulfide bonding patterns in the N-terminal (LN) domains of the basement membrane protein laminin beta1 have not been investigated so far. We report an in-depth mass spectrometric analysis using offline nano-high-performance liquid chromatography/matrix-assisted laser desorption/ionization time-of-flight/time-of-flight mass spectrometry (nano-HPLC/MALDI-TOF/TOF-MS) for determining the disulfide bond patterns in the LN-domain of recombinant mouse laminin beta1 chain for the first time. Mass spectra were recorded and the putatively disulfide-linked peptides were subjected to LIFT-TOF/TOF-MS to confirm the disulfide bond. Screening the fragment ion mass spectra of disulfide-linked peptides for characteristic 66-amu patterns (34 u +32 u), arising from symmetric and asymmetric cleavage of disulfide bonds, facilitated their identification. Using various enzymes for proteolytic digestion of a recombinant laminin beta1 chain N-terminal protein fragment, a linear bonding pattern of the eight cysteine residues in the LN-domain of the laminin beta1 chain was observed with a (1-2, 3-4, 5-6, 7-8) connectivity of cysteines. The identical disulfide-bonding pattern was found in E4, the N-terminal laminin beta1 chain fragment derived by elastase digestion of mouse tumor laminin-111, confirming that this pattern also occurs in native laminin.

Preliminary mechanistic information on disulfide-bond formation and the role of hydrogen bonds by nanoelectrospray mass spectrometry

The formation of disulfide-bonds is vital for the proper folding of most secreted proteins and the stabilization of the final protein structure, including many of medical importance. The determination of disulfide-bonds is an important aspect of gaining a comprehensive understanding of the chemical structure of a protein. A long-term goal of ours is to examine the mechanism of disulfide-bond formation in aqueous solution and the potential role hydrogen bonds play in this process. Here, we report preliminary results from a method that utilizes the oxidizing power of iodine to generate disulfide bonds from synthesized model compounds, which is followed by nanoelectrospray ionization (nanoESI)- mass spectrometry (MS). By continuously monitoring the reaction mixture during disulfide formation, this nanoESI approach provides insight on the sequence of intermediate species formed, and how hydrogen-bonding donor/acceptor pairs may promote disulfide bond formation.

Identification and characterization of disulfide bonds in proteins and peptides from tandem MS data by use of the MassMatrix MS/MS search engine

A new database search algorithm has been developed to identify disulfide-linked peptides in tandem MS data sets. The algorithm is included in the newly developed tandem MS database search program, MassMatrix. The algorithm exploits the probabilistic scoring model in MassMatrix to achieve identification of disulfide bonds in proteins and peptides. Proteins and peptides with disulfide bonds can be identified with high confidence without chemical reduction or other derivatization. The approach was tested on peptide and protein standards with known disulfide bonds. All disulfide bonds in the standard set were identified by MassMatrix. The algorithm was further tested on bovine pancreatic ribonuclease A (RNaseA). The 4 native disulfide bonds in RNaseA were detected by MassMatrix with multiple validated peptide matches for each disulfide bond with high statistical scores. Fifteen nonnative disulfide bonds were also observed in the protein digest under basic conditions (pH = 8.0) due to disulfide bond interchange. After minimizing the disulfide bond interchange (pH = 6.0) during digestion, only one nonnative disulfide bond was observed. The MassMatrix algorithm offers an additional approach for the discovery of disulfide bond from tandem mass spectrometry data.

Protein sequence information by matrix-assisted laser desorption/ionization in-source decay mass spectrometry

Proteins from biological samples are often identified by mass spectrometry (MS) with the two following "bottom-up" approaches: peptide mass fingerprinting or peptide sequence tag. Nevertheless, these strategies are time-consuming (digestion, liquid chromatography step, desalting step), the N- (or C-) terminal information often lacks and post-translational modifications (PTMs) are hardly observed. The in-source decay (ISD) occurring in a matrix assisted laser desorption/ionization (MALDI) source appears an interesting analytical tool to obtain N-terminal sequence, to identify proteins and to characterize PTMs by a "top-down" strategy. The goal of this review deals with the usefulness of the ISD technique in MALDI source in proteomics fields. In the first part, the ISD principle is explained and in the second part, the use of ISD in proteomic studies is discussed for protein identification and sequence characterization.

A novel salt bridge mechanism highlights the need for nonmobile proton conditions to promote disulfide bond cleavage in protonated peptides under low-energy collisional activation

The gas-phase fragmentation mechanisms of small models for peptides containing intermolecular disulfide links have been studied using a combination of tandem mass spectrometry experiments, isotopic labeling, structural labeling, accurate mass measurements of product ions, and theoretical calculations (at the MP2/6-311 + G(2d,p)//B3LYP/3-21G(d) level of theory). Cystine and its C-terminal derivatives were observed to fragment via a range of pathways, including loss of neutral molecules, amide bond cleavage, and S-S and C-S bond cleavages. Various mechanisms were considered to rationalize S-S and C-S bond cleavage processes, including charge directed neighboring group processes and nonmobile proton salt bridge mechanism. Three low-energy fragmentation pathways were identified from theoretical calculations on cystine N-methyl amide: (1) S-S bond cleavage dominated by a neighboring group process involving the C-terminal amide N to form either a protonated cysteine derivative or protonated sulfenyl amide product ion (44.3 kcal mol(-1)); (2) C-S bond cleavage via a salt bridge mechanism, involving abstraction of the alpha-hydrogen by the N-terminal amino group to form a protonated thiocysteine derivative (35.0 kcal mol(-1)); and (3) C-S bond cleavage via a Grob-like fragmentation process in which the nucleophilic N-terminal amino group forms a protonated dithiazolidine (57.9 kcal mol(-1)). Interestingly, C-S bond cleavage by neighboring group processes have high activation barriers (63.1 kcal mol(-1)) and are thus not expected to be accessible during low-energy CID experiments. In comparison to the energetics of simple amide bond cleavage, these S-S and C-S bond cleavage reactions are higher in energy, which helps rationalize why bond cleavage processes involving the disulfide bond are rarely observed for low-energy CID of peptides with mobile proton(s) containing intermolecular disulfide bonds. On the other hand, the absence of a mobile proton appears to "switch on" disulfide bond cleavage reactions, which can be rationalized by the salt bridge mechanism. This potentially has important ramifications in explaining the prevalence of disulfide bond cleavage in singly protonated peptides under MALDI conditions.

Disulfide bond cleavages observed in SORI-CID of three nonapeptides complexed with divalent transition-metal cations

Tandem MS sequencing of peptides that contain a disulfide bond is often hampered when using a slow heating technique. We show that complexation of a transition-metal ion with a disulfide-bridge-containing nonapeptide yields very rich tandem mass spectra, including fragments that involve the cleavage of the disulfide bond up to 56% of the total product ion intensity. On the contrary, MS/MS of the corresponding protonated nonapeptides results predominantly in fragments from the region that is not involved in the disulfide bond. Eleven different combinations of three nonapeptides and three metal ions were measured using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) combined with sustained off-resonance irradiation collision induced dissociation (SORI-CID). All observed fragments are discussed with respect to four different types of product ions: neutral losses, b/y-fragmentation with and without the disulfide bond cleavage, and losses of internal amino acids without rupture of the disulfide bridge. Furthermore, it is shown that the observed complementary fragment pairs obtained from peptide-metal complexes can be used to determine the region of the binding site of the metal ion. This approach offers an efficient way to cleave disulfide-bridged structures using low energy MS/MS, which leads to increased sequence coverage and more confidence in peptide or protein assignments.

The disulfide bond pattern of salmon egg lectin 24K from the Chinook salmon Oncorhynchus tshawytscha

The disulfide bonds in the galactose-specific lectin SEL 24K from the egg of the Chinook salmon Oncorhynchus tshawytscha were determined by mass spectrometry. Four predictive in silico tools were used to determine the oxidation state of cysteines in the sequence and possible location of the disulfide bonds. A combination of tryptic digestion, HPLC separation, and chemical modifications were used to establish the location of seven disulfide bonds and one pair of free cysteines. After proteolysis, peptides containing one or two disulfide bonds were identified by reduction and mass spectral comparison. MALDI mass spectrometry was supported by chemical modification (iodoacetamide) and in silico digestion. The assignments of disulfide bonds were further confirmed by mass spectral fragmentation studies including in-source dissociation (ISD) and collision-induced dissociation (CID). The experimentally determined disulfide bonds and free Cys residues were only partially consistent with those generated by several automated public-domain algorithms.

Identification of an intermolecular disulfide bond in barley hemoglobin

Barley class-1 hemoglobin (Hb) and its mutated version (Cys(79) replaced by Ser) were overexpressed in Escherichia coli and purified to near homogeneity. Nano-electrospray ionization mass spectrometry (nano-ESI MS) showed that the mutated barley Hb was more readily dissociated to a monomer and was more susceptible to denaturation than the native form. The mutated Hb was oxidized to the ferric state approximately 10(3) times faster than the non-mutated form. The increased oxidation of the mutated Hb was a result of substitution of the cysteine with a serine and not a consequence of monomer formation, per se. Tandem mass spectrometry (MS/MS) analysis revealed that Cys(79) participated in intermolecular S-S bond formation. The rates of nitric oxide scavenging by non-mutated and mutated Hb were similar. We conclude that the cysteine residue is an important contributor to the quaternary and tertiary structure of barley hemoglobin. It however has no direct effect on nitric oxide-scavenging activity of barley Hb.

Rapid sequencing and disulfide mapping of peptides containing disulfide bonds by using 1,5-diaminonaphthalene as a reductive matrix

MS/MS is indispensable for the amino acid sequencing of peptides. However, its use is limited for peptides containing disulfide bonds. We have applied the reducing properties of 1,5-diaminonaphthalene (1,5-DAN) as a MALDI matrix to amino acid sequencing and disulfide bond mapping of human urotensin II possessing one disulfide bond, and human guanylin possessing two disulfide bonds. 1,5-DAN was used in the same manner as the usual MALDI matrices without any pre-treatment of the peptide, and MS/MS was performed using a matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight mass spectrometer (MALDI QIT TOFMS). The results demonstrated that MS/MS of the molecular ions reduced by 1,5-DAN provided a series of significant b-/y-product ions. All 11 amino acid residues of urotensin II were identified using 1,5-DAN, while only 5 out of 11 residues were identified using 2,5-dihydroxybenzoic acid (DHB); similarly 11 out of 15 amino acid residues of guanylin were identified using 1,5-DAN, while only three were identified using DHB. In addition, comparison of the theoretical and measured values of the mass differences between corresponding MS/MS product ions using 1,5-DAN and DHB narrowed down the possible disulfide bond arrangement candidates. Consequently, 1,5-DAN as a reductive matrix facilitates rapid amino acid sequencing and disulfide mapping for peptides containing disulfide bonds.

Differential induction of glioblastoma migration and growth by two forms of pleiotrophin

Glioblastoma is the most common malignant brain tumor of adults and one of the most lethal cancers. The secreted growth factor pleiotrophin (PTN) promotes glioblastoma migration and proliferation, initiating its oncogenic activities through two cell surface receptors, the protein tyrosine phosphatase receptor zeta (PTPRZ1) and the anaplastic lymphoma kinase (ALK), respectively. Here, we report on the presence and purification of two naturally occurring forms of PTN (18 and 15 kDa) that differentially promote glioblastoma migration and proliferation. Using a panel of glioblastoma cell lines, including low passage patient-derived cultures, we demonstrate that PTN15 promotes glioblastoma proliferation in an ALK-dependent fashion, whereas immobilized PTN18 promotes haptotactic migration of glioblastoma cells in a PTPRZ1-dependent fashion. Mass spectrometric analysis indicated that PTN15 differs from PTN18 by processing of 12 C-terminal amino acids. To demonstrate clinical relevance, we show that PTN15, PTN18, and PTPRZ1 are significantly overexpressed in glioblastoma relative to normal brain at both mRNA and protein levels using microarray, Western blot, and tissue microarray analyses on human tumors. These results indicate that the PTN18-PTPRZ1 and the PTN15-ALK signaling pathways represent potentially important therapeutic targets for glioblastoma invasion and growth.

Optimization of a MALDI TOF-TOF mass spectrometer for intact protein analysis

A MALDI TOF-TOF instrument was optimized and evaluated for intact protein analysis by tandem mass spectrometry. Ion source voltages and delay times were adjusted to affect an up to a 10-fold improvement in fragment ion yield compared to data obtained using default settings employed in peptide analysis. For large peptides (3-4.5 kDa), up to 90% of all possible b- and y-fragment ions were observed, which provides sufficient information for de novo sequencing and unambiguous protein identification. Product ion signals associated with preferential cleavages C-terminal to aspartic acid and glutamic acid residues and N-terminal to proline residues became dominant with increased protein molecular weight. Matrix effects were also evaluated and, among the eight matrices examined, alpha-cyano-4-hydroxycinnamic acid (CHCA) was found to produce the best intact protein tandem mass spectra for proteins up to 12 kDa. Optimized performance yielded detection limits of 50-125 fmol for proteins of 4 and 12 kDa, respectively. This improved performance has yielded an instrument with potential to be a useful tool in proteomic investigations via analysis of intact proteins.

Collision-activated cleavage of a peptide/antibiotic disulfide linkage: possible evidence for intramolecular disulfide bond rearrangement upon collisional activation

Ceftiofur is an important veterinary beta-lactam antibiotic whose bioactive metabolite, desfuroylceftiofur, has a free thiol group. Desfuroylceftiofur (DFC) was reacted with two peptides, [Arg8]-vasopressin and reduced glutathione, both of which have cysteine residues to form disulfide-linked peptide/antibiotic complexes. The products of the reaction, [vasopressin + (DFC-H) + (DFC-H) + H]+, [(vasopressin+H) + (DFC-H) + H]+ and [(glutathione-H) + (DFC-H) + H]+, were analyzed using collision-activated dissociation (CAD) with a quadrupole ion trap tandem mass spectrometer. MS/MS of [vasopressin + (DFC-H) + (DFC-H) + H]+ resulted in facile dissociative loss of one and two covalently bound DFC moieties. Loss of one DFC resulted from either homolytic or heterolytic dissociation of the peptide/antibiotic disulfide bond with equal or unequal partitioning of the two sulfur atoms between the fragment ion and neutral loss. Hydrogen migration preceded heterolytic dissociation. Loss of two DFC moieties from [vasopressin + (DFC-H) + (DFC-H) + H]+ appears to result from collision-activated intramolecular disulfide bond rearrangement (IDBR) to produce cyclic [vasopressin + H]+ (at m/z 1084) as well as other cyclic fragment ions at m/z 1084 +/- 32 and +64. The cyclic structure of these ions could only be inferred as MS/MS may result in rearrangement to non-cyclic structures prior to dissociative loss. IDBR was also detected from MS(3) experiments of [vasopressin + (DFC-H) + (DFC-H) + H]+ fragment ions. MS/MS of [(glutathione-H) + (DFC-H) + H]+ resulted in cleavage of the peptide backbone with retention of the DFC moiety as well as heterolytic cleavage of the peptide/antibiotic disulfide bond to produce the fragment ion: [(DFC-2H) + H]+. These results demonstrate the facile dissociative loss by CAD of DFC moieties covalently attached to peptides through disulfide bonds. Published in 2004 by John Wiley & Sons, Ltd.

Determination of disulfide bond assignment of human vitamin K-dependent gamma-glutamyl carboxylase by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Vitamin K-dependent gamma-glutamyl carboxylase is a 758 amino acid integral membrane glycoprotein that catalyzes the post-translational conversion of certain protein glutamate residues to gamma-carboxyglutamate. Carboxylase has ten cysteine residues, but their form (sulfhydryl or disulfide) is largely unknown. Pudota et al. in Pudota, B. N., Miyagi, M., Hallgren, K. W., West, K. A., Crabb, J. W., Misono, K. S., and Berkner, K. L. (2000) Proc. Natl. Acad. Sci. U. S. A. 97, 13033-13038 reported that Cys-99 and Cys-450 are the carboxylase active site residues. We determined the form of all cysteines in carboxylase using in-gel protease digestion and matrix-assisted laser desorption/ionization mass spectrometry. The spectrum of non-reduced, trypsin-digested carboxylase revealed a peak at m/z 1991.9. Only this peak disappeared in the spectrum of the reduced sample. This peak's m/z is consistent with the mass of peptide 92-100 (Cys-99) disulfide-linked with peptide 446-453 (Cys-450). To confirm its identity, the m/z 1991.9 peak was isolated by a timed ion selector as the precursor ion for further MS analysis. The fragmentation pattern exhibited two groups of triplet ions characteristic of the symmetric and asymmetric cleavage of disulfide-linked tryptic peptides containing Cys-99 and Cys-450. Mutation of either Cys-99 or Cys-450 caused loss of enzymatic activity. We created a carboxylase variant with both C598A and C700A, leaving Cys-450 as the only remaining cysteine residue in the 60-kDa fragment created by limited trypsin digestion. Analysis of this fully active mutant enzyme showed a 30- and the 60-kDa fragment were joined under non-reducing conditions, thus confirming Cys-450 participates in a disulfide bond. Our results indicate that Cys-99 and Cys-450 form the only disulfide bond in carboxylase.

Synthesis of the C-terminal domain of the tissue inhibitor of metalloproteinases-1 (TIMP-1)

According to recent investigations, the C-terminal domain of the tissue inhibitor of matrix metalloproteinases-1 (TIMP-1) is responsible for some biological effects that are independent of the enzyme-inhibiting effect of the N-terminal domain of the molecule. The C-terminal domain has been prepared for structure-biological activity investigations. After the chemical synthesis and the folding of the linear peptide. LC-MS and MALDI-MS analysis revealed that two isomers with different disulphide bond arrangements were formed. Since more than 30 folding experiments resulted in products with a very similar HPLC-profile, it was concluded that in the absence of the TIMP-1 N-terminal domain no entirely correct folding of the C-terminal domain occurred. Furthermore, it was observed that, in spite of several purification steps, mercury(II) ions were bound to the 6SH-linear peptide; it was demonstrated--using disulphide bonded TIMP-1(Cys145-Cys166) as a model--that mercury(II) ions can cause peptide degradation at pH 7.8 as well as in 0.1% trifluoroacetic acid.

Intact protein analysis by matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry

Direct tandem mass spectrometric (MS/MS) analysis of small, singly charged protein ions by tandem time-of-flight mass spectrometry (TOFMS) is demonstrated for proteins up to a molecular mass of 12 kDa. The MALDI-generated singly charged precursor ions predominantly yield product ions resulting from metastable fragmentation at aspartyl and prolyl residues. Additional series of C-terminal sequence ions provide in some cases sufficient information for protein identification. The amount of sample required to obtain good quality spectra is in the high femtomolar to low picomolar range. Within this range, MALDI-MS/MS using TOF/TOF trade mark ion optics now provides the opportunity for direct protein identification and partial characterization without prior enzymatic hydrolysis.

Complete disulfide bond assignment of a recombinant immunoglobulin G4 monoclonal antibody

Recombinant monoclonal antibodies (mAbs) are an emerging therapeutic area. However, there are few reports on disulfide bond assignment of recombinant mAbs. This work describes the complete disulfide bond assignment of a recombinant immunoglobulin G4 (IgG4) mAb. N-ethylmaleimide (NEM) was used to mask free sulfhydryl groups present in the mAb. Digestion of the mAb with endoproteinase Lys-C without disulfide scrambling was achieved by denaturing the mAb in the presence of NEM in guanidine hydrochloride (GuHCl). The Lys-C digest was subsequently reduced with dithiothreitol (DTT). Native and reduced Lys-C digests were mass analyzed by on-line reversed-phase-high-performance liquid chromatography mass spectrometry (RP-HPLC/MS). Disulfide-containing peptides were sequenced by off-line nanoelectrospray quadrupole time-of-flight mass spectrometry (nanoESI-QTOF MS) and N-terminal Edman sequencing for verifying connectivities. The recombinant IgG4 mAb was found to contain the expected disulfide linkages with the proposed method. The NEM alkylating reagent was critical in minimizing disulfide scrambling during the denaturation and digestion of the mAb. This integrated approach, combining MS and N-terminal Edman sequencing, was capable of assigning the disulfide pattern of the IgG4 mAb rapidly and completely, and should be applicable for disulfide bond assignment and structural analysis of other mAbs and large proteins with multiple disulfide bonds.